UL Certification E333645
•
1 like•1,692 views
This document summarizes information about a wiring component manufacturer. It provides the company name and location, HuiZhou Lead Technology Co Ltd in HuiZhou, Guangdong, China. It also lists three types of printed wiring boards the company produces - multilayer metal base boards, multilayer boards, and single layer boards. It specifies technical details like minimum conductor width, thickness, spacing and temperature limits for each board type.
Report
Share
Report
Share
Download to read offline
Recommended
QCC Presentation
The document discusses quality circles (QCC), which are voluntary groups of workers that work to identify and solve work-related problems in order to improve organizational performance. Quality circles were first established in Japan in 1962 and involved workers volunteering to improve processes. The document then provides an example of a quality circle registration form and theme selection criteria used by Procon Engineering to establish a quality circle focused on preventative maintenance of key machines.
7 qc tools basic
The 7 basic quality control tools are presented, including:
1. Cause and effect diagrams for identifying potential causes of problems
2. Check sheets for collecting and analyzing data
3. Histograms and Pareto charts for understanding patterns in process data
4. Flowcharts for picturing process steps
5. Scatter diagrams for measuring relationships between variables
6. Control charts for recognizing sources of variation
The document provides an overview and examples of applying each of these 7 tools to quality control.
FMEA
This document provides an overview of Failure Mode and Effects Analysis (FMEA). It defines FMEA as a method used in engineering to document potential failure modes in a design. The document outlines the history, types, and process of FMEA. It describes how FMEA is used to identify, prioritize, and eliminate potential failures early in the design process. The key aspects of FMEA covered include failure modes, effects, causes, severity, occurrence, detection, and risk priority number.
8 D – Problem Solving Process
This document outlines the 8D problem solving process used by Ford Motor Company to continuously improve quality and prevent issues from reoccurring. The 8D process involves 8 disciplines: 1) Define the problem/failure, 2) Establish an interim containment action, 3) Determine the root cause(s), 4) Choose a permanent corrective action, 5) Implement and validate the corrective action, 6) Implement actions to prevent recurrence, 7) Recognize the problem-solving team, and 8) Document lessons learned. Each discipline involves defining objectives, collecting data, verifying solutions, and ensuring the problem is fully resolved before progressing to the next step. The goal is to take a structured, cross-functional team approach
TPM: 7 Steps of Autonomous Maintenance (Jishu Hozen) Poster
[To download this poster, visit:
https://www.oeconsulting.com.sg/training-presentations]
Autonomous Maintenance (Jishu Hozen) refers to TPM activities that involve operators in maintaining their own equipment, independent of the maintenance department.
The goals of the program are to prevent equipment deterioration, restore equipment to its ideal state, and establish basic conditions needed to keep equipment well maintained.
The Seven Steps of Autonomous Maintenance Poster highlights the key activities of Autonomous Maintenance as a key pillar of the TPM Excellence framework.
The poster comes in two themes: color and monochrome. Formatted in PDF and in editable PPTX, the poster can be easily printed on an A3-sized paper from an office copier machine and displayed at operator workstations, TPM Activity Boards, meeting rooms, maintenance workshop, or distributed together with your workshop handouts.
The poster complements the 'Autonomous Maintenance (Jishu Hozen)' training presentation materials. It serves as a takeaway and summary of your TPM or Autonomous Maintenance presentation.
Based on the JIPM standard, the Seven Steps of Autonomous Maintenance include:
Step 1 - Clean and Inspect
Step 2 - Eliminate Problem Sources & Inaccessible Areas
Step 3 - Draw Up Cleaning & Lubricating Standards
Step 4 - Conduct General Inspections
Step 5 - Conduct Autonomous Inspections
Step 6 - Standardize through Visual Workplace Management
Step 7 - Implement Autonomous Equipment Management
To download this poster, visit:
https://www.oeconsulting.com.sg/training-presentations
TPM: Autonomous Maintenance (Jishu Hozen) Framework Poster
The Autonomous Maintenance Framework Poster highlights the key Autonomous Maintenance process, methods and tools.
The AM Framework Poster comes in two themes: color and monochrome. Formatted in PDF, the poster can be easily printed on an A3-sized paper.
The AM Framework Poster complements the Autonomous Maintenance training presentation materials. It is an effective tool that can be printed and distributed to attendees of your TPM or AM awareness or workshop session. It serves as a takeaway and summary of your TPM or AM presentation.
The AM Framework Poster provides a description of the key Autonomous Maintenance process, methods and tools. It includes:
1. Goals of Autonomous Maintenance
2. The Autonomous Maintenance Approach
3. Four Equipment-related Skills for Operators
4. OEE: An Indicator of Equipment Health
5. Three Key Tools for Autonomous Maintenance Activities
6. Seven Steps of Autonomous Maintenance
7. Autonomous Maintenance Team Improvement Process
8. The 5Ws and 1H of Improvement
9. An Effective TPM Program Extends the Useful Life of Equipment.
Qc story
The document provides an introduction and overview of the QC Story methodology, which is a 9-step problem solving technique used to examine facts and data around quality, productivity, cost, logistic, safety and other problems. It involves selecting a theme, justifying the choice, understanding the current situation, setting targets, analyzing causes, implementing corrective measures, confirming effects, standardizing solutions, and planning future actions. Each step is then described in more detail, outlining the key elements and process to be followed at that stage of the QC Story.
Measurement System Analysis (MSA)
This document defines key concepts in measurement system analysis including accuracy, precision, stability, bias, repeatability, and reproducibility. It provides guidelines for conducting a measurement system analysis, including determining the number of appraisers and parts to measure, ensuring the measurement procedure is documented and followed, and analyzing the results in terms of stability, bias, and gauge R&R to determine if the measurement system is capable and can be used for decision making. The goal is to qualify measurement systems and identify opportunities for improvement.
Recommended
QCC Presentation
The document discusses quality circles (QCC), which are voluntary groups of workers that work to identify and solve work-related problems in order to improve organizational performance. Quality circles were first established in Japan in 1962 and involved workers volunteering to improve processes. The document then provides an example of a quality circle registration form and theme selection criteria used by Procon Engineering to establish a quality circle focused on preventative maintenance of key machines.
7 qc tools basic
The 7 basic quality control tools are presented, including:
1. Cause and effect diagrams for identifying potential causes of problems
2. Check sheets for collecting and analyzing data
3. Histograms and Pareto charts for understanding patterns in process data
4. Flowcharts for picturing process steps
5. Scatter diagrams for measuring relationships between variables
6. Control charts for recognizing sources of variation
The document provides an overview and examples of applying each of these 7 tools to quality control.
FMEA
This document provides an overview of Failure Mode and Effects Analysis (FMEA). It defines FMEA as a method used in engineering to document potential failure modes in a design. The document outlines the history, types, and process of FMEA. It describes how FMEA is used to identify, prioritize, and eliminate potential failures early in the design process. The key aspects of FMEA covered include failure modes, effects, causes, severity, occurrence, detection, and risk priority number.
8 D – Problem Solving Process
This document outlines the 8D problem solving process used by Ford Motor Company to continuously improve quality and prevent issues from reoccurring. The 8D process involves 8 disciplines: 1) Define the problem/failure, 2) Establish an interim containment action, 3) Determine the root cause(s), 4) Choose a permanent corrective action, 5) Implement and validate the corrective action, 6) Implement actions to prevent recurrence, 7) Recognize the problem-solving team, and 8) Document lessons learned. Each discipline involves defining objectives, collecting data, verifying solutions, and ensuring the problem is fully resolved before progressing to the next step. The goal is to take a structured, cross-functional team approach
TPM: 7 Steps of Autonomous Maintenance (Jishu Hozen) Poster
[To download this poster, visit:
https://www.oeconsulting.com.sg/training-presentations]
Autonomous Maintenance (Jishu Hozen) refers to TPM activities that involve operators in maintaining their own equipment, independent of the maintenance department.
The goals of the program are to prevent equipment deterioration, restore equipment to its ideal state, and establish basic conditions needed to keep equipment well maintained.
The Seven Steps of Autonomous Maintenance Poster highlights the key activities of Autonomous Maintenance as a key pillar of the TPM Excellence framework.
The poster comes in two themes: color and monochrome. Formatted in PDF and in editable PPTX, the poster can be easily printed on an A3-sized paper from an office copier machine and displayed at operator workstations, TPM Activity Boards, meeting rooms, maintenance workshop, or distributed together with your workshop handouts.
The poster complements the 'Autonomous Maintenance (Jishu Hozen)' training presentation materials. It serves as a takeaway and summary of your TPM or Autonomous Maintenance presentation.
Based on the JIPM standard, the Seven Steps of Autonomous Maintenance include:
Step 1 - Clean and Inspect
Step 2 - Eliminate Problem Sources & Inaccessible Areas
Step 3 - Draw Up Cleaning & Lubricating Standards
Step 4 - Conduct General Inspections
Step 5 - Conduct Autonomous Inspections
Step 6 - Standardize through Visual Workplace Management
Step 7 - Implement Autonomous Equipment Management
To download this poster, visit:
https://www.oeconsulting.com.sg/training-presentations
TPM: Autonomous Maintenance (Jishu Hozen) Framework Poster
The Autonomous Maintenance Framework Poster highlights the key Autonomous Maintenance process, methods and tools.
The AM Framework Poster comes in two themes: color and monochrome. Formatted in PDF, the poster can be easily printed on an A3-sized paper.
The AM Framework Poster complements the Autonomous Maintenance training presentation materials. It is an effective tool that can be printed and distributed to attendees of your TPM or AM awareness or workshop session. It serves as a takeaway and summary of your TPM or AM presentation.
The AM Framework Poster provides a description of the key Autonomous Maintenance process, methods and tools. It includes:
1. Goals of Autonomous Maintenance
2. The Autonomous Maintenance Approach
3. Four Equipment-related Skills for Operators
4. OEE: An Indicator of Equipment Health
5. Three Key Tools for Autonomous Maintenance Activities
6. Seven Steps of Autonomous Maintenance
7. Autonomous Maintenance Team Improvement Process
8. The 5Ws and 1H of Improvement
9. An Effective TPM Program Extends the Useful Life of Equipment.
Qc story
The document provides an introduction and overview of the QC Story methodology, which is a 9-step problem solving technique used to examine facts and data around quality, productivity, cost, logistic, safety and other problems. It involves selecting a theme, justifying the choice, understanding the current situation, setting targets, analyzing causes, implementing corrective measures, confirming effects, standardizing solutions, and planning future actions. Each step is then described in more detail, outlining the key elements and process to be followed at that stage of the QC Story.
Measurement System Analysis (MSA)
This document defines key concepts in measurement system analysis including accuracy, precision, stability, bias, repeatability, and reproducibility. It provides guidelines for conducting a measurement system analysis, including determining the number of appraisers and parts to measure, ensuring the measurement procedure is documented and followed, and analyzing the results in terms of stability, bias, and gauge R&R to determine if the measurement system is capable and can be used for decision making. The goal is to qualify measurement systems and identify opportunities for improvement.
Quality Circle Presentation Template
The document discusses a quality circle team that is working on reducing employee absenteeism in the C shift at a power generation plant. The team has identified work-related problems, selected one problem to focus on, and defined the problem of high employee absenteeism during the C shift. They analyzed the impact of the problem, identified potential causes, and found the root causes to be lack of transportation and health issues. The team developed a plan to address these root causes through solutions like providing transportation and conducting health checkups, with the goal of reducing absenteeism from 17% to 5% during the C shift.
8D analysis presentation
This is very useful presentation on "8D method" for analysis of customer complaint and rejection analysis.
5 S and KAIZEN
5S and KAIZEN are the two important knowledge for engineers of all departments. Production engineer should have this knowledge.
Lean Kanban Systems Training Module
The Lean Kanban Systems Training Module v2.0 includes:
1. MS PowerPoint Presentation including 83 slides covering an Introduction to Lean Management, Benefits of Lean Kanban Systems, Kanban Size Calculations, Three Types of Kanban Systems - Single Card Kanban - Dual or Machine Card Kanban - In-Process Kanban, and a Step-by-Step Kanban Implementation Process.
5 s ppt
5S is a workplace organization methodology consisting of five Japanese words - sorting, straightening, systematic cleaning, standardizing, and sustaining. The steps involve eliminating unnecessary items, clearly labeling storage areas, cleaning workspaces daily, making all workstations identical, and maintaining standards over time. Implementing 5S improves organizational efficiency, reduces waste, cuts frustration, and improves speed, quality, safety and the work environment. The objectives are increased productivity, safety, and reduced waste while gaining worker commitment.
5S Training Presentation
5S is short for: Sort, Set in Order, Shine, Standardize and Sustain. 5S represents 5 disciplines for maintaining a visual workplace.
#5S #5S Training #Business #BusinessManagement
Finite Element Analysis / CAE Portfolio
The document presents an overview of 10 Finite Element Analysis (FEA) projects of increasing complexity that demonstrate Nick Boyd's skills in mesh creation, analysis, and visualization. The projects involve manual mesh modeling, dynamic response analysis, beam deflection, vibration modal analysis, buckling loads, thermal stress analysis, and fluid flow simulation. Presentation of the FEA work is organized sequentially by project to showcase Nick's simulation-driven design engineering abilities.
Visual Management
Visual management is a set of techniques that use visual cues in the workplace to communicate and control processes. It aims to make work processes easy to understand through visual displays of information. The 5S methodology is a key part of visual management and aims to organize and clean the workplace. The 5S steps are sort, straighten, shine, standardize, and sustain. Implementing visual controls like color coding, labeling, and visual signals can help ensure processes are followed and the workplace is safely organized. Visual boards are also used to visually track key metrics and ensure issues are addressed. Overall, visual management strives to improve communication, safety, productivity and quality through a visually organized and controlled workplace.
5s lean manufacturing tool
Lean is a set of practices that aim to improve efficiency by eliminating waste. The 5S methodology is a workplace organization technique that originated in Japan for manufacturing. It consists of five Japanese words that translate to Sort, Set In Order, Shine, Standardize, and Sustain. The steps involve sorting through all items and removing unnecessary ones, arranging necessary items optimally, cleaning and inspecting regularly, standardizing processes, and sustaining practices through self-discipline. 5S has expanded beyond manufacturing to industries like healthcare and knowledge work by applying the principles to information and media instead of physical products.
Kaizen Event Guide
This Slideshare presentation is a partial preview of the full business document. To view and download the full document, please go here:
http://flevy.com/browse/business-document/kaizen-event-guide-311
A Kaizen Event is a rapid, focused application of Lean methods to reduce waste so as to improve cost, quality, delivery, speed, flexibility and responsiveness to internal/external customer needs.
This presentation guide provides a step-by-step guidance to the planning, preparation and conducting a Kaizen Event. It includes post-event follow up activites as well as templates for Kaizen charter and presentation to management and other stakeholders.
This event guide can be used together with the Kaizen training presentation.
Number of slides: 98
CONTENTS:
Introduction
- What is Kaizen?
- 10 rules of Kaizen
- What is the purpose of Kaizen?
- Value
- Types of waste
- What is a Kaizen event?
- Benefts of Kaizen and Kaizen events
8D Problem Solving - Automotive Industry
This document discusses the 8D problem solving methodology used in the automotive industry. 8D stands for 8 disciplines or 8 steps and was introduced by Ford Motor Company in the late 1980s as a systemic problem solving approach. The 8 steps include establishing a team, defining the problem, implementing containment, identifying the root cause, choosing and verifying permanent corrective actions, implementing the actions, and preventing recurrence. Visualization techniques and a focus on facts are emphasized to support analyzing problems and identifying root causes. The goal of 8D is to stop issues from recurring through a disciplined process.
3P Production Preparation Process Overview
The document describes a 3P (Production Preparation Process) event, which is an intense 3-5 day workshop to design lean manufacturing processes. A cross-functional team collaborates in the 3P to develop waste-free systems focused on material and information flow. Through rapid prototyping and testing alternatives, the team aims to launch new products and processes quicker with reduced costs and built-in quality. The 3P follows phases of information gathering, creative development of alternatives, capturing the new process design, implementation, and ongoing continuous improvement.
7 QC and New 7 QC Comparison & Applicability
Comparison of Application & Applicability
Problem Solving by 7 New QC Tools
7 New QC Tools help the managers address Strategic and Managerial Problems in 3 Stages
Stage 1 - Clarifying the "Actual Problem" by (1) Affinity Diagram and (2) Matrix Data Analysis
Stage 2 - Finding the "Real Root Cause" by (3) Relationship Diagram and (4) Matrix Diagram
Stage 3 - Implementation Plan and "Risk Mitigation" by (5)Tree Diagram, (6) Arrow Diagram and (7) PDPC
The 7 QC Tools (Basic) helps in problem solving when one deals with Quantitative / Numeric Data, where as 7 New QC Tools helps where there is Qualitative / Non-Numeric Data. Another major difference is that in 7 QC Tools (Basic) the problem is defined after collection of Data where as 7 New QC Tools helps to define the problem before data collection
Lean Government by Operational Excellence Consulting
Lean Government is a management philosophy based on the Toyota Production System (TPS). With Lean Government, you will be able to enhance value for your customers/citizens by improving public service delivery and eliminating waste. Simply put, by becoming a Lean organization, you will be able to increase productivity and create greater customer value with less resources.
This training presentation is especially tailored for the public sector. By teaching this presentation to public sector employees, they will have a better understanding of the Lean principles and approach to eliminating waste, and will be more forthcoming to lead and participate in the Lean implementation process.
LEARNING OBJECTIVES
1. Understand the principles and key concepts of Lean Government
2. Acquire knowledge on the key Lean methods and tools and their applications to eliminate waste and create increased value for customers/citizens
3. Identify ways to develop “Kaizen eyes” to look for improvement opportunities
4. Describe the various Lean roles
Building a Lean Management System
by Daniel T Jones of Lean Enterprise Academy shown at the Production Systems Conference in Stuttgart on 14th June 2004
5S: A Workplace Organization Method
By the end of the module, one can:
1.) Define and understand the importance of the 5s method
2.) Identify and overcome the barriers to productivity
3.) Improve QUALITY of work
4.) Practice efficiency at all times
Identifying Waste
The current global recession driven by COVID-19 has literally brought sales to a halt for many businesses. Compounded by high labour and material costs and unsold inventory, it is difficult to sustain your businesses without dramatic cost reductions. Before cutting salaries and laying off staff, now is the right time to seriously take a hard look at how you can quickly and systematically discover waste in your business processes and eliminate them so as to sustain a positive cash flow.
This presentation teaches you how to discover waste. Waste are all around us, and they include all those extraneous and counterproductive assumptions, attitudes, activities, materials, machines, operations and processes. This presentation can be used to educate your management and staff on the four models that can be used to systematically discover waste on the shopfloor. To be able to discover waste is the first step towards its elimination. This training material can also be used to supplement your Lean Manufacturing, Gemba Walk, Kaizen, 5S and TPM training materials.
LEARNING OBJECTIVES:
1. Discover waste in your work environment
2. Learn how to remove waste
3. Learn how to prevent waste
CONTENTS:
1. What is Waste?
What is Value?
What is Value-added?
What is Waste?
How Does Waste Take Root?
Waste Take Root When We Accept Stopgap Improvement
Benefits of Identifying & Eliminating Waste
2. The Classification of Waste
The Three MUs
The 5M + Q + S
The Flow of Goods
The Eight Types of Waste
3. How to Discover Waste
Three Approaches to Discover Waste
Using the Back Door
Bringing Latent Waste to the Surface
Analyzing Current Conditions
Value Stream Mapping
Value-added Flow Chart
Flow Analysis Chart
4. How to Remove Waste
Adopt the Necessary Attitude
Remove Waste in the Movement of Goods
Remove Waste in the Actions of People
Remove Waste in the Way People, Goods and Machines Are Combined
5. How to Prevent Waste
Standardization
Visual Controls
Auditory Controls
5W + 1H
To download this complete presentation, please visit: http://www.oeconsulting.com.sg
A3 Thinking Masterclass by John Kiff
This document outlines an agenda for a workshop on A3 thinking and problem solving. The workshop objectives are to explore lessons from Managing to Learn using A3s. The agenda covers defining an A3, working through examples, applying A3 thinking to problems, and discussing uses of A3s for proposals and reports. Time is allotted to introduce A3 concepts, examine example A3s, have participants apply the process to their own work, and reflect on learning. The workshop aims to help participants recognize effective A3 stories and create different sections of an A3 through practice and discussion.
5s and kaizen
The document describes the 5S methodology, which is a workplace organization method originally developed in Japan. It consists of five Japanese words that begin with "S": seiri, seiton, seiso, seiketsu, and shitsuke. The methodology involves sorting, setting in order, shining, standardizing, and sustaining a clean, orderly work environment. It is used to improve efficiency and effectiveness. The document also discusses the origins of 5S and how it relates to other improvement methods like kaizen and the PDCA (plan-do-check-act) cycle.
SCS-UL
This document provides information on printed wiring boards manufactured by Success Circuits Group Ltd. It lists three types of boards: multilayer printed wiring boards, single layer metal base printed wiring boards, and single layer printed wiring boards. For each type, it provides specifications on minimum conductor width, thickness, spacing, temperature rating and flammability rating. It also notes that the company name or file number and type designation is marked on each individual board.
Yaxinda technology
CAPABILITY: 1-20 layers, MCPCB, HDI, Rigid-flex boards,Rogers and heavy copper (To 20OZ), etc.
FAST: 24 &48 hours quick-turn & 4-5 days standard turn.
MATERIAL: Fr4(TG135℃-TG180℃), Aluminum, copper base,Rogers, Ventec, Arlon, Bergquist, etc.
FLEXIBLE: Our payment terms are T/T in advance & monthly payment or other flexible payment term under negotiated.
RELIABLE: We can streamline all the procedures in our own factory, two production lines(prototypes only and volumes line)
and three FQC department for overseas special can assure best lead time and quality.
More Related Content
What's hot
Quality Circle Presentation Template
The document discusses a quality circle team that is working on reducing employee absenteeism in the C shift at a power generation plant. The team has identified work-related problems, selected one problem to focus on, and defined the problem of high employee absenteeism during the C shift. They analyzed the impact of the problem, identified potential causes, and found the root causes to be lack of transportation and health issues. The team developed a plan to address these root causes through solutions like providing transportation and conducting health checkups, with the goal of reducing absenteeism from 17% to 5% during the C shift.
8D analysis presentation
This is very useful presentation on "8D method" for analysis of customer complaint and rejection analysis.
5 S and KAIZEN
5S and KAIZEN are the two important knowledge for engineers of all departments. Production engineer should have this knowledge.
Lean Kanban Systems Training Module
The Lean Kanban Systems Training Module v2.0 includes:
1. MS PowerPoint Presentation including 83 slides covering an Introduction to Lean Management, Benefits of Lean Kanban Systems, Kanban Size Calculations, Three Types of Kanban Systems - Single Card Kanban - Dual or Machine Card Kanban - In-Process Kanban, and a Step-by-Step Kanban Implementation Process.
5 s ppt
5S is a workplace organization methodology consisting of five Japanese words - sorting, straightening, systematic cleaning, standardizing, and sustaining. The steps involve eliminating unnecessary items, clearly labeling storage areas, cleaning workspaces daily, making all workstations identical, and maintaining standards over time. Implementing 5S improves organizational efficiency, reduces waste, cuts frustration, and improves speed, quality, safety and the work environment. The objectives are increased productivity, safety, and reduced waste while gaining worker commitment.
5S Training Presentation
5S is short for: Sort, Set in Order, Shine, Standardize and Sustain. 5S represents 5 disciplines for maintaining a visual workplace.
#5S #5S Training #Business #BusinessManagement
Finite Element Analysis / CAE Portfolio
The document presents an overview of 10 Finite Element Analysis (FEA) projects of increasing complexity that demonstrate Nick Boyd's skills in mesh creation, analysis, and visualization. The projects involve manual mesh modeling, dynamic response analysis, beam deflection, vibration modal analysis, buckling loads, thermal stress analysis, and fluid flow simulation. Presentation of the FEA work is organized sequentially by project to showcase Nick's simulation-driven design engineering abilities.
Visual Management
Visual management is a set of techniques that use visual cues in the workplace to communicate and control processes. It aims to make work processes easy to understand through visual displays of information. The 5S methodology is a key part of visual management and aims to organize and clean the workplace. The 5S steps are sort, straighten, shine, standardize, and sustain. Implementing visual controls like color coding, labeling, and visual signals can help ensure processes are followed and the workplace is safely organized. Visual boards are also used to visually track key metrics and ensure issues are addressed. Overall, visual management strives to improve communication, safety, productivity and quality through a visually organized and controlled workplace.
5s lean manufacturing tool
Lean is a set of practices that aim to improve efficiency by eliminating waste. The 5S methodology is a workplace organization technique that originated in Japan for manufacturing. It consists of five Japanese words that translate to Sort, Set In Order, Shine, Standardize, and Sustain. The steps involve sorting through all items and removing unnecessary ones, arranging necessary items optimally, cleaning and inspecting regularly, standardizing processes, and sustaining practices through self-discipline. 5S has expanded beyond manufacturing to industries like healthcare and knowledge work by applying the principles to information and media instead of physical products.
Kaizen Event Guide
This Slideshare presentation is a partial preview of the full business document. To view and download the full document, please go here:
http://flevy.com/browse/business-document/kaizen-event-guide-311
A Kaizen Event is a rapid, focused application of Lean methods to reduce waste so as to improve cost, quality, delivery, speed, flexibility and responsiveness to internal/external customer needs.
This presentation guide provides a step-by-step guidance to the planning, preparation and conducting a Kaizen Event. It includes post-event follow up activites as well as templates for Kaizen charter and presentation to management and other stakeholders.
This event guide can be used together with the Kaizen training presentation.
Number of slides: 98
CONTENTS:
Introduction
- What is Kaizen?
- 10 rules of Kaizen
- What is the purpose of Kaizen?
- Value
- Types of waste
- What is a Kaizen event?
- Benefts of Kaizen and Kaizen events
8D Problem Solving - Automotive Industry
This document discusses the 8D problem solving methodology used in the automotive industry. 8D stands for 8 disciplines or 8 steps and was introduced by Ford Motor Company in the late 1980s as a systemic problem solving approach. The 8 steps include establishing a team, defining the problem, implementing containment, identifying the root cause, choosing and verifying permanent corrective actions, implementing the actions, and preventing recurrence. Visualization techniques and a focus on facts are emphasized to support analyzing problems and identifying root causes. The goal of 8D is to stop issues from recurring through a disciplined process.
3P Production Preparation Process Overview
The document describes a 3P (Production Preparation Process) event, which is an intense 3-5 day workshop to design lean manufacturing processes. A cross-functional team collaborates in the 3P to develop waste-free systems focused on material and information flow. Through rapid prototyping and testing alternatives, the team aims to launch new products and processes quicker with reduced costs and built-in quality. The 3P follows phases of information gathering, creative development of alternatives, capturing the new process design, implementation, and ongoing continuous improvement.
7 QC and New 7 QC Comparison & Applicability
Comparison of Application & Applicability
Problem Solving by 7 New QC Tools
7 New QC Tools help the managers address Strategic and Managerial Problems in 3 Stages
Stage 1 - Clarifying the "Actual Problem" by (1) Affinity Diagram and (2) Matrix Data Analysis
Stage 2 - Finding the "Real Root Cause" by (3) Relationship Diagram and (4) Matrix Diagram
Stage 3 - Implementation Plan and "Risk Mitigation" by (5)Tree Diagram, (6) Arrow Diagram and (7) PDPC
The 7 QC Tools (Basic) helps in problem solving when one deals with Quantitative / Numeric Data, where as 7 New QC Tools helps where there is Qualitative / Non-Numeric Data. Another major difference is that in 7 QC Tools (Basic) the problem is defined after collection of Data where as 7 New QC Tools helps to define the problem before data collection
Lean Government by Operational Excellence Consulting
Lean Government is a management philosophy based on the Toyota Production System (TPS). With Lean Government, you will be able to enhance value for your customers/citizens by improving public service delivery and eliminating waste. Simply put, by becoming a Lean organization, you will be able to increase productivity and create greater customer value with less resources.
This training presentation is especially tailored for the public sector. By teaching this presentation to public sector employees, they will have a better understanding of the Lean principles and approach to eliminating waste, and will be more forthcoming to lead and participate in the Lean implementation process.
LEARNING OBJECTIVES
1. Understand the principles and key concepts of Lean Government
2. Acquire knowledge on the key Lean methods and tools and their applications to eliminate waste and create increased value for customers/citizens
3. Identify ways to develop “Kaizen eyes” to look for improvement opportunities
4. Describe the various Lean roles
Building a Lean Management System
by Daniel T Jones of Lean Enterprise Academy shown at the Production Systems Conference in Stuttgart on 14th June 2004
5S: A Workplace Organization Method
By the end of the module, one can:
1.) Define and understand the importance of the 5s method
2.) Identify and overcome the barriers to productivity
3.) Improve QUALITY of work
4.) Practice efficiency at all times
Identifying Waste
The current global recession driven by COVID-19 has literally brought sales to a halt for many businesses. Compounded by high labour and material costs and unsold inventory, it is difficult to sustain your businesses without dramatic cost reductions. Before cutting salaries and laying off staff, now is the right time to seriously take a hard look at how you can quickly and systematically discover waste in your business processes and eliminate them so as to sustain a positive cash flow.
This presentation teaches you how to discover waste. Waste are all around us, and they include all those extraneous and counterproductive assumptions, attitudes, activities, materials, machines, operations and processes. This presentation can be used to educate your management and staff on the four models that can be used to systematically discover waste on the shopfloor. To be able to discover waste is the first step towards its elimination. This training material can also be used to supplement your Lean Manufacturing, Gemba Walk, Kaizen, 5S and TPM training materials.
LEARNING OBJECTIVES:
1. Discover waste in your work environment
2. Learn how to remove waste
3. Learn how to prevent waste
CONTENTS:
1. What is Waste?
What is Value?
What is Value-added?
What is Waste?
How Does Waste Take Root?
Waste Take Root When We Accept Stopgap Improvement
Benefits of Identifying & Eliminating Waste
2. The Classification of Waste
The Three MUs
The 5M + Q + S
The Flow of Goods
The Eight Types of Waste
3. How to Discover Waste
Three Approaches to Discover Waste
Using the Back Door
Bringing Latent Waste to the Surface
Analyzing Current Conditions
Value Stream Mapping
Value-added Flow Chart
Flow Analysis Chart
4. How to Remove Waste
Adopt the Necessary Attitude
Remove Waste in the Movement of Goods
Remove Waste in the Actions of People
Remove Waste in the Way People, Goods and Machines Are Combined
5. How to Prevent Waste
Standardization
Visual Controls
Auditory Controls
5W + 1H
To download this complete presentation, please visit: http://www.oeconsulting.com.sg
A3 Thinking Masterclass by John Kiff
This document outlines an agenda for a workshop on A3 thinking and problem solving. The workshop objectives are to explore lessons from Managing to Learn using A3s. The agenda covers defining an A3, working through examples, applying A3 thinking to problems, and discussing uses of A3s for proposals and reports. Time is allotted to introduce A3 concepts, examine example A3s, have participants apply the process to their own work, and reflect on learning. The workshop aims to help participants recognize effective A3 stories and create different sections of an A3 through practice and discussion.
5s and kaizen
The document describes the 5S methodology, which is a workplace organization method originally developed in Japan. It consists of five Japanese words that begin with "S": seiri, seiton, seiso, seiketsu, and shitsuke. The methodology involves sorting, setting in order, shining, standardizing, and sustaining a clean, orderly work environment. It is used to improve efficiency and effectiveness. The document also discusses the origins of 5S and how it relates to other improvement methods like kaizen and the PDCA (plan-do-check-act) cycle.
What's hot (20)
Lean Government by Operational Excellence Consulting
Lean Government by Operational Excellence Consulting
Similar to UL Certification E333645
SCS-UL
This document provides information on printed wiring boards manufactured by Success Circuits Group Ltd. It lists three types of boards: multilayer printed wiring boards, single layer metal base printed wiring boards, and single layer printed wiring boards. For each type, it provides specifications on minimum conductor width, thickness, spacing, temperature rating and flammability rating. It also notes that the company name or file number and type designation is marked on each individual board.
Yaxinda technology
CAPABILITY: 1-20 layers, MCPCB, HDI, Rigid-flex boards,Rogers and heavy copper (To 20OZ), etc.
FAST: 24 &48 hours quick-turn & 4-5 days standard turn.
MATERIAL: Fr4(TG135℃-TG180℃), Aluminum, copper base,Rogers, Ventec, Arlon, Bergquist, etc.
FLEXIBLE: Our payment terms are T/T in advance & monthly payment or other flexible payment term under negotiated.
RELIABLE: We can streamline all the procedures in our own factory, two production lines(prototypes only and volumes line)
and three FQC department for overseas special can assure best lead time and quality.
데이타로직 DS1500 1D 산업용 고정식 바코드스캐너 고성능 소형 레이저스캐너 매뉴얼
DS1500 바코드스캐너는 소형으로 현장의 OEM 설비 및 자동기계 장치를 쉽게 통과합니다.
높은 스캔 속도와 정교한 전자 설계는 어려운 판독 조건을 효과적으로 해결합니다.
임베디드 ACB ™ (Advanced Code Builder) 재구성 SW 알고리즘을 사용하면 손상되었거나 잘못 적용된 레이블을 일관되게 디코딩 할 수 있습니다.
데이타로직 DS1500의 설치 및 구성은 소형 크기 및 막대그래프가 있는 새로운 테스트 작동 모드 덕분에 쉽고 간단합니다.
테스트 모드는 스캐너의 푸시 버튼 (외부 PC 불필요)을 통해 활성화되며 LED 막대 그래프는 실시간 읽기 백분율을 표시합니다. 이 기능은 자동화 기계의 제품 전환 중에 스캐너의 설치 및 재배치의 용이성을 높입니다.
DS1500은 최대 1200scan/s 속도로 작동하므로 고속의 문서처리, 용지삽입, 레이블 되감기 및 포장기계까지 응용범위를 확장 할 수 있습니다.
초소형 사이즈
소프트웨어로 모터 온/오프 조절
OEM에 적합한 설계
ACB™ 코드 빌더
소프트웨어로 모터 온/오프 조절
크기 : 40x30x22mm
보호등급 : IP65
리딩범위 : 40mm에서 240mm
최대해상도 : 0.10mm(4mils)
막대그래프형의 테스트모드
전원 : 5VDC, 최대2W
보호등급 : IP65
적용분야:
자동기계의 OEM 통합
ATL
문서작업 기기
프린트 & 부착 시스템
고속 의약품 포장
포장기기
ELECTRICAL CHARACTERISTICS
Power Supply : 5 VDC
Power Consumption : 2 W Max.
MECHANICAL CHARACTERISTICS
Dimensions : 40 x 30 x 22 mm
Weight : 44 g without cable
Case material : Zama (zinc, aluminum, magnesium alloy)
PERFORMANCE
Light source : Visible laser diode (658 nm)
Max. Resolution : 0,15 mm
Scanning speed : 1200 scans/s o 800 scans/s (SW selectable)
Max. Reading distance : 240 mm / 9.45 in (on codes with 0.50 mm/20 mils resolution)
Max. Depth of field : 200 mm / 7.87 in (on codes with 0.50 mm/20 mils resolution)
Aperture angle : 60°
Readable codes : All main linear bar code symbologies
Reconstruction software acb ™ : (Advanced Code Builder) integrated
Multilabel reading : Up to 6 different codes readable in the same phase
User interface : Pushbutton, 5 LEDs (scanner status/performance monitor)
Led indicators : ‘Power on/100’, ‘Good Read/80%’, ‘Ext. Trig./60%’, ‘TX Data/40%’, ‘Laser On/20%’
Input/output signals : 1 digital Input + 2 programmable digital outputs
Programming method : Via serial port (Winhost™)
Operating modes : On Line; Serial On Line; Automatic; Continuous; Test
Connectivity : 2 x RS232 o 1 x RS485 (full o half duplex) SW selectable
Baud rate : Up to 115,2 KBaud
Laser classification : Classe 2 - EN 60825-1, Class II - CDRH
Laser control : Safety system to turn laser off in cases of motor slowdown or failure
Motor control : On/Off via SW command
ENVIRONMENT
Operating temperature : 0 ÷ 45°C
Storage temperature : -20 ÷ 70 °C
Humidity : 90% non condensing
Vibration resistance : IEC 68-2-6 test FC 1.5 mm; 10 to 55 Hz; 2 hours on aech axis 2.5 W max; 2.0 W typ.
Shock resistance : IEC 68-2-27 test EA 30 G; 11 ms; 3 shocks on each axis
Protection class : IP65
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Laptop Dell Inspiron 5577 Chiến Game Mượt Mà
This document provides product safety, EMC and environmental compliance information for the Inspiron 15 5577 laptop. It includes details on regulatory approvals, materials used, packaging, batteries, power consumption, noise emissions, and recycling/end-of-life instructions. Performance and environmental impact data is also listed to comply with various regulations including ErP Lot 3.
Panduit Lockout Tagout Electrical Safety Catalogue
The document describes lockout/tagout products from Panduit including training kits, videos and materials to help companies comply with OSHA regulations. It lists various lockout devices such as circuit breaker locks, plug locks, and padlock kits that securely lock out energy sources during equipment service and repair. Contact information is provided for technical support.
SDL-S1000D Training
The data module code for the given XML would be:
DMC-S1000DLIGHTING-AAA-D00-00-00-00AA-056A-A_007-00_EN-US.xml
The XML filename in which this data appears would be:
DMC-S1000DLIGHTING-AAA-D00-00-00-00AA-056A-A_007-00_EN-US.xml
Dell Inspiron 7567 - Laptops Trần Phát
Sản phẩm sở hữu thiết kế đẹp mắt, nổi bật và tinh tế.
Máy mang đến những trải nghiệm âm thanh tốt nhất.
Hiệu năng máy mang đến vô cùng ổn định, load nhanh.
Thời lượng pin cao, có thể sử dụng trong nhiều giờ.
Mua máy được tặng kèm Windows bản quyền.
Nguồn: https://laptops.vn/san-pham/dell-inspiron-7567/
Huawei Bts3900C (omb+rru) (ver.c) hardware description
This document describes the functions, specifications, and configurations of the components in the BTS3900C cabinet as well as cable types, cable connections, and connector
specifications.
This document serves as a reference for the BTS3900C site planning and deployment.
dbs3900.pdf
This document provides installation instructions for the DBS3900 devices on an Indoor Centralized Rack (ICR). It describes unpacking equipment, obtaining identification numbers, installation procedures and cable connections. The document covers both height-restricted and height-unrestricted installation scenarios using -48V DC, 220V AC or +24V DC power sources. Diagrams illustrate device placements and cable routing. Checklists and power-on testing are included to ensure proper installation.
Umtsrns 203 lmt data configuration
This document provides a summary of the LMTData Configuration document:
- The document provides information on configuring ZTE base station equipment using the local maintenance terminal (LMT), including configuring basic attributes, clock reference, racks, topology, environment monitoring, and dry contact.
- It describes transmission configuration procedures such as configuring E1/T1, HDLC, PPP, Ethernet, global port, IP parameters, static routes, SCTP, and SCTP streams.
- Radio configuration procedures are also covered, like configuring RF central frequency, UMTS cell, RF connection, baseband resource pool, local cell, GSM sector, carrier, and RU.
manualdeservicioXeroxDC250FullServiceManual.pdf
This document provides an introduction and overview of the service documentation for the DocuColor 250 copier/printer. It describes the organization and contents of the service documentation, how to use it, safety icons and symbols used, and electrostatic discharge precautions for field service personnel. The introduction emphasizes that the service documentation is intended for certified, trained service personnel only and does not represent that it will notify customers of future changes.
S1000D - An Overview
This whitepaper from CDG provides a high level overview of the background and benefits of the S1000D publications standard. This standard has been widely used in Europe for many years, and is now gaining momentum in the US as well.
Panduit Lockout Tagout Electrical Safety Catalogue
This document provides an overview of lockout/tagout devices and training products from Panduit. It includes:
- A variety of lockout devices for locking out energy sources like circuit breakers, plugs, and cords to ensure they cannot be reenergized accidentally during service or maintenance.
- Training kits and materials to help companies comply with OSHA lockout/tagout regulations and properly train employees, including videos, templates, and interactive presentations.
- Lockout device kits that package commonly used circuit breaker lockout devices together for convenience.
The document emphasizes that Panduit offers a complete line of products to help implement and maintain an effective lockout/tagout safety program in compliance
CATVANLOI.COM GI CONDUIT/electrical conduit catalog 2013 - Vietnam.pdf
This document provides information about Smartube, an in-line hot-dip galvanized electrical steel conduit manufactured by Southern Steel Pipe Sdn. Bhd. It details Smartube's specifications, certifications, product lines, applications, and features. Southern Steel Pipe is an established steel mill in Malaysia with ISO and UL certifications for its conduit products.
CATVANLOI.VN Smartube electrical conduit catalog certtificate.pdf
This document provides information about Smartube, an in-line hot-dip galvanized electrical steel conduit manufactured by Southern Steel Pipe Sdn. Bhd. It details Smartube's specifications, certifications, features, color options, and applications. Southern Steel Pipe is an established steel mill in Malaysia with ISO and UL certifications for its conduit products.
ITP
This document contains an Individual Task List (ITL) for an employee, listing over 100 tasks related to tool control, hazardous waste management, equipment accountability, technical order distribution, general maintenance procedures, mobility procedures, vehicle operation, and electronic principles training. The tasks include performing inspections, understanding and applying various policies and procedures, and completing certification and documentation requirements. Most tasks are listed as not having start and completion dates, indicating they remain for the employee to be certified on.
Lightning protection ag
1. This document provides guidance on developing and installing lightning protection systems according to UL 96A and NFPA 780 standards. It defines key terms and outlines requirements for system certification and labeling.
2. Correct installation of UL listed components according to standards can ensure the system will be certified upon inspection. Systems are re-inspected every 5 years to check for damage.
3. The guide explains UL listing versus classification and different UL marks to identify certified products and components.
HP ProBook 655 G2 Service Manual / Guide
This document provides product descriptions for several HP ProBook notebook models, including the HP 640 G2, HP 645 G2, HP 650 G2, and HP 655 G2. It includes specifications for processors, chipsets, graphics, displays, memory, storage, optical drives, audio, camera, wireless, and Ethernet options. The document also provides information on batteries, removable parts, and locating system information.
Dell Inspiron 7570 - Laptops Trần Phát
Thiết kế thanh lịch, sang trọng và hiện đại
Độ bền của máy cao
Có thể xoay gập 180 độ
Hiệu năng cao, có thể chạy được các game phổ biến, ứng dụng đồ họa
Khả năng nâng cấp máy tốt, dễ dàng
Màn hình kích thước lớn, mang lại trải nghiệm tuyệt vời
Độ phân giải màn hình cao, không gây chói lóa
Màn hình cảm ứng tiện dụng
Nguồn: https://laptops.vn/san-pham/dell-inspiron-7570/
SCC
The SCC is a digital compression load cell that measures force. It has a low profile stainless steel design, IP66 and IP68 sealing, capacities from 10 to 100 tons, and provides a digital output via RS-485 or RS-422 interface with resolutions up to 240,000 counts. It is suitable for weighbridges and silo hopper weighing applications.
Similar to UL Certification E333645 (20)
Panduit Lockout Tagout Electrical Safety Catalogue
Panduit Lockout Tagout Electrical Safety Catalogue
Huawei Bts3900C (omb+rru) (ver.c) hardware description
Huawei Bts3900C (omb+rru) (ver.c) hardware description
Panduit Lockout Tagout Electrical Safety Catalogue
Panduit Lockout Tagout Electrical Safety Catalogue
CATVANLOI.COM GI CONDUIT/electrical conduit catalog 2013 - Vietnam.pdf
CATVANLOI.COM GI CONDUIT/electrical conduit catalog 2013 - Vietnam.pdf
CATVANLOI.VN Smartube electrical conduit catalog certtificate.pdf
CATVANLOI.VN Smartube electrical conduit catalog certtificate.pdf
UL Certification E333645
- 1. Wiring, Printed - Component Marking: Company name or trademark and type designation. May be followed by a suffix to denote factory identification. Copyright ?2010 Underwriters Laboratories Inc.® The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2010 Underwriters Laboratories Inc.®" ZPMV2.E333645 Wiring, Printed - Component Enhanced searching capability for this category can be found in UL's iQ Family of Databases (iq.ul.com). Page Bottom See General Information for Wiring, Printed - Component HUIZHOU LEAD TECHNOLOGY CO LTD E333645 13 LIANFAHANG S LIANFA RD TONGQIAO INDUSTRIAL ZONE HUIZHOU, GUANGDONG 516000 CHINA Cond Width Max Max Min Cond SS/ Area Solder Oper Meets C Min Edge Thk DS/ Diam Limits Temp Flame UL796 T Type mm(in) mm(in) mic(mil) DSO mm(in) C sec C Class DSR I Multilayer metal base printed wiring boards.. LD- AL 0.16 (0.006) 0.48 (0.019) 30 (1.18) Int:102 SS 25.4 (1.0) 288 60 130 V-0 All - Multilayer printed wiring boards. W- 02 0.10 (0.004) 0.20 (0.008) 17 (0.67) Int:35 DS 25.4 (1.0) 280 5 130 V-0 All - Single layer printed wiring boards. W- 01 0.14 (0.006) 0.14 (0.006) 35 (1.38) DS 50.8 (2.0) 260 10 130 V-0 All - Last Updated on 2010-07-07 Questions? Print this page Notice of Disclaimer Page Top 页码，1/1ZPMV2.E333645 - Wiring, Printed - Component 2010-7-12http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage....