RCC components are mainly beams and columns are sturdy and strong in flexure when they are utilized with Carbon Fibre Reinforced Polymers CFRP composites which are epoxy bonded for tensile zones with the direction of fibres parallel to it of high tensile stresses. The mechanical behavior of composite concrete structures is difficult to analyze by an analytical model, due to the nonlinear behavior of the composite material. FE analysis is an efficient solution to overcome the problems. A load defection response, stress response and strain response were measured when CFRP reinforcement was provided, the stiffer response was observed at a relatively reduction in deflection, stress and strain in CFRP sheet.Finite Element Method analysis for the investigation of deformation and stresses. Ansys 14.5 software is used for finite element modelling. In this study unreinforced beam and beam reinforced with CFRP are compared on the basis of deformation and stresses. Rahul Dev Bharti | Prof. Nitesh Khuswaha "Comparative Study on RCC Beam with & without Carbon Fibre Reinforced Polymer using Ansys Software" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29628.pdfPaper URL: https://www.ijtsrd.com/engineering/civil-engineering/29628/comparative-study-on-rcc-beam-with-and-without-carbon-fibre-reinforced-polymer-using-ansys-software/rahul-dev-bharti
EXPERIMENTAL STUDY OF RETROFITTED RC BEAMS USING FRPAM Publications
In order to improve the performance of reinforced cement concrete structure (RCC) it is better to repair or upgrade the structure by retrofitting. Retrofitting is one of the best options to make an existing inadequate building safe against future probable earthquake or other environmental forces. Retrofitting is the modification of existing structure to make them more resistance to seismic action, motion of ground and failure of soil due to earthquake or other natural calamities such as tornadoes cyclones and winds with high velocity caused by thunder storm, snow fall, hailstorms, etc. The study investigate the improvements in the structural behaviour of the RC beams retrofitted with various types of FRP such as glass fibres, coir fibres, banana fibres, jute fibres and cotton fibres. The experimental programme includes strengthening and flexural strength test of 18 simply supported RC beams of 500x100x100 mm. The test results showed an increase in ultimate load for the retrofitted beam when compared to normal control beam and corresponding increase in the value of modulus of rupture. The retrofitted beams with glass fibre using epoxy as binder having 47.32% more strength than the control beams. Area under load-deflection curve gives toughness. Toughness value is found to be more in RC beams retrofitted with banana fibre.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
EXPERIMENTAL STUDY OF RETROFITTED RC BEAMS USING FRPAM Publications
In order to improve the performance of reinforced cement concrete structure (RCC) it is better to repair or upgrade the structure by retrofitting. Retrofitting is one of the best options to make an existing inadequate building safe against future probable earthquake or other environmental forces. Retrofitting is the modification of existing structure to make them more resistance to seismic action, motion of ground and failure of soil due to earthquake or other natural calamities such as tornadoes cyclones and winds with high velocity caused by thunder storm, snow fall, hailstorms, etc. The study investigate the improvements in the structural behaviour of the RC beams retrofitted with various types of FRP such as glass fibres, coir fibres, banana fibres, jute fibres and cotton fibres. The experimental programme includes strengthening and flexural strength test of 18 simply supported RC beams of 500x100x100 mm. The test results showed an increase in ultimate load for the retrofitted beam when compared to normal control beam and corresponding increase in the value of modulus of rupture. The retrofitted beams with glass fibre using epoxy as binder having 47.32% more strength than the control beams. Area under load-deflection curve gives toughness. Toughness value is found to be more in RC beams retrofitted with banana fibre.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
ANALYTICAL INVESTIGATION ON DYNAMIC BEHAVIOUR OF COMPOSITE BEAMIAEME Publication
In recent years, the use of composite structures with Glass Fibre Reinforced
Plastic (GFRP) material has increased greatly due to its non-corrosive, nonconductive,
high strength-to-weight ratio, relevant fatigue endurance and cost
competitiveness. In this paper, the dynamic behavior of beams reinforced with GFRP
material of sizes 10, 12, and 16 mm bars placed at the tension zone was modeled and
tested against horizontal loading pattern using the software ANSYS 16.1.
Characteristics of composite beam viz. stiffness and displacement are studied against
vibrations and frequency, respectively, against conventional beam. Analytical results
of ANSYS 16.1 software are i) beams with 16 mm GFRP material placed at tension
shown less displacement ii) beams with 16 mm GFRP material placed at tension zone
shown an increase displacement of 14.2% over conventional beam but with maximum
frequency of 100Hz iii) beams with 10 mm and 12 mm GFRP material placed at
tension zone shown less variations in their displacements iv) for a similar
displacements, beams with GFRP material shown lesser frequency than conventional
and v) increasing the stiffness leads to decrease in vibration of composite beam.
Structural Engineering Properties of Fibre Reinforced Concrete Based On Recyc...IJERA Editor
Glass fibre reinforced plastics (GFRP) based on resin recovered from recycling plastic waste has been shown to possess mechanical properties satisfying normative requirements. This paper investigates the flexural behavior of concrete beams reinforced with GFRP produced from resin recovered from recycled plastic wastes. A total of fifteen of beams of sizes 150 ×150 ×900mm and 100 × 100 × 500mm reinforced with GFRP made from recycled glass fibre reinforced polymer was tested. The flexural test results yielded lower ultimate load, lower stiffness and larger deflections at the same load when compared with the control steel reinforced beam. However, the ultimate flexural strength of beams, reinforced with GFRP from recycled resin was at least four times higher than that of the control unreinforced beam. This is in agreement, quantitatively and qualitatively, with the trend of these parameters in GFRP reinforced concrete based on virgin resins. The results therefore confirm the applicability for structural uses with the accompanying benefits of wealth creation, value addition and environmental sustainability.
Reinforcement of Reinforced Concrete Beams using CFRP and GFRPijtsrd
Concrete, steel and masonry materials are the common materials used for housing, office buildings, bridges, power plant structures and these structures are being deteriorated with age. The deterioration of the structures is due to the design deficiency, materials deficiency, poor workmanship and extreme loads. Most of the investigation reports on strengthening of damaged RC structures are based on patch repairing and using FRP sheets for flexural, shear and compressive strengthening of members. This research work is mainly focused on retrofitting of RC beams using GFRP and CFRP sheets. In this study the flexural behaviour of M 20, 40and M60grade RC beams retrofitted with single, double and triple layers of GFRP sheets is done and all the beams are analysed using ANSYS modelling and compare with the experimental results. From the presence study, it is derived that strengthening of RC beams with GFRP and CFRP sheets can enhance the load carrying capacity of beams and at the same time deflections up to yield stage of loading is increased and further the deflections are reduced up to ultimate stage of loading. The RC beams strengthened with GFRP and CFRP sheets show a marked reduction in crack width at all stages of loading and substantial delay in the formation of first crack. Satrughan Singh | Puspendra Kushwaha "Reinforcement of Reinforced Concrete Beams using CFRP and GFRP" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-6 , October 2022, URL: https://www.ijtsrd.com/papers/ijtsrd52006.pdf Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/52006/reinforcement-of-reinforced-concrete-beams-using-cfrp-and-gfrp/satrughan-singh
ANALYTICAL INVESTIGATION ON DYNAMIC BEHAVIOUR OF COMPOSITE BEAMIAEME Publication
In recent years, the use of composite structures with Glass Fibre Reinforced
Plastic (GFRP) material has increased greatly due to its non-corrosive, nonconductive,
high strength-to-weight ratio, relevant fatigue endurance and cost
competitiveness. In this paper, the dynamic behavior of beams reinforced with GFRP
material of sizes 10, 12, and 16 mm bars placed at the tension zone was modeled and
tested against horizontal loading pattern using the software ANSYS 16.1.
Characteristics of composite beam viz. stiffness and displacement are studied against
vibrations and frequency, respectively, against conventional beam. Analytical results
of ANSYS 16.1 software are i) beams with 16 mm GFRP material placed at tension
shown less displacement ii) beams with 16 mm GFRP material placed at tension zone
shown an increase displacement of 14.2% over conventional beam but with maximum
frequency of 100Hz iii) beams with 10 mm and 12 mm GFRP material placed at
tension zone shown less variations in their displacements iv) for a similar
displacements, beams with GFRP material shown lesser frequency than conventional
and v) increasing the stiffness leads to decrease in vibration of composite beam.
Structural Engineering Properties of Fibre Reinforced Concrete Based On Recyc...IJERA Editor
Glass fibre reinforced plastics (GFRP) based on resin recovered from recycling plastic waste has been shown to possess mechanical properties satisfying normative requirements. This paper investigates the flexural behavior of concrete beams reinforced with GFRP produced from resin recovered from recycled plastic wastes. A total of fifteen of beams of sizes 150 ×150 ×900mm and 100 × 100 × 500mm reinforced with GFRP made from recycled glass fibre reinforced polymer was tested. The flexural test results yielded lower ultimate load, lower stiffness and larger deflections at the same load when compared with the control steel reinforced beam. However, the ultimate flexural strength of beams, reinforced with GFRP from recycled resin was at least four times higher than that of the control unreinforced beam. This is in agreement, quantitatively and qualitatively, with the trend of these parameters in GFRP reinforced concrete based on virgin resins. The results therefore confirm the applicability for structural uses with the accompanying benefits of wealth creation, value addition and environmental sustainability.
Reinforcement of Reinforced Concrete Beams using CFRP and GFRPijtsrd
Concrete, steel and masonry materials are the common materials used for housing, office buildings, bridges, power plant structures and these structures are being deteriorated with age. The deterioration of the structures is due to the design deficiency, materials deficiency, poor workmanship and extreme loads. Most of the investigation reports on strengthening of damaged RC structures are based on patch repairing and using FRP sheets for flexural, shear and compressive strengthening of members. This research work is mainly focused on retrofitting of RC beams using GFRP and CFRP sheets. In this study the flexural behaviour of M 20, 40and M60grade RC beams retrofitted with single, double and triple layers of GFRP sheets is done and all the beams are analysed using ANSYS modelling and compare with the experimental results. From the presence study, it is derived that strengthening of RC beams with GFRP and CFRP sheets can enhance the load carrying capacity of beams and at the same time deflections up to yield stage of loading is increased and further the deflections are reduced up to ultimate stage of loading. The RC beams strengthened with GFRP and CFRP sheets show a marked reduction in crack width at all stages of loading and substantial delay in the formation of first crack. Satrughan Singh | Puspendra Kushwaha "Reinforcement of Reinforced Concrete Beams using CFRP and GFRP" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-6 , October 2022, URL: https://www.ijtsrd.com/papers/ijtsrd52006.pdf Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/52006/reinforcement-of-reinforced-concrete-beams-using-cfrp-and-gfrp/satrughan-singh
Fiber reinforced polymer reinforcement for construction state of the art revieweSAT Journals
Abstract
Development of civil engineering is intimately connected to innovation in structural material. To full fill the requirement of advance infrastructure in India, modern technologies and innovative materials has started to makes its way. Structures with bar corrosion and other distresses requires repair, rehabilitation and retrofits for increase strength, durability and much more life span. Fiber reinforce plastic (FRP) reinforcements provides solution for such work due to its non-corrosive and non-magnetic nature also high strength and low weight ratio. Now a day FRP materials are used for internal reinforcement for RC structures worldwide.
Keywords: Fiber reinforced polymer (FRP), strength, durability, shear and flexure, fire endurance
Analysis of Retrofitting Non-Linear Finite Element Of RCC Beam And Column Usi...IJERA Editor
Many of the existing reinforced concrete structures throughout the world are in urgent need of strengthening, repair or reconstruction because of deterioration due to various factors like corrosion, lack of detailing, failure of bonding between beam-column joints, increase in service loads, etc., leading to cracking, spalling, loss of strength, deflection, etc., Direct observation of these damaged structures has shown that damage occurs usually at the beam-column joints, with failure in bending or shear, depending on geometry and reinforcement distribution type.A nonlinear finite element analysis that is a simulation technique is used in this work to evaluate the effectiveness of retrofitting technique called “wrapping technique” for using carbon fibres (FRP) for strengthening of RC beam-column connections damaged due to various reasons. After carrying out a nonlinear finite element analysis of a reinforced concrete frame (Controlled Specimen) and reinforced concrete frame where carbon fibres are attached to the beam column joint portion in different patterns ,the measured response histories of the original and strengthened specimens are then subsequently compared. It is seen that the strengthened specimens exhibit significant increase in strength, stiffness, and stability as compared to controlled specimens. It appears that the proposed simulation technique will have a significant impact in engineering practice in the near future.
Experimental and numerical study on behavior of externally bonded rc t beams ...IJARIIT
Fiber-reinforced polymer (FRP) application is a very effective way to repair and strengthen structures that have
become structurally weak over their life span. FRP repair systems provide an economically viable alternative to traditional
repair systems and materials. In this study, an experimental investigation on the flexural behavior of RC T-beams
strengthened using glass fiber reinforced polymer (GFRP) sheets are carried out.
Reinforced concrete T beams externally bonded with GFRP sheets were tested to failure using a symmetrical two
point static loading system. Seven RC T-beams were casted for this experimental test. All of them were weak in flexure and
were having same reinforcement detailing. One beam was used as a control beam and six beams were strengthened using
different configurations of glass fiber reinforced polymer (GFRP) sheets. Experimental data on load, deflection and failure
modes of each of the beams were obtained. The effect of different amount and configuration of GFRP on ultimate load
carrying capacity and failure mode of the beams were investigated.
The experimental results show that externally bonded GFRP can increase the flexural capacity of the beam
significantly. In addition, the results indicated that the most effective configuration was the U-wrap GFRP.A series of
comparative studies on deflection between the present experimental data and results from finite element method and IS code
method were made. A future area of research are being outlined.
Review Paper on Nanotechnology-enhanced fiber-reinforced polymer compositesAdib Bin Rashid
Incorporating nanoparticles can significantly improve the performance and functionality of fiberreinforced polymer (FRP) composites. Different techniques exist for processing, testing, and implementing nanocomposites in various industries. Depending on these factors, these materials can be tailored to suit the specific applications of the automotive and aerospace industries, defence industries, biomedical and energy sectors etc. Nanotechnology offers several potential benefits for composites, including improved mechanical properties, surface modification, and sensing capabilities. This paper discusses the different types of nanoparticles, nanofibers, and nano-coating that can be used for reinforcement, surface modification, and property enhancement in FRP composites. It also examines the challenges associated with incorporating nanotechnology into composites and provides recommendations for potential opportunities in future work. This
study is intended to offer a comprehensive understanding of the current research on using nanotechnology in FRP composites and its potential impact on the composites industry
‘Six Sigma Technique’ A Journey Through its Implementationijtsrd
The manufacturing industries all over the world are facing tough challenges for growth, development and sustainability in today’s competitive environment. They have to achieve apex position by adapting with the global competitive environment by delivering goods and services at low cost, prime quality and better price to increase wealth and consumer satisfaction. Cost Management ensures profit, growth and sustainability of the business with implementation of Continuous Improvement Technique like Six Sigma. This leads to optimize Business performance. The method drives for customer satisfaction, low variation, reduction in waste and cycle time resulting into a competitive advantage over other industries which did not implement it. The main objective of this paper ‘Six Sigma Technique A Journey Through Its Implementation’ is to conceptualize the effectiveness of Six Sigma Technique through the journey of its implementation. Aditi Sunilkumar Ghosalkar "‘Six Sigma Technique’: A Journey Through its Implementation" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64546.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64546/‘six-sigma-technique’-a-journey-through-its-implementation/aditi-sunilkumar-ghosalkar
Edge Computing in Space Enhancing Data Processing and Communication for Space...ijtsrd
Edge computing, a paradigm that involves processing data closer to its source, has gained significant attention for its potential to revolutionize data processing and communication in space missions. With the increasing complexity and data volume generated by modern space missions, traditional centralized computing approaches face challenges related to latency, bandwidth, and security. Edge computing in space, involving on board processing and analysis of data, offers promising solutions to these challenges. This paper explores the concept of edge computing in space, its benefits, applications, and future prospects in enhancing space missions. Manish Verma "Edge Computing in Space: Enhancing Data Processing and Communication for Space Missions" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64541.pdf Paper Url: https://www.ijtsrd.com/computer-science/artificial-intelligence/64541/edge-computing-in-space-enhancing-data-processing-and-communication-for-space-missions/manish-verma
Dynamics of Communal Politics in 21st Century India Challenges and Prospectsijtsrd
Communal politics in India has evolved through centuries, weaving a complex tapestry shaped by historical legacies, colonial influences, and contemporary socio political transformations. This research comprehensively examines the dynamics of communal politics in 21st century India, emphasizing its historical roots, socio political dynamics, economic implications, challenges, and prospects for mitigation. The historical perspective unravels the intricate interplay of religious identities and power dynamics from ancient civilizations to the impact of colonial rule, providing insights into the evolution of communalism. The socio political dynamics section delves into the contemporary manifestations, exploring the roles of identity politics, socio economic disparities, and globalization. The economic implications section highlights how communal politics intersects with economic issues, perpetuating disparities and influencing resource allocation. Challenges posed by communal politics are scrutinized, revealing multifaceted issues ranging from social fragmentation to threats against democratic values. The prospects for mitigation present a multifaceted approach, incorporating policy interventions, community engagement, and educational initiatives. The paper conducts a comparative analysis with international examples, identifying common patterns such as identity politics and economic disparities. It also examines unique challenges, emphasizing Indias diverse religious landscape, historical legacy, and secular framework. Lessons for effective strategies are drawn from international experiences, offering insights into inclusive policies, interfaith dialogue, media regulation, and global cooperation. By scrutinizing historical epochs, contemporary dynamics, economic implications, and international comparisons, this research provides a comprehensive understanding of communal politics in India. The proposed strategies for mitigation underscore the importance of a holistic approach to foster social harmony, inclusivity, and democratic values. Rose Hossain "Dynamics of Communal Politics in 21st Century India: Challenges and Prospects" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64528.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/history/64528/dynamics-of-communal-politics-in-21st-century-india-challenges-and-prospects/rose-hossain
Assess Perspective and Knowledge of Healthcare Providers Towards Elehealth in...ijtsrd
Background and Objective Telehealth has become a well known tool for the delivery of health care in Saudi Arabia, and the perspective and knowledge of healthcare providers are influential in the implementation, adoption and advancement of the method. This systematic review was conducted to examine the current literature base regarding telehealth and the related healthcare professional perspective and knowledge in the Kingdom of Saudi Arabia. Materials and Methods This systematic review was conducted by searching 7 databases including, MEDLINE, CINHAL, Web of Science, Scopus, PubMed, PsycINFO, and ProQuest Central. Studies on healthcare practitioners telehealth knowledge and perspectives published in English in Saudi Arabia from 2000 to 2023 were included. Boland directed this comprehensive review. The researchers examined each connected study using the AXIS tool, which evaluates cross sectional systematic reviews. Narrative synthesis was used to summarise and convey the data. Results Out of 1840 search results, 10 studies were included. Positive outlook and limited knowledge among providers were seen across trials. Healthcare professionals like telehealth for its ability to improve quality, access, and delivery, save time and money, and be successful. Age, gender, occupation, and work experience also affect health workers knowledge. In Saudi Arabia, healthcare professionals face inadequate expert assistance, patient privacy, internet connection concerns, lack of training courses, lack of telehealth understanding, and high costs while performing telemedicine. Conclusions Healthcare practitioners telehealth perceptions and knowledge were examined in this systematic study. Its collection of concerned experts different personal attitudes and expertise would help enhance telehealths implementation in Saudi Arabia, develop its healthcare delivery alternative, and eliminate frequent problems. Badriah Mousa I Mulayhi | Dr. Jomin George | Judy Jenkins "Assess Perspective and Knowledge of Healthcare Providers Towards Elehealth in Saudi Arabia: A Systematic Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64535.pdf Paper Url: https://www.ijtsrd.com/medicine/other/64535/assess-perspective-and-knowledge-of-healthcare-providers-towards-elehealth-in-saudi-arabia-a-systematic-review/badriah-mousa-i-mulayhi
The Impact of Digital Media on the Decentralization of Power and the Erosion ...ijtsrd
The impact of digital media on the distribution of power and the weakening of traditional gatekeepers has gained considerable attention in recent years. The adoption of digital technologies and the internet has resulted in declining influence and power for traditional gatekeepers such as publishing houses and news organizations. Simultaneously, digital media has facilitated the emergence of new voices and players in the media industry. Digital medias impact on power decentralization and gatekeeper erosion is visible in several ways. One significant aspect is the democratization of information, which enables anyone with an internet connection to publish and share content globally, leading to citizen journalism and bypassing traditional gatekeepers. Another aspect is the disruption of conventional media industry business models, as traditional organizations struggle to adjust to the decrease in advertising revenue and the rise of digital platforms. Alternative business models, such as subscription models and crowdfunding, have become more prevalent, leading to the emergence of new players. Overall, the impact of digital media on the distribution of power and the weakening of traditional gatekeepers has brought about significant changes in the media landscape and the way information is shared. Further research is required to fully comprehend the implications of these changes and their impact on society. Dr. Kusum Lata "The Impact of Digital Media on the Decentralization of Power and the Erosion of Traditional Gatekeepers" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64544.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/political-science/64544/the-impact-of-digital-media-on-the-decentralization-of-power-and-the-erosion-of-traditional-gatekeepers/dr-kusum-lata
Online Voices, Offline Impact Ambedkars Ideals and Socio Political Inclusion ...ijtsrd
This research investigates the nexus between online discussions on Dr. B.R. Ambedkars ideals and their impact on social inclusion among college students in Gurugram, Haryana. Surveying 240 students from 12 government colleges, findings indicate that 65 actively engage in online discussions, with 80 demonstrating moderate to high awareness of Ambedkars ideals. Statistically significant correlations reveal that higher online engagement correlates with increased awareness p 0.05 and perceived social inclusion. Variations across colleges and a notable effect of college type on perceived social inclusion highlight the influence of contextual factors. Furthermore, the intersectional analysis underscores nuanced differences based on gender, caste, and socio economic status. Dr. Kusum Lata "Online Voices, Offline Impact: Ambedkar's Ideals and Socio-Political Inclusion - A Study of Gurugram District" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64543.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/political-science/64543/online-voices-offline-impact-ambedkars-ideals-and-sociopolitical-inclusion--a-study-of-gurugram-district/dr-kusum-lata
Problems and Challenges of Agro Entreprenurship A Studyijtsrd
Noting calls for contextualizing Agro entrepreneurs problems and challenges of the agro entrepreneurs and for greater attention to the Role of entrepreneurs in agro entrepreneurship research, we conduct a systematic literature review of extent research in agriculture entrepreneurship to overcome the study objectives of complications of agro entrepreneurs through various factors, Development of agriculture products is a key factor for the overall economic growth of agro entrepreneurs Agro Entrepreneurs produces firsthand large scale employment, utilizes the labor and natural resources, This research outlines the problems of Weather and Soil Erosions, Market price fluctuation, stimulates labor cost problems, reduces concentration of Price volatility, Dependency on Intermediaries, induces Limited Bargaining Power, and Storage and Transportation Costs. This paper mainly devoted to highlight Problems and challenges faced for the sustainable of Agro Entrepreneurs in India. Vinay Prasad B "Problems and Challenges of Agro Entreprenurship - A Study" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64540.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64540/problems-and-challenges-of-agro-entreprenurship--a-study/vinay-prasad-b
Comparative Analysis of Total Corporate Disclosure of Selected IT Companies o...ijtsrd
Disclosure is a process through which a business enterprise communicates with external parties. A corporate disclosure is communication of financial and non financial information of the activities of a business enterprise to the interested entities. Corporate disclosure is done through publishing annual reports. So corporate disclosure through annual reports plays a vital role in the life of all the companies and provides valuable information to investors. The basic objectives of corporate disclosure is to give a true and fair view of companies to the parties related either directly or indirectly like owner, government, creditors, shareholders etc. in the companies act, provisions have been made about mandatory and voluntary disclosure. The IT sector in India is rapidly growing, the trend to invest in the IT sector is rising and employment opportunities in IT sectors are also increasing. Therefore the IT sector is expected to have fair, full and adequate disclosure of all information. Unfair and incomplete disclosure may adversely affect the entire economy. A research study on disclosure practices of IT companies could play an important role in this regard. Hence, the present research study has been done to study and review comparative analysis of total corporate disclosure of selected IT companies of India and to put forward overall findings and suggestions with a view to increase disclosure score of these companies. The researcher hopes that the present research study will be helpful to all selected Companies for improving level of corporate disclosure through annual reports as well as the government, creditors, investors, all business organizations and upcoming researcher for comparative analyses of level of corporate disclosure with special reference to selected IT companies. Dr. Vaibhavi D. Thaker "Comparative Analysis of Total Corporate Disclosure of Selected IT Companies of India" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64539.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64539/comparative-analysis-of-total-corporate-disclosure-of-selected-it-companies-of-india/dr-vaibhavi-d-thaker
The Impact of Educational Background and Professional Training on Human Right...ijtsrd
This study investigated the impact of educational background and professional training on human rights awareness among secondary school teachers in the Marathwada region of Maharashtra, India. The key findings reveal that higher levels of education, particularly a master’s degree, and fields of study related to education, humanities, or social sciences are associated with greater human rights awareness among teachers. Additionally, both pre service teacher training and in service professional development programs focused on human rights education significantly enhance teacher’s knowledge, skills, and competencies in promoting human rights principles in their classrooms. Baig Ameer Bee Mirza Abdul Aziz | Dr. Syed Azaz Ali Amjad Ali "The Impact of Educational Background and Professional Training on Human Rights Awareness among Secondary School Teachers" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64529.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/64529/the-impact-of-educational-background-and-professional-training-on-human-rights-awareness-among-secondary-school-teachers/baig-ameer-bee-mirza-abdul-aziz
A Study on the Effective Teaching Learning Process in English Curriculum at t...ijtsrd
“One Language sets you in a corridor for life. Two languages open every door along the way” Frank Smith English as a foreign language or as a second language has been ruling in India since the period of Lord Macaulay. But the question is how much we teach or learn English properly in our culture. Is there any scope to use English as a language rather than a subject How much we learn or teach English without any interference of mother language specially in the classroom teaching learning scenario in West Bengal By considering all these issues the researcher has attempted in this article to focus on the effective teaching learning process comparing to other traditional strategies in the field of English curriculum at the secondary level to investigate whether they fulfill the present teaching learning requirements or not by examining the validity of the present curriculum of English. The purpose of this study is to focus on the effectiveness of the systematic, scientific, sequential and logical transaction of the course between the teachers and the learners in the perspective of the 5Es programme that is engage, explore, explain, extend and evaluate. Sanchali Mondal | Santinath Sarkar "A Study on the Effective Teaching Learning Process in English Curriculum at the Secondary Level of West Bengal" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd62412.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/62412/a-study-on-the-effective-teaching-learning-process-in-english-curriculum-at-the-secondary-level-of-west-bengal/sanchali-mondal
The Role of Mentoring and Its Influence on the Effectiveness of the Teaching ...ijtsrd
This paper reports on a study which was conducted to investigate the role of mentoring and its influence on the effectiveness of the teaching of Physics in secondary schools in the South West Region of Cameroon. The study adopted the convergent parallel mixed methods design, focusing on respondents in secondary schools in the South West Region of Cameroon. Both quantitative and qualitative data were collected, analysed separately, and the results were compared to see if the findings confirm or disconfirm each other. The quantitative analysis found that majority of the respondents 72 of Physics teachers affirmed that they had more experienced colleagues as mentors to help build their confidence, improve their teaching, and help them improve their effectiveness and efficiency in guiding learners’ achievements. Only 28 of the respondents disagreed with these statements. With majority respondents 72 agreeing with the statements, it implies that in most secondary schools, experienced Physics teachers act as mentors to build teachers’ confidence in teaching and improving students’ learning. The interview qualitative data analysis summarized how secondary school Principals use meetings with mentors and mentees to promote mentorship in the school milieu. This has helped strengthen teachers’ classroom practices in secondary schools in the South West Region of Cameroon. With the results confirming each other, the study recommends that mentoring should focus on helping teachers employ social interactions and instructional practices feedback and clarity in teaching that have direct measurable impact on students’ learning achievements. Andrew Ngeim Sumba | Frederick Ebot Ashu | Peter Agborbechem Tambi "The Role of Mentoring and Its Influence on the Effectiveness of the Teaching of Physics in Secondary Schools in the South West Region of Cameroon" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64524.pdf Paper Url: https://www.ijtsrd.com/management/management-development/64524/the-role-of-mentoring-and-its-influence-on-the-effectiveness-of-the-teaching-of-physics-in-secondary-schools-in-the-south-west-region-of-cameroon/andrew-ngeim-sumba
Design Simulation and Hardware Construction of an Arduino Microcontroller Bas...ijtsrd
This study primarily focuses on the design of a high side buck converter using an Arduino microcontroller. The converter is specifically intended for use in DC DC applications, particularly in standalone solar PV systems where the PV output voltage exceeds the load or battery voltage. To evaluate the performance of the converter, simulation experiments are conducted using Proteus Software. These simulations provide insights into the input and output voltages, currents, powers, and efficiency under different state of charge SoC conditions of a 12V,70Ah rechargeable lead acid battery. Additionally, the hardware design of the converter is implemented, and practical data is collected through operation, monitoring, and recording. By comparing the simulation results with the practical results, the efficiency and performance of the designed converter are assessed. The findings indicate that while the buck converter is suitable for practical use in standalone PV systems, its efficiency is compromised due to a lower output current. Chan Myae Aung | Dr. Ei Mon "Design Simulation and Hardware Construction of an Arduino-Microcontroller Based DC-DC High-Side Buck Converter for Standalone PV System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64518.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/64518/design-simulation-and-hardware-construction-of-an-arduinomicrocontroller-based-dcdc-highside-buck-converter-for-standalone-pv-system/chan-myae-aung
Sustainable Energy by Paul A. Adekunte | Matthew N. O. Sadiku | Janet O. Sadikuijtsrd
Energy becomes sustainable if it meets the needs of the present without compromising the ability of future generations to meet their own needs. Some of the definitions of sustainable energy include the considerations of environmental aspects such as greenhouse gas emissions, social, and economic aspects such as energy poverty. Generally far more sustainable than fossil fuel are renewable energy sources such as wind, hydroelectric power, solar, and geothermal energy sources. Worthy of note is that some renewable energy projects, like the clearing of forests to produce biofuels, can cause severe environmental damage. The sustainability of nuclear power which is a low carbon source is highly debated because of concerns about radioactive waste, nuclear proliferation, and accidents. The switching from coal to natural gas has environmental benefits, including a lower climate impact, but could lead to delay in switching to more sustainable options. “Carbon capture and storage” can be built into power plants to remove the carbon dioxide CO2 emissions, but this technology is expensive and has rarely been implemented. Leading non renewable energy sources around the world is fossil fuels, coal, petroleum, and natural gas. Nuclear energy is usually considered another non renewable energy source, although nuclear energy itself is a renewable energy source, but the material used in nuclear power plants is not. The paper addresses the issue of sustainable energy, its attendant benefits to the future generation, and humanity in general. Paul A. Adekunte | Matthew N. O. Sadiku | Janet O. Sadiku "Sustainable Energy" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64534.pdf Paper Url: https://www.ijtsrd.com/engineering/electrical-engineering/64534/sustainable-energy/paul-a-adekunte
Concepts for Sudan Survey Act Implementations Executive Regulations and Stand...ijtsrd
This paper aims to outline the executive regulations, survey standards, and specifications required for the implementation of the Sudan Survey Act, and for regulating and organizing all surveying work activities in Sudan. The act has been discussed for more than 5 years. The Land Survey Act was initiated by the Sudan Survey Authority and all official legislations were headed by the Sudan Ministry of Justice till it was issued in 2022. The paper presents conceptual guidelines to be used for the Survey Act implementation and to regulate the survey work practice, standardizing the field surveys, processing, quality control, procedures, and the processes related to survey work carried out by the stakeholders and relevant authorities in Sudan. The conceptual guidelines are meant to improve the quality and harmonization of geospatial data and to aid decision making processes as well as geospatial information systems. The established comprehensive executive regulations will govern and regulate the implementation of the Sudan Survey Geomatics Act in all surveying and mapping practices undertaken by the Sudan Survey Authority SSA and state local survey departments for public or private sector organizations. The targeted standards and specifications include the reference frame, projection, coordinate systems, and the guidelines and specifications that must be followed in the field of survey work, processes, and mapping products. In the last few decades, there has been a growing awareness of the importance of geomatics activities and measurements on the Earths surface in space and time, together with observing and mapping the changes. In such cases, data must be captured promptly, standardized, and obtained with more accuracy and specified in much detail. The paper will also highlight the current situation in Sudan, the degree to which survey standards are used, the problems encountered, and the errors that arise from not using the standards and survey specifications. Kamal A. A. Sami "Concepts for Sudan Survey Act Implementations - Executive Regulations and Standards" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63484.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/63484/concepts-for-sudan-survey-act-implementations--executive-regulations-and-standards/kamal-a-a-sami
Towards the Implementation of the Sudan Interpolated Geoid Model Khartoum Sta...ijtsrd
The discussions between ellipsoid and geoid have invoked many researchers during the recent decades, especially during the GNSS technology era, which had witnessed a great deal of development but still geoid undulation requires more investigations. To figure out a solution for Sudans local geoid, this research has tried to intake the possibility of determining the geoid model by following two approaches, gravimetric and geometrical geoid model determination, by making use of GNSS leveling benchmarks at Khartoum state. The Benchmarks are well distributed in the study area, in which, the horizontal coordinates and the height above the ellipsoid have been observed by GNSS while orthometric heights were carried out using precise leveling. The Global Geopotential Model GGM represented in EGM2008 has been exploited to figure out the geoid undulation at the benchmarks in the study area. This is followed by a fitting process, that has been done to suit the geoid undulation data which has been computed using GNSS leveling data and geoid undulation inspired by the EGM2008. Two geoid surfaces were created after the fitting process to ensure that they are identical and both of them could be counted for getting the same geoid undulation with an acceptable accuracy. In this respect, statistical operation played an important role in ensuring the consistency and integrity of the model by applying cross validation techniques splitting the data into training and testing datasets for building the geoid model and testing its eligibility. The geometrical solution for geoid undulation computation has been utilized by applying straightforward equations that facilitate the calculation of the geoid undulation directly through applying statistical techniques for the GNSS leveling data of the study area to get the common equation parameters values that could be utilized to calculate geoid undulation of any position in the study area within the claimed accuracy. Both systems were checked and proved eligible to be used within the study area with acceptable accuracy which may contribute to solving the geoid undulation problem in the Khartoum area, and be further generalized to determine the geoid model over the entire country, and this could be considered in the future, for regional and continental geoid model. Ahmed M. A. Mohammed. | Kamal A. A. Sami "Towards the Implementation of the Sudan Interpolated Geoid Model (Khartoum State Case Study)" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63483.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/63483/towards-the-implementation-of-the-sudan-interpolated-geoid-model-khartoum-state-case-study/ahmed-m-a-mohammed
Activating Geospatial Information for Sudans Sustainable Investment Mapijtsrd
Sudan is witnessing an acceleration in the processes of development and transformation in the performance of government institutions to raise the productivity and investment efficiency of the government sector. The development plans and investment opportunities have focused on achieving national goals in various sectors. This paper aims to illuminate the path to the future and provide geospatial data and information to develop the investment climate and environment for all sized businesses, and to bridge the development gap between the Sudan states. The Sudan Survey Authority SSA is the main advisor to the Sudan Government in conducting surveying, mappings, designing, and developing systems related to geospatial data and information. In recent years, SSA made a strategic partnership with the Ministry of Investment to activate Geospatial Information for Sudans Sustainable Investment and in particular, for the preparation and implementation of the Sudan investment map, based on the directives and objectives of the Ministry of Investment MI in Sudan. This paper comes within the framework of activating the efforts of the Ministry of Investment to develop technical investment services by applying techniques adopted by the Ministry and its strategic partners for advancing investment processes in the country. Kamal A. A. Sami "Activating Geospatial Information for Sudan's Sustainable Investment Map" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63482.pdf Paper Url: https://www.ijtsrd.com/engineering/information-technology/63482/activating-geospatial-information-for-sudans-sustainable-investment-map/kamal-a-a-sami
Educational Unity Embracing Diversity for a Stronger Societyijtsrd
In a rapidly changing global landscape, the importance of education as a unifying force cannot be overstated. This paper explores the crucial role of educational unity in fostering a stronger and more inclusive society through the embrace of diversity. By examining the benefits of diverse learning environments, the paper aims to highlight the positive impact on societal strength. The discussion encompasses various dimensions, from curriculum design to classroom dynamics, and emphasizes the need for educational institutions to become catalysts for unity in diversity. It highlights the need for a paradigm shift in educational policies, curricula, and pedagogical approaches to ensure that they are reflective of the diverse fabric of society. This paper also addresses the challenges associated with implementing inclusive educational practices and offers practical strategies for overcoming barriers. It advocates for collaborative efforts between educational institutions, policymakers, and communities to create a supportive ecosystem that promotes diversity and unity. Mr. Amit Adhikari | Madhumita Teli | Gopal Adhikari "Educational Unity: Embracing Diversity for a Stronger Society" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64525.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/64525/educational-unity-embracing-diversity-for-a-stronger-society/mr-amit-adhikari
Integration of Indian Indigenous Knowledge System in Management Prospects and...ijtsrd
The diversity of indigenous knowledge systems in India is vast and can vary significantly between different communities and regions. Preserving and respecting these knowledge systems is crucial for maintaining cultural heritage, promoting sustainable practices, and fostering cross cultural understanding. In this paper, an overview of the prospects and challenges associated with incorporating Indian indigenous knowledge into management is explored. It is found that IIKS helps in management in many areas like sustainable development, tourism, food security, natural resource management, cultural preservation and innovation, etc. However, IIKS integration with management faces some challenges in the form of a lack of documentation, cultural sensitivity, language barriers legal framework, etc. Savita Lathwal "Integration of Indian Indigenous Knowledge System in Management: Prospects and Challenges" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63500.pdf Paper Url: https://www.ijtsrd.com/management/accounting-and-finance/63500/integration-of-indian-indigenous-knowledge-system-in-management-prospects-and-challenges/savita-lathwal
DeepMask Transforming Face Mask Identification for Better Pandemic Control in...ijtsrd
The COVID 19 pandemic has highlighted the crucial need of preventive measures, with widespread use of face masks being a key method for slowing the viruss spread. This research investigates face mask identification using deep learning as a technological solution to be reducing the risk of coronavirus transmission. The proposed method uses state of the art convolutional neural networks CNNs and transfer learning to automatically recognize persons who are not wearing masks in a variety of circumstances. We discuss how this strategy improves public health and safety by providing an efficient manner of enforcing mask wearing standards. The report also discusses the obstacles, ethical concerns, and prospective applications of face mask detection systems in the ongoing fight against the pandemic. Dilip Kumar Sharma | Aaditya Yadav "DeepMask: Transforming Face Mask Identification for Better Pandemic Control in the COVID-19 Era" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64522.pdf Paper Url: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/64522/deepmask-transforming-face-mask-identification-for-better-pandemic-control-in-the-covid19-era/dilip-kumar-sharma
Streamlining Data Collection eCRF Design and Machine Learningijtsrd
Efficient and accurate data collection is paramount in clinical trials, and the design of Electronic Case Report Forms eCRFs plays a pivotal role in streamlining this process. This paper explores the integration of machine learning techniques in the design and implementation of eCRFs to enhance data collection efficiency. We delve into the synergies between eCRF design principles and machine learning algorithms, aiming to optimize data quality, reduce errors, and expedite the overall data collection process. The application of machine learning in eCRF design brings forth innovative approaches to data validation, anomaly detection, and real time adaptability. This paper discusses the benefits, challenges, and future prospects of leveraging machine learning in eCRF design for streamlined and advanced data collection in clinical trials. Dhanalakshmi D | Vijaya Lakshmi Kannareddy "Streamlining Data Collection: eCRF Design and Machine Learning" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63515.pdf Paper Url: https://www.ijtsrd.com/biological-science/biotechnology/63515/streamlining-data-collection-ecrf-design-and-machine-learning/dhanalakshmi-d
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Francesca Gottschalk - How can education support child empowerment.pptxEduSkills OECD
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
2. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD29628 | Volume – 4 | Issue – 1 | November-December 2019 Page 479
OBJECTIVES
To evaluate the effectiveness of the use of CFRP laminates as
external reinforcement to reinforced concrete frames Beam
section subjected to stress and Deformation.
METHODOLOGY
In the present thesis, an analytical work has been
carried out on the beam section sized 220mm x 300mm
with effective length 3.5m, to evaluate the performance
of a concrete beam model which is reinforced CFRP
materials.
The CFRP materials using in this study with different
thicknesses 3mm and 6mm.
The analytical concrete beam model was generated
using a finite-element software program ANSYS 14.5.
In ANSYS software concrete beam which is subjected to
loading through UDL loading. Vertical load was applied
150 KN/m for better computational accuracy.
Analysis has been carried out to investigate the
response of concrete beam system with respect to
deflection, stress and strain.
ANSYS
ANSYS is a far reaching broadly useful limited
component PC program that contains more than
100,000 lines of code. ANSYS isequippedforperforming
static, dynamic, heat exchange, liquid stream and
electromagnetism examination. ANSYS has been a main
FEA program for well more than 20 years. The present
form of ANSYS has a totally new look, with different
window consolidating Graphical User Interface (GUI).
Draw down menus, discourse boxes and apparatus bar.
Today we will discover ANSYS being used in many
designing fields, including aviation, car gadgets and
atomic. ANSYS is exceptionally ground-breaking and
amazing building apparatus that might be utilized to
tackle an assortment of issues. Be that as it may, A client
without an essential comprehension of the limited
component techniques will get oneself in
indistinguishable pickle from a PC instructing with
access to numerous noteworthy instruments and
devices, however who can't fix a PC since he and she
doesn't comprehend the inward working of a PC.
Results
Deflection, Stress & Strain Contour Plots for CFRP
Fig.5.1 CFRP 3mm Deflection Results
Fig. 5.2 CFRP 6mm Deflection Results
3. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD29628 | Volume – 4 | Issue – 1 | November-December 2019 Page 480
Fig. 5.3 CFRP 3mm Stress Results
Fig. 5.4 CFRP 6mm Stress Results
Fig. 5.5 CFRP 3mm Strain Results
4. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD29628 | Volume – 4 | Issue – 1 | November-December 2019 Page 481
Fig. 5.6 CFRP 6mm Strain Results
Fig. 5.7 Stress Response for CFRP
Fig. 5.8 Stress Response for CFRP using Bar Chart
5. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD29628 | Volume – 4 | Issue – 1 | November-December 2019 Page 482
Fig. 5.9 Strain Response for CFRP
Fig. 5.10 Strain Response for CFRP using Bar Chart
Conclusions
Investigate the response of concrete beam system with respect to deflection, stress and strain.
CFRP provided more strength to the structure Beam and effective than Without CFRP concrete material in reduction of
deformation and stresses.
REFERENCES
[1] Al-Salloum, Y. A., Alsayed, S. H., Almusallam, T. H., and
N. A. Siddiqui. (2007). "Seismic Rehabilitation of Shear
Deficient Interior Beam-Column Joints Using FRP
Sheets." Accepted for Presentation in the 7th Saudi
Engineering Conference (SEC7), 26-28 November,
Riyadh, Saudi Arabia.
[2] Battula Sudheer Kumar and Rajalapati, “Tensile
Properties of Long Jute Fiber Reinforced Polypro-
pylene Composites” ,International Journal of Engi-
neering Inventions,vol.3, pp.45-56, 2012.
[3] Büyükkaragöz, A. (2010). “Finite Element Analysis of
the Beam Strengthened with Prefabricated Reinforced
Concrete Plate,” Scientific Research and Essays, V. 5.
No. 6, pp. 533-544.
[4] Hayder Alaa Hasan, M. Neaz Sheikh, Muhammad N.S.
Hadi (2017). “Performance evaluation of highstrength
concrete and steel fibre high strength concrete
columns reinforced with GFRP bars and helices,”
Construction and Building Materials 134 (2017) 297–
310.
[5] ILki, Alper., Bedirhangolu, Idris., and Kumbasa, Nadir.,
(2011). “Behaviour of FRP-Retrofitted JointsBuiltwith
Plain Bars and Low Strength Concrete.” Journal of
Composite Construction, ASCE, vol.15, No 3, pp 312-
326.
[6] Li, Bing., and Qi, Qiang. (2011). “Seismic Behaviour of
the Reinforced Concrete Interior Beam-Wide Column
Joints Repaired using FRP.” Journals of Composites for
Construction, ASCE, May-June, vol 15, No 3, , pp 327-
338.
[7] M. Moradi, M. Reza Esfahani (2017).“Applicationofthe
strut-and-tie method forsteel fiberreinforcedconcrete
deep beams,” Construction and Building Materials131
(2017) 423–437.
[8] M. A. Al-Osta, M. N. Isa, M. H. Baluch, M. K. Rahman
(2017). “Flexural behavior of reinforced concrete
beams strengthened with ultra-highperformancefiber
reinforced concrete,” Construction and Building
Materials 134 (2017) 279–296.
[9] Mahmood, M. N. andMahmood,A.Sh.(2011)“Torsional
behaviour of prestressed concrete beam strengthened
with CFRP sheets” 16th International Conference on
Composite Structures, ICCS 16.