Topological sort
•Download as PPTX, PDF•
1 like•205 views
This document discusses algorithms for analyzing direct acyclic graphs and precedence constraint graphs. It covers topological sorting of graphs to determine an ordering of vertices where all directed edges point from earlier to later vertices in the ordering. The document also examines using topological sorting to find strongly connected components in a graph.
Report
Share
Report
Share
Recommended
Topoloical sort
This document discusses topological sorting of graphs. It defines a graph as consisting of vertices and edges. A topological sort orders the vertices of a directed acyclic graph (DAG) such that if there is an edge from vertex u to vertex v, u comes before v in the ordering. The algorithm computes indegrees of vertices, selects vertices with indegree 0, removes them and updates indegrees until all vertices are ordered. Topological sorting has applications in job scheduling, spreadsheet formula evaluation, logic synthesis, data serialization, and build systems.
Topological sort
Topological Sort Presentation.
Watch my videos on snack here: --> --> http://sck.io/x-B1f0Iy
@ Kindly Follow my Instagram Page to discuss about your mental health problems-
-----> https://instagram.com/mentality_streak?utm_medium=copy_link
@ Appreciate my work:
-----> behance.net/burhanahmed1
Thank-you !
Applied Design Patterns - A Compiler Case Study
This presentation was made in Agile and Automation Conclave 2018 in Bangalore by Ganesh from CodeOps.
"Most developers are aware about design patterns. The difficulty is not in understanding them but in getting an intuitive understanding of when and how to apply them. In this session, we'll go through a case study of how a compiler codebase may implement different design patterns. Links to related code in Java and C# will be provided. (Note: No prior exposure to compilers needed for attending this session.)"
2.8.2 Parallelograms
The document discusses properties of parallelograms. It defines a parallelogram as a quadrilateral with two pairs of parallel sides. The key properties outlined are: opposite sides of a parallelogram are congruent; opposite angles of a parallelogram are congruent; consecutive angles of a parallelogram are supplementary; and the diagonals of a parallelogram bisect each other. Examples are also provided to solve equations using properties of parallelograms.
9.2 Parallelograms
The document discusses properties of parallelograms. It defines a parallelogram as a quadrilateral with two pairs of parallel sides. The key properties are that opposite sides are congruent, opposite angles are congruent, and consecutive angles are supplementary. Examples are provided to demonstrate using these properties to solve for unknown variables.
머신 러닝 기초 - 회귀 및 분류 (Basic of ML - Regression and Classification)
This document provides an overview of basic machine learning concepts including regression, logistic classification, and softmax classification. It introduces linear regression for predicting a continuous output variable, logistic regression for binary classification problems, and softmax classification for multi-class classification problems. Key aspects covered include the hypothesis, cost function, and using gradient descent to minimize the cost function for each of these machine learning algorithms.
Lecture01
This document discusses algorithms and provides an outline for a course on algorithms. It begins by explaining the origin of the word "algorithm" and providing an informal definition. It then discusses why algorithms are important to study and outlines topics that will be covered in the course, including models of computation and criteria for analyzing algorithms. The course aims to introduce fundamental algorithmic concepts.
Dijekstra
This document discusses shortest path algorithms for graphs, including Dijkstra's algorithm. It focuses on finding the shortest paths between nodes in a graph, even when edge weights are negative. Dijkstra's algorithm is presented as a method for computing shortest paths with negative edge weights.
Recommended
Topoloical sort
This document discusses topological sorting of graphs. It defines a graph as consisting of vertices and edges. A topological sort orders the vertices of a directed acyclic graph (DAG) such that if there is an edge from vertex u to vertex v, u comes before v in the ordering. The algorithm computes indegrees of vertices, selects vertices with indegree 0, removes them and updates indegrees until all vertices are ordered. Topological sorting has applications in job scheduling, spreadsheet formula evaluation, logic synthesis, data serialization, and build systems.
Topological sort
Topological Sort Presentation.
Watch my videos on snack here: --> --> http://sck.io/x-B1f0Iy
@ Kindly Follow my Instagram Page to discuss about your mental health problems-
-----> https://instagram.com/mentality_streak?utm_medium=copy_link
@ Appreciate my work:
-----> behance.net/burhanahmed1
Thank-you !
Applied Design Patterns - A Compiler Case Study
This presentation was made in Agile and Automation Conclave 2018 in Bangalore by Ganesh from CodeOps.
"Most developers are aware about design patterns. The difficulty is not in understanding them but in getting an intuitive understanding of when and how to apply them. In this session, we'll go through a case study of how a compiler codebase may implement different design patterns. Links to related code in Java and C# will be provided. (Note: No prior exposure to compilers needed for attending this session.)"
2.8.2 Parallelograms
The document discusses properties of parallelograms. It defines a parallelogram as a quadrilateral with two pairs of parallel sides. The key properties outlined are: opposite sides of a parallelogram are congruent; opposite angles of a parallelogram are congruent; consecutive angles of a parallelogram are supplementary; and the diagonals of a parallelogram bisect each other. Examples are also provided to solve equations using properties of parallelograms.
9.2 Parallelograms
The document discusses properties of parallelograms. It defines a parallelogram as a quadrilateral with two pairs of parallel sides. The key properties are that opposite sides are congruent, opposite angles are congruent, and consecutive angles are supplementary. Examples are provided to demonstrate using these properties to solve for unknown variables.
머신 러닝 기초 - 회귀 및 분류 (Basic of ML - Regression and Classification)
This document provides an overview of basic machine learning concepts including regression, logistic classification, and softmax classification. It introduces linear regression for predicting a continuous output variable, logistic regression for binary classification problems, and softmax classification for multi-class classification problems. Key aspects covered include the hypothesis, cost function, and using gradient descent to minimize the cost function for each of these machine learning algorithms.
Lecture01
This document discusses algorithms and provides an outline for a course on algorithms. It begins by explaining the origin of the word "algorithm" and providing an informal definition. It then discusses why algorithms are important to study and outlines topics that will be covered in the course, including models of computation and criteria for analyzing algorithms. The course aims to introduce fundamental algorithmic concepts.
Dijekstra
This document discusses shortest path algorithms for graphs, including Dijkstra's algorithm. It focuses on finding the shortest paths between nodes in a graph, even when edge weights are negative. Dijkstra's algorithm is presented as a method for computing shortest paths with negative edge weights.
Strongly connected components
This document discusses strong components and how they relate to depth-first search (DFS) algorithms. Strong components are maximal subgraphs of a graph where every node is reachable from every other node. DFS can be used to find strong components by running it on the transpose of the original graph and collecting nodes into trees, with each tree representing a strong component.
Lect9 organization
This document discusses different types of computer instructions including register reference instructions, memory reference instructions, and input-output instructions. It describes the control functions and microoperations for register reference instructions which are executed when D7I'T3 is true. Memory reference instructions and an example of the BSA instruction are also mentioned. The input and output processes are defined, noting how input and output flags control the transfer of data between registers and input/output devices. Finally, it states that all input-output instructions have D7=1, I=1, and T3=1 and require the Boolean relation D7IT3 to be true.
Lect14 organization
This document discusses addressing modes in computer organization. It defines addressing modes as rules for interpreting or modifying instruction addresses before referencing operands. Some computers specify the addressing mode directly in instructions, while others use a single code to indicate both operation and addressing mode. The advantages of addressing modes are to provide programming versatility through pointers, counters, and indexing, and to reduce the number of bits needed for instruction addresses. The document then describes nine common addressing modes including implied, immediate, register, register indirect, direct, indirect, relative, indexed, and base register addressing.
Dfs 3
This document discusses depth-first search (DFS) algorithms and different data structures used to represent DFS including time stamp structure, tree structure, and parenthesis structure. It focuses on DFS time stamp structure, mentioning this structure multiple times as a way to represent information discovered through depth-first search.
Lect5 organization
The document discusses the basic components of a computer's organization and design. It describes how a program is a set of instructions that specify the processing sequence. An instruction code is divided into an operation code and operand. The operation code defines the operation like ADD or SUB, while the operand is the data it acts on. It also discusses addressing modes like immediate, direct, and indirect addressing. The document lists the basic computer registers and their functions for manipulating and holding data and addresses. It describes the data transfer process between memory, registers, and the bus.
Minimum spanning trees
This document discusses algorithms related to strong components, depth-first search, minimum spanning trees, and generic approaches. It covers these topics at a high level without providing details on specific algorithms or implementations.
Floyd warshal 2
The document is about the Floyd-Warshall algorithm, which is repeated over 20 times. The Floyd-Warshall algorithm is an algorithm for finding shortest paths in a weighted graph. It improves on Dijkstra's algorithm by finding shortest paths between all pairs of vertices instead of just from a single source vertex selected in advance.
Bfs and dfs
This document discusses algorithms for finding shortest paths and traversing connected graphs. It covers breadth-first search and depth-first search algorithms, which are used to traverse graphs in different ways. Breadth-first search prioritizes exploring nodes closest to the starting node, while depth-first search explores nodes as far as possible along each branch before backtracking. The document also presents a generic graph traversal algorithm that can be adapted for either search approach.
Lecture02
Running time analysis evaluates the efficiency of algorithms by analyzing how the number of steps required to solve a problem grows as the input size grows. It considers the order of growth or time complexity of an algorithm, often expressed using Big O notation, to determine how efficiently the algorithm will scale to larger problem sizes. The most efficient algorithms have the slowest growth rates as input size increases.
Lect7 organization
This document discusses computer organization and control. It describes two types of control organization: hardwired control and microprogrammed control. Hardwired control implements logic with gates and circuits, allowing for fast operation but requiring wiring changes for modifications. Microprogrammed control stores control information in a memory that can be updated, allowing easier changes but slower execution. Block diagrams and a timing diagram are provided to illustrate the hardwired control unit.
Mst 2
This document discusses algorithms for finding minimum spanning trees and presents a generic greedy approach. It provides multiple proofs that the greedy algorithm always finds a minimum spanning tree by sequentially connecting components with the cheapest available edge while ensuring no cycles are formed.
Lect8 organization
The document discusses the phases of an instruction cycle in a basic computer, including fetching an instruction from memory, decoding the instruction, reading the effective address from memory if indirect, and executing the instruction. It also describes the microoperations for fetching and decoding instructions, including loading the program counter with the first instruction address and incrementing the sequence counter to provide timing signals. The types of instructions are determined and subdivided into four paths.
Lect6 organization
1. The document discusses the basic types of computer instructions that must be included: arithmetic/logical/shift instructions, data transfer instructions, program control instructions, and input/output instructions.
2. It explains the formats of basic computer instructions, including memory reference instructions that use 12 bits to specify the address mode as direct or indirect.
3. Register reference instructions are recognized by the opcode 111 with a 0 in bit 15, and use the remaining bits to specify an operation on the AC register without a memory operand. Similarly, input-output instructions use the opcode 111 with a 1 in bit 15 and the remaining 12 bits to specify the input-output operation without a memory reference.
Lect10 organization
The document discusses interrupt driven data transfer and program interrupts. It describes how an external device can interrupt the computer when it is ready to transfer data, allowing the computer to momentarily pause its current program. This interrupt driven approach is more efficient than programmed data transfer which wastes computer time checking flags. The document also outlines the microoperations for fetch and decode cycles and interrupt cycles in interrupt driven data transfer, noting how the interrupt enable flip flop (IEN) allows the computer to be interrupted when set to 1.
Greedy algorithm
This document discusses greedy algorithms and their application to optimization problems such as coin change problems. It provides examples of using a greedy approach to count money by selecting the largest coins first, but notes that this can fail in some cases. Dynamic programming solutions are then introduced as alternatives to the greedy algorithm for making change that are guaranteed to find the optimal solution. The complexity of coin change problems is also examined.
Activity selection 2
This document discusses greedy algorithms for activity selection problems. It covers greedy activity selection, proving the correctness of greedy activity selection algorithms, and showing that greedy selection provides an optimal solution for activity selection problems. The document focuses on explaining greedy algorithms for activity selection and establishing that greedy selection finds the best set of non-conflicting activities.
Complexity theory 3
This document discusses algorithms and reductions between computational problems. It covers reductions between problems like 3-colorability and clique cover, and how these reductions show relationships between problems. It also discusses NP-completeness, Cook's theorem, and how Boolean satisfiability was the first problem shown to be NP-complete. Finally, it mentions ways to cope with NP-complete problems, including approximations and heuristics.
Lect13 organization
This document discusses different types of computer organization and instruction formats. It covers single accumulator, general register, and stack organizations. It also discusses one, two, three, and zero address instruction formats. Finally, it describes the characteristics of RISC instruction sets, providing an example of a RISC instruction for the operation X=(A+B)*(C+D).
Lect11 organization
This document describes the internal organization and logic circuits of a computer system using a register transfer language. It includes:
1) A table summarizing the control functions and micro-operations for the entire computer. This describes the internal organization and allows designing the computer's logic circuits.
2) Examples of register transfer statements and control functions/conditional statements that formulate the control unit's Boolean functions.
3) A list of micro-operations specifying the types of control inputs needed for registers and memory.
4) Diagrams showing the control logic for flip-flops and buses, the accumulator logic, and an adder/logic circuit stage.
5) Examples of exercises analyzing register transfers and microoperations in the system
Cis cvs risc
This document compares and contrasts the architectures of traditional CISC machines like VAX and Pentium Pro with RISC machines like UltraSPARC and Cray T3E. It discusses their memory, registers, data formats, instruction formats, addressing modes, instruction sets, and input/output. The VAX uses variable length instructions and has many addressing modes, while the Pentium Pro has a large instruction set. UltraSPARC and Cray T3E are RISC machines with fewer instructions that are register-to-register and fixed length.
Lect12 organization
The document discusses the central processing unit (CPU) and its major components: the control unit, arithmetic logic unit (ALU), and register set. It also covers general register organization and bus connections, as well as stack organization using a stack pointer and the push and pop operations. Finally, it describes reverse polish notation and how stacks can be used to evaluate arithmetic expressions in this notation.
More Related Content
Viewers also liked
Strongly connected components
This document discusses strong components and how they relate to depth-first search (DFS) algorithms. Strong components are maximal subgraphs of a graph where every node is reachable from every other node. DFS can be used to find strong components by running it on the transpose of the original graph and collecting nodes into trees, with each tree representing a strong component.
Lect9 organization
This document discusses different types of computer instructions including register reference instructions, memory reference instructions, and input-output instructions. It describes the control functions and microoperations for register reference instructions which are executed when D7I'T3 is true. Memory reference instructions and an example of the BSA instruction are also mentioned. The input and output processes are defined, noting how input and output flags control the transfer of data between registers and input/output devices. Finally, it states that all input-output instructions have D7=1, I=1, and T3=1 and require the Boolean relation D7IT3 to be true.
Lect14 organization
This document discusses addressing modes in computer organization. It defines addressing modes as rules for interpreting or modifying instruction addresses before referencing operands. Some computers specify the addressing mode directly in instructions, while others use a single code to indicate both operation and addressing mode. The advantages of addressing modes are to provide programming versatility through pointers, counters, and indexing, and to reduce the number of bits needed for instruction addresses. The document then describes nine common addressing modes including implied, immediate, register, register indirect, direct, indirect, relative, indexed, and base register addressing.
Dfs 3
This document discusses depth-first search (DFS) algorithms and different data structures used to represent DFS including time stamp structure, tree structure, and parenthesis structure. It focuses on DFS time stamp structure, mentioning this structure multiple times as a way to represent information discovered through depth-first search.
Lect5 organization
The document discusses the basic components of a computer's organization and design. It describes how a program is a set of instructions that specify the processing sequence. An instruction code is divided into an operation code and operand. The operation code defines the operation like ADD or SUB, while the operand is the data it acts on. It also discusses addressing modes like immediate, direct, and indirect addressing. The document lists the basic computer registers and their functions for manipulating and holding data and addresses. It describes the data transfer process between memory, registers, and the bus.
Minimum spanning trees
This document discusses algorithms related to strong components, depth-first search, minimum spanning trees, and generic approaches. It covers these topics at a high level without providing details on specific algorithms or implementations.
Floyd warshal 2
The document is about the Floyd-Warshall algorithm, which is repeated over 20 times. The Floyd-Warshall algorithm is an algorithm for finding shortest paths in a weighted graph. It improves on Dijkstra's algorithm by finding shortest paths between all pairs of vertices instead of just from a single source vertex selected in advance.
Bfs and dfs
This document discusses algorithms for finding shortest paths and traversing connected graphs. It covers breadth-first search and depth-first search algorithms, which are used to traverse graphs in different ways. Breadth-first search prioritizes exploring nodes closest to the starting node, while depth-first search explores nodes as far as possible along each branch before backtracking. The document also presents a generic graph traversal algorithm that can be adapted for either search approach.
Lecture02
Running time analysis evaluates the efficiency of algorithms by analyzing how the number of steps required to solve a problem grows as the input size grows. It considers the order of growth or time complexity of an algorithm, often expressed using Big O notation, to determine how efficiently the algorithm will scale to larger problem sizes. The most efficient algorithms have the slowest growth rates as input size increases.
Lect7 organization
This document discusses computer organization and control. It describes two types of control organization: hardwired control and microprogrammed control. Hardwired control implements logic with gates and circuits, allowing for fast operation but requiring wiring changes for modifications. Microprogrammed control stores control information in a memory that can be updated, allowing easier changes but slower execution. Block diagrams and a timing diagram are provided to illustrate the hardwired control unit.
Mst 2
This document discusses algorithms for finding minimum spanning trees and presents a generic greedy approach. It provides multiple proofs that the greedy algorithm always finds a minimum spanning tree by sequentially connecting components with the cheapest available edge while ensuring no cycles are formed.
Lect8 organization
The document discusses the phases of an instruction cycle in a basic computer, including fetching an instruction from memory, decoding the instruction, reading the effective address from memory if indirect, and executing the instruction. It also describes the microoperations for fetching and decoding instructions, including loading the program counter with the first instruction address and incrementing the sequence counter to provide timing signals. The types of instructions are determined and subdivided into four paths.
Lect6 organization
1. The document discusses the basic types of computer instructions that must be included: arithmetic/logical/shift instructions, data transfer instructions, program control instructions, and input/output instructions.
2. It explains the formats of basic computer instructions, including memory reference instructions that use 12 bits to specify the address mode as direct or indirect.
3. Register reference instructions are recognized by the opcode 111 with a 0 in bit 15, and use the remaining bits to specify an operation on the AC register without a memory operand. Similarly, input-output instructions use the opcode 111 with a 1 in bit 15 and the remaining 12 bits to specify the input-output operation without a memory reference.
Lect10 organization
The document discusses interrupt driven data transfer and program interrupts. It describes how an external device can interrupt the computer when it is ready to transfer data, allowing the computer to momentarily pause its current program. This interrupt driven approach is more efficient than programmed data transfer which wastes computer time checking flags. The document also outlines the microoperations for fetch and decode cycles and interrupt cycles in interrupt driven data transfer, noting how the interrupt enable flip flop (IEN) allows the computer to be interrupted when set to 1.
Greedy algorithm
This document discusses greedy algorithms and their application to optimization problems such as coin change problems. It provides examples of using a greedy approach to count money by selecting the largest coins first, but notes that this can fail in some cases. Dynamic programming solutions are then introduced as alternatives to the greedy algorithm for making change that are guaranteed to find the optimal solution. The complexity of coin change problems is also examined.
Activity selection 2
This document discusses greedy algorithms for activity selection problems. It covers greedy activity selection, proving the correctness of greedy activity selection algorithms, and showing that greedy selection provides an optimal solution for activity selection problems. The document focuses on explaining greedy algorithms for activity selection and establishing that greedy selection finds the best set of non-conflicting activities.
Complexity theory 3
This document discusses algorithms and reductions between computational problems. It covers reductions between problems like 3-colorability and clique cover, and how these reductions show relationships between problems. It also discusses NP-completeness, Cook's theorem, and how Boolean satisfiability was the first problem shown to be NP-complete. Finally, it mentions ways to cope with NP-complete problems, including approximations and heuristics.
Lect13 organization
This document discusses different types of computer organization and instruction formats. It covers single accumulator, general register, and stack organizations. It also discusses one, two, three, and zero address instruction formats. Finally, it describes the characteristics of RISC instruction sets, providing an example of a RISC instruction for the operation X=(A+B)*(C+D).
Lect11 organization
This document describes the internal organization and logic circuits of a computer system using a register transfer language. It includes:
1) A table summarizing the control functions and micro-operations for the entire computer. This describes the internal organization and allows designing the computer's logic circuits.
2) Examples of register transfer statements and control functions/conditional statements that formulate the control unit's Boolean functions.
3) A list of micro-operations specifying the types of control inputs needed for registers and memory.
4) Diagrams showing the control logic for flip-flops and buses, the accumulator logic, and an adder/logic circuit stage.
5) Examples of exercises analyzing register transfers and microoperations in the system
Viewers also liked (20)
More from Maher Alshammari
Cis cvs risc
This document compares and contrasts the architectures of traditional CISC machines like VAX and Pentium Pro with RISC machines like UltraSPARC and Cray T3E. It discusses their memory, registers, data formats, instruction formats, addressing modes, instruction sets, and input/output. The VAX uses variable length instructions and has many addressing modes, while the Pentium Pro has a large instruction set. UltraSPARC and Cray T3E are RISC machines with fewer instructions that are register-to-register and fixed length.
Lect12 organization
The document discusses the central processing unit (CPU) and its major components: the control unit, arithmetic logic unit (ALU), and register set. It also covers general register organization and bus connections, as well as stack organization using a stack pointer and the push and pop operations. Finally, it describes reverse polish notation and how stacks can be used to evaluate arithmetic expressions in this notation.
Lect15 organization
The document discusses different aspects of computer organization including program control, program control instructions, status bit conditions, program interrupts, types of interrupts, CISC and RISC computers. It provides details on how the program counter controls instruction execution flow and how program control instructions can alter this flow. It also describes status bit registers, different types of interrupts including external, internal and software interrupts. Finally, it outlines the key characteristics of CISC and RISC computer architectures.
Lect1 organization 2
This document provides an introduction to computer organization and digital components. It discusses computer organization, architecture, logic gates, combinational and sequential circuits like flip flops. It also summarizes common digital components such as decoders, encoders, multiplexers, demultiplexers, registers, counters, memory units including RAM and ROM. The document is presented over multiple pages and provides definitions and brief descriptions of the key topics and components in computer organization.
Lect4 organization
Shift microoperations are used to serially transfer data and are used with arithmetic, logical, and other data processing units. There are three types of shifts: 1) logical shifts transfer zeros into the shifted bits, 2) circular shifts circulate bits around the two ends of the register, and 3) arithmetic shifts preserve the sign bit during a right shift and insert zeros during a left shift, changing the sign if overflow occurs. The document discusses drawing logic circuits to perform six shift microoperations on a 4-bit register and includes bonus points for detecting overflow.
Lect2 organization 2
The document discusses various microoperations that are performed by the central processing unit of a computer. It describes register transfer language, which uses a symbolic language to define the internal organization of a computer through sequences of microoperations. The main types of microoperations covered are register transfer operations, arithmetic operations, logic operations, and shift operations. Arithmetic microoperations like addition and subtraction are implemented using binary adders and subtractors. Bus and memory transfer microoperations involve transferring data via a shared bus between components using three-state buffers.
Lect3 organization 2
This document discusses logic microoperations which specify binary operations for strings of bits stored in registers. It provides examples of selective set, selective complement, selective clear, mask, and insert operations. These logic microoperations are useful for manipulating individual bits or portions of words stored in registers. The document concludes with two assignment questions involving designing a circuit to perform logic operations on a two bit word and using logic microoperations to change the value stored in a register.
Matrix chain multiplication 2
This document repeatedly discusses chain matrix multiplication, with the term appearing over 25 times. It seems to focus exclusively on the topic of chain matrix multiplication without providing any other details.
Edit distance problem
This document discusses edit distance and its dynamic programming algorithm. Edit distance is a way to quantify how dissimilar two strings are by counting the minimum number of operations (insertions, deletions, substitutions) needed to transform one string into the other. The document presents the dynamic programming formulation and algorithm to solve edit distance in quadratic time and linear space.
Merge sort
This document discusses the merge sort algorithm, which uses a divide and conquer strategy to sort a list of items. It breaks the list into individual items, recursively sorts each sublist, and then merges the sublists back together in a sorted order. The algorithm has a worst-case running time of O(n log n) for a list of length n, making it an efficient sorting algorithm.
Bellman ford and floyd warshal
This document discusses algorithms for finding shortest paths in graphs, including the Bellman-Ford algorithm and Floyd-Warshall algorithm. It covers the correctness of the Bellman-Ford algorithm through multiple iterations and describes how the Floyd-Warshall algorithm can find all-pairs shortest paths in a graph.
Greedy algorithm huffman encoding
The document discusses the greedy algorithm known as Huffman encoding. Huffman encoding is a lossless data compression algorithm that represents characters using binary codes with variable lengths. It assigns shorter codes to more common characters and longer codes to less common characters to minimize the expected code length. The algorithm builds a binary tree from the character frequencies where each leaf node represents a character and the path from the root to the leaf is the code assigned to that character.
More from Maher Alshammari (13)
Recently uploaded
A Brief Introduction About Hadj Ounis
Hadj Ounis's most notable work is his sculpture titled "Metamorphosis." This piece showcases Ounis's mastery of form and texture, as he seamlessly combines metal and wood to create a dynamic and visually striking composition. The juxtaposition of the two materials creates a sense of tension and harmony, inviting viewers to contemplate the relationship between nature and industry.
Fashionista Chic Couture Mazes and Coloring AdventureA
Fashionista Chic Couture Maze & Coloring Adventures is a coloring and activity book filled with many maze games and coloring activities designed to delight and engage young fashion enthusiasts. Each page offers a unique blend of fashion-themed mazes and stylish illustrations to color, inspiring creativity and problem-solving skills in children.
Ealing London Independent Photography meeting - June 2024
Photographs from trip to American Deep South
一比一原版美国亚利桑那大学毕业证（ua毕业证书）如何办理
一模一样【微信：A575476】【美国亚利桑那大学毕业证（ua毕业证书）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版加拿大多伦多大学毕业证（uoft毕业证书）如何办理
一模一样【微信：A575476】【加拿大多伦多大学毕业证（uoft毕业证书）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UniSA毕业证)南澳大学毕业证成绩单如何办理
UniSA毕业证【微信95270640】（南澳大学毕业证高仿学位证书((+《Q微信95270640》))）购买UniSA毕业证修改UniSA成绩单购买南澳大学毕业证办UniSA文凭办高仿毕业证南澳大学毕业证购买修改成绩单挂科退学如何进行学历认证留学退学办毕业证书/ 出国留学无法毕业买毕业证留学被劝退买毕业证（非正常毕业教育部认证咨询） University of South Australia
办国外南澳大学南澳大学毕业证假文凭教育部学历学位认证留信认证大使馆认证留学回国人员证明修改成绩单信封申请学校offer录取通知书在读证明offer letter。
快速办理高仿国外毕业证成绩单：
1南澳大学毕业证+成绩单+留学回国人员证明+教育部学历认证（全套留学回国必备证明材料给父母及亲朋好友一份完美交代）;
2雅思成绩单托福成绩单OFFER在读证明等留学相关材料（申请学校转学甚至是申请工签都可以用到）。
3.毕业证 #成绩单等全套材料从防伪到印刷从水印到钢印烫金高精仿度跟学校原版100%相同。
专业服务请勿犹豫联系我！联系人微信号：95270640诚招代理：本公司诚聘当地代理人员如果你有业余时间有兴趣就请联系我们。
国外南澳大学南澳大学毕业证假文凭办理过程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。让我们的父母幸福快乐地度过一生挽着清风芒耀似金的骄阳如将之绽放的花蕾一般静静的从远方的山峦间缓缓升起这一片寂静的城市默默的等待着它的第一缕光芒将之唤醒那飘散在它前方的几层薄云像是新娘的婚纱一般为它的光芒添上了几分淡淡的浮晕在悄无声息间这熙和的阳光默默的照射在大地上像是母亲的手轻轻抚摸熟睡中的孩子般柔情似水五月的盛夏从这一缕柔情中揭开了第一抹的清香清晨本是繁华喧闹的街道此时只有稀薄的人群围着冒着层聋
In Focus_ The Evolution of Boudoir Photography in NYC.pdf
In Focus_ The Evolution of Boudoir Photography in NYC.pdfBoudoir Photography by Your Hollywood Portrait
Boudoir photography, a genre that captures intimate and sensual images of individuals, has experienced significant transformation over the years, particularly in New York City (NYC). Known for its diversity and vibrant arts scene, NYC has been a hub for the evolution of various art forms, including boudoir photography. This article delves into the historical background, cultural significance, technological advancements, and the contemporary landscape of boudoir photography in NYC.HOW TO USE PINTEREST_by: Clarissa Credito
This tutorial offers a step-by-step guide on how to effectively use Pinterest. It covers the basics such as account creation and navigation, as well as advanced techniques including creating eye-catching pins and optimizing your profile. The tutorial also explores collaboration and networking on the platform. With visual illustrations and clear instructions, this tutorial will equip you with the skills to navigate Pinterest confidently and achieve your goals.
Fed by curiosity and beauty - Remembering Myrsine Zorba
Speech at the conference in the memory of Myrsine Zorba.
Domino Express Storyboard - TV Adv Toys 30"
Storyboard for a tv commercial about a toy "Domino Express"
一比一原版(QUT毕业证)昆士兰科技大学毕业证成绩单如何办理
QUT毕业证【微信95270640】办理QUT毕业证【Q微信95270640】昆士兰科技大学毕业证书原版↑制作昆士兰科技大学学历认证文凭办理昆士兰科技大学留信网认证,留学回国办理毕业证成绩单文凭学历认证【Q微信95270640】专业为海外学子办理毕业证成绩单、文凭制作，学历仿制，回国人员证明、做文凭，研究生、本科、硕士学历认证、留信认证、结业证、学位证书样本、美国教育部认证百分百真实存档可查】
全套服务：昆士兰科技大学昆士兰科技大学毕业证offer真实回国人员证明 #真实教育部认证。让您回国发展信心十足#铸就十年品质！信誉！实体公司！可以视频看办公环境样板如需办理真实可查可以先到公司面谈勿轻信小中介黑作坊！
可以提供昆士兰科技大学钢印 #水印 #烫金 #激光防伪 #凹凸版 #最新版的毕业证 #百分之百让您绝对满意
印刷DHL快递毕业证 #成绩单7个工作日真实大使馆教育部认证1个月。为了达到高水准高效率
请您先以qq或微信的方式对我们的服务进行了解后如果有昆士兰科技大学昆士兰科技大学毕业证offer帮助再进行电话咨询。
国外毕业证学位证成绩单如何办理：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作昆士兰科技大学毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。望着父亲山娃反问道父亲听了并不回答只是吃吃地笑山娃很精神越逛越起劲父亲却越逛越疲倦望着父亲呵欠连天的样子山娃也说困了累了回家吧小屋闷罐一般头顶上的三叶扇彻夜呜呜作响搅得满屋热气腾腾也搅得山娃心烦意乱父亲一上床就呼呼大睡山娃却辗转反侧睡不着山娃一次又一次摸索着爬起来一遍又一遍地用暖乎乎的冷水擦身往水泥地板上一勺一勺的洒水也不知过了多久山娃竟迷迷糊糊地睡着了迷迷糊糊地又闻到了闹钟刺耳的铃声和哐咣的关和
All the images mentioned in 'See What You're Missing'
We've gathered together all of the images mentioned in Will Gompertz's 'See What You're Missing'
Cherries 32 collection of colorful paintings
The cherry: beauty, softness, its heart-shaped plastic has inspired artists since Antiquity. Cherries and strawberries were considered the fruits of paradise and thus represented the souls of men.
哪里购买美国乔治城大学毕业证硕士学位证书原版一模一样
原版一模一样【微信：741003700 】【美国乔治城大学毕业证硕士学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Colour Theory for Painting - Fine Artist.pdf
This document is all about Colour Theory for Fine Artist / Painter.
Recently uploaded (20)
Fashionista Chic Couture Mazes and Coloring AdventureA
Fashionista Chic Couture Mazes and Coloring AdventureA
Ealing London Independent Photography meeting - June 2024
Ealing London Independent Photography meeting - June 2024
In Focus_ The Evolution of Boudoir Photography in NYC.pdf
In Focus_ The Evolution of Boudoir Photography in NYC.pdf
Fed by curiosity and beauty - Remembering Myrsine Zorba
Fed by curiosity and beauty - Remembering Myrsine Zorba
All the images mentioned in 'See What You're Missing'
All the images mentioned in 'See What You're Missing'
Topological sort
- 1. Algorithms
- 2. Design & Analysis of Algorithms
- 12. Topological Sort
- 13. Topological Sort
- 14. Topological Sort
- 15. Topological Sort