This document provides an instruction manual for the TLM 170 monitor. It includes 3 or less sentences summarizing the key details:
The instruction manual covers the features and operation of the TLM 170 17-inch LCD monitor, including front and rear panel descriptions and explanations of menu options, colour processing, picture-in-picture mode, and fitting instructions for stands and rack mounting.
The Datavideo TLM-700 is a 7-inch LCD monitor with the following key features:
- It has two composite video inputs and can automatically detect NTSC and PAL signals.
- Individual controls for brightness, contrast, color, and tint (NTSC only).
- A wide viewing angle and high resolution 1440 x 234 pixel screen.
- Can be powered by a 12V adapter or regulated 12V supply, making it suitable for field use.
- Comes with a carrying case for protection during transport.
This document is a product guide from IDEC Corporation that showcases their industrial control and automation products. It provides an overview and pictures of their switches, pilot lights, LED illumination units, programmable controllers, operator interfaces, terminal blocks, circuit protectors, power supplies, photoelectric switches, safety components, and explosion-proof equipment. The guide spans 20 pages and is organized by product type and series with page numbers and pictures provided for each.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
1. The document provides instructions for connecting and using an AMPLIDECT 280/285 telephone.
2. Safety precautions are outlined, including how to connect the phone to power and telephone lines.
3. Instructions are provided for unpacking the phone and identifying included parts.
4. An overview of the phone layout and key functions is given for both the base unit and handset.
The Keyfob Model RC200/RC600/RC700 is a wireless remote control for basic operation of security systems. It consists of four buttons to arm, disarm, and trigger panic alarms using encrypted and secure wireless technology. The keyfob can operate the system within or just outside the premises without entering an access code. It uses a lithium battery that lasts up to 10 years and transmits the battery status with each use.
The document describes several door contact models that are battery-operated, wireless door contacts for use in security systems. The door contacts detect the opening and closing of doors and windows. They use spread spectrum technology for encrypted wireless communication and have features such as dual tamper detection, external input, and lithium batteries that can last up to 4 years. The door contacts are available in white or brown and can be used for residential or commercial applications to monitor doors, windows, and other openings.
This document provides installation and operation instructions for the STI-7554, STI-7555, and STI-7555AED protective cabinets. The cabinets have a clear polycarbonate cover with optional siren/strobe alarm and include mounting hardware. The alarm has 32 selectable tones and options for 85dB or 100dB volume. Installation instructions include mounting the cabinet and alarm, setting the alarm tones and timing, and making terminal strip connections. The alarm is powered by a 9V battery or external 12-30V power and has a low battery indicator.
This document provides specifications and installation instructions for protective cabinets (STI-7524 and STI-7525) that include a clear polycarbonate cover with an integrated siren/strobe alarm. The alarm has 32 selectable tones and can be set to different volumes and timing options. Installation involves mounting the cabinet, then installing the alarm electronics and selecting settings before connecting power.
The Datavideo TLM-700 is a 7-inch LCD monitor with the following key features:
- It has two composite video inputs and can automatically detect NTSC and PAL signals.
- Individual controls for brightness, contrast, color, and tint (NTSC only).
- A wide viewing angle and high resolution 1440 x 234 pixel screen.
- Can be powered by a 12V adapter or regulated 12V supply, making it suitable for field use.
- Comes with a carrying case for protection during transport.
This document is a product guide from IDEC Corporation that showcases their industrial control and automation products. It provides an overview and pictures of their switches, pilot lights, LED illumination units, programmable controllers, operator interfaces, terminal blocks, circuit protectors, power supplies, photoelectric switches, safety components, and explosion-proof equipment. The guide spans 20 pages and is organized by product type and series with page numbers and pictures provided for each.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
1. The document provides instructions for connecting and using an AMPLIDECT 280/285 telephone.
2. Safety precautions are outlined, including how to connect the phone to power and telephone lines.
3. Instructions are provided for unpacking the phone and identifying included parts.
4. An overview of the phone layout and key functions is given for both the base unit and handset.
The Keyfob Model RC200/RC600/RC700 is a wireless remote control for basic operation of security systems. It consists of four buttons to arm, disarm, and trigger panic alarms using encrypted and secure wireless technology. The keyfob can operate the system within or just outside the premises without entering an access code. It uses a lithium battery that lasts up to 10 years and transmits the battery status with each use.
The document describes several door contact models that are battery-operated, wireless door contacts for use in security systems. The door contacts detect the opening and closing of doors and windows. They use spread spectrum technology for encrypted wireless communication and have features such as dual tamper detection, external input, and lithium batteries that can last up to 4 years. The door contacts are available in white or brown and can be used for residential or commercial applications to monitor doors, windows, and other openings.
This document provides installation and operation instructions for the STI-7554, STI-7555, and STI-7555AED protective cabinets. The cabinets have a clear polycarbonate cover with optional siren/strobe alarm and include mounting hardware. The alarm has 32 selectable tones and options for 85dB or 100dB volume. Installation instructions include mounting the cabinet and alarm, setting the alarm tones and timing, and making terminal strip connections. The alarm is powered by a 9V battery or external 12-30V power and has a low battery indicator.
This document provides specifications and installation instructions for protective cabinets (STI-7524 and STI-7525) that include a clear polycarbonate cover with an integrated siren/strobe alarm. The alarm has 32 selectable tones and can be set to different volumes and timing options. Installation involves mounting the cabinet, then installing the alarm electronics and selecting settings before connecting power.
The Outdoor Badge Reader Model BR250/BR650/BR750 is a battery-operated, wireless badge reader used for arming and disarming security systems. It uses S2View encrypted wireless technology and has a weatherproof housing that operates between -20°C and +60°C. The badge reader identifies arm/disarm status with LED flashes and beeps, and has a dual tamper detection system to detect if the cover or wall is compromised. It is powered by lithium batteries that can last up to four years and transmits status checks every eight minutes including its ID, tamper status, and battery life.
The Outdoor Siren/Strobe Model SE250/SE650/SE750 is a battery-operated, wireless security device that provides both an audible siren and visible strobe light alarm. It uses encrypted wireless technology to communicate with a security system control panel. The siren produces 105dB of sound for up to three minutes while the strobe flashes four times per second. It is powered by four alkaline batteries that can last up to four years and includes tamper detection if the unit is removed from its mounting surface.
This document provides operating instructions for the Sony Digital Video Camera Recorder Model DCR-VX2000. It includes information on preparing the power supply, inserting cassettes, basic recording and playback functions, and advanced recording options like editing scenes and dubbing audio. The document also details customizing settings through the menu and using "Memory Stick" storage. Safety warnings and regulatory information are provided for United States and Canadian customers.
This document provides specifications for YW series control units including emergency stop switches, pushbuttons, pilot lights, selector switches, and key selector switches. It lists various models with different configurations of buttons, lenses, contacts, and circuits. It also provides detailed dimensional drawings, installation information, ratings, certifications and other technical specifications. The units have compact and rugged designs that meet international safety standards for applications in industrial control panels.
This document provides instructions for installing and operating a Variable Frequency Drive (VFD) motor controller. It describes receiving and inspecting the unit, installation requirements including wiring diagrams, switch settings for operation modes and parameters, and communication protocols for remote control via RS-485. Safety guidelines and technical specifications are also included to ensure proper use of the device.
The document describes the System Sensor T-Tap Waterflow Detectors. It has two models - the WFDT retard model with a sealed retard mechanism, and the WFDTNR non-retard model. Both models fit various tee fittings and have durable, tamper-resistant enclosures with dual SPDT switches. They are designed for primary signaling in residential fire alarm systems and branch line signaling in larger systems.
The document is an instruction manual for the Datavideo TLM-700 7" LCD monitor. It describes what is included in the package, introduces the monitor and its features, explains the functions of the front and rear panels, lists the specifications, and provides information about warranty and disposal.
Catalog đèn báo nút nhấn công tắc IDEC (Nhật Bản) - dòng A6CTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog về đèn báo, nút nhấn, công tắc xoay Idec (Nhật Bản) phi 16 dòng A6. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Điểm đặc biệt của đèn báo IDEC A6 là thích hợp các loạt ứng dụng trong văn phòng và nhà máy. Đèn LED chứa điện trở hạn chế dòng và diode để bảo vệ chống lại kết nối ngược.
RF Solutions C2O - Call 2 Open DatasheetRFSolutions
The document describes a Call2Open (C2O) controller that operates an output relay when it receives a call from authorized phone numbers. It has an IP68 waterproof enclosure, internal antenna, and LED indicators. The C2O can be configured via SMS commands to add/remove numbers from the white list and set the output delay time. It is powered by 12-24VDC and has a 1.2kW rated relay output.
The document provides an introduction and overview of the Philips Y6 color television chassis used in some of their 1997 model TV sets. It describes the key components and signal flow through the chassis. The power supply uses a switching mode design to generate the necessary voltages from a 120V AC source. Minor changes between early and late production models may not be indicated on the identification label but will be noted on schematics. The identification label includes information about screen size and chassis series to aid in servicing.
The PIR Model ITRA110/ITRA600 is a wireless, indoor motion detector designed for security systems. It has a range of 12 meters and 90 degree detection angle, uses one lithium battery that lasts 4 years, and transmits sensor status every 8 minutes including its ID code, tamper status, and battery life. It is made of ABS plastic, measures 3x2x2 inches and weighs 3 ounces, operates between 32-104 degrees Fahrenheit, and mounts at a height of 6.9 feet.
This document provides information on the TCM-7411 fixed dome camera, including:
1. It has a 1/3" CMOS image sensor, day/night function, 0.05 lux minimum illumination, and H.264, MPEG-4, MJPEG video compression.
2. It supports up to 18 fps at 1280x1024 resolution, two-way audio, video motion detection, and PoE or 12V DC power.
3. Accessories include a dome cover, power adapter, and various mounting solutions like surface, wall, pendant, pole, and flush mounts.
The SpectrAlert Advance series of mini-horn sounders are notification devices that provide fire alarm signaling. They operate at 12 or 24 volts and offer high and low volume settings with temporal or non-temporal tone patterns. The mini-horns can be mounted in single gang back boxes and are compatible with synchronization modules. They operate between 32-120 degrees Fahrenheit and are UL listed.
This document appears to be the cover page and table of contents for the operating instructions of a Pioneer DVR-560HX HDD/DVD Recorder. It lists 17 chapters that provide information about features and operation of the recorder, including connections, controls, playback, recording, programming the guide, and menus. The document includes warnings about laser radiation and replacing the AC plug. It also provides the addresses of Pioneer offices in various regions.
Catalog đèn báo, nút nhấn, công tắc idec dòng YW mới nhất 2019CTY TNHH HẠO PHƯƠNG
The document provides specifications for YW series control units including emergency stop switches, pushbuttons, pilot lights, illuminated pushbuttons, selector switches, and key selector switches. Some key details include:
- Emergency stop switches feature a safety lock mechanism, direct opening action, and safe pushbutton design to satisfy safety standards.
- Pushbuttons, pilot lights, and other units have a compact design with space-saving 10mm contact blocks and IP20 finger-safe screw terminals.
- Units are rated for mechanical life of 250,000 operations minimum and electrical life of 100,000 operations minimum.
- Specifications cover operating conditions, degree of protection, insulation/dielectric strength testing, vibration/shock resistance
The document is a technical project plan for installing a sound system, CCTV cameras, and alarm system across multiple health units in Minas Gerais, Brazil. It includes diagrams of the proposed wiring and equipment layout for the 1st and 2nd floors, with symbols explaining the components. Notes provide guidance on installation methods and standards to comply with electrical codes.
The document is the user manual for the AJA D10C2 10-bit Serial Digital to Composite/Component Converter. It converts serial digital video to analog composite or component video and provides two loop-through serial digital outputs. Key features include 10-bit encoding, SDI and analog outputs, configurable output formats via dip switches, and a limited 5 year warranty.
The document provides information about the MixPre portable mixer, including:
- It is a two-channel portable stereo microphone preamplifier and mixer with features like pan switches, a built-in slate microphone, tone oscillator, and headphone monitoring.
- It has high quality microphone inputs with up to 66dB of gain, premium input transformers, and adjustable limiters to prevent clipping.
- Other features include seven segment LED meters, adjustable high pass filters, phantom power, and the ability to run on batteries or external power.
- Technical specifications are provided for aspects like frequency response, dynamic range, gain, output levels, and power requirements.
The document is an installation and operation guide for the AJA Hi5-3G, a video converter that takes 3G, HD, or SD SDI video inputs and converts them to HDMI output with embedded audio. It has features like support for 10-bit and deep color video on the HDMI output as well as additional analog audio outputs. Setup and control is done through a USB connection to a computer running configuration software. The guide describes the product's I/O connections and typical installation process of connecting cables and power.
The LMD-2050W is a 20-inch widescreen LCD monitor for professional broadcast and video applications. It has a high resolution 1680x1050 LCD panel that provides sharp, bright images with a wide 178 degree viewing angle. The monitor supports multiple video formats and has digital and analog inputs. It also features accurate color reproduction, 10-bit processing, and remote control capabilities. The LMD-2050W is suitable for applications like studio monitoring, video production, and post-production due to its image quality, versatility, and lower lifetime costs compared to CRT monitors.
The Outdoor Badge Reader Model BR250/BR650/BR750 is a battery-operated, wireless badge reader used for arming and disarming security systems. It uses S2View encrypted wireless technology and has a weatherproof housing that operates between -20°C and +60°C. The badge reader identifies arm/disarm status with LED flashes and beeps, and has a dual tamper detection system to detect if the cover or wall is compromised. It is powered by lithium batteries that can last up to four years and transmits status checks every eight minutes including its ID, tamper status, and battery life.
The Outdoor Siren/Strobe Model SE250/SE650/SE750 is a battery-operated, wireless security device that provides both an audible siren and visible strobe light alarm. It uses encrypted wireless technology to communicate with a security system control panel. The siren produces 105dB of sound for up to three minutes while the strobe flashes four times per second. It is powered by four alkaline batteries that can last up to four years and includes tamper detection if the unit is removed from its mounting surface.
This document provides operating instructions for the Sony Digital Video Camera Recorder Model DCR-VX2000. It includes information on preparing the power supply, inserting cassettes, basic recording and playback functions, and advanced recording options like editing scenes and dubbing audio. The document also details customizing settings through the menu and using "Memory Stick" storage. Safety warnings and regulatory information are provided for United States and Canadian customers.
This document provides specifications for YW series control units including emergency stop switches, pushbuttons, pilot lights, selector switches, and key selector switches. It lists various models with different configurations of buttons, lenses, contacts, and circuits. It also provides detailed dimensional drawings, installation information, ratings, certifications and other technical specifications. The units have compact and rugged designs that meet international safety standards for applications in industrial control panels.
This document provides instructions for installing and operating a Variable Frequency Drive (VFD) motor controller. It describes receiving and inspecting the unit, installation requirements including wiring diagrams, switch settings for operation modes and parameters, and communication protocols for remote control via RS-485. Safety guidelines and technical specifications are also included to ensure proper use of the device.
The document describes the System Sensor T-Tap Waterflow Detectors. It has two models - the WFDT retard model with a sealed retard mechanism, and the WFDTNR non-retard model. Both models fit various tee fittings and have durable, tamper-resistant enclosures with dual SPDT switches. They are designed for primary signaling in residential fire alarm systems and branch line signaling in larger systems.
The document is an instruction manual for the Datavideo TLM-700 7" LCD monitor. It describes what is included in the package, introduces the monitor and its features, explains the functions of the front and rear panels, lists the specifications, and provides information about warranty and disposal.
Catalog đèn báo nút nhấn công tắc IDEC (Nhật Bản) - dòng A6CTY TNHH HẠO PHƯƠNG
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog về đèn báo, nút nhấn, công tắc xoay Idec (Nhật Bản) phi 16 dòng A6. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
Điểm đặc biệt của đèn báo IDEC A6 là thích hợp các loạt ứng dụng trong văn phòng và nhà máy. Đèn LED chứa điện trở hạn chế dòng và diode để bảo vệ chống lại kết nối ngược.
RF Solutions C2O - Call 2 Open DatasheetRFSolutions
The document describes a Call2Open (C2O) controller that operates an output relay when it receives a call from authorized phone numbers. It has an IP68 waterproof enclosure, internal antenna, and LED indicators. The C2O can be configured via SMS commands to add/remove numbers from the white list and set the output delay time. It is powered by 12-24VDC and has a 1.2kW rated relay output.
The document provides an introduction and overview of the Philips Y6 color television chassis used in some of their 1997 model TV sets. It describes the key components and signal flow through the chassis. The power supply uses a switching mode design to generate the necessary voltages from a 120V AC source. Minor changes between early and late production models may not be indicated on the identification label but will be noted on schematics. The identification label includes information about screen size and chassis series to aid in servicing.
The PIR Model ITRA110/ITRA600 is a wireless, indoor motion detector designed for security systems. It has a range of 12 meters and 90 degree detection angle, uses one lithium battery that lasts 4 years, and transmits sensor status every 8 minutes including its ID code, tamper status, and battery life. It is made of ABS plastic, measures 3x2x2 inches and weighs 3 ounces, operates between 32-104 degrees Fahrenheit, and mounts at a height of 6.9 feet.
This document provides information on the TCM-7411 fixed dome camera, including:
1. It has a 1/3" CMOS image sensor, day/night function, 0.05 lux minimum illumination, and H.264, MPEG-4, MJPEG video compression.
2. It supports up to 18 fps at 1280x1024 resolution, two-way audio, video motion detection, and PoE or 12V DC power.
3. Accessories include a dome cover, power adapter, and various mounting solutions like surface, wall, pendant, pole, and flush mounts.
The SpectrAlert Advance series of mini-horn sounders are notification devices that provide fire alarm signaling. They operate at 12 or 24 volts and offer high and low volume settings with temporal or non-temporal tone patterns. The mini-horns can be mounted in single gang back boxes and are compatible with synchronization modules. They operate between 32-120 degrees Fahrenheit and are UL listed.
This document appears to be the cover page and table of contents for the operating instructions of a Pioneer DVR-560HX HDD/DVD Recorder. It lists 17 chapters that provide information about features and operation of the recorder, including connections, controls, playback, recording, programming the guide, and menus. The document includes warnings about laser radiation and replacing the AC plug. It also provides the addresses of Pioneer offices in various regions.
Catalog đèn báo, nút nhấn, công tắc idec dòng YW mới nhất 2019CTY TNHH HẠO PHƯƠNG
The document provides specifications for YW series control units including emergency stop switches, pushbuttons, pilot lights, illuminated pushbuttons, selector switches, and key selector switches. Some key details include:
- Emergency stop switches feature a safety lock mechanism, direct opening action, and safe pushbutton design to satisfy safety standards.
- Pushbuttons, pilot lights, and other units have a compact design with space-saving 10mm contact blocks and IP20 finger-safe screw terminals.
- Units are rated for mechanical life of 250,000 operations minimum and electrical life of 100,000 operations minimum.
- Specifications cover operating conditions, degree of protection, insulation/dielectric strength testing, vibration/shock resistance
The document is a technical project plan for installing a sound system, CCTV cameras, and alarm system across multiple health units in Minas Gerais, Brazil. It includes diagrams of the proposed wiring and equipment layout for the 1st and 2nd floors, with symbols explaining the components. Notes provide guidance on installation methods and standards to comply with electrical codes.
The document is the user manual for the AJA D10C2 10-bit Serial Digital to Composite/Component Converter. It converts serial digital video to analog composite or component video and provides two loop-through serial digital outputs. Key features include 10-bit encoding, SDI and analog outputs, configurable output formats via dip switches, and a limited 5 year warranty.
The document provides information about the MixPre portable mixer, including:
- It is a two-channel portable stereo microphone preamplifier and mixer with features like pan switches, a built-in slate microphone, tone oscillator, and headphone monitoring.
- It has high quality microphone inputs with up to 66dB of gain, premium input transformers, and adjustable limiters to prevent clipping.
- Other features include seven segment LED meters, adjustable high pass filters, phantom power, and the ability to run on batteries or external power.
- Technical specifications are provided for aspects like frequency response, dynamic range, gain, output levels, and power requirements.
The document is an installation and operation guide for the AJA Hi5-3G, a video converter that takes 3G, HD, or SD SDI video inputs and converts them to HDMI output with embedded audio. It has features like support for 10-bit and deep color video on the HDMI output as well as additional analog audio outputs. Setup and control is done through a USB connection to a computer running configuration software. The guide describes the product's I/O connections and typical installation process of connecting cables and power.
The LMD-2050W is a 20-inch widescreen LCD monitor for professional broadcast and video applications. It has a high resolution 1680x1050 LCD panel that provides sharp, bright images with a wide 178 degree viewing angle. The monitor supports multiple video formats and has digital and analog inputs. It also features accurate color reproduction, 10-bit processing, and remote control capabilities. The LMD-2050W is suitable for applications like studio monitoring, video production, and post-production due to its image quality, versatility, and lower lifetime costs compared to CRT monitors.
The document is the user manual for the AJA HD10A HDTV Analog to Serial Video Converter. It provides an introduction to the product, listing its key features such as accepting RGB or YPbPr analog HD inputs and outputting three HD-SDI signals. The manual describes the product's I/O connections and user controls, including a 4-switch DIP switch for configuration.
This document provides information on the LMD-2451TD 24-inch high grade 3D LCD monitor from Sony. Key features include a micro-polarizer filter for 3D viewing with included circular polarized 3D glasses, ChromaTRU color matching technology, 1920x1200 WUXGA resolution, and inputs for up to 3G SDI digital video signals and PC signals up to WUXGA resolution. The monitor also includes several 3D display features to help with 3D production tasks like horizontal image flipping, disparity simulation, and left/right image switching.
The document is a user manual for the AJA D10CE 10-bit Encoder SDI to Analog Converter. It converts serial digital video to analog composite and component outputs. Key features include 10-bit encoding, SDI and loop-through SDI outputs, and configurable analog outputs. The block diagram shows the signal path from SDI input through filtering and conversion to analog outputs.
This user manual provides instructions for installing and operating the PS 19M single channel beltpack intercom. The beltpack connects to an intercom system via XLR connectors and allows a user to communicate through a headset. It has controls on the front and bottom for adjusting volume, activating talk and call functions, and gain. Cabling guidelines emphasize using shielded cable and connecting all cable shields to a central ground point.
The document describes the Sony HVR-HD1000E digital HD video camcorder. It has a 1/2.9-inch ClearVid CMOS sensor and records in 1080i HDV format. It also has a 10x optical zoom Carl Zeiss lens, Super SteadyShot image stabilization, and can take still photos while recording video. It is a shoulder-mount camcorder designed for professional use with weddings, events, and video production.
The LMD-2110W is a 21.5-inch LCD monitor designed for entry-level video applications. It offers Full HD resolution, a 10-bit processor for accurate color reproduction, and inputs like HDMI, component, and SD-SDI via an adapter. The monitor also provides a CRT-like gamma curve, 109% peak white reproduction, and minimized picture delay for audio synchronization. It is suitable for applications like non-linear editing, office viewing, and security due to its professional features and cost-effective performance.
This document provides instructions for a JVC BR-HD50 HD video cassette recorder. It includes important safety guidelines and information about features such as:
- Recording and playing back HD video in 720p format.
- Outputting digital video and audio via an HDMI terminal to view HD on compatible monitors.
- Outputting analog HD/SD video via a component output terminal.
- Inputting and outputting analog video via composite and Y/C terminals for recording in DV format.
The document is the user manual for the AJA D10AD 10-bit Analog to SDI Converter. It provides instructions on connecting and configuring the converter through dip switches to select input/output formats and settings. The converter accepts component and composite analog video inputs and outputs 4 channels of 10-bit SDI video with configuration of standards, blanking, pedestal and other settings through its dip switch interface.
The LMD-4250W is a 42-inch LCD monitor for broadcast and professional applications. It has a full HD 1920x1080 resolution panel that provides sharp, high-contrast images. The monitor offers accurate color reproduction through ChromaTRU technology and a 178-degree viewing angle. It supports various video and PC formats through multiple inputs and optional decoder boards. The LMD-4250W is suitable for applications such as studio monitoring, post-production, and graphic design.
The document provides safety instructions and setup instructions for the EDIROL VIDEO MIX/LIVE SWITCHER LVS-400. It can be connected to up to four video input devices like cameras and playback devices. The AC adapter should be connected to power the unit. Video and optionally audio cables can connect the input devices to the switcher, and video cables can connect the switcher to an output display. Basic operation instructions are given to switch between inputs or overlay images, and advanced effects like inserting are also described.
The document summarizes the features of the Sony LMD-1751W professional LCD monitor. It has a 17-inch screen and achieves crucial color matching goals through Sony ChromaTRU color processing. It accepts 3G-SDI signal sources and has optional input cards. Key features include high purity color filters, accurate gamma and white balance calibration, and wide viewing angle.
The Datavideo TLM-702 is a dual 7-inch LCD monitor unit for rack mounting. It has the following key features:
- Two 7-inch LCD screens with adjustable brightness, contrast, color, and tint
- Pivoting mounts to adjust screen angle
- Two video inputs and bypass outputs per screen
- Tally lights and aspect ratio selection
- Runs on 12V power for field use
The Datavideo TLM-702 is a dual 7-inch LCD monitor unit for rack mounting. It has the following key features:
- Two 7-inch LCD screens with adjustable brightness, contrast, color, and tint
- Pivoting mounts to adjust screen angle
- Two video inputs and bypass outputs per screen
- Tally lights and aspect ratio selection
- Runs on 12V power for field use
Datavideo ITC-100 Full duplex intercom/ talkback systemAV ProfShop
The document is an instruction manual for the ITC-100 8-way intercom talkback system. It includes information about the standard 1-year warranty and optional 2-year extended warranty. It provides an overview of the key features and components of the ITC-100 base unit and ITC-100SL belt pack, including connections to cameras and mixers. Safety warnings and specifications are also covered in the manual.
This document provides instructions for a 7-inch TFT LCD monitor made by Datavideo. It includes warnings and precautions, warranty information, packing list, features, supported formats, connections and controls, menu options, calibration instructions, and specifications. The monitor has HD/SD-SDI, component, composite, and HDMI inputs and supports various HD and SD video formats. It has adjustable picture, audio, and setup menu options accessible via front panel buttons.
This document provides instructions for using the DAC-9 HDMI to SDI/HD-SDI converter including:
1) Warnings about proper use and safety precautions.
2) A list of included items and overview of features such as HDMI input and SDI/HD-SDI outputs.
3) Information on supported video formats, connections, cabling advice and specifications.
This document provides operating instructions for a turntable model. It includes 3 parts:
1) An overview of the included accessories and safety instructions.
2) Instructions for assembling the turntable parts and connecting it to an amplifier for playback.
3) Information on controls, operation, and maintenance of the turntable.
The document is an instruction manual for the Datavideo TLM-700 7" LCD monitor. It describes what is included in the package, introduces the monitor and its features, explains the functions of the front and rear panels, provides specifications, and gives warranty and disposal information.
The document provides instructions for the Datavideo TLM-433, a 3 monitor LCD bank that can be mounted in a 19-inch rack. Key features include high resolution TFT screens, individual monitor adjustments, a pivoting mount, wide viewing angles, switchable aspect ratios, and tally light indicators. The rear panel includes video inputs and outputs, a 15-pin tally light input, a power input, and earth terminal.
The document provides instructions for the Datavideo TLM-433, a 3 monitor LCD bank that can be mounted in a 19-inch rack. Key features include high resolution TFT screens, individual monitor adjustments, a pivoting mount, wide viewing angles, selectable aspect ratios, and tally light indicators. The rear panel includes video inputs and outputs, a 15-pin tally light input, a power input, and earth terminal.
The document discusses several technologies for remote control and safety applications:
(1) RF remote control uses radio frequencies to transmit data without wires over long distances and through structures.
(2) The iROS rollover sensor uses an accelerometer to accurately detect if a vehicle has rolled over before shutting down electrical systems, as required by regulations.
(3) The programmable switch panel allows remote control of multiple functions through an LCD interface and CAN bus communication between devices.
The document provides instructions for the DAC-07 Analogue to SD-SDI converter. It includes warnings and precautions, a list of features, an overview of the product and its front and rear panels, instructions for securing it to cameras and tripods, cabling advice, specifications, and support information. The DAC-07 converts analogue video and audio inputs to SD-SDI video with embedded audio and has connections for composite, S-video, component, SD-SDI output, and audio via XLR and RCA ports.
The document is an instruction manual for the DAC-7L, an analog to SD-SDI converter. It provides warnings and precautions, lists included items, describes key features such as video and audio inputs/outputs, and provides usage examples and specifications. The manual explains how to safely set up and operate the DAC-7L to convert analog video and embed audio into SD-SDI for transmission over coaxial cable.
This document is a user guide for the LNP95 Liquid Nitrogen Pump Cooling System made by Linkam Scientific Instruments Ltd. It provides instructions on setting up the system, making connections to the liquid nitrogen dewar and temperature controller, and operating the pump. Safety information and technical specifications for the LNP95 are also included.
ROTORK YTC YT-870 LIMIT SWITCH BOX Suppliers ManualYTC INDIA
Rotork YTC YT-870 limit Switch box - Visual position indicator - Easy adjustment of cam position - 6 contacts of terminal ports - All plastic body - Compatibility with any rotary motion actuator
Rotork YTC Smart Positioner, Electro Pneumatic Positioner, Volume Booster, Lock Up Valve, Solenoid Valve, Position Transmitter, I/P Converter Distributors, Suppliers, Traders, Wholesalers India
For any Enquiry Call Us: +91-11-2201-4325, For Bulk Order Email at : Enquiry@ytcindia.com, Our Website :- www.ytcindia.com
Datavideo PD-3 Power Distribution CenterAV ProfShop
The Datavideo PD-3 is a 19" rack mountable universal AC to DC power distribution center, designed to supplies a steady user chosen voltage for production kit whilst on location or in your studio.
This document provides operating instructions and safety precautions for Panasonic video cameras. It includes instructions for connecting and operating the cameras, as well as warnings to read all instructions before use, not expose the cameras to moisture, and only use recommended accessories. The document also provides customer support contact information, the cameras' FCC compliance statements, and precautions regarding batteries, AC adapters, and proper handling of the cameras.
This document provides installation and operation instructions for the Panther transmitter. It includes 3 chapters:
1) The transmitter features 8 buttons and uses 3 AAA batteries. It communicates via 2.4GHz radio frequency.
2) The instructions cover starting and stopping the transmitter, registering it to a receiver, and changing settings like automatic shutdown via button combinations.
3) Safety information is provided regarding functional safety certification when used with compatible receivers, as the stop button engages safety relays to stop machine functions.
Datavideo TP-600 Prompter KIt for Shoulder-mount ENG CamaraAV ProfShop
This document provides instructions for assembling and using the TP-600 Prompter Kit for ENG cameras. It includes a packing list of all included parts, warnings and precautions, warranty information, and instructions for setup, operation, and maintenance of the kit and its accessories such as the optional wired and Bluetooth remote controls.
This document provides instructions for using Televes SAT over IP products, including the SIP-4 and SIP-REC1. It describes:
1. The technical specifications of the SIP-4 and SIP-REC1 units.
2. How to connect the SIP-4 server to a satellite dish and network to stream satellite channels over IP.
3. How to access the SAT-IP stream using a web browser on a PC or apps on tablets to view live TV channels.
This document provides an overview and operating manual for the MD-HX HDMI/SDI Cross Converter. The MD-HX can simultaneously convert between HDMI and SDI while supporting 3G, HD, and SD formats. It also includes scaling and frame rate conversion capabilities. The operating manual describes the unit's four operation modes and provides details on its menu system for controlling inputs, outputs, scaling settings, and other parameters using the front panel LCD and buttons.
The AV-HS410 is a live production switcher that provides:
1) High-end performance and functions in a compact body, including 9 video inputs, 6 outputs, chroma keying, transitions, and memory functions.
2) An intuitive user interface designed for live operation, with a built-in LCD monitor, memory preview, and multi-viewer display.
3) Expandability through optional input/output boards and a software development kit to add customized functions.
Panasonic AW-HE40SW/SK/HW/HK PTZ Camera with HD-SDI / HDMI OutputAV ProfShop
The document provides specifications for Panasonic's AW-HE40 series of integrated full HD cameras. It has a 30x optical zoom lens and supports Power over Ethernet Plus (PoE+) for installation flexibility. The cameras feature a 1/2.3-type MOS sensor, 30x optical zoom lens, 40x total zoom with super resolution, and support various outputs including HDMI, SDI, and IP. They can be controlled remotely over IP from devices like PCs and smartphones.
The MCX-500 is an affordable multi-camera live production switcher that allows a single operator to mix up to 8 video sources plus titles for live events. It provides professional 3G-SDI, HDMI, and composite video inputs along with integrated recording to SD cards. The switcher offers features like chroma keying, transitions, picture-in-picture, and live streaming for engaging live productions and events. Controls are designed for intuitive single-operator use but can also be controlled remotely via tablet or PC.
The document describes two compact 4K camcorders, the GY-HM200 and GY-HM170. Both cameras feature a 12x optical zoom lens, 4K video recording at up to 150Mbps to SD cards, HD recording up to 50Mbps in 4:2:2 color sampling, and dual SD card slots. The GY-HM200 additionally offers live streaming of HD video over WiFi or 4G LTE while continuing to record locally.
The document provides information on the JVC GY-HM620 HD/SD memory card camcorder. It summarizes the key features as having a 23x Fujinon lens, 3 full HD 1/3-inch CMOS sensors, and a FALCONBRID image processing engine for superior image quality. It records in multiple formats including MOV, MP4, and AVCHD and has dual SD card slots for simultaneous or relay recording. The camcorder offers various professional features such as XLR audio inputs, timecode sync, and HDMI and SDI outputs.
The document summarizes the features of the JVC GY-HM660 HD/SD memory card camcorder. It can live stream in full HD up to 12Mbps via Wi-Fi, 4G LTE, or Ethernet. It has a 23x optical zoom lens, dual SD card slots, and records to multiple formats including H.264 up to 50Mbps. The camcorder also has advanced connectivity including SDI and HDMI outputs, USB ports, and XLR audio inputs for professional video applications such as electronic news gathering.
This document provides an overview of the MS-2800 mobile video studio system and its components. It includes diagrams showing how the various components such as cameras, switchers, audio mixers, and monitors connect together via SDI and audio cables. Key components highlighted include the MS-2800A/B 12-channel mobile video switchers, DAC-60 SDI to VGA converters, AM-100 audio mixer, and NVS-20 video streaming server.
The document is a 2012-2013 product guide that describes the HS-2800, a 12-channel portable video studio. The HS-2800 features dual PIP and dual DSK inputs, 8 HD-SDI inputs and outputs, HDMI connectivity, and can be used with accessories like a 42" LCD monitor, digital video recorder, audio mixer, and WiFi bridging unit.
The Datavideo DVK-200 is a standalone chromakey solution that allows users to create virtual studio effects without complicated software. It supports connections from video, computer, and DVI sources and can key against blue, green, white, or black backgrounds. The DVK-200 has advanced key adjustments, input/output options, and can be controlled via RS-232. It is suitable for education, small studios, wedding videography, and other applications.
The Datavideo ITC-100 Intercom system provides clear communication between production crew members through an 8-channel intercom setup. It features a standard 1U rack design for easy integration into existing systems. Each channel supports talkback functions as well as dual color tally lights to indicate speaker status. Communication can occur between individuals or broadcast to all channels simultaneously from the director. The system helps coordinate camera operators, lighting, and more from a control room during live productions.
The RMC-180 is a PTZ camera control unit that can control up to 4 PTC-100 pan, tilt, and zoom cameras. It provides functions like iris, focus, preset positions, and tally indicators for each camera. The RMC-180 integrates easily with Datavideo SE-2000R and HS-2000 HD switchers and allows control over camera balance, noise reduction, and other settings from the switcher. It connects to PTZ cameras via RS-422 and can be controlled over IP through a network video server.
The document provides an overview of an audio/video system setup including various components such as a Datavideo SE-600 8-channel digital video switcher, TLM-170H 17.3" HD/SD LCD monitors, a DN-600 SD digital video recorder, ITC-100 intercom system, DAC-60 SDI to VGA converter, and NVS-20 H.264 video streaming server. The diagram outlines the connections between the components including video, audio, network, and control connections to integrate the system.
The document outlines an audio visual system setup including a 4-channel digital video switcher connected to 7-inch LCD monitors, an SD digital video recorder, and an H.264 video streaming server. The system allows for video and audio switching, recording, streaming, and intercom communication, and includes connections for cameras, projectors, and other peripheral devices. Tally lights indicate the active video and audio sources.
1. Atomos produces field monitor-recorders that allow video professionals to record directly from camera sensors to formats like Apple ProRes and Avid DNxHR on affordable HDD/SSD media. Their devices also function as professional monitors, playback devices, and basic editing tools.
2. The document highlights several Atomos product lines - the high-end Shogun Inferno, the mid-range Flame series including the Shogun Flame and Ninja Flame, and the entry-level Blade series. All are designed for professional recording, monitoring, and basic editing functions.
3. A case study describes how the Cloakroom Media production company used a Shogun Flame and N
The PXW-Z450 is a new 4K shoulder camcorder from Sony that records using the XAVC format. It has a newly developed 2/3-type Exmor RTM CMOS sensor that provides high quality 4K and HD images. The camcorder is compatible with a wide range of existing HD lenses through its B4 lens mount and also supports 4K lenses. It offers features such as low power consumption, wireless capabilities and flexible recording formats that make it suitable for live news gathering and television production in both 4K and HD.
Datavideo SE-2200 6 input HD broadcast quality switcherAV ProfShop
The document provides instructions and specifications for the SE-2200 production switcher. It includes a packing list, descriptions of the front and rear panels, explanations of connection types and ports, and instructions for operating keyboard controls and menu options. Dimensions and technical specifications are also provided.
Presentation by Herman Kienhuis (Curiosity VC) on Investing in AI for ABS Alu...Herman Kienhuis
Presentation by Herman Kienhuis (Curiosity VC) on developments in AI, the venture capital investment landscape and Curiosity VC's approach to investing, at the alumni event of Amsterdam Business School (University of Amsterdam) on June 13, 2024 in Amsterdam.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
The report *State of D2C in India: A Logistics Update* talks about the evolving dynamics of the d2C landscape with a particular focus on how brands navigate the complexities of logistics. Third Party Logistics enablers emerge indispensable partners in facilitating the growth journey of D2C brands, offering cost-effective solutions tailored to their specific needs. As D2C brands continue to expand, they encounter heightened operational complexities with logistics standing out as a significant challenge. Logistics not only represents a substantial cost component for the brands but also directly influences the customer experience. Establishing efficient logistics operations while keeping costs low is therefore a crucial objective for brands. The report highlights how 3PLs are meeting the rising demands of D2C brands, supporting their expansion both online and offline, and paving the way for sustainable, scalable growth in this fast-paced market.
The Most Inspiring Entrepreneurs to Follow in 2024.pdfthesiliconleaders
In a world where the potential of youth innovation remains vastly untouched, there emerges a guiding light in the form of Norm Goldstein, the Founder and CEO of EduNetwork Partners. His dedication to this cause has earned him recognition as a Congressional Leadership Award recipient.
Discover the Beauty and Functionality of The Expert Remodeling Serviceobriengroupinc04
Unlock your kitchen's true potential with expert remodeling services from O'Brien Group Inc. Transform your space into a functional, modern, and luxurious haven with their experienced professionals. From layout reconfiguration to high-end upgrades, they deliver stunning results tailored to your style and needs. Visit obriengroupinc.com to elevate your kitchen's beauty and functionality today.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
Best Competitive Marble Pricing in Dubai - ☎ 9928909666Stone Art Hub
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
Unlocking WhatsApp Marketing with HubSpot: Integrating Messaging into Your Ma...Niswey
50 million companies worldwide leverage WhatsApp as a key marketing channel. You may have considered adding it to your marketing mix, or probably already driving impressive conversions with WhatsApp.
But wait. What happens when you fully integrate your WhatsApp campaigns with HubSpot?
That's exactly what we explored in this session.
We take a look at everything that you need to know in order to deploy effective WhatsApp marketing strategies, and integrate it with your buyer journey in HubSpot. From technical requirements to innovative campaign strategies, to advanced campaign reporting - we discuss all that and more, to leverage WhatsApp for maximum impact. Check out more details about the event here https://events.hubspot.com/events/details/hubspot-new-delhi-presents-unlocking-whatsapp-marketing-with-hubspot-integrating-messaging-into-your-marketing-strategy/
During the budget session of 2024-25, the finance minister, Nirmala Sitharaman, introduced the “solar Rooftop scheme,” also known as “PM Surya Ghar Muft Bijli Yojana.” It is a subsidy offered to those who wish to put up solar panels in their homes using domestic power systems. Additionally, adopting photovoltaic technology at home allows you to lower your monthly electricity expenses. Today in this blog we will talk all about what is the PM Surya Ghar Muft Bijli Yojana. How does it work? Who is eligible for this yojana and all the other things related to this scheme?
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...BBPMedia1
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
1. TLM 170 / D / M / MD
17” Widescreen LCD TFT Monitor
Instruction Manual
www.datavideo-tek.com
Rev 060509
2. Table of contents
Warnings and Precautions ------------------------------------------------------------------------------------ 2
Warranty ---------------------------------------------------------------------------------------------------------- 3
Disposal ------------------------------------------------------------------------------------------------------------ 3
Packing List ------------------------------------------------------------------------------------------------------ 4
Introduction ------------------------------------------------------------------------------------------------------- 4
Features ----------------------------------------------------------------------------------------------------------- 4
Operation ---------------------------------------------------------------------------------------------------------- 5
Front Panel ------------------------------------------------------------------------------------------------ 5
Rear Panel-------------------------------------------------------------------------------------------------- 6
Menu Options --------------------------------------------------------------------------------------------------------- 7
Colour Processor ------------------------------------------------------------------------------------------------ 8
PIP Menu ---------------------------------------------------------------------------------------------------------- 9
Special Feature Menu ---------------------------------------------------------------------------------------- 12
System Info. Menu -------------------------------------------------------------------------------------------- 13
Fitting Stand - (TLM-170 / TLM-170D only) ------------------------------------------------------------- 14
Fitting Optional 19” Rack Ears - (TLM-170 / TLM-170D only) -------------------------------------- 15
Rack Mounting - (TLM-170M / TLM-170MD only) ----------------------------------------------------- 16
Specification ---------------------------------------------------------------------------------------------------- 17
Service and Support ------------------------------------------------------------------------------------------ 18
3. Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage.
6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure safe
and reliable operation of this unit, and to protect it from overheating, do not block or cover these
openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings on
the bottom of the cabinet will be blocked. This unit should never be placed near or over a heat
register or radiator. This unit should not be placed in a built-in installation unless proper ventilation is
provided.
7. This product should only be operated from the type of power source indicated on the marking label
of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or
your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be
walked on, rolled over, or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings on the
products plugged into the extension cord do not exceed the extension cord’s rating.
10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not
exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch
dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never
spill liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not attempt to service this product
yourself. Opening or removing covers that are marked “Do Not Remove” may expose you to
dangerous voltage points or other risks, and will void your warranty. Refer all service issues to
qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service personnel under the following
conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust only
those controls that are covered by the operating instructions in this manual; improper
adjustment of other controls may result in damage to the unit and may often require
extensive work by a qualified technician to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.
4. Warranty
Datavideo warrants that the equipment it manufactures shall be free from defects in material and
workmanship for a period of 12 months from the date of product purchased. If equipment fails due to such
defects, Datavideo will, at its option, repair or provide a replacement for the defective part or product.
Equipment that fails after the warranty period, has been operated or installed in a manner other than that
specified by Datavideo, or has been subjected to abuse or modification, will be repaired for time and material
charges at the Buyer’s expense.
This warranty does not affect your statutory rights within the Country of purchase.
Disposal
For EU Customers only - WEEE Marking.
This symbol on the product indicates that it will not be treated as household waste. It must be handed over to
the applicable take-back scheme for the recycling of electrical and electronic equipment. For more detailed
information about the recycling of this product, please contact your local Datavideo office.
5. Packing List:
The following items should be included in the box. If any items are missing please contact your supplier.
Item Model No. TLM-170 TLM-170M TLM-170D TLM-170MD
BNC to BNC Cable 1.2m 3 3 5 5
Phono to Phono Cable 1.5m 2 2 2 2
Mini Din Plug to Plug Cable (S-Video) 1.2m 1 1 1 1
Switch Mode Power Supply 12V 6.6 A 1 1 1 1
AC Mains Cable for PSU 1 1 1 1
Rack Screws 8 8 10 10
Wrench 8mm / 10mm 1 1
Stand (LA-100-2) 1 1
Screw M3 x 6mm 10 10
Screw M4 x 6mm 8 8
Velcro Cable Tie 36cm 2 2
Crosshead Screwdriver Bit 7.5cm 1 1
** Note ** Optional 19” Rack Ear Set (6U) can be ordered separately for the TLM-170 and TLM-170D models.
Please speak with your local dealer for price and availability of these optional rack ears.
Introduction
The Datavideo TLM-170 is a 17” High Resolution (1440 x 90) TFT Widescreen Monitor. It features multiple
input options, overscan, selectable safe area frame and Picture in Picture.
Features
17” High Resolution TFT Widescreen Monitor 1440 x 900
Underscan + Overscan
Switchable Safe Area Frame - 70% / 80% / 90%
Multiple Inputs - HDMI / VGA / Component (YUV) / S-Video (Y/C) / Composite x 2 / HD/SD SDI (D models
only)
PIP Mode
Bicolour Tally Light
Switchable Aspect Ratio -16:10 / 16:9 / 4:3
Robust Metal Construction
NTSC / PAL Compatible
12v Operation
6. Operation
Front Panel
Bi-Colour Tally Light - Can be used to indicate Live (RED) or Cued (AMBER) source.
Source Select Buttons - Select the type of input you are using - SDI (TLM-170D / TLM170MD only), HDMI,
VGA, YUV, S-Video, CV 1 & 2
The active input will be indicated by a red LED on the Source Button
Aspect Ratio Button - Sets the Aspect Ratio to 16:10 / 16:9 / 4:3
16:10 16:9 4:3
7. PIP Button - Activates Picture in Picture Mode - See PIP Menu for more details. Red LED will light when PIP
mode is active.
Menu Navigation Buttons - Display and navigate the set up menus - See Menu Options for more details
Down Button also switches the Safe Area Mask On / Off
UP Button also switches the 4:3 Mask On / Off - (only available in 16:9 and 16:10 modes)
Mute Button - Mutes the audio from the internal speakers or headphone socket.
Volume Control & Audio Meter - Adjusts the speaker / headphone volume up / down.
Standby Button - Switches the TLM-170 screen On from standby / Off to standby
N.B. main Power On/Off switch is located on the rear of the TLM-170.
Headphone Socket - 3.5mm headphone socket; internal speaker circuit will automatically mute when
headphones are connected.
8. Rear Panel
VESA 100 x 100 Mounting Holes - For fitting a universal VESA style wall mounting bracket.
Also used for attaching the stand (LA-100-2) to the monitor. Stand is supplied with TLM-170 & TLM-170D
models.
3.5mm Tally Light Input - Tally light information can be supplied to the TLM-170 from the Datavideo RMC-
140, TB-5 or TB-10 via this socket.
Component Video Input - BNC connectors for Component (YUV (Y/R-Y/B-Y)) Video.
S-Video Input - Input for S-Video (Y/C).
Composite Video Inputs 1 & 2 - BNC connectors for Composite Video.
Analog Audio Inputs - Mono Audio Inputs to correspond to the Analog Video Inputs (Component / S-Video /
Composite 1 & 2)
Speaker Output Connections - Speaker Output connections Max 5v p - p (2w)
DC In Socket - 2.1mm In Line Power Socket with screw lock, for connecting the power supply or suitable
12v 5A feed.
On / Off Switch - Main on / off switch, switches the TLM-170 on and off.
The Standby button on the front panel will switch the TLM-170 from Standby Mode to On.
VGA Input - Sub D 15 Pin connection for VGA Input - Max Res. 1920 x 1080.
HDMI Input - Video and Audio input from HDMI
SDI Input & Loop Through - BNC Input for HD / SD SDI with a Loop Through Output (D Models only)
9. Menu Options
The TLM-170 is set up via on screen menus. To display the on screen menu press the MENU button.
The menus are navigated using the Up / Down buttons.
There are four menus
Colour Processor
PIP Feature Setting
Special Feature Setting
System Information
10. Colour Processor
The first menu to be displayed is the Colour Processor Menu.
To access the Colour Processor Menu press enter, the Brightness setting will be highlighted.
To adjust the Brightness press Enter again. An adjustment bar will appear at the bottom of the screen.
Use the Up / Down buttons to change the setting and then press Enter to store the new value and return to
the main menu.
To select a different setting (Contrast, Saturation, Sharpness) use the Up / Down buttons. Follow the same
procedure to set the other values.
11. PIP Menu
The PIP Feature Setting Menu allows you to adjust the appearance of the picture in picture. The position,
size, main source and sub source can be set in the menus.
To access the menu press enter so that PIP Mode is highlighted
To access the options for the selected setting press enter again, so that the option column is highlighted - In
this case Large PIP.
12. Use the Up / Down buttons to navigate the available options.
You can choose: PIP Mode Large PIP
Small PIP
PIP Position Bottom-Right
Top-Left
Top-Right
Bottom Left
PIP Main Source CVBS 1
CVBS 2
SVIDEO
COMP. - Component
HDMI
SDI
PIP Sub Source CVBS 1
CVBS 2
SVIDEO
COMP. - Component
HDMI
SDI
N.B. The PIP feature can only be one analogue source and one digital source. i.e. If the main source
is analogue then the sub source must be digital, and vice versa.
Examples: Main Source = CVBS 1
Sub Source = SDI / HDMI only
Main Source = HDMI
Sub Source = CVBS1 / 2 SVIDEO COMP. VGA only
13. Special Feature Menu
The Special Feature Menu has settings for the safe area frame, the scan mode and the speaker settings.
The menu is accessed in the same way as the other menus, press the ENTER button and then use the UP /
DOWN buttons to highlight the setting you want to alter. In this case Frame Ratio
Once the setting is highlighted press the ENTER button again to highlight the options, and then use the UP /
DOWN buttons to select the required value, and press ENTER once more to accept the new value.
14. In the Special Feature Menu you can choose:
Frame Ratio - This will display a “Safe Area” Off / 70% / 80% / 90%
frame on the screen
70% 80% 90%
Once you have set the Frame Ratio you can exit the menu. To display the Safe Area frame press the DOWN
Button
Mask Type - This sets the 4:3 Mask option. Overlay / Transparent
Overlay Mode Transparent Mode
Once you have set the Mask Type you can exit the menu. To display the 4:3 Mask press the UP Button
N.B. Only works in 16:9 and 16:10 modes
Scan Mode Overscan / Underscan
Internal Speaker Mute Control - On / Off
External Speaker Mute Control - On / Off
System Info. Menu
The System Info. Menu displays the Firmware Version of the monitor, and offers a Factory Reset option,
which will return all the settings of the monitor to the factory defaults.
To reset the monitor press the ENTER button, so that Factory Reset is highlighted, and then press ENTER
again to highlight the options column.
Use the UP / Down button to select YES from the options and then press ENTER to reset the monitor. After
a few seconds the monitor will be reset.
15. Fitting the stand to the TLM-170 / TLM 170D
The TLM-170 / TLM-170D is supplied with a desktop stand (LA-100-2). Please refer to the LA-100-2 User
Guide for adjustments to the stand, prior to fitting it to the monitor.
To attach the stand to the monitor, align the stand with the VESA 100 mounting holes on the rear of the
monitor, and use the four supplied screws to secure it.
16. Fitting Optional 19” Rack Ears to the TLM-170 / TLM-170D
In addition to the desktop stand the TLM-170 / TLM-170D can be fitted with 19” Rack Ears, these allow the
monitor to be rack mounted (19” 6U). For price and availability of these rack ears please speak to your local
dealer. If purchased these ears can be fitted as follows:
Use the supplied screws to attach the left and right rack ears. You will find there are four screws either side,
as illustrated above, plus additional screws at the base of each rack ear, as illustrated below.
17. Fitting the TLM-170M / MD to a 19” Rack
The TLM-170 M / TLM-170 MD is designed to rack mount. When folded away it is 1U high, please bear in
mind that when opened for operation the monitor is 6U high, so leave adequate room for this.
The monitor is ready fitted with sliding rack rails, these have a length adjustment at the rear to suit the
distance between the front and rear rack rails of your cabinet.
To adjust the length loosen the four adjustment nuts as illustrated below, and pull the side rails back as far
as is required. Then re-tighten the nuts.
Mount the monitor in your rack with the rear panel facing upwards. Ensure the rack mounting screws are
secured both front and rear.
Once mounted unscrew the two locking screws on either side of the front panel, and pull the monitor forward
using the handle. Once the monitor is fully forward simply hinge it up into a vertical position.
To fold away, pull the top of the monitor forward, so that it hinges down to a horizontal position, then push it
back into the rack until you are able to screw in the locking screws.
N.B. When folding the monitor away be careful not to trap your fingers or scrape your knuckles on
the rack cabinet.
18. Specifications
LCD
Size 17”
Resolution 1440 x 900
Aspect Ratio 16:10 / 16:9 / 4:3
Viewing Angle 140° Horizontal / 120° Vertical
Response Time 8ms (B to W)
Contrast 700:1
Brightness 500 cd/m2
Video Formats
Video Inputs
SD Video NTSC / PAL
HD Video 720/50P / 720/59P
1080/50i / 1080/59i
Video Outputs
HD/SD-SDI Loop Through Output (TLM-170D / MD models only)
Audio Inputs
Unbalanced mono audio inputs for CVBS1 / CVBS2 / SVIDEO / Component
HDMI Audio Input
Audio Outputs
Terminal Connection for speaker outputs (2 Watt)
Maximum output for speaker in FP is 2 Watts
Headphone Socket 3.5mm Stereo Jack
Video Adjustments
Brightness 0 ~ 100
Contrast 0 ~ 100
Colour 0 ~ 100
Tint (NTSC) 0 ~ 100
Sharpness 0 ~ 24
Working Temperature
0° to 50° C / 32° to 122° F
Power Requirements
DC In 12V 5.5A via 2.1mm In-Line DC Jack Socket (Lockable)
Weight
4.3Kg
Specifications are subject to change without notice.
19. Service and Support
It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to
assist you in setting up and operating your system. Please refer to our web site www.datavideo-tek.com for
answers to common questions, support requests or contact your local office below.
Datavideo Global Website: www.datavideo-tek.com
Datavideo Corporation
Tel: +1 562 696 2324 Fax: +1 562-698-6930 E-Mail: contactus@datavideo.us
Datavideo Technologies Europe BV
Tel: +31-30-261-96-56 Fax: +31-30 261-96-57 E-Mail: info@datavideo.nl
Datavideo UK Limited
Tel: +44 1457 851 000 Fax: +44 1457 850 964 E-Mail: sales@datavideo.co.uk
Datavideo Technologies Co., Ltd
Tel: +886 2 8227 2888 Fax: +886-2-8227-2777 E-mail: service@datavideo.com.tw
Datavideo Technologies China Co., Ltd
Tel: +86 21-5603 6599 Fax:+86 21-5603 6770 E-mail: service@datavideo.cn
Datavideo Technologies (S) PTE Ltd
Tel: +65-6749 6866 Fax: +65-6749 3266 E-mail: sales@datavideo.sg
Datavideo HK Ltd
Tel: +852 2833 1981 Fax: +852-2833-9916 E-mail: info@datavideo.com.hk
All the trademarks are the properties of their respective owners.
Datavideo Technologies Co., Ltd. All rights reserved 2018.
G082060443B1