The document introduces the ERD, a new low-cost electric rod-style actuator from Tolomatic. It comes in three sizes, with configurable strokes up to 8, 10, and 12 inches and maximum thrusts of 20, 40, and 75 pounds. The ERD is a cost-effective alternative to pneumatic actuators for automating manual processes and general automation. It has configurable options and mounts to NEMA-sized motors.
Tolomatic ERD20 and acs ethernet presentationElectromate
This document summarizes products and services from Electromate, including electric rod-style actuators (ERD), actuator control solutions (ACS), and integrated mechanical actuators (IMA). It provides information on various models of ERD and IMA actuators, control options, applications, and specifications. Electromate offers a complete actuator solution with affordable drives that are easy to use and know the mechanics of the system.
Kollmorgen benefits of direct drive technologyElectromate
Direct drive technology provides three main benefits over traditional mechanical transmission systems: 1) It eliminates compliance between the motor and load, allowing for precise motion control; 2) It is not affected by inertia mismatches between the motor and load; and 3) It has been successfully used in applications with up to 1000:1 inertia mismatches, compared to 10:1 for standard servo systems. Direct drive uses the motor to directly couple and move the load without any gearboxes, belts, or other mechanical interfaces.
Hd Systems LLC actively marketed products 2006Electromate
The document describes various gear component sets and gearheads sold and serviced by Electromate, including CSF, CSG "Quantum", CSD "Ultra Flat", SHF "Silk Hat", SHG "Silk Hat Quantum", HDUF "Pancake", HDUR "Pancake", HDT "T cup", HDB phasing gear set, HDI "Infinit-Indexer", and CSF-2UH gearhead. It provides information on sizes, ratios, torque and life specifications for each product.
Applied Motion Products stm integrated motor product presentation march 2009Electromate
www.electromate.com
The document provides an overview of the STM23 Series stepper motors from Applied Motion Products. It describes that the STM23 has drive electronics mounted directly onto the motor housing, making it a self-contained unit. It then summarizes the various options and part numbering system for the STM23 motors, including frame sizes, control types, stack lengths, communication ports, encoders, and input/output capabilities. The document is intended to educate distributors on the STM23 product line.
Tolomatic presentation understanding motion control technologyElectromate
This document discusses different types of motion control technology including microstepping systems, brushed DC systems, and brushless servo systems. It focuses on encoder feedback, describing open loop and closed loop systems. It also covers feedback devices, stepper motors, and compares the advantages and limitations of stepper motor systems.
The document discusses Electromate's launch of the new MXB-U belt drive product. It provides an overview of belt drive technology and applications, compares the features of the MXB-U to other Electromate belt drive products, and describes the MXB-U's options, sizing software tools, and potential applications. The presentation aims to promote the MXB-U as part of Electromate's wide range of actuator solutions.
This document provides an overview and specifications for Electromate's new MXB-series belt-driven actuators. The MXB series extends Electromate's MX product line with sizes from 16 to 63 and various configuration options. Key features are highlighted, including common components with MX actuators. Pre-production testing is underway to evaluate performance of the new sizes under different load and speed conditions.
Applied Motion Products Product Overview presentation june 2009Electromate
The document discusses Applied Motion Products, Inc. and provides an overview of their stepper motor and drive products. It describes how stepper motors inherently have a resonance problem due to the rotor behaving like a mass on a spring. When the motor takes a step, the rotor settles into position after each step, but this settling can last over a second and cause rough motion or loss of torque and position if not addressed. Applied Motion drives aim to improve smoothness and accuracy by eliminating resonance and adding closed-loop control with encoder feedback.
Tolomatic ERD20 and acs ethernet presentationElectromate
This document summarizes products and services from Electromate, including electric rod-style actuators (ERD), actuator control solutions (ACS), and integrated mechanical actuators (IMA). It provides information on various models of ERD and IMA actuators, control options, applications, and specifications. Electromate offers a complete actuator solution with affordable drives that are easy to use and know the mechanics of the system.
Kollmorgen benefits of direct drive technologyElectromate
Direct drive technology provides three main benefits over traditional mechanical transmission systems: 1) It eliminates compliance between the motor and load, allowing for precise motion control; 2) It is not affected by inertia mismatches between the motor and load; and 3) It has been successfully used in applications with up to 1000:1 inertia mismatches, compared to 10:1 for standard servo systems. Direct drive uses the motor to directly couple and move the load without any gearboxes, belts, or other mechanical interfaces.
Hd Systems LLC actively marketed products 2006Electromate
The document describes various gear component sets and gearheads sold and serviced by Electromate, including CSF, CSG "Quantum", CSD "Ultra Flat", SHF "Silk Hat", SHG "Silk Hat Quantum", HDUF "Pancake", HDUR "Pancake", HDT "T cup", HDB phasing gear set, HDI "Infinit-Indexer", and CSF-2UH gearhead. It provides information on sizes, ratios, torque and life specifications for each product.
Applied Motion Products stm integrated motor product presentation march 2009Electromate
www.electromate.com
The document provides an overview of the STM23 Series stepper motors from Applied Motion Products. It describes that the STM23 has drive electronics mounted directly onto the motor housing, making it a self-contained unit. It then summarizes the various options and part numbering system for the STM23 motors, including frame sizes, control types, stack lengths, communication ports, encoders, and input/output capabilities. The document is intended to educate distributors on the STM23 product line.
Tolomatic presentation understanding motion control technologyElectromate
This document discusses different types of motion control technology including microstepping systems, brushed DC systems, and brushless servo systems. It focuses on encoder feedback, describing open loop and closed loop systems. It also covers feedback devices, stepper motors, and compares the advantages and limitations of stepper motor systems.
The document discusses Electromate's launch of the new MXB-U belt drive product. It provides an overview of belt drive technology and applications, compares the features of the MXB-U to other Electromate belt drive products, and describes the MXB-U's options, sizing software tools, and potential applications. The presentation aims to promote the MXB-U as part of Electromate's wide range of actuator solutions.
This document provides an overview and specifications for Electromate's new MXB-series belt-driven actuators. The MXB series extends Electromate's MX product line with sizes from 16 to 63 and various configuration options. Key features are highlighted, including common components with MX actuators. Pre-production testing is underway to evaluate performance of the new sizes under different load and speed conditions.
Applied Motion Products Product Overview presentation june 2009Electromate
The document discusses Applied Motion Products, Inc. and provides an overview of their stepper motor and drive products. It describes how stepper motors inherently have a resonance problem due to the rotor behaving like a mass on a spring. When the motor takes a step, the rotor settles into position after each step, but this settling can last over a second and cause rough motion or loss of torque and position if not addressed. Applied Motion drives aim to improve smoothness and accuracy by eliminating resonance and adding closed-loop control with encoder feedback.
This document discusses gearbox and coupling solutions from GAM that can improve machine performance while reducing costs. It describes several gearbox and coupling product lines - including the Dyna, JPG, and Linear Mount series - and highlights benefits like fewer components, higher torque and speed capabilities, precision, and integrated output coupling options. The document encourages contacting Electromate for customized solutions.
The document introduces the MXB product line of actuators from Electromate. It provides details on the features, options, specifications, and comparisons to other actuators. Key information includes sizes ranging from 16mm to 63mm, IP protection ratings, load and moment capabilities, reduction drive options, and how to order an MXB actuator.
Nippon Pulse high precision linear motion made simple presentation 2009Electromate
This document provides information about linear shaft motors from Oriental Motor. It describes linear shaft motors as brushless linear motors that provide high precision linear motion. It discusses their advantages over other linear motion systems, including high efficiency and output. It also outlines Oriental Motor's linear shaft motor product lineup and specifications, applications, and selection guidelines.
Nippon Pulse high precision linear motion made simple presentation oct. 2009 Electromate
The document provides information about linear shaft motors from Oriental Motor. It discusses the structure, advantages, and specifications of linear shaft motors. Key points include that linear shaft motors have a coreless design with no iron in the stator or rotor, providing benefits like no cogging, stiffness, and a non-critical large air gap. Specifications like force, velocity, and acceleration are discussed. Applications include semiconductor manufacturing equipment and medical devices.
Haydon Kerk basic product training 2009.Electromate
Stepper motors are useful for positioning applications because they move a set amount of rotation for each input pulse. Can-stack motors move 7.5 or 15 degrees per pulse, while hybrid motors move 0.9 or 1.8 degrees per pulse. This precise stepping motion allows stepper motors to accurately control position.
GAM was founded in 1990 and brought the Jakob coupling to North America. It has since grown to have 25% of the market share for bellows couplings and launched its first in-house gear product in 2004. The company produces a wide range of gearboxes, couplings, and customized engineered solutions for motion control applications.
MicroE Systems mercury ii product presentationElectromate
The document provides information on Mercury II encoder models from MicroE Systems including the MII6000, MII5000, MII1900, MII1600, linear glass scales, rotary glass scales, and metal tape scales. Key features outlined are resolutions from 5um to 1.2nm, quadrature or serial word outputs, speeds up to 10m/s, programmable features, and small sensor sizes. Application areas include servo motor feedback. The encoders go through extensive testing and qualification.
MicroE Systems mercury i product presentationElectromate
The Mercury encoder family provides various analog and digital encoder options. Key features include single laser optical configuration, compatibility with linear and rotary scales, and modular design that allows pairing any sensor with any grating. Models include analog sensors, quadrature sensors with interpolation built into the head, and programmable quadrature and serial word output options. Vacuum compatible versions are available for most models. The encoders offer high resolution, wide index windows, and small sensor heads with broad alignment tolerances.
The webinar covered AMC's new single phase, DZ, and AZ product expansions. For single phase, 12 new DP drives were introduced with single phase input. The DZ expansion increased power ranges up to 60A and added extended temperature models. The AZ expansion added high voltage models up to 175V with currents from 6A to 25A. New mounting cards were also discussed.
The document introduces two new digital power amplifiers from NuVo - the D2120 and D460. The D2120 has 2 channels that each produce 120 watts of power, while the D460 has 4 channels producing 60 watts each. Both models offer selectable speaker impedance, light and compact design, multiple power triggers, and high energy efficiency in standby mode. The amplifiers are suitable for powering large rooms, outdoor areas, or zones in a home audio system.
The CP-700 preamplifier from Classe Audio offers high performance audio playback through its fully-balanced circuitry implemented symmetrically to reduce noise and distortion. It achieves excellent frequency response and low distortion through the use of an outboard power supply. The CP-700 provides both balanced and single-ended inputs that are each handled differentially, and it offers simple control through a touchscreen, RS-232, and IR remote.
This document provides information on the E Series NV Uninterruptible Power Supply (UPS) from Eaton, including:
- The E Series NV UPS provides power protection for personal computers and peripherals from 600VA to 2000VA with automatic voltage regulation and surge protection.
- Features include automatic voltage regulation, microprocessor control, multiple output receptacles, user replaceable batteries, and software for monitoring power conditions.
- Technical specifications are provided for five models varying in wattage, dimensions, weight, and number of output receptacles.
Power transmission _distribution_line_trainer_tl_04_26Aidil Ab Gani
This document describes equipment for assembling a 380kV power transmission system model for investigating various operating conditions including no load operation, symmetrical and unsymmetrical short circuits, and parallel and series compensation of the transmission line. The system includes components like a transformer, transmission line model, circuit breaker, compensation equipment and loads that can be used to perform experiments.
The document is a printable price list from www.onlineTPS.com, an electronics and robotics components shop in India. It lists 955 products across multiple categories like batteries, motors, propellers, radio controllers, assembled kits, enclosures, cables, connectors, and sockets. The price list is 33 pages long and provides item names, product codes, and basic information for each listed product.
Advanced Motion Controls new product presentation august 2010Electromate
The document provides an update on Electromate's 2010 product line. It summarizes new and updated servo drive products, including larger AZ drives up to 40 amps, 200V DC platforms for AZ drives, and Ethernet connectivity for DZ drives. It also outlines the features and functionality of Electromate's AZ plug-in analog servo drives and DZ plug-in digital servo drives, and provides power ranges for the AZ and DZ series.
Draka - Mobile networks 10-2010 cable products kaapelituotteetAerial Oy
This document provides information on Draka's mobile network cable products, including feeder cables, coaxial antennas, superflexible cables, and jumpers. It describes Draka as a reliable cable supplier and lists their product range and specifications. Key details are provided on specific feeder cable models like the RFA 1/4"-50, including construction, electrical characteristics, attenuation values, and drum specifications. The document aims to demonstrate Draka's capabilities in supplying high quality cables and accessories for mobile telecommunication networks.
The document describes the UHP-Black-LED-630, a fiber coupled ultra high power LED light source produced by Prizmatix. It provides over 400mW of continuous power at the fiber output, around 10 times more powerful than similar high power LED devices. It can be used for applications like fluorescence microscopy and machine vision. The LED has a wavelength of 630nm and comes with options for fiber connection type and accessories like fiber bundles and collimators.
The 9730 Series is a 2 or 4 channel digital delay current generator that provides precise current pulses up to 6 amps per channel. It has high timing resolution of 200 ns and integrated resistance measurement capabilities. Advanced safety features and an easy programming interface make it suitable for applications requiring accuracy and repeatability such as airbag testing.
The document provides information on Branson's 2000 Series Integrated Ultrasonic Plastic Welders. Key features include digital controls for accurate setups, autotuning that stores horn frequency in memory, various operating modes, and linear ball bearing slides for smooth motion. The welders are compact and integrate the power supply, controls, and welding stand. Models include 1100W or 2200W power output and standard pneumatic controls. The welders are suitable for applications like welding, staking, and sealing of plastics.
Nippon Pulse linear shaft motor product presentation 2011 in english and germanElectromate
The document discusses a linear shaft motor system for ultra-precision applications. It describes the motor as having a coreless design with cylindrical coils to maximize stiffness while avoiding issues like cogging forces and heat generation from eddy currents. The motor is rated conservatively to dissipate heat directly to air without external cooling. It can achieve nanometer-level positioning accuracy with minimal following error.
Nippon Pulse linear shaft motor presentation 2005Electromate
The document discusses the principles and operation of a linear shaft motor. It describes the motor's structure, which consists of magnets and coils on a sliding part that moves along a shaft. The motor produces thrust using Fleming's left-hand rule as current passes through the coils in the magnetic field. It also highlights several advantages of linear shaft motors like their ability to produce high thrust yet remain compact and lightweight. Applications mentioned include using the motors for high-precision positioning.
This document discusses gearbox and coupling solutions from GAM that can improve machine performance while reducing costs. It describes several gearbox and coupling product lines - including the Dyna, JPG, and Linear Mount series - and highlights benefits like fewer components, higher torque and speed capabilities, precision, and integrated output coupling options. The document encourages contacting Electromate for customized solutions.
The document introduces the MXB product line of actuators from Electromate. It provides details on the features, options, specifications, and comparisons to other actuators. Key information includes sizes ranging from 16mm to 63mm, IP protection ratings, load and moment capabilities, reduction drive options, and how to order an MXB actuator.
Nippon Pulse high precision linear motion made simple presentation 2009Electromate
This document provides information about linear shaft motors from Oriental Motor. It describes linear shaft motors as brushless linear motors that provide high precision linear motion. It discusses their advantages over other linear motion systems, including high efficiency and output. It also outlines Oriental Motor's linear shaft motor product lineup and specifications, applications, and selection guidelines.
Nippon Pulse high precision linear motion made simple presentation oct. 2009 Electromate
The document provides information about linear shaft motors from Oriental Motor. It discusses the structure, advantages, and specifications of linear shaft motors. Key points include that linear shaft motors have a coreless design with no iron in the stator or rotor, providing benefits like no cogging, stiffness, and a non-critical large air gap. Specifications like force, velocity, and acceleration are discussed. Applications include semiconductor manufacturing equipment and medical devices.
Haydon Kerk basic product training 2009.Electromate
Stepper motors are useful for positioning applications because they move a set amount of rotation for each input pulse. Can-stack motors move 7.5 or 15 degrees per pulse, while hybrid motors move 0.9 or 1.8 degrees per pulse. This precise stepping motion allows stepper motors to accurately control position.
GAM was founded in 1990 and brought the Jakob coupling to North America. It has since grown to have 25% of the market share for bellows couplings and launched its first in-house gear product in 2004. The company produces a wide range of gearboxes, couplings, and customized engineered solutions for motion control applications.
MicroE Systems mercury ii product presentationElectromate
The document provides information on Mercury II encoder models from MicroE Systems including the MII6000, MII5000, MII1900, MII1600, linear glass scales, rotary glass scales, and metal tape scales. Key features outlined are resolutions from 5um to 1.2nm, quadrature or serial word outputs, speeds up to 10m/s, programmable features, and small sensor sizes. Application areas include servo motor feedback. The encoders go through extensive testing and qualification.
MicroE Systems mercury i product presentationElectromate
The Mercury encoder family provides various analog and digital encoder options. Key features include single laser optical configuration, compatibility with linear and rotary scales, and modular design that allows pairing any sensor with any grating. Models include analog sensors, quadrature sensors with interpolation built into the head, and programmable quadrature and serial word output options. Vacuum compatible versions are available for most models. The encoders offer high resolution, wide index windows, and small sensor heads with broad alignment tolerances.
The webinar covered AMC's new single phase, DZ, and AZ product expansions. For single phase, 12 new DP drives were introduced with single phase input. The DZ expansion increased power ranges up to 60A and added extended temperature models. The AZ expansion added high voltage models up to 175V with currents from 6A to 25A. New mounting cards were also discussed.
The document introduces two new digital power amplifiers from NuVo - the D2120 and D460. The D2120 has 2 channels that each produce 120 watts of power, while the D460 has 4 channels producing 60 watts each. Both models offer selectable speaker impedance, light and compact design, multiple power triggers, and high energy efficiency in standby mode. The amplifiers are suitable for powering large rooms, outdoor areas, or zones in a home audio system.
The CP-700 preamplifier from Classe Audio offers high performance audio playback through its fully-balanced circuitry implemented symmetrically to reduce noise and distortion. It achieves excellent frequency response and low distortion through the use of an outboard power supply. The CP-700 provides both balanced and single-ended inputs that are each handled differentially, and it offers simple control through a touchscreen, RS-232, and IR remote.
This document provides information on the E Series NV Uninterruptible Power Supply (UPS) from Eaton, including:
- The E Series NV UPS provides power protection for personal computers and peripherals from 600VA to 2000VA with automatic voltage regulation and surge protection.
- Features include automatic voltage regulation, microprocessor control, multiple output receptacles, user replaceable batteries, and software for monitoring power conditions.
- Technical specifications are provided for five models varying in wattage, dimensions, weight, and number of output receptacles.
Power transmission _distribution_line_trainer_tl_04_26Aidil Ab Gani
This document describes equipment for assembling a 380kV power transmission system model for investigating various operating conditions including no load operation, symmetrical and unsymmetrical short circuits, and parallel and series compensation of the transmission line. The system includes components like a transformer, transmission line model, circuit breaker, compensation equipment and loads that can be used to perform experiments.
The document is a printable price list from www.onlineTPS.com, an electronics and robotics components shop in India. It lists 955 products across multiple categories like batteries, motors, propellers, radio controllers, assembled kits, enclosures, cables, connectors, and sockets. The price list is 33 pages long and provides item names, product codes, and basic information for each listed product.
Advanced Motion Controls new product presentation august 2010Electromate
The document provides an update on Electromate's 2010 product line. It summarizes new and updated servo drive products, including larger AZ drives up to 40 amps, 200V DC platforms for AZ drives, and Ethernet connectivity for DZ drives. It also outlines the features and functionality of Electromate's AZ plug-in analog servo drives and DZ plug-in digital servo drives, and provides power ranges for the AZ and DZ series.
Draka - Mobile networks 10-2010 cable products kaapelituotteetAerial Oy
This document provides information on Draka's mobile network cable products, including feeder cables, coaxial antennas, superflexible cables, and jumpers. It describes Draka as a reliable cable supplier and lists their product range and specifications. Key details are provided on specific feeder cable models like the RFA 1/4"-50, including construction, electrical characteristics, attenuation values, and drum specifications. The document aims to demonstrate Draka's capabilities in supplying high quality cables and accessories for mobile telecommunication networks.
The document describes the UHP-Black-LED-630, a fiber coupled ultra high power LED light source produced by Prizmatix. It provides over 400mW of continuous power at the fiber output, around 10 times more powerful than similar high power LED devices. It can be used for applications like fluorescence microscopy and machine vision. The LED has a wavelength of 630nm and comes with options for fiber connection type and accessories like fiber bundles and collimators.
The 9730 Series is a 2 or 4 channel digital delay current generator that provides precise current pulses up to 6 amps per channel. It has high timing resolution of 200 ns and integrated resistance measurement capabilities. Advanced safety features and an easy programming interface make it suitable for applications requiring accuracy and repeatability such as airbag testing.
The document provides information on Branson's 2000 Series Integrated Ultrasonic Plastic Welders. Key features include digital controls for accurate setups, autotuning that stores horn frequency in memory, various operating modes, and linear ball bearing slides for smooth motion. The welders are compact and integrate the power supply, controls, and welding stand. Models include 1100W or 2200W power output and standard pneumatic controls. The welders are suitable for applications like welding, staking, and sealing of plastics.
Nippon Pulse linear shaft motor product presentation 2011 in english and germanElectromate
The document discusses a linear shaft motor system for ultra-precision applications. It describes the motor as having a coreless design with cylindrical coils to maximize stiffness while avoiding issues like cogging forces and heat generation from eddy currents. The motor is rated conservatively to dissipate heat directly to air without external cooling. It can achieve nanometer-level positioning accuracy with minimal following error.
Nippon Pulse linear shaft motor presentation 2005Electromate
The document discusses the principles and operation of a linear shaft motor. It describes the motor's structure, which consists of magnets and coils on a sliding part that moves along a shaft. The motor produces thrust using Fleming's left-hand rule as current passes through the coils in the magnetic field. It also highlights several advantages of linear shaft motors like their ability to produce high thrust yet remain compact and lightweight. Applications mentioned include using the motors for high-precision positioning.
This document discusses linear motion components, including linear bearing types (ball & rod, cross roller, plastic roller, round rail, square rail) and mechanical drive types (manual, screw driven, belt & pulley driven). It provides information on selecting the proper component based on factors like load, travel distance, accuracy needs. The document is an overview presented by LINTECH of their positioning components and systems.
Haydon Kerk motion systems linear motion presentation 2010Electromate
This document discusses linear systems that use leadscrews and nuts to provide precise linear positioning. It describes how leadscrews work using the mechanical advantage of an inclined plane to convert rotational motion to linear motion. It discusses key characteristics of leadscrews like diameter, lead, and pitch. It also discusses how rolling is used to manufacture leadscrews, providing benefits like increased accuracy and low friction. The document addresses how clearances between leadscrews and nuts can cause backlash, and describes different methods like gravity bias, springs, and elastic rings that are used to eliminate backlash.
The document discusses Kerk lead screw assemblies and linear motion products. It summarizes that Kerk develops proprietary lead screw and nut designs using precision thread rolling and custom plastic formulations. Key technologies include thread rolling, nut injection molding, and customization of lead screw assemblies for linear motion applications.
Tolomatic ICR Smart Actuator Product Presentation may 2009Electromate
The document introduces the ICR SmartActuator series from Electromate. It includes the ICR Basic and ICR Plus models, which are integrated servo motor, drive, and controller units. The ICR Basic provides plug-and-play operation for basic two-position motion, while the ICR Plus allows for more advanced programming and network communication options. Both models offer compact, durable designs suitable for industrial automation applications.
The document introduces the new MXE rodless linear motion system from Electromate. It highlights that the MXE system offers maximum durability through its platform design and uses of band and bearing technologies. The MXE provides pneumatic and electric options across 30 products and 6 frame sizes, with solid or profiled bearing choices to suit different load and speed applications. Electromate promotes the MXE's flexibility, durability, and price points.
Nippon Pulse Stepper Motor Basics Presentation Electromate
A stepper motor takes input pulses and moves in proportional steps, making it useful for precision positioning and speed control applications. It requires a power circuit and sequencing circuit to change the phase of its coils. Stepper motors are used in medical devices, semiconductor manufacturing equipment, factory automation systems, office equipment, home appliances, and more. The document goes on to describe how stepper motors generate movement through unipolar or bipolar drive circuits and coils.
Tolomatic ERD20 and ACS Ethernet Customer Presentation november 2011 eis verElectromate
The document discusses Electromate's ERD line of electric rod-style actuators. It provides information on three sizes of ERD actuators with varying strokes, forces, speeds, and options. A new larger ERD20 model is introduced with forces up to 500 lbf. Application examples are listed for various industries including food/beverage and packaging. Electromate's Actuator Control Solutions (ACS) and integration with servo drives is also summarized.
This document provides an overview of basic electronics concepts including the elements of electricity, circuit diagrams, components like resistors and capacitors, and measurement tools like multimeters. It explains key electrical concepts such as voltage, current, resistance, and Ohm's Law. It also outlines different circuit types and how components are represented in schematics. The document is intended as an introductory guide to basic electronics for students and technicians.
Galil DMC-30000 New Product Presentation October 2011Electromate
The document describes the DMC-300xx single-axis motion controller and 800W sine drive from Galil. The DMC-300xx is a smart, compact and low-cost controller that uses a 32-bit processor for fast processing. It can control servos or steppers and multiple units can be daisy chained over Ethernet without a hub. The DMC-30012 package includes an 800W brushless sine drive. It is a smaller and lower-cost alternative to Galil's existing motion controllers, well-suited for remote single-axis motor control applications.
Applied Motion Products stm23 presentation july 2008Electromate
The STM drive+motor unit combines a step motor and drive into a single device. It offers savings on space, wiring and cost over separate motor and drive solutions. The STM provides dynamic current control, anti-resonance, torque ripple smoothing and command signal smoothing. An optional integrated encoder adds stall detection, prevention and position maintenance without increasing size. The STM is available in multiple communication, control and programming models for stand-alone, host-controlled and multi-axis applications.
Applied Motion Products stm23 presentation july 2008Electromate
The STM drive+motor unit combines a step motor and drive into a single device. It offers savings on space, wiring and cost over separate motor and drive solutions. The STM provides dynamic current control, anti-resonance, torque ripple smoothing and command signal smoothing. An optional integrated encoder adds stall detection, prevention and position maintenance without increasing size. The STM is available in multiple communication, control and programming models for stand-alone, host-controlled and multi-axis applications.
The document describes the BLu Servo Amplifiers manufactured by Electromate. The amplifiers can operate servo motors in position, velocity or torque modes. They include features like analog and digital I/O, encoder support, and programming software. Electromate sells and services the amplifiers.
The document discusses Robo Cylinder, a new generation cylinder that uses air substitution. It has integrated electric motor and controller components. The cylinder can perform 7 functions including multi-positioning with 0.02mm repeatability, pausing at positions, and variable speed control. Examples are given of applications in welding fixtures, part transfer machines, and inspection systems where the cylinder's precise positioning and pausing abilities provide benefits over traditional air cylinders.
Tolomatic presentation understanding the application processElectromate
The document discusses factors to consider when selecting an electric actuator system, including load characteristics, maximum speed, stroke length, moment loads, acceleration/deceleration, actuator and carrier positioning, environmental conditions, and precision requirements. It provides examples of common automation applications that use electric actuators and describes different actuator styles for moving and carrying various types and weights of loads. Rodless and rod-style actuators are compared, and load capacity charts list the maximum loads for different rodless actuator models.
The document provides an overview of the STAC6 step motor driver. It compares the STAC6 to other AMP drives like the BLUAC, BLUDC, PDO5580, and Si5580. The STAC6 uses sophisticated software to reduce torque ripple and resonance. It also discusses the STAC6's features like preconfigured motor files, I/O options, and a new configuration tool. The document then goes into more detail on how the STAC6 suppresses mid-range resonance through mathematical modeling and injection of correction signals. It also addresses motor heating considerations with the STAC6.
Gam Gear new product presentation feb. 2007Electromate
This document provides information on gearbox products sold and serviced by Electromate. It includes an overview of Electromate's GAM (Gearbox and Motor) product line, which consists of precision planetary and right angle gearboxes in various output configurations and performance levels. Contact information is provided for Electromate along with product specifications, features, and summaries of individual gearbox series including the JPG, Dyna, SPL, FP, DL, HPS, and EPL series.
This document provides information about Electromate, a company that sells and services automation controllers and software. It summarizes the key features of Electromate's new RCP2 and ERC controllers, including their I/O configurations, connections for linking multiple units, and new RC software features like a tree view navigation and error code monitoring.
Intelligent Actuator robo expo nov 2009Electromate
The document introduces IAI's next generation of cylinder products, including their Mini and Micro ROBO cylinders. It provides an overview of IAI worldwide, details about their new factory addition in Japan, and market share data. The document then describes IAI's product lines of ROBO cylinders, single-axis robots, SCARA robots, controllers, software, multi-axis systems, and their latest mini ROBO cylinders. Applications and specifications are provided for many of the products.
Similar to Tolomatic ERD Powerpoint Presentation june 2010 (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...Electromate
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...Electromate
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...Electromate
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...Electromate
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...Electromate
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...Electromate
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...Electromate
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular SpecsElectromate
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with BrakeElectromate
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage SpecsElectromate
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported SpecsElectromate
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage SpecsElectromate
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CAElectromate
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported SpecsElectromate
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows SpecsElectromate
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA SpecsElectromate
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC SpecsElectromate
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB SpecsElectromate
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
Dandelion Hashtable: beyond billion requests per second on a commodity serverAntonios Katsarakis
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Generating privacy-protected synthetic data using Secludy and MilvusZilliz
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Essentials of Automations: Exploring Attributes & Automation ParametersSafe Software
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectorsDianaGray10
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
The Microsoft 365 Migration Tutorial For Beginner.pptxoperationspcvita
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
5th LF Energy Power Grid Model Meet-up SlidesDanBrown980551
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor IvaniukFwdays
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
Your One-Stop Shop for Python Success: Top 10 US Python Development Providersakankshawande
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
What is an RPA CoE? Session 1 – CoE VisionDianaGray10
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
18. ERD Applications
• Aligning • Laser positioning • Product changeover
• Animation • Material handling • Sonic welding
• Assembly systems • Sorting
• Automatic tool • Medical equipment • Table positioning
changers • Open / close doors • Tension control
• Diverting • Packaging equip. • Test stands
• Converting • Parts clamping • Volumetric pumps
• Conveyors • Pick & Place • Web guidance
• Formers • Plate positioning • And more…!
• Gating change
• Heat staking • Press Fitting
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
19. ERD – Brochure
Available in PDF on
www.tolomatic.com
resource home page
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
20. Introducing the ERD!
Low cost electric Rod-style actuator
• Three sizes: ERD06 / 10 / 15
• Configurable stroke: up to 8 / 10 / 12”
• Forces: up to 20 / 40 / 75 lbs
• Speeds: up to 40”/sec
• Lead screws: 3 screw/nut leads per size
• NEMA compatible motor mount
• Mounting & sensor options
• 5-day delivery
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com