"Moisture meters manufacturer, moisture meter suppliers, moisture meter manufacturer India, moisture meter exporters, moisture meters India, moisture meters, digital moisture meters, moisture meters supplier India, moister meter, moister meters India, digital moister meter suppliers. For More Information Please Logon http://goo.gl/wiqMCh
Structural Health Monitoring - Real Time Stress MeasurementFrank-Michael Jäger
With the new procedure for the permanent monitoring by the acousto-elastical stress measurement changes in the structures can be recognized in time into civil engineerings. The world-wide only on-line procedure permits the measurement of loads and stress situations directly in the building. With ultrasonic the stress in the building directly and in real time is seized. All changes can be transferred immediately on-line by Internet or radio. The sensors are brought either directly into the building or later attached to endangered places. Design features such as carriers or bridge bearings can be supervised particularly simply. The sensors are constantly at or active in the building. The simple structure and the small size permit comprehensive application at all buildings from steel or concrete. Into all engineering structures can be measured static loads and tensions and small dynamic changes. In the procedure many important civil engineerings could be supervised world-wide. The costs of such a monitoring are small. The collapse of buildings accompanies with a measurable change of the tensions and loads. These are correlated with the world-wide available stove data of seismic events and examined for plausibility. Thus also a monitoring of buildings of all kinds on damage is possible by disasters (earthquake, ground slips, mudslide etc.).
Weiber’s Infrared Moisture Tester is a new moisture testing meter, which infrared radiation which helps researchers, scientists, farmers, and general field applications to measure moisture levels.
Industrial temperature calibrators workload matrix. See which industrial temperature calibrator matches your workload requirements. Brought to you by Fluke Calibration.
"Moisture meters manufacturer, moisture meter suppliers, moisture meter manufacturer India, moisture meter exporters, moisture meters India, moisture meters, digital moisture meters, moisture meters supplier India, moister meter, moister meters India, digital moister meter suppliers. For More Information Please Logon http://goo.gl/wiqMCh
Structural Health Monitoring - Real Time Stress MeasurementFrank-Michael Jäger
With the new procedure for the permanent monitoring by the acousto-elastical stress measurement changes in the structures can be recognized in time into civil engineerings. The world-wide only on-line procedure permits the measurement of loads and stress situations directly in the building. With ultrasonic the stress in the building directly and in real time is seized. All changes can be transferred immediately on-line by Internet or radio. The sensors are brought either directly into the building or later attached to endangered places. Design features such as carriers or bridge bearings can be supervised particularly simply. The sensors are constantly at or active in the building. The simple structure and the small size permit comprehensive application at all buildings from steel or concrete. Into all engineering structures can be measured static loads and tensions and small dynamic changes. In the procedure many important civil engineerings could be supervised world-wide. The costs of such a monitoring are small. The collapse of buildings accompanies with a measurable change of the tensions and loads. These are correlated with the world-wide available stove data of seismic events and examined for plausibility. Thus also a monitoring of buildings of all kinds on damage is possible by disasters (earthquake, ground slips, mudslide etc.).
Weiber’s Infrared Moisture Tester is a new moisture testing meter, which infrared radiation which helps researchers, scientists, farmers, and general field applications to measure moisture levels.
Industrial temperature calibrators workload matrix. See which industrial temperature calibrator matches your workload requirements. Brought to you by Fluke Calibration.
FlowJam -
Material flow monitoring
Microwave detector for contactless monitoring
of material flows for "flow" or "no flow"
Absolutely insensitive against material deposits
For any line diameter
With adapter, usable up to 220 °C and 20 bar
With ceramic mounting, usable up to 1,000 °C
Compact (no separate electronics)
Signalling through relay switching
Different sensitivity levels
Detection through all non-conductive walls
Can also be supplied with short housing and separate electronics
Detection of material clogging and material standstill
The FlowJam detects solid flows of all types for material movement.
A differentiation is made between the following switching states:
- Material flow
- Material clogging / standstill or empty pipe
The system operates with no contact, using microwaves in a process in which the material movement is detected by using the Doppler effect.
The FlowJam is an especially process-secure device, since the microwave can penetrate material coating on the sensor and reliably detect the material movement behind it. If container walls, housings or pipelines are not metal, it is possible to measure from the outside.
The FlowJam can also be used under difficult conditions such as high operating temperatures and pressures with the help of a process adapter.
The FlowJam can be easily installed in the following ways:
Figure 1: Screwing into a G 1½"-inch-threaded connection
Figure 2: Using a DN 40 flange
Figure 3: Using a pipe clamp or other holding brackets
Weiber Computer Control Vibrating Test Chambers offer rapid temperature change rates with
combined temperature, humidity, and or vibration environments. All models are designed for
compatibility with your choice of electrodynamic or mechanical vibration systems.
In-Situ Calibration: Methods & Pitfalls of Thermal Mass Flow Meter Sensor Fie...Sierra Instruments
A unique and highly marketed benefit of thermal mass flow meter technology is “in-situ” or “in place” flow meter calibration. This certainly sounds like an alluring proposition to save time and money by avoiding the expense of returning the instrument to the factory for annual recalibration and recertification. But, not all methods of in-situ calibration validation are created equal!
In this white paper, Sierra Instruments examines five common methods of thermal mass flow meter in-situ calibration validation to help you make an informed decision for your business.
How to measure solids flow? Mass flow of Bulk Solids?Tiago Morais
How to measure mass flow of grain, bulk solids, cement, chemical products, coal, salt, Stone Powder, alumina, wood dust, malt, iron sulfate, coal dust, clinker dust, soot powder, fertilier, minerals, corn flour, gypsum, limestone, lime, active carbon, silicon powder, silica, sugar and much more...
Look for Envea's MaxxFlow, SolidFlow, FlowJam, DensFlow, PicoFlow.
Datasheet Fluke Intrinsically Safe Multifunction Process Calibrator. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Industrial Temperature Calibration Selection Guide by Fluke CalibrationFluke Calibration
The Industrial Temperature Calibration Selection Guide includes information on:
Field metrology wells
Infrared calibrators
Handheld and field dry-wells
Micro-baths
Environmental monitoring
Thermometer readouts
Reference sensors Industrial temperature calibration selection guide Tools
Coulometric Sulfur Analyzer is designed based on the principle of dynamic coulometric analysis. By measuring the charge consumed in the titration process, we can calculate the sulfur content according to Faraday law. The whole process, data processing, data displaying and data printing are real-timely controlled by the single-chip microcomputer. This instrument is an ideal tool for analysis of any materials such as Coal, Coke, Oil, Cement, Catalysts, Mineral Ores, Soils, Plants and many more, all your sulfur analysis needs are available from the superb range of sulfur analyzer produced by Jiangfen. For More Information Please Logon http://goo.gl/fuAGTc
How to Calibrate an RTD Using a Dry Block Calibrator v2Transcat
Transcat and Ron Ainsworth of Fluke Calibration detail the steps and considerations necessary for the calibration of an RTD with a Dry Block Calibrator.
Datasheet Fluke Field Metrology Well. Datasheet Fluke 9142. Datasheet Fluke 9143. Datasheet Fluke 9144. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Fluke Calibration on How to Calibrate an RTD Using a Dry block Calibrator Web...Transcat
What is covered:
1. Dry-block sources of error
2. Calculating uncertainties
3. How to calibrate probes with odd shapes and sizes
4. Temperature range concerns
5. Liquid-in-glass thermometers
6. RTD calibration example
7. Dry-block maintenance
QinetiQ help aircraft fly more safely and for longer by assuring the safe, efficient and cost-effective delivery of airborne capability. For more information @ http://www.qinetiq.com/services-products/air/Pages/through-life-aircraft-support.aspx
Dynamic simulation is a powerful technique for the study of batch processes. It can be used in design development, design validation, process optimisation and problem analysis.
The presentation link reviews the various configurations used to control stirred tank reactors. It also discusses the application of heat transfer oils for the heating and cooling of reactors.”
Anaerobic Inert ovens are equipment’s that are specially designed for anaerobic heat treatment or temperature characteristics testing along with non-oxidising gas such as carbon dioxide or nitrogen in hermetically saved ovens.For More Information Please Logon http://goo.gl/4EqHJz
In the last years, one of the important human challenge is the measuring and monitoring of indoor/outdoor air quality .
Regarding outdoor air quality control especially in crowded and industrial cities , measuring and monitoring of air quality parameters can assist respective organization to conclude useful rules which can help to air pollution control and human health.
Nowadays society rules and conditions caused that people be together in closed indoor environments like office, museum, cinema and… So control of indoor air quality is as important as outdoor air quality control.
We provide perfect and full range of instruments to measure indoor/outdoor air quality.
To get more information about your requirements don’t hesitate to contact our experts.
GE Webinar: Oxygen Measurement for Chemical & Fuel Storage SafetyTranscat
This webinar will explore:
-The parameters needed for an explosion or fire to occur
-Identifying "Lower Explosive Limit"
-Measuring oxygen concentration using Thermoparamagnetic Oxygen sensors
-Application considerations and case studies
Weiber Technical Solutions launches Coffee
Moisture Meters that incorporates a range of design
refinements and highly developed features to bring a Top Quality 2-in-1 Meter that detect moisture &
temperature.
FlowJam -
Material flow monitoring
Microwave detector for contactless monitoring
of material flows for "flow" or "no flow"
Absolutely insensitive against material deposits
For any line diameter
With adapter, usable up to 220 °C and 20 bar
With ceramic mounting, usable up to 1,000 °C
Compact (no separate electronics)
Signalling through relay switching
Different sensitivity levels
Detection through all non-conductive walls
Can also be supplied with short housing and separate electronics
Detection of material clogging and material standstill
The FlowJam detects solid flows of all types for material movement.
A differentiation is made between the following switching states:
- Material flow
- Material clogging / standstill or empty pipe
The system operates with no contact, using microwaves in a process in which the material movement is detected by using the Doppler effect.
The FlowJam is an especially process-secure device, since the microwave can penetrate material coating on the sensor and reliably detect the material movement behind it. If container walls, housings or pipelines are not metal, it is possible to measure from the outside.
The FlowJam can also be used under difficult conditions such as high operating temperatures and pressures with the help of a process adapter.
The FlowJam can be easily installed in the following ways:
Figure 1: Screwing into a G 1½"-inch-threaded connection
Figure 2: Using a DN 40 flange
Figure 3: Using a pipe clamp or other holding brackets
Weiber Computer Control Vibrating Test Chambers offer rapid temperature change rates with
combined temperature, humidity, and or vibration environments. All models are designed for
compatibility with your choice of electrodynamic or mechanical vibration systems.
In-Situ Calibration: Methods & Pitfalls of Thermal Mass Flow Meter Sensor Fie...Sierra Instruments
A unique and highly marketed benefit of thermal mass flow meter technology is “in-situ” or “in place” flow meter calibration. This certainly sounds like an alluring proposition to save time and money by avoiding the expense of returning the instrument to the factory for annual recalibration and recertification. But, not all methods of in-situ calibration validation are created equal!
In this white paper, Sierra Instruments examines five common methods of thermal mass flow meter in-situ calibration validation to help you make an informed decision for your business.
How to measure solids flow? Mass flow of Bulk Solids?Tiago Morais
How to measure mass flow of grain, bulk solids, cement, chemical products, coal, salt, Stone Powder, alumina, wood dust, malt, iron sulfate, coal dust, clinker dust, soot powder, fertilier, minerals, corn flour, gypsum, limestone, lime, active carbon, silicon powder, silica, sugar and much more...
Look for Envea's MaxxFlow, SolidFlow, FlowJam, DensFlow, PicoFlow.
Datasheet Fluke Intrinsically Safe Multifunction Process Calibrator. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Industrial Temperature Calibration Selection Guide by Fluke CalibrationFluke Calibration
The Industrial Temperature Calibration Selection Guide includes information on:
Field metrology wells
Infrared calibrators
Handheld and field dry-wells
Micro-baths
Environmental monitoring
Thermometer readouts
Reference sensors Industrial temperature calibration selection guide Tools
Coulometric Sulfur Analyzer is designed based on the principle of dynamic coulometric analysis. By measuring the charge consumed in the titration process, we can calculate the sulfur content according to Faraday law. The whole process, data processing, data displaying and data printing are real-timely controlled by the single-chip microcomputer. This instrument is an ideal tool for analysis of any materials such as Coal, Coke, Oil, Cement, Catalysts, Mineral Ores, Soils, Plants and many more, all your sulfur analysis needs are available from the superb range of sulfur analyzer produced by Jiangfen. For More Information Please Logon http://goo.gl/fuAGTc
How to Calibrate an RTD Using a Dry Block Calibrator v2Transcat
Transcat and Ron Ainsworth of Fluke Calibration detail the steps and considerations necessary for the calibration of an RTD with a Dry Block Calibrator.
Datasheet Fluke Field Metrology Well. Datasheet Fluke 9142. Datasheet Fluke 9143. Datasheet Fluke 9144. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Fluke Calibration on How to Calibrate an RTD Using a Dry block Calibrator Web...Transcat
What is covered:
1. Dry-block sources of error
2. Calculating uncertainties
3. How to calibrate probes with odd shapes and sizes
4. Temperature range concerns
5. Liquid-in-glass thermometers
6. RTD calibration example
7. Dry-block maintenance
QinetiQ help aircraft fly more safely and for longer by assuring the safe, efficient and cost-effective delivery of airborne capability. For more information @ http://www.qinetiq.com/services-products/air/Pages/through-life-aircraft-support.aspx
Dynamic simulation is a powerful technique for the study of batch processes. It can be used in design development, design validation, process optimisation and problem analysis.
The presentation link reviews the various configurations used to control stirred tank reactors. It also discusses the application of heat transfer oils for the heating and cooling of reactors.”
Anaerobic Inert ovens are equipment’s that are specially designed for anaerobic heat treatment or temperature characteristics testing along with non-oxidising gas such as carbon dioxide or nitrogen in hermetically saved ovens.For More Information Please Logon http://goo.gl/4EqHJz
In the last years, one of the important human challenge is the measuring and monitoring of indoor/outdoor air quality .
Regarding outdoor air quality control especially in crowded and industrial cities , measuring and monitoring of air quality parameters can assist respective organization to conclude useful rules which can help to air pollution control and human health.
Nowadays society rules and conditions caused that people be together in closed indoor environments like office, museum, cinema and… So control of indoor air quality is as important as outdoor air quality control.
We provide perfect and full range of instruments to measure indoor/outdoor air quality.
To get more information about your requirements don’t hesitate to contact our experts.
GE Webinar: Oxygen Measurement for Chemical & Fuel Storage SafetyTranscat
This webinar will explore:
-The parameters needed for an explosion or fire to occur
-Identifying "Lower Explosive Limit"
-Measuring oxygen concentration using Thermoparamagnetic Oxygen sensors
-Application considerations and case studies
Weiber Technical Solutions launches Coffee
Moisture Meters that incorporates a range of design
refinements and highly developed features to bring a Top Quality 2-in-1 Meter that detect moisture &
temperature.
Osso artificiale per test in laboratorio su dispositivi odontoiatriciTogetherToSolve
A&T 2016, Torino Lingotto Fiere
Sessione specialistica del 20 aprile 2016, ore 14:45 - 17:20
Relatori: Elisa Rossi, Alberto Lagazzo (Università di Genova)