The document summarizes an installation and operation manual for a vehicle security system that sends text messages and GPS data to a mobile phone. It alerts the owner if the vehicle alarm sounds or the battery is disconnected, and allows requesting the current GPS location via text. The manual provides instructions on initialization, controlling outputs, requesting GPS data, changing passwords, testing and installing the system.
This document provides a user guide for the Sonim Enduro mobile phone. It begins with general information such as copyright and disposal instructions. It then provides safety guidelines regarding battery use, medical devices, and emergency calls. The guide instructs users on getting started with the phone as well as managing calls, contacts, messages, files and various phone settings and features. It concludes with sections on accessories, warranty and other technical information.
Wireless Nurse Calling System
NO Installation, the nurse calling system is ready to use the very next moment it is powered up
NO Maintenance
No Wiring
Simple to use (press button on remote to alert nurse / attendant)
Cost effective solution (much less cost than wired system, no wiring cost, no installation cost, no maintenance cost)
Reliable, Useful and cost effective solution
Floors with even 2 beds or even up to 100 beds can use the facility
Running successfully in more than 500 hospitals, dispensaries and offices across the world (more than 50% only in India)
Wireless Remotes (Patient calling point)+ Console Receiver (nurse station) + Repeater (signal booster) to increase range of communication
FORBIX SEMICON is a pioneering company among nurse calling system manufacturers and nurse calling system s
This document provides instructions for using an A9 user tracking device. It explains how to install and set up the device, including inserting a SIM card, charging the battery, and downloading a mobile app. The manual describes the device's functions such as real-time tracking, geo-fencing, emergency calls, and voice monitoring. It also covers setting time zones, languages, and APNs for international use.
This is a reprint of the US Access Board Section 508 (ICT Refresh), which adds headings. It includes Chapter 4 (Hardware), Chapter 5 (Software), and Chapter 6 (Support Documentation and Services).
Deepak Bhojwani's document discusses mobile phone jammers. It defines a mobile phone and mobile phone jammer. A mobile phone jammer prevents cellular phones from receiving signals by transmitting interfering radio waves on the same frequencies. The document describes the components, design parameters, and techniques of mobile phone jammers. It provides examples of jammer applications and concludes that while jammers have beneficial uses, they can also cause problems depending on the situation.
The document discusses intrinsically safe mobile phones from ecom instruments for use in hazardous areas. It describes the new Ex-Handy 08 phone which provides high performance capabilities and software/network compatibility. The phone has a 3-year no-questions-asked warranty and features like a camera, flashlight, and push-to-talk communication. It also discusses the Ex-HSPA 08 phone which adds Near Field Communication and is approved for use in Zone 2 hazardous areas. Finally, it summarizes ecom's lone worker protection functionality which uses sensors and alarms to monitor workers and trigger emergency responses if needed.
This document provides information about the Zipato Mini Keypad RFiD/Z-Wave product. It includes sections on trademarks, safety notices, introduction, technical specifications, mounting instructions, including/excluding from a Z-Wave network, control functions using user codes, and supported Z-Wave command classes. The document provides detailed instructions and specifications for setting up and operating the Zipato Mini Keypad RFiD/Z-Wave product.
The document summarizes an installation and operation manual for a vehicle security system that sends text messages and GPS data to a mobile phone. It alerts the owner if the vehicle alarm sounds or the battery is disconnected, and allows requesting the current GPS location via text. The manual provides instructions on initialization, controlling outputs, requesting GPS data, changing passwords, testing and installing the system.
This document provides a user guide for the Sonim Enduro mobile phone. It begins with general information such as copyright and disposal instructions. It then provides safety guidelines regarding battery use, medical devices, and emergency calls. The guide instructs users on getting started with the phone as well as managing calls, contacts, messages, files and various phone settings and features. It concludes with sections on accessories, warranty and other technical information.
Wireless Nurse Calling System
NO Installation, the nurse calling system is ready to use the very next moment it is powered up
NO Maintenance
No Wiring
Simple to use (press button on remote to alert nurse / attendant)
Cost effective solution (much less cost than wired system, no wiring cost, no installation cost, no maintenance cost)
Reliable, Useful and cost effective solution
Floors with even 2 beds or even up to 100 beds can use the facility
Running successfully in more than 500 hospitals, dispensaries and offices across the world (more than 50% only in India)
Wireless Remotes (Patient calling point)+ Console Receiver (nurse station) + Repeater (signal booster) to increase range of communication
FORBIX SEMICON is a pioneering company among nurse calling system manufacturers and nurse calling system s
This document provides instructions for using an A9 user tracking device. It explains how to install and set up the device, including inserting a SIM card, charging the battery, and downloading a mobile app. The manual describes the device's functions such as real-time tracking, geo-fencing, emergency calls, and voice monitoring. It also covers setting time zones, languages, and APNs for international use.
This is a reprint of the US Access Board Section 508 (ICT Refresh), which adds headings. It includes Chapter 4 (Hardware), Chapter 5 (Software), and Chapter 6 (Support Documentation and Services).
Deepak Bhojwani's document discusses mobile phone jammers. It defines a mobile phone and mobile phone jammer. A mobile phone jammer prevents cellular phones from receiving signals by transmitting interfering radio waves on the same frequencies. The document describes the components, design parameters, and techniques of mobile phone jammers. It provides examples of jammer applications and concludes that while jammers have beneficial uses, they can also cause problems depending on the situation.
The document discusses intrinsically safe mobile phones from ecom instruments for use in hazardous areas. It describes the new Ex-Handy 08 phone which provides high performance capabilities and software/network compatibility. The phone has a 3-year no-questions-asked warranty and features like a camera, flashlight, and push-to-talk communication. It also discusses the Ex-HSPA 08 phone which adds Near Field Communication and is approved for use in Zone 2 hazardous areas. Finally, it summarizes ecom's lone worker protection functionality which uses sensors and alarms to monitor workers and trigger emergency responses if needed.
This document provides information about the Zipato Mini Keypad RFiD/Z-Wave product. It includes sections on trademarks, safety notices, introduction, technical specifications, mounting instructions, including/excluding from a Z-Wave network, control functions using user codes, and supported Z-Wave command classes. The document provides detailed instructions and specifications for setting up and operating the Zipato Mini Keypad RFiD/Z-Wave product.
o Positioning and Tracking Cars by SMS
o Emergency Alarm, Power Off Alarm
o Movement Alert, Over Speed Alert
o Geo-fence to restrict the car move within a district.
o Restart the vehicle by SMS.
This document provides installation and operation instructions for the Defender Series IM3 lift truck impact monitoring system. It describes how to install the unit, set up impact thresholds, program authorized operator IDs for vehicle access control, and operate the system. The system includes an indicator unit that displays impact levels and time/date, along with accessories like wiring harnesses and data loggers. Only qualified technicians should perform installations following accepted safety practices.
This document proposes a smart security system for automobiles using Internet of Things (IoT) technology. The system would secure vehicles by detecting unauthorized activity using sensors like an ignition sensor. It could be controlled remotely via a smartphone app, allowing users to lock their vehicle or track its location using GPS. The system would use technologies like Arduino, PIC microcontrollers, GSM boards, and sensors for temperature, humidity, IR, cameras, magnets and motion. Data captured from IoT sensors could be analyzed on platforms like IBM Bluemix using Hadoop for distributed processing. This smart security system offers advantages like low cost, compatibility with existing tech, applicability even in remote areas, and enhanced security for vehicles.
Motorola MotoTRBO Handheld Control Head (HCH) PLMN7131 Basic Service Manual (...TwoWayDigitalRadio.com
The document provides information about MOTOTRBOTM professional digital two-way radios and their handheld control heads. It covers maintenance procedures for the control heads down to the board replacement level. It includes disassembly and reassembly instructions, exploded views, parts lists, and basic troubleshooting steps. Safety notices are provided regarding RF energy exposure compliance and handling of CMOS and LDMOS devices during repair work.
This document provides instructions for setting up and using a NEO CoolCam motion sensor that communicates using the Z-Wave wireless protocol. It includes steps for inserting batteries, including the sensor in a Z-Wave network, configuration parameters to customize sensor settings, and technical specifications. The sensor detects motion and sends notifications to associated Z-Wave devices.
The document describes the design of an advanced car security system using RFID, GSM, and an Arduino board. The system is intended to prevent car theft by only allowing an authorized RFID card to start the car. If an unauthorized card is used, the system will send a call to the owner's phone using GSM and stop the car once the owner responds. The document outlines the components, design, block diagram, and results of testing the system. It concludes that the system enhances car security while allowing for authorized access.
The document describes a vehicle security system project created by students. The system uses GPS and GSM modules to track vehicle location and block the fuel tank and steering via mobile application if an unauthorized person tries to use the vehicle. It was created to address vehicle theft. The project involved research on components, developing prototypes, and creating class, use case, and sequence diagrams to design the system and mobile application. The goal was to allow vehicle owners to monitor and control their vehicle remotely via a mobile app.
MGT90 magnetic GPS Tracking System for cars is an intelligent vehicle tracking and security system used in business traffic, logistics distribution, automobile lease, intelligent transportation, and many other applications.
This document describes a DTMF controlled robot that can be operated without a microcontroller. The robot uses two mobile phones, where one phone calls the other phone attached to the robot. When buttons are pressed on the calling phone, DTMF tones are generated and received by the robot phone. A DTMF decoder chip processes the tones and sends signals to a motor driver chip to control two motors on the robot chassis. This allows the robot to be remotely controlled over a phone network from long distances without requiring complex coding or a microcontroller.
The document provides answers to frequently asked questions about GPS trackers. It covers questions about SIM cards, registration, location tracking via SMS and online, and recommended upload commands. Key points addressed include:
- Recommending M2M SIM cards for lower cost without voice functions. GPRS and caller ID must be enabled.
- Troubleshooting a flashing green light by checking the SIM and signal strength.
- Verifying the SIM works by calling the device number or checking SMS replies.
- The importance of setting the correct APN for data uploads and the format for commands.
- Reasons a device may reply with LBS not GPS locations and steps to improve GPS reception.
- How to view real
The document is a user manual for the FLIR LS-X/R thermal monocular. It provides instructions on charging the device, operating controls like power, brightness and zoom functions, and maintaining the device. The manual also outlines different color palettes, auto power off settings, and compliance information.
This document describes the components and applications of a mobile controlled robotic car. The key components are an ATmega 16 microcontroller, chassis, mobile phone, batteries, DTMF decoder module, DC gear motor, wheels, and IR proximity sensor. The microcontroller controls the car and detects obstacles using the IR sensor. The DTMF decoder receives control signals from a mobile phone via DTMF tones. Potential applications mentioned include spying, edge/obstacle avoidance, path following, cleaning, monitoring, search and rescue, and hazardous environments work.
The peer-reviewed International Journal of Engineering Inventions (IJEI) is started with a mission to encourage contribution to research in Science and Technology. Encourage and motivate researchers in challenging areas of Sciences and Technology.
This document provides a synopsis for a project titled "Cell Phone Operated Land Rover". The project aims to control a land rover using a mobile phone. A mobile phone would be connected to a microcontroller and DTMF decoder onboard the rover. When buttons are pressed on the calling phone, DTMF tones are generated and received by the rover, decoded into instructions for the microcontroller to drive motors accordingly. The synopsis outlines the motivation, objectives, methodology, expected timeline and potential impact of using mobile phone control for remote vehicles in academics and industry.
DTMF Controlled Robot Car WITHOUT using MICROCONTROLLERVishwanath Neha
This document describes a DTMF controlled robot project created by a team of students under the guidance of O.SRIKANTH. The robot uses two mobile phones, where one phone calls the other phone mounted on the robot to control it through DTMF tones. When buttons are pressed on the calling phone, corresponding tones are received by the robot phone and processed by a DTMF decoder chip to operate motors via a motor driver chip. Potential applications are discussed along with advantages of long distance control without coding and disadvantages of requiring a camera and incurring call charges.
You will know how to use the LTE 4G FDD GPS tracker TK419
TK419 is often used to track vehicles, motorcycles or boats,and It is a useful tool for fleet management. The users can also cut off fuel/ignition remotely and check historical routes and other vehicle data. The TK419 has excellent stability.
TK419 can be used for locating, tracking and monitoring any remote target through SMS, PC Computer or Mobile APP.
o Positioning and Tracking Cars by SMS
o Emergency Alarm, Power Off Alarm
o Movement Alert, Over Speed Alert
o Geo-fence to restrict the car move within a district.
o Restart the vehicle by SMS.
This document provides installation and operation instructions for the Defender Series IM3 lift truck impact monitoring system. It describes how to install the unit, set up impact thresholds, program authorized operator IDs for vehicle access control, and operate the system. The system includes an indicator unit that displays impact levels and time/date, along with accessories like wiring harnesses and data loggers. Only qualified technicians should perform installations following accepted safety practices.
This document proposes a smart security system for automobiles using Internet of Things (IoT) technology. The system would secure vehicles by detecting unauthorized activity using sensors like an ignition sensor. It could be controlled remotely via a smartphone app, allowing users to lock their vehicle or track its location using GPS. The system would use technologies like Arduino, PIC microcontrollers, GSM boards, and sensors for temperature, humidity, IR, cameras, magnets and motion. Data captured from IoT sensors could be analyzed on platforms like IBM Bluemix using Hadoop for distributed processing. This smart security system offers advantages like low cost, compatibility with existing tech, applicability even in remote areas, and enhanced security for vehicles.
Motorola MotoTRBO Handheld Control Head (HCH) PLMN7131 Basic Service Manual (...TwoWayDigitalRadio.com
The document provides information about MOTOTRBOTM professional digital two-way radios and their handheld control heads. It covers maintenance procedures for the control heads down to the board replacement level. It includes disassembly and reassembly instructions, exploded views, parts lists, and basic troubleshooting steps. Safety notices are provided regarding RF energy exposure compliance and handling of CMOS and LDMOS devices during repair work.
This document provides instructions for setting up and using a NEO CoolCam motion sensor that communicates using the Z-Wave wireless protocol. It includes steps for inserting batteries, including the sensor in a Z-Wave network, configuration parameters to customize sensor settings, and technical specifications. The sensor detects motion and sends notifications to associated Z-Wave devices.
The document describes the design of an advanced car security system using RFID, GSM, and an Arduino board. The system is intended to prevent car theft by only allowing an authorized RFID card to start the car. If an unauthorized card is used, the system will send a call to the owner's phone using GSM and stop the car once the owner responds. The document outlines the components, design, block diagram, and results of testing the system. It concludes that the system enhances car security while allowing for authorized access.
The document describes a vehicle security system project created by students. The system uses GPS and GSM modules to track vehicle location and block the fuel tank and steering via mobile application if an unauthorized person tries to use the vehicle. It was created to address vehicle theft. The project involved research on components, developing prototypes, and creating class, use case, and sequence diagrams to design the system and mobile application. The goal was to allow vehicle owners to monitor and control their vehicle remotely via a mobile app.
MGT90 magnetic GPS Tracking System for cars is an intelligent vehicle tracking and security system used in business traffic, logistics distribution, automobile lease, intelligent transportation, and many other applications.
This document describes a DTMF controlled robot that can be operated without a microcontroller. The robot uses two mobile phones, where one phone calls the other phone attached to the robot. When buttons are pressed on the calling phone, DTMF tones are generated and received by the robot phone. A DTMF decoder chip processes the tones and sends signals to a motor driver chip to control two motors on the robot chassis. This allows the robot to be remotely controlled over a phone network from long distances without requiring complex coding or a microcontroller.
The document provides answers to frequently asked questions about GPS trackers. It covers questions about SIM cards, registration, location tracking via SMS and online, and recommended upload commands. Key points addressed include:
- Recommending M2M SIM cards for lower cost without voice functions. GPRS and caller ID must be enabled.
- Troubleshooting a flashing green light by checking the SIM and signal strength.
- Verifying the SIM works by calling the device number or checking SMS replies.
- The importance of setting the correct APN for data uploads and the format for commands.
- Reasons a device may reply with LBS not GPS locations and steps to improve GPS reception.
- How to view real
The document is a user manual for the FLIR LS-X/R thermal monocular. It provides instructions on charging the device, operating controls like power, brightness and zoom functions, and maintaining the device. The manual also outlines different color palettes, auto power off settings, and compliance information.
This document describes the components and applications of a mobile controlled robotic car. The key components are an ATmega 16 microcontroller, chassis, mobile phone, batteries, DTMF decoder module, DC gear motor, wheels, and IR proximity sensor. The microcontroller controls the car and detects obstacles using the IR sensor. The DTMF decoder receives control signals from a mobile phone via DTMF tones. Potential applications mentioned include spying, edge/obstacle avoidance, path following, cleaning, monitoring, search and rescue, and hazardous environments work.
The peer-reviewed International Journal of Engineering Inventions (IJEI) is started with a mission to encourage contribution to research in Science and Technology. Encourage and motivate researchers in challenging areas of Sciences and Technology.
This document provides a synopsis for a project titled "Cell Phone Operated Land Rover". The project aims to control a land rover using a mobile phone. A mobile phone would be connected to a microcontroller and DTMF decoder onboard the rover. When buttons are pressed on the calling phone, DTMF tones are generated and received by the rover, decoded into instructions for the microcontroller to drive motors accordingly. The synopsis outlines the motivation, objectives, methodology, expected timeline and potential impact of using mobile phone control for remote vehicles in academics and industry.
DTMF Controlled Robot Car WITHOUT using MICROCONTROLLERVishwanath Neha
This document describes a DTMF controlled robot project created by a team of students under the guidance of O.SRIKANTH. The robot uses two mobile phones, where one phone calls the other phone mounted on the robot to control it through DTMF tones. When buttons are pressed on the calling phone, corresponding tones are received by the robot phone and processed by a DTMF decoder chip to operate motors via a motor driver chip. Potential applications are discussed along with advantages of long distance control without coding and disadvantages of requiring a camera and incurring call charges.
You will know how to use the LTE 4G FDD GPS tracker TK419
TK419 is often used to track vehicles, motorcycles or boats,and It is a useful tool for fleet management. The users can also cut off fuel/ignition remotely and check historical routes and other vehicle data. The TK419 has excellent stability.
TK419 can be used for locating, tracking and monitoring any remote target through SMS, PC Computer or Mobile APP.
GPS Tracker Mini Auto OBD Car GSM Vehicle Tracking Device Small Plug Play GPS...Horace Huang
1. The document provides an operation manual for the GM07NW OBD Intelligence Position Terminal. It introduces the product, lists accessories, and provides instructions for installation, functions, and technical specifications.
2. Key functions of the GM07NW include anti-theft, remote listening, alarm, tracking and positioning using OBD2, GSM, and GPS modules. It can be used for vehicle rental, fleet management, and dispatch systems.
3. The appendix provides after-sales service and guarantee information, noting a one-year warranty but exclusions for improper use, accidents, or natural disasters.
This document provides information about a GM03CW car GPS tracker, including:
1. An overview of the product components, interfaces, and indicator light meanings.
2. Specifications and functions of the tracker, such as location accuracy, communication methods, and battery life. It also describes functions like time tracking, speed alarms, and low power modes.
3. Instructions for installation, setup via SMS, and common troubleshooting issues like poor signal location.
4. Customer support information like warranty details and after sales service contact options.
1) The document is a user manual for Shenzhen Diwei Machinery Co., Ltd.'s TK116 GPS vehicle tracking terminal.
2) It provides instructions on installing, using, and troubleshooting the terminal, which supports vehicle positioning and tracking via GPS, GSM, and GPRS networks.
3) The manual covers technical specifications, installation steps, wiring diagrams, setting up the terminal, terminal functions like positioning inquiries, fuel cutoff controls, and more.
This document is a user manual for a long-life GPS tracker. It describes the tracker's features such as long battery life, magnetic installation, dual GPS/LBS positioning, and setting/tracking via web, app, or SMS. It provides instructions on installation, including inserting the SIM card and installing the tracker. It also covers status indicators, setting/inquiry methods, troubleshooting, and warranty information.
This document is a user manual for King Pigeon's GSM SMS Controller alarm systems. It describes the features and functions of the S130, S140, and S150 models, which allow users to remotely monitor and control equipment via SMS text messages. The manual provides setup instructions, a list of SMS commands, and specifications for the alarm systems. It also contains safety guidelines and describes the various inputs, outputs, and components of the controller units.
(www.i2rlabs.co.in) We, "I2R Labs," established in the year 2009, are a growing organization and have attained a strong foothold over the market in a short span, we are a single stop provider of hardware and software solutions for the embedded systems market as well as for application software development, We are manufacturers and exporters, retailer, wholesaler, distributor of products such as GPS Modules, GSM GPRS modules, GSM GPRS modem, GSM GPRS gateway, industrial RF modules, 2.4 GHz RF Modules, remote switching system, intelligent brake lights, IO data acquisition system, vehicle and personal tracking solutions, telemetry solutions,Automatic Meter reading, GSM Home automation, GSM pump Controller, GSM generator monitor, GSM gate controller etc. These are widely used in Electronics,Telecommunication and embedded systems market and these conform to the international standards.
Shenzhen Eelink Communication Technology Co. Ltd., launches a new product, TK119 waterproof GPS vehicle tracker to position, monitor and control the vehicle on the position server through GPRS, GPS, GLONASS and internet.
The AD830 alarm control panel uses GSM and telephone lines for alarm communication. Users can select either GSM or telephone line priority. The panel checks GSM signal strength and allows remote arming, disarming, and status checks via calls or SMS messages to the panel's GSM number. RFID cards can be programmed to send SMS messages when swiped. The panel can also make outgoing calls. Proper power is required for the GSM module to function correctly.
User Manual of Mini GPS Tracker FA81 (Huatenglobal), Support OEM/ODMHuaten Global
Huatenglobal technology FA81 Mini GPS trackers are compact, portable devices equipped with GPS (Global Positioning System) technology that allows you to accurately determine the location of the tracker in real-time. These devices have become increasingly popular for a variety of tracking purposes
IRJET- Vehicle Theft Information and Tracking using IoTIRJET Journal
This document describes a vehicle theft information and tracking system using IoT. The system uses a fingerprint scanner to identify the owner and only allows ignition if the correct fingerprint is scanned. It also uses a GPS module to continuously track the vehicle's location. When a request is sent by the owner via SMS, the system responds with the vehicle's current position. The location data is sent via GSM modem. This provides real-time vehicle identity, location, and security information to prevent theft.
This document provides instructions and specifications for a Z-Wave door sensor. The sensor uses a CR2 battery and can be included in a Z-Wave network by pressing the button three times within 1.5 seconds. The sensor detects when a door is opened or closed and supports notification reports to associated devices. It has a battery life of approximately one year.
The document provides safety instructions and operating guidelines for a multifunction printer, including how to power on the device, load paper, and clear jams. It also outlines basic fax functions like transmission modes, setting originals, and dialing, as well as how to register settings like quick dials and groups.
This document provides a user manual for a mobile phone. It includes sections on safety, getting started, using phone features, settings, applications and technical specifications. The getting started section covers installing SIM/battery/memory cards and charging the battery. Phone features include making/answering calls, call history and settings. Settings cover profiles, display, lock screen and more. Applications include contacts, messaging, internet, multimedia, calendar and more.
This product is with GPS module and GSM module, that has many new and unique functions, such as super power saving technology, LBS locate technology (without GPS signal), real time uploading current location to server (user can control working mode), check current location bu SMS or app on mobile phone or website etc. It contains high capacity rechargeable polymer battery (900mAH), standby time can reach 12 days (working mode 1, report mode 0). User can control different working mode for different using (real time mode or standby mode) , it can work without platform, just send SMS to check current location, also it can upload location to sever by user setting time interval, and user can check current location & playback history tracking on mobile app or PC web visiting. This GPS tracker is mini size, and easy to use, it is suit for kids, old parents, pets and outdoor workers tracking.
This document provides instructions for installing and removing the SIM card, battery, and storage card from a mobile phone. Key steps include:
1) Removing the back cover to access the SIM card, battery, and storage card slots.
2) Inserting the SIM card with the gold contacts facing down.
3) Removing the battery by lifting it from the notch at the bottom.
4) Inserting an optional memory card for additional storage.
5) Replacing the back cover once the SIM card, battery, and storage card are installed.
IRJET- Data Acquisition and Remote Monitoring DisplayIRJET Journal
This document describes a system for remotely monitoring industrial sensors and devices. It uses two radar sensors to measure tank levels, temperature, and fill percentage. A remote monitoring device collects data from the sensors via wireless network and displays it on a dashboard. The remote monitoring device can operate on battery or external power. It connects industrial sensors and transmits their data via cellular network to cloud servers, allowing the sensor data to be monitored remotely from any location.
Similar to Luggage Tracker - Travel Tension Free! (20)
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Luggage Tracker - Travel Tension Free!
1. V1.0
1 2 3
5 6 7
Operation Manual
AT15 Long Standby Position Terminal
II. Appearance of product
2.1 Functional parameter
Front cover anti-dismantlement button top
III. Convenient installation
3.1 Open the front cover of the equipment and insert SIM into the card slot
in a correct way; open the switch of buttery and install the front cover.
3.2 Observe the indicator light of equipment, the state of that light is
described as follows:
The state of indicator light of equipment
Indicator light of
GSM (blue)
Indicator light of
GPS (green)
Keep the light on:normal external electricity,
network searching
Light off: equipment enters standby model
Light on: searching the signal of satellite position
Slowly flash: satellite has been positioned
Flash every three seconds: normal external and
normal network
When data is transmitting,
the light flashes three
times per 200 seconds.
When the green light turns from lighting to slow flashing, it means the work
of satellite position is normal. The blue light turns from lighting to flashing
per 3 seconds, which represents the operation of GSM is normal.
Statement:
This instruction content is being under a copy held by our company.
Any update of this instruction content and product specification will not be in prior
notice. This company reserves the right to change the specification and material
been included without notice. And our company will no be responsible for any
damage due to beliving material referring to(including consequential damage),
including but not limited to mistprint and other errors related to this publication.
If there is any update of the software, it sujects to instruction documentation of
latest software version.
Technology Support:
Thanks for purchasing equipment from our company. Acquire relative support
from service provider if finding any problem in product operation.
Precautions for Use:
● It need a SIM traffic card, to using the GPRS network to connect the cloud
platform, while the GPRS service is provided by operators; It is suggested to
use SIM traffic card with voice and short message function, if needing short
message or calling alarm, consulting the details from related operators; Please
check the balance of phone call to ensure the normal using of data
service,consulting the details from local distributors.
● It need to set the guardian number before achieving all the function; It only
receive platfrom instruction before setting.
● Avoid approaching to other interference source, such as automobile data
recorder,interphone and other vehicle communication terminal.
● Wireless remote control can only be emergency use when the wireless burglar
alarm is out of control.
● It should be operated by professional personnel when change circuit of vehicle
and other under-control equipments. Our company will take no responsibility if
the damage of products and other property are caused by false operation.
● There is no internal repair parts in the equipment, please do not take it apart
without authorization. Please send back to our company or appointed
maintenence station.
● Please ask the service provider for the login method, download and install the
mobile phone terminal APP.
Announcements:
● Please swith off the equipment when entering in wireless device forbidden
area(such as airplane, medical site marked non-mobilephone using, gas
station or oil depot, military control area and areas wire wireless launch
device forbidden definitely).
● Please do no throw this product in fire or water, avoid explosion or
environment pollution.
Please keep products dry.
I. Functional Specification
1.1 Product functions
Location and tracking, anti-screened alarm, zero-voltage alarm, low-voltage
alarm, vibration alarm, movement alarm, over-speed alarm, electric fence and
trace replay.
1.2 The field of application:
It is especially applied to control the operation state of target and such fields as
vehicle lease and mortgage guarantee.
Antiskid gasket
Magnet
Light sensor
USB port
GPS Indicator(Green)
Power Indicator(Red)
GSM Indicator(Blue)
SIM Card slot
Indicator light of
Power (red)
Light on: searching the signal of satellite position
Slowly flash:Charging
Light on: Full charging
VI. Working model
4.1 Standby model
It is the default that the position information will be uploaded at 9:00
everyday.It is the default that the position information will be uploaded
at 9:00 everyday.The time and frequency of upload can be adjusted
automatically. It can be setas several times per day (1-48 times per
day) and many days per time (2-7 days per time).
4.2 Tracking model
When the equipment is running, the position information will be
uploadedevery 30 seconds. When it is static, the heartbeat data will be
transmittedevery 3 minutes.
4.3 Model transformation
When there is an anti-dismantlement and light sensation alarm,
equipment willreport the situation to the platform and then turn into the
tracking model. Underthe situation that equipment do not receive the
order to release alarm, it will be continuous to track in 60 seconds and
then recover the standby model automatically.
4
2. 1
sos,xxxxxx
xxxxx
2 C
3 Mode,0/1
4 ITV
10
15
11
12 13 14
Type of
alarm
Text main
switch
Switch of
Platform alarm
Switch of
text alarm
Switch of
phone alarm
Phone
main switch
Anti-dismantlement
Light sensation
Fence Support
Off Off
Off
Off
Off
Off
Off
Off
Off Off
No. Name of order Form of order Instruction
Text C to send to the SIM card, namely the information of
current location that can be received by equipment.
Text Mode, 0 or Mode, 1T to send to the SIM card of
equipment, namely the real model transformation. 0 means
standby model and 1 means tracking model.
Text ITV, 30 to send to the SIM card of equipment, which
means the modification frequency of rotation time is 30
seconds and the effective range is 10-3600 seconds.
Text “SOS xxxxxxxxxx to send to the SIM card of equipment,
namely the guardian number. xxxxxxxxxx means the
guardian number that needs to be set. If this number is
unavailable, it means guardian numbers need to be cleaned.
Product Guarantee Card
User Name
Contact Add.
Contact Number
Sales Person Name
Purchase Date
Local Sales Unit
Guarantee Date
Product Model
Product Serial Number
Local Sales Phone Number
Guarantee Content
(Stamp)
Purchase Site
message function will shorten the monthly payment duration of traffic card. All
the setting and function of this product can be operated by mobile phone APP,
WEB and other methods,it is suggested to purchase in priority.
● False Login when log in the system, appearring non-existence of this IMEI No.
or client account.Please contact the customer service and add this IMEI
account into the system.
Appendix II After-sale Service and Guarantee Lists
● The customers can choose refunding, changing or after-sale service if it appears
performance failure in this product within seven days purchasing the products.
● The customers will receive free guarantee service if it appears non-factitious
damage false within one year purchasing the products.
● The guarantee card shall be provide when need guarantee service. Our
company have the rights to handle as no guarantee, if this card can not be
provided or this card is altered privately.
● It will void guarantee if it is included in the circumstance below. And the
maintenance can be provided by our company, charging the cost price of spare
parts.
1.Equipment damage due to human factor.
4.4 Alarm switch There are three approaches to give an alarm,
including sending messages,calling the phone and landing platform.
Each type will support one kind orvarious kinds approaches.
Note: Factory default is the low-consumption model. If users need apply
theanti-dismantlement alarm and light sensitive alarm, they can
open it by platform, APP or text order.
4.5 Order set of text
V. Platform landing
5.1 Landing position service platform
Please land the spot of service platform designated by dealer to
conductrelevant settings and functional operation.
5.2 APP logining
Please login the website designated by dealer to upload client application
toinstall ios and Android.
Appendix I Fault and Elimination
Equipment Non-online
1.Inspecting the equipment signal light, it shows general server connection when
blue GSM signal light flashes once each 3 seconds; It shows SIM card loose
or poor contact when this light keep long bright, and it can be tried to shutdown
and install the SIM card again.
2.Please try to dial SIM card number if the SIM card possesses phone call
function. And it will be hung up automatically in general; It can be tried to
shutdown and install the SIM card again when it prompts power off or “can not
be connected for the moment”.
3.Please contact the technical personnel to assist disposing and rework, if both t
he blue signal light and phone call function are normal and the equipment still
be non-online.
Can not Location after Equipment Online
1.Inspecting the equipment signal light after equipment power on, it shows
successful location if the blue GPS signal light flashes once each 3 seconds; it
shows non-location if this light keep long bright, in this time, please confirm
whether GPS/beidou ceramic side is upward, whether there are metal objects
surrounding the equipmen
2.Please restrat the equipment, and set it on open ourdoor ground, supplying
power by built-in battery and Check if it can locate successfully, when
installtion and location of equipment are all correct.
3.Please contact the techinical personnel to assist disposing and rework, if it still
can not locate in open outdoor ground.
Equipment Off-line when Operation
1.Confirm if the SIM card is in arrearage at first;
2.Please try to dial SIM card number if the SIM card possesses phone call
function. And it will be hung up automatically in general, in this time, it can be
sent short message(at+wpar=reset) to the equipment for restarting; if it still can
not be on-line after restart, please check the equipment and restart manually.
3.There is possibility that the vehicle is located in underground garage and other
place with poor siginal, if the dialed phone prompts power off or “can not be
connected for the moment”. When the vehicle comes out from the underground
garage, the equipment will recover network and be on-line automatically;
Please check the equipment and restart manually if it is confirmed that the
surrounding situation is well and there is driving during off-line.surrounding
situation is well and there is driving during off-line.
4.Please contact the techinical personnel to assist disposing and rework, if it still
can not be on-line after restart the equipment manually.
The Accuracy of Satellite Location is not enough.
1.Please confirm the equipment is in on open outdoor ground or there is no metal
cover on the installation place of BDS/GPS antenna.
2.The accuracy of satellite location is about 10 m, accuracy is not enough
because the equipment has been transferred in indoors. It will be changed to
base station location in indoors, due to the double models of location including
BDS/GPS and base station. The accuracy of base station varies from 50m to
hundreds of meters according to the base station density in its environment.
The base station location can be closed on the platform.
● The purchased monthly
payment traffic card arrears before the appointed date.Charge of short
message and phone call will not be calculted in general by the monthly
payment traffic card, only providing monthly payment data traffic. Using short
2.Product damage due to false wiring.
3.Equipment damage due to non-compliance with this Operation Insutruction.
4.Equipment damage due to force majeure including natural disasters, lightning
stroke and etc.
Please keep this guarantee card properly for our better service.
5 TIME
6
7
8 Fcbj,1,1,1
Jgbj1,1,19
Text time, 0800,2 to send to the SIM card, which means
standby model will be reported two times during 8:00 am. to
8:00 pm. And the time range is 0000-2359, which shows as
00:00-23:59 and the number range is 1-48.
Fcbj, n1, n2, n3 are platform switch, n2 is text switch and n3
is phone switch. 1 means starting and 0 means ending.
Jcbj, n1, n2, n3 are platform switch, n2 is text switch and n3
is phone switch. 1 means starting and 0 means ending.
Light sensor
alarm
Anti
dismantling
alarm
apn: local telecom provider apn code.
The platform server IP address and port number.
APN,apn
IP1,IP
address,port
Super Admin Command:Add 'at+wpar='to the command to config the
device without setting SOS number.
8 9