THIS SLIDE IS FROM RAZAVI,ON FLIP-FLOPS,DESIGN OF ANALOG CMOS INTEGRATED CIRCUITS PRESENTED BY BCE 8TH SEMESTER ENGINEERING STUDENTS TO PROF. RAVITESH MISHRA
THIS SLIDE IS FROM RAZAVI,ON FLIP-FLOPS,DESIGN OF ANALOG CMOS INTEGRATED CIRCUITS PRESENTED BY BCE 8TH SEMESTER ENGINEERING STUDENTS TO PROF. RAVITESH MISHRA
This presentation was made for student batch 2017-2018 of MBSTU. Here we will get
IEEE 32 bit floating representation .
IEEE 754 floating point representation
32 bit floating point Addition
The Read/Write Control logic interfaces the 8251A with CPU, determines the functions of the 8251A according to the control word written into its control register.
It monitors the data flow.
This section has three registers and they are control register, status register and data buffer.
The active low signals RD, WR, CS and C/D(Low) are used for read/write operations with these three registers.
When C/D(low) is high, the control register is selected for writing control word or reading status word.
When C/D(low) is low, the data buffer is selected for read/write operation.
When the reset is high, it forces 8251A into the idle mode.
The clock input is necessary for 8251A for communication with CPU and this clock does not control either the serial transmission or the reception rate.ThesisScientist.com
FNIRSI SG-004A Multi-function Signal Generator User Manual
FNIRSI SG-004A Multi-function Signal Generator 0-24V 4-20mA Analog Voltage Current Thermocouple Resistance Process Calibrator
Very Large Integrated Circuit (VLSI) is a domain where the nano work has been done over millions of transistors and diode and even on other electronics components. Every electronics devices available in market definitely consist of tiny electronics component. Funnel shifter is one of the most important element in any macro electronics devices which is responsible to do logical shifting of binary bits. So, how to make it using electric software and do testing whether the function which has been applied to make this element is right or not that is described here.
For more details : https://github.com/shahsamkit73/funnel-shifter
In this third class we will continue our exploration of positional number systems, switching gears to examine binary and hexadecimal systems. We will also examine a problem-solving approach that is used by programmers - the IPO method.
This presentation was made for student batch 2017-2018 of MBSTU. Here we will get
IEEE 32 bit floating representation .
IEEE 754 floating point representation
32 bit floating point Addition
The Read/Write Control logic interfaces the 8251A with CPU, determines the functions of the 8251A according to the control word written into its control register.
It monitors the data flow.
This section has three registers and they are control register, status register and data buffer.
The active low signals RD, WR, CS and C/D(Low) are used for read/write operations with these three registers.
When C/D(low) is high, the control register is selected for writing control word or reading status word.
When C/D(low) is low, the data buffer is selected for read/write operation.
When the reset is high, it forces 8251A into the idle mode.
The clock input is necessary for 8251A for communication with CPU and this clock does not control either the serial transmission or the reception rate.ThesisScientist.com
FNIRSI SG-004A Multi-function Signal Generator User Manual
FNIRSI SG-004A Multi-function Signal Generator 0-24V 4-20mA Analog Voltage Current Thermocouple Resistance Process Calibrator
Very Large Integrated Circuit (VLSI) is a domain where the nano work has been done over millions of transistors and diode and even on other electronics components. Every electronics devices available in market definitely consist of tiny electronics component. Funnel shifter is one of the most important element in any macro electronics devices which is responsible to do logical shifting of binary bits. So, how to make it using electric software and do testing whether the function which has been applied to make this element is right or not that is described here.
For more details : https://github.com/shahsamkit73/funnel-shifter
In this third class we will continue our exploration of positional number systems, switching gears to examine binary and hexadecimal systems. We will also examine a problem-solving approach that is used by programmers - the IPO method.
Numeral Systems: Positional and Non-Positional
Conversions between Positional Numeral Systems: Binary, Decimal and Hexadecimal
Representation of Numbers in Computer Memory
Exercises: Conversion between Different Numeral Systems