1. MECHANICAL TECHNICIAN
Shaikh Mohammed Soaeb Abdulvahab
ADDRESS
C-1660, Malbari Darwaja,
Near Jumma Masjid,
Bharuch-392001 Guajrat-India.
Mobile No:00974-33150836
0091-9904438524
PERSONAL DATA
Educational Qualification : High Secondary School Certificate Exam (H.S.C.) Passed
in March
Technical Qualification : Passed ITI (Industrial training Institute as
Attendant Operator cum Mechanical) from Gujarat
Council of Vocational Training, Gandhinagar,
Gujarat-India.
Safety Training : IIF ( Incident and injury free ) PTW (Permit to work system)
Firefighting. H2S/B.A Confined space Entry. B-safe.
Date of Birth : 17-09-1987
Marital Status : Married
Total Experience : 12 Years (5Years of INDIA + 7 Years of Abroad)

2. PASSPORT DETAILS
Passport No. : G 9372511
Date of Issue : 01/09/2008
Date of Expiry : 31/10/2018
MY STRENGHT:-
• GOOD COMMUNICATION
• POSITIVE ATTITUDE IN WORK TIME
• ADAPTABILTY IN NATURE
• HARD WORKING
• ABILITY TO ADJUST IN ANY ENVIRONMENT
• ABILITY TO PERFORM & DELIVER UNDER PRESSURE DAD LINE
• HIGHLY MOTIVATED TO WORK TO WORK AS A TEAM
OBJECTIVE:-
Seeking Position In a reputed organization to provide an space scope of mutual
value addition and growth to work efficiently with a position responsibility and
challenge.
NAME OF THE
EMPLOYER
NAME OF WORK
SITE
POSITION PERIOD
Arabian Construction
Engineering Company
Qatar Gas, (LAFFAN
REFINERY)
REFINERY
Mechanical
Technician
April 2010 to
till date
Arabian Construction
Engineering Company
RAS GAS (LNG)
QATAR.
Mechanical
Technician
Dec.2008
to
March 2010
KANORIA CHEMICALS,
Ankelshwer-India
Ankelshwer-India.
Mechanical
Technician
June 2003
to
April 2007
RESPONSIBILITIES IN ABROAD
APPLY P T W as Per Work Order or Notification of operation side.

3. Issue P T W as Per Job Planning by Maintenance Planer
Permit Receiver & supervising of my Team Member.
I have successfully carried out various types of Heavy and Light jobs such as construction,
commissioning, operation and maintenance etc.
Maintenance (Preventive and Breakdown) and Overhauling of the Following equipments.
 Different types of Pumps like Centrifugal Pump, Vertical Pump, Screw Pump etc. [Single and
Multi Stage]
 Different types of Compressors like Centrifugal, Reciprocating and Rotary Compressor (Air
and Gas) etc. [Single and Multistage]
 Heat Exchanger: Fixed Head Type, Floating Head Type, U – Tube Type, Plate Heat
Exchanger.
 Heaters, Vessels, Reactors, Separators, Cooling Fans
 Commissioning and Testing of Mechanical Equipments
DAILY P T W TOOLBOX TALK
I have conducted Tool box talk and explained above point to my Team Member
(1) Communicated all Hazards and Control of the task
(2) Team Member are aware of what task all Member has to carry out At work site
(3) All Equipment Tools,PPE and People are suitable for the task
(4) Worksite has safe and adequate access exit available at all time
(5) Explained MAKE work site SAFE during emergency and showed Muster point
PUMPS AND COMPRESSORE
Operation and Maintenance Inspection, Troubleshooting and Overhauling the pumps and
compressore like Centrifugal Pumps and compressore, Piston type Pump and compressore,
Reciprocating Pump and compressore, Submergible Pumps etc.

4. Pump and compressore Inspection and Data Sheet Preparation like Impeller Wearing OD, Case
Wearing OD, No. of Stage, Bearing Shaft Dia., Shaft Run Out, Shaft Axle, Face Run Out, Spighot
Run Out etc.
ALIGNMENT
1. Reverse Alignment
2. Rim & Face Alignment
3. Laser Alignment
FIN FAN COOLING FAN
Maintenance, Inspection, Trouble Shooting and Overhauling; Monthly, Six Monthly & Yearly
Preventive Maintenance like Belt Tightening, Pulley Alignment, Blade Angle Setting etc.
MECHANICAL SEALS
Make like Seoul,Dura metric john crane etc.. worked all types mechanical seal s including
single
All parts Change with Vendor
VALVES
Service and Inspection of Different types of Valves like Gate Valve, Globe Valve, Butterfly Valve,
Non Return Valve etc.
COMPRESSOR
Maintenance for Reciprocating Screw, Centrifugal Single & Multistage Compressor

5. Have a good knowledge of checking, dismantling, service, cleaning, alignment setting of pulleys,
Bearing, valves, Piston Rings, Piston, Cylinders, Cylinder liners, Connecting Rods, Small End
Bush, Big End Bush, Crank Shaft, Oil pumps, Oil Strainer, Oil Filters, VLD Piston, Housing, “O”
Rings, Suction Strainer, Piston Liner Clearance Like TDC, BDC & Center. Deflection Check of
Crank Shaft.
Dismantling, Service, Alignment Setting, Checking of Clearance, Set New Clearance of Male &
Female Screw, Gear Setting, Main Bearing, Oil Separators, Safety Device, Oil Coolers & Oil
Filters Cleaning.
MECHANICAL COMMISSIONING CHECKLIST
Description of Check
1. Prepare Commissioning Test log Sheet for Pump Trial Run
Bearing Temperature, Oil Pressure, Oil Temperature, Casing Temperature, Suction Pressure,
Discharge Pressure, Discharge Temperature, Pump Speed, Power Consumed, Flow Rate,
Vibration Levels.
2. Check Hot Alignment and Record on Coupling Checklist
3. Confirm All electrical and Instrument Checklist are Complete.
4. Inspect All Associated Equipment, i.e. Cooler, Expansion Tank, Pumps etc.
5. Flush System and Ensure internal Cleanliness.
6. Check that all Pump have coupling Guards in place
7. Check that All non-essential Blinds are removed.
8. Check that Drain Valves are closed and Pluges/Caps are installed properly.
9. Check that All Relief Valves are installed and in Service.
10. Check that All Safety warning Signs are in the proper location and legible.

6. 11. Verify that all permanent and Temporary Strainers are being installed in correct position.
12. Ensure that Safety Valve are installed that they are set to the correct pressure as per P and
ID.
13. Check all pipe work and associated support are completed and relevant check list are
complete.
14. Confirm Flanges Can be Mated with Gasket in Place without undue bolt Stress prior to Final
Tightening.
15. Familiar with SCBA
16. Supervise the Preventive Maintenance jobs as per schedule.
17. Breakdown maintenance / overhauling of all equipment. Pumps with single and double
mechanical seal of Duramettalic make. Have good overhauling experience of pumps,
reciprocating compressor, fans for air fin cooler, ID/FD fans, high speed sun dyne pump,
multistage pumps, sump pumps. All pumps having API flushing plan
18. Shutdown job
With good knowledge about Permit to Work System and several kinds of permits like Cold
Work Permit, Hot Work Permit.
SAFETY DEVICES
H2S Safety, Fire Safety Using Crow Cam gas testes ( CH4, H2S ) Fire Extinguisher
(Form DCP & CO2), Work in Confined Space.
I Have Knowledge of the Safety regulation and Working In Hazardous area.
Think Safety Before Starting The Job Identify Hazards.

7. SUMMARY
In Brief I have a good knowledge and working experience of All Rotating and Static
equipment. In Addition of Having knowledge of Servicing Valve, Pumps, Heat Exchanger and
Attend the job as per My Senior commands.
Taking the Reading tow times of the compressor unit. I have planned My team members
worked schedule, employee goal setting, Build up team work for My team member available for
Specific Task follow my safety and work to permit procedures and timing managements.
Submit every day work report and planning work, sense of urgency for Breakdown jobs, monthly
Planning maintenance reports to My Senior. All the above details are true to Best of My
Knowledge.
Thanking you and awaiting for your favorable reply.
Date:
Place:
_______________________
(Soaeb Abdulvahab)