(RIA) Call Girls Bhosari ( 7001035870 ) HI-Fi Pune Escorts Service
Textile dyeing machinery ( Jigger & Winch).
1. Presentation Speech
For
Machine Technology & Maintenance of Wet Processing
Machinery (WPT-403)
Group- Rainbow
Program: Bachelor of Science in Textile Engineering
City University
2. Presented By: Group-Rainbow
Group Members:
Supervised By:
Tonmoy Saha
Lecturer,
Dept. of Textile Engineering
City University
.
Serial
No.
Name ID
01 Md. Azizul Haque 141265542
02 Md. Jubair Rahaman 141265517
03 Md. Selim Rana 141265520
04 Mohammadullah Riyad 141265531
05 Md. Rakib Hasan 141265518
06 Abdul Rabbi Ahmed 141265513
7. Features of Jigger Dyeing Machine
Discontinuous Dyeing.
Most commonly used pieced dyeing m/c.
Fabric is dyed in open width in uniform tension.
Fabric moves but liquor does not circulate.
It is used specially for woven fabrics.
Rollers rotate clockwise and anticlockwise.
8. Technical Details of Jigger Dyeing Machine
1. Fabric tension 50 - 800 N
2. Fabric speed 10 to 150 m/min
3. Fabric width up to 5400 mm
4. Roller width up to 5600 mm
5. Roller diameter 330 - 550 mm
6. Batch diameter 1000/1230/1450 mm
7. M:L 1:7 to 1:10
8. Time required 4-10 hours
9. Fabric can be dyed 500-1000 yards
10. Temperature and pressure Normal atmospheric pressure and under 1000C
9. Main Parts of the Jigger Machine
Guide roller
Take up roller
Let off roller
Steam channel
Dye bath
10. Process Description of Jigger Dyeing Machine
Fabric inlet by
take up roller
Preparation
tank
Dyeing in
progress
Control panel Unloading after
dyeing
Fabric inlet
Dye + chemical
padding
Dyeing in progress
Control panel
Fabric outlet
16. Features of Winch Dyeing Machine
Discontinuous Dyeing.
Fabric is dyed in rope form in this m/c.
It is used specially for Knit fabrics.
Fabric moves but liquor does not circulate.
Rollers rotate clockwise and anticlockwise.
Heating can be supplied by means of direct or
indirect stem heating.
17. Technical Details of Winch M/c
1. Fabric tension Little Tension
2. Maximum fabric speed approximately 40m/min.
3. Capacity per nozzle theoretically 250 kg but practically not more than
200 kg.
4. Reel/Winch speed 150-250 rpm
5. M:L 1:20 to 1:40
6. Time required Lengthier than other m/c.
7. Nozzle pressure 4-6 psi
8. Maximum Temperature 140 for high temp. M/c & 100 for atmospheric
9. Main motor efficiency 80-85%
18. Main Parts of the Machine
Winch
Water inlet pipe
Steam pipe
Dyeing tank
Drain valve
19. Dyeing Procedure of Winch M/c
Fabric loading Mix dyes &
chemical
Dyeing in
progress
Control panel Dyed fabric
Fabric Loading
Mix dye &
chemical
Dyeing in
progress
Control panel
Dyed fabric