This white paper looks at how the new generation of high-resolution inspection robots overcame the crack-depth sizing limit of previous-generation UT for detection, sizing and location of cracks and crack-like defects in the body and welds of transmission pipelines. Supporting test data is also provided.
A sensor is a device that detects and responds to some type of input from the physical environment.
The specific input could be light, heat, motion, moisture, pressure, or any one of a great number of other environmental phenomena.
The output is generally a signal that is converted to human-readable display at the sensor location or transmitted electronically over a network for reading or further processing.
Embedded System, EMBEDDED SYSTEM: AN INTRODUCTION, ELEMENTS OF EMBEDDED SYSTEMS, CORE THE OF EMBEDDED SYSTEM, CHARACTERISTICS & QUALITY ATTRIBUTES OF EMBEDDED SYSTEMS, EMBEDDED HARDWARE FROM SOFTWARE PROGRAMMERS PERSPECTIVE,
The presentation explains all that you need to know about Clamp Meters.
Fluke India is a leader in the manufacture, distribution and service of electronic test tools and software.
A sensor is a device that detects and responds to some type of input from the physical environment.
The specific input could be light, heat, motion, moisture, pressure, or any one of a great number of other environmental phenomena.
The output is generally a signal that is converted to human-readable display at the sensor location or transmitted electronically over a network for reading or further processing.
Embedded System, EMBEDDED SYSTEM: AN INTRODUCTION, ELEMENTS OF EMBEDDED SYSTEMS, CORE THE OF EMBEDDED SYSTEM, CHARACTERISTICS & QUALITY ATTRIBUTES OF EMBEDDED SYSTEMS, EMBEDDED HARDWARE FROM SOFTWARE PROGRAMMERS PERSPECTIVE,
The presentation explains all that you need to know about Clamp Meters.
Fluke India is a leader in the manufacture, distribution and service of electronic test tools and software.
Advance NDT method are much efficient than conventional NDT methods. these methods have great amount of automation which help in understanding and comparing the data occupied by different reading. These data can be used for the future references and can be saved and stored. these Advance NDT method can test or inspect any shape such as complex shape very easily and effeciently.
Corrosion monitoring in petroleum refineriesK R SONI
In petroleum refineries, corrosion of equipment takes place all through its operating life. It is essential to monitor the corrosion damage so that timely corrective actions like maintenance / repairs / rehabilitation of equipment can be undertaken before it causes unsafe plant operations.
The techniques employed for systematic corrosion monitoring of refinery equipment have been described in this presentation.
A proximity sensor is a sensor able to detect the presence of nearby objects without any physical contact. It detects An Object When The Object Approaches Within The Detection Range And Boundary Of The Sensor. Proximity Sensor Includes All The Sensor That Perform Non-Contact Detection In Comparison To Sensors Such As Limit Switch, That Detect The Object By Physically Contacting Them. It is a sensor able to detect the presence of nearby objects without any physical contact
Non-Destructive Testing is a simple way of testing without destroying.Techshore Inspection Services, with a humble beginning in Cochin, India started as an Engineering, Procurement and Construction company offering wide range of innovative services and engineering solutions in the field of Oil and Gas, Power and other major industries in the disciplines of Mechanical, Civil, Instrumentation and NDT, soon expanded its business into professional training in all the aforesaid disciplines.
non-destructive techniques used in maintenance engineering it covers a different type of technique like VISUAL.DYE penetrating testing. MAGNETIC particle, ULTRA Sonic testing RADIO GRAPHIC, and in last ndt importance
This presentation content various types of strain gauges, derivation of gauge factor.
Various course having subject as instrumentation, measuring devices, contenting strain measurement as a topic so introduction to strain gauge can help to understand the topic.
Testing comprise all the techniques of materials or products under different types of loadings. This way, the reliability of product to end user is assured and the process of material selection is done with a lot of ease.
Testing can be classified in two main categories depending upon destruction of products as
Destructive Testing
Non-Destructive Testing
These comprises all those techniques which are highly regulated on some standard in which specimen is broken/destructed.
Major destructive testing used these days are
Tensile Testing
Impact Testing
Burst Testing
Fatigue Testing
Creep Testing
Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component or system without causing damage.
Another terms for NDT is NDE
Highly valuable technique that can save both money and time in product evaluation.
Accident prevention and to reduce costs
To improve product reliability
To determine acceptance to a given requirement
To quick information on repair criteria.
Visual Inspection
Acoustic Emission
Eddy Current
Liquid Penetrant
X-Ray/ Radiography
Magnetic method
Visual and optical inspection (or testing) is still a basic method for many applications. Visual inspection involves using an inspector's eyes to look for defects. The inspector may also use special tools such as magnifying glasses, mirrors, or bore scopes to gain access and more closely inspect the subject area. Visual examiners follow procedures that range from simple to very complex.
Detection and analysis of AE signals can supply valuable information regarding the origin and importance of a discontinuity in a material.
It has many industrial applications
Assessing structural integrity (Welding)
Detecting flaws
Testing for leaks (Pressure Vessel)
Monitoring weld quality
Research tool.
In a standard eddy current testing a circular coil carrying current is which generates eddy current then the presence of any flaws, will cause a change in eddy current and a corresponding change in the phase and amplitude of the measured current.
Applications:
Surface Breaking Cracks
SBC using Sliding Probes
Tube Inspection Conductivity
Heat Treat Verification
In it the defects/cracks are studied using a penetrant/dye. low surface tension fluid penetrates into clean and dry surface-breaking discontinuities. Penetrant may be applied to the test component by dipping, spraying, or brushing. After adequate penetration time has been allowed, the excess penetrant is removed and a developer is applied. The developer helps to draw penetrant out of the flaw so that an invisible indication becomes visible to the inspector. Inspection is performed under ultraviolet or white light
X-rays are just like any other kind of electromagnetic radiation. They can be produced in parcels of energy called photons, just like light.
These are used to produce image
In this article from the January 2015 World Pipelines edition, Andre Lamarre, Business Development Manager - Power Generation and Pipeline Markets at Olympus NDT, writes about trusted UT inspection methods and new technique developments used to contribute to pipeline integrity.
More on Olympus ultrasonic flaw detectors: http://bit.ly/1zy3QUu
Contact us: http://bit.ly/1rDmq94
Sign up for our newsletter: http://bit.ly/1j5FOTy
Advance NDT method are much efficient than conventional NDT methods. these methods have great amount of automation which help in understanding and comparing the data occupied by different reading. These data can be used for the future references and can be saved and stored. these Advance NDT method can test or inspect any shape such as complex shape very easily and effeciently.
Corrosion monitoring in petroleum refineriesK R SONI
In petroleum refineries, corrosion of equipment takes place all through its operating life. It is essential to monitor the corrosion damage so that timely corrective actions like maintenance / repairs / rehabilitation of equipment can be undertaken before it causes unsafe plant operations.
The techniques employed for systematic corrosion monitoring of refinery equipment have been described in this presentation.
A proximity sensor is a sensor able to detect the presence of nearby objects without any physical contact. It detects An Object When The Object Approaches Within The Detection Range And Boundary Of The Sensor. Proximity Sensor Includes All The Sensor That Perform Non-Contact Detection In Comparison To Sensors Such As Limit Switch, That Detect The Object By Physically Contacting Them. It is a sensor able to detect the presence of nearby objects without any physical contact
Non-Destructive Testing is a simple way of testing without destroying.Techshore Inspection Services, with a humble beginning in Cochin, India started as an Engineering, Procurement and Construction company offering wide range of innovative services and engineering solutions in the field of Oil and Gas, Power and other major industries in the disciplines of Mechanical, Civil, Instrumentation and NDT, soon expanded its business into professional training in all the aforesaid disciplines.
non-destructive techniques used in maintenance engineering it covers a different type of technique like VISUAL.DYE penetrating testing. MAGNETIC particle, ULTRA Sonic testing RADIO GRAPHIC, and in last ndt importance
This presentation content various types of strain gauges, derivation of gauge factor.
Various course having subject as instrumentation, measuring devices, contenting strain measurement as a topic so introduction to strain gauge can help to understand the topic.
Testing comprise all the techniques of materials or products under different types of loadings. This way, the reliability of product to end user is assured and the process of material selection is done with a lot of ease.
Testing can be classified in two main categories depending upon destruction of products as
Destructive Testing
Non-Destructive Testing
These comprises all those techniques which are highly regulated on some standard in which specimen is broken/destructed.
Major destructive testing used these days are
Tensile Testing
Impact Testing
Burst Testing
Fatigue Testing
Creep Testing
Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component or system without causing damage.
Another terms for NDT is NDE
Highly valuable technique that can save both money and time in product evaluation.
Accident prevention and to reduce costs
To improve product reliability
To determine acceptance to a given requirement
To quick information on repair criteria.
Visual Inspection
Acoustic Emission
Eddy Current
Liquid Penetrant
X-Ray/ Radiography
Magnetic method
Visual and optical inspection (or testing) is still a basic method for many applications. Visual inspection involves using an inspector's eyes to look for defects. The inspector may also use special tools such as magnifying glasses, mirrors, or bore scopes to gain access and more closely inspect the subject area. Visual examiners follow procedures that range from simple to very complex.
Detection and analysis of AE signals can supply valuable information regarding the origin and importance of a discontinuity in a material.
It has many industrial applications
Assessing structural integrity (Welding)
Detecting flaws
Testing for leaks (Pressure Vessel)
Monitoring weld quality
Research tool.
In a standard eddy current testing a circular coil carrying current is which generates eddy current then the presence of any flaws, will cause a change in eddy current and a corresponding change in the phase and amplitude of the measured current.
Applications:
Surface Breaking Cracks
SBC using Sliding Probes
Tube Inspection Conductivity
Heat Treat Verification
In it the defects/cracks are studied using a penetrant/dye. low surface tension fluid penetrates into clean and dry surface-breaking discontinuities. Penetrant may be applied to the test component by dipping, spraying, or brushing. After adequate penetration time has been allowed, the excess penetrant is removed and a developer is applied. The developer helps to draw penetrant out of the flaw so that an invisible indication becomes visible to the inspector. Inspection is performed under ultraviolet or white light
X-rays are just like any other kind of electromagnetic radiation. They can be produced in parcels of energy called photons, just like light.
These are used to produce image
In this article from the January 2015 World Pipelines edition, Andre Lamarre, Business Development Manager - Power Generation and Pipeline Markets at Olympus NDT, writes about trusted UT inspection methods and new technique developments used to contribute to pipeline integrity.
More on Olympus ultrasonic flaw detectors: http://bit.ly/1zy3QUu
Contact us: http://bit.ly/1rDmq94
Sign up for our newsletter: http://bit.ly/1j5FOTy
Electric Resistance Weld (ERW) tubes and pipes are extensively used un many applications including Oil Country Tubular Goods (OCTG) and high quality structures. Efficient in-line nondestructive testing techniques are needed to ensure that the weld quality meets applications standards.
Measuring Crack Defects with Sub-Millimeter AccuracyNDT Global
Ultrasonic ILI robots offer increased crack-depth sizing accuracy. More importantly, they are an enabler for Enhanced Sizing methodology, allowing new ways to analyze data, which successfully overcome existing depth-sizing limitations.
Eclipse UCx sizing technology results in accurate depth values for many flaws, typically below 0.8mm (31 mil) tolerance. A combination of different data-sets, characteristics, and sizing methodologies allows highly accurate inspection, with greatly reduced tolerances. Sub-millimeter accuracy for the entire rang of flaws, including hook cracks, is now possible.
Ultrasonic Testing stands at the forefront of NDT methodologies, playing a pivotal role in ensuring the structural integrity of the material. Read More!
Nondestructive Testing (NDT) has evolved from being a “necessary evil” to being an essential source of competitive advantage. The right technique not only helps control the quality of the final product, but also provides valuable process control feedback to improve productivity, reduce cost, and increase the
efficiency of the welder. This is especially important in high-volume, continuous processing lines where a few minutes of bad production can result in significant losses.
In the last decade, powerful Ultrasonic EMAT technology has come of age with tremendous success, becoming the technique of choice for many applications.
International Journal of Engineering Research and Development (IJERD)IJERD Editor
call for paper 2012, hard copy of journal, research paper publishing, where to publish research paper,
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
In the fall of 2002, Innerspec introduced and patented an Ultrasonic Testing (UT) inspection system for surface inspection of mill rolls. This novel approach was designed to overcome known limitations of Eddy Current (EC) systems.
In 2014, Whemco Steel Castings Inc., a leader in mill roll manufacturing and service, approached Innerspec Technologies to expand the original Rollmate design with more capabilities.
When challenged to develop a new generation of mill roll inspection systems, Innerspec embraced the task and sought to design a comprehensive solution using the best NDT techniques available for the task.
The system is fully designed and manufactured in the United States, and serviced and supported by Innerspec offices in the US, Mexico, Europe and China.
Are Gutters Necessary? Explore the details now!AmeliaLauren3
Gutters are typically installed at a slight downward slope to allow water to flow freely towards downspouts or drains – the downspout being the vertical pipe attached to the gutters. The water is subsequently transported by the downspout to either the ground or an underground drainage system. Maintaining a gutter system that is free of blockages and functional requires regular maintenance.
But, many wonder in what situations gutters are required and not required. In this ppt we will discuss in detail the matter, ‘Are Gutters Necessary?’
SECUREX UK FOR SECURITY SERVICES AND MOBILE PATROLsecurexukweb
At Securex UK Ltd we are dedicated to providing top-rated security solutions tailored to your specific needs. With a team of highly trained professionals and cutting-edge technology, we prioritize your safety and peace of mind.
Our commitment to excellence extends beyond traditional security measures. We understand the dynamic nature of security challenges, and our personalized approach ensures that every client receives a bespoke protection plan.
Solar power panels, also known as photovoltaic (PV) panels, convert sunlight into electricity, offering a renewable and sustainable energy solution. Composed of semiconductor materials, typically silicon, these panels absorb photons from sunlight, generating an electric current through the photovoltaic effect. This clean energy source reduces dependence on fossil fuels, mitigates greenhouse gas emissions, and contributes to environmental sustainability.
Elevate Your Brand with Digital Marketing for Fashion IndustryMatebiz Pvt. Ltd
Matebiz Pvt. Ltd. specializes in providing cutting-edge digital marketing for Fashion Industry. Our comprehensive strategies ensure that your brand stands out in the competitive fashion landscape. From targeted social media campaigns to search engine optimization tailored for fashion keywords, we cover it all. With a deep understanding of industry trends and consumer behavior, we craft compelling content and engaging visuals to enhance your online presence. Trust Matebiz Pvt. Ltd. to elevate your fashion brand through strategic digital marketing initiatives.
Earth moving equipment refers to heavy-duty machines used in construction, mining, agriculture, and other industries to move large amounts of earth, soil, and other materials. These machines include excavators, bulldozers, loaders, and backhoes, which are essential for tasks such as digging, grading, and leveling land.
Earthmovers is a leading brand in the industry, known for providing reliable and high-performance earth moving equipment. Their machines are designed to handle the toughest jobs with efficiency and precision, ensuring optimal productivity on any project.
In the competitive realm of online business, visibility is key, and search engine optimization (SEO) serves as the cornerstone of digital prominence. As the demand for effective SEO solutions continues to soar, finding the best SEO company in Perth becomes imperative. Enter Simba Squad – a dynamic force dedicated to propelling your business to new heights of success.
Best steel industrial company LLC in UAEalafnanmetals
AL Afnan Steel Industrial Company LLC is a distinguished steel manufacturer and supplier, celebrated for its high-quality products and outstanding customer service. With a diverse portfolio that includes structural steel, and custom fabrications, AL Afnan meets a wide array of industrial demands. We are dedicated to using advanced technologies and sustainable methods to ensure excellence and reliability in every product, serving both local and international markets with efficiency.
Islamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxamilabibi1
Islamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docx
Learn about Inspect Edge, the leading platform for efficient inspections, featuring the advanced NSPIRE Inspection Application for seamless property assessments. Discover how the NSPIRE Inspection Application by Inspect Edge revolutionizes property inspections with advanced features and seamless integration.
Nature’s Paradise Glamorous And Sustainable Designs For Your Outdoor Living S...Landscape Express
Create a harmonious blend of luxury and sustainability in your outdoor living space with eco-friendly kitchens, enchanting water features, and lush plant landscaping. Embrace energy-efficient appliances, solar lighting, rainwater harvesting, and native plants to enhance beauty while reducing environmental impact. Transform your space into a glamorous, eco-conscious retreat for relaxation and social gatherings.
Experience the breathtaking beauty of a Waikiki sunset aboard the MAITAI Catamaran. Sail along the stunning coastline as the sun dips below the horizon, casting vibrant hues across the sky. Enjoy the gentle ocean breeze, refreshing drinks, and a relaxed atmosphere. This unforgettable voyage offers panoramic views of Diamond Head and the Waikiki skyline, making it the perfect way to end your day in paradise. Join us for a memorable sunset cruise you won't forget. Please visit our website: https://www.maitaicatamaran.net/ and call us at 808-922-5665 for additional information.
Best Catering Event Planner Miso-Hungry.pptxMiso Hungry
Miso-Hungry, led by Executive Chef Emilio Molina, is Islamorada's premier catering event planner. We specialize in sustainable, farm-fresh cuisine, using local ingredients to create unforgettable dishes. As a FollowTheFoodHMI branded company, we bring our culinary expertise across the U.S., connecting communities through exceptional food and personalized event planning. Let us showcase our family's passion and make your event extraordinary.
How Does Littering Affect the Environment.ClenliDirect
Read this PPT now to gain in-depth insights into how to fight litter and safeguard our landscapes from its negative impacts.
Visit-https://clenlidirect.com/cleaning-equipment/litter-picker-grabber-equipment.html
Delightful Finds: Unveiling the Power of Gifts Under 100JoyTree Global
Stretch your budget and spread joy! This guide explores the world of gifts under 100, proving thoughtful gestures don't require a hefty price tag. Discover unique and practical options for birthdays, holidays, or simply showing someone you care. Find inspiration for every occasion within your budget!
The Jamstack Revolution: Building Dynamic Websites with Static Site Generator...Softradix Technologies
In this infographic, the Jamstack architecture emphasizes pre-rendered content and decoupling the frontend from the backend. It leverages static site generators (SSGs) to create fast-loading HTML files and APIs for dynamic functionality. Benefits include improved performance, enhanced security, scalability, and ease of deployment. Real-world examples include Netlify, Gatsby, and Contentful. https://softradix.com/web-development/
Comprehensive Water Damage Restoration Serviceskleenupdisaster
Find out how Disaster Kleenup's professional water damage restoration services can quickly and efficiently restore your property. Find more about our advanced techniques and quick action plans. Visit here: https://iddk.com/disaster-cleanup-services/flood-damage/
Office Business Furnishings | Office EquipmentOFWD
OFWD is Edmonton’s Newest and most cost-effective source for Office Furnishings. Conveniently located on 170 street and 114 Avenue in Edmonton’s West End. We take pride in servicing a client base of over 500 corporations throughout the Edmonton and Alberta area. OFWD is in the business of satisfying the home or corporate office environment needs of our clients, from individual pieces of furniture for the home user to the implementation of complete turn-key projects on much larger scales. We supply only quality products from reputable manufacturers. It is our intention to continue to earn the trust of our clients by dealing with honesty and integrity and by providing service and after sales follow-up second to none.
SMS2ORBIT | launched in 2022 in Mumbai's Andheri area, aims to be the most reliable Bulk SMS Service Provider in Mumbai.
If More Information About The SMS Service Provided By SMS2ORBIT Is Desired, Please Don’t Hesitate To Contact The Business Team. They Can Be Reached At
business@sms2orbit.com Or By Calling 97248 55877.
1. www.ndt-global.com | White Paper | Ultrasonic Inline Inspection Advances 1 | 6
INTRODUCTION
More than three million kilometers of high-pressure liquid and gas pipelines are installed all
over the world. Generally, steel pipelines provide the safest means to transport large quantities
of oil, natural gas, and oil-related products. However, like any other technical component, they
can deteriorate. As a result, flaws can appear and grow until the pipeline fails. The appearance
of cracks, especially stress corrosion cracking, is of increasing concern. These flaws must be
identified before they endanger the integrity of the pipeline.
Intelligent inline inspection (ILI) systems are widely used throughout the industry to guarantee
safe operations. ILI tools record data while traveling through the entire pipeline from launcher
to receiver. Ultrasonic Technology (UT) is the most accurate and reliable ILI technology available
today. But, until recently, the capabilities of this technology were restrained by a limitation on
crack-depth sizing.
This white paper looks at how the new generation of high-resolution inspection robots overcame
the crack-depth sizing limit of previous-generation UT for detection, sizing, and locating of cracks
and crack-like defects in the body and welds of transmission pipelines. Supporting test data is
also provided.
Introduction
A brief history of NDT
Mainstream technology,
with limitations
First-generation
ultrasonic tools
High-resolution robots
Summary
References
ULTRASONIC ILI REMOVES
CRACK DEPTH-SIZING LIMITS
WHITE PAPER
2. ADVANCES IN SEVERAL AREAS
HAVE DRIVEN THE EVOLUTION OF
HIGH-RESOLUTION ROBOTS
High-resolution inspection robot – Evo Series 1.0 UCx
www.ndt-global.com | White Paper | Ultrasonic Inline Inspection Advances 2 | 6
A BRIEF HISTORY OF
NONDESTRUCTIVE TESTING
Nondestructive testing1
(NDT) has been practiced for many
decades, with initial developments spurred by the technological
advances that occurred during World War II and subsequent
defense efforts. Its original purpose was the detection of defects.
As a part of "safe life" design, it was intended that a structure
should not develop macroscopic defects during its lifetime, with
the detection of such defects being a cause for removal of the
component from service. In response to this need, increasingly
sophisticated techniques emerged from using ultrasonics, eddy
currents, x-rays, dye penetrants, magnetic particles, and other
forms of interrogating energy.
In the early 1970s, two events occurred that caused a major
change in the NDT field. Improvements in the technology led
to the ability to detect small flaws, which caused more parts to
be rejected even though the probability of component failure
had not changed. However, the discipline of fracture mechanics
emerged, which enabled the ability to predict whether a crack
of a given size will fail under a particular load when a material's
fracture toughness properties are known. Other methods were
developed to predict the growth rate of cracks under cyclic
loading (fatigue). With the advent of these tools, it became
possible to accept structures containing defects if the sizes
of those defects were known. This formed the basis for the
new philosophy of “damage tolerant” design. Components
having known defects could continue in service as long as it
is established that those defects would not grow to a critical,
failure producing size.
A new challenge was thus presented to the nondestructive
testing community. Detection was not enough. One needed to
also obtain quantitative information about flaw size to serve as
an input to fracture mechanics-based predictions of remaining
life. The need for quantitative information was particularly
strong in the defense and nuclear power industries and led
to the emergence of quantitative nondestructive evaluation
(QNDE) as a new engineering/research discipline. A number
of research programs around the world were started, such
as the Center for Nondestructive Evaluation at Iowa State
University (emerging from major research effort at the Rockwell
International Science Center), the Electric Power Research
Institute in Charlotte, North Carolina, the Fraunhofer Institute
for Nondestructive Testing in Saarbrucken, Germany, and the
Nondestructive Testing Centre in Harwell, England.
MAINSTREAM TECHNOLOGY,
WITH LIMITATIONS
Crack inspection of pipelines by pigging tools, or robots
using conventional ultrasonic shear wave technology has
become the standard for ILI of liquid pipelines. These robots
have proven very successful detection of various types of
cracks or crack-like anomalies. Because most cracks or
crack-like defects in pipelines are axially oriented, first-
generation inspection tools were developed for axial crack
inspection.
In comparison to circumferential cracks, axial cracking shows
a significant threat to the pipeline due to hoop stress. Cracks,
crack-like anomalies, or linear anomalies can appear in the
base material or in the longitudinal weld. The latter is the
greatest threat because this is the weakest area in the pipeline.
Axial anomalies in the long seam have different causes, such
as fatigue and manufacturing anomalies.
FIRST-GENERATION ULTRASONIC
TOOLS
Ultrasonic tools for inline inspection first appeared in the
early 1980s. The purpose of these tools was the detection
and sizing of metal loss. Crack inspection tools first appeared
in the mid-1990s. The major advantage of ultrasonic tools
is their ability to provide quantitative measurements of the
pipe wall inspected, unlike earlier-technology magnetic flux
leakage (MFL) tools. Experience has also proven that ultrasonic
technology provides a reliable means to detect and accurately
size cracks and crack-like anomalies in pipelines.
3. Figure 1 – Standard resolution loop test results, 49% within ±2 dB
Figure 2 – High-resolution loop test results, 85% within ±2 dB
Loop test details from standard and high-resolution inspections
TESTS HAVE PROVEN THAT THE INCREASE
OF CIRCUMFERENTIAL RESOLUTION REDUCED
DISPERSION OF THE MEASUREMENT
www.ndt-global.com | White Paper | Ultrasonic Inline Inspection Advances 3 | 6
Absolute depth sizing for crack inspections was introduced
around 2013, with the limitation that features greater than
4 mm (0.16 in) could not be sized. Technology improvements,
especially the introduction of high-resolution robots, have
allowed new methodologies to remove this limitation and size
the depth of the features for the full range.
HIGH-RESOLUTION ROBOTS
Advances in several areas have driven the evolution of high-
resolution robots. Among these advances are sensor size and
sensitivity, which enables increased density, and the ability to
acquire, store, and process much greater amounts of data.
The availability and quality of this data have in turn driven
improvements in analysis. The result is a large increase in
accuracy.
In general, the resolution of an ultrasonic ILI robot is produced
by four components:
■■ Axial resolution is the axial distance between two
consecutive measurements of the ultrasonic sensors.
■■ Circumferential resolution is the circumferential distance
between two adjacent ultrasonic sensors. Both axial and
circumferential resolution determine the scanning grid.
■■ Sampling frequency of analog-to-digital converter (ADC)
determines the resolution of the time-of-flight measurement
of ultrasonic indications as well as the maximum amplitude
error of the peak amplitude measurement.
■■ Sampling depth of ADC determines the resolution of the
amplitude measurement of ultrasonic indications. It also
relates to the dynamic amplitude range that can be covered.
Previous-generation tools typically have a standard
circumferential resolution of 10 mm (0.39 in). In comparison,
current-generation, high-resolution robots have 5 mm (0.20 in)
circumferential resolution. The resolution increase, provided by
doubling the number of sensors, has two highly useful effects:
1) it reduces measurement dispersion by having more sensors
scanning the same area, and
2) it increases the probability of having one sensor in the
optimal position in relation to the feature.
Tests have proven that the increase of circumferential
resolution reduced dispersion of the measurement.
Comparison between standard and high-resolution inspections
was performed at NDT Global's advanced testing facility in
Stutensee, Germany.
During the comparison, a threshold of ±2 dB was established
between the designed depth and the measured depth. Figure 1
displays the results from the standard resolution, where
0 dB on the X axis represents the amplitude expected to
calculate the designed depth. Standard robots show 49% of
the measurements within ±2 dB.
Figure 2 is the result of high-resolution loop tests. The chart
shows a homogeneous bell curve where 85% of the results are
within the established threshold of ±2 dB. Standard resolution
required a threshold of ±6 dB to achieve 80%.
Circumferential
resolution
No. of features Depth range
Standard 360 1 mm ... 5 mm with 1 mm steps
High resolution 2250 1 mm ... 5 mm with 1 mm steps
4. Figure 4 – CE amplitude response vs increasing feature depth (top) and
ICE amplitude response vs increasing feature depth (bottom)
Crack echo
Indirect crack echo
Figure 3 – Scanning grid for UC and UCx and corresponding examples of
sensor carriers
a) Scanning grid UC (3 mm x 10 mm)
c) Example UC sensor carrier
b) Scanning grid UCx (1.5 mm x 5 mm)
c) Example UCx sensor carrier
A NEW DEPTH-SIZING ALGORITHM WAS
DEVELOPED FOR THIS METHODOLOGY,
WHICH INCLUDES INPUT FROM
CONVENTIONAL PULSE-ECHO AND
THE ICE USED FOR ENHANCED SIZING
www.ndt-global.com | White Paper | Ultrasonic Inline Inspection Advances 4 | 6
Scanning Grid
Fig. 3 shows the scanning grid for the standard NDT Global
crack inspection robot (Fig. 3a) and the company's scanning
grid that can be achieved with high-resolution robot (Fig. 3b).
Here, the scanning grid is defined by the axial resolution and
the circumferential resolution. For high-resolution inspection,
the ultrasonic shot density is higher by a factor of four,
which increases the data volume by the same factor. The
improvement of the circumferential resolution can also be
recognized from the increased sensor density (Fig. 3c, 3d).
New Depth-sizing Methodology
Enhanced Sizing (ES) is a new depth-sizing methodology for
cracks. It is based on additional information extracted from the
data recorded by the robot. There are two main benefits from ES:
1) it removes the uncertainty for features > 4 mm (0.08 in),
meaning the depth sizing in absolute values is for the entire
wall thickness range; and
2) for the depth range between 2 and 4 mm (0.08 in and
0.16 in), ES provides a confirmation of the pulse-echo (PE)
depth. Enhanced Sizing methodology is ideal for high-resolution
inspections up to a maximum wall thickness of 13.0 mm (0.51 in).
Indirect Crack Echo
High resolution is the foundation of Enhanced Sizing
methodology, which removes the maximum depth-sizing
capabilities of 4 mm (0.08 in) that limits conventional pulse-
echo methods. This methodology also provides a depth
confirmation between 2 to 4 mm (0.08 in to 0.16 in). The
methodology is based on the indirect crack echo (ICE), which
increases proportionally to the depth of the feature. This echo
follows a different path than the corner echo (CE) used for PE.
ICE is recorded by the robot depending on the position of the
sensor relative to the feature. A new depth-sizing algorithm
was developed for this methodology, which includes input from
conventional pulse-echo and the ICE used for Enhanced Sizing.
The ICE amplitude is proportional to the depth of the crack.
The top side of Figure 4 describes the amplitude from the CE.
Once it reaches a depth of 4 mm (0.16 in), the signal is
saturated and it is not possible to calculate a depth beyond
that point. The bottom side of Figure 4 describes the ICE
amplitude: the deeper the feature, the higher the amplitude
5. Figure 5 – Old (a) and new (b) specification range for crack-depth sizing
NDE Depth (mm)
ILIDepth(mm)
0 1
1
2
3
4
5
6
7
8
9
10
12
4 72 5 83 6 9 10 12
±1.0 mm
≥ 4 mm
NDE Depth (mm)
ILIDepth(mm)
0 1
1
2
3
4
5
6
7
8
9
10
12
4 72 5 83 6 9 10 12
±0.8 mm
±0.9 mm
±1.2 mm
a) Former depth-sizing specification
b) Enhanced depth-sizing specification
www.ndt-global.com | White Paper | Ultrasonic Inline Inspection Advances 5 | 6
from the signal. ICE continues increasing for the full wall
thickness. The sizing algorithm considers this additional
information for the depth calculation. The outcome from the
algorithm is the reported depth.
By exploiting the amplitude of the ICE signal, the range of
crack depth sizing can be extended over the full wall
thickness (WT) where the covered WT range mainly depends
on the probe diameter. This new approach was verified by
modeling studies as well as comprehensive experimental
work including a variety of different pipe diameters and wall
thicknesses. As a result, a tolerance of ±1.2 mm (0.05 in)
at a certainty of 80% was determined for features with
depths ≥ 4 mm (0.08 in) (Fig. 5b). Compared to the old
sizing specification (Fig. 5a), where the depth range is limited
to the saturation depth of approximately 4 mm (0.08 in),
the enhanced sizing approach represents a major step
forward in the reliability of inline crack inspection.
SUMMARY
The elimination of crack depth-sizing limits by ultrasonic
inspection is a critically important advance in ILI inspection
methodology. This technology brings a new level of accuracy
to critical inspections, and should be strongly considered as a
component of every pipeline integrity management program.