Submit Search
Upload
Combined Cycle Power Plant
•
Download as PPTX, PDF
•
2 likes
•
78 views
S
stormysummers
Follow
General overview of a twin gas turbine combined cycle power plant.
Read less
Read more
Technology
Report
Share
Report
Share
1 of 8
Download now
Recommended
P2b Powerstation 1
P2b Powerstation 1
M F Ebden
Now a days PV based energy systems are playing a vital role among all the renewable energy sourcesin our day to day life.Proper control should be required to meet the exact load conditions such that it should satisfy the non-linear nature of both the solar irradiance and load. In this paper, a battery is also incorporated along with the PV system to meet the necessary drop due to change in weather conditions. Here, a proper control is achieved by using DSTATCOM to compensate the reactive power. This paper proposes an advanced technique of PWM to generate the gating pulses and applied to a Cascaded H-Bridge multilevel inverter to improve the voltage quality. Here, the entire system is designed to meet the load of Mogulthur (W.G.Dt. Andhra Pradesh). Simulation results are presented through Matlab/Simulink by taking different cases into consideration.
PV Hybrid System with DSTATCOM for Residential Applications
PV Hybrid System with DSTATCOM for Residential Applications
IDES Editor
This slide shows the generation process and a detail of 726.6MW Combined Cycle Power Plant located in North-Eastern state Tripura of India (palatana project site) under ONGC-Tripura Power Company
OTPC-Palatana 726.6MW combined cycle power generation
OTPC-Palatana 726.6MW combined cycle power generation
Joydeep Paul
Economic dispatch
input output characteristics of thermal plant
input output characteristics of thermal plant
mathamramesh
Input-Output characteristics is the fundamental curve for a thermal plant.
Input output , heat rate characteristics and Incremental cost
Input output , heat rate characteristics and Incremental cost
Eklavya Sharma
The photovoltaic (PV) generation is increasingly popular nowadays, while typical loads require more high-power quality. Basically, one PV generator supplying to nonlinear loads is desired to be integrated with a function as an active power filter (APF). In this paper, a three-phase three-wire system, including a detailed PV generator, dc/dc boost converter to extract maximum radiation power using maximum power point tracking, and dc/ac voltage source converter to act as an APF, is presented. The instantaneous power theory is applied to design the PV-APF controller, which shows reliable performances. The MATLAB/Simpower Systems tool has proved that the combined system can simultaneously inject maximum power from a PV unit and compensate the harmonic current drawn by nonlinear loads.
Pv active power filter combination supplies power to nonlinear load and compe...
Pv active power filter combination supplies power to nonlinear load and compe...
Asoka Technologies
By Shri Manu Srivastava, IAS, Govt. of Madhya Pradesh | Accelerating Clean Energy 2017, Delhi
Transaction Structures for Procurement of Power from New Solar Parks in Madhy...
Transaction Structures for Procurement of Power from New Solar Parks in Madhy...
WRI India
In our nation the usage of electricity is increasing day-by-day. According to that conserdations, the generated power from the non-renewable sources will not satisfy the demands properly. so for these purpose, by using multiple renewable sources, it will be very useful to some type of dc applications. The power produced from the individual renewable sources will not be satisfy the demand at all times. So by integration of a multiple renewable sources such as wind and solar a huge amount of power will be produced. These power will be coordinated to the ac grid or directly to dc consumers. For integration of renewable sources an aggregated model has to be proposed. In according to these operation BESS (battery energy storage system)is equipped with the system for maintaining the power balance. For obtaining the power balance the adaptive droop control technique has to be proposed and droop curves are evaluated. The droop characteristics are selected on the basis of the deviation between the optimized and real-time SOC of the BESS. In these paper, the operational analysis can be performed when real time soc is higher than the optimised soc and droop curves are plotted.
An Higher Case Operation and Analysis of a Multiple Renewable Resources Conne...
An Higher Case Operation and Analysis of a Multiple Renewable Resources Conne...
IJERA Editor
Recommended
P2b Powerstation 1
P2b Powerstation 1
M F Ebden
Now a days PV based energy systems are playing a vital role among all the renewable energy sourcesin our day to day life.Proper control should be required to meet the exact load conditions such that it should satisfy the non-linear nature of both the solar irradiance and load. In this paper, a battery is also incorporated along with the PV system to meet the necessary drop due to change in weather conditions. Here, a proper control is achieved by using DSTATCOM to compensate the reactive power. This paper proposes an advanced technique of PWM to generate the gating pulses and applied to a Cascaded H-Bridge multilevel inverter to improve the voltage quality. Here, the entire system is designed to meet the load of Mogulthur (W.G.Dt. Andhra Pradesh). Simulation results are presented through Matlab/Simulink by taking different cases into consideration.
PV Hybrid System with DSTATCOM for Residential Applications
PV Hybrid System with DSTATCOM for Residential Applications
IDES Editor
This slide shows the generation process and a detail of 726.6MW Combined Cycle Power Plant located in North-Eastern state Tripura of India (palatana project site) under ONGC-Tripura Power Company
OTPC-Palatana 726.6MW combined cycle power generation
OTPC-Palatana 726.6MW combined cycle power generation
Joydeep Paul
Economic dispatch
input output characteristics of thermal plant
input output characteristics of thermal plant
mathamramesh
Input-Output characteristics is the fundamental curve for a thermal plant.
Input output , heat rate characteristics and Incremental cost
Input output , heat rate characteristics and Incremental cost
Eklavya Sharma
The photovoltaic (PV) generation is increasingly popular nowadays, while typical loads require more high-power quality. Basically, one PV generator supplying to nonlinear loads is desired to be integrated with a function as an active power filter (APF). In this paper, a three-phase three-wire system, including a detailed PV generator, dc/dc boost converter to extract maximum radiation power using maximum power point tracking, and dc/ac voltage source converter to act as an APF, is presented. The instantaneous power theory is applied to design the PV-APF controller, which shows reliable performances. The MATLAB/Simpower Systems tool has proved that the combined system can simultaneously inject maximum power from a PV unit and compensate the harmonic current drawn by nonlinear loads.
Pv active power filter combination supplies power to nonlinear load and compe...
Pv active power filter combination supplies power to nonlinear load and compe...
Asoka Technologies
By Shri Manu Srivastava, IAS, Govt. of Madhya Pradesh | Accelerating Clean Energy 2017, Delhi
Transaction Structures for Procurement of Power from New Solar Parks in Madhy...
Transaction Structures for Procurement of Power from New Solar Parks in Madhy...
WRI India
In our nation the usage of electricity is increasing day-by-day. According to that conserdations, the generated power from the non-renewable sources will not satisfy the demands properly. so for these purpose, by using multiple renewable sources, it will be very useful to some type of dc applications. The power produced from the individual renewable sources will not be satisfy the demand at all times. So by integration of a multiple renewable sources such as wind and solar a huge amount of power will be produced. These power will be coordinated to the ac grid or directly to dc consumers. For integration of renewable sources an aggregated model has to be proposed. In according to these operation BESS (battery energy storage system)is equipped with the system for maintaining the power balance. For obtaining the power balance the adaptive droop control technique has to be proposed and droop curves are evaluated. The droop characteristics are selected on the basis of the deviation between the optimized and real-time SOC of the BESS. In these paper, the operational analysis can be performed when real time soc is higher than the optimised soc and droop curves are plotted.
An Higher Case Operation and Analysis of a Multiple Renewable Resources Conne...
An Higher Case Operation and Analysis of a Multiple Renewable Resources Conne...
IJERA Editor
Load characteristics and Economic Aspects
Load characteristics and Economic Aspects
Abha Tripathi
Final FYP presentation new
Final FYP presentation new
Dareer Bin Khalid
Abstract: It is a framework considering industrial loads for improvement of power factor of industrial load system. Most of loads in industries are inductive in nature and thus having low power factor. Low power factor is highly undesirable and it increases current and also increases losses of active power. This paper discusses how to calculate the correct value of capacitor to improve power factor to overcome above mentioned problems. Because improving power factor will give efficient utilization of electrical power.
POWER FACTOR IMPROVEMENT OF INDUSTRIAL LOAD BY MATLAB SIMULATION
POWER FACTOR IMPROVEMENT OF INDUSTRIAL LOAD BY MATLAB SIMULATION
paperpublications3
This paper presents a new system configuration of the front-end rectifier stage for a hybrid wind/photovoltaic energy system. This configuration allows the two sources to supply the load separately or simultaneously depending on the availability of the energy sources. The inherent nature of this Cuk-SEPIC fused converter, additional input filters are not necessary to filter out high frequency harmonics. Harmonic content is detrimental for the generator lifespan, heating issues, and efficiency. The fused multiinput rectifier stage also allows Maximum Power Point Tracking (MPPT) to be used to extract maximum power from the wind and sun when it is available. An adaptive MPPT algorithm will be used for the wind system and a standard perturb and observe method will be used for the PV system. Operational analysis of the proposed system will be discussed in this paper. Simulation results are given to highlight the merits of the proposed circuit.
Simulation of MPPT Algorithm Based Hybrid Wind-Solar-Fuel Cell Energy System
Simulation of MPPT Algorithm Based Hybrid Wind-Solar-Fuel Cell Energy System
IJMER
This slide show gives information about various load duration curves. Also various factors used in Electricity Supply industry are explained.
Lecture 7 load duration curves
Lecture 7 load duration curves
Swapnil Gadgune
The Eighteenth Annual Newfoundland Electrical and Computer Engineering Confer...
The Eighteenth Annual Newfoundland Electrical and Computer Engineering Confer...
mominul511
The modern state of electrical system consists the conventional generating units along with the sources of renewable energy. The proposed article recommends a method for the solution of single and multi-objective optimal power flow, integrating wind and solar output energy with traditional coal-based generating stations. In the first part of the article, the two wind power plants and one solar PV power plants are incorporated with the thermal power plants. The optimal power flow problem of single and conflicting multi-objectives are taken with this scenario. The second part of the paper, solar power plant is replaced with another wind power plant with the conventional coal-based power plants. The techno-economic analysis are done with this state of electrical system. In proposed work, lognormal and weibull probability distribution functions are also utilized for predicting solar and wind outputs, respectively. A non-dominated multi-objective moth flame optimization technique is used for the optimization issue. The fuzzy decision-making approach is applied for extracting the best compromise solution. The results are validated though adapted IEEE-30 bus test system, which is incorporated with wind and solar generating plants.
Stochastic renewable energy resources integrated multi-objective optimal powe...
Stochastic renewable energy resources integrated multi-objective optimal powe...
TELKOMNIKA JOURNAL
Economic Load Dispatch aims at distributing the load demand between various generation stations in a system such that the total cost of generation is minimum. This is of vital importance since it not only reduces the operation cost of the generation utility but also helps in conserving fast dwindling energy resources. Modern day power systems are large interconnected systems with a large number of generator units each having its own cost curve. Ideally the cost function of a unit is a quadratic function of the power generated by the unit and the cost curve obtained is a smooth parabola. But in practice cost curves deviate from the idealised one due the several reasons such as valve point effect, multi fuel operation, existence of forbidden zones etc. and as such may not be continuous or analytic. Also for a large interconnected system it becomes essential to consider the effect of transmission losses. Conventional numerical method based approaches work well with systems without losses but for large systems with losses obtaining convergence becomes difficult as the number of iterations required as well as the computational time are very high. These methods fail entirely if non ideal cost curves are considered. Hence soft computing based methods become essential. Here Gravity Search Algorithm(GSA) has been used to for finding economic load scheduling in a multi generator system, given a certain load demand, and taking into consideration the effects of practical constraints on the idealised load curve. The algorithms for finding the economic scheduling has been written in Matlab and has provided satisfactory results based on the given tolerance values. Also the traditional and soft computing based approaches have been compared to demonstrate the advantages of one over the other.
Economic Load Dispatch for Multi-Generator Systems with Units Having Nonlinea...
Economic Load Dispatch for Multi-Generator Systems with Units Having Nonlinea...
IJAPEJOURNAL
This presentation explores the types of tariff,reserves,load and load duration curves for electrical power system !! soo enjoy !! :)
Tarrif and load curves
Tarrif and load curves
GPERI
LG CNS has implemented a management control system of Peak usage point in the massive production line where it uses a huge amount of power. LG Chemistry's factory in Iksan, Korea, is a case where the world's largest behind-the-meter LiB ESS is applied.
Reference - Peak Management for Large Factory
Reference - Peak Management for Large Factory
Gyuhak Choi
arc reactor tec.
Arc reactor
Arc reactor
Sagar Savale
This paper depicts a new configuration for modular hybrid power conversion systems, namely, multi-hybrid generation system (MHGS), and parallel connection at the output, such that the converter of each unit shares the load current equally. This is a significant step towards realizing a modular power conversion system architecture, where smaller units can be connected in any series/parallel grouping to realize any required unit specifications. The supercapacitor (SC) as a complementary source is used to compensate for the slow transient response of the fuel cell (FC) as a main power source. It assists the Fe to meet the grid power demand in order to achieve a better performance and dynamic behavior. Reliable control of the proposed MHGS with multiple units is also a challenging issue. In this paper, a simple control method to achieve active sharing of load current among MHGS modules is proposed. The simulation results verify the performance of the proposed structure and control scheme.
Power management strategy for a multi hybrid fuel cell energy storage power ...
Power management strategy for a multi hybrid fuel cell energy storage power ...
Asoka Technologies
IPS Connect Rottnest Island 2017 Tonga Power Renewable Ready
Murrray sheerin-renewable-energy-storage-best-practice-at-tpl-and-issues-faced
Murrray sheerin-renewable-energy-storage-best-practice-at-tpl-and-issues-faced
james hamilton
Tariff and Economic aspects in Power Generation Base loads and Peak Loads Variable Load on Power Station Importance of Load Curves Types of Tariff
Economics of Power Generation
Economics of Power Generation
Niraj Solanki
Physics class 9
Work and energy
Work and energy
SangeethManojKumar
This presentation dives into the practical applications of machine learning within Google's operations, providing a comprehensive overview of how to leverage AI technologies to solve real-world business challenges. Key Points Covered: - Introduction to Machine Learning at Google: Discussion on the role of ML and its evolution in enhancing Google's operational efficiency. - Experience Sharing: Insights into the team's long-term engagement with machine learning projects and the impacts on Google’s operational strategies. - Practical Applications: Real-world examples of ML applications within Google’s daily operations, providing a blueprint to adapt similar strategies. - Challenges and Solutions: Discussion on the challenges faced during the implementation of ML projects and the strategic solutions employed to overcome them. - Future of ML at Google: Insights into future trends in machine learning at Google and how they plan to continue integrating AI into their ecosystem.
Strategic AI Integration in Engineering Teams
Strategic AI Integration in Engineering Teams
UXDXConf
Partner Tech Talk with Tinybird
Speed Wins: From Kafka to APIs in Minutes
Speed Wins: From Kafka to APIs in Minutes
confluent
How WebAssembly can be used to optimize and accelerate Large Language Models Inference in the Cloud.
WebAssembly is Key to Better LLM Performance
WebAssembly is Key to Better LLM Performance
Samy Fodil
TEST BANK For, Information Technology Project Management 9th Edition Kathy Schwalbe.pdf TEST BANK For, Information Technology Project Management 9th Edition Kathy Schwalbe.pdf TEST BANK For, Information Technology Project Management 9th Edition Kathy Schwalbe.pdf
TEST BANK For, Information Technology Project Management 9th Edition Kathy Sc...
TEST BANK For, Information Technology Project Management 9th Edition Kathy Sc...
marcuskenyatta275
Brief Introduction to Generative AI and LLM in particular. Overview of the market, and usages of LLMs. What's it like to train and build a model. Retrieval Augmented Generation 101, explained for non savvies, and a perspective of what are the moving parts making it complex
AI presentation and introduction - Retrieval Augmented Generation RAG 101
AI presentation and introduction - Retrieval Augmented Generation RAG 101
vincent683379
FIDO Taipei Workshop: Securing the Edge with FDO
Secure Zero Touch enabled Edge compute with Dell NativeEdge via FDO _ Brad at...
Secure Zero Touch enabled Edge compute with Dell NativeEdge via FDO _ Brad at...
FIDO Alliance
Automation is transforming industries by streamlining operations and reducing costs. However, the success of automated systems hinges not only on their functionality but also on the user experience (UX). This talk, "The UX of Automated Processes," delves into the intricate relationship between automation and UX, providing a comprehensive guide to designing intuitive and effective automated systems. Key Topics Covered: 1. Introduction to Automated UX: * Understanding the importance of UX in automated systems * Real-world example: Robotic beer dispensers at a music festival 2. Step-by-Step Process for Enhancing Automated UX: * Step 0: Identifying main workflows and happy paths * Step 1: Conducting contextual inquiries to understand current user practices and edge cases * Step 2: Prioritizing issues and solutions through collaborative ideation sessions * Step 3: Prototyping and usability testing for both software and hardware 3. Prototyping and Testing: * Methods for simulating automated processes * Importance of user feedback in refining automated systems 4. Designing for Support Users: * Crafting the experience for support personnel who manage edge cases * Ensuring effective communication and issue prioritization for support users
The UX of Automation by AJ King, Senior UX Researcher, Ocado
The UX of Automation by AJ King, Senior UX Researcher, Ocado
UXDXConf
More Related Content
What's hot
Load characteristics and Economic Aspects
Load characteristics and Economic Aspects
Abha Tripathi
Final FYP presentation new
Final FYP presentation new
Dareer Bin Khalid
Abstract: It is a framework considering industrial loads for improvement of power factor of industrial load system. Most of loads in industries are inductive in nature and thus having low power factor. Low power factor is highly undesirable and it increases current and also increases losses of active power. This paper discusses how to calculate the correct value of capacitor to improve power factor to overcome above mentioned problems. Because improving power factor will give efficient utilization of electrical power.
POWER FACTOR IMPROVEMENT OF INDUSTRIAL LOAD BY MATLAB SIMULATION
POWER FACTOR IMPROVEMENT OF INDUSTRIAL LOAD BY MATLAB SIMULATION
paperpublications3
This paper presents a new system configuration of the front-end rectifier stage for a hybrid wind/photovoltaic energy system. This configuration allows the two sources to supply the load separately or simultaneously depending on the availability of the energy sources. The inherent nature of this Cuk-SEPIC fused converter, additional input filters are not necessary to filter out high frequency harmonics. Harmonic content is detrimental for the generator lifespan, heating issues, and efficiency. The fused multiinput rectifier stage also allows Maximum Power Point Tracking (MPPT) to be used to extract maximum power from the wind and sun when it is available. An adaptive MPPT algorithm will be used for the wind system and a standard perturb and observe method will be used for the PV system. Operational analysis of the proposed system will be discussed in this paper. Simulation results are given to highlight the merits of the proposed circuit.
Simulation of MPPT Algorithm Based Hybrid Wind-Solar-Fuel Cell Energy System
Simulation of MPPT Algorithm Based Hybrid Wind-Solar-Fuel Cell Energy System
IJMER
This slide show gives information about various load duration curves. Also various factors used in Electricity Supply industry are explained.
Lecture 7 load duration curves
Lecture 7 load duration curves
Swapnil Gadgune
The Eighteenth Annual Newfoundland Electrical and Computer Engineering Confer...
The Eighteenth Annual Newfoundland Electrical and Computer Engineering Confer...
mominul511
The modern state of electrical system consists the conventional generating units along with the sources of renewable energy. The proposed article recommends a method for the solution of single and multi-objective optimal power flow, integrating wind and solar output energy with traditional coal-based generating stations. In the first part of the article, the two wind power plants and one solar PV power plants are incorporated with the thermal power plants. The optimal power flow problem of single and conflicting multi-objectives are taken with this scenario. The second part of the paper, solar power plant is replaced with another wind power plant with the conventional coal-based power plants. The techno-economic analysis are done with this state of electrical system. In proposed work, lognormal and weibull probability distribution functions are also utilized for predicting solar and wind outputs, respectively. A non-dominated multi-objective moth flame optimization technique is used for the optimization issue. The fuzzy decision-making approach is applied for extracting the best compromise solution. The results are validated though adapted IEEE-30 bus test system, which is incorporated with wind and solar generating plants.
Stochastic renewable energy resources integrated multi-objective optimal powe...
Stochastic renewable energy resources integrated multi-objective optimal powe...
TELKOMNIKA JOURNAL
Economic Load Dispatch aims at distributing the load demand between various generation stations in a system such that the total cost of generation is minimum. This is of vital importance since it not only reduces the operation cost of the generation utility but also helps in conserving fast dwindling energy resources. Modern day power systems are large interconnected systems with a large number of generator units each having its own cost curve. Ideally the cost function of a unit is a quadratic function of the power generated by the unit and the cost curve obtained is a smooth parabola. But in practice cost curves deviate from the idealised one due the several reasons such as valve point effect, multi fuel operation, existence of forbidden zones etc. and as such may not be continuous or analytic. Also for a large interconnected system it becomes essential to consider the effect of transmission losses. Conventional numerical method based approaches work well with systems without losses but for large systems with losses obtaining convergence becomes difficult as the number of iterations required as well as the computational time are very high. These methods fail entirely if non ideal cost curves are considered. Hence soft computing based methods become essential. Here Gravity Search Algorithm(GSA) has been used to for finding economic load scheduling in a multi generator system, given a certain load demand, and taking into consideration the effects of practical constraints on the idealised load curve. The algorithms for finding the economic scheduling has been written in Matlab and has provided satisfactory results based on the given tolerance values. Also the traditional and soft computing based approaches have been compared to demonstrate the advantages of one over the other.
Economic Load Dispatch for Multi-Generator Systems with Units Having Nonlinea...
Economic Load Dispatch for Multi-Generator Systems with Units Having Nonlinea...
IJAPEJOURNAL
This presentation explores the types of tariff,reserves,load and load duration curves for electrical power system !! soo enjoy !! :)
Tarrif and load curves
Tarrif and load curves
GPERI
LG CNS has implemented a management control system of Peak usage point in the massive production line where it uses a huge amount of power. LG Chemistry's factory in Iksan, Korea, is a case where the world's largest behind-the-meter LiB ESS is applied.
Reference - Peak Management for Large Factory
Reference - Peak Management for Large Factory
Gyuhak Choi
arc reactor tec.
Arc reactor
Arc reactor
Sagar Savale
This paper depicts a new configuration for modular hybrid power conversion systems, namely, multi-hybrid generation system (MHGS), and parallel connection at the output, such that the converter of each unit shares the load current equally. This is a significant step towards realizing a modular power conversion system architecture, where smaller units can be connected in any series/parallel grouping to realize any required unit specifications. The supercapacitor (SC) as a complementary source is used to compensate for the slow transient response of the fuel cell (FC) as a main power source. It assists the Fe to meet the grid power demand in order to achieve a better performance and dynamic behavior. Reliable control of the proposed MHGS with multiple units is also a challenging issue. In this paper, a simple control method to achieve active sharing of load current among MHGS modules is proposed. The simulation results verify the performance of the proposed structure and control scheme.
Power management strategy for a multi hybrid fuel cell energy storage power ...
Power management strategy for a multi hybrid fuel cell energy storage power ...
Asoka Technologies
IPS Connect Rottnest Island 2017 Tonga Power Renewable Ready
Murrray sheerin-renewable-energy-storage-best-practice-at-tpl-and-issues-faced
Murrray sheerin-renewable-energy-storage-best-practice-at-tpl-and-issues-faced
james hamilton
Tariff and Economic aspects in Power Generation Base loads and Peak Loads Variable Load on Power Station Importance of Load Curves Types of Tariff
Economics of Power Generation
Economics of Power Generation
Niraj Solanki
Physics class 9
Work and energy
Work and energy
SangeethManojKumar
What's hot
(15)
Load characteristics and Economic Aspects
Load characteristics and Economic Aspects
Final FYP presentation new
Final FYP presentation new
POWER FACTOR IMPROVEMENT OF INDUSTRIAL LOAD BY MATLAB SIMULATION
POWER FACTOR IMPROVEMENT OF INDUSTRIAL LOAD BY MATLAB SIMULATION
Simulation of MPPT Algorithm Based Hybrid Wind-Solar-Fuel Cell Energy System
Simulation of MPPT Algorithm Based Hybrid Wind-Solar-Fuel Cell Energy System
Lecture 7 load duration curves
Lecture 7 load duration curves
The Eighteenth Annual Newfoundland Electrical and Computer Engineering Confer...
The Eighteenth Annual Newfoundland Electrical and Computer Engineering Confer...
Stochastic renewable energy resources integrated multi-objective optimal powe...
Stochastic renewable energy resources integrated multi-objective optimal powe...
Economic Load Dispatch for Multi-Generator Systems with Units Having Nonlinea...
Economic Load Dispatch for Multi-Generator Systems with Units Having Nonlinea...
Tarrif and load curves
Tarrif and load curves
Reference - Peak Management for Large Factory
Reference - Peak Management for Large Factory
Arc reactor
Arc reactor
Power management strategy for a multi hybrid fuel cell energy storage power ...
Power management strategy for a multi hybrid fuel cell energy storage power ...
Murrray sheerin-renewable-energy-storage-best-practice-at-tpl-and-issues-faced
Murrray sheerin-renewable-energy-storage-best-practice-at-tpl-and-issues-faced
Economics of Power Generation
Economics of Power Generation
Work and energy
Work and energy
Recently uploaded
This presentation dives into the practical applications of machine learning within Google's operations, providing a comprehensive overview of how to leverage AI technologies to solve real-world business challenges. Key Points Covered: - Introduction to Machine Learning at Google: Discussion on the role of ML and its evolution in enhancing Google's operational efficiency. - Experience Sharing: Insights into the team's long-term engagement with machine learning projects and the impacts on Google’s operational strategies. - Practical Applications: Real-world examples of ML applications within Google’s daily operations, providing a blueprint to adapt similar strategies. - Challenges and Solutions: Discussion on the challenges faced during the implementation of ML projects and the strategic solutions employed to overcome them. - Future of ML at Google: Insights into future trends in machine learning at Google and how they plan to continue integrating AI into their ecosystem.
Strategic AI Integration in Engineering Teams
Strategic AI Integration in Engineering Teams
UXDXConf
Partner Tech Talk with Tinybird
Speed Wins: From Kafka to APIs in Minutes
Speed Wins: From Kafka to APIs in Minutes
confluent
How WebAssembly can be used to optimize and accelerate Large Language Models Inference in the Cloud.
WebAssembly is Key to Better LLM Performance
WebAssembly is Key to Better LLM Performance
Samy Fodil
TEST BANK For, Information Technology Project Management 9th Edition Kathy Schwalbe.pdf TEST BANK For, Information Technology Project Management 9th Edition Kathy Schwalbe.pdf TEST BANK For, Information Technology Project Management 9th Edition Kathy Schwalbe.pdf
TEST BANK For, Information Technology Project Management 9th Edition Kathy Sc...
TEST BANK For, Information Technology Project Management 9th Edition Kathy Sc...
marcuskenyatta275
Brief Introduction to Generative AI and LLM in particular. Overview of the market, and usages of LLMs. What's it like to train and build a model. Retrieval Augmented Generation 101, explained for non savvies, and a perspective of what are the moving parts making it complex
AI presentation and introduction - Retrieval Augmented Generation RAG 101
AI presentation and introduction - Retrieval Augmented Generation RAG 101
vincent683379
FIDO Taipei Workshop: Securing the Edge with FDO
Secure Zero Touch enabled Edge compute with Dell NativeEdge via FDO _ Brad at...
Secure Zero Touch enabled Edge compute with Dell NativeEdge via FDO _ Brad at...
FIDO Alliance
Automation is transforming industries by streamlining operations and reducing costs. However, the success of automated systems hinges not only on their functionality but also on the user experience (UX). This talk, "The UX of Automated Processes," delves into the intricate relationship between automation and UX, providing a comprehensive guide to designing intuitive and effective automated systems. Key Topics Covered: 1. Introduction to Automated UX: * Understanding the importance of UX in automated systems * Real-world example: Robotic beer dispensers at a music festival 2. Step-by-Step Process for Enhancing Automated UX: * Step 0: Identifying main workflows and happy paths * Step 1: Conducting contextual inquiries to understand current user practices and edge cases * Step 2: Prioritizing issues and solutions through collaborative ideation sessions * Step 3: Prototyping and usability testing for both software and hardware 3. Prototyping and Testing: * Methods for simulating automated processes * Importance of user feedback in refining automated systems 4. Designing for Support Users: * Crafting the experience for support personnel who manage edge cases * Ensuring effective communication and issue prioritization for support users
The UX of Automation by AJ King, Senior UX Researcher, Ocado
The UX of Automation by AJ King, Senior UX Researcher, Ocado
UXDXConf
This presentation focuses on the challenges and strategies of connecting problem definitions within product development. Key Points Covered: - Kayak's mission since its inception in 2004 to simplify travel by enabling easy comparisons of flights through technological solutions. - Discussion of the complexities within the travel industry, including the high expectations for personalized user experiences and the various stakeholder influences. - Emphasis on the necessity of maintaining agility and innovation within a mature company through continuous reassessment of processes. - An explanation of the importance of disciplined problem definition to prevent project failures and team inefficiencies. - Introduction of strategies for effective communication across teams to ensure alignment and comprehension at all levels of project development. - Exploration of various problem-solving methodologies, including how to handle conflicts within team settings regarding problem definitions and project directions.
Connecting the Dots in Product Design at KAYAK
Connecting the Dots in Product Design at KAYAK
UXDXConf
I'm excited to share my latest predictions on how AI, robotics, and other technological advancements will reshape industries in the coming years. The slides explore the exponential growth of computational power, the future of AI and robotics, and their profound impact on various sectors. Why this matters: The success of new products and investments hinges on precise timing and foresight into emerging categories. This deck equips founders, VCs, and industry leaders with insights to align future products with upcoming tech developments. These insights enhance the ability to forecast industry trends, improve market timing, and predict competitor actions. Highlights: ▪ Exponential Growth in Compute: How $1000 will soon buy the computational power of a human brain ▪ Scaling of AI Models: The journey towards beyond human-scale models and intelligent edge computing ▪ Transformative Technologies: From advanced robotics and brain interfaces to automated healthcare and beyond ▪ Future of Work: How automation will redefine jobs and economic structures by 2040 With so many predictions presented here, some will inevitably be wrong or mistimed, especially with potential external disruptions. For instance, a conflict in Taiwan could severely impact global semiconductor production, affecting compute costs and related advancements. Nonetheless, these slides are intended to guide intuition on future technological trends.
Future Visions: Predictions to Guide and Time Tech Innovation, Peter Udo Diehl
Future Visions: Predictions to Guide and Time Tech Innovation, Peter Udo Diehl
Peter Udo Diehl
We're living the AI revolution and Salesforce is adapting and bring new value to their customers. Einstein products are evolving rapidly and navigating their limitations, language support, and use cases can be challenging. Let's make review of what Einstein product are available currently, what are the capabilities and what can be used for in CEE region and how Rossie.ai can help to learn Salesforce speak Czech. We will explore the Einstein roadmap and I will make a short live demo (based on your vote) of some Einstein feature.
AI revolution and Salesforce, Jiří Karpíšek
AI revolution and Salesforce, Jiří Karpíšek
CzechDreamin
FIDO Taipei Workshop: Securing the Edge with FDO
Introduction to FDO and How It works Applications _ Richard at FIDO Alliance.pdf
Introduction to FDO and How It works Applications _ Richard at FIDO Alliance.pdf
FIDO Alliance
As an SEO expert specializing in the IPTV and VPN niches with over five years of experience, I navigate the unique challenges of these industries adeptly. My strategic approach encompasses competitive analysis, targeted keyword research, content optimization, and high-quality backlink creation. My goal is to optimize my clients' online visibility, generating targeted organic traffic and maximizing their return on investment. With a results-driven approach and a passion for innovation, I'm poised to assist my clients in thriving in an ever-evolving digital landscape. <a href="https://iptvreel.com">
THE BEST IPTV in GERMANY for 2024: IPTVreel
THE BEST IPTV in GERMANY for 2024: IPTVreel
reely ones
A talk given by Julian Hyde at the San Francisco Distributed Systems Meetup on May 22, 2024.
Measures in SQL (a talk at SF Distributed Systems meetup, 2024-05-22)
Measures in SQL (a talk at SF Distributed Systems meetup, 2024-05-22)
Julian Hyde
The standard Salesforce Approval process can be limiting in many ways, especially in complex scenarios. What if there was a way to implement very flexible approvals where one can use Apex code to make data updates in unrelated records, dynamically generate next steps details, and compute assignees on the fly? And still use UI-based configurations to implement concrete approval processes. In this session, we will share ideas behind such a solution and show a few lines of code to get you started.
Custom Approval Process: A New Perspective, Pavel Hrbacek & Anindya Halder
Custom Approval Process: A New Perspective, Pavel Hrbacek & Anindya Halder
CzechDreamin
This is the official company presentation of IoT Analytics GmbH, a leading global provider of market insights and strategic business intelligence for the IoT, AI, Cloud, Edge, and Industry 4.0. We are trusted by 1000+ leading companies around the world for our market insights, including globally leading software, telecommunications, consulting, semiconductor, and industrial players.
IoT Analytics Company Presentation May 2024
IoT Analytics Company Presentation May 2024
IoTAnalytics
Screen flow is a powerful automation tool that is commonly designed for internal and external users. However, what about the guest users? We will dive into various methods of launching screen flows and understand how to make them publicly accessible, extending their usability to a broader audience. The presentation will also cover the implementation of security layers and highlight best practices for a smooth and protected user experience. Discover the potential of screen flows beyond conventional use and learn how to leverage them effectively.
Free and Effective: Making Flows Publicly Accessible, Yumi Ibrahimzade
Free and Effective: Making Flows Publicly Accessible, Yumi Ibrahimzade
CzechDreamin
FIDO Taipei Workshop: Securing the Edge with FDO
FDO for Camera, Sensor and Networking Device – Commercial Solutions from VinC...
FDO for Camera, Sensor and Networking Device – Commercial Solutions from VinC...
FIDO Alliance
This is a powerpoint that features Microsoft Teams Devices and everything that is new including updates to its software and devices for April 2024
What's New in Teams Calling, Meetings and Devices April 2024
What's New in Teams Calling, Meetings and Devices April 2024
Stephanie Beckett
Already know how to write a basic SOQL query? Great! But what about an *aggregate* SOQL query? You know, the kind that uses aggregate functions like COUNT & MAX along with GROUP BY and HAVING clauses? No? Well, get ready to learn how to slice & dice your org’s data right inside your own dev console. From finding duplicate records to prototyping summary & matrix reports, learn the ins and outs of aggregate queries during this fast-paced but admin-friendly session on advanced SOQL concepts.
SOQL 201 for Admins & Developers: Slice & Dice Your Org’s Data With Aggregate...
SOQL 201 for Admins & Developers: Slice & Dice Your Org’s Data With Aggregate...
CzechDreamin
The presentation was prepared for the event called "Google I/O Extended Warsaw" organized by GDG Warsaw with the help of GDSC PJATK
Google I/O Extended 2024 Warsaw
Google I/O Extended 2024 Warsaw
GDSC PJATK
Recently uploaded
(20)
Strategic AI Integration in Engineering Teams
Strategic AI Integration in Engineering Teams
Speed Wins: From Kafka to APIs in Minutes
Speed Wins: From Kafka to APIs in Minutes
WebAssembly is Key to Better LLM Performance
WebAssembly is Key to Better LLM Performance
TEST BANK For, Information Technology Project Management 9th Edition Kathy Sc...
TEST BANK For, Information Technology Project Management 9th Edition Kathy Sc...
AI presentation and introduction - Retrieval Augmented Generation RAG 101
AI presentation and introduction - Retrieval Augmented Generation RAG 101
Secure Zero Touch enabled Edge compute with Dell NativeEdge via FDO _ Brad at...
Secure Zero Touch enabled Edge compute with Dell NativeEdge via FDO _ Brad at...
The UX of Automation by AJ King, Senior UX Researcher, Ocado
The UX of Automation by AJ King, Senior UX Researcher, Ocado
Connecting the Dots in Product Design at KAYAK
Connecting the Dots in Product Design at KAYAK
Future Visions: Predictions to Guide and Time Tech Innovation, Peter Udo Diehl
Future Visions: Predictions to Guide and Time Tech Innovation, Peter Udo Diehl
AI revolution and Salesforce, Jiří Karpíšek
AI revolution and Salesforce, Jiří Karpíšek
Introduction to FDO and How It works Applications _ Richard at FIDO Alliance.pdf
Introduction to FDO and How It works Applications _ Richard at FIDO Alliance.pdf
THE BEST IPTV in GERMANY for 2024: IPTVreel
THE BEST IPTV in GERMANY for 2024: IPTVreel
Measures in SQL (a talk at SF Distributed Systems meetup, 2024-05-22)
Measures in SQL (a talk at SF Distributed Systems meetup, 2024-05-22)
Custom Approval Process: A New Perspective, Pavel Hrbacek & Anindya Halder
Custom Approval Process: A New Perspective, Pavel Hrbacek & Anindya Halder
IoT Analytics Company Presentation May 2024
IoT Analytics Company Presentation May 2024
Free and Effective: Making Flows Publicly Accessible, Yumi Ibrahimzade
Free and Effective: Making Flows Publicly Accessible, Yumi Ibrahimzade
FDO for Camera, Sensor and Networking Device – Commercial Solutions from VinC...
FDO for Camera, Sensor and Networking Device – Commercial Solutions from VinC...
What's New in Teams Calling, Meetings and Devices April 2024
What's New in Teams Calling, Meetings and Devices April 2024
SOQL 201 for Admins & Developers: Slice & Dice Your Org’s Data With Aggregate...
SOQL 201 for Admins & Developers: Slice & Dice Your Org’s Data With Aggregate...
Google I/O Extended 2024 Warsaw
Google I/O Extended 2024 Warsaw
Combined Cycle Power Plant
1.
Combined Cycle Power
Plant
Download now