The Pressure Right wrist strip is designed to apply targeted pressure to the P6 acupressure point on the wrist to help reduce nausea and vomiting. It uses an adhesive backing to keep the plastic dome firmly placed over the P6 point for an extended period, providing relief without medication. The strip is applied using a locator guide to identify the P6 point on both wrists. Placing the plastic dome over the marked points and securing the adhesive strip helps stimulate the P6 point within five minutes to alleviate nausea and vomiting associated with conditions like surgery, chemotherapy, or motion sickness.

1. Product Introduction:
The philosophy of acupressure began in Asia several centuries ago, based on the
effective implementation of acupressure points in the human body. It followed
acupuncture and continues to be used today for treating various medical
aliments as an alternative or adjunct to pharmaceuticals for enhanced relief.
The PRESSURE RIGHT underlying function is to operate as an adhesive
acupressure wrist strip, which can benefit individuals with its use of applying a
small pressure dome on the P6 acupressure point to help reduce the effects of
nausea and/or vomiting associated with surgery, chemotherapy, morning
sickness or motion sickness.
Its adhesive backing which is hypoallergenic and latex-free, allows the wrist strip
to remain in place (including while sleeping) on the P6 relief pressure point for an
extended period. It was developed to provide relief of nausea and vomiting
occurrences without medication-related side-effects.
Pressure Right may be used either before or after onset of nausea and/or
vomiting occurrences and its P6 effect usually takes five-minutes to become
effective. Each package contains two disposable strips, which are to be applied
on both wrists when applying the strips.
Product Instructions:
Step1 – Use the green P6 locator guide with the arrow pointing towards the palm,
by placing the guide on the midline of the patient’s inner wrist beginning from the
first wrist crease nearest the palm.
Step2 – Place the patient’s middle fingers, closely together, placing the ring
finger on the first crease nearest the palm on the center of the P6 locator guide.
Step3 – Mark the perforated location under the index finger on the P6 locator
guide to identify the individual’s P6 pressure point. Use the P6 locator guide on
both wrists.
Page 1 of 2

2. Step4 – Remove the liner from the adhesive strip and apply the plastic dome (face
side down) on the designated P6 location on both wrists between the two central
tendons.
Step5 – After placing the plastic dome on the P6 point, apply the Pressure Right
strip starting with the short side first on the inner wrist and then pull the adhesive
strip across the entire wrist area.
Greater relief can be gained by applying finger pressure on the plastic pressure
dome when necessary.
See illustration below for applying the Pressure Right wrist strip.
See photo of Pressure Right on the wrist.
Page 2 of 2