VDF (Vaccum Dewatered Flooring) & back filling
•
3 likes•3,018 views
This document provides instructions for back filling and area filling using sandy soil. It describes the process of removing loose particles from column footings, importing sandy soil and testing it, marking the footing in 9 inch intervals, compacting 6 inch layers of moistened soil around columns up to the footing level using a soil compactor, then repeating to the ground level, spreading an 8 inch layer of soil over the area, watering as advised, and using a vibro roller to compact the soil in 6 inch layers to the required level.
Report
Share
Report
Share
Recommended
Integrated Design
The document discusses the integration of a building with a contextual system including a core frame, floors, and skin. It provides sun path diagrams for spring, summer, fall and winter as well as floor plans for the ground and fifth floors with labels for areas like the business lobby and restaurant.
project proposal takunda mubaiwa
This project proposal aims to survey exploration holes at Makomo Resources' main pit to calculate stripping ratios for mining block cut 7. The objectives are to establish control points, set up a baseline, traverse the area, survey exploration holes, and calculate volumes and stripping ratios. This will help determine the overburden and coal to be mined, providing an updated mining plan as required by regulations. The methodology will include office and field reconnaissance, establishing a baseline, triangulation, spotting exploration holes, and calculating volumes and stripping ratios. The expected results are cross-sectional plans, a surface plan, volume calculations, and stripping ratios.
VDF- Vaccum Dewatered Flooring
Vacuum Dewatered Flooring (VDF) is a concrete flooring method that uses vacuum dewatering to remove excess water from freshly placed concrete, lowering the water-cement ratio and improving the concrete's properties. The concrete is placed conventionally, then vibrated and leveled before a vacuum pump and suction mat remove 15-25% of the water. This increases compressive strength and reduces shrinkage and cracking. Advantages of VDF include monolithic, shrinkage-free floors in large panels up to 100 sqm, very high strength, controlled finishes, and high daily output.
Vacuum concrete
1. Vacuum concrete involves mixing concrete with high water content to improve workability, then extracting extra water using vacuum dewatering to reduce the water-cement ratio and improve strength and durability.
2. A series of experiments investigated the effects of various factors on the volume of water extracted and the compressive strength distribution within vacuum concrete slabs. Higher slump, lower strength, thicker slabs, and earlier vacuum treatment resulted in more water extracted.
3. Vacuum treatment improved compressive strengths throughout the slab thickness but particularly at upper layers, reducing the strength gradient. Strengths were highest with later vacuum treatment and lower water-cement ratios.
Industrial flooring
EPA Infrastructure Pvt. Limited provides various types of industrial flooring systems suitable for different applications. The document discusses vacuum dewatered flooring/trimix, PU flooring, PE foam flooring, and epoxy flooring. Vacuum dewatered flooring involves removing excess water from concrete through vacuuming, resulting in stronger, more durable floors. PU and epoxy flooring provide scratch and impact resistance along with long lifespan. PE foam flooring is lightweight and absorbs sound and impact vibrations while being moisture and mold resistant. All of these flooring types deliver strength, durability, and maintenance benefits for industrial settings.
Vacuum concrete
Vacuum concrete adalah beton yang setelah diaduk dan dituang, air sisa reaksinya disedot menggunakan pompa vakum khusus untuk meningkatkan kekuatan beton hingga 25% dan mengurangi permeabilitas serta mempercepat proses finishing dan pelepasan bekisting. Teknik ini memberikan keuntungan berupa peningkatan kualitas dan pengikatan beton. Aplikasinya meliputi lantai industri, tempat parkir, dan dasar jembatan.
Vaccum Dewatered Flooring
We take pleasure to introduce ourselves as the leading Applicator of Industrial Flooring works in India
Recommended
Integrated Design
The document discusses the integration of a building with a contextual system including a core frame, floors, and skin. It provides sun path diagrams for spring, summer, fall and winter as well as floor plans for the ground and fifth floors with labels for areas like the business lobby and restaurant.
project proposal takunda mubaiwa
This project proposal aims to survey exploration holes at Makomo Resources' main pit to calculate stripping ratios for mining block cut 7. The objectives are to establish control points, set up a baseline, traverse the area, survey exploration holes, and calculate volumes and stripping ratios. This will help determine the overburden and coal to be mined, providing an updated mining plan as required by regulations. The methodology will include office and field reconnaissance, establishing a baseline, triangulation, spotting exploration holes, and calculating volumes and stripping ratios. The expected results are cross-sectional plans, a surface plan, volume calculations, and stripping ratios.
VDF- Vaccum Dewatered Flooring
Vacuum Dewatered Flooring (VDF) is a concrete flooring method that uses vacuum dewatering to remove excess water from freshly placed concrete, lowering the water-cement ratio and improving the concrete's properties. The concrete is placed conventionally, then vibrated and leveled before a vacuum pump and suction mat remove 15-25% of the water. This increases compressive strength and reduces shrinkage and cracking. Advantages of VDF include monolithic, shrinkage-free floors in large panels up to 100 sqm, very high strength, controlled finishes, and high daily output.
Vacuum concrete
1. Vacuum concrete involves mixing concrete with high water content to improve workability, then extracting extra water using vacuum dewatering to reduce the water-cement ratio and improve strength and durability.
2. A series of experiments investigated the effects of various factors on the volume of water extracted and the compressive strength distribution within vacuum concrete slabs. Higher slump, lower strength, thicker slabs, and earlier vacuum treatment resulted in more water extracted.
3. Vacuum treatment improved compressive strengths throughout the slab thickness but particularly at upper layers, reducing the strength gradient. Strengths were highest with later vacuum treatment and lower water-cement ratios.
Industrial flooring
EPA Infrastructure Pvt. Limited provides various types of industrial flooring systems suitable for different applications. The document discusses vacuum dewatered flooring/trimix, PU flooring, PE foam flooring, and epoxy flooring. Vacuum dewatered flooring involves removing excess water from concrete through vacuuming, resulting in stronger, more durable floors. PU and epoxy flooring provide scratch and impact resistance along with long lifespan. PE foam flooring is lightweight and absorbs sound and impact vibrations while being moisture and mold resistant. All of these flooring types deliver strength, durability, and maintenance benefits for industrial settings.
Vacuum concrete
Vacuum concrete adalah beton yang setelah diaduk dan dituang, air sisa reaksinya disedot menggunakan pompa vakum khusus untuk meningkatkan kekuatan beton hingga 25% dan mengurangi permeabilitas serta mempercepat proses finishing dan pelepasan bekisting. Teknik ini memberikan keuntungan berupa peningkatan kualitas dan pengikatan beton. Aplikasinya meliputi lantai industri, tempat parkir, dan dasar jembatan.
Vaccum Dewatered Flooring
We take pleasure to introduce ourselves as the leading Applicator of Industrial Flooring works in India
flooring and its types
about flooring and its types.....
with its sizes and installation process and availability..
and usage.....
Civil Works
Various Construction Civil Works as Back Filling, Construction of columns, PEB erection, roof sheetings, ride on trowel truss screed flooring, groove cutting and fillings, Epoxy flooring, terrace waterproofing and insulation, foam concrete etc.
Vacuum dewatered flooring
This document provides an overview of vacuum dewated flooring (VDF). VDF is a flooring technique that uses vacuum pressure to remove water from freshly laid concrete, resulting in a stronger and harder floor. The document defines VDF, outlines its benefits such as increased strength and wear resistance. It describes the VDF process which involves laying concrete, vibrating it, placing a suction mat to remove water, and finishing the surface. Equipment for VDF including screed vibrators, vacuum pumps, and power floats are also detailed. Advantages like early strength and reduced cracking are contrasted with disadvantages like higher initial costs. Applications of VDF in industrial, transportation, and hydraulic structures are listed. New dewatering
Special Concreting Techniques
This document discusses several special concreting techniques:
- Pumped concrete is concrete that can be pushed through a pipeline and must have a design that prevents blockages.
- Shortcrete or gunite is a mortar or fine concrete pneumatically projected at high velocity, used for thin sections with less formwork.
- Underwater concrete requires special mixes placed via bagging, buckets, tremie pipes, or grouted aggregates to prevent water intrusion.
- Other techniques include pre-packed concrete placed underwater and special considerations for hot/cold weather concreting. Proper mix design and placement methods are essential for successful implementation of special concreting applications.
Floor finish
Manish Jain
Gr. Floor , Ashoka apartment
Bhawani Singh Road
C-scheme , Jaipur -302001
Rajasthan ( INDIA)
Ph. 91-0141-2743536 , 91-9829063132
Email: fdarchitect@gmail.com
Web : www.frontdesk.co.in
Concrete
Concrete is a composite material made by binding aggregates with a cement paste. It comes in various types depending on the binding material (cement or lime) and purpose (plain, reinforced, pre-stressed). Good concrete has strength, durability, density, water tightness, workability and resistance to wear and tear. Proper mixing, placing, compaction and curing are required to develop these qualities in concrete.
Flooring
Flooring refers to any material applied over a floor structure to provide a walking surface. Common flooring materials include carpet, resilient flooring (e.g. vinyl, linoleum), wood, ceramic tile, stone, terrazzo, and seamless chemical coatings. The choice of flooring material depends on factors like cost, durability, noise insulation, comfort, and maintenance requirements. A subfloor provides structural support for the flooring material and may be finished without additional covering. Common flooring types discussed include carpet, wood, resilient, ceramic tile, marble, brick, glass, rubber, and stone flooring.
Slipform
The document discusses slip form construction, a method where concrete is poured into a continuously moving form. There are two main types - vertical forms that move upwards, and horizontal forms that move horizontally. Slip forming allows for continuous, jointless concrete structures and reduces construction time compared to traditional formwork. It requires careful planning of the construction process to achieve high productivity while ensuring safety.
CONSTRUCTION OF CEMENT CONCRETE ROAD
The document provides an overview of public works departments and concrete road construction in India. It discusses that the Public Works Department in Uttar Pradesh pioneered construction and established agencies like the State Bridge Corporation. It also describes the types of pavements used in India, including flexible pavements made of bitumen and rigid concrete pavements. The document outlines the basic process of constructing concrete roads, from site preparation to mixing, placing, and curing concrete before opening the road to traffic.
F10 lec01 overview
The minimum pressure for viscous flow in a 1 inch diameter pipe is approximately 5 Torr.
At 5 Torr, the mean free path is 0.2 cm.
The Knudsen number is then:
Kn = MFP/d
= 0.2 cm / 2.54 cm
= 0.078
Since Kn < 0.01, the flow will be viscous at or below 5 Torr pressure.
Insulation
Insulation, or more correctly thermal insulation, is a general term used to describe products that reduce heat loss or heat gain by providing a barrier between areas that are significantly different in temperature.
Picture Presentaion of Foundation construction
The document outlines the process for constructing site foundations, including:
1) Conducting a soil survey and designing the footing type, placement, depth, and spacing.
2) Installing grid lines and making boxes to mark the excavation areas.
3) Excavating the marked areas using an excavator.
4) Applying rubble soling or a layer of PCC depending on water table conditions.
5) Marking footing centers, installing reinforcement nets in boxes, and pouring concrete according to mix design using a vibrator.
Backfilling 2014a-Lecture4
This lecture discusses backfilling procedures for excavated structures. It defines backfilling as the activity that occurs after excavation to fill the excavated area. The lecture outlines the objectives of learning about backfilling clauses and how to determine which clauses apply. It then provides examples of excavating and backfilling footings and foundations for a simple guard house structure. It emphasizes the need to carefully measure excavation depths and backfill quantities for different areas. Finally, it provides exercises for students to measure backfill quantities for given structural details and footing configurations.
Foundations
The document discusses various types of foundations and foundation systems. It covers shallow foundations like spread footings, mat foundations, and slab on grade foundations. It also discusses deep foundations like piles and caissons used when the soil cannot support shallow foundations. Various aspects that foundations must address are also covered like loads, drainage, reinforcement, and excavation support.
Chapter 3
This document provides information on various metalworking processes including cold working, hot working, rolling, extrusion, casting, and heat treatments. It discusses:
1) Cold working processes like rolling, drawing, and pressing that permanently deform and strengthen metals below the recrystallization temperature.
2) Hot working processes like forging, rolling, and extrusion that deform metals above the recrystallization temperature for easier shaping.
3) The sand casting process which is used to produce small quantities of identical castings through the use of sand molds. Molten metal is poured into a mold cavity and allowed to solidify.
Sub grade preperation
In transport engineering, subgrade is the native material underneath a constructed road, pavement or railway track. It is also called formation level.
The term can also refer to imported material that has been used to build an embankment.
Ventilation Systems
Compared to commercial building, ventilation systems of warehouses are relatively simpler, but a warehouse brings with its own set of challenges as any design or structure would. Ventilation is critical for the warehouses because a lot of products are sensitive to temperature or humidity and dust and no consumer likes to get damaged or defective products.
Company profile
EPA Infrastructure Private Limited was founded by Mr. Paramjit Singh Sahai, an alumnus of IIT Delhi; on April 1, 2003. We are known in the market for working with the customer as our own team, for trust, openness, collaboration and for understanding the needs of the customer.
We provide Project Management Services; Specialised Construction Services; Civil, Structural, Finishing and Interior Works. Our in-house team of civil engineers, planners, and technical specialists is well equipped with the knowledge and expertise to provide a bouquet of professional services.
Corrosion protection
Corrosion is the gradual destruction of materials, (usually metals), by chemical reaction with its environment.
Protect Corrosion. Iron corrosion.
Structural Strengthening
Structural strengthening, restoring and adding capacity is an integral part of today’s concrete repair industry. Structural strengthening may be required for increasing load capacity of beams, columns, walls, and/or slabs, seismic retrofitting, supporting additional live or dead loads not included in original design, to relieve stresses generated by design or construction errors, or to restore original load capacity to damaged structural elements.
Epoxy Coating/ Flooring
Epoxy is an engineering adhesive that bestows the industrial floor with durability, rejuvenates it and amplifies its value. Epoxy Coating can be applied to the existing floors and also the newly paved ones. It gives a fantastic look with increased strength and durability.
Soil Stabilization
Stabilization in a broad sense incorporates the various methods employed for modifying the properties of a soil to improve its engineering performance. Stabilization is being used for a variety of engineering works, the most common application being in the construction of road and airfield pavements, where the main objective is to increase the strength or stability of soil and to reduce the construction cost by making best use of locally available materials.
More Related Content
Viewers also liked
flooring and its types
about flooring and its types.....
with its sizes and installation process and availability..
and usage.....
Civil Works
Various Construction Civil Works as Back Filling, Construction of columns, PEB erection, roof sheetings, ride on trowel truss screed flooring, groove cutting and fillings, Epoxy flooring, terrace waterproofing and insulation, foam concrete etc.
Vacuum dewatered flooring
This document provides an overview of vacuum dewated flooring (VDF). VDF is a flooring technique that uses vacuum pressure to remove water from freshly laid concrete, resulting in a stronger and harder floor. The document defines VDF, outlines its benefits such as increased strength and wear resistance. It describes the VDF process which involves laying concrete, vibrating it, placing a suction mat to remove water, and finishing the surface. Equipment for VDF including screed vibrators, vacuum pumps, and power floats are also detailed. Advantages like early strength and reduced cracking are contrasted with disadvantages like higher initial costs. Applications of VDF in industrial, transportation, and hydraulic structures are listed. New dewatering
Special Concreting Techniques
This document discusses several special concreting techniques:
- Pumped concrete is concrete that can be pushed through a pipeline and must have a design that prevents blockages.
- Shortcrete or gunite is a mortar or fine concrete pneumatically projected at high velocity, used for thin sections with less formwork.
- Underwater concrete requires special mixes placed via bagging, buckets, tremie pipes, or grouted aggregates to prevent water intrusion.
- Other techniques include pre-packed concrete placed underwater and special considerations for hot/cold weather concreting. Proper mix design and placement methods are essential for successful implementation of special concreting applications.
Floor finish
Manish Jain
Gr. Floor , Ashoka apartment
Bhawani Singh Road
C-scheme , Jaipur -302001
Rajasthan ( INDIA)
Ph. 91-0141-2743536 , 91-9829063132
Email: fdarchitect@gmail.com
Web : www.frontdesk.co.in
Concrete
Concrete is a composite material made by binding aggregates with a cement paste. It comes in various types depending on the binding material (cement or lime) and purpose (plain, reinforced, pre-stressed). Good concrete has strength, durability, density, water tightness, workability and resistance to wear and tear. Proper mixing, placing, compaction and curing are required to develop these qualities in concrete.
Flooring
Flooring refers to any material applied over a floor structure to provide a walking surface. Common flooring materials include carpet, resilient flooring (e.g. vinyl, linoleum), wood, ceramic tile, stone, terrazzo, and seamless chemical coatings. The choice of flooring material depends on factors like cost, durability, noise insulation, comfort, and maintenance requirements. A subfloor provides structural support for the flooring material and may be finished without additional covering. Common flooring types discussed include carpet, wood, resilient, ceramic tile, marble, brick, glass, rubber, and stone flooring.
Slipform
The document discusses slip form construction, a method where concrete is poured into a continuously moving form. There are two main types - vertical forms that move upwards, and horizontal forms that move horizontally. Slip forming allows for continuous, jointless concrete structures and reduces construction time compared to traditional formwork. It requires careful planning of the construction process to achieve high productivity while ensuring safety.
CONSTRUCTION OF CEMENT CONCRETE ROAD
The document provides an overview of public works departments and concrete road construction in India. It discusses that the Public Works Department in Uttar Pradesh pioneered construction and established agencies like the State Bridge Corporation. It also describes the types of pavements used in India, including flexible pavements made of bitumen and rigid concrete pavements. The document outlines the basic process of constructing concrete roads, from site preparation to mixing, placing, and curing concrete before opening the road to traffic.
F10 lec01 overview
The minimum pressure for viscous flow in a 1 inch diameter pipe is approximately 5 Torr.
At 5 Torr, the mean free path is 0.2 cm.
The Knudsen number is then:
Kn = MFP/d
= 0.2 cm / 2.54 cm
= 0.078
Since Kn < 0.01, the flow will be viscous at or below 5 Torr pressure.
Insulation
Insulation, or more correctly thermal insulation, is a general term used to describe products that reduce heat loss or heat gain by providing a barrier between areas that are significantly different in temperature.
Picture Presentaion of Foundation construction
The document outlines the process for constructing site foundations, including:
1) Conducting a soil survey and designing the footing type, placement, depth, and spacing.
2) Installing grid lines and making boxes to mark the excavation areas.
3) Excavating the marked areas using an excavator.
4) Applying rubble soling or a layer of PCC depending on water table conditions.
5) Marking footing centers, installing reinforcement nets in boxes, and pouring concrete according to mix design using a vibrator.
Backfilling 2014a-Lecture4
This lecture discusses backfilling procedures for excavated structures. It defines backfilling as the activity that occurs after excavation to fill the excavated area. The lecture outlines the objectives of learning about backfilling clauses and how to determine which clauses apply. It then provides examples of excavating and backfilling footings and foundations for a simple guard house structure. It emphasizes the need to carefully measure excavation depths and backfill quantities for different areas. Finally, it provides exercises for students to measure backfill quantities for given structural details and footing configurations.
Foundations
The document discusses various types of foundations and foundation systems. It covers shallow foundations like spread footings, mat foundations, and slab on grade foundations. It also discusses deep foundations like piles and caissons used when the soil cannot support shallow foundations. Various aspects that foundations must address are also covered like loads, drainage, reinforcement, and excavation support.
Chapter 3
This document provides information on various metalworking processes including cold working, hot working, rolling, extrusion, casting, and heat treatments. It discusses:
1) Cold working processes like rolling, drawing, and pressing that permanently deform and strengthen metals below the recrystallization temperature.
2) Hot working processes like forging, rolling, and extrusion that deform metals above the recrystallization temperature for easier shaping.
3) The sand casting process which is used to produce small quantities of identical castings through the use of sand molds. Molten metal is poured into a mold cavity and allowed to solidify.
Sub grade preperation
In transport engineering, subgrade is the native material underneath a constructed road, pavement or railway track. It is also called formation level.
The term can also refer to imported material that has been used to build an embankment.
Viewers also liked (16)
More from EPA Infrastructure Pvt. Ltd.
Ventilation Systems
Compared to commercial building, ventilation systems of warehouses are relatively simpler, but a warehouse brings with its own set of challenges as any design or structure would. Ventilation is critical for the warehouses because a lot of products are sensitive to temperature or humidity and dust and no consumer likes to get damaged or defective products.
Company profile
EPA Infrastructure Private Limited was founded by Mr. Paramjit Singh Sahai, an alumnus of IIT Delhi; on April 1, 2003. We are known in the market for working with the customer as our own team, for trust, openness, collaboration and for understanding the needs of the customer.
We provide Project Management Services; Specialised Construction Services; Civil, Structural, Finishing and Interior Works. Our in-house team of civil engineers, planners, and technical specialists is well equipped with the knowledge and expertise to provide a bouquet of professional services.
Corrosion protection
Corrosion is the gradual destruction of materials, (usually metals), by chemical reaction with its environment.
Protect Corrosion. Iron corrosion.
Structural Strengthening
Structural strengthening, restoring and adding capacity is an integral part of today’s concrete repair industry. Structural strengthening may be required for increasing load capacity of beams, columns, walls, and/or slabs, seismic retrofitting, supporting additional live or dead loads not included in original design, to relieve stresses generated by design or construction errors, or to restore original load capacity to damaged structural elements.
Epoxy Coating/ Flooring
Epoxy is an engineering adhesive that bestows the industrial floor with durability, rejuvenates it and amplifies its value. Epoxy Coating can be applied to the existing floors and also the newly paved ones. It gives a fantastic look with increased strength and durability.
Soil Stabilization
Stabilization in a broad sense incorporates the various methods employed for modifying the properties of a soil to improve its engineering performance. Stabilization is being used for a variety of engineering works, the most common application being in the construction of road and airfield pavements, where the main objective is to increase the strength or stability of soil and to reduce the construction cost by making best use of locally available materials.
Epa Infrastructure Pvt. Ltd. Company Profile
Specialty Construction works as follows:
1. Vacuum Dewatered Flooring
2. Industrial Floorings like
Ø PE foam floorings
Ø Epoxy floorings
3. Dust proofing of concrete floors with
Ø Impregnation chemicals
Ø Epoxy coatings
4. Waterproofing works for Basements, Sunken, Terrace
Gardens, Terraces, Walls etc using:
Ø Polymer modified cementations membranes
Ø Polyurethane membranes,
Ø Box-type method using Kota/Agra stone
Ø Injection Grouting
Ø APP modified bituminous membranes/ Tar felt
Ø Brickbat Coba
Ø EPDM Membranes
Ø PVC Membranes
5. Insulation of buildings with
Ø Foam concrete
Ø Expanded H.D. polystyrene
Ø Extruded Polystyrene (XPS)
Ø Thermal insulating plaster/ Vermiculite plaster
Ø Closed cell-structure PE sheets
6. Core Cutting
7. Structure Strengthening
8. Interior Works for Residences, Showrooms
9. Minor Civil Works
10. Consultancy for Specialized Civil Works
11. Trading of Construction Chemicals
12. Project Management Services
13. Road Work (RCC, SMC, PCC)
14. Expansion Joint Work
Waterproofing
It is essential to waterproof a structure to prevent the seepage of water for its durability. We provide water proofing solutions for basements, sunken portions, roofs, terrace gardens and expansion joints etc. We deal with several ways of water proofing depending on a structure, site and conditions viz.:
Polymer Modified Cementitious Membranes
Polyurethane Membranes
Box Type Method using Kota/Agra Stone
Injection Grouting
APP modified bituminous membranes / Trafelt
EPD Membrane
PVC Membrane
Injection grouting
This document provides information about a low viscosity, hydro-swilling, thermosetting resin for crack injection. It lists the company contact information and provides instructions for mixing the resin components, grouting with injection equipment, and pre-processing including cleaning the area and fixing injection nipples before crack treatment.
Structural coatings
EPA Infrastructure Pvt. Limited provides different types of structural coatings including anti-corrosive coatings and heat and chemical resistant coatings. Anti-corrosive coatings protect metal surfaces from corrosion in hazardous environments through the use of paints and chemical treatments. Heat and chemical resistant coatings are necessary for structures exposed to heat and chemicals, such as in industrial plants, and protect against threats to increase durability. EPA Infrastructure offers various membranes and chemical reagents for heat and chemical resistant coating applications.
Microfine cement
Soil Consolidation, Ground and Rock Stabilization, Soil and Rock Injection, Structural Under Pinning, Void Filling, Fissure Grouting
Cut-Off Curtain Walls
More from EPA Infrastructure Pvt. Ltd. (11)
Recently uploaded
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
CAKE: Sharing Slices of Confidential Data on Blockchain
Presented at the CAiSE 2024 Forum, Intelligent Information Systems, June 6th, Limassol, Cyprus.
Synopsis: Cooperative information systems typically involve various entities in a collaborative process within a distributed environment. Blockchain technology offers a mechanism for automating such processes, even when only partial trust exists among participants. The data stored on the blockchain is replicated across all nodes in the network, ensuring accessibility to all participants. While this aspect facilitates traceability, integrity, and persistence, it poses challenges for adopting public blockchains in enterprise settings due to confidentiality issues. In this paper, we present a software tool named Control Access via Key Encryption (CAKE), designed to ensure data confidentiality in scenarios involving public blockchains. After outlining its core components and functionalities, we showcase the application of CAKE in the context of a real-world cyber-security project within the logistics domain.
Paper: https://doi.org/10.1007/978-3-031-61000-4_16
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Recently uploaded (20)
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
CAKE: Sharing Slices of Confidential Data on Blockchain
CAKE: Sharing Slices of Confidential Data on Blockchain
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
VDF (Vaccum Dewatered Flooring) & back filling
- 1. EPA INFRASTRUCTURE PVT LTD Back Filling and Area Filling B-267/268, North Ex Mall, Sector 9, Rohini, New Delhi - 110085 Tel No: +91-11-47068151/52/56 Email: info@epa-infrastructure.com
- 2. COLUMN FILLING COLUMN FILLING USING SANDY SOIL IS THE FIRST THING TO START THE WORK WITH AT A WORK SITE. BEFORE PUTTING THE SOIL, MAKE SURE THAT THE LOSE PARTIALS ARE REMOVED FROM THE COLUMN FOOTING AND GROUND IS CLEAR TO START THE WORK.
- 3. ARRANGE IMPORTED EARTH AND GET THE SOIL TEST(CBR VALUE, PROCTOR DRY DENSITY TEST & ETC) BY SOIL TESTING AGENCY Imported Sandy Soil
- 4. MARK THE FOOTING OF THE COLUMN WITH A MARKER/PAINT STREAK AT EVERY 9 INCHES TILL FOOTING LEVEL.
- 5. NOW PLACE 9 INCHES OF LOOSE LAYER OF SANDY SOIL IN THE PIT AND WATER THE SOIL TO OPTIMUM MOISTURE CONTENT (OMC), RUN THE SOIL COMPACTOR AROUND THE COLUMN. SOIL WILL GET COMPACTED TO APPROX 6 INCH LAYER.
- 6. REACH UP TO THE FOOTING LEVEL OF THE COLUMN FOLLOWING THE SAME PROCEDURE
- 8. AGAIN PUT SANDY SOIL UP TO THE MARK AROUND THE COLUMN AND FOLLOW THE SAME PROCEDURE AND REACH UP TO THE GROUND LEVEL.
- 9. WITH THE HELP OF JCB & LEVELER SPREAD 8 INCHES OF SOIL ALL OVER THE AREA.
- 10. ARRANGE FOR THE A WATER TANKER AND SPREAD WATER ALL OVER THE SITE AS ADVISED BY THE SOIL CONSULTANT.
- 11. USE A VIBRO ROLLER AND START THE ROLLING PROCEDURE ON THE IMPORTED EARTH. REACH TO REQUIRED LEVEL IN 6 INCH LAYERS.
- 12. THANK YOU