Dr Hamide Norouzi ,Prosthodontist,TUMS

1. ALL-CERAMIC
SYSTEMS
Dr Hamide Norouzi ,Prosthodontist

7. All_ceramic
restorations
Bonded all_ceramic restorations
 Feldspatic porcelain restorations
 Highly filled glass ceramic restorations
Cemented all_ceramic restorations
 High strength core restorations

8. Feldspatic
porcelain
restorations
 Sintering & CAD/CAM(vita block mark II)
 Veneered on MCR restorations and
high_strength ceramic core restorations
 Most esthetic and requires the least amount of
tooth reduction
 Minimum thickness 0.5 mm
Indication:
 patient with high esthetic expectations
 Anterior partial veneers

9. Highly filled
glass ceramic
restorations
Leucite Based ( IPS Empress, IPS Empress CAD)
 Heat-Pressed & CAD/CAM
Indications:
 Anterior full coverage and veneer restorations
 Inlay & onlay
 Pre molars Full coverage restoration
Lithium Silicate Based ( E-max , E-max CAD )
 Heat-Pressed & CAD/CAM
Indications:
 all single unit restorations
 Anterior 3 units restorations

13. High strength
core
restorations
Alumina reinforced substructures
 Inceram (slip cast )
 Inceram spinell( magnesium oxide core)
 Procera (CAD/CAM)
Indications:
 all single unit restorations
 Anterior 3 units restorations
Zirconia reinforced substructures
 CAD/CAM
Indications:
 all single unit restorations
 Anterior FPD restorations

24. Machined
Ceramics
 Cerec System

26. Machined and
Sintered
Ceramics
 Zirconia Ceramics
 Zirconia-Reinforced Lithium Silicate Ceramics

28. Metal-Reinforced
Systems
 Captek System

29. SELECTION
OFALL-
CERAMIC
SYSTEMS
 Fracture Resistance
 Esthetics
 Abrasiveness

30. Thank you