1. Mechanical Commissioning Technician
From:
VIPULKUMAR NARSINHBHAI NAVIK
At : Madhav Nagar, Vill : Bhimpore,
Post : Dumas, Tal : Choryasi,
Dist : Surat – 395007
Gujarat State, INDIA
Work No. +97474494301
Mobile no: + 91 – 9998307981
E-mail: vipulkumar_navik@yahoo.com
Dear Sir,
Enclosed please find attached my detailed Curriculum Vitae for your kind Attention and
Consideration for the Subject Position In your Esteemed Organization.
I have 11 Years experience (both India and Overseas) as a MECHANICAL
COMMISSIONING TECHNICIAN in mechanical field, During My overseas employment I
have been worked for various States owned International companies major Oil & Gas,
petrochemical industries. I have worked for different process Refineries, LNG Gas Plants,
Fertilizers, Petrochemicals Plants, & HRSG Power plants etc.
At present I am working in Ras Gas Offshore through Qatar Kentz Company, at Doha
Qatar as a Mechanical Commissioning Technician.
If you give me an opportunity to work under your kind control, I will discharge my duties
to the entire satisfaction of my superiors.
Looking forward for a favorable response from you.
If you need further details please feel free to contact to my above address.
I look forward to hear from you in anticipation.
Thanking you,
Yours faithfully
VIPUL N. NAVIK
ACADEMIC QUALIFICATION:
 Vinay Vidhyalay High School, Surat (S.S.C).
TECHNICAL QUALFICATION:
 DIPLOMA IN MECHANICAL ENGINEERING
Page 1 of 5

2. Experience Summary
≥ Carried out overhauling, repairing preventive, breakdown, and shutdown maintenance, trouble
shooting, condition monitoring, alignments, and hydro testing, of rotating & static equipments, using
measuring tools.
≥ Control the manpower and completion the job within schedule, receiving permit from operation
and accept job side supervisor completed job with safely and timely, Repairing, and installing
equipments make report daily activities After completing the job hand over to process and test runs
the equipments.
≥ Erection Commissioning and maintenance activities Coordinate and participate in the preventive,
corrective and troubleshooting maintenance activities of the plant equipment at the assigned location
and conducted Toolbox meetings with subordinates for discussing safety and methods of completing
job tasks.
≥ Overhauling, preventive, breakdown like pumps, compressors, fin fans blowers, heat exchangers,
column, and using all type of measuring tools like micrometer, Verneer caliper depth gauge etc.
≥ Erection, alignments, installing, of rotating and static equipments, like boiler feed pumps, FD
Fans, air preheated, and heat exchangers, vessels, and columns.
≥commissioning experience of Reliance Petrochemical Company in VCM, PVC, Polyethylene, Gas
Cracker plant, and Jamnagar Refinery Aromatic tran1, 2, and 3 and CCR HNNU,
Precommissioning, Commissioning & Start-up :-
Planning, Execution, Control and Supervision of all activities like Pneumatic testing, Hydro testing,
Water-flushing, Pressurizing, Depressurizing etc. of pipe lines & equipment’s.
Attending/generating punch-list points as a part of mechanical completion activities. Confirm there are no
punch list items.
Mech. completion verification ( with P.&I.D., Isometric & G.A. drg., test-pack preparation and equipment
inspection)
Pre-commissioning,(Punch-list clearance, Air-blowing, water-Flushing, Leak testing & box-up)
Commissioning,( Start up, performance test and preparing documentation).
OFFSHORE TRAINING
TBOSIET-(Tropical Basic Offshore Safety Induction and Emergency Training)
Training and courses:
≥ I have attended and qualified for HSE, HSE-MS Tools & Skills, H2S, Permit -to-Work (PTW
Holder) Safety Leader ship, (SLS) Gas taster, Course
≥ I have trained for the H2S/SCBA Fire fight, Course
≥ HSE Course Permit to Work course basic and intermediate permit performing party
Authorization
≥ Attended basic and advanced Fire Fighting Course, health and Safety training Course
≥ Attended confined space and fire fighting, HSE course, etc.
Page 2 of 5

3. WORK OF EXPERIENCE IN INDIA AND ABROA
No Name of Company Designation
Period
From To
1.
QATAR KENTZ THROUGH RASGAS
OFFSHORE COMPANY, AT DOHA QATAR
Mechanical
Commissioning
Technician
15/10/2013 31/01/2015
2
ADMA OPCO THROUGH GISCO COMPANY,
AT DAS ISLAND, ABU DHABI
Mechanical
Commissioning
Technician
13/12/2011 19/08/12
3.
SBM OFFSHORE CONTRACTORS INC. THOUGH
SPIE OIL & SERVICES MIDDLE EAST L.L.C.,
AT ABU DHABI
Mechanical
Commissioning
Technician
10/03/2011 12/04/2011
4.
SBM OFFSHORE CONTRACTORS INC. THOUGH
SPIE OIL & SERVICES MIDDLE EAST L.L.C.,
AT ABU DHABI
Mechanical
Commissioning
Technician
04/12/2010 01/03/2011
5.
SBM OFFSHORE CONTRACTORS INC. THOUGH
SPIE OIL & SERVICES MIDDLE EAST L.L.C.,
AT ABU DHABI
Mechanical
Commissioning
Technician
13/06/2010 27/10/2010
6.
KETAN ENGINEEING SERVICE PVT. LTD.,
THOUGH RELIANCE INDUSTRIES LTD., AT
HAZIRA, SURAT
Mechanical
Technician
12/12/2009 23/10/2010
7.
S.S. CONSTRUCTION THOUGH OIL & NATURAL
GAS CORPORATION LTD., AT HAZIRA, SURAT
Mechanical
Maintenance
Technician
04/02/2007 05/11/2009
8.
VISHAL ENTERPRISE THOUGH RELIANCE
INDUSTRIES LTD., AT HAZIRA, SURAT
Mechanical
Maintenance
Technician
14/03/2005 02/12/2007
9.
SAGAR CONSTRUCTION THOUGH OIL &
NATURAL GAS CORPORATION LTD., AT
HAZIRA, SURAT
Mill Wright
Fitter
10/02/2002 08/01/2005
EQUIPMENT HANDLED AND JOB EXPOSURE:
≥During my job I had worked on various static & rotating equipments details of which are given below:
PUMPS:
≥ worked in single and multi stage centrifugal and reciprocating pumps with following activities.
≥ Erection and leveling of base plate and alignment of driver shaft with highest degree of accuracy.
≥overhauling of various makes pumps i.e.Sulzer, Worthington, Sun dyne, Khimline, Kirloskar, Ebara
Bwip, Gould’s, Etc.
≥all types of Mechanical seal overhaul & replacement (i.e. single, double & cartridge seals).
Page 3 of 5

4. ≥ Preventive maintenance, condition monitoring, Trouble shooting, break down maintenance and shut
Down maintenance of all type of pumps.
COMPRESSORS:
≥Worked on multistage centrifugal, reciprocating and screw compressors (various make i.e. Borsig,
Ingersoll-Rand, Nuovo Pig none, Hoyden UK, Elliot, Atlas Cop co, Jay Machinery, and Hitachi Four Stage
Refrigeration Compressors etc.
≥Overhauling, carried out preventive maintenance, break down, and shut down maintenance, replacements of
rotor, bearings, labyrinth, centering of the rotor and seal oil & lube oil system of Centrifugal Compressors.
≥ Checking bearing clearances, web deflection and piston run out, stand out, pumping Clearance, Cross head
clearances, Testing of Suction and Discharge valves, replace of piston ring and rider rings of
Reciprocating Compressors etc.
≥Alignment of compressors with various methods like Double dial method, Triple dial method and reverse
dial indicator method, and Lesser Alignments with Apt alignment, depending upon the vendor’s
requirement.
Steam Turbine:
≥ Worked on erection, commissioning, overhauling, preventive maintenance, over speed trip test, condensing
and non-condensing type such as throbbing, innersole rand, Nuovo pig none, dressarrand Mitsubishi and
Escoda etc.
≥Checking bearing redial and axial clearance, labyrinth clearance, carbon seal clearance, nozzle clearance,
etc.
≥Replaced bearing, labyrinth, carbon seal, throttle valve etc.
Gas Turbine:
≥Overhauling & running Maintenance Shut down Maintenance, preventing maintenance, and replaced de fog
and intake air filters,
≥Cleaning of Fuel burners in Combustion chamber, inspection of Bleed valves, Crank washing of Rotors,
changing of Gas generator & aligning with Power generator, Inspection, Checking clearance and changing
of Bearings and labyrinths seals Diagnosis fault finding in lube oil circuits.
Other mechanical related Equipment.
≥ Balancing different type of rotor on Dynamic Balancing machine.
≥ I know the all type of alignments like ream & Face method, Reverse indicator method, and apt align,
(Lesser Alignments) .
≥ I used all type of measuring tools like micrometer, (inside, outside, depth gauge, including cylinders micro
miter) veneers calipers, etc.
≥Gear Box, F.D. Fan, I.D.Fan, Agitator, Blower, Fin fan, deferent type of Actuators, Hydraulic cylinder,
Valves telescopic travel screen, Sea water gates, Loading arm etc.
≥ Well conversant with columns internals heat exchangers and condensers in which bundle remove and dome
cover fixing and hydro testing of exchangers.
≥ All types of valves like Gate, Globe, and Check valve, Butterfly, Ball and Plug valves.
≥ Various types of vessels, columns, column internals, and cooling tower fans, gear boxes, fin fans, motor
operated valves, pressure safety valves and steam traps.
≥ Maintenance of different types heat exchangers like shell and tube, fixed head, U- tube and kettle type and
fin fan coolers.
Page 4 of 5

5. ≥ Well familiar with the usefulness of various tools and tackles, lifting and rigging arrangements, safe
working standards like Permit to work, Hot work permits, vessel entry permits and vehicle entry permits,
scaffolding and other safety standards.
≥ I have trained for the H2S/SCBA Course, HSE Course Permit to Work course and permit performing party
Authorization, RAS GAS Induction course and I have heard the Ras Gas Message about L.N.G and H2S
Gas.
≥ In line with latest CMMS system I posses’ adequate knowledge of (ADNOC)CMMS (Computer
Maintenance and material managements system) MAXIMO.S experience with all maintenance and material
related modules of Maximo.s.
≥ Familiar with Microsoft windows operating system and Microsoft office prouder.
COMBINED CYCLE (CAPATIVE) POWER PLANT
For Catering the power requirement og HBI modules, captive power plant (C.P.P.) with 20.2
MW Frame – 9, General Electricl make Gas Turbine until was instlled and commissioned. Later
on, for best utilization of the heat energy content of hot exhaust gases from Gas Turbine, the
plant was converted to a combined cycle power generation unit by installation of Heat recovery
steam generator (Boiler) and 11.1 MW SKODA make steam turbine unit.
C.P.P is connected with the main 220 KV supply bus (GRID) through a 40 MVA transformer
located in 220 KV switchyard. Normally, CPP operates in synchronized condition with GRID to
have an alternate power source of 220 KV always available.
C.P.P. meets the complete power requirement of two modules of HBI units. With a 380 KVA
D.G. set, CPP has black start facility and suppliers emergency power at 6.6 KV through a 12.5
MVA transformer for STEEL-II as well as EpcL for their 6.6 KV Gas turbine start up motor.
C.P.P. has got the facility to start the unit independently without external power support, if the
fuel (natural gas / HSD and naphtha) is available.
FUNCTIONAL DESCRIPTION
The 32 MW Captive power Plant is basically divided in three sub parts.
 Gas Turbine Generator – 20.2 MW
 50 TPH Heat Recovery Steam Generator (H.R.S.G.0
 Steam Turbine Generator – 11 MW
GAS TURBINE GENERATOR
Gas Turbine is having dual firing facility and can run with liquid fuel (naphtha/HSD) of gaseous
fuel or also with mix fuel of both.
Major components of Gas Turbine are :
 Diesel Engine
 Hydraulic Torque Converter
 Accessory Gear Box
 Compressor
 Combustion Chamber
 Gas Turbine
Page 5 of 5

6.  Load Gear Box
 Synchronous Generator
PERSONAL PROFILE:
Name : Vipulkumar Narsinhbhai Navik
Father’s Name : Narsinhbhai Limbabhai Navik
Permanent Address : At : Madhav Nagar, Vill : Bhimpore,
Post : Dumas, Tal : Choryasi,
Dist : Surat – 395007
Gujarat State, INDIA
Present Address : Same as above
Date of Birth : 03/03/1979
Language Known : Gujarati, Hindi, English
Marital Status : Married
Passport Details : Passport no: H – 7950308
Place of Issue: Surat
Date of Issue: 19/02/2010
Date of Expiry: 18/02/2020
Email id : vipulkumar_navik@yahoo.com
I wish to submit this application of mine for your kind perusal for the position of
MECHANAICL TECHNICIAN of maintenance, experience in Oil & Gas , Petroleum,
Fertilizer, Petrochemical and Refinery facilities, LNG Gas plants and Power plants seeking
challenging carrier. I would be happy if I am given a chance to meet you for further discussion.
Place; Signature of the candidate
Date: (Vipul N. Navik)
Page 6 of 5

7.  Load Gear Box
 Synchronous Generator
PERSONAL PROFILE:
Name : Vipulkumar Narsinhbhai Navik
Father’s Name : Narsinhbhai Limbabhai Navik
Permanent Address : At : Madhav Nagar, Vill : Bhimpore,
Post : Dumas, Tal : Choryasi,
Dist : Surat – 395007
Gujarat State, INDIA
Present Address : Same as above
Date of Birth : 03/03/1979
Language Known : Gujarati, Hindi, English
Marital Status : Married
Passport Details : Passport no: H – 7950308
Place of Issue: Surat
Date of Issue: 19/02/2010
Date of Expiry: 18/02/2020
Email id : vipulkumar_navik@yahoo.com
I wish to submit this application of mine for your kind perusal for the position of
MECHANAICL TECHNICIAN of maintenance, experience in Oil & Gas , Petroleum,
Fertilizer, Petrochemical and Refinery facilities, LNG Gas plants and Power plants seeking
challenging carrier. I would be happy if I am given a chance to meet you for further discussion.
Place; Signature of the candidate
Date: (Vipul N. Navik)
Page 6 of 5