I constructed a ship environment based on my original design concept. Some areas like the coms room and crew quarters had to be simplified due to time constraints. A hallway connecting the garage and crew quarters was omitted. The hallway to the cockpit was meant to curve but that detail was left out to save time. The coms room and medbay contain chairs, monitors and tables like the cockpit to appear functional. The medbay is the right size to avoid being too small or empty. The crew quarters has beds but appears dark due to the direction of the light source and window placement despite a glass roof added for light. The garage was meant to be cramped with boxes initially but is now empty

1. Production Log – Construction
I constructedthe shipenvironmentbasedonmylayoutconceptthatI drew at the start of the unit. It
is very similar to my design apart from the shape of the coms room and crew quarters, which I had
to simplify to make up for lost time. There is also a missing hallway going from the garage to the
crew quarters, I decided not to include it because it wouldn’t fit in the space it had. The hallway
leading to the cockpit was meant to curve; I had to save time so I left that part out.

2. Thisis the viewfrominside the cockpit,whichnow containstwochairsandmonitors to make it look
more functional. This set up is similar to other rooms (e.g. coms room, medbay).
The coms room,as I saidabove,issimilarto the cockpit, except this is a smaller room and the table
is against a flat wall.

3. The imagesabove are of the medbay, the medbay contains a table, monitor, chair and bed, I made
the room the right size so that it wouldn’t be too small and cramped or too big and empty.
The central room is almost completely empty; I did this because if people were living in this
environmentthenhavingstuff inthe way when someone needs to get from one room to the other
would be annoying.

4. The crew quartersisdark in the side of the room thathas the bedsplacedinitdespite the glass roof
I made to allowmore lightinandthe window.Thisisbecause of the directionof the lightsource,but
that is all the room contains and it’s still visible.
The garage is emptyinthe middle of the room;I usedthe table I made in modeller to line the walls
to make it more interesting as I wanted it to be quite cramped at first, with a bunch of boxes and
otherobjectsfillingthe room.In the second picture you can see that the corner of the room, which
isdark due to the small space,is filled with piles of crates to show what I had in mind for this room
at first.

5. I left the engine room empty as I don’t think it needs anything, I was also worried that anything I
were to put in the room could look out of place.