Practical Control Valve Sizing, Selection and MaintenanceLiving Online
THE WORKSHOP
It is claimed that the majority of control valves throughout the world have not been correctly sized and that large numbers operate on manual mode. Whether this is true or not is difficult to establish but we do know that the method of sizing and selecting a control valve for a specific application is generally not well understood. Although there are many factors that need to be taken into account the subject is not difficult to understand if dealt with in a logical manner.
Many maintenance problems result from people treating the symptoms of a problem rather than tackling the true cause – a basic understanding of the principles is all that is usually needed to solve the problem for good. This practical, hands-on workshop is designed to maximise knowledge retention and understanding. It provides an opportunity for participants to discuss with the presenter and others, specific problems and appropriate solutions. All delegates take away a detailed and comprehensive copy of the material presented; therefore minimal note taking is encouraged to ensure maximum delegate participation and attention.
WHO SHOULD ATTEND?
Consulting engineers
Control valve specialists
Electrical engineers
Instrumentation and control engineers and technicians
Maintenance engineers, technicians and planners
Plant safety specialists
Process control engineers
Project engineers
Systems engineers
www.idc-online.com/content/practical-control-valve-sizing-selection-and-maintenance-52?id=6897
Industrial Water Treatment Training for Technicians & Service Engineerscheapcarkeysscotland
1 day industrial water treatment training course for in-field Technicians & service engineers. Covers boilers, cooling & closed system water treatment.
https://watertreatmentservices.co.uk/water/industrial-water-treatment-training/
Geo Therm Ltd q & a write up in the oil & gas innovation magazine - summer ...Tony Dale
Company director Tony Dale provides on inciteful look in to Geo Therm Ltd's offshore activities via questions posed from the team behind this summers edition of the Oil & Gas Innovation magazine, (Pages: front cover, 6, 34-35 and back cover only)
Practical Control Valve Sizing, Selection and MaintenanceLiving Online
THE WORKSHOP
It is claimed that the majority of control valves throughout the world have not been correctly sized and that large numbers operate on manual mode. Whether this is true or not is difficult to establish but we do know that the method of sizing and selecting a control valve for a specific application is generally not well understood. Although there are many factors that need to be taken into account the subject is not difficult to understand if dealt with in a logical manner.
Many maintenance problems result from people treating the symptoms of a problem rather than tackling the true cause – a basic understanding of the principles is all that is usually needed to solve the problem for good. This practical, hands-on workshop is designed to maximise knowledge retention and understanding. It provides an opportunity for participants to discuss with the presenter and others, specific problems and appropriate solutions. All delegates take away a detailed and comprehensive copy of the material presented; therefore minimal note taking is encouraged to ensure maximum delegate participation and attention.
WHO SHOULD ATTEND?
Consulting engineers
Control valve specialists
Electrical engineers
Instrumentation and control engineers and technicians
Maintenance engineers, technicians and planners
Plant safety specialists
Process control engineers
Project engineers
Systems engineers
www.idc-online.com/content/practical-control-valve-sizing-selection-and-maintenance-52?id=6897
Industrial Water Treatment Training for Technicians & Service Engineerscheapcarkeysscotland
1 day industrial water treatment training course for in-field Technicians & service engineers. Covers boilers, cooling & closed system water treatment.
https://watertreatmentservices.co.uk/water/industrial-water-treatment-training/
Geo Therm Ltd q & a write up in the oil & gas innovation magazine - summer ...Tony Dale
Company director Tony Dale provides on inciteful look in to Geo Therm Ltd's offshore activities via questions posed from the team behind this summers edition of the Oil & Gas Innovation magazine, (Pages: front cover, 6, 34-35 and back cover only)
We are one of the eminent organizations engaged in manufacturing, supplying and exporting a comprehensive array of Electronic Testing and Measuring Instruments. Our range finds wide application in electronic and heavy duty engineering industries.
The 2020 GeoTherm main company brochure showing the current inspection and services for our onshore industry and maritime services, used thoughout the world to minimise risks associated with power outages, fire and water integrity issues. Keeping businesses and vessels in operation, regardless of their location.
Geo Therm company profile booklet providing a basic overview on the company, its formation, personnel and services sectors to aid existing maintenance regimes, condition monitoring for industry offshore, maritime and energy sector compliance needs.
Industrial Water Management provides a wide range of technical solutions suited to industrial specific needs : water treatment products, associated services, equipment...
This practical workshop covers all the essentials of process control and tools to optimise the operation of your plant and process, including the ability to perform effective loop tuning.
Practical process control is aimed at engineers and technicians who wish to have a clear, practical understanding of the essentials of process control and loop tuning, as well as how to optimise the operation of their particular plant or process. These persons would typically be primarily involved in the design, implementation and upgrading of industrial control systems. Mathematical theory has been kept to a minimum with the emphasis throughout on practical applications and useful information.
WHO SHOULD ATTEND?
Automation engineers
Building service designers
Consulting engineers
Control engineers
Control technicians
DCS personnel
Electrical engineers and technicians
Electricians
Energy management consultants
Instrumentation engineers
Instrumentation technicians
Maintenance engineers
Process engineers
Process operators
www.idc-online.com/content/practical-process-control-81?id=6950
Fundamentals of Instrumentation, Process Control, PLCs and SCADA for Plant Op...Living Online
THE WORKSHOP:
This course represents a tremendous opportunity to gain expertise in all the key areas of the fast growing area of industrial automation in two days. Presented by an expert in the area but who is passionate with getting the key chunks of know-how and expertise across to you in a simple understandable manner which you can immediately apply to your job. This is most definitely not a boring lecture style presentation but an intensive learning experience where you will walk away with real skills as a result of the hands-on practical exercises, calculations, case studies and group sessions to ensure an understanding of the concepts and ideas discussed. You will undertake practical sessions at approximately 20 to 30 minute intervals to maximise the absorption rate.
C++ is a general purpose programming language that is an extension of C language. It shares some of the syntax and structure elements with its predecessor and couple of its own elements of object oriented programming
We are one of the eminent organizations engaged in manufacturing, supplying and exporting a comprehensive array of Electronic Testing and Measuring Instruments. Our range finds wide application in electronic and heavy duty engineering industries.
The 2020 GeoTherm main company brochure showing the current inspection and services for our onshore industry and maritime services, used thoughout the world to minimise risks associated with power outages, fire and water integrity issues. Keeping businesses and vessels in operation, regardless of their location.
Geo Therm company profile booklet providing a basic overview on the company, its formation, personnel and services sectors to aid existing maintenance regimes, condition monitoring for industry offshore, maritime and energy sector compliance needs.
Industrial Water Management provides a wide range of technical solutions suited to industrial specific needs : water treatment products, associated services, equipment...
This practical workshop covers all the essentials of process control and tools to optimise the operation of your plant and process, including the ability to perform effective loop tuning.
Practical process control is aimed at engineers and technicians who wish to have a clear, practical understanding of the essentials of process control and loop tuning, as well as how to optimise the operation of their particular plant or process. These persons would typically be primarily involved in the design, implementation and upgrading of industrial control systems. Mathematical theory has been kept to a minimum with the emphasis throughout on practical applications and useful information.
WHO SHOULD ATTEND?
Automation engineers
Building service designers
Consulting engineers
Control engineers
Control technicians
DCS personnel
Electrical engineers and technicians
Electricians
Energy management consultants
Instrumentation engineers
Instrumentation technicians
Maintenance engineers
Process engineers
Process operators
www.idc-online.com/content/practical-process-control-81?id=6950
Fundamentals of Instrumentation, Process Control, PLCs and SCADA for Plant Op...Living Online
THE WORKSHOP:
This course represents a tremendous opportunity to gain expertise in all the key areas of the fast growing area of industrial automation in two days. Presented by an expert in the area but who is passionate with getting the key chunks of know-how and expertise across to you in a simple understandable manner which you can immediately apply to your job. This is most definitely not a boring lecture style presentation but an intensive learning experience where you will walk away with real skills as a result of the hands-on practical exercises, calculations, case studies and group sessions to ensure an understanding of the concepts and ideas discussed. You will undertake practical sessions at approximately 20 to 30 minute intervals to maximise the absorption rate.
C++ is a general purpose programming language that is an extension of C language. It shares some of the syntax and structure elements with its predecessor and couple of its own elements of object oriented programming
This Powerpoint presentation covers following topics of C Plus Plus:
Features of OOP
Classes in C++
Objects & Creating the Objects
Constructors & Destructors
Friend Functions & Classes
Static data members & functions
Valve and instrumentation calibration and maintenance will assures the accuracy of your industrial instrumentation and valves in accordance with relevant standards
All valves require proper care and maintenance,as does other more complex equipment, to ensure theyare kept in optimum working order. The principledifficulties encountered with valves are leakage pastthe seat and disk, leakage at the stuffing box, stickingvalve stems, and loose valve disks.
Technisys Engineering Pvt. Ltd. is well growing Best Automation Company Delhi NCR & India’s first company which is largest partner of Honeywell. Technisys have more than 400 Indian clients and 24 International clients. Technisys have one another department known as TISDA (Technical International skill development Academy) in which we provide 6 Week / Month Automation Training (summer, winter, industrial) in PLC, SCADA, HMI, DCS, DRIVE, INSTRUMENTATION, Panel Designing and more.
Technisys Engineering Pvt. Ltd. is well growing Best Automation Company Delhi NCR & India’s first company which is largest partner of Honeywell. Technisys have more than 400 Indian clients and 24 International clients. We have one another department known as TISDA (Technical International skill development Academy) in which we provide 6 Week / Month Automation Training (summer, winter, industrial) in PLC, SCADA, HMI, DCS, DRIVE, INSTRUMENTATION, Panel Designing and more.
Website - www.technisys.co.in
Email - training@technisys.org
Phone - +91 9289222808
OCS Training - Reliability Centered Maintenance - 5 Days CourseMuanisa Waras
Advance your career with join our preparation Maintenance Training Schedule 2019 as below:
“Course Name: Condition Based Monitoring & Maintenance (5 Days Course)” Bangkok, Thailand : March 18th – 22nd 2019"
“Reliability Centered Maintenance (5 Days Course)” Kuala Lumpur Malaysia : March 25th – 29th 2019
For more information on how to enroll contact us at muanisa@ocsgroup.com or phone at +6221 2555 5772 / +6281617851607
#training #condition #reliability #vessel #preparationcourse #inform #howto #masterclass #bestcourse #profesional #maintenancetraining #monitoring #downstream
Practical Safety Instrumentation & Emergency Shutdown Systems for Process Ind...Living Online
COPY THIS LINK INTO YOUR BROWSER FOR MORE INFORMATION: bit.ly/1Htp9ZC
For project managers and engineers involved with hazardous processes, this workshop focuses on the management, planning and execution of automatic safety systems in accordance with IEC 61511, the newly released international standard for process industry safety controls.
IEC 61511 has been recognised by European safety authorities and by USA based process companies as representing the best practices available for the provision of automatic safety systems. The new standard captures many of the well established project and design techniques that have been described since 1996 in ANSI/ISA standard S84 whilst introducing many newer principles based on the master standard IEC 615108. The newly released standard IEC 61511 (published in 3 parts) combines the principles of IEC 61508 and S84 into a practical and easily understood code of practice specifically for end users in the process industries.
This workshop is structured into two major parts to ensure that both managers and engineering staff are trained in the fundamentals of safety system practices. The first part of the workshop, approx the first third, provides an overview of the critical issues involved in managing and implementing safety systems.
WHO SHOULD ATTEND?
Automation/machinery design engineers
Control systems engineers
Chemical or energy process engineers
Instrument/electrical engineers and technicians
Instrument suppliers technical staff
Maintenance supervisors
Project engineers and project managers
COPY THIS LINK INTO YOUR BROWSER FOR MORE INFORMATION: bit.ly/1Htp9ZC
In diesem Vortrag auf dem Vortrag auf dem YAVEON Kundentag 2014 stellt Rainer Elvermann, Geschäftsführer cbprocess GmbH & Co. KG, das "context based process management" vor. Anhand konkreter Beispiele aus komplexen Branchen (Luft- & Raumfahrt, Automotive, Forschungsschiffe, Bauwesen) spricht Herr Elvermann über aktuelle Erfahrungen mit Business Process Management im allgemeinen und dem verwendeten Tool, process4.biz, im besonderen.
Proudly to present our New Schedule for Virtual training about:
“Rig Equipment Inspection – Advanced (IADC ADVANCED CERTIFICATION)”
Date :
1. 17th - 24th January 2022
https://bit.ly/36ILVyP
To get more information, please contact us at sales@ocsgroup.com
Introduction to Software Engineering and Software Process Modelssantoshkawade5
S/W Engineering
Software Engineering Fundamentals: Introduction to software engineering, The Nature of Software, Defining Software, Software Engineering Practice.
A Generic Process Model, defining a Framework Activity, Identifying a Task Set, Process Patterns, Process Assessment and Improvement, Prescriptive Process Models, The Waterfall Model, Incremental Process Models, Evolutionary Process Models, Concurrent Models, A Final Word on Evolutionary Processes. Unified Process, Agile software development: Agile methods, plan driven and agile development.
Fedegari Training & Education Calendar 2016Fedegari Group
Fedegari Training & Education Calendar 2016 offer
programs that have been designed specifically to share experiences and allow our customers to develop a much deeper understanding of technologies and products in sterile processing and contamination control.
Practical Tuning of Industrial Control LoopsLiving Online
This workshop is designed to train you and/or your staff, in the configuration and tuning of industrial
control loops with minimal use of mathematics and formulae. Controllers need to be carefully
matched to the process to work optimally; this matching procedure is called tuning. Controllers that
are not correctly configured and tuned will not perform optimally and will not reduce variability in the
process as they should.
The aim of this workshop is to provide and/or enhance the skills required to configure and tune a
controller for optimum operation. An optimally tuned processed loop is critical for a wide variety of
industries ranging from food processing, chemical manufacturing, oil refineries, pulp and paper mills,
mines and steel mills. Although tuning rules are designed to give reasonably tight control, this may
not always be the objective. Some thought needs to be given when retuning a loop as to whether the
additional effort is justified as there may be other issues which are the cause of the poor control.
These issues will be discussed in some detail in the workshop. At the end of this workshop you will
have the skills to troubleshoot and tune a wide variety of process loops.
www.idc-online.com/view-schedule-workshops
THE WORKSHOP:
This practical workshop covers all the essentials of process control and tools to optimise the operation of your plant and process, including the ability to perform effective loop tuning.
Practical process control is aimed at engineers and technicians who wish to have a clear, practical understanding of the essentials of process control and loop tuning, as well as how to optimise the operation of their particular plant or process. These persons would typically be primarily involved in the design, implementation and upgrading of industrial control systems. Mathematical theory has been kept to a minimum with the emphasis throughout on practical applications and useful information.
complete information of SDLC modal and all steps and process we have to follow during the software development and information about waterfall model etc.
1. live, interaCtive classes over the internet
professi onal certifica te of c ompetency in
Control Valve Sizing,
Selection and
Maintenance
12 M odu les over 3 months
For upcoming commencement dates, please view our course schedule at:
http://www.eit.edu.au/schedule
what you will lear n
• Understand what happens inside a control valve from a basic fluid mechanics
point of view
• Appreciate the difference between cavitation and flashing
• Understand the difference between controlled and choked flow
• Do simple calculations to determine CV values
• Recognise severe service applications and have an appreciation for the methods of tackling the
problems associated with such applications
• Identify the different types of control valves commonly in use
and understand the relative advantages of each
• Choose between different characteristics on offer
• Understand the advantages and disadvantages of
Presented by
different seat leakage rates
• Size actuators for linear and rotary applications
Robert
and know the relative advantages of pneumatic,
hydraulic and electric types
Snaith
• Select materials for bodies, trims, packing boxes,
HND (Mech.Eng)
and gaskets
• Use a computer sizing program to assist with the
selection of control valves
• Understand the failure modes for control valves and demonstrate new approaches to trouble
shooting
EN ROL NOW : Fax the enrolment form to us,
or email enquiries@eit.edu.au
2. presented by
Robert Snai th
HND (Mech.Eng)
With over 30 years of experience in fluid transport systems, Rob has
done the hard yards. Commencing work immediately in Fluid System
Applications Engineering after graduating, he expanded his focus in later
years to the plant management of the manufacture of fluid sealing and
transport equipment. In the past decade as a private consultant, he has
worked extensively in designing and troubleshooting complex fluid
transport systems and equipment.
When not working long hours on the design, commissioning and troubleshooting of pumps and
pipelines, Rob squeezes some time in for his Harley Davidson motorbike and scuba diving
expeditions. He has done many presentations and workshops throughout the world and was placed
third in the world in an international pumps, "Train the Trainer" workshop in Boston, Massachusetts
in 1998.
One of his passions and sources of enjoyment is in instructing technical courses. No matter whether
you have very little knowledge or are a veritable guru; you will be sure to take away useful
knowledge from his courses, which you can immediately apply to your business.
BENE FITS OF LIVE
E-LE ARNING
• Attend lessons in an online classroom with
your instructor and fellow students
• Upgrade your skills and refresh your
knowledge without having to take valuable
time away from work
• Receive information and materials in small,
easy to digest sections
• Learn while you travel - all you need is an
Internet connection
• Have constant support from your course
instructor and coordinator for the duration of
the course
• Interact and network with participants from
around the globe and gain valuable insight
into international practice
• Learn from international industry experts,
based around the globe
• Live interactive webinars, not just a ‘book on
the web’
• Receive a certificate of completion for
CPD purposes
Pr esentation format
The certificate program features real-world
applications and uses a multi-pronged approach
involving self-study, interactive online webinars
and homework assignments with a mentor on call.
The course consists of 12 modules, over a period
of 3 months.
Some modules may involve a practical component
or group activity. For each module there will be an
initial reading assignment along with coursework
or problems to be handed in and practical
exercises in some cases. Participants will have
ongoing support from their instructor and course
coordinator.
Course reading material will be delivered in
electronic (PDF) format in advance of online
presentations. Presentations and group
discussions will be conducted using a live
interactive software system. Assignments will be
submitted electronically and wherever possible,
practical exercises will be conducted using
simulation software and remote labs.
liv e webinars
During the program you will participate in 6 live
interactive sessions with the instructor and other
participants from around the world. Each webinar
will last approximately 60 to 90 minutes, and we
take student availability into consideration
wherever possible before scheduling webinar
times. Contact us for details of webinar session
scheduling. All you need to participate is an
adequate Internet connection, speakers and a
microphone. The software package and setup
details will be sent to you prior to the course.
12 modu les over 3 months
overvi ew:
Control valves are the workhorse of our facilities, continually functioning to ensure our systems work as
intended. A properly specified, engineered, designed, installed, and maintained control valve can be one of
the most profitable investments a facility can have, while a control valve that "does not work well" can be an
increased risk of injury (more exposure of maintenance personnel working on the valve), and disruption to
your system.
With today's focus on data management, the control valve is the part of the control loop that not only
requires integration with modern data collection methods, but also involves mechanical features (moving
parts, exposure to process fluids, material selection issues) as well as occupational health and safety
issues not associated with other parts of the control loop (such as noise). Often the benefits of modern
SCADA systems can be lost with inappropriate or minimal attention to the control valves.
This comprehensive certificate course covers the essentials of control valves and actuators. With this
knowledge, the user is better placed to fully realize the full potential and benefit of any control system.
Selections of case studies are used to illustrate the key concepts with examples of real world working
control valves. The course is aimed at those who want to get a solid appreciation of the fundamentals of
their control valve design, installation and troubleshooting.
Includ es 4 fr ee
Reference Ma nua ls
valued a t over US$400
You will receiv e 4 of our u p-to-da te
technica l e-Books to add to your librar y.
• Practical Control Valve Sizing, Selection
and Maintenance
• Practical Instrumentation for Automation and Process Control
• Practical Process Control
• Best Practice in Process, Electrical and Instrumentation
Drawings and Documentation
Over 1400 pages of tables,
charts, figures and handy hints
Received upon completion.
All materials required for the course will be provided electronically, in smaller, easy-to-read sections.
Please Note: e-Books are available in hard copy at 50% of the recommended retail price. Contact us for pricing details.
3. HARDWARE
and SOFTWARE
REQUIREMENT S
All you need to participate is an adequate Internet
connection, PC, speakers and a microphone. The
software package and setup details will be sent to
on the course commencement date.
Entra nce
Requir ements
Some practical work experience in some of these
topics would obviously be advantageous.
PRACTICAL E XERCISES
Throughout the course you will participate in hands-on
exercises using simulation software, which will
help you put theory to practice immediately!
cours e outline
certifica tion
Participants completing all the
assignments and achieving 60% or more
for their final mark, as well as attending
65% of the live webinars, will receive the
Engineering Institute of Technology
Professional Certificate of Competency in
Control Valve Sizing, Selection and
Maintenance.
Control Valve Sizing, Selection a nd Mai ntenance
modu le 7: CAVITATION AND FLASHING
• Difference between cavitation and
flashing
• Managing cavitation
modu le 8: NOISE PREDICTION AND
TREATMENT
• Mechanical vibration
• Hydrodynamic noise
• Aerodynamic noise
modu le 9: MATERIALS OF
CONSTRUCTION
• Typical materials of construction for body
and valve trim
• Recognise issues of corrosion and wear
modu le 10: MAINTENANCE ISSUES
• Understand the tasks involved in valve
maintenance
• Develop your knowledge of important
installation features relevant to good
maintenance
• Know about methods for detection of
backlash and stiction in the valve drive
modu le 11 & 12: PRINCIPLES OF
PRESSURE RELIEF DEVICES AND
PRESSURE RELIEVING SYSTEMS
• Pressure relieving systems as an
independent layer of protection
• The risk reduction complemented by a
functional safety system
• The risk reduction provided by hazardous
area protections systems
• Fire and Gas detection
modu le 1: Introduction
• Basic concepts
• Definitions
modu le 2: TYPES OF CONTROL VALVES
• Linear vs rotary
• Discussion of linear valves (globe valves, angle
valves, etc)
• Discussion of rotary valves (butterfly valves,
ball valves, etc)
• Discussion of seats and leakage
modu le 3: BASIC SIZING FOR LIQUIDS
• Basic selection steps
• Key equations
• Interactive use of sizing software
modu le 4: BASIC SIZING FOR GASES AND
VAPOURS
• Basic selection steps
• Key equations
• Interactive use of sizing software
modu le 5: INHERENT AND INSTALLED
FLOW CHARACTERISTICS
• Discussion of how the control valve
interacts with the system
modu le 6: ACTUATORS
• Principles of actuators for control valves
• Pneumatic actuator types
ON -si te trai ning
We can provide our training at the venue of your
choice. On-site training can be customised and
by bringing the trainer to site the dates can be
set to suit you!
“The Customer is Always Right” – so tell us what
you need and we will design a training solution
at your own site.
For a FREE detailed proposal please
contact Kevin Baker via e-mail:
training@idc-online.com