3. GROUP MEMBERS
Md. Sohel Rana 11420158
Shah Md Mizanur Rahman 13310404
Mst. Shearmin Akter 12320285
Kaisari khanom 12320131
4. SUPERVISED BY
MOHAMMAD EKRAMUL KABIR
Assistant Professor
Department of Electronics and Communication Engineering (ECE)
University of Information Technology & Sciences (UITS)
5. OBJECTIVE
The main objective of this project is to find the
accident spot at any place and intimating it to
ambulance through the GPS and GSM networks.
6. Overview
MEMS Sensor used to detect abrupt
vibration when an accident occurs
Detection and messaging system composed
of a GPS receiver , microcontroller and
GSM modem
GSM modem sends message to the
predefined/owner mobile number
14. WORKING
Whenever any accident occurs vibration sensor detect and sends
electrical signal to the ADC channel of the PIC microcontroller
By using GPS , we will get particular location where accident occurs
,then GSM sends message to authorized mobile number .
The GPS positioning is done in the form of latitude and longitude
along with the exact location of the place by making Google maps
15. ADVANTAGES
The vehicle which has undergone to an accident can be identified by using
tracking technology without any delay
The immediate medication will be provided to the accident victims in the
remote areas
Mobile number can be changed at any time
16. DISADVANTAGES
In some places where there is no provision of GSM
networks it is difficult for communication
17. FUTURE SCOPE
Automotive Security System
This can also be developed by interconnecting a camera to the
controller module that takes the photograph of the accident spot
that makes tracking easier
18. CONCLUSION
To minimize the deaths and severe conditions due to accidents the GPS and
GSM technologies are used where immediate action would be take place by
the ambulance/police service which might reduces the severity