1. Carrascal National High School
Carrascal Surigao del Sur
First Periodical Exam
Automotive 8
NAME:_______________________________ SUBJECT:______________
GRADE AND SECTION:___________________ SCORE:_______________
Direction: Read each question carefully and write the letter of the correct answer.
1. A successful task can be achieved through _____ planning and preparation.
A. careful and proper B. constant C. courageous D. seldom
2. Good preparation will boost your _____.
A. confidence B. intelligence C. skill D. weakness
3. One of the factors to consider when preparing for the task in order to avoid accident is
_________.
A. materials B. place C. safety D. waste disposal
4. When the task calls for the removal of parts, use _____.
A. cleaning tools B. loosening and tightening tools C. marking tools D. measuring
tools 5. Measuring is a task that needs _____.
A. cleaning tools B. cutting tools C. measuring tools D. tightening and
loosening tools
6. When you want to make things done with less effort and efficiency, use _______.
A. bench work B. lights C. space D. tools
7. Possessing basic knowledge will help you __________ tools for the tasks.
A. guess B. identify and select C. presume D. replace
8. Choosing the right tool is easy but requires a lot of _____________.
A. assumption B. deduction C. practice D. presumption
9. Using incorrect tools for the job will result in _____________.
A. efficiency B. injury C. good performance D. good values
10. Basic level of competency involves _____________.
A. checking and inspection B. disassembling C. overhauling D. major job
11. Tools must be used to their maximum_________.
A. effectiveness B. elasticity C. enablement D. endurance 12. A tool that
has __________ been defective creates headache and irritation.
A. frequently B. once a month C. once a year D.
seldom 13. Faulty tools must be recorded, ________ and reported at
once.
A. condemned B. marked C. thrown D. used
14. Tools must be set apart according to its ____________.
A. design B. serviceability C. shape D. style
15. A faulty tool once used ____________ work efficiency.
A. drives B. increases C. precedes D. reduces
16. Measurement can be applied by means of:
A. driving tool B. measuring tool C. marking tool D. punching tool
17. Precision measuring instruments cannot be squarely compared to the one used for ____
jobs.
A. electrical B. mechanical C. hit and miss D. pneumatic
18. Parts that need to be serviced must have acorresponding data of specifications ________.
A. manual B. specifications C. sequence D. symbol
19. The bolt’s mechanical strength or stretching point will easily give up and consequently
break if it exceeds too much _________.
A. data B. tensile strength C. resistance D. torque
2. 20. A dial gauge is used to measure _________.
A. backlash B. gap C. end space D. space
21. Mechanical measuring tool like torque wrench have limited_________.
A. cost B. tolerance C. price D. weight
22. To check the ignition timing of ignition system, use _________.
A. dim light B. headlight C. flashlight D. strobe light
23. Calculation can be solved by using mathematical _________.
A. formula B. system C. strategy D. type
24. The distance travelled by a vehicle is expressed in terms of miles (mi) or _____.
A. kilometer (km) B. meter (m) C. liter (L) D. yard (yd)
25. In getting the bearing diameter or shim thickness, using _______ tool is much better.
A. divider caliper B. steel rule C. inside caliper D. vernier caliper
26. Standardizing measurement was established to avoid ___________ and deceit.
A. courage B. honesty C. dishonesty D. tax
27. The era of measurement continued to develop into a more suitable and _________ way.
A. logic B. magic C. physical D. scientific
28. 12 inches is equivalent to ____ foot.
A. 1 B. 24 C. 12 D. 36
29. When the vehicle runs, it is measured by the distance travelled in terms of mile (mi) or
_______. A. kilometer (km) B. meter (m) C. liter (L) D. Yard (yd)
30. The boiling of water in degrees Fahrenheit is ___________.
A. 2000F B. 2140F C. 2120F D. 2160F
31. Which sign represents “KEEP LEFT”?
32.
33.
34.
35.
36. Which of the following signs is indicating a high risk circumstances is present :
37.
3. 38.
39.
40.
41.
42.
43.
44.
45.
46.
47.
48.
49.
50. How can you maintain measuring instruments?
A. Let it scatter anywhere after using. C. Allow your younger siblings to play with it.
b. Put it inside the toolbox after using. D. Left it outside the rain to be rusty.
“Stop cheating cause God is watching. God bless you!”