Here are the steps to configure the basic settings:
1. Click "Read setting" to load the existing settings before making any changes.
2. Check or uncheck "Arm automatically when power on" based on your preference.
3. Check or uncheck "Add timestamp to alarm SMS" based on your preference.
4. Check or uncheck "Press * or # to stop Dial" based on your preference and device model.
5. Enter a number between 0-65535 for "Device ID". This is optional for identification.
6. Enter a description for "Device description", such as the installation location.
7. Click "Write setting" to save the basic settings to
Referred Website: http://www.four-faith.hk
F2920D Multiple Connection Terminal is a high-performance measuring and monitoring equipment, which integrates analog signal acquisition, switch input, relay output, RS485 communication, LoRa, WIFI, 433MHz, ZigBee, and cellular wireless communication. It can access different equipments and realize the monitoring and control function of the equipment through different communication modes.
The hAP lite is a simple home wireless access point that can be powered via USB and has four Ethernet ports. It is configured out of the box to allow wireless internet access. The document provides instructions on connecting the device, accessing it for configuration via a web browser at its default IP of 192.168.88.1, and recommends setting a wireless password for security. Power and reset button functions are also outlined.
The H700 series cellular router:
- Provides 2G/3G/4G cellular connectivity and enables sharing of a cellular internet connection via WiFi.
- Has dual SIM card slots for redundancy and backup.
- Includes 4 LAN ports and supports additional optional features like WiFi, GPS, serial ports, video server, and internal battery.
- Is suited for applications like remote monitoring, security, utilities metering, POS terminals, traffic control, and more.
The document describes a battery monitoring system that provides:
- 24/7 online monitoring of battery voltage, current, temperature, and other metrics.
- Real-time alarming when battery data is abnormal.
- Online balancing to equalize battery voltages.
It then discusses different battery monitoring solutions for various applications like data centers, telecom sites, energy storage, and substations.
The document describes Siretta industrial routers, which are designed for use in industrial environments and provide reliable cellular connectivity. It discusses various Siretta router models including the Quartz, Mica, Mica Compact, and Zircon, outlining their specifications, features, and applications. Examples of how Siretta routers can be used in CCTV security systems and traffic management are also provided.
This document is the user's manual for Sepam Series 20 protective relays. It provides instructions on the metering functions, protection functions, control and monitoring functions, and Modbus communication of the Sepam Series 20 relays. The manual contains sections on introduction, metering functions, protection functions, control and monitoring functions, Modbus communication, installation, and use of the relays.
Referred Website: http://www.four-faith.hk
F2920D Multiple Connection Terminal is a high-performance measuring and monitoring equipment, which integrates analog signal acquisition, switch input, relay output, RS485 communication, LoRa, WIFI, 433MHz, ZigBee, and cellular wireless communication. It can access different equipments and realize the monitoring and control function of the equipment through different communication modes.
The hAP lite is a simple home wireless access point that can be powered via USB and has four Ethernet ports. It is configured out of the box to allow wireless internet access. The document provides instructions on connecting the device, accessing it for configuration via a web browser at its default IP of 192.168.88.1, and recommends setting a wireless password for security. Power and reset button functions are also outlined.
The H700 series cellular router:
- Provides 2G/3G/4G cellular connectivity and enables sharing of a cellular internet connection via WiFi.
- Has dual SIM card slots for redundancy and backup.
- Includes 4 LAN ports and supports additional optional features like WiFi, GPS, serial ports, video server, and internal battery.
- Is suited for applications like remote monitoring, security, utilities metering, POS terminals, traffic control, and more.
The document describes a battery monitoring system that provides:
- 24/7 online monitoring of battery voltage, current, temperature, and other metrics.
- Real-time alarming when battery data is abnormal.
- Online balancing to equalize battery voltages.
It then discusses different battery monitoring solutions for various applications like data centers, telecom sites, energy storage, and substations.
The document describes Siretta industrial routers, which are designed for use in industrial environments and provide reliable cellular connectivity. It discusses various Siretta router models including the Quartz, Mica, Mica Compact, and Zircon, outlining their specifications, features, and applications. Examples of how Siretta routers can be used in CCTV security systems and traffic management are also provided.
This document is the user's manual for Sepam Series 20 protective relays. It provides instructions on the metering functions, protection functions, control and monitoring functions, and Modbus communication of the Sepam Series 20 relays. The manual contains sections on introduction, metering functions, protection functions, control and monitoring functions, Modbus communication, installation, and use of the relays.
This document describes a motor control reference kit from Renesas Electronics that uses sensorless vector control to drive 3-phase brushless motors. The kit includes hardware with an RX23T microcontroller and inverter, as well as embedded software. It supports permanent magnet synchronous and brushless DC motors with options for sensorless or sensed control. The kit provides scalable power stages up to 300V/20A or 60V/100A. The embedded software implements a full vector control algorithm and auto-tuning to automatically identify motor parameters and calibrate PI coefficients. Schematics, bills of materials, manuals and source code are included to allow developers to prototype sensorless motor control applications.
The document provides instructions for setting up a RouterBOARD hAP wireless access point. It explains that the device is configured out of the box to operate as a wireless access point, and recommends setting a wireless password for security. Setup instructions include connecting an internet cable to port 1, local network devices to ports 2-5, and accessing the device's web interface at 192.168.88.1 to configure the wireless password and other settings. The document also provides information on powering the device, resetting it, and warranty terms.
The BL-R8723RB1 is a Bluetooth and wireless N USB module that supports various wireless protocols and standards. It has a USB 2.0 interface and operates in the 2.4-2.4835GHz frequency range across 11 channels. The module supports data rates up to 90Mbps and has a transmission distance of up to 100 meters indoors and 300 meters outdoors. It is compatible with various operating systems and has small dimensions of 19.5*12.4*1.8mm.
This document defines the technical requirements for mobile terminals to be used on public mobile networks using technologies like GSM, GPRS, WCDMA, CDMA. It specifies requirements around identification, keypad standards, safety, health, operating frequencies, conformity assessment, and support for features like SMS in regional languages and emergency services. Mobile terminals must meet the appropriate standards for their technologies to ensure compatibility and manage issues like electromagnetic emissions and specific absorption rate.
Multi-purpose Manager (MPM) devices enable wired and wireless control of HVAC, lighting, and metering applications. They provide integrated control solutions for entire sites or zones within large buildings via a web-based building management system. Key features include 6 universal inputs, 6 outputs, wireless support for EnOcean and ZigBee devices, Ethernet connectivity, and remote access and programming through StruxureWare Building Expert software.
The H720 series cellular router enables users to create a secure Wi-Fi network and share a cellular internet connection. It has two SIM card slots to allow two SIMs to work together for backup. Additional optional features include WiFi, GPS, serial ports, video server, and internal battery. The router supports 2G, 3G, 4G and CDMA networks. It is used in applications such as remote monitoring, surveillance, meter reading, and traffic control.
Home Automation Control System using SMSIRJET Journal
This document describes a home automation control system using SMS. The system allows users to remotely control home appliances like lights and fans by sending SMS commands to a microcontroller system from their mobile phone. The system uses an AT89S51 microcontroller, GSM modem for SMS connectivity, relay driver IC to control appliances, and other components. It receives SMS commands and uses the microcontroller to generate control signals to operate devices. The goal is to provide low-cost, universal remote access to automate home appliances via SMS from any location with mobile network access.
This document provides a quick guide for installing and programming the VLT Micro Drive FC 51 frequency converter. It contains information on safety warnings and instructions, an introduction to available documentation and approvals, and sections covering installation, programming, specifications, options, and other technical details. The guide includes mechanical dimensions, electrical installation guidelines, terminal torque requirements, fuse recommendations, and derating information for ambient temperature, air pressure, and low speeds.
This page shows the
current status of the robot and allows
sending basic commands like Clean,
Dock and Spot.
User’s Remote: This page allows
sending more advanced commands
like:
- Change robot mode (Safe, Passive,
Full)
- Control motors
- Send virtual walls
- Check battery status
- Check firmware version
Driver’s Remote: This page allows
sending low level commands directly
to the robot like:
- Direct motor control
- LED control
- Buzzer control
- Sensors values
- Firmware update
Setup Wi-Fi Configuration: This
page allows configuring the Wi-Fi
parameters to connect RooWifi to
Xexun gps vehicle tracker xt009 user manualxxgpstraker
The document provides instructions for setting up and using an XT-009 GPS vehicle tracker. It includes details on hardware components, installation, functions like geo-fencing, speed alerts, and more. The tracker can be used to monitor vehicles, track assets, and ensure safety of people. It supports features such as motion detection, ignition alerts, and sending emergency alerts with the press of a button.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
This document is a user manual for a long-life GPS tracker. It describes the tracker's features such as long battery life, magnetic installation, dual GPS/LBS positioning, and setting/tracking via web, app, or SMS. It provides instructions on installation, including inserting the SIM card and installing the tracker. It also covers status indicators, setting/inquiry methods, troubleshooting, and warranty information.
The document provides information on 4G routers, including:
1) 4G routers are industrial IoT routers that are compatible with 4G/3.5G/3G/2.5G networks and provide high-speed, stable wireless transmission.
2) They have interfaces that allow connection to serial, Ethernet, and WiFi devices for transparent data transmission and routing.
3) Potential applications of 4G routers include intelligent transportation, vehicle monitoring, security monitoring, industrial monitoring, financial services, power, environmental protection, water conservancy, and other industries.
This document provides an overview of the features and capabilities of Motorola's MOTOTRBOTM digital two-way radio system. It describes the digital radio technology used, including analog to digital conversion, voice coding, framing, and TDMA transmission. It also outlines the basic system topologies for both digital and analog operations, including repeater modes, mixed modes, and capacity plus modes. Finally, it provides details on the key digital features supported, such as digital voice calls, emergency functions, signaling features, and data services.
Fast evaluation, demonstration and development for Your microcontroller based sensor or detector design!
Quickly evaluate, demonstrateand develop intelligent sensor designs with Detect it! Built on a True Low Power RL78 MCU with fast wake-up and dedicated analog features, it includes 4 different sensor boards and full reference source code.
You will know how to use the LTE 4G FDD GPS tracker TK419
TK419 is often used to track vehicles, motorcycles or boats,and It is a useful tool for fleet management. The users can also cut off fuel/ignition remotely and check historical routes and other vehicle data. The TK419 has excellent stability.
TK419 can be used for locating, tracking and monitoring any remote target through SMS, PC Computer or Mobile APP.
GSM GPRS sim900 a modem with aurdino compatibleRaghav Shetty
This is a very low cost and simple Arduino GSM and GPRS shield. We use the module SIMCom SIM900A.
The Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions to start controlling your world through the internet. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages
This document is a user manual for King Pigeon's GSM SMS Controller alarm systems. It describes the features and functions of the S130, S140, and S150 models, which allow users to remotely monitor and control equipment via SMS text messages. The manual provides setup instructions, a list of SMS commands, and specifications for the alarm systems. It also contains safety guidelines and describes the various inputs, outputs, and components of the controller units.
This document describes a motor control reference kit from Renesas Electronics that uses sensorless vector control to drive 3-phase brushless motors. The kit includes hardware with an RX23T microcontroller and inverter, as well as embedded software. It supports permanent magnet synchronous and brushless DC motors with options for sensorless or sensed control. The kit provides scalable power stages up to 300V/20A or 60V/100A. The embedded software implements a full vector control algorithm and auto-tuning to automatically identify motor parameters and calibrate PI coefficients. Schematics, bills of materials, manuals and source code are included to allow developers to prototype sensorless motor control applications.
The document provides instructions for setting up a RouterBOARD hAP wireless access point. It explains that the device is configured out of the box to operate as a wireless access point, and recommends setting a wireless password for security. Setup instructions include connecting an internet cable to port 1, local network devices to ports 2-5, and accessing the device's web interface at 192.168.88.1 to configure the wireless password and other settings. The document also provides information on powering the device, resetting it, and warranty terms.
The BL-R8723RB1 is a Bluetooth and wireless N USB module that supports various wireless protocols and standards. It has a USB 2.0 interface and operates in the 2.4-2.4835GHz frequency range across 11 channels. The module supports data rates up to 90Mbps and has a transmission distance of up to 100 meters indoors and 300 meters outdoors. It is compatible with various operating systems and has small dimensions of 19.5*12.4*1.8mm.
This document defines the technical requirements for mobile terminals to be used on public mobile networks using technologies like GSM, GPRS, WCDMA, CDMA. It specifies requirements around identification, keypad standards, safety, health, operating frequencies, conformity assessment, and support for features like SMS in regional languages and emergency services. Mobile terminals must meet the appropriate standards for their technologies to ensure compatibility and manage issues like electromagnetic emissions and specific absorption rate.
Multi-purpose Manager (MPM) devices enable wired and wireless control of HVAC, lighting, and metering applications. They provide integrated control solutions for entire sites or zones within large buildings via a web-based building management system. Key features include 6 universal inputs, 6 outputs, wireless support for EnOcean and ZigBee devices, Ethernet connectivity, and remote access and programming through StruxureWare Building Expert software.
The H720 series cellular router enables users to create a secure Wi-Fi network and share a cellular internet connection. It has two SIM card slots to allow two SIMs to work together for backup. Additional optional features include WiFi, GPS, serial ports, video server, and internal battery. The router supports 2G, 3G, 4G and CDMA networks. It is used in applications such as remote monitoring, surveillance, meter reading, and traffic control.
Home Automation Control System using SMSIRJET Journal
This document describes a home automation control system using SMS. The system allows users to remotely control home appliances like lights and fans by sending SMS commands to a microcontroller system from their mobile phone. The system uses an AT89S51 microcontroller, GSM modem for SMS connectivity, relay driver IC to control appliances, and other components. It receives SMS commands and uses the microcontroller to generate control signals to operate devices. The goal is to provide low-cost, universal remote access to automate home appliances via SMS from any location with mobile network access.
This document provides a quick guide for installing and programming the VLT Micro Drive FC 51 frequency converter. It contains information on safety warnings and instructions, an introduction to available documentation and approvals, and sections covering installation, programming, specifications, options, and other technical details. The guide includes mechanical dimensions, electrical installation guidelines, terminal torque requirements, fuse recommendations, and derating information for ambient temperature, air pressure, and low speeds.
This page shows the
current status of the robot and allows
sending basic commands like Clean,
Dock and Spot.
User’s Remote: This page allows
sending more advanced commands
like:
- Change robot mode (Safe, Passive,
Full)
- Control motors
- Send virtual walls
- Check battery status
- Check firmware version
Driver’s Remote: This page allows
sending low level commands directly
to the robot like:
- Direct motor control
- LED control
- Buzzer control
- Sensors values
- Firmware update
Setup Wi-Fi Configuration: This
page allows configuring the Wi-Fi
parameters to connect RooWifi to
Xexun gps vehicle tracker xt009 user manualxxgpstraker
The document provides instructions for setting up and using an XT-009 GPS vehicle tracker. It includes details on hardware components, installation, functions like geo-fencing, speed alerts, and more. The tracker can be used to monitor vehicles, track assets, and ensure safety of people. It supports features such as motion detection, ignition alerts, and sending emergency alerts with the press of a button.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
This document is a user manual for a long-life GPS tracker. It describes the tracker's features such as long battery life, magnetic installation, dual GPS/LBS positioning, and setting/tracking via web, app, or SMS. It provides instructions on installation, including inserting the SIM card and installing the tracker. It also covers status indicators, setting/inquiry methods, troubleshooting, and warranty information.
The document provides information on 4G routers, including:
1) 4G routers are industrial IoT routers that are compatible with 4G/3.5G/3G/2.5G networks and provide high-speed, stable wireless transmission.
2) They have interfaces that allow connection to serial, Ethernet, and WiFi devices for transparent data transmission and routing.
3) Potential applications of 4G routers include intelligent transportation, vehicle monitoring, security monitoring, industrial monitoring, financial services, power, environmental protection, water conservancy, and other industries.
This document provides an overview of the features and capabilities of Motorola's MOTOTRBOTM digital two-way radio system. It describes the digital radio technology used, including analog to digital conversion, voice coding, framing, and TDMA transmission. It also outlines the basic system topologies for both digital and analog operations, including repeater modes, mixed modes, and capacity plus modes. Finally, it provides details on the key digital features supported, such as digital voice calls, emergency functions, signaling features, and data services.
Fast evaluation, demonstration and development for Your microcontroller based sensor or detector design!
Quickly evaluate, demonstrateand develop intelligent sensor designs with Detect it! Built on a True Low Power RL78 MCU with fast wake-up and dedicated analog features, it includes 4 different sensor boards and full reference source code.
You will know how to use the LTE 4G FDD GPS tracker TK419
TK419 is often used to track vehicles, motorcycles or boats,and It is a useful tool for fleet management. The users can also cut off fuel/ignition remotely and check historical routes and other vehicle data. The TK419 has excellent stability.
TK419 can be used for locating, tracking and monitoring any remote target through SMS, PC Computer or Mobile APP.
GSM GPRS sim900 a modem with aurdino compatibleRaghav Shetty
This is a very low cost and simple Arduino GSM and GPRS shield. We use the module SIMCom SIM900A.
The Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions to start controlling your world through the internet. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages
This document is a user manual for King Pigeon's GSM SMS Controller alarm systems. It describes the features and functions of the S130, S140, and S150 models, which allow users to remotely monitor and control equipment via SMS text messages. The manual provides setup instructions, a list of SMS commands, and specifications for the alarm systems. It also contains safety guidelines and describes the various inputs, outputs, and components of the controller units.
Caimore wireless 3 g 4g mobile nvr mdvr applied in charge pile(station)Cynthia Wang
Caimore No. 4 generation products supports image recording, image capture forensics, GPS positioning, help service, through the serial bus RS485, RS232, CAN protocol and IP protocol, timing, and power level meter, meter the amount of the charge, provide human-computer interaction, and BMS real-time communication, access to battery type, cell voltage, remaining capacity, temperature, alarms and other information centralized monitoring communication ,report the charging status to realize security wireless intelligent charging pile management application solutions by pictures and data .
This document provides information about configuring and using the SITRANS F MAG 8000 GSM/GPRS automated meter reading system. It discusses setting up the MAG 8000 module through SMS commands to configure the mobile network provider, SMS service center, and email access point name. It also describes testing the voice call functionality and network connection after installation. The training covers steps for basic configuration of the module via SMS, testing commands, and checking email and OPC server data transmission.
This document summarizes the features of the UT01 GPS tracker for vehicle tracking and management. It has a wide operating voltage range of 9-36V, allows for remote engine immobilization and voice monitoring, and provides cost-effective tracking solutions. The UT01 has multiple interfaces for monitoring and control, external antennas for better signal reception, and sends alarms for SOS alerts, vehicle movement, speed, and geo-fencing.
This document describes a GSM-based home automation system that allows users to remotely control and monitor home appliances via SMS after authentication. The proposed system aims to overcome issues with existing manual systems by allowing remote control and scheduling of devices to save time and energy. The system uses a GSM modem connected to a microcontroller to send and receive SMS commands to control relays and devices like lights and fans. It provides advantages like low cost and global access but has delays due to mobile networks. The system could be enhanced with security cameras for remote monitoring.
Enviromax controller is economice telemetry solution for M2M applications. Requires requires supervision and control of data equipment over the 3G network. Browse
www.maxon.com.au for futher details
FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM ...Saikiran perfect
The main aim of this project is to develop a system based on Embedded microcontroller ,which is used for controlling electrical appliances in home or industry and fire detection using GSM.
FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSMSaikiran Perfect
The idea behind this project is to use the existing GSM infrastructure. So, all the operations involve the GSM system also. As we send any SMS, it goes through the GSM system. Any sent SMS can be received if we use a SIM card and GSM module. To operate any GSM modem, we have to use the AT commands to operate them. For example, if any SMS arrives the GSM modem sends the serial data in ASCII format. We can read these data if we connect the modem with the serial port of the microcontroller at the baud rate of 9600. As the microcontroller comes to know that a SMS has been arrived, it can sent a proper AT command to read the SMS. The reading of SMS returns the mobile number of sender, the time and much more information. We have to select the SMS part of the message. The starting string of the SMS is used as the password. As the password is matched, then the SMS arrival is assumed to be valid by the microcontroller otherwise, it ignores the SMS. Working of “FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM” is very simple.
The COM-1288 module combines GPRS connectivity, GPS reception, and I/O capabilities for onboard computing applications. It includes a Siemens GPRS modem, 12-channel GPS receiver, 4 serial ports (2 available to the user), 16 digital I/O lines, and works within a -20/+70°C temperature range. The module is designed for applications like vehicle tracking, telematics, and rail communication systems by providing wireless data connectivity and location services on embedded PC/104 boards.
Technolog Water Utility Data Logger Cello 4SIves Equipment
A remote telemetry outstation delivering a scalable machine to machine (M2M) solution reducing user operating and capital costs.
Multiple site parameters are monitored, recorded and transmitted over 2G (SMS/GPRS) or 3G networks, providing a comprehensive multi-application solution for the Utilities and Industry.
E-Lins Technology provides an analysis of 4G Industrial Routers. They are one of the leading suppliers and manufacturers of 4G Industrial routers across the globe.
A Review on Zigbee, Gsm and Wsn Based Home Security by Using Embedded Control...ijesajournal
Embedded controlled detector network is that the technology needs to implement environmental solutions
effectively. The wireless sensor network is used to control respective devices and monitor environmental
parameters effectively. Wireless sensor network technology is used to monitor environmental parameters
such temperature sound pressure in many applications. Many researchers are developed the wireless
sensor network to implement real time surveillance for many applications. The existing wired systems are
bulky, very high cost and difficult to maintain. The proposed system is user friendly, low cost and
controlled by embedded controlled sensor network. In the proposed system ARM based microcontroller is
used for monitoring and wireless sensors are used to control the various devices.
IRJET-A Comparative Study of use of the Library and the Internet as Sources o...IRJET Journal
This document describes a password protected interactive voice response system to remotely control a three-phase motor using a GSM modem and microcontroller. The system allows a user to call in, enter a password, and then select to turn the motor on or off by pressing buttons on their phone. It uses pre-recorded voice prompts to interact with the user. The system has applications for remotely controlling equipment like motors in agricultural settings from anywhere via a mobile phone call. It aims to provide a low-cost and user-friendly solution for remote control of three-phase motors with voice confirmation of commands.
This document describes a dual SIM 4G wireless router that provides backup and failover capabilities between two SIM cards. It can switch between SIMs if the primary network fails, ensuring continuous network connectivity. It supports various radio technologies including LTE, HSPA+, UMTS, and GSM. The router has an industrial grade design and passes regulatory certifications. It is suitable for outdoor M2M applications requiring high bandwidth and stability.
GSM GPRS sim900 a modem with stub antenna and sma connector-USBRaghav Shetty
GSM/GPRS Modem-RS232 is built with Dual Band GSM/GPRS engine- SIM900A, works on frequencies 900/ 1800 MHz. The Modem is coming with RS232 interface, which allows you connect PC as well as microcontroller with RS232 Chip(MAX232). The baud rate is configurable from 9600-115200 through AT command. The GSM/GPRS Modem is having internal TCP/IP stack to enable you to connect with internet via GPRS. It is suitable for SMS, Voice as well as DATA transfer application in M2M interface. The onboard Regulated Power supply allows you to connect wide range unregulated power supply . Using this modem, you can make audio calls, SMS, Read SMS, attend the incoming calls and internet through simple AT commands
The document provides information about wireless M2M-IoT solutions from MTX-M2M, including Java-enabled M2M modems, Linux platforms, routers, and accessories. MTX-M2M offers a range of modem products powered by Cinterion modules that support 2G, 3G, and 4G cellular networks with features like GPS, WiFi, Bluetooth, and various interfaces. Their Java-enabled modems can run custom applications and connect devices for M2M/IoT scenarios.
MTX M2M catalog 2015 IoT, Internet of ThingsMTX M2M
MTX M2M is M2M IoT, Internet of Things, solution, GSM/GPRS-UMTS/HSPA modems, routers and gateways. MTX M2M radio modem enable machines, devices and vehicles to communicate using 2G, 3G or 4G networks. End applications are remote control, telemetry, MESH network, alarms, security, metering and many others. MTX M2M are intelligent wireless modems as they have Linux or JAVA programming capabilities.
This document describes a mobile phone signal jammer project that uses an ARM 7 TDMI processor-based LPC2148 controller to jam GSM, CDMA, and 3G networks according to a pre-scheduled time duration. The jammer blocks mobile signals through radio wave interference within defined regulated zones, preventing mobile use in places like libraries, hospitals, and schools. It can be programmed using an on-chip real-time clock to automatically activate and deactivate jamming according to a set schedule.
Similar to S264~s266 temperature data logger user manual v2.1 (20)
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...PIMR BHOPAL
Variable frequency drive .A Variable Frequency Drive (VFD) is an electronic device used to control the speed and torque of an electric motor by varying the frequency and voltage of its power supply. VFDs are widely used in industrial applications for motor control, providing significant energy savings and precise motor operation.
Rainfall intensity duration frequency curve statistical analysis and modeling...bijceesjournal
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...PriyankaKilaniya
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Design and optimization of ion propulsion dronebjmsejournal
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
S264~s266 temperature data logger user manual v2.1
1. Inquiry Onsite Temperature &
Humidity with SMS!
High-Low Threshold alarm
with SMS text Message alert!
Interval Report Onsite
temperature & humidity to
Your Mobile Phone by SMS!
S264/S265/S266
User Manual
Ver 2.1
Date Issued: 2018-04-09
King Pigeon Hi-Tech. Co.,
Ltd.
www.GPRS-M2M.com
GSM/SMS/GPRS/3G/4G
Temperature & Humidity Data Logger
Temperature & Humidity Monitoring Alarm
2. Page 2 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
Please scan the QR code below or search in Apple store to download the APP for easy setting.
【UPGRADE HISTORY】
DATE VERSION DESCRIPTION
2017.9.15 V1.1
1. Add Modbus TCP Protocol
2. Add Definition Protocol
3. Support New Cloud Network App
2017.11.8 V2.0
1. Update Physical Layout and Installation Diagram
2. Update the Software Configuration
3. Update the SMS Command
2018.04.09 V2.1
1. Modbus TCP changed to Modbus RTU Protocol.
2. Add Continue Dialing Function Instructions and Related Commands
which is used to Modbus Protocol.
3. Update the Software Configuration
【Gentle Reminder】
Normal APP Cloud Monitor APP
【Model List】
Model GSM/GPRS/3G/4G Relay Output Sensor Type Record Measuring Range
S264 Optional 2
Temperature& Humidity
Model: AM230x
200000
Temp:-40-80°C , accuracy is±0.5°C;
Humidity:0-99 RH%, accuracy is± 3%;
S265 Optional 2
S266 Optional 2
DS18B20 Temperature
Probe
Temp:–55°C to +125°C (–67°F to
+257°F), accuracy is±0.5°C.
Notice
1. Default version is GSM;
2. For 3G WCDMA and 4G LTE version, please tell our sales where you would like to use them.
This handbook has been designed as a guide to the installation and operation of S264/265/266 GSM SMS GPRS 3G
4G Temperature&Humidity Monitoring Alarm.
Statements contained in the handbook are general guidelines only and in no way are designed to supersede the
instructions contained with other products.
We recommend that the advice of a registered electrician be sought before any Installation work commences.
King Pigeon Hi-Tech.Co., Ltd, its employees and distributors, accept no liability for any loss or damage including
consequential damage due to reliance on any material contained in this handbook.
King Pigeon Hi-Tech.Co., Ltd, its employees and distributors, accept no liability for GSM Network upgrading or
SIMCard upgrading due to the technology specifications contained in this handbook.
3. Page 3 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
Table of contents
1. Brief introduction......................................................................................................................................................3
2.Safety Directions........................................................................................................................................................3
3. Standard Packing List ...............................................................................................................................................4
4. Mainly Features ........................................................................................................................................................4
5. Specifications ............................................................................................................................................................4
6. Physical Layout and Installation Diagram ...............................................................................................................5
7. Initialize/Reset the GSM unit ...................................................................................................................................7
8. Settings&Operation..................................................................................................................................................7
9.SMS commands & APP (Recommend to use the APP)............................................................................................17
10. Data Communication Protocol .............................................................................................................................22
11. Upgrade Firmware................................................................................................................................................23
12.Warranty................................................................................................................................................................23
1. Brief introduction
The GSM SMS GPRS 3G 4G Temperature &Humidity Monitoring Alarm embedded GSM/GPRS/3G/4G module
and high performance MCU to provide an all in one instrument for data logging, Remote data acquisition, alarm
and control. It special for real-time remotely monitoring onsite temperature, humidity, power status and
automatically switch on/off equipments through wireless cellular network.
It provides 4/8 temperature &humidity probe inputs or 8 high precision temperature probe inputs. When the
temperature, humidity exceed high threshold or low threshold value, or external power goes off or on, will send
SMS alert to 10 preset mobile phone immediately or upload event data to remote server by GPRS/3G/4G network.
It provides daily report, schedule upload, event upload by the GPRS/3G/4G to monitoring center or by SMS to
the user mobile phone directly.
The Data Logger with large memory that can save 200000 events. It provides 2 Relay outputs for automatically
switch ON/OFF devices when Temperature & Humidity exceed high/low value and remote switch ON/OFF Device
by SMS or GPRS/3G/4G networks.
It has been designed as a cost effective, low power, easy use, and reliable data logger. It can be used in the
worldwide through the wireless cellular network, operation in anywhere, no distance limitation.
Typically applications:
Server room, Warehouse, Drug store, Medicine center, Seafood storage, Aquarium, Supermarket, hospital,
Hotel; Weather Stations remote control and data logging, Transformer stations, BTS room, agriculture, Supervision
and monitoring alarm systems, etc.
2.Safety Directions
Safe Startup
Do not use the unit when using GSM/3G/4G equipment is prohibited or might bring disturbance or
danger.
Interference
All wireless equipment might interfere network signals of the unit and influence its performance.
4. Page 4 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
3. Standard Packing List
Data Logger X 1; Antenna X 1; AC/DC adaptor (12V1.5A) X1; User Manual X 1.
Note: The package does not include any SIM card.
Optional: AM230x Temperature &Humidity Sensor, 1m, 5m, 20m;
DS18B20 Temperature Probe, 1m, 5m, 10m, 20m;
35mm Standard DIN rail fixed Bracket
4. Mainly Features
Can be operated from anywhere, no distance limitation;
Quad band 850/900/1800/1900Mhz GSM GPRS Module inside;
3G UMTS/HSDPA/4G Modules are optional.;
32 bit MCU, reliable performance with in-built watchdog;
Support temperature & humidity monitoring remotely in real-time;
Support 2 relay outputs,7A@125VAC,5A@125VAC, 20A@14VDC;
Exceed High/Low threshold value will Alert via SMS/Call/GPRS/3G/4G networks;
Supports 1 DNS or IP address as server, supports Modbus TCP, TCP/IP protocol over GPRS/3G/4G network;
Automatically resend the data while communication failure, GPRS failure will alert by SMS text;
Supports remotely restart the device, and configure it by SMS commands remotely;
Up to 10 user's phone number to receive alarm and daily report SMS/Call;
Provides daily report, schedule upload, event upload by the GPRS/3G/4G to monitoring center or by SMS to the
user mobile phone directly;
In-built rechargeable battery, power lost/recover alarm, low maintenance, 24×7 operation;
Internal 16MB memory, logs more than 200000 records;
Support Android/IOS APP, easily & friendly for use/configuration.
Support configure parameters, load profiles, export historical data and upgrade the firmware via PC;
Wall mount or 35mm standard DIN rail Design, convenient installation,
Metallic cover, small size, exterior dimension is L70*W88*H30mm.
5. Specifications
Item Reference Scope
5. Page 5 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
DC Power Supply Standard Adapter: DC 12V/1A Range 9~36VDC
Power Consumption Standby:12V/70mA; WorkingMax.:12V/300mA
GSM/3G Frequency
2G: 850/900/1800/1900Mhz
3G version Optional: (UMTS/HSDPA)
W:900/2100@UMTS 900/1800@GSM;
C:850/1900@UMTS 850/900/1800/1900@GSM;
T:850/2100@UMTS 850/900/1800/1900@GSM;
4G LTE
SIM Interface Supporting 3V SIM Card
External Antenna SMA Antenna interface, 50 Ohm
Serial Interfaces 1 USB Port
Temp.&Hum Inputs 4 / 8 channel (Optional)
Relay Outputs 2 Relay Outputs 7A@125VAC 5A@125VAC 20A@14VDC
Memory Capacity 16MB for 200000 record.
Backup Battery 3.7V 900mAH
Exterior Dimension 70*88*30mm
Installation 35mm standard DIN rail(Optional) Wall mount (Default)
Net Weight 500g
6. Physical Layout and Installation Diagram
6.1 Control Unit physical layout
LED Indicator Instruction
Cellular indicator, registering cellular Network flicks quickly, registered successful will
2seconds flick once.
Alarm indicator, while alarm occurrence, will turn on.
Armed indicator, in Armed mode, will turn on, in disarm mode, will turn off.
Relay indicator, any one relay close, will turn on.
6.2 Interface Instructions for installation
At the backside of the panel, please use the tool to remove the screw, and you can see the below:
6. Page 6 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
1) Insert SIMCard
Slide the SIM card holder in the direction of “OPEN” (etched on the SIM card holder), and then flip it open. Then
Insert the SIM card with its gold contacts facing down and its cut-off corner facing out the SIM card slot. See below
photo. Close the SIM card holder and then slide it in the opposite direction of “OPEN” to lock it. See above photo.
2) Connect External DC Power and Temperature & Humidity Sensor
See below interface, please contact the correct wires.
Interface Instruction
DC IN 9~36V
+ DC9~36V positive input, 1.5A, for power on the Unit;
– DC9~36V negative input, 1.5A, for power on the Unit;
RELAY
R1 Relay 1 output;
R2 Relay 2 output;
USB USB interface, used it to communicate with the computer.
ANT GSM/3G/4G antenna.
Temperature &
Humidity
VCC
3.3VDC Power Source output for sensors.
Connect to AM230x Sensor VCC wire or
Connect to DS18B20 sensor VCC wire, (Red wire).
GND GND , Connect to AM230x or DS18B20 GND wire, (black wire).
1~8
Data port, connect to the 1st
~8th
AM230x or DS18B20 Data wire,
(Yellow/Green wire).
Power Switch
SIMCard Holder
RESET Button
Upgrade Button
7. Page 7 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
3) Connect electrical device to Relay outputs.
The unit provides 2 relay outputs; it can be used for control different device according to requirements. The
connection diagram is below:
7. Initialize/Reset the GSM unit
The Unit can be reset to factory default once mistake programmed. Please follow below steps to initialize it. After
initialized, the parameters will set as factory default.
1) Switch off the Unit
2) Press and hold the RESET button;
3) Switch the Power Switch to ON side to powered on the Unit, holding 5 seconds, then loose the RESET Button.
4) Restart the unit then recovery to factory default settings, and will enter to work mode.
8. Settings&Operation
The GSM SMS GPRS 3G 4G Temperature &Humidity Monitoring Alarm is user-friendly design. The user can setup it
or export historic data by the PC Configuration through USB cable, and upgrade firmware by USB port.
Tips!
1) Please insert the SIM Card firstly, and install the GSM/3G/4G Antenna, please power on to check the
LEDs status according to above mentioned LED Definitions, keep switch on it during the programming.
2) The PC Configuration in the CD, please click it to run it. Also can download from www.GPRS-M2M.com
under S264/5/6 page directly.
Below is the steps to setup the parameters by PC Configuration, please follow it step by step.
Start to Configure:
Step1: Install the Configurator
The Configurator in the CD or download from www.GPRS-M2M.com, then installs it on the computer.
Step2: Connection
Please insert the SIM Card, and install the GSM/3G/4G Antenna.
Step3: Connect the RTU to the PC by USB Cable. And connect the external DC Power to DC Power
Ports, Power on, and switch on the device, see below:
8. Page 8 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
Step4: Install USB Drvier
Install the USB Driver to the computer from the CD firstly. When successful, it can be found out at
the device manager of the XP or Windows 7 or Win8/Win10, please see the below photo. Also, the
driver for different OS can be downloaded from Silicon Laboratories, Inc. http://www.silabs.com , the
model is CP210x.
Step5: Run the Configurator (Compatible with Windows XP/7/8/10)
Tips: In some computer, it required download net framework 4.0 while installation, then please click “Yes” to go to
Microsoft website to download this service pack.
Step6: Choose the correct "COM port" in device manager above, enter the password(default is
1234),click the "Login" to connect and start to program
Details please check the picture as below:
Tips: If not connect successfully, pls check if USB connect well, or COM port and password correct or not.
Drop-down menu interpretation:
9. Page 9 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
【File】:
【Load Profile】:Load the saved profile to the PC configurator, to quickly configure bulk device with
similar parameters.
【Export Profile】:Save the present configuration parameters as a profile for next device configuring
or backup the parameter settings.
【Log Out】:Exit the configuration.
【Connect】:
【Close the Port】:Disconnect the device and configuration software
【Open the Port】:Reconnect the device
【Setting】:
【Read Setting】:Read previous parameter setting of the device.
【Write Setting】:Write the present page parameters from PC configurator to device.
【DO Current status】:Read current status of relay output.
【TH Current Value】:Read current value of temperature and humidity.
【System】:
【Reset】:Reset the device to default settings.
【Reboot】:Restart the device and open the configuration software.
【Language】:
【Chinese】:Set the configurator language to Chinese.
【English】:Set the configurator language to English.
【Skins】:Choose color for configuration software (Reserved).
【Help】:
【About】:Configuration software relative information.
Basic Setting
10. Page 10 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
Reminder: Please click the "Read setting" for previous parameter before starting to set.
Arm automatically when power on: Tick it stands for once the data logger powered up, the data logger
will enter into Arm Mode automatically.
Tips:
Arm: Under this mode, any alarm occurrence will send SMS and dial the authorized numbers immediately. And execute
the programmed I/O outputs.
Disarmed: Under this mode, alarm occurrence will not send SMS & dial the authorized numbers.
Add timestamp to alarm SMS: Tick it stands for while alarm occurrence, the Alarm SMS will include the
data logger’s current time information at the SMS Content.
Press * or # to stop Dial: Not Tick, it will not continue to dial if someone answer; Tick it, Alarm dialing will
dial continue if not press the button, until press the * or # button.(4G version don’t support this
function,don’t tick it)
Device ID: (0~65535) non-necessary. This is mainly for monitoring center to identify the data logger; If
communicate via Modbus protocol, device ID only can be 1~255.
Device description: This is the description of the data logger, e.g.: installation address, usage
instructions and so on;(Max: 60 Characters)
Daily work report time: Data Logger send current status SMS reports to authorized numbers
automatically everyday.
How long delay to ensure alert after power off: Power failure alert (0~999 min), default 0, means SMS
alert immediately once power off; 999 means not alert.
Interval time to save historical record: (0~65535 s), how many seconds interval to save record, default
0, means not save.
Periodically SMS report interval time: (0~65535 min), how many minutes interval to SMS report current
status, default 0, means not report.
Auto Arm after Disarmed: Fill the timeout to enter into Armed Mode automatically after disarmed
operation. (0~9999 min), default 0 minute, means it will delay 30 seconds to auto Arm after Disarmed.
Password Setting: Change a new password. (4 digits, default is 1234, Arabic numerals only)
Device Time:
Write: Click it to save the time into the device after adjust the time.
Read: Read device current time.
PC Time: Read PC current time.
Reminder:
Please remember that click "Setting" -"Write Setting" button to save it after parameter be written.
11. Page 11 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
DO Setting
Tips: For example ,double click or right click "DOUT1/2" to set the parameter, below is similar.
Channel Name: To setup the channel name, default "Relay + Serial number ",max 40 digits.
Close Time: Independent control is not set here, it is only for timer and alarm-link close time.
(0~9999s) ,default 0 ,means always close.
Open Description: SMS content when relay open, max 40 digits, default open.
Close Description: SMS content when relay close, max 40 digits, default close.
Enable Recovery SMS Alert: Tick it to enable the recovery SMS function after relay finish working.
Current Status: Relay current status: Open or Close.
Reminder:
Please remember that click "Setting" -"Write Setting" button to save it after parameter be written.
Manual Switch: Close or Open the relay immediately, used for on-site testing.
12. Page 12 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
TH Setting
Channel Name: Default "Temperature or Humidity + Serial number ",max 40 digits.
Alarm Verify Time: Tick it Stands for when the temperature or humidity input exceed the threshold value
and last time more than this value, will be treated as a true alarm, if less than this value, then will not
alarm to avoid fault alarm. (0~999s), default 2 seconds.
Threshold High: The high value(reached) need to alarm; Example: set 50Celsius degree to alert.
Threshold Low: The low value(reached) need to alarm; Example: set -30Celsius degree to alert.
High Alarm SMS Content: To setup the SMS Content when high alarm, max 40 digits.
Low Alarm SMS Content: To setup the SMS Content when low alarm, max 40 digits.
Alarm Recovery SMS Content: Setup SMS Content when value back to normal from alarm, max 40
digits.
Enable: Tick it to enable this Channel.
Enable Recovery SMS Alert: Tick it to enable the Alarm Recovery SMS notification function.
Alarm-link DO1: Tick it to setup when this channel triggered, the alarm link the output relay 1 should close,
the relay close time according to Close Time (Range 0~9999S).Otherwise, the relay output will not
close.
Alarm-link DO2: Tick it to setup when this channel triggered, the alarm link the output relay 2 should close,
the relay close time according to Close Time (Range 0~9999S).Otherwise, the relay output will not
close.
Current Value: To show the current value of the sensors, used for testing.
Reminder:
Please remember that click "Setting" -"Write Setting" button to save it after parameter be written.
13. Page 13 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
Number Setting
Tips: Max 10 authorize users no., also double click or right click to enter and set parameters.
Alarm Tel Number: Set the alarm receiver numbers, please includes the country code, e.g. in China is
0086, input 008613570810254, if cannot received the SMS or dial, then try to set as
+8613570810254, but cannot be 8613570810254. Also, some GSM/3G Operators not required input
country code, so please remove country code, e.g. in China is 0086, and China Mobile not required
country code, so can set as 13570810254.
Dial: Tick it stands for enable while alarm, Dial to the authorized numbers. When someone answer, then
calling stop; If not, continue to call next number, total calling one round.
Timer-Report: Tick it stands for enable to SMS report to this authorized numbers.
Arm/Disarm SMS: Tick it stands for enable the SMS notification when Arm/Disarm.
Alarm: Tick it stands for enable while alarm, send SMS to the authorized numbers.
Alarm Recovery: Tick it stands for enable the SMS notification when the alarm recovery to normal value.
External Power ON/OFF: Tick it stands for enable the SMS notification when external power on/off.
GPRS Failure: Tick it stands for enable the SMS notification when the GPRS connection failure.
Low GSM Signal: Tick it stands for enable the SMS notification when the GSM signal is weakness.(Well
signal value:14~31).
Relay Close/Open: Tick it stands for enable the SMS notification when the relay close/open.
All: Tick it stands for enable all of options in this line, from “Dial ~ Relay Close/Open”.
Reminder:
Please remember that click "Setting" -"Write Setting" button to save it after parameter be written.
14. Page 14 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
Timer Setting
This page is for setup daily timer, it is useful for scheduling when to execute what action automatically.
Total can program 10 scheduling events. Tick Enabled stands for enable this timer event:
Week + Hour + Minute: Stands for what day and at what time does the Data Logger should execute the
action.
Action: Stands for what action does the Data Logger should to execute at the specified time.
E.g.: as above mentioned,
Every Sunday 01:20, Data Logger automatically Reboot.
Every Monday 03:10, Data Logger upload data by GPRS to server.
Every Tuesday 04:19, Data Logger send SMS reports to authorized numbers automatically.
Everyday 19:23, Data Logger will close the relay 1 automatically.(Relay close time is according to the
Close Time (Range 0~9999S))
Tips:
Action: If the action is for DOUT (relay),then the relay working time is depend on the DOUT parameter.
Reminder:
Please remember that click "Setting" -"Write Setting" button to save it after parameter be written.
15. Page 15 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
GPRS Setting
This Page is for setup the GPRS online parameters, GPRS Transport data protocol and Server information.
Only when you have Server or need to use GPRS to transmit data then need to setup these parameters.
The GPRS Protocol details please refer to <S264/5/6 GSM 3G 4G Temperature & Humidity Data Logger
GPRS/3G Protocol Instruction>.
Communication Type: Stands for setup the Communication type.( 0.Disable/ 1.Modbus RTU Protocol /
2.Definition Protocol)
GPRS Protocol: Stands for the GPRS transmission using TCP or UDP protocol; Default TCP.
Access Point Name: GPRS Access Point Name, provided by local GSM/3G Operator.
GPRS User Name: GPRS User Name, provided by local GSM/3G Operator.
GPRS Password: GPRS Password, provided by local GSM/3G Operator.
Heartbeat Content: For Modbus protocol, Default ACK, Max. 20 characters.
Heartbeat Interval: For Modbus protocol, (0~9999 s), Default 60, 0 means not upload.
Upload Data Interval Time: Stands for setup the interval time to upload the data to the server when
definition protocol chosen. Range:0~65535 Min; Default:5.
Server Domain/IP; Server Port: When using SMS command to set the communication type to Modbus
protocol , Will change automatically the domain “modbus.dtuip.com” , port “6651”; When set as a
definition protocol, the domain name is: “www.rtu-m2m.com”, port “8001”.
Login Message: For Modbus protocol, ASCII or hexadecimal optional, Max. 50 characters
Reminder:
Please remember that click "Setting" -"Write Setting" button to save it after parameter be written.
16. Page 16 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
Historical Record
This page is for manage and read out the historical record from the Data Logger, and can save as CS
format for other purpose usage.
For historical record, the Data Logger total can save 200000 records, but just can read 20000 records in
the configurator. Once it full, will automatically remove the earlier 100 records for new records.
The records will including all the values, such as time, T/H value, alarm, so on.
Read: Set the quantity which need to read, max 20000 historical records.
Single: Indicate one historical record to read, can choose it from 1~20000 records.
Clear: Clear the screen, clear the current display records.
Delete All: Delete all historical records in device, if 200000 records, delete them should need around one
hour.
:Choose the time to search the historical records.
Search: After setting the time period, click the button to search historical records in this time.
Export CSV: Export current display historical records to CSV format file.
Import CSV: Import the historical record file to current page.
17. Page 17 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
9.SMS commands & APP (Recommend to use the APP)
Notice:
1. The default Password is 1234.
2. The unit cannot support PIN Code Protected SIMCard.
3. You can program the GSM unit with SMS commands using your phone.
4. Remember that commands must be CAPITAL LETTERS. It is PWD not pwd, CAP not Cap etc. Don't add
spaces or any other character.
5. The PWD in the commands is means the password, when you use it, please in stand of it by the digital
number.
6. In some GSM operators they use different SMS parameter; the units can’t return the SMS confirmation in
some gsm operators, but it can performance the functions correctly. Also, you can try to add the country
code before the number, see the below settings:
7. If the password is correct but the command is incorrect, the S264/5/6 will return: SMS Format Error,
Please check Caps Lock in Command! So please check the Command, or add the country code before
the telephone number or check the input is in ENGLISH INPUT METHOD and CAPS LOCK. If password
incorrect then will not any response SMS.
8. Once the GSM Unit received the SMS Command, will return SMS to confirmation, if no SMS return, please
check your command or resend again.
9. The SMS commands that you will certainly use in the GSM units are the following:
**SMS Commands For Program and Operation the S264/5/6**
1) Setup the S264/5/6 SIMCard Number(Max 21 digits)
This number is used for automatically adjust the time from GSM Operator.
Command Return SMS Example
PWD+ TEL+ SIMCard Number+ # Set success! 1234TEL008613570810254#
2) External DC Status
Event Return SMS Content
External DC goes off External DC Power Goes OFF
External DC Power Goes ON External DC Power Goes ON
3) External DC Power Lost Delay Time to Alarm
SMS Command Return SMS Content
Setup
PWD+ ACxxx
(Notice: xxx stands for delay time,
range 000~999 minutes. =000,
External DC Power Lost Delay time to Alarm: xxx
minutes
For example:
E.g.: the country code is 0086, or +86.
The user cell phone number is 13600000000 and has been assigned as a SMS Alert number, the simcard
number in the panel is 13512345678.
When you setup the number as the authorized number, please setup as 008613600000000 or
+86136000000000. Not 13600000000.
18. Page 18 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
stands for alarm immediately, =999
stands for DC power lost will not
alarm. Default is 000)
Inquiry PWD+ AC
4) Modify Password(4digits, Default is: 1234)
Command Return SMS Example
PWD+ P+ new password
[new password],This is the New Password,
please remember it carefully.
1234P4321 stands for change
password from 1234 to 4321
5) Armed or Disarmed (After power on it is in Disarmed Mode)
Command Return SMS Example
Armed PWD+ AA Armed
Armed stands for while alarm occurrence, should send SMS or
dial to alert users,
Disarmed PWD+ BB Disarmed
Disarmed stands for while alarm occurrence, will not send
SMS or dial to alert users.)
6) Setup Device ID Number
SMS Command Return SMS Content
Setup
PWD+ IDxxxxx
Note: xxxxx range 0 ~ 65535,
default: 1, if the device uses
Modbus protocol, the effective
range of ID is 1 ~ 255
ID:XXXXX
Inquiry PWD+ IDE
7) Setup S264/5/6 system Time
If you GSM Operator cannot provide the time source then must setup the system time after power on.
Otherwise, the S264/5/6 will run it at mistake time. If you GSM Operator can provide time source, then no
need to setup this time, but must setup the SIM Card number as 1) required.)
For yy/mm/dd/hh/mm, each have two digits in the command.
Command Return SMS Example
Setup PWD+ DyymmddThhmm xx(Y)XX(M)XX(D)xx(H)X(M) 1234D170510T1258
Inquiry PWD+ D xx(Y)XX(M)XX(D)xx(H)X(M) 1234D
8) Inquiry Current Status SMS command
SMS Command Return SMS Content
PWD+ EE
Time
Device ID:
Armed/Disarmed
GSM Signal Value:
External DC Power Goes OFF/ON
Temperature 1 Channel Name:Current Value,Normal/High
Alarm/Low Alarm
Humidity 1 Channel Name: Current Value, Normal/High
Alarm/Low Alarm
19. Page 19 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
……
DO1 Channel Name: Close/Open
DO2 Channel Name: Close/Open
Model:
Version:
Device Description:
9) Setup 10 User Number, max 21 digits. ( Return 1~5 or 6~10 separately while setting.)
SMS Command Return SMS Content
Setup
PWD+ A+ series number+ T+ tel number
Notice: Series number = 01~10
Tel1:
Tel2:
Tel3:
Tel4:
Tel5:
Inquiry PWD+ A Return all numbers
Delete PWD+ A+ series number Return 1~5 or 6~10 numbers.
10) Setup Daily Report Time
SMS Command Return SMS Content
Setup
PWD+ DRT+ xx+ yy
(Notice: xx =00~23, stands for hour. yy=00~59,stands for minutes.)
Daily SMS Report at: xx:xx
Inquiry PWD+ DRT
Delete PWD+ DRTDEL (means not report, default)
11) Setup Periodically SMS Report Interval Time
SMS Command Return SMS Content
Setup
PWD+ DTxx
(Notice: xx=0~65535minutes, 0=stands for disable, default is 0)
Periodically SMS Report
interval time is: xx minutes
Inquiry PWD+ DT
12) SMS Control Relay Output
SMS Command Return SMS Content
Set DO Name PWD+ DO+ channel number+ T+ DO Name DOx: xxxx
Inquiry DO Name PWD+ DO+ channel number<nn> DOx: xxxx
Set Close Description PWD+ DOC+ channel number+ T+ Description DOCx: Close(Default)
Inquiry Close
Description
PWD+ DOCT+ channel number DOCx: Close(Default)
Set Open Description PWD+ DOO+ channel number+ T+ Description DOOx: Open(Default)
Inquiry Open
Description
PWD+ DOOT+ channel number DOOx: Open(Default)
Switch ON(Close) PWD+ DOC+ channel number<nn> DOx: ON
Switch OFF(Open) PWD+ DOO+ channel number<nn> DOx: OFF
Inquiry all DO Current
Status
PWD+ DOE
DO1: ON/OFF
DO2: ON/OFF
Set Pulse Output time PWD+ DOP+ channel number<nn>+ T+ xxxx DOx Pulse Output Time: xxxxS
20. Page 20 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
(Notice: xxxx=0~9999seconds, default=0 stands for
always close)
Inquiry pulse output
time
PWD+ DOT
DO1 Pulse Output Time: xxxxS
DO2 Pulse Output Time: xxxxS
Control the Pulse
Output
PWD+ DOP+ channel number<nn>
13) Setup the Temperature & Humidity Alarm Parameter
Command Return SMS Example
Setup
Temperature
& Humidity
Channel
Name
PWD+ AIN+ Series Number+
T+ Channel Name
(Series number: two digits, S264
is 01~08, S265/S266 is 01~16;
Name max 40 digits)
AIN1:Temperature(Default)
AIN2:Humidity(Default)
......
AIN15:Temperature(Default)
AIN16:Humidity(Default)
1234AIN03TCooling Room
Inquiry the
Channel
Name
PWD+ AIN+ Series Number
<nn>
1234AIN0102 to inquiry 1 and 2
Channel name
Setup
Threshold
Value
PWD+ AINR+ Series
Number+ Lxxx+ Hxxx+ #
Temperature: Low: xxxC,
High: xxxC
Humidity: Low: xxxRH%,
High: xxxRH%
1234AINR01L-20H23# to setup
low value as -20C, and high
value is 23C.
Inquiry PWD+ AINR 1234AINR
Inquiry the
Current Value
PWD+ AINE
Temperature: xxxC,
Normal/High/Low;
Humidity: xxxRH%,
Normal/High/Low;
1234AINE
Setup the
High Alarm
SMS Content
PWD+ AINH+ Series
Number+ T+ xxxxxx
(Notice: xxxxx=SMS content,
Max:40 Characters )
AINHx: High Alarm (Default)
1234AINH01THigh Alarm
Inquiry the
High Alarm
SMS Content
PWD+ AINH+ Series
Number<nn>
1234AINH0102
This command can inquiry the
SMS content both channel 1
and channel 2
Setup the
Low Alarm
SMS Content
PWD+ AINL+ Series
Number+ T+ xxxxxx
(Notice: xxxxx=SMS content,
Max:40 Characters)
AINLx: Low Alarm (Default)
1234AINL01TLow Alarm
Inquiry the
Low Alarm
SMS Content
PWD+ AINL+ Series
Number<nn>
1234AINL0102
This command can inquiry the
SMS content both channel 1
and channel 2
Setup the
Recovery
SMS Content
PWD+ AINTHR+ Series
Number+ T+ xxxxxx
(Notice: xxxxx=SMS content,
Max:40 Characters)
AINTHRx: Recovery(Default) 1234AINTHR01TRecovery
21. Page 21 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
Inquiry the
Recovery
SMS Content
PWD+ AINTHR+ Series
Number<nn>
1234AINL0102
This command can inquiry the
SMS content both channel 1
and channel 2
Setup the
Temperature
& Humidity
Alarm Verify
Time
PWD+ AIN+ Series Number+
Qyyy
(Notice: yyy=0~999s, default=2
second,999=Not alarm)
Temperature: yyy Seconds
Humidity: yyy Seconds
1234AIN01Q002
This command set the alarm
verify time is 2
seconds.(Default)
Inquiry the
Temperature
& Humidity
Alarm Verify
Time
PWD+ AINQ
1234AINQ
This command stands for
inquiry all the channnels
14) Setup save historical data periodically time
SMS Command Return SMS Content
Setup
PWD+ HISSAVE+ xxxxx
(Notice: xxxxx=0~65535 seconds, default is 0, stands for
not save.)
save historical data
periodically time is: xxxxx
Seconds
Inquiry PWD+ HISSAVE
15) Setup the Server Parameter (Cannot Setup the DNS by SMS)
SMS Command Return SMS Content
Set Server IP
PWD+ IP+ IP address+ *+ Server port
(IP address can write to domain) Server:
Port:Inquiry PWD+ IP
Delete PWD+ IPDEL
16) Setup the GPRS Parameter (APN/USER NAME/PASSWORD)
SMS Command Return SMS Content
Setup
PWD+ AP+ apn+ #+ username+ #+ userpassword
(Notice: apn=access point name)
APN:
User Name:
Password:
Inquiry PWD+ AP
Delete PWD+ APDEL
17) Set GPRS Online/OFF
SMS Command Return SMS Content
GPRS online PWD+ GPRSonline Online
GPRS OFF PWD+ GPRSOFF GPRS/3G Off
18) Setup the GPRS Communication Protocol
SMS Command Return SMS Content
Setup
PWD+ GPRSON+ x
(Notice: x=1/2; 1:Modbus; 2:Definition Protocol) GPRS/3G:
Inquiry PWD+ INTE
22. Page 22 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
Note: Set to Modbus protocol, the server parameters will be automatically changed to the domain name
“modbus.dtuip.com”, port “6651”; Set to definition protocol, the server parameters will be changed
automatically to the domain name “www.rtu-m2m.com”, port “8001”
19) Reboot By SMS
SMS Command Return SMS Content
PWD+ REBOOT Restart the device
20) Remote Factory Reset Parameters
SMS Command Return SMS Content
PWD+ RESET Set Successfully
21) Setup the Login Message (used for Modbus Protocol)
SMS Command Return SMS Content
Setup
PWD+ RTP+ Login Message content
Max. 50 characters Registration package: …
Inquiry PWD+ RTE
22) Setup the Heartbeat (used for Modbus Protocol)
SMS Command Return SMS Content
Setup
PWD+ HET+ Heartbeat content
Max. 20 characters, Default ACK
Heartbeat package content:
ACK
Inquiry PWD+ HEE
23) Setup the Heartbeat Interval (used for Modbus Protocol)
SMS Command Return SMS Content
Setup
PWD+ HT+ xxx
xxx=0~9999, =0 stands for not upload, Default 60 seconds
Heart Pack Period:
xxx seconds
Inquiry PWD+ HTE
24) Whether continue dialing after the alarm dialing answered
SMS Command Return SMS Content
Stop dialing
(default)
PWD+ COFF#
Note: Anyone answered, will not continue dialing
Set Successfully
Continue dialing
PWD+ CON#
Note: Continue dialing if did not press the button after the
answered, Press * or # button to stop dialing.
(4G version don’t support this function)
10. Data Communication Protocol
The S264/5/6 support GPRS/3G/4G data transfer to cloud server, support Modbus RTU protocol,
TCP/IP protocol and GPRS definition protocol. For Definition Communication protocol, please refer to
<S264/5/6 GPRS/3G/4G Temperature Humidity Data Logger Protocol Instruction>.
1.Modbus Register Address(support function 01 05 15)
23. Page 23 of 23 King Pigeon Hi-Tech. Co., Ltd. Ver 2.1
GSM/SMS/GPRS/3G/4G
Temperature&Humidity Data Logger
DO1 DO2
0x00 0x01
2.Modbus Temperature Humidity Address(support function 04),value amplification coefficient is 10.
Temperature1 Humidity 1 Temperature 2 Humidity 2 Temperature3 Humidity 3 Temperature4 Humidity 4
0x9C40 0x9C41 0x9C42 0x9C43 0x9C44 0x9C45 0x9C46 0x9C47
Temperature5 Humidity 5 Temperature 6 Humidity 6 Temperature7 Humidity 7 Temperature8 Humidity 8
0x9C48 0x9C49 0x9C4A 0x9C4B 0x9C4C 0x9C4D 0x9C4E 0x9C4F
11. Upgrade Firmware
The S264/5/6 supports upgrade firmware via USB port directly. If we upgraded the firmware
functions of the data loggers, we will inform you to upgrade the firmware if you required. If there any
new requirements of the present functions caused it should update the firmware, the user can
upgrade them directly by USB port. If you required upgrade, please contact us to modify the
firmware according to you requirements, and we will provide the upgraded firmware to you to
upgrade them.
12.Warranty
1) This system is warranted to be free of defects in material and workmanship for one year.
2) This warranty does not extend to any defect, malfunction or failure caused by abuse or misuse by the
Operating Instructions. In no event shall the manufacturer be liable for any alarm system altered by
purchasers
Any questions please help to contact us feel free.
Http://www.GPRS-M2M.com
--- The End! ---