Workplace Training Centre NSW has a forklift training course which helps freshers to obtain a licence which covers all the requirements to work with a national High Risk Work Licence (Class LF) for forklifts.
2. Is Forklift
Training
Necessary?
About 100 deaths each year
About 95,000 accidents each year
Such incidents are impacting the lives of workers and families in
terms of physical suffering and mental suffering.
Without ForkliftTraining:
3. Is Forklift
Training
Necessary?
With Forklift Licence Sydney:
The proper forklift training will reduce, or even prevent, accidents
from happening on the job site.
It'll also train operators on how to deal with elevated loads that
can possibly tip the forklift over.
Prevent tip-over accidents by keeping the load as low as possible.
4. SafeWork
NSW
Conditions for
Assessment
Applicants to be at least 18 years of age
Able to produce 100 points or more of identification as per the
SafeWork NSW identification checklist.
Speak and understand English at a level to be able to participate in
the training and assessment.
5. Learning
Outcome
On completion of the forklift training course, participants will
have gained the following skills and knowledge to:
Plan Operations: Hazard management and consultation
Pre-operational Inspections: forklift and associated equipment
Shift Loads: Lifting at varying heights and travelling through
obstacles
Conclude Operations: Parking, securing the equipment and
following site specific procedures
6. Learning
Outcome
Forklifts are more hazardous than most people usually perceive
them to be
Pre-use inspections must be performed before each day or shift
It is important to understand how the load will affect the stability
of the forklift
The operator must always be on the lookout for hazards and
pedestrians
7. Location of
Training
Training can be conducted atWorkplaceTrainingCentre’s facilities
located in Arndell Park NSW.
Training can also be conducted on your site providing the
following requirements are met:
Training room with tables, chairs and screen (or blank wall for a
projector)
Suitable clear operating area
Forklift (in serviceable condition with no faults and operator
manual present)
Low, Medium and High lifting levels, such as pallet racking with
three varied types of loads
Workplace Training Centre NSW has a forklift training course which helps freshers to obtain a licence which covers all the requirements to work with a national High Risk Work Licence (Class LF) for forklifts. On completion of course one can operate a forklift including counterbalance, reach trucks and high reach forklifts within Australia. The course involves only 3 days practical training including assessment.