Ladder check list
•
0 likes•540 views
This document contains inspection records for ladders with serial numbers and remarks. The records note the date, location, serial number, remarks on the status of each ladder, the ladder type, size, and signature of the inspector. In total, 50 ladders were inspected on two separate dates in location AZ, with most noted as "ok" but some noted as "transfer".
Report
Share
Report
Share
Download to read offline
Recommended
Website, Flow Chart
The metal finishing process at Clybourn involves shipping and receiving parts, preparing them through polishing, buffing, and plating, and inspecting them to ensure quality. Parts are given an initial inspection, polished to remove imperfections, and buffed to achieve the desired finish. They then undergo vapor degreasing, chrome plating if needed, and final inspection before receiving finishing touches and being shipped out or polished and buffed only.
Guidelines Prevention of Falls
This document provides guidelines for preventing falls at Universiti Tunku Abdul Rahman (UTAR). It outlines UTAR's commitment to ensuring workplace safety, and the responsibilities of UTAR employees and non-employees to adhere to safety policies and use protective equipment. The guidelines cover general safety measures, fall protection systems, scaffolding, ladders, roof access, excavation work, and other potential fall hazards. Appendices provide checklists and diagrams to supplement the guidelines.
Training confined space entry holewatch man [compatibility mode]
The duty of the hole watch is to monitor entrants in confined spaces and ensure safety. A hole watch must:
- Maintain communication with entrants and monitor conditions inside and outside the space
- Attend safety meetings and enforce the confined space entry permit
- Track personnel entering and exiting, initiate emergency response if needed, and prevent unauthorized entry
- Notify entrants if conditions change requiring evacuation
Risk assessment for testing & commissioning of cranes
Overhead crane, crane safety, lifting operation, EHS, Safety, Testing of Crane, Commissioning of Cranes,
for soft copy please email me at dawoodibrar@hotmail.com
Electricity, Electrical Safety, Electrocution,
Electricity poses serious dangers that should not be underestimated. While 110 volts can kill, the risk depends on individual body resistance and conditions. Insulation failures in portable electric tools can cause electric shock, burns or falls. Electricity always seeks the lowest resistance path to ground through things like pipes, which increases the risk in wet conditions when body resistance is lower. When working in wet areas, take precautions like using wooden platforms or rubber boots and inspecting tools for defects. Regular tool inspections are important to catch any issues since just 1/10 of an amp can kill.
Drivign permit form
This document outlines the rules for operating vehicles at a site, including always wearing a seatbelt, not exceeding 25 KPH, using a spotter while reversing, stopping for pedestrians, conducting pre-inspection checks, reporting any defects, not exiting the vehicle except in parking areas, maintaining a 10m distance during tipping and between vehicles, and not using a mobile phone while driving. It also provides emergency contact numbers and spaces to attach license and certification copies.
Recommended
Website, Flow Chart
The metal finishing process at Clybourn involves shipping and receiving parts, preparing them through polishing, buffing, and plating, and inspecting them to ensure quality. Parts are given an initial inspection, polished to remove imperfections, and buffed to achieve the desired finish. They then undergo vapor degreasing, chrome plating if needed, and final inspection before receiving finishing touches and being shipped out or polished and buffed only.
Guidelines Prevention of Falls
This document provides guidelines for preventing falls at Universiti Tunku Abdul Rahman (UTAR). It outlines UTAR's commitment to ensuring workplace safety, and the responsibilities of UTAR employees and non-employees to adhere to safety policies and use protective equipment. The guidelines cover general safety measures, fall protection systems, scaffolding, ladders, roof access, excavation work, and other potential fall hazards. Appendices provide checklists and diagrams to supplement the guidelines.
Training confined space entry holewatch man [compatibility mode]
The duty of the hole watch is to monitor entrants in confined spaces and ensure safety. A hole watch must:
- Maintain communication with entrants and monitor conditions inside and outside the space
- Attend safety meetings and enforce the confined space entry permit
- Track personnel entering and exiting, initiate emergency response if needed, and prevent unauthorized entry
- Notify entrants if conditions change requiring evacuation
Risk assessment for testing & commissioning of cranes
Overhead crane, crane safety, lifting operation, EHS, Safety, Testing of Crane, Commissioning of Cranes,
for soft copy please email me at dawoodibrar@hotmail.com
Electricity, Electrical Safety, Electrocution,
Electricity poses serious dangers that should not be underestimated. While 110 volts can kill, the risk depends on individual body resistance and conditions. Insulation failures in portable electric tools can cause electric shock, burns or falls. Electricity always seeks the lowest resistance path to ground through things like pipes, which increases the risk in wet conditions when body resistance is lower. When working in wet areas, take precautions like using wooden platforms or rubber boots and inspecting tools for defects. Regular tool inspections are important to catch any issues since just 1/10 of an amp can kill.
Drivign permit form
This document outlines the rules for operating vehicles at a site, including always wearing a seatbelt, not exceeding 25 KPH, using a spotter while reversing, stopping for pedestrians, conducting pre-inspection checks, reporting any defects, not exiting the vehicle except in parking areas, maintaining a 10m distance during tipping and between vehicles, and not using a mobile phone while driving. It also provides emergency contact numbers and spaces to attach license and certification copies.
Defensive driving azmeel
This document provides information on defensive driving techniques for different age groups of drivers, safety tips, and hazard awareness. It discusses that younger drivers aged 16-20 have the highest number of aggressive driving crashes, while drivers tend to drive more cautiously after age 30. Key safety tips included are maintaining adequate following distance, checking mirrors frequently, scanning ahead, wearing seatbelts, driving within your abilities, and adjusting driving based on road and weather conditions. The document emphasizes defensive driving practices like avoiding confrontations, allowing other vehicles to merge safely, and using horns sparingly.
Weekly welding machine checklist
This welding machine daily inspection checklist contains 14 items to check such as oil, fuel, and water leakage, electrolyte levels, coolant levels, air filters, fans, emissions, wiring, piping, instruments, grounding, output power, leads, tires, inspection stickers, and fire extinguishers. The unnamed contractor supervisor or foreman is tasked with inspecting these items on a welding machine and recording any remarks daily for a given week at an unspecified project or location.
Weekly scaffolding checklist
A weekly scaffolding inspection checklist was completed for a construction site. The competent person inspected the scaffolding's tag and information, bracing, clamps, ties, safety rails, platforms, planks, and ladders. Any issues were noted as good or poor. The inspection ensures the scaffolding is properly constructed and maintained for worker safety.
Weekly generator check list
This generator daily inspection checklist documents routine inspections for a generator used on Project098-C58. It lists 14 items to check such as oil, fuel, and water levels, emissions, wiring connections, instruments, grounding, output power, and safety equipment. The contractor supervisor signs off after inspecting the generator each date, noting any remarks.
Weekly first aid room checklist
The weekly first aid room checklist documents 15 items to be inspected in the first aid room including medical waste bins, beds, toiletries, equipment, and appliances. The form is to be completed by the project male nurse, concurred by the safety manager, and returned at the end of the week to the contractor safety manager.
Weekly excavation checklist
This weekly inspection checklist documents an excavation site inspection. It lists the competent person who performed the inspection, the excavation location and date. It then lists 15 items that were checked for safety compliance, including daily inspections of the excavation and adjacent areas, use of proper PPE, adequate sloping or shoring of deep excavations, and protections from falling material, water accumulation, and cave-ins. Upon completion of the inspection, the contractor supervisor signs off to confirm the excavation meets safety standards.
Weekly ambulance checklist
This document contains a weekly ambulance checklist for Association of Abu-Nayyan, Azmeel & Saudi Tumpane dated [DATE]. It lists 47 items related to the general vehicle components, engine compartment, and underside that are inspected for an ambulance with Make [MAKE] and Model [MODEL]. The inspected ambulance is designated to Nurse Mahdi Ameen Jaffar and driven by Mr. Hilal Sha. The checklist notes the condition of each item as good, fair, needing repair, or not applicable. Signatures are included from the inspector, driver, nurse, and safety manager to acknowledge the inspection.
Weekly air compressor check list
This daily inspection checklist is used to inspect an air compressor on a weekly basis. It includes 14 items to check such as oil, fuel, and water levels; air impeller and radiator coolant levels; moisture in the air receiver tank; safety valve actuation; wiring and piping connections; grounding; emissions; air hose connections; whiplash arrestor; color-coded inspection stickers; and fire extinguishers. For each inspection, the operator's name and date are recorded along with any remarks.
Water tanker log sheet
This document is a log sheet to record water tanker details for filling a test water tank. It contains columns to note the date, time in, time out, quantity of water filled, driver details, tanker registration number, and representatives from the client and contractor who witnessed the filling. The total time taken to fill the tank is also recorded.
Water cooler monthly
Drinking water shall only come from portable water sources and be tested monthly. Filters must be replaced weekly with the next due date posted, and coolers disinfected every two days or if unused for seven days. A daily cleaning checklist requires signatures to ensure proper hygiene, storage, and maintenance of water refilling stations.
Vehicle plant daily inspection log
The document is a daily inspection log for a vehicle used by Azmeel In Association With Abunayyan & Saudi Tumpane. It contains a checklist of 15 items to inspect including fluid levels, lights, tires, brakes, mirrors and attachments. The log runs from Saturday to Friday and is signed by the driver and transport foreman to confirm inspection of the vehicle.
Toilet cleaning check list
This document is a weekly cleaning checklist for a clinic recording the availability of cleaning supplies like tissues and waste bins as well as cleaning activities like floor cleaning at different times of the day and days of the week. It also records the name of the person who performed the cleaning each day and includes their signature.
Scissor lift 2 daily inspection log
The document is a checklist for inspecting a scissor lift. It contains questions to check for debris, overhead obstructions, the work surface's ability to support the lift, and the environment's suitability. It also has sections to check that required personal protective equipment is available and in good condition, that the operator is trained and authorized, and that the overall machine condition is acceptable. Additional sections check that ground and platform controls function properly, emergency controls work from the ground, outriggers function if equipped, lug nuts are tight, cables and wires are secure, guardrails are in good condition, and placards/warnings are legible. The checklist also prompts inspecting fluid levels, for leaks, loose/missing parts
Scaffold & fall arest checklist
The document contains inspection records and checklists for scaffolding, fall arrest systems (harnesses), and ladders used on a construction project. The scaffolding records include information on type, size, dates of erection and dismantling, and inspector signatures. The harness inspection checklist includes details to check each month like snap hooks, lanyard arms, and safety latches. The ladder inspection checklist includes criteria to evaluate hardware, wood/metal condition, rigidity, steps, corrosion, dents/bends, safety feet/ropes, and space for inspector comments.
Powder actuated tool
This document is a log sheet to track the issuance and return of powder cartridges and nail cartridges used in powder actuated tools. It lists the date items are issued and returned along with spaces for store and operator signatures to record when cartridges are given out and returned.
Patients weekly report form
This weekly report from a hospital documents the number of patients treated for various common illnesses and injuries. It includes data on first aid cases, recordable and restricted injuries, and fatalities. The report also lists the total number of patients seen broken down by conditions such as upper respiratory infections, backaches, gastritis, diarrhea, colds and flu, and several other diseases. It appears to be signed by the nurse and safety manager documenting the data.
Patients monthly report form
This document appears to be a monthly patient report from a medical facility listing various common diseases and injuries treated. It includes categories for first aid cases, recordable and restricted injuries, fatalities, lost time injuries, hospital referrals, and total patients for the month. The document provides quantitative data but is missing specific numbers or details about individual patients.
Observation check list by safety officer
This safety observation report documents a site visit where potential safety issues were observed and categorized. Corrective actions were recommended and follow ups will track the status of addressing each issue. The report aims to improve safety practices on an construction project through monitoring and feedback.
Monthly walk through schedule month of september 2013
The document contains the weekly walkthrough schedule for the 098 C-58 project for the month of May 2015. It lists the date, day, contractors and representatives attending from the RC and contractor, time, and location for each weekly walkthrough during the month. The ES&H Manager Dawood Akbar and representatives from the contractor will participate in walkthroughs of the lay down area and construction site each Sunday in May at 07:30-08:30 am to review safety and make improvements.
More Related Content
More from Azmeel Contracting Company
Defensive driving azmeel
This document provides information on defensive driving techniques for different age groups of drivers, safety tips, and hazard awareness. It discusses that younger drivers aged 16-20 have the highest number of aggressive driving crashes, while drivers tend to drive more cautiously after age 30. Key safety tips included are maintaining adequate following distance, checking mirrors frequently, scanning ahead, wearing seatbelts, driving within your abilities, and adjusting driving based on road and weather conditions. The document emphasizes defensive driving practices like avoiding confrontations, allowing other vehicles to merge safely, and using horns sparingly.
Weekly welding machine checklist
This welding machine daily inspection checklist contains 14 items to check such as oil, fuel, and water leakage, electrolyte levels, coolant levels, air filters, fans, emissions, wiring, piping, instruments, grounding, output power, leads, tires, inspection stickers, and fire extinguishers. The unnamed contractor supervisor or foreman is tasked with inspecting these items on a welding machine and recording any remarks daily for a given week at an unspecified project or location.
Weekly scaffolding checklist
A weekly scaffolding inspection checklist was completed for a construction site. The competent person inspected the scaffolding's tag and information, bracing, clamps, ties, safety rails, platforms, planks, and ladders. Any issues were noted as good or poor. The inspection ensures the scaffolding is properly constructed and maintained for worker safety.
Weekly generator check list
This generator daily inspection checklist documents routine inspections for a generator used on Project098-C58. It lists 14 items to check such as oil, fuel, and water levels, emissions, wiring connections, instruments, grounding, output power, and safety equipment. The contractor supervisor signs off after inspecting the generator each date, noting any remarks.
Weekly first aid room checklist
The weekly first aid room checklist documents 15 items to be inspected in the first aid room including medical waste bins, beds, toiletries, equipment, and appliances. The form is to be completed by the project male nurse, concurred by the safety manager, and returned at the end of the week to the contractor safety manager.
Weekly excavation checklist
This weekly inspection checklist documents an excavation site inspection. It lists the competent person who performed the inspection, the excavation location and date. It then lists 15 items that were checked for safety compliance, including daily inspections of the excavation and adjacent areas, use of proper PPE, adequate sloping or shoring of deep excavations, and protections from falling material, water accumulation, and cave-ins. Upon completion of the inspection, the contractor supervisor signs off to confirm the excavation meets safety standards.
Weekly ambulance checklist
This document contains a weekly ambulance checklist for Association of Abu-Nayyan, Azmeel & Saudi Tumpane dated [DATE]. It lists 47 items related to the general vehicle components, engine compartment, and underside that are inspected for an ambulance with Make [MAKE] and Model [MODEL]. The inspected ambulance is designated to Nurse Mahdi Ameen Jaffar and driven by Mr. Hilal Sha. The checklist notes the condition of each item as good, fair, needing repair, or not applicable. Signatures are included from the inspector, driver, nurse, and safety manager to acknowledge the inspection.
Weekly air compressor check list
This daily inspection checklist is used to inspect an air compressor on a weekly basis. It includes 14 items to check such as oil, fuel, and water levels; air impeller and radiator coolant levels; moisture in the air receiver tank; safety valve actuation; wiring and piping connections; grounding; emissions; air hose connections; whiplash arrestor; color-coded inspection stickers; and fire extinguishers. For each inspection, the operator's name and date are recorded along with any remarks.
Water tanker log sheet
This document is a log sheet to record water tanker details for filling a test water tank. It contains columns to note the date, time in, time out, quantity of water filled, driver details, tanker registration number, and representatives from the client and contractor who witnessed the filling. The total time taken to fill the tank is also recorded.
Water cooler monthly
Drinking water shall only come from portable water sources and be tested monthly. Filters must be replaced weekly with the next due date posted, and coolers disinfected every two days or if unused for seven days. A daily cleaning checklist requires signatures to ensure proper hygiene, storage, and maintenance of water refilling stations.
Vehicle plant daily inspection log
The document is a daily inspection log for a vehicle used by Azmeel In Association With Abunayyan & Saudi Tumpane. It contains a checklist of 15 items to inspect including fluid levels, lights, tires, brakes, mirrors and attachments. The log runs from Saturday to Friday and is signed by the driver and transport foreman to confirm inspection of the vehicle.
Toilet cleaning check list
This document is a weekly cleaning checklist for a clinic recording the availability of cleaning supplies like tissues and waste bins as well as cleaning activities like floor cleaning at different times of the day and days of the week. It also records the name of the person who performed the cleaning each day and includes their signature.
Scissor lift 2 daily inspection log
The document is a checklist for inspecting a scissor lift. It contains questions to check for debris, overhead obstructions, the work surface's ability to support the lift, and the environment's suitability. It also has sections to check that required personal protective equipment is available and in good condition, that the operator is trained and authorized, and that the overall machine condition is acceptable. Additional sections check that ground and platform controls function properly, emergency controls work from the ground, outriggers function if equipped, lug nuts are tight, cables and wires are secure, guardrails are in good condition, and placards/warnings are legible. The checklist also prompts inspecting fluid levels, for leaks, loose/missing parts
Scaffold & fall arest checklist
The document contains inspection records and checklists for scaffolding, fall arrest systems (harnesses), and ladders used on a construction project. The scaffolding records include information on type, size, dates of erection and dismantling, and inspector signatures. The harness inspection checklist includes details to check each month like snap hooks, lanyard arms, and safety latches. The ladder inspection checklist includes criteria to evaluate hardware, wood/metal condition, rigidity, steps, corrosion, dents/bends, safety feet/ropes, and space for inspector comments.
Powder actuated tool
This document is a log sheet to track the issuance and return of powder cartridges and nail cartridges used in powder actuated tools. It lists the date items are issued and returned along with spaces for store and operator signatures to record when cartridges are given out and returned.
Patients weekly report form
This weekly report from a hospital documents the number of patients treated for various common illnesses and injuries. It includes data on first aid cases, recordable and restricted injuries, and fatalities. The report also lists the total number of patients seen broken down by conditions such as upper respiratory infections, backaches, gastritis, diarrhea, colds and flu, and several other diseases. It appears to be signed by the nurse and safety manager documenting the data.
Patients monthly report form
This document appears to be a monthly patient report from a medical facility listing various common diseases and injuries treated. It includes categories for first aid cases, recordable and restricted injuries, fatalities, lost time injuries, hospital referrals, and total patients for the month. The document provides quantitative data but is missing specific numbers or details about individual patients.
Observation check list by safety officer
This safety observation report documents a site visit where potential safety issues were observed and categorized. Corrective actions were recommended and follow ups will track the status of addressing each issue. The report aims to improve safety practices on an construction project through monitoring and feedback.
Monthly walk through schedule month of september 2013
The document contains the weekly walkthrough schedule for the 098 C-58 project for the month of May 2015. It lists the date, day, contractors and representatives attending from the RC and contractor, time, and location for each weekly walkthrough during the month. The ES&H Manager Dawood Akbar and representatives from the contractor will participate in walkthroughs of the lay down area and construction site each Sunday in May at 07:30-08:30 am to review safety and make improvements.
More from Azmeel Contracting Company (20)
Monthly walk through schedule month of september 2013
Monthly walk through schedule month of september 2013
Recently uploaded
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
Recently uploaded (20)
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Ladder check list
- 1. Date: Location Serial No Remarks 33 AZ ok 32 AZ ok 34 AZ ok 36 AZ ok 37 AZ transfer 38 AZ transfer 35 AZ ok 31 AZ ok 2 AZ ok 1 AZ ok 26 AZ ok 39 AZ transfer 3 AZ ok 4 AZ ok 24 AZ ok 20 AZ ok 40 AZ ok 9 AZ transfer 11 AZ ok 12 AZ ok 13 AZ ok 14 AZ ok 15 AZ ok 16 AZ transfer 6 AZ transfer Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight Straight 6m 6m 6m 3m Straight Straight Straight 4m 6m 6m 6m 4m 6m 6m 6m 4m 6m 4m 4m 4mStraight Straight Straight 6m 5m 6m 6m 4m 6m Ladder Size Signature of Inspector Name of Inspector: Type Straight Straight Straight Straight Straight Straight Straight Straight 4m 2m
- 2. Date: Location Serial No Remarks 5 AZ Transfer 2 AZ Ok 8 AZ Ok 21 AZ Ok 22 AZ Ok 23 AZ ok 17 AZ Transfer 29 AZ Transfer 40 AZ Transfer 27 AZ Ok 28 AZ Ok 30 AZ Ok 41 AZ Ok 7 AZ Ok 42 AZ Ok 43 AZ Ok 44 AZ Transfer 45 AZ Ok 46 AZ Ok 47 AZ Ok 48 AZ Ok 49 AZ Ok 50 AZ OkStraight Straight 4m 1.5m Straight 4m Straight 4m Straight 3m Straight 4m Straight 4m Straight 4m Straight 2.5m Straight 4m Straight 6m Straight 2.5m Straight 6m Straight 6m Straight 4m Straight 4m Straight 2.5m Straight 4m Straight 4m Straight 3m Straight 2m Straight 6m Straight 3m Name of Inspector: Type Ladder Size Signature of Inspector