1) The document is a user manual for Shenzhen Diwei Machinery Co., Ltd.'s TK116 GPS vehicle tracking terminal.
2) It provides instructions on installing, using, and troubleshooting the terminal, which supports vehicle positioning and tracking via GPS, GSM, and GPRS networks.
3) The manual covers technical specifications, installation steps, wiring diagrams, setting up the terminal, terminal functions like positioning inquiries, fuel cutoff controls, and more.
Shenzhen Eelink Communication Technology Co. Ltd., launches a new product, TK119 waterproof GPS vehicle tracker to position, monitor and control the vehicle on the position server through GPRS, GPS, GLONASS and internet.
You will know how to use the LTE 4G FDD GPS tracker TK419
TK419 is often used to track vehicles, motorcycles or boats,and It is a useful tool for fleet management. The users can also cut off fuel/ignition remotely and check historical routes and other vehicle data. The TK419 has excellent stability.
TK419 can be used for locating, tracking and monitoring any remote target through SMS, PC Computer or Mobile APP.
The KANNAD 406 AF-H is an automatic fixed emergency locator transmitter developed for installation on helicopters. It transmits a distress signal via COSPAS-SARSAT satellites using 406 MHz frequency for precise location. The ELT can be programmed quickly and mounted with velcro, allowing easy replacement. It has a 6-year battery life and optional navigation interface to transmit aircraft position.
Xexun gps vehicle tracker xt009 user manualxxgpstraker
The document provides instructions for setting up and using an XT-009 GPS vehicle tracker. It includes details on hardware components, installation, functions like geo-fencing, speed alerts, and more. The tracker can be used to monitor vehicles, track assets, and ensure safety of people. It supports features such as motion detection, ignition alerts, and sending emergency alerts with the press of a button.
This document provides a user manual for a GSM/GPRS/GPS tracker device. It describes the hardware, accessories, specifications, functions and usage of the tracker, which can locate and monitor targets using GPS and cellular networks. The tracker is available in several models for tracking people, vehicles and other assets. It has security, tracking and monitoring capabilities and can send alerts for things like low batteries, ignition status, doors opening and more.
This document provides operating instructions for a VLT AQUA Drive frequency converter. It describes safety procedures that must be followed when installing and servicing the frequency converter due to the high voltages present. Proper grounding and ensuring capacitors are discharged is critical. The document reviews mechanical installation, electrical installation procedures, start up testing, programming and configuration, application examples, troubleshooting, and specifications. Safety is emphasized throughout as frequency converters require qualified personnel to install and maintain.
Shenzhen Eelink Communication Technology Co. Ltd., launches a new product, TK119 waterproof GPS vehicle tracker to position, monitor and control the vehicle on the position server through GPRS, GPS, GLONASS and internet.
You will know how to use the LTE 4G FDD GPS tracker TK419
TK419 is often used to track vehicles, motorcycles or boats,and It is a useful tool for fleet management. The users can also cut off fuel/ignition remotely and check historical routes and other vehicle data. The TK419 has excellent stability.
TK419 can be used for locating, tracking and monitoring any remote target through SMS, PC Computer or Mobile APP.
The KANNAD 406 AF-H is an automatic fixed emergency locator transmitter developed for installation on helicopters. It transmits a distress signal via COSPAS-SARSAT satellites using 406 MHz frequency for precise location. The ELT can be programmed quickly and mounted with velcro, allowing easy replacement. It has a 6-year battery life and optional navigation interface to transmit aircraft position.
Xexun gps vehicle tracker xt009 user manualxxgpstraker
The document provides instructions for setting up and using an XT-009 GPS vehicle tracker. It includes details on hardware components, installation, functions like geo-fencing, speed alerts, and more. The tracker can be used to monitor vehicles, track assets, and ensure safety of people. It supports features such as motion detection, ignition alerts, and sending emergency alerts with the press of a button.
This document provides a user manual for a GSM/GPRS/GPS tracker device. It describes the hardware, accessories, specifications, functions and usage of the tracker, which can locate and monitor targets using GPS and cellular networks. The tracker is available in several models for tracking people, vehicles and other assets. It has security, tracking and monitoring capabilities and can send alerts for things like low batteries, ignition status, doors opening and more.
This document provides operating instructions for a VLT AQUA Drive frequency converter. It describes safety procedures that must be followed when installing and servicing the frequency converter due to the high voltages present. Proper grounding and ensuring capacitors are discharged is critical. The document reviews mechanical installation, electrical installation procedures, start up testing, programming and configuration, application examples, troubleshooting, and specifications. Safety is emphasized throughout as frequency converters require qualified personnel to install and maintain.
Connection manual (non mitsubishi products 2 for gt works3)nguyen_nbn
This document provides a list of various PLCs, temperature controllers, safety controllers, and other industrial devices from different manufacturers. It also includes safety precautions and warnings for working with the GT Works3 software and connecting to non-Mitsubishi products. Precautions are given for design, mounting, wiring, testing, startup, maintenance, touch panels, and backlight replacement. Proper handling, installation, and disposal are emphasized to prevent accidents, injuries, fires, and malfunctions.
Catalog: Biến tần FVR Micro Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
The document provides information about the E1100 Servo Controller Series from NTI AG / LinMot. The E1100 series includes various servo controller models for controlling 1, 2, or 3 phase linear or rotary motors. The controllers offer integrated digital position control and interfacing to machine controls via digital interfaces like PROFIBUS-DP, DeviceNet, and CANopen. Key features include storing motion sequences and profiles, synchronization to a master encoder, digital and analog inputs/outputs, and flexible connectivity options.
The document provides information about wireless M2M-IoT solutions from MTX-M2M, including Java-enabled M2M modems, Linux platforms, routers, and accessories. MTX-M2M offers a range of modem products powered by Cinterion modules that support 2G, 3G, and 4G cellular networks with features like GPS, WiFi, Bluetooth, and various interfaces. Their Java-enabled modems can run custom applications and connect devices for M2M/IoT scenarios.
VLT® Micro Drive is a genuine VLT® frequency converter with unsurpassed reliability, user-friendliness, condensed functionality, and extremely easy to commission. Terminal numbers are named in the same manner as in the rest of the VLT® family. It’s developed and manufactured by Danfoss Drives, the leading drives experts since 1968 and creators of VLT® – The Real Drive. For more info, visit http://www.danfoss.in/
This document provides instructions for installing, calibrating, and using an ED3 SkidWeigh Plus on-board check weighing system with a mobile Zebra label printer. The system consists of a digital indicator, pressure transducer, and optional Zebra printer. Installation involves mounting the indicator and transducer, making electrical and hydraulic connections. Calibration is done through an administration menu by setting the date/time, vehicle ID, and saving data to a USB drive. The system weighs loads by measuring hydraulic pressure when lifts occur.
This document provides installation and operation instructions for the SSM23Q/IP integrated step-servo motor. It includes:
1. An overview of the motor's features such as torque capabilities, control modes, inputs/outputs, and Ethernet communication.
2. Instructions for installing the necessary software, mounting the motor, and choosing an appropriate power supply.
3. Details on connecting the power supply, connecting the motor to a PC over Ethernet, and descriptions of the input and output connections.
4. Contact information for support.
Ed3 at v133 Lift truck onboard weighing scaleTed Jurca
This document provides installation and calibration instructions for the ED3-AT SkidWeigh Plus on-board check weighing system. It describes how to install the digital indicator, pressure transducer, and make electrical connections. It also explains how to enter the administration menu to calibrate the weighing function and set the date, time, and vehicle ID number. Safety precautions are provided regarding disconnecting batteries and securely mounting components.
The document is a letter from Rotembecky Limited introducing themselves as an engineering services provider. They offer services including engineering design, installation, automation, generator installation and maintenance. They aim to provide customized solutions and quick responses to meet clients' engineering needs. Some of their clients include major banks and companies. They are looking to establish a business relationship with the recipient.
The document provides troubleshooting and maintenance instructions for a CashCode bill validator. It includes performing self-diagnostics to check for errors, adjusting DIP switch settings to configure denominations and modes, cleaning to prevent jams and improve performance, and updating software using memory cards or USB. Contact information is provided for additional support.
This document is a user manual for Servo Tech Middle East Co. Ltd.'s AC servo drives models SR, TSDA, and SD. It contains information about unpacking, relocating, safely installing, and dimensions of the drives. Chapter 1 provides an introduction and technical specifications. Chapter 2 details system wiring, including an overview of connectors and pinouts. Chapter 3 covers panel operation such as mode selection and auxiliary functions. Chapter 4 lists possible alarm codes.
Ls catalog thiet bi tu dong ss7 e_110530_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
This document provides a block diagram and component list for a computer motherboard. The block diagram shows the system architecture including major components like the CPU, chipset, memory slots, graphics, and I/O. It depicts the connections between components and power delivery. Tables provide details on the integrated pull-ups/downs for chipset pins and strap pin functions for the chipset.
This document provides a summary of industrial robot options from Mitsubishi Electric, including:
1) It lists the main robot models, controllers, software, interfaces and other optional equipment available from Mitsubishi Electric for industrial robots.
2) It provides basic details on the RV-1A and RV-2AJ robots such as their dimensions, specifications and application examples.
3) It includes diagrams showing the layout and dimensions for installing the robot base and attaching hands.
The document provides a quick reference guide for parameter settings of the P7 Drive. It lists the parameter numbers, factory settings, and space for user settings. There are warnings and cautions provided about safely installing and operating the drive. The introduction describes the drive's applicability for HVAC applications and its communication capabilities.
The document provides instructions for three network alarm panels: HB-2050G, HB-4040G, and HB-5050G. It describes the connections, technical specifications, and functions of each panel. It also provides guidance on setting up the corresponding mobile app, including configuring account and alarm settings, adding detectors and remote controls, and setting arming schedules. The document instructs users on reading the LCD displays and indicator lights to understand the panel's status.
This document is a user manual for a long-life GPS tracker. It describes the tracker's features such as long battery life, magnetic installation, dual GPS/LBS positioning, and setting/tracking via web, app, or SMS. It provides instructions on installation, including inserting the SIM card and installing the tracker. It also covers status indicators, setting/inquiry methods, troubleshooting, and warranty information.
The document summarizes an installation and operation manual for a vehicle security system that sends text messages and GPS data to a mobile phone. It alerts the owner if the vehicle alarm sounds or the battery is disconnected, and allows requesting the current GPS location via text. The manual provides instructions on initialization, controlling outputs, requesting GPS data, changing passwords, testing and installing the system.
MGT90 magnetic GPS Tracking System for cars is an intelligent vehicle tracking and security system used in business traffic, logistics distribution, automobile lease, intelligent transportation, and many other applications.
This document is a user manual for King Pigeon's GSM SMS Controller alarm systems. It describes the features and functions of the S130, S140, and S150 models, which allow users to remotely monitor and control equipment via SMS text messages. The manual provides setup instructions, a list of SMS commands, and specifications for the alarm systems. It also contains safety guidelines and describes the various inputs, outputs, and components of the controller units.
Connection manual (non mitsubishi products 2 for gt works3)nguyen_nbn
This document provides a list of various PLCs, temperature controllers, safety controllers, and other industrial devices from different manufacturers. It also includes safety precautions and warnings for working with the GT Works3 software and connecting to non-Mitsubishi products. Precautions are given for design, mounting, wiring, testing, startup, maintenance, touch panels, and backlight replacement. Proper handling, installation, and disposal are emphasized to prevent accidents, injuries, fires, and malfunctions.
Catalog: Biến tần FVR Micro Fuji
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
The document provides information about the E1100 Servo Controller Series from NTI AG / LinMot. The E1100 series includes various servo controller models for controlling 1, 2, or 3 phase linear or rotary motors. The controllers offer integrated digital position control and interfacing to machine controls via digital interfaces like PROFIBUS-DP, DeviceNet, and CANopen. Key features include storing motion sequences and profiles, synchronization to a master encoder, digital and analog inputs/outputs, and flexible connectivity options.
The document provides information about wireless M2M-IoT solutions from MTX-M2M, including Java-enabled M2M modems, Linux platforms, routers, and accessories. MTX-M2M offers a range of modem products powered by Cinterion modules that support 2G, 3G, and 4G cellular networks with features like GPS, WiFi, Bluetooth, and various interfaces. Their Java-enabled modems can run custom applications and connect devices for M2M/IoT scenarios.
VLT® Micro Drive is a genuine VLT® frequency converter with unsurpassed reliability, user-friendliness, condensed functionality, and extremely easy to commission. Terminal numbers are named in the same manner as in the rest of the VLT® family. It’s developed and manufactured by Danfoss Drives, the leading drives experts since 1968 and creators of VLT® – The Real Drive. For more info, visit http://www.danfoss.in/
This document provides instructions for installing, calibrating, and using an ED3 SkidWeigh Plus on-board check weighing system with a mobile Zebra label printer. The system consists of a digital indicator, pressure transducer, and optional Zebra printer. Installation involves mounting the indicator and transducer, making electrical and hydraulic connections. Calibration is done through an administration menu by setting the date/time, vehicle ID, and saving data to a USB drive. The system weighs loads by measuring hydraulic pressure when lifts occur.
This document provides installation and operation instructions for the SSM23Q/IP integrated step-servo motor. It includes:
1. An overview of the motor's features such as torque capabilities, control modes, inputs/outputs, and Ethernet communication.
2. Instructions for installing the necessary software, mounting the motor, and choosing an appropriate power supply.
3. Details on connecting the power supply, connecting the motor to a PC over Ethernet, and descriptions of the input and output connections.
4. Contact information for support.
Ed3 at v133 Lift truck onboard weighing scaleTed Jurca
This document provides installation and calibration instructions for the ED3-AT SkidWeigh Plus on-board check weighing system. It describes how to install the digital indicator, pressure transducer, and make electrical connections. It also explains how to enter the administration menu to calibrate the weighing function and set the date, time, and vehicle ID number. Safety precautions are provided regarding disconnecting batteries and securely mounting components.
The document is a letter from Rotembecky Limited introducing themselves as an engineering services provider. They offer services including engineering design, installation, automation, generator installation and maintenance. They aim to provide customized solutions and quick responses to meet clients' engineering needs. Some of their clients include major banks and companies. They are looking to establish a business relationship with the recipient.
The document provides troubleshooting and maintenance instructions for a CashCode bill validator. It includes performing self-diagnostics to check for errors, adjusting DIP switch settings to configure denominations and modes, cleaning to prevent jams and improve performance, and updating software using memory cards or USB. Contact information is provided for additional support.
This document is a user manual for Servo Tech Middle East Co. Ltd.'s AC servo drives models SR, TSDA, and SD. It contains information about unpacking, relocating, safely installing, and dimensions of the drives. Chapter 1 provides an introduction and technical specifications. Chapter 2 details system wiring, including an overview of connectors and pinouts. Chapter 3 covers panel operation such as mode selection and auxiliary functions. Chapter 4 lists possible alarm codes.
Ls catalog thiet bi tu dong ss7 e_110530_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
This document provides a block diagram and component list for a computer motherboard. The block diagram shows the system architecture including major components like the CPU, chipset, memory slots, graphics, and I/O. It depicts the connections between components and power delivery. Tables provide details on the integrated pull-ups/downs for chipset pins and strap pin functions for the chipset.
This document provides a summary of industrial robot options from Mitsubishi Electric, including:
1) It lists the main robot models, controllers, software, interfaces and other optional equipment available from Mitsubishi Electric for industrial robots.
2) It provides basic details on the RV-1A and RV-2AJ robots such as their dimensions, specifications and application examples.
3) It includes diagrams showing the layout and dimensions for installing the robot base and attaching hands.
The document provides a quick reference guide for parameter settings of the P7 Drive. It lists the parameter numbers, factory settings, and space for user settings. There are warnings and cautions provided about safely installing and operating the drive. The introduction describes the drive's applicability for HVAC applications and its communication capabilities.
The document provides instructions for three network alarm panels: HB-2050G, HB-4040G, and HB-5050G. It describes the connections, technical specifications, and functions of each panel. It also provides guidance on setting up the corresponding mobile app, including configuring account and alarm settings, adding detectors and remote controls, and setting arming schedules. The document instructs users on reading the LCD displays and indicator lights to understand the panel's status.
This document is a user manual for a long-life GPS tracker. It describes the tracker's features such as long battery life, magnetic installation, dual GPS/LBS positioning, and setting/tracking via web, app, or SMS. It provides instructions on installation, including inserting the SIM card and installing the tracker. It also covers status indicators, setting/inquiry methods, troubleshooting, and warranty information.
The document summarizes an installation and operation manual for a vehicle security system that sends text messages and GPS data to a mobile phone. It alerts the owner if the vehicle alarm sounds or the battery is disconnected, and allows requesting the current GPS location via text. The manual provides instructions on initialization, controlling outputs, requesting GPS data, changing passwords, testing and installing the system.
MGT90 magnetic GPS Tracking System for cars is an intelligent vehicle tracking and security system used in business traffic, logistics distribution, automobile lease, intelligent transportation, and many other applications.
This document is a user manual for King Pigeon's GSM SMS Controller alarm systems. It describes the features and functions of the S130, S140, and S150 models, which allow users to remotely monitor and control equipment via SMS text messages. The manual provides setup instructions, a list of SMS commands, and specifications for the alarm systems. It also contains safety guidelines and describes the various inputs, outputs, and components of the controller units.
1. The document provides steps for safely conducting an on-site equipment swap at a Mobilink site.
2. It outlines 11 required steps, including obtaining approvals, using proper safety equipment, preparing materials, validating the site environment, and verifying connections before and after the swap.
3. Engineers are instructed to follow all rules, only access sites with approval, and contact support if any issues arise during the swap.
GSM GPRS sim900 a modem with aurdino compatibleRaghav Shetty
This is a very low cost and simple Arduino GSM and GPRS shield. We use the module SIMCom SIM900A.
The Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions to start controlling your world through the internet. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages
IRJET- Solar Powered Smart Helmet with MultifeaturesIRJET Journal
This document describes the design of a smart helmet with multiple safety features. The helmet uses sensors to detect alcohol levels, speed, and accidents. It contains a microcontroller, GPS module, GSM modem, and RF transmitter and receiver to communicate with a bike. If an accident is detected, the helmet sends an alert message with the location to emergency contacts. It also checks for helmet wearing and prevents bike ignition if alcohol is detected, aiming to reduce accidents caused by no helmet or drinking. The system provides safety and real-time monitoring for bikers.
ANTI-VEHICLE TRACKING SYSTEM USING SMARTPHONE APPLICATION DrunkenSoul
This document describes the design of a vehicle tracking system using GPS and GSM technologies along with a smartphone application. The system has two main units - a vehicle unit that tracks the vehicle's location using a GPS module and transmits it via GSM/GPRS to a remote server, and a monitoring unit where the user can track the vehicle on a smartphone application. The system aims to provide security for parked vehicles and allow users to locate a stolen vehicle. It was designed using an Arduino microcontroller, GPS and GSM modules, and can find various applications like fleet management and monitoring drivers.
The document provides product information for the Symmetricom 58532A GPS L1 Reference Antenna. It includes specifications for the antenna such as its frequency range, gain, noise figure, power requirements, and environmental operating conditions. It also describes the antenna's features such as its durable design, high gain, narrow bandwidth, and built-in protection from surge voltages. Additional information is given on ordering, payment, shipping, warranty and repair services available from the seller, Launch 3 Telecom.
This product is with GPS module and GSM module, that has many new and unique functions, such as super power saving technology, LBS locate technology (without GPS signal), real time uploading current location to server (user can control working mode), check current location bu SMS or app on mobile phone or website etc. It contains high capacity rechargeable polymer battery (900mAH), standby time can reach 12 days (working mode 1, report mode 0). User can control different working mode for different using (real time mode or standby mode) , it can work without platform, just send SMS to check current location, also it can upload location to sever by user setting time interval, and user can check current location & playback history tracking on mobile app or PC web visiting. This GPS tracker is mini size, and easy to use, it is suit for kids, old parents, pets and outdoor workers tracking.
S264~s266 temperature data logger user manual v2.1... Gorch
Here are the steps to configure the basic settings:
1. Click "Read setting" to load the existing settings before making any changes.
2. Check or uncheck "Arm automatically when power on" based on your preference.
3. Check or uncheck "Add timestamp to alarm SMS" based on your preference.
4. Check or uncheck "Press * or # to stop Dial" based on your preference and device model.
5. Enter a number between 0-65535 for "Device ID". This is optional for identification.
6. Enter a description for "Device description", such as the installation location.
7. Click "Write setting" to save the basic settings to
This document provides a user manual for a CT-1016-5G 16 Bands Antenna Jammer. It lists accessories including the main unit, power adapter, car charger, and 16 omni antennas. It describes how to install and operate the device, noting the device should be kept away from electronics when powered on. Temperature operating ranges and battery recharging procedures are also outlined. Frequency bands for both European and American models are defined.
The document provides instructions for installing and configuring the Ursalink UR71 industrial cellular router. It describes:
1) Unpacking the package contents and an overview of the router hardware.
2) Installing the SIM cards, antennas, power supply, and mounting the router.
3) Connecting a computer to access the router's web GUI and configure the cellular connection by selecting network settings.
This document provides installation and operating instructions for a vehicle mobile DVR. It describes how to install the SIM card, SD cards, GPS antenna, power cable, video output cable, alarm input cables, RS232/RS485 cables, and camera connections. It also provides guidance on basic device setup options like date/time, network settings, recording schedules, alarm settings, and search/playback of recorded video.
MTX M2M catalog 2015 IoT, Internet of ThingsMTX M2M
MTX M2M is M2M IoT, Internet of Things, solution, GSM/GPRS-UMTS/HSPA modems, routers and gateways. MTX M2M radio modem enable machines, devices and vehicles to communicate using 2G, 3G or 4G networks. End applications are remote control, telemetry, MESH network, alarms, security, metering and many others. MTX M2M are intelligent wireless modems as they have Linux or JAVA programming capabilities.
This document provides information about a GM03CW car GPS tracker, including:
1. An overview of the product components, interfaces, and indicator light meanings.
2. Specifications and functions of the tracker, such as location accuracy, communication methods, and battery life. It also describes functions like time tracking, speed alarms, and low power modes.
3. Instructions for installation, setup via SMS, and common troubleshooting issues like poor signal location.
4. Customer support information like warranty details and after sales service contact options.
The document describes the design of an advanced car security system using RFID, GSM, and an Arduino board. The system is intended to prevent car theft by only allowing an authorized RFID card to start the car. If an unauthorized card is used, the system will send a call to the owner's phone using GSM and stop the car once the owner responds. The document outlines the components, design, block diagram, and results of testing the system. It concludes that the system enhances car security while allowing for authorized access.
Similar to Tk116 user mannual min gsp vehicle tracker (20)
Wayanad-The-Touristry-Heaven to the tour.pptxcosmo-soil
Wayanad, nestled in Kerala's Western Ghats, is a lush paradise renowned for its scenic landscapes, rich biodiversity, and cultural heritage. From trekking Chembra Peak to exploring ancient Edakkal Caves, Wayanad offers thrilling adventures and serene experiences. Its vibrant economy, driven by agriculture and tourism, highlights a harmonious blend of nature, tradition, and modernity.
You can easily change/correct a name on your flight ticket under the American Airlines name change policy. The airline provides multiple online and offline modes to place a name change request. To learn more about how to change a name on American Airlines ticket, you can directly approach the airline’s customer support. Moreover, you can connect with a flight expert at +1-866-738-0741 for quick assistance.
Un viaje a Buenos Aires y sus alrededoresJudy Hochberg
A travelogue of my recent trip to Argentina, most to Buenos Aires, but including excursion to Iguazú waterfalls, Tigre, and Colonia del Sacramento in Uruguay
How do I plan a Kilimanjaro Climb?
Planning to climb Mount Kilimanjaro is an exciting yet detailed process. Here’s a step-by-step guide to help you prepare for this incredible adventure.
Our excursions in tahiti offer stunning lagoon tours, vibrant marine life encounters, and cultural experiences. We ensure unforgettable adventures amidst breathtaking landscapes and serene waters. For more information, mail us at tracey@uniquetahiti.com.
What Challenges Await Beginners in SnowshoeingSnowshoe Tahoe
Discover the exhilarating world of snowshoeing through our presentation, highlighting the challenges faced by beginners. From physical exertion to technical finesse and braving harsh winter conditions, each step in the snow brings new obstacles and unforgettable adventures. Embrace the challenge and conquer the winter wonderland with confidence!
Discovering Egypt A Step-by-Step Guide to Planning Your Trip.pptImperial Egypt
Travelling to Egypt is like stepping into a time capsule where the past and present coexist, offering a unique blend of history, culture, and stunning landscapes.
See more: https://imperialegypt.com/tour-packages/
Assessing the Influence of Transportation on the Tourism Industry in Nigeriagsochially
This research dissertation investigates the complex interplay between transportation and the tourism industry in Nigeria, aiming to unravel critical insights that contribute to the enhancement of the overall tourist experience. The study employs a multi-faceted approach, literature review establishes a robust theoretical framework, incorporating The Service Quality and Satisfaction Theory to guide the research questions and hypotheses.
The methodology involves the distribution of a structured questionnaire, ensuring a representative sample and facilitating a comprehensive analysis of the gathered data.
Key findings include the nuanced perceptions of transportation infrastructure adequacy, safety and security concerns, financial influences on travel decisions, and the cultural and ecological impacts of transportation choices. These findings culminate in a comprehensive set of recommendations for policymakers and practitioners in the Nigerian tourism industry. The findings contribute to the existing literature by providing actionable insights for policymakers, stakeholders, and researchers in the Nigerian tourism sector.
The recommendations encompass gender-sensitive planning, infrastructure enhancements, safety measures, and strategic interventions to address financial constraints, ensuring a holistic and sustainable development of the tourism industry in Nigeria.
Author: Imafidon Osademwingie Martins
How To Change Your Name On American Airlines Aadvantage.pptxedqour001namechange
American Airlines permits passengers to change/correct names on their AAdvantage account. Also, you can request a name change both online via a web portal and offline over the phone. For further information on how to change your name on American Airlines Advantage, get in touch with the airline’s customer service. Also, you can reach out to a consolidation desk at +1-866-738-0741 for quick assistance.
Best Places to Stay in New Brunswick, Canada.Mahogany Manor
New Brunswick, a picturesque province in eastern Canada, offers a plethora of unique and charming places to stay for every kind of traveler. From the historic allure of Fredericton and the vibrant culture of Saint John to the natural beauty of Fundy National Park and the serene coastal towns like St. Andrews by-the-Sea, there's something for everyone. Whether you prefer luxury resorts, cozy inns, rustic lodges, or budget-friendly options, the best places to stay in New Brunswick ensure a memorable stay, allowing you to fully immerse yourself in the province's rich history, stunning landscapes, and warm hospitality.
https://www.mmanor.ca/blog/best-5-bed-and-breakfast-new-brunswick-canada
2. Welcome to use our terminal ,
please read this manual carefully to
install and operate the terminal exactly.
This user manual is for reference only. If
some contents and operation steps
are inconsistent with those for the
actual product, the latter will prevail.
Using TK116 GPS tracker, we can
position 、 monitor and control the
vehicle on the position server via
GPRS、GPS and Internet. It can help
customers to manage
transparently、reduce cost、maintain
security and raise efficiency. Now it is
widely used in business traffic、logistics
distribution 、 automobile lease 、
intelligent transportation 、 shipping
market、army and police、rescuing、
Safety Supervision 、Intelligent city…
- 2 -
3. Catalog
一、Product Features ..................... 1
二、Components and Accessories . 2
三、Environment for use ............... 3
四、Technical Specifications ..... 4
五、Installation ............................. 5
5.1Before Installation.............. 5
5.2 Install the terminal ............ 9
5.3 Terminal wiring definition
................................................... 11
5.4 Terminal wiring diagram...... 13
六、Attentions for wiring ......... 16
6.1 Power cables................... 16
6.2 External MIC..................... 16
6.3 SOS cables ....................... 16
七、Set up the terminal ............. 17
八、Use the terminal ................... 17
8.1 Power on........................... 17
8.2 Inquiry position ................ 17
8.3 SOS alarm ......................... 18
- 3 -
4. 8.4 Monitor .............................. 18
8.5 Cut off the fuel pump
connection............................. 18
8.6 Recover the fuel circuits19
九、Login the position server . 19
十、Trouble shooting ................... 19
10.1 Cannot connect to the
position server ........................ 19
10.2 Show offline status on
the position server................. 20
10.3 Cannot position for a
long time ................................. 21
10.4 Position drift is serious... 21
10.5 Instructions receiving
abnormally ............................. 22
十一、Warranty rules ................... 22
11.1 Special statement........ 22
11.2 Warranty period ........... 22
Customer’s Information ................ 24
- 4 -
5. 一、Product Features
■ Supports quad bands, i.e.
850/900/1800/1900MHz, universal in
the world.
■Wide Input Voltage:6-36V DC.
■ Supports single positioning and feedbacks
position via GPRS at setting times.
■Supports vehicle positioning and tracking.
■Supports ACC status checking and vehicle status
notifying.
■Use relay to remote control the vehicle..
■Use SOS button for SOS call.
■Use external MIC to monitor remotely.
- 1 -
7. ■ Accessories(reference pictures)
Power Cables(Fault) MIC(Optional)
( (
Relay Optional) SOS Cables Optional)
三、Environment for use
1、 Limited working temperature:-20℃~80℃
2、 Storage temperature:-45℃~90℃
3、 Humidity:<95%
4、 Atmospheric pressure:86kPa~106kPa
5、 Make sure the terminal is installed in rainproof
and snow-proof places.
- 3 -
8. 四、Technical Specifications
■Basic Specifications:
Voltage 12VDC/24VDC
Standby Current <3mA
Work current <30mA
GPS positioning
15m
accuracy
GSM positioning
100m
accuracy
GPS Frequency 1575MHz
GSM Frequency 850/900/1800/1900MHz
Hot/warm/cold start time <3s,<15s,<60s
L*W*H :
Dimensions (mm)
79.5X38.5X10.5
Weight 45 g
■ LED Indicators
Blue LED/GPS
Red LED/GSM
- 4 -
9. 1、Red LED(indicates GSM working state)
0.2s on and o.2s off Searching for GSM
(fast flicker) network
0.2s on, 3s off GSM/GPRS works
(intermittently flicker) normally
2、Blue LED(indicates GPS signal state)
0.2s on and o.2s off Searching GPS
(fast flicker) Satellites
0.2s on, 3s off
GPS works normally
(intermittently flicker)
五、Installation
5.1Before Installation
5.1.1 Open the packing case, then check if the
terminal is Ok and the accessories are intact, or
please contact your dealer;
5.1.2 Choosing a SIM card: You need a
suitable SIM card for using the terminal, please
contact your dealer if you have any question;
5.1.3 Install the SIM card: First use your
thumb to press the SIM card cover, then push it
outside to pull down the SIM card cover. Now you
can insert your SIM card to the SIM card connector
until you cannot move the card inside anymore.
5.1.4 Uninstall the SIM card:Lift up the edge
of the SIM card, next pull it out.
- 5 -
11. ●Install SIM Card(two steps)
First、Insert the SIM card until cannot move it inside
anymore;
Second、Pull the SIM card back a bit;
- 7 -
12. ●Uninstall the SIM card
First、Lift up the edge of the SIM card;
Second、Pull out the SIM card.
5.1.4 Notice
●Please cut off the power before installing or
uninstalling the SIM card.
●The SIM card should support GPRS and the
GPRS should be opening.
●Inquiry by call needs the SIM card supporting the
calling line identification presentation.
●If you enable the PIN code of the SIM card,
please use your mobile phone to disable the PIN
code.
- 8 -
13. ● Please make sure that the SIM card has
sufficient balance.
5.2 Install the terminal
5.2.1 Suggest to install the terminal concealed by
the dealer designated professional body.
Please make sure to install the terminal with this
side upward, and use wide strong double-sided
adhesive sponge to fix it.
Please make sure to install the terminal with this
side towards the ground, and use wide strong
double-sided adhesive sponge to fix it.
5.2.2 Notice
●Hide the terminal properly inside the car body in
- 9 -
14. order to avoid damages.
● Keep the terminal away from RF emission
sources such as backing radar、car burglar alarm
and other vehicle mounted communication devices.
● Suggest to use wide strong double-sided
adhesive sponge to fix it, or use cable ties and
other liable methods to fix it.
●Make sure the face upward as the terminal has
internal GPS and GSM antenna and without
metal blocks. Suggest to install the terminal in
the following places:
1) hiding place below the front windshield
The
trim panel;
2)The hiding place around the front dash(if
the surface is not made of metal);
3)The place under the rear windshield;
Notice: The GSM and GPS signal may be
weakened if there is metal thermal insulation layer
or heating layer on the front windshield, the terminal
may work abnormally, so please change the place
to install the terminal.
- 10 -
17. 5.3.2 Other accessories’ interfaces
5.4 Terminal wiring diagram
Relay wiring diagram shows how to wire the
relay to control the fuel pump:
5.4.1 Connect the 85 terminal(with small white
cable) to the positive pole of the vehicle
power(+12V/+24V), connect the 86 terminal(with
small yellow cable) to the 4# cable of the terminal.
5.4.2 Cut off the positive pole of the fuel pump, next
serial connect the positive pole to the 87a
terminal(with think green cable) of the relay, and
connect another pole to 30 terminal(with think green
- 13 -
18. cable), showing as in the figure.
Notice: Be sure that the voltage of the vehicle
power should match up to the working voltage of
the relay, or the relay will be damaged.
Relay Wiring:
Bottom of the relay
- 14 -
20. 六、Attentions for wiring
6.1 Power cables
6.1.1The standard input voltage of the terminal is
6V-36VD, so please choose the our original power
cables, the red cable is positive and the black
cable is negative; Please ground the positive pole
separately or ground it to ground connection, not
to any other ground.
6.1.2 Connect the ACC cable (orange cable) to
ACC switch of the vehicle, then the position server
can get the information about the vehicle power; the
ACC cable can also be connected directly to the
positive pole of the vehicle power, then the position
server think that the vehicle is always ignited.
6.1.3 Connect the 4# cable (yellow cable) to the 86
terminal(with small yellow cable) of the relay. Use
cable ties to fix the relay to waterproof place, or
use plastic bags to cover the relay..
6.2 External MIC
Using the external MIC cables we can have
remote voice monitoring; stick the MIC to some
places where we can make a call.
6.3 SOS cables
Using SOS cables we can make SOS call.
Please stick the SOS switch to the place where the
driver can touch.
- 16 -
21. 七、Set up the terminal
Please refer to the 《 Operation
Commands》
八、Use the terminal
8.1 Power on
Power on: insert a valid SIM card and wire all
the cables, then the terminal power on itself.
8.2 LED indicators
The red LED flickers fast when the terminal is
searching for GSM network, it flickers
intermittently when the terminal has registered the
GSM network successfully.
The blue LED flickers fast when the terminal is
searching for the GPS satellite signal, it flickers
intermittently when the terminal when the
terminal has searched the satellites and can be
positioned.
8.2 Inquiry position
8.2.1 Inquiry by SMS
You can write a positioning SMS sending to the
terminal when inquiring position, the terminal will
reply position SMS or map link. The SMS
commands please refer to the 《 Operation
Commands》 。
8.2.2 Inquiry by position server
- 17 -
22. Customer can login the position server to
check the position of the vehicle. Please ask your
dealer for the WWW address of the position server.
8.3 SOS alarm
Press the SOS button for 3 seconds when an
emergency situation need help, SOS alarm will be
triggered. The terminal will call the preset manager
numbers circularly until it is answered; and it will
send alarm SMS to the preset manager numbers, it
can also send alarm SMS to the position server.
Notice: SMS and SOS call need preset manager
numbers.
8.4 Monitor
When the preset manager numbers call the
terminal, the terminal will auto-answer after 8
seconds ringing, then you can monitor the voice in
the vehicle. When using the numbers which are not
belong to the managers, the terminal will not
auto-answer.
Notice: This function needs preset manager
numbers.
8.5 Cut off the fuel pump
connection
The position server or the managers can send
cut-off fuel commands when needed. The fuel
of the vehicle will be cut off on the premise of
- 18 -
23. safety, and the vehicle will not be powered on.
To make sure the safety of the vehicle, the
fuel of the vehicle will be cut off only if the terminal
has positioned by GPS and the speed of the vehicle
is less than 20KM/h or the vehicle is not moving.
8.6 Recover the fuel circuits
The position server or the managers can send
recover-fuel-circuit commands to the terminal
when needed, the terminal will recover the
fuel circuits of the vehicle.
九、Login the position server
If you have a legal ID on the position server,
you can login the position server using browser.
If not, please contact your dealer. Ask your
dealer to provide an ID and the password.
Now open the web site, use your ID and
password to enter the position server.
Notice: Please get the instructions
about the position server from your
dealers.
十、Trouble shooting
10.1 Cannot connect to the
position server
The terminal is never online on the position
- 19 -
24. server when installed at the first time. Please check
the terminal:
1)If the power cables are wired correctly? Pay
attention to not connect them to the controlling
cables of the vehicle.
2) the SIM card is installed correctly? Please refer
If
to the installation instructions.
3)Check the status of the LED indicators. If the
terminal is OK, the red LED and the blue LED will
intermittently flick.
4) Inquiry the parameters of terminal via commands
and check the accuracy of the parameters.
10.2 Show offline status on the
position server
First check if the LED indicators are OK, if
cannot check them, you can check the SIM card
following next steps:
1) the SIM card of the terminal and check if you
call
can hear the connect ring.
2)Check if the vehicle is in the area where there is
no GSM signal.
3)Check if one terminal or all terminals are offline
in the area where terminal is offline. If all
terminals are offline, you should ask the network
operator. If the network is OK.
4)Check if the SIM card has enough balance.
- 20 -
25. 5)If the terminal becomes offline on the last day of
one month, please check if GPRS is close.
6)Inquiry the parameters of terminal via commands
and check the accuracy of the parameters.
10.3 Cannot position for a long
time
If the GPS is active, but the terminal cannot
be positioned for long time, please check the
terminal:
1)If the vehicle is in the place where there is no
GPS signal.
2)The upside of the terminal should be installed
with face toward the sky.
3)The GSM and GPS signal may be weakened if
the terminal is installed in the place with
electromagnetic wave absorption material(such as
metal blocks), special attention should be paid if
there is metal thermal insulation layer or heating
layer on the front windshield, so that the position
accuracy will decline, and the severe ones will not
be positioned.
10.4 Position drift is serious
Serious position drift will be found in places
where GPS signal is poor. Please drive the vehicle
to the open places.
- 21 -
26. 10.5 Instructions receiving
abnormally
1)Check the instructions format.
2)Check if the vehicle is in the places where there
is GSM signal.
3)Check if the SIM card is properly installed.
十一、Warranty rules
11.1 Special statement
1)Technology change, without notice.
2) If the color and appearance are
inconsistent with those for the actual
product, the latter will prevail.
3)Warranty card is only valid for the
terminals with the following IMEI.
4)Please take care of the warranty
card and show it with the original
purchase receipts when enjoying the
warranty service.
11.2 Warranty period
Since the date of purchase,
passive waste host has one year
warranty.
- 22 -
27. 11.3 After sales
Any of the following circumstances
not covered by the warranty, but
may be appropriate to pay repair:
(一)More than the warranty period.
(二)Unauthorized removal or repair
damaged.
( 三 ) Damage caused by improper
installation, use, maintenance,
custody.
(四)The IMEI label is torn or Obscure.
(五)Warranty certificate and product
models do not match or warranty
certificate be altered.
( 六 ) Damage caused by force
majeure.
- 23 -