Transmisión boomer 281.pdf
•
0 likes•18 views
This document provides training information for driving and operating the braking and steering systems of an Atlas Copco product. It includes diagrams of the hydraulic systems, descriptions of how to start the diesel engine and pressurize the system, and explanations of how to operate the tramming, service brakes, parking brake, and steering. The overall goal of the training is for the user to understand the components and hydraulic circuitry involved in driving, braking, and steering the vehicle in a safe and productive manner.
Report
Share
Report
Share
Download to read offline
Recommended
14 engine cooling
The document discusses engine cooling system components and procedures for servicing them. It includes sections on general information, specifications, lubricants, sealants, special tools, troubleshooting, and procedures for checking the radiator, thermostat, water pump, hoses, and other components. The troubleshooting section provides charts to help diagnose issues like fans not operating or changing speed correctly.
50 Tips for Saving Energy_refrigeration_web_r2
This document provides 50 low- and no-cost tips for improving the energy efficiency of industrial refrigeration systems through optimizing operations and maintenance. As the largest energy consumers, refrigeration systems should be a major target for savings. The tips are organized into sections on evaporator opportunities, compressor opportunities, evaporative condenser opportunities, and more. Implementing the tips can help reduce energy costs with little to no capital investment through activities like cleaning coils, adjusting pressure regulators, solving compressor issues, and ensuring proper condenser operations. Safety precautions are recommended, as improper implementation could cause harm.
komatsunew upload D155_INTRODUCTION .ppt
The document provides an introduction and overview of the new D155AX-5 bulldozer. Key features of the new model include improved fuel efficiency through optimization of the engine, transmission, and cooling system. It also has lower noise levels, improved ride quality, enhanced electronic controls, and easier maintenance compared to previous models. The new bulldozer is expected to exceed the fuel efficiency of the D8R Series II by 3%.
101213248 diagrama-d6 h
This document provides a chart detailing the locations and connections of various harnesses and components for a machine. It lists over 50 connectors, components, and their schematic and machine locations. Additional information is provided on related service manuals, switch specifications, wire descriptions, and electrical schematic symbols and definitions.
PRESENTACION CURSO DA20. pptx (1).pptx
This document provides information on the Diamond DA 20 C1 aircraft, including:
1. General performance specifications and limitations, such as maximum takeoff weight, airspeed limits, fuel capacity, and engine specifications.
2. Descriptions of key aircraft systems like the flight controls, landing gear, engine, and cockpit controls.
3. Standard operating procedures for taxi, takeoff, landing and other normal flight operations.
4. Emergency procedures for issues like engine failure, electrical fires, and cabin fires.
5. Details on aircraft performance, mass and balance specifications, and the instrument panel layout.
Reavell 20 100 hp water cooled reciprocating compressor
Reavell water-cooled reciprocating compressors from Gardner Denver offer compact designs with minimal installation costs due to anti-vibration mounts that eliminate the need for special foundations. They have enhanced uptime thanks to convenient access for maintenance without major teardowns. The compressors are application flexible and suitable for harsh compression and boosting applications across various industries, handling gases like nitrogen, helium, hydrogen and methane.
Daewoo-Matiz_1999_ES_US_manual_de_taller_3e560463db.pdf
This document provides information on general engine diagnosis and troubleshooting for the Daewoo Matiz engine. It lists common engine issues, probable causes, and recommended corrections. Issues covered include hard starting, lack of power, rough idling, hesitation, surging, detonation, overheating, and poor fuel consumption. For each issue, it identifies potential causes such as problems with the ignition system, fuel system, compression, or other components.
12 h7 sist-electrico-serie-4er (1)
This document provides a summary of the electrical system for a 120H and 135H motor grader, including:
- A schematic showing the location of electrical components and connectors.
- Tables listing electrical components with their schematic and machine locations.
- Diagnostic codes and their descriptions to help troubleshoot issues.
- Specifications for electrical components like senders, resistors, solenoids, and switches.
- Charts identifying wire colors and their associated functions in the electrical system.
Recommended
14 engine cooling
The document discusses engine cooling system components and procedures for servicing them. It includes sections on general information, specifications, lubricants, sealants, special tools, troubleshooting, and procedures for checking the radiator, thermostat, water pump, hoses, and other components. The troubleshooting section provides charts to help diagnose issues like fans not operating or changing speed correctly.
50 Tips for Saving Energy_refrigeration_web_r2
This document provides 50 low- and no-cost tips for improving the energy efficiency of industrial refrigeration systems through optimizing operations and maintenance. As the largest energy consumers, refrigeration systems should be a major target for savings. The tips are organized into sections on evaporator opportunities, compressor opportunities, evaporative condenser opportunities, and more. Implementing the tips can help reduce energy costs with little to no capital investment through activities like cleaning coils, adjusting pressure regulators, solving compressor issues, and ensuring proper condenser operations. Safety precautions are recommended, as improper implementation could cause harm.
komatsunew upload D155_INTRODUCTION .ppt
The document provides an introduction and overview of the new D155AX-5 bulldozer. Key features of the new model include improved fuel efficiency through optimization of the engine, transmission, and cooling system. It also has lower noise levels, improved ride quality, enhanced electronic controls, and easier maintenance compared to previous models. The new bulldozer is expected to exceed the fuel efficiency of the D8R Series II by 3%.
101213248 diagrama-d6 h
This document provides a chart detailing the locations and connections of various harnesses and components for a machine. It lists over 50 connectors, components, and their schematic and machine locations. Additional information is provided on related service manuals, switch specifications, wire descriptions, and electrical schematic symbols and definitions.
PRESENTACION CURSO DA20. pptx (1).pptx
This document provides information on the Diamond DA 20 C1 aircraft, including:
1. General performance specifications and limitations, such as maximum takeoff weight, airspeed limits, fuel capacity, and engine specifications.
2. Descriptions of key aircraft systems like the flight controls, landing gear, engine, and cockpit controls.
3. Standard operating procedures for taxi, takeoff, landing and other normal flight operations.
4. Emergency procedures for issues like engine failure, electrical fires, and cabin fires.
5. Details on aircraft performance, mass and balance specifications, and the instrument panel layout.
Reavell 20 100 hp water cooled reciprocating compressor
Reavell water-cooled reciprocating compressors from Gardner Denver offer compact designs with minimal installation costs due to anti-vibration mounts that eliminate the need for special foundations. They have enhanced uptime thanks to convenient access for maintenance without major teardowns. The compressors are application flexible and suitable for harsh compression and boosting applications across various industries, handling gases like nitrogen, helium, hydrogen and methane.
Daewoo-Matiz_1999_ES_US_manual_de_taller_3e560463db.pdf
This document provides information on general engine diagnosis and troubleshooting for the Daewoo Matiz engine. It lists common engine issues, probable causes, and recommended corrections. Issues covered include hard starting, lack of power, rough idling, hesitation, surging, detonation, overheating, and poor fuel consumption. For each issue, it identifies potential causes such as problems with the ignition system, fuel system, compression, or other components.
12 h7 sist-electrico-serie-4er (1)
This document provides a summary of the electrical system for a 120H and 135H motor grader, including:
- A schematic showing the location of electrical components and connectors.
- Tables listing electrical components with their schematic and machine locations.
- Diagnostic codes and their descriptions to help troubleshoot issues.
- Specifications for electrical components like senders, resistors, solenoids, and switches.
- Charts identifying wire colors and their associated functions in the electrical system.
Module (s 101) شحن غاز التكييفrefrigerant recovering, vacuuming and gas char...
Module (s 101) شحن غاز التكييفrefrigerant recovering, vacuuming and gas char...Juma Yousef J. Saleh جمعة يوسف جمعة صالح
Refrigeration Cycle. دائرة التكييف
Gauge set and refrigerant عدادات
Installing Gauges.تركيب عداد الغاز
Service ports and valves صمامات الخدمة
Refrigerant Types.أنواع غاز التكييف
Discharging, تفريغ الغاز
Evacuating and شفط الهواء و الرطوبة
Recharging إعادة شحن الغاز
Superheat & Subcooling الغاز المحمص و المبرد.
Pressures of Refrigerants.ضغوط أنواع غازات التكييف
Electronic Refrigerant Identifier Instrument جهاز كشف نوعية غاز التكييفDapc general summarised_241106
The document discusses dynamic annular pressure control (DAPC) technology. DAPC aims to reduce the effects of drilling with overbalanced mud by managing bottom hole pressure at or near the balance point. It does this through an automated system that uses downhole pressure readings, flow rates, and other data to control a standalone backpressure pump. This allows the bottom hole pressure window to be maintained even when rig pumps are off. DAPC has been proven to provide benefits like reducing formation damage, improving hole cleaning and drill rates, lowering mud costs, and reducing non-productive time.
Engine cooling system by Indranil Mandal
This document summarizes the key characteristics and types of engine cooling systems. It discusses that a cooling system works to keep an engine from getting too hot or cool by removing about 30% of the heat generated. There are two main types: liquid cooling systems, which circulate coolant around the engine to absorb heat via convection, and air cooling systems, which use fins and airflow to directly cool the engine. The document outlines the components and functioning of both liquid and air cooling systems, and notes some advantages and disadvantages of each type.
E70 CCB2 Brake system for WAG 9 Locomotive.pptx
MR not building up due to issues with angle cocks, body bogie hoses, or air dryer bypass needing adjustment. BP not charging due to potential issues with cab setup, emergency brake handle position, TPWS cocks, or leaks from emergency exhaust or pneumatic panel. Check relevant isolating cocks, air pressures, cab modes, and fault codes to diagnose and resolve air pressure drops.
Handling of turbine side emergencies
The presentation discuss about the operations, causes and remedies for the facing emergencies of steam Turbines. Specially for the 210MW LMW units. The emergencies can be created on simulator and studied on the simulator ACCORDINGLY.
Clutch & Transmission System.pptx
This document provides an overview of a training module on transmission and clutch systems. The module objectives are to perform basic checks, maintenance, dismantling and assembly of transmissions and clutches. The agenda covers Allison automatic transmissions, ZF manual gearboxes, and clutch system overhauling. Preventive maintenance tips are provided for transmissions, including fluid level checks, fluid and filter changes. Components and operation of Allison transmissions are explained. Practical exercises include identifying gearbox components, checking fluid levels, and removing/refitting a gearbox.
2008 honda ridgeline service repair manual
This document provides troubleshooting steps for common power steering issues in Honda Ridgeline vehicles from 2006-2008. It includes an index of symptoms and corresponding procedures to diagnose the issue. The first section lists specifications for special tools and component locations. The main section details troubleshooting processes for symptoms like hard steering, steering wheel kickback, leaks, and noises. It involves checking fluid levels and pressures, component wear, and performing repairs or overhauls as needed.
2009 honda ridgeline service repair manual
This document provides troubleshooting information for power steering issues in 2006-2008 Honda Ridgelines. It includes an index of steering symptoms and related inspection procedures. It also details specifications for checking power steering components like initial turning load, rotational play, and pump pressure using special tools. Procedures are provided for inspecting the steering linkage, gearbox, rack guide, and other components to diagnose causes of hard steering, noise, vibration and other steering issues.
Eagle burgmann api 682 4th edition piping plans_s-ap4-bkte pdfapp v2 13.05.14_en
Plan 11 involves recirculation from the pump discharge through a flow control orifice into the seal chamber for flushing and cooling. It can be used for clean, non-polymerizing fluids with moderate temperatures. The orifice size must be carefully calculated for high head applications, with a minimum size of 3mm. Various EagleBurgmann seals can be used with this plan.
Api 682 4 th edition piping plans
Api 682 4 th edition piping plansApi 682 4 th edition piping plansApi 682 4 th edition piping plansApi 682 4 th edition piping plansApi 682 4 th edition piping plansApi 682 4 th edition piping plansApi 682 4 th edition piping plansApi 682 4 th edition piping plans
Brake service and maintenance
This document provides an overview of SEW brake components and operation, including:
- The purpose of brakes is to stop or prevent motion by applying friction to slow or stop a rotating object.
- Key brake components include the brake coil, rectifier, springs, discs, and carrier. The coil functions as an electromagnet to engage or release the brake.
- Troubleshooting procedures include checking voltages, resistances, air gaps, and disc wear to diagnose issues like damaged rectifiers, coils, or mechanical locking. Proper lockout/tagout and safety procedures should always be followed.
Air conditioning compressors and service
Automotive Heating and Air Conditioning CHAPTER Automotive Heating and Air Conditioning, 7e James D. Halderman | Tom Birch SEVENTH EDITION Copyright ©
Tonyduramax
This document provides an overview and objectives of a training course on the GM Duramax 6.6L diesel engine. It introduces the instructor and covers topics that will be addressed, including the major components and systems of the engine like the lubrication, cooling, fuel, air intake and exhaust systems. Diagrams and specifications of the engine are presented. Diagnostics procedures using a scan tool are also discussed.
12 Chiller Performance.ppt
The document discusses factors that affect chiller performance, including system design, hardware components, and operational changes. It covers how technologies like heat transfer methods, refrigerant properties, drive trains, and compressor design impact efficiency. Formulas are provided for measuring performance metrics like cooling capacity, power consumption, and comparing to design specifications. Operational elements such as water flow, contamination, and economizers are also reviewed.
OBD2 Powertrain Code List (P0900- P0999)
This document lists OBD-II codes from P0900 to P099F related to transmission and gear shifting components. It includes codes for issues with circuits controlling clutches, gear selectors, hydraulic pressure components, temperature sensors, lock solenoids, shift solenoids and other transmission control systems. The codes are organized by component or system with specific codes indicating open circuits, low/high readings or performance issues.
Jeep liberty 2002 2005 steering
This document provides information on diagnosing and testing steering systems. It describes the components of a typical power steering system and procedures for testing flow and pressure. It discusses common steering issues like noise, binding, and insufficient assistance. The document also covers diagnosing the ignition switch, removing and installing the steering column, intermediate shaft, and steering wheel.
Air conditioning diagnosis service and repair v2
This document provides information on new automotive air conditioning technologies and service procedures. It discusses alternative refrigerants to R134a such as R-1234yf and CO2 due to environmental concerns. R-1234yf is expected to be the most widely adopted replacement for R134a. The document also outlines new SAE specifications for recovery/recharging equipment, leak detectors, and evaporators intended for use with R-1234yf. Proper training and certification will be required for technicians to safely service systems using the new refrigerants.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
More Related Content
Similar to Transmisión boomer 281.pdf
Module (s 101) شحن غاز التكييفrefrigerant recovering, vacuuming and gas char...
Module (s 101) شحن غاز التكييفrefrigerant recovering, vacuuming and gas char...Juma Yousef J. Saleh جمعة يوسف جمعة صالح
Refrigeration Cycle. دائرة التكييف
Gauge set and refrigerant عدادات
Installing Gauges.تركيب عداد الغاز
Service ports and valves صمامات الخدمة
Refrigerant Types.أنواع غاز التكييف
Discharging, تفريغ الغاز
Evacuating and شفط الهواء و الرطوبة
Recharging إعادة شحن الغاز
Superheat & Subcooling الغاز المحمص و المبرد.
Pressures of Refrigerants.ضغوط أنواع غازات التكييف
Electronic Refrigerant Identifier Instrument جهاز كشف نوعية غاز التكييفDapc general summarised_241106
The document discusses dynamic annular pressure control (DAPC) technology. DAPC aims to reduce the effects of drilling with overbalanced mud by managing bottom hole pressure at or near the balance point. It does this through an automated system that uses downhole pressure readings, flow rates, and other data to control a standalone backpressure pump. This allows the bottom hole pressure window to be maintained even when rig pumps are off. DAPC has been proven to provide benefits like reducing formation damage, improving hole cleaning and drill rates, lowering mud costs, and reducing non-productive time.
Engine cooling system by Indranil Mandal
This document summarizes the key characteristics and types of engine cooling systems. It discusses that a cooling system works to keep an engine from getting too hot or cool by removing about 30% of the heat generated. There are two main types: liquid cooling systems, which circulate coolant around the engine to absorb heat via convection, and air cooling systems, which use fins and airflow to directly cool the engine. The document outlines the components and functioning of both liquid and air cooling systems, and notes some advantages and disadvantages of each type.
E70 CCB2 Brake system for WAG 9 Locomotive.pptx
MR not building up due to issues with angle cocks, body bogie hoses, or air dryer bypass needing adjustment. BP not charging due to potential issues with cab setup, emergency brake handle position, TPWS cocks, or leaks from emergency exhaust or pneumatic panel. Check relevant isolating cocks, air pressures, cab modes, and fault codes to diagnose and resolve air pressure drops.
Handling of turbine side emergencies
The presentation discuss about the operations, causes and remedies for the facing emergencies of steam Turbines. Specially for the 210MW LMW units. The emergencies can be created on simulator and studied on the simulator ACCORDINGLY.
Clutch & Transmission System.pptx
This document provides an overview of a training module on transmission and clutch systems. The module objectives are to perform basic checks, maintenance, dismantling and assembly of transmissions and clutches. The agenda covers Allison automatic transmissions, ZF manual gearboxes, and clutch system overhauling. Preventive maintenance tips are provided for transmissions, including fluid level checks, fluid and filter changes. Components and operation of Allison transmissions are explained. Practical exercises include identifying gearbox components, checking fluid levels, and removing/refitting a gearbox.
2008 honda ridgeline service repair manual
This document provides troubleshooting steps for common power steering issues in Honda Ridgeline vehicles from 2006-2008. It includes an index of symptoms and corresponding procedures to diagnose the issue. The first section lists specifications for special tools and component locations. The main section details troubleshooting processes for symptoms like hard steering, steering wheel kickback, leaks, and noises. It involves checking fluid levels and pressures, component wear, and performing repairs or overhauls as needed.
2009 honda ridgeline service repair manual
This document provides troubleshooting information for power steering issues in 2006-2008 Honda Ridgelines. It includes an index of steering symptoms and related inspection procedures. It also details specifications for checking power steering components like initial turning load, rotational play, and pump pressure using special tools. Procedures are provided for inspecting the steering linkage, gearbox, rack guide, and other components to diagnose causes of hard steering, noise, vibration and other steering issues.
Eagle burgmann api 682 4th edition piping plans_s-ap4-bkte pdfapp v2 13.05.14_en
Plan 11 involves recirculation from the pump discharge through a flow control orifice into the seal chamber for flushing and cooling. It can be used for clean, non-polymerizing fluids with moderate temperatures. The orifice size must be carefully calculated for high head applications, with a minimum size of 3mm. Various EagleBurgmann seals can be used with this plan.
Api 682 4 th edition piping plans
Api 682 4 th edition piping plansApi 682 4 th edition piping plansApi 682 4 th edition piping plansApi 682 4 th edition piping plansApi 682 4 th edition piping plansApi 682 4 th edition piping plansApi 682 4 th edition piping plansApi 682 4 th edition piping plans
Brake service and maintenance
This document provides an overview of SEW brake components and operation, including:
- The purpose of brakes is to stop or prevent motion by applying friction to slow or stop a rotating object.
- Key brake components include the brake coil, rectifier, springs, discs, and carrier. The coil functions as an electromagnet to engage or release the brake.
- Troubleshooting procedures include checking voltages, resistances, air gaps, and disc wear to diagnose issues like damaged rectifiers, coils, or mechanical locking. Proper lockout/tagout and safety procedures should always be followed.
Air conditioning compressors and service
Automotive Heating and Air Conditioning CHAPTER Automotive Heating and Air Conditioning, 7e James D. Halderman | Tom Birch SEVENTH EDITION Copyright ©
Tonyduramax
This document provides an overview and objectives of a training course on the GM Duramax 6.6L diesel engine. It introduces the instructor and covers topics that will be addressed, including the major components and systems of the engine like the lubrication, cooling, fuel, air intake and exhaust systems. Diagrams and specifications of the engine are presented. Diagnostics procedures using a scan tool are also discussed.
12 Chiller Performance.ppt
The document discusses factors that affect chiller performance, including system design, hardware components, and operational changes. It covers how technologies like heat transfer methods, refrigerant properties, drive trains, and compressor design impact efficiency. Formulas are provided for measuring performance metrics like cooling capacity, power consumption, and comparing to design specifications. Operational elements such as water flow, contamination, and economizers are also reviewed.
OBD2 Powertrain Code List (P0900- P0999)
This document lists OBD-II codes from P0900 to P099F related to transmission and gear shifting components. It includes codes for issues with circuits controlling clutches, gear selectors, hydraulic pressure components, temperature sensors, lock solenoids, shift solenoids and other transmission control systems. The codes are organized by component or system with specific codes indicating open circuits, low/high readings or performance issues.
Jeep liberty 2002 2005 steering
This document provides information on diagnosing and testing steering systems. It describes the components of a typical power steering system and procedures for testing flow and pressure. It discusses common steering issues like noise, binding, and insufficient assistance. The document also covers diagnosing the ignition switch, removing and installing the steering column, intermediate shaft, and steering wheel.
Air conditioning diagnosis service and repair v2
This document provides information on new automotive air conditioning technologies and service procedures. It discusses alternative refrigerants to R134a such as R-1234yf and CO2 due to environmental concerns. R-1234yf is expected to be the most widely adopted replacement for R134a. The document also outlines new SAE specifications for recovery/recharging equipment, leak detectors, and evaporators intended for use with R-1234yf. Proper training and certification will be required for technicians to safely service systems using the new refrigerants.
Similar to Transmisión boomer 281.pdf (17)
Module (s 101) شحن غاز التكييفrefrigerant recovering, vacuuming and gas char...
Module (s 101) شحن غاز التكييفrefrigerant recovering, vacuuming and gas char...
Eagle burgmann api 682 4th edition piping plans_s-ap4-bkte pdfapp v2 13.05.14_en
Eagle burgmann api 682 4th edition piping plans_s-ap4-bkte pdfapp v2 13.05.14_en
Recently uploaded
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Heap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTS
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
一比一原版(UC Berkeley毕业证)加利福尼亚大学|伯克利分校毕业证成绩单专业办理
UC Berkeley毕业证原版定制【微信：176555708】【加利福尼亚大学|伯克利分校毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
在线办理(ANU毕业证书)澳洲国立大学毕业证录取通知书一模一样
学校原件一模一样【微信：741003700 】《(ANU毕业证书)澳洲国立大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Adaptive synchronous sliding control for a robot manipulator based on neural ...
Robot manipulators have become important equipment in production lines, medical fields, and transportation. Improving the quality of trajectory tracking for
robot hands is always an attractive topic in the research community. This is a
challenging problem because robot manipulators are complex nonlinear systems
and are often subject to fluctuations in loads and external disturbances. This
article proposes an adaptive synchronous sliding control scheme to improve trajectory tracking performance for a robot manipulator. The proposed controller
ensures that the positions of the joints track the desired trajectory, synchronize
the errors, and significantly reduces chattering. First, the synchronous tracking
errors and synchronous sliding surfaces are presented. Second, the synchronous
tracking error dynamics are determined. Third, a robust adaptive control law is
designed,the unknown components of the model are estimated online by the neural network, and the parameters of the switching elements are selected by fuzzy
logic. The built algorithm ensures that the tracking and approximation errors
are ultimately uniformly bounded (UUB). Finally, the effectiveness of the constructed algorithm is demonstrated through simulation and experimental results.
Simulation and experimental results show that the proposed controller is effective with small synchronous tracking errors, and the chattering phenomenon is
significantly reduced.
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Dynamic Programming
Backtracking
Techniques for Graphs
Branch and Bound
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
Recently uploaded (20)
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Heap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTS
Heap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTS
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Adaptive synchronous sliding control for a robot manipulator based on neural ...
Adaptive synchronous sliding control for a robot manipulator based on neural ...
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
Transmisión boomer 281.pdf
- 1. ATLAS COPCO PRODUCT TRAINING Driving -Brake and Steering
- 2. COMMITTED TO SUSTAINABLE PRODUCTIVITY We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call – Sustainable Productivity.
- 3. DRIVING ▪ Diagrams and Drawings – Hydraulics References in documentation
- 4. DRIVING ▪ Red – pressure ▪ Blue – tank/return ▪ Green – pilot pressure (25bar) ▪ Yellow – other pilot pressure Hydraulic diagram legend
- 5. 2 1 3 4 5 6 7 8 9 10 11 12 BOOMER B281 Component location
- 6. 6 Starting the diesel engine
- 7. Starting the diesel engine
- 8. Pressurizing the system – Gear Neutral The whole system will be pressurized with 25 bar The displacement on the tramming pump is zero The tramming Motors's displacement is regulated to its minimum displacement.
- 9. Tramming forward 1st. Gear
- 10. Tramming backward 2nd. Gear
- 11. 11 Function tramming system Protecting devices Cut off valve Shock valves
- 12. CHARGING/LOADING AT 125 BAR 12 Pressure is less than 125Bar
- 13. CHARGING AND STEERING AT 125 BAR 13 Pressure is between125Bar and 150 Bar
- 14. UNLOADING AT 150 BAR 14 Pressure is bigger than 150 Bar
- 15. APPLYING THE SERVICE BRAKES 15 Press brake pedal
- 16. 16 RELEASING THE SERVICE BRAKE Releasing brake pedal
- 17. 17 PARKING BRAKE
- 20. 20 STEERING
- 21. TRACTION ▪ Be aware of: – The components in the brake and steering circuit – How the circuit is started hydraulically – How the brake and steering circuit works Knowledge target for this section