STNC Catalog
Tự Động Hóa Đà Nẵng chuyên cung cấp và phân phối thiết bị khí nén, thiết bị thủy lực, thiết bị tự động hóa.
Đặt hàng và tư vấn: 0918.434.694
In order to deliver the energy required to light high intensity lights, lamps, and beacons, a careful selection of wire and cable is required The electrical wire delivering the charge to this system and its connection to the lamp play a vital role and work in harmony with each other to ensure circuit integrity and lights always illuminated. Many electrical wire and cable considerations include: Voltage rating, temperature rating, shielding, oil and moisture resistance, Standards Agency Requirements, armor requirements, routing considerations, UV resistance etc. lengths of cable, cable weight and finished diameter, voltage drop, etc.
Sound cable design considerations, and the
use of high quality state of the art
insulating materials, coupled with solid
American Craftsmanship greatly positively
influence the cables performance.
Thermal Wire has had great success with
the following 3 cable types:
Hybrid
Retractable systems
Stationary Shielded Power and Control Cables
this catalogue includes pneumatic fittings made of plastic, brass, stainless steel, air hose, quick coupling, air gun, pneumatic muffler, coolant tubes, air tool kits
Well Testing Surface safety Valve (SSV), Well Test Valves - WOM Groupwomgroup
WOM offers Well Testing Surface safety Valve (SSV) with hydraulic, pneumatic actuator & crossovers with union or hub end connections for easy connections on field.
The document provides information about air compressor ZR Atlas Copco, including its main parts, technical specifications, systems, maintenance strategy, and a maintenance case study. It introduces the compressor, describing its filter, elements, motor, and controls. Diagrams show the cooling, oil, and air systems. The maintenance strategy outlines inspection levels based on running hours, including tasks like checking for leaks and replacing filters. The case study describes experiences maintaining a similar compressor, such as replacing worn elements, filters, and other parts.
Este documento proporciona instrucciones para la operación de un horno de mufla. Explica cómo desempacar e inspeccionar el horno, instalarlo y conectarlo correctamente. También describe cómo cargar la cámara del horno de manera uniforme y espaciada para evitar daños. Detalla los controles digitales y cómo programar el horno para operar a una sola temperatura o en rampas de temperatura con tiempos programados para cada una.
This document discusses mechanical seals which are used to prevent leakage in pumps and other equipment. It describes the need for seals to minimize leakage and prevent toxic fluids from escaping. Both static seals, used between non-moving parts, and dynamic seals, used between moving parts, are covered. Common static seals include gaskets and O-rings, while dynamic seals include gland packings and mechanical contact seals. The document focuses on mechanical seals, explaining their design features such as seal faces, springs, and secondary seals. Different types are classified including single versus multiple spring seals, pusher versus non-pusher seals, and single versus double/tandem arrangements. Materials of construction and operating principles are also summarized.
Este documento presenta una lista de equipos de soldadura y corte fabricados por Infra para trabajos pesados y extra pesados. Incluye reguladores, manerales, aditamentos y sopletes para corte con diferentes capacidades y conexiones, ideales para industrias como azucareras, siderúrgicas y ensambladoras que requieren equipos resistentes.
In order to deliver the energy required to light high intensity lights, lamps, and beacons, a careful selection of wire and cable is required The electrical wire delivering the charge to this system and its connection to the lamp play a vital role and work in harmony with each other to ensure circuit integrity and lights always illuminated. Many electrical wire and cable considerations include: Voltage rating, temperature rating, shielding, oil and moisture resistance, Standards Agency Requirements, armor requirements, routing considerations, UV resistance etc. lengths of cable, cable weight and finished diameter, voltage drop, etc.
Sound cable design considerations, and the
use of high quality state of the art
insulating materials, coupled with solid
American Craftsmanship greatly positively
influence the cables performance.
Thermal Wire has had great success with
the following 3 cable types:
Hybrid
Retractable systems
Stationary Shielded Power and Control Cables
this catalogue includes pneumatic fittings made of plastic, brass, stainless steel, air hose, quick coupling, air gun, pneumatic muffler, coolant tubes, air tool kits
Well Testing Surface safety Valve (SSV), Well Test Valves - WOM Groupwomgroup
WOM offers Well Testing Surface safety Valve (SSV) with hydraulic, pneumatic actuator & crossovers with union or hub end connections for easy connections on field.
The document provides information about air compressor ZR Atlas Copco, including its main parts, technical specifications, systems, maintenance strategy, and a maintenance case study. It introduces the compressor, describing its filter, elements, motor, and controls. Diagrams show the cooling, oil, and air systems. The maintenance strategy outlines inspection levels based on running hours, including tasks like checking for leaks and replacing filters. The case study describes experiences maintaining a similar compressor, such as replacing worn elements, filters, and other parts.
Este documento proporciona instrucciones para la operación de un horno de mufla. Explica cómo desempacar e inspeccionar el horno, instalarlo y conectarlo correctamente. También describe cómo cargar la cámara del horno de manera uniforme y espaciada para evitar daños. Detalla los controles digitales y cómo programar el horno para operar a una sola temperatura o en rampas de temperatura con tiempos programados para cada una.
This document discusses mechanical seals which are used to prevent leakage in pumps and other equipment. It describes the need for seals to minimize leakage and prevent toxic fluids from escaping. Both static seals, used between non-moving parts, and dynamic seals, used between moving parts, are covered. Common static seals include gaskets and O-rings, while dynamic seals include gland packings and mechanical contact seals. The document focuses on mechanical seals, explaining their design features such as seal faces, springs, and secondary seals. Different types are classified including single versus multiple spring seals, pusher versus non-pusher seals, and single versus double/tandem arrangements. Materials of construction and operating principles are also summarized.
Este documento presenta una lista de equipos de soldadura y corte fabricados por Infra para trabajos pesados y extra pesados. Incluye reguladores, manerales, aditamentos y sopletes para corte con diferentes capacidades y conexiones, ideales para industrias como azucareras, siderúrgicas y ensambladoras que requieren equipos resistentes.
Hyster f005 (h4.00 xl 6) forklift service repair manualufjjsjefkskekmme
The document provides instructions for repairing the speed reducer and differential assembly of a lift truck. It includes descriptions of the components, removal and disassembly steps, cleaning and inspection guidelines, and assembly procedures. Some key points:
- The speed reducer and differential are housed together, with the speed reducer transferring power between the transmission and differential gears.
- To repair, the entire drive axle assembly is removed from the lift truck as a unit. It is then disassembled by removing components like the axle shafts, speed reducer housing, and pinion/ring gear assembly.
- Parts are cleaned and inspected for wear or damage before assembly. Clearances must be checked or adjusted depending on whether original parts
Connector and Tubing Technical Guide – Parker Hannifin Instrumentation Products Division North America and Europe. Covers
Download here - http://www.parker.com/literature/Instrumentation%20Products%20Division%20Europe/CTS%20TECH%20GUIDE%20BOOK.pdf
ndex
A-LOK
®
Principle
2
CPI™ Principle
3
Assembly instructions
for A-LOK
®
/CPI™
4-5
How to identify metric fittings
5
Gaugeability instructions
for A-LOK
®
/CPI™
6
Tube insertion and bend allowance
length for A-LOK
®
/CPI™
7
PHastite
®
Principle/Benefits
8-9
Assembly instructions
for PHastite
®
10-11
Tube Markers
12-13
MPI™ Principle
14
Assembly instructions for MPI™
15-16
Gauging
16
Suparcase
®
17
Connector raw material table
18-19
Heat Code traceability
20
Parker grade tubing overview
21-23
Parker tubing Part no’s.
23-24
Tube selection and pressure tables
25-42
Tubing vs Piping
43-44
Common cause of
imperfect bends
45
Routing of tubing bends
45-47
Tubing preparation
48-49
Tubing fabrication equipment
50-53
Visual index A-LOK
®
/CPI™
54-61
Visual index PHastite
®
62-63
Visual index MPI™
64-68
A-LOK
®
and CPI™ connector
selection pages
69-119
PHastite
®
connector selection
pages
120-129
MPI™ connector selection pages
130-143
WARNING user responsibility. Failure of improper selection or improper use of the products described herein or related items can cause death personal injury and property damage.
.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or systems options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
Parker’s product selection guide CD contains electronic versions of all catalogs referenced in the product selection guide document as well as additional Parker
Instrumentation product lines.
Este documento proporciona información sobre diferentes tipos de conexiones hidráulicas, incluidas roscas japonesas, americanas, métricas alemanas y francesas. Explica las características de cada conexión, como los diámetros interiores y exteriores, el paso de rosca y cómo funciona el sellado. También incluye tablas detalladas con las especificaciones técnicas de cada tipo de conexión para facilitar su identificación.
This document verifies that Marie Athey conducted an OSHA 30 Hour Outreach Training Program for Construction on March 19, 2015 for Erin Machajewski. It states that Marie Athey is an authorized OSHA trainer and will document the training class and provide Erin Machajewski with a completion card within 90 days as required by the OSHA Outreach Training Program.
Este documento proporciona información sobre diferentes tipos de cables de acero, incluyendo sus especificaciones técnicas como diámetro, peso, carga de rotura mínima y composición. Se enumeran los códigos y características de cables galvanizados y negros para su uso en ascensores, grúas y otros equipos. Además, se incluyen instrucciones sobre el enrollado adecuado de los cables en tambores.
Company Profile :
Micro Seal is one of the leading Designers & Suppliers of world-class Mechanical Seals, Seal Support system for Pumps, Compressors,Agitators, Mixers and Reactors.
We are implementing ISO 9001:2008 Quality Management Standard & manufacture mechanical seal according to international Quality and safety standards with same design and fitting.(EN 12756-DIN24960,API-682, and ISO 3069.)
We have computer aided design facility for designing and developing mechanical seal to meet and fulfill customer requirements.
Our Product :
We offer a complete line of Mechanical seals including cartridge seals, dry-running seals, metal bellow seals, elastomer bellows Seal, Teflon bellows Seal, conical spring seal, , agitator seal, cartridge seal for diverse application in a wide range of industries.
We Manufacture Mechanical Seals as per our own design as well as equivalent to reputed international brand like John Crane, Sealol, Durametallic, eagle Burgmann,, Flowserve, AES, US Seal, Roten etc. as per sample or drawing.
Mission and Vision :
We tend to work in close co-ordination with our clients to offer unique fluid handling solutions.
We aim to fulfill our commitment of providing superior quality products to our clients at the optimum cost.
Our Team :
Our team comprises of qualified and experienced professionals, who continuously work for the development of the company.
Infrastructure :
Our State-of-the-art infrastructure is located in the industrial hub of Mumbai. we have well equipped insfrastructure with modern machineries and equipment for manufacturing and testing facilities.
High pressure water cleaner- Pressure Jet Systemaman1312
This document provides information about a high pressure cleaner system from PressureJet, including:
- The model is a PJS 70150 pump with 150 bar pressure and 70 LPM flow rate.
- It lists the basic USPs and features of PressureJet systems, such as rigorous 500-hour testing, over 257 quality checking instruments, use of 3D design software, and more.
- Details of the system are given, including dimensions and specifications of the PJS 70150 pump model. Accessories included in different packages are outlined along with prices.
- Additional information is provided on nozzles, unloader valves, safety valves, pressure gauges, and other accessories. Terms and conditions for
The document discusses oxidation blowers used in flue gas desulfurization (FGD) systems for thermal power plants. It provides details on:
1) The purpose of oxidation blowers is to provide sufficient oxidation air flow and distribution to convert sulfite to sulfate during the FGD process, which helps achieve the desired gypsum purity.
2) Each FGD absorber unit requires one working and one standby oxidation blower. Common types include single-stage centrifugal or positive displacement blowers.
3) BHEL supplies oxidation blowers meeting requirements like air flow rate and pressure for various FGD projects in India. Key components and performance testing are described.
Este documento proporciona información sobre diferentes tipos de aceros, incluyendo sus designaciones, composiciones químicas, normas, campos de aplicación, propiedades mecánicas y tratamientos térmicos. Describe aceros al carbono, de aleación, para rodamientos, muelles y cementación, con detalles sobre más de 20 variedades diferentes.
This document discusses pressure relief systems. It begins by defining pressure relief events and overpressure hazards. It then outlines potential lines of defense like inherently safe design, passive control, and installing relief systems. The document goes on to define relief systems and explain why they are used. It provides terminology and code requirements related to relief systems. The bulk of the document is focused on the methodology for designing relief systems, including locating reliefs, choosing device types, developing scenarios, sizing reliefs through calculations, choosing a worst case, and designing the full relief system. It emphasizes the importance of proper installation, inspection, and maintenance of relief systems.
Este manual técnico contiene información sobre el motor y los componentes relacionados de los vehículos Renault Clio II fase 2 con motor 1.6 16V 'K4M', incluyendo descripciones e instrucciones para la identificación, extracción y mantenimiento del conjunto motor-caja de velocidades, componentes del motor como la correa de distribución, el sistema de refrigeración, inyección de combustible, encendido y más. También proporciona detalles sobre pares de apriete y herramientas especializadas requeridas.
The document discusses design requirements for a vessel according to ASME VIII Div. 1. It provides information on the applicable sections of the code for design. The main design topics covered include requirements for internal pressure design of shells and heads, external pressure on shells, nozzle compensation, and nozzle weld sizing. The document then gives an example calculation for minimum shell thickness according to the code's internal pressure equations in section UG-27.
Raychem Saudi Arabia Ltd|AKBAR TRADING EST. SAUDI ARABIA| Lv joints TYCO- RA...AKBAR TRADING
Raychem heat-shrinkable joints
for screened plastic and rubber
insulated cables up to 36 kV
Raychem heat-shrinkable joints for screened plastic and rubber insulated cables
up to 36 kV
Tyco Electronics
For jointing plastic insulated cables for
up to 36 kV we offer a system based
on head-shrinkable materials which are
fast and simple to install, eliminates
shelf-life limitations even in severe
climates and permits immediate
back-filling of the trench and
re-energize.
ชุด การเลิกจ้าง
This document provides information on instrumentation symbols and identification based on ANSI/ISA-5.1-2009 standards. It includes:
1) Common control valve, actuator, and instrument symbols used in process and instrumentation diagrams along with brief descriptions.
2) Guidelines for assigning tag numbers and abbreviations to identify process variables, locations, and loop identifiers for instruments.
3) Examples of standard tag number prefixes and abbreviations used in oil and gas applications to indicate instrument types and functions.
This document provides information on the electrical power systems of the A300/A310 aircraft. It describes the integrated drive generators (IDGs), generator control units (GCUs), and electrical distribution networks. The networks include alternating current (AC) and direct current (DC) buses that distribute power from the generators and other power sources. Transfer circuitry and external power receptacles are also discussed for supplying the electrical networks.
Accumulation and Over-pressure: difference between accumulation and overpressureVarun Patel
Accumulation is pressure above the maximum allowable working pressure that vessel experience during high pressure event. Hence, when we say ‘accumulation’, its mean we are talking about the vessel or equipment.
On the other hand, Overpressure is pressure above the set pressure of the pressure safety valve that PSV experience during high pressure event. Hence, when we say ‘accumulation’, its mean we are talking about the pressure relief valve.
El mármol es una roca metamórfica formada a partir de rocas calizas sometidas a altas temperaturas y presiones, que se utiliza principalmente en la construcción, decoración y escultura. Puede provenir de rocas eruptivas o sedimentarias y existe en variedades como mármol macael, mármol negro y mármol blanco.
Hyster f005 (h4.00 xl 6) forklift service repair manualufjjsjefkskekmme
The document provides instructions for repairing the speed reducer and differential assembly of a lift truck. It includes descriptions of the components, removal and disassembly steps, cleaning and inspection guidelines, and assembly procedures. Some key points:
- The speed reducer and differential are housed together, with the speed reducer transferring power between the transmission and differential gears.
- To repair, the entire drive axle assembly is removed from the lift truck as a unit. It is then disassembled by removing components like the axle shafts, speed reducer housing, and pinion/ring gear assembly.
- Parts are cleaned and inspected for wear or damage before assembly. Clearances must be checked or adjusted depending on whether original parts
Connector and Tubing Technical Guide – Parker Hannifin Instrumentation Products Division North America and Europe. Covers
Download here - http://www.parker.com/literature/Instrumentation%20Products%20Division%20Europe/CTS%20TECH%20GUIDE%20BOOK.pdf
ndex
A-LOK
®
Principle
2
CPI™ Principle
3
Assembly instructions
for A-LOK
®
/CPI™
4-5
How to identify metric fittings
5
Gaugeability instructions
for A-LOK
®
/CPI™
6
Tube insertion and bend allowance
length for A-LOK
®
/CPI™
7
PHastite
®
Principle/Benefits
8-9
Assembly instructions
for PHastite
®
10-11
Tube Markers
12-13
MPI™ Principle
14
Assembly instructions for MPI™
15-16
Gauging
16
Suparcase
®
17
Connector raw material table
18-19
Heat Code traceability
20
Parker grade tubing overview
21-23
Parker tubing Part no’s.
23-24
Tube selection and pressure tables
25-42
Tubing vs Piping
43-44
Common cause of
imperfect bends
45
Routing of tubing bends
45-47
Tubing preparation
48-49
Tubing fabrication equipment
50-53
Visual index A-LOK
®
/CPI™
54-61
Visual index PHastite
®
62-63
Visual index MPI™
64-68
A-LOK
®
and CPI™ connector
selection pages
69-119
PHastite
®
connector selection
pages
120-129
MPI™ connector selection pages
130-143
WARNING user responsibility. Failure of improper selection or improper use of the products described herein or related items can cause death personal injury and property damage.
.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or systems options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
Parker’s product selection guide CD contains electronic versions of all catalogs referenced in the product selection guide document as well as additional Parker
Instrumentation product lines.
Este documento proporciona información sobre diferentes tipos de conexiones hidráulicas, incluidas roscas japonesas, americanas, métricas alemanas y francesas. Explica las características de cada conexión, como los diámetros interiores y exteriores, el paso de rosca y cómo funciona el sellado. También incluye tablas detalladas con las especificaciones técnicas de cada tipo de conexión para facilitar su identificación.
This document verifies that Marie Athey conducted an OSHA 30 Hour Outreach Training Program for Construction on March 19, 2015 for Erin Machajewski. It states that Marie Athey is an authorized OSHA trainer and will document the training class and provide Erin Machajewski with a completion card within 90 days as required by the OSHA Outreach Training Program.
Este documento proporciona información sobre diferentes tipos de cables de acero, incluyendo sus especificaciones técnicas como diámetro, peso, carga de rotura mínima y composición. Se enumeran los códigos y características de cables galvanizados y negros para su uso en ascensores, grúas y otros equipos. Además, se incluyen instrucciones sobre el enrollado adecuado de los cables en tambores.
Company Profile :
Micro Seal is one of the leading Designers & Suppliers of world-class Mechanical Seals, Seal Support system for Pumps, Compressors,Agitators, Mixers and Reactors.
We are implementing ISO 9001:2008 Quality Management Standard & manufacture mechanical seal according to international Quality and safety standards with same design and fitting.(EN 12756-DIN24960,API-682, and ISO 3069.)
We have computer aided design facility for designing and developing mechanical seal to meet and fulfill customer requirements.
Our Product :
We offer a complete line of Mechanical seals including cartridge seals, dry-running seals, metal bellow seals, elastomer bellows Seal, Teflon bellows Seal, conical spring seal, , agitator seal, cartridge seal for diverse application in a wide range of industries.
We Manufacture Mechanical Seals as per our own design as well as equivalent to reputed international brand like John Crane, Sealol, Durametallic, eagle Burgmann,, Flowserve, AES, US Seal, Roten etc. as per sample or drawing.
Mission and Vision :
We tend to work in close co-ordination with our clients to offer unique fluid handling solutions.
We aim to fulfill our commitment of providing superior quality products to our clients at the optimum cost.
Our Team :
Our team comprises of qualified and experienced professionals, who continuously work for the development of the company.
Infrastructure :
Our State-of-the-art infrastructure is located in the industrial hub of Mumbai. we have well equipped insfrastructure with modern machineries and equipment for manufacturing and testing facilities.
High pressure water cleaner- Pressure Jet Systemaman1312
This document provides information about a high pressure cleaner system from PressureJet, including:
- The model is a PJS 70150 pump with 150 bar pressure and 70 LPM flow rate.
- It lists the basic USPs and features of PressureJet systems, such as rigorous 500-hour testing, over 257 quality checking instruments, use of 3D design software, and more.
- Details of the system are given, including dimensions and specifications of the PJS 70150 pump model. Accessories included in different packages are outlined along with prices.
- Additional information is provided on nozzles, unloader valves, safety valves, pressure gauges, and other accessories. Terms and conditions for
The document discusses oxidation blowers used in flue gas desulfurization (FGD) systems for thermal power plants. It provides details on:
1) The purpose of oxidation blowers is to provide sufficient oxidation air flow and distribution to convert sulfite to sulfate during the FGD process, which helps achieve the desired gypsum purity.
2) Each FGD absorber unit requires one working and one standby oxidation blower. Common types include single-stage centrifugal or positive displacement blowers.
3) BHEL supplies oxidation blowers meeting requirements like air flow rate and pressure for various FGD projects in India. Key components and performance testing are described.
Este documento proporciona información sobre diferentes tipos de aceros, incluyendo sus designaciones, composiciones químicas, normas, campos de aplicación, propiedades mecánicas y tratamientos térmicos. Describe aceros al carbono, de aleación, para rodamientos, muelles y cementación, con detalles sobre más de 20 variedades diferentes.
This document discusses pressure relief systems. It begins by defining pressure relief events and overpressure hazards. It then outlines potential lines of defense like inherently safe design, passive control, and installing relief systems. The document goes on to define relief systems and explain why they are used. It provides terminology and code requirements related to relief systems. The bulk of the document is focused on the methodology for designing relief systems, including locating reliefs, choosing device types, developing scenarios, sizing reliefs through calculations, choosing a worst case, and designing the full relief system. It emphasizes the importance of proper installation, inspection, and maintenance of relief systems.
Este manual técnico contiene información sobre el motor y los componentes relacionados de los vehículos Renault Clio II fase 2 con motor 1.6 16V 'K4M', incluyendo descripciones e instrucciones para la identificación, extracción y mantenimiento del conjunto motor-caja de velocidades, componentes del motor como la correa de distribución, el sistema de refrigeración, inyección de combustible, encendido y más. También proporciona detalles sobre pares de apriete y herramientas especializadas requeridas.
The document discusses design requirements for a vessel according to ASME VIII Div. 1. It provides information on the applicable sections of the code for design. The main design topics covered include requirements for internal pressure design of shells and heads, external pressure on shells, nozzle compensation, and nozzle weld sizing. The document then gives an example calculation for minimum shell thickness according to the code's internal pressure equations in section UG-27.
Raychem Saudi Arabia Ltd|AKBAR TRADING EST. SAUDI ARABIA| Lv joints TYCO- RA...AKBAR TRADING
Raychem heat-shrinkable joints
for screened plastic and rubber
insulated cables up to 36 kV
Raychem heat-shrinkable joints for screened plastic and rubber insulated cables
up to 36 kV
Tyco Electronics
For jointing plastic insulated cables for
up to 36 kV we offer a system based
on head-shrinkable materials which are
fast and simple to install, eliminates
shelf-life limitations even in severe
climates and permits immediate
back-filling of the trench and
re-energize.
ชุด การเลิกจ้าง
This document provides information on instrumentation symbols and identification based on ANSI/ISA-5.1-2009 standards. It includes:
1) Common control valve, actuator, and instrument symbols used in process and instrumentation diagrams along with brief descriptions.
2) Guidelines for assigning tag numbers and abbreviations to identify process variables, locations, and loop identifiers for instruments.
3) Examples of standard tag number prefixes and abbreviations used in oil and gas applications to indicate instrument types and functions.
This document provides information on the electrical power systems of the A300/A310 aircraft. It describes the integrated drive generators (IDGs), generator control units (GCUs), and electrical distribution networks. The networks include alternating current (AC) and direct current (DC) buses that distribute power from the generators and other power sources. Transfer circuitry and external power receptacles are also discussed for supplying the electrical networks.
Accumulation and Over-pressure: difference between accumulation and overpressureVarun Patel
Accumulation is pressure above the maximum allowable working pressure that vessel experience during high pressure event. Hence, when we say ‘accumulation’, its mean we are talking about the vessel or equipment.
On the other hand, Overpressure is pressure above the set pressure of the pressure safety valve that PSV experience during high pressure event. Hence, when we say ‘accumulation’, its mean we are talking about the pressure relief valve.
El mármol es una roca metamórfica formada a partir de rocas calizas sometidas a altas temperaturas y presiones, que se utiliza principalmente en la construcción, decoración y escultura. Puede provenir de rocas eruptivas o sedimentarias y existe en variedades como mármol macael, mármol negro y mármol blanco.
This document summarizes the results of a questionnaire given to gather information for a documentary. It includes questions about the respondents' age, gender, experiences with dress code and makeup requirements in the workplace, opinions on requiring makeup in the workplace, experiences feeling pressure to look a certain way, and feelings of need to look a certain way in college. The summaries provided for each question analyze the results and how they will contribute to the documentary, which is about pressures of beauty.
Cheryl Birdsong is seeking a position as an administrative assistant with over 20 years of experience. She has extensive experience in accounts payable, accounts receivable, payroll, and expense reporting. Birdsong holds a Bachelor's degree in Business Management and has worked for both large and small companies in a variety of roles supporting finance, operations, and executive teams. She prides herself on being a hard worker with strong attention to detail and problem-solving skills.
This document outlines Sweden's Olympic collection for the 2016 Rio games, including general apparel, training and casual wear, track and field uniforms, replica uniforms for training and kids football, and uniforms for the opening ceremony.
Este documento introduce las bases de datos y proporciona detalles sobre tablas, registros, campos y tipos de datos soportados por MySQL como enteros, flotantes, fechas, cadenas y enumeraciones. También explica comandos básicos como CREATE, ALTER, SHOW, DESCRIBE y UPDATE.
Eide fabrica frenos y embragues industriales para torres eólicas, generadores eólicos y máquinas de envasado. Para torres eólicas ofrece frenos centrífugos y paracaídas que permiten un descenso controlado de ascensores. También diseña frenos neumáticos para generadores eólicos que frenan grandes masas de forma rápida y segura. Para máquinas de envasado, proporciona varios tipos de embragues electromagnéticos y neumáticos que permiten controlar la
Emotional Intelligence, Psychological Well-Being and Self-Esteem among Hearin...inventionjournals
The aim of this paper was to examine the relationship between emotional intelligence, psychological well-being and self-esteem among hearing-impaired students. Data from 36 hearing-impaired students were collected using simple random sampling at the Federation Special Education National Secondary School Penang, Malaysia. The Bar-On Emotional Quotient: Short (EQ-i: S) instrument, Ryff‘s psychological well-being and the Rosenberg Self-Esteem Scale were utilised to examine emotional intelligence, psychological well-being and self-esteem. Dimensions of emotional intelligence consist of intrapersonal, interpersonal, adaptability, stress management, and general mood while psychological well-being dimensions consist of selfacceptance, positive relations with others, autonomy, environmental mastery, purpose in life and personal growth. Results indicated a moderate level of emotional intelligence, psychological well-being and self-esteem. Significant positive correlations were found between self-esteem and overall emotional intelligence, overall psychological well-being, emotional intelligence dimensions (intrapersonal, interpersonal, adaptability, stress management, and general mood) and psychological well-being dimensions (autonomy and environmental mastery). No significant correlation was found between the four dimensions of psychological well-being namely self-acceptance, positive relations with others, environmental mastery and personal growth. The findings of this study will enable the education authority to direct their special students in a way that best suits the institution and students goals.
Este documento lista y brinda una breve descripción de varias páginas web para estudiar inglés. Algunas de las páginas destacadas incluyen mansioningles.com, que ofrece recursos para aprender, mantener o mejorar el inglés, livemocha.com que combina redes sociales con aprendizaje de idiomas, y rworld.com donde los usuarios pueden practicar habilidades lingüísticas a través de actividades interactivas.
Taller #1 institucion educativa las margaritasBoris Salleg
La institución educativa Las Margaritas fue creada en 1998 con el objetivo de impartir educación de alta calidad basada en valores éticos y morales. Sus valores institucionales incluyen la autonomía, el respeto, la honradez, el ingenio, la responsabilidad y el sentido de pertenencia. Su filosofía busca formar individuos aptos para la convivencia social mediante el pensamiento crítico. Su misión es formar personas con un desarrollo completo que cumplan un papel significativo en la sociedad.
1) El Nuevo Testamento contiene numerosas expresiones semíticas transliteradas del hebreo y arameo, como nombres propios y comunes, adverbios e interjecciones. 2) Estos semitismos reflejan la influencia de la Septuaginta, la traducción griega del Antiguo Testamento. 3) Palabras como "gehena" y expresiones como "hijos de" muestran influencias literarias hebreas en el estilo y vocabulario del Nuevo Testamento.
El modelo de eventos se basa en que los objetos que generan eventos (eventsources) registran los objetos que deben manejarlos (eventlisteners). Los listeners necesitan implementar métodos de interfaces como Listener que corresponden a los tipos de eventos. Para crear una aplicación orientada a eventos con interfaz gráfica de usuario hay que saber los componentes de la interfaz, crear una clase para la aplicación y ventana, añadir componentes a la ventana, definir listeners para los eventos y implementar los métodos de las interfaces Listener.
Specialising in Pneumatic Mining and Plant EquipmentPaul Neuman
http://www.pneumax.co.za/home/products | Pneumax provides specialised Pneumatic Mining and Plant Equipment. This includes mechanical valves, valve terminals, solenoid valves, air service units, cylinders, manipulation products and more. Pneumax is also a leading supplier of Imperial Mine Cylinders and Rail Change Cylinder Devices to mines in Africa. Since 1976 Pneumax has supplied the pneumatic and automation industry with quality components.
The document is a catalogue from IAT Industry Limited that lists various types of tire valves and accessories. It provides detailed information on over 30 different products, including snap-in and clamp-in tubeless valves for passenger cars and trucks in various sizes, as well as air-liquid valves, large bore valves for off-road vehicles, and accessories like tire repair tools, gauges, and wheel weights. IAT Industry Limited manufactures and markets these products for applications like bikes, trucks, light vehicles, and other equipment.
This document describes an airline accessories catalog featuring the ARO-Flo series of air preparation products, including filters, regulators, lubricators, and other accessories. The ARO-Flo series provides clean, regulated air for pneumatic tools through high-performing, modular components. Key features include superior air flow, easy assembly/disassembly, and integrated safety components. The catalog provides product specifications and ordering information for the various ARO-Flo filter, regulator, lubricator, and accessory options.
This document provides information about PSS (Professional Sales Services), an air compressor and air preparation systems company. It lists their contact information and locations in Mumbai and Thane. It then provides details of the various compressor, air cylinder, valve, filter, regulator and other products they offer. These include oil lubricated and oil-free screw compressors, piston compressors, air cylinders of various sizes, directional control valves, solenoid valves, air line components like filters, regulators, lubricators and more. Product specifications around flow rates, pressure ranges, motor power and other technical details are provided.
3800 series -prv-installation-and-maint-instructions_-802_t_-r2roberto de la cruz
The document provides maintenance instructions for Farris Series 3800 pilot-operated safety relief valves. It includes bills of materials and step-by-step instructions for disassembling, cleaning, repairing, and reassembling the main valve and two types of pilot controls (snap-acting and modulating). The summary is as follows:
1) It outlines the contents and provides an introduction to the two main components - the pilot control and main valve.
2) Sections are dedicated to the maintenance of the main valve, snap-acting pilot control, and modulating pilot control. Bills of materials and detailed assembly/disassembly instructions are provided for each.
3) Final instructions cover reassembling the
This document provides information on pipeline and geothermal valves and services offered by Alfa Oiltech, including:
- Product information on their expanding plug valve (AlfaSeal), trunnion ball valves (AlfaBall T), and other valve types.
- Specifications like pressure classes, materials of construction, end connections, sizes, weights and dimensions for each valve type.
- Details on available trim options, spare parts, and compliance with applicable standards.
- The company aims to leverage over 100 years of experience in geothermal valves to provide reliable products, applications expertise and after-sales support to customers.
This document provides information about Rappid Valves, including:
1) Rappid Valves was established in 1981 in India and adheres to strict quality standards.
2) The company has modern manufacturing facilities and produces a comprehensive range of valves for industries like oil, gas, chemicals and more.
3) Tables and diagrams show technical specifications for API 600 gate valves in various sizes and pressure classes.
Product guide for industrial gauges from Ametek U.S. GaugeMiller Energy, Inc.
U.S. Gauge is one of the world's leading suppliers of high quality, competitively priced pressure gauges, diaphragm seals, temperature gauges and thermowell fittings. The product line includes a wide range of gauges, from vacuum pressure to a 23,000 psi gauge pressure device, in single or dual scale dials. Gauge sizes range from 1-1/2 inches to 6 inches, with brass, 316 stainless steel, or Monel internals. USG offers a complete range of options for all the above products, such as a gauge snubber, Sta-Kool cooling element, siphon, over-pressure protector, and much more.
CKD - Pneumática para SALA LIMPA 2023.pdfJúlio Gengo
(1) The document discusses pneumatic components for clean room specifications, including pneumatic cylinders, auxiliary components, sensors, air blow valves, air unit components, and directional switching valves.
(2) It introduces CKD's clean component system for use in clean rooms, which realizes CKD's original clean concept by providing products that match the purity requested by users and prevent foreign matter from entering clean rooms.
(3) The system features vacuum and exhaust treatment to purge dust, product inspection and packaging in an ESD-proof bag, and the ability to select components based on the target clean room's cleanliness level and other factors.
CT_Centrifugal_Pumps_brochure_ pour différent seceteurMehdiACIL2
The document provides information about Tapflo centrifugal pumps, including:
- Tapflo is a leading pump manufacturer that focuses on delivering fluid processing solutions and support worldwide.
- The document discusses Tapflo's centrifugal pump models, including the CTI industrial series and CTH hygienic series.
- Performance curves are presented showing flow rate and head for various Tapflo centrifugal pump models.
The document is a price list from Flomatic Corporation that highlights several new products, including:
1) Model 80E-VFD check valves designed for use with variable frequency drive pumps to minimize flow losses and hydraulic shocks.
2) Model 888S6/888S6R stainless steel wafer style check valves available in 2"-8" sizes.
3) Model 82DI-VFD check valves with male x male threads for connecting pumps to pipes in 2 1/2", 4", and 5" sizes.
Titan brand Suction Diffuser provides pump protection while reducing space, energy, installation, and maintenance requirements. The Suction Diffuser functions as a strainer, preventing foreign materials and harmful particulates from entering the pump inlet. It also employs internal vanes that reduce turbulence to minimize stress and erosion of the pump body and components. The innovative product design allows a single component to replace three in a typical pump installation: elbow, strainer, entry pipe.
Known for manufacturing, supplying, exporting, distributing, wholesaling, trading, retailing and importing an extensive range of high quality Control Panel Products, Tricon Enterprises was set up in the year 2003. The control panel product offered by us is inclusive of Plug in Relays & Sockets Type, AC Contactors Relay Type and Control Switches. By using advanced machinery, our professionals manufacture these control panel products in compliance with the industry set norms and regulations.
The document describes the AT-HD Heavy Duty Actuator Series from Air Torque. The series provides higher torque actuators for heavy duty applications based on a scotch yoke design. The actuators can be customized with options like travel stops, power modules, temperature ranges, materials, coatings, and manual overrides. Air Torque tests all actuators in-house to ensure quality and reliability.
The document describes Beijing Haolifa Group, a Chinese company that specializes in high-performance valves. It discusses Haolifa's production facilities in Beijing and Shanxi that can produce up to 1 million valves annually. It also introduces some of Haolifa's butterfly valve product lines and provides technical specifications for valves ranging from 50mm to 1200mm in diameter.
Marck & Suzhik Valves", is engaged in the business of manufacturing and supplying a wide range of Industrial Equipment. Our offered range of industrial equipment consist of Industrial Valves, Valve Automation and Manual Valves.
Zigong Zigao Valve Co., Ltd. was founded in 2008 and covers 22092 square meters. It has 112 staff and focuses on manufacturing industrial valves, including ball valves, gate valves, globe valves, and butterfly valves from 1/2” to 56” in size. After developing for 6 years, Zigao now supplies products to over 15 countries and is one of China's leading industrial valve suppliers. Zigao has quality certifications like ISO 9001 and product approvals from organizations like API and CE. It has a research team that develops new valve products and testing facilities to ensure high product quality.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEMHODECEDSIET
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
STNC Catalog
1.
2.
3. Ningbo Sono Manufacturing has a history of 25 years in pneumatic field. Our company has set up
Zhejiang provincial research and development center and hired domestic and overseas engineers.
we produce six series of products as following: Air source treatment, Pneumatic control elements,
Pneumatic act elements, Air press punch, Pipe fittings and Pneumatic tubes. We have the ability
to supply the whole set of pneumatic system. Adopting the international advanced technique
and machine equipment, we have passed ISO9001:2008 and got CE, ROHS certifications. And
developing actively the market of home and abroad and building a wide sales net and after-sale
service system. Satisfactory service to customers . Meanwhile, we won “National High and New
Techno-logy Enterprises”, ” Technology Innovation Model Company” and so on . STNC brand
has been Famous Brand in Zhejiang province, STNC products have been regarded as brand
products in Zhejiang province, selling well all over the world.
4. Standard is what to identify the products’ quality. Go for establish the standard is the
symbol of the level of the company.
Mr Mao Xinqiang is the general manager of Ningbo Sono Manufacturing Co; Ltd,
and also is one member of the (SAC/TC3/SC2). 3 national standard is made by our
company in the last 3 years.
November, 2008, Mr Mao Xinqiang went to UK to attend the meeting of ISO/TC131/
SC5 as the only one from China.
Ningbo Sono Manufacturing Co; Ltd got a lot
of honor, because of power of manufacturing,
first class technical standard, deal with
concrete matters relating to work, because of
profession .
2008 Beijing Olympic Game is the blend of the Chinese culture and Olympic spirit;
it’s our honor that we can do something for this.
We design and carry out the project as “The letter to future”, “Red leaves fly
in the sky”, “Flower blossom out in the lawn” during 2008 Beijing Olympic
Game.
General manager and the Chairman of ISO/TC131 General manager and the secretary-general
5. In order to make sure our products are the best in the market. We keep the right to
update the product information any time when necessary.And we don't inform.
6. LR Series Regulator LF Series Filter
LFR Series Filter RegulatorLOE Series Lubricator
LFC Series Treatment Dyad
LC Series Treatment Triplet
LR-06-MINI
LR-08-MINI
LR-10-MIDI
LR-15-MIDI
GFR Series FiIter Regulator
GL Series Lubricator
GR Series Regulator
GFC Series FR+L
GFC Series FR+L
GC Series F+R+L
GF Series Filter
S T N C P n e u m a t i c S T N C P n e u m a t i c
Our air-source treatment products (F.R.L) are in novel design,simple structure,with handsome shape,high performance and easy
maintenance.There are various types and specifications in grade of reasonable price to meet all customers’needs.
● Pipe size :G1/8-G1/2 ● Filtration :5μm ● Working pressure :LF.LOE series : 0-16Mpa, LR.LFR series : 0.05-1.2MPa
● Applicable temperature :0-60℃
LF-06-MINI
LF-08-MINI
LF-06-D-MINI
LF-08-D-MINI
LF-10-MIDI
LF-15-MIDI
LF-10-D-MIDI
LF-15-D-MIDI
LFR-06-MINI
LFR-08-MINI
LFR-06-D-MINI
LFR-08-D-MINI
LFC-06-MINI
LFC-08-MINI
LFC-06-D-MINI
LFC-08-D-MINI
LC-06-MINI
LC-08-MINI
LC-06-D-MINI
LC-08-D-MINI
LOE-06-MINI
LOE-08-MINI
LFR-10-MIDI
LFR-15-MIDI
LFR-10-D-MIDI
LFR-15-D-MIDI
LFC-10-MIDI
LFC-15-MIDI
LFC-10-D-MIDI
LFC-15-D-MIDI
LC-10-MIDI
LC-15-MIDI
LC-10-D-MIDI
LC-15-D-MIDI
LOE-10-MIDI
LOE-15-MIDI
7. - 3 - - 4 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
Our air-source treatment products (F.R.L) are in novel design,simple
structure,with handsome shape,high performance and easy maintenance.There
are various types and specifications in grade of reasonable price.They can
meet all customers’needs.
● Port size :G1/8-G1 ● Filtration :5μm ● Working pressure :0-1Mpa
● Applicable temperature :0-60℃
TF Series Filter
TR Series Regulator
TL Series Lubricator
9. Regulator
Regulator special for oxygen bar
TMR2000-02
- 7 - - 8 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
TC Series F+R+L
TC Series F+R+L
Big Filter
Precise Regulater
Big Regulator
TOR2000
Working pressure :0-0.1Mpa
10. Highest Pressure : 3.6Mpa
TSL-08D
TSL-10D
TSL-15D
TSL-20D
TSL-25D
TSL-40D
TSL-50D
TYH-10
TWH-8
TWH-10
TWH-15
TWH-20
TWH-25
TWH Series High
Pressure Filter Regulator
AFF Series Main Road Filter
AMD Series Micro Mist Separator
AMG Series Drop Seperator
AM Series Oil Seperator
AMH Series Micro Mist Seperator With Front Filter
AME Series Ultramicro Oil Seperator
AMF Series Deodorised Filter
AFF2B AFF4B AFF8B AFF11B
AFF22B AFF37B AFF75B
AM150
AM250
AM350
AM450
AM550
AM650
AM850
AMD150 AMD250 AMD350 AMD450
AMD550 AMD650 AMD850
AMG150 AMG250 AMG350 AMG450
AMG550 AMG650 AMG850
AME150 AME250 AME350 AME450
AME550 AME650 AME850
AMF150 AMF250 AMF350
AMF450 AMF550 AME650
AMF850
AMH150
AMH250
AMH350
AMH450
AMH550
AMH650
AMH850
Remove the contamination in compressed air such as oil,water and sdid etc.improve the performance of dryer in
downstream.extend the lifetime of precision filter,prevent the breakdown of component.
- 9 - - 10 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
TYH Series High Pressure
Regulator
TRY Series Regulator
TSL Series Air Filter
TIU Series Lubricator
TSH Series High Pressure Filter
● Highest pressure 1.6Mpa
● Highest pressure 1 Mpa
● Highest pressure 1 Mpa
● Highest pressure 3.6Mpa
● Highest pressure 3.6Mpa
11. Filter element
Iron bracket
Water cup / Oil cup( metal cup)
Auto drain cup
Oil window
TF2000 water cup
Y40
Y50
YBF60
YBF100
YK60
YK100TF3000 water cup
TF4000 water cup
TL3000 oil cup
TL4000 oil cup
TL2000 oil cup
TF2000 CUP
TL2000 CUP TF3000 CUP
TF4000 CUP
TL3000 CUP
TL4000 CUP
TF3000 CUP
TF4000 CUP
GF3000 water cup
GL3000 oil cup
plastic filter element
brass filter element
G series diaphram
S T N C P n e u m a t i c S T N C P n e u m a t i c
Air Source Treatment
Pressure Gauge
Air Source Connector
Air Source Treatment Diaphram
Auto Drain Valve
TL2000 Oil window
GL2000 Oil window
TL4000 Oil window
TR4000
series diaphram
TR3000
series diaphram
TR2000
series diaphram
TC4010 Bracket
TC4000 Bracket
TC3010 Bracket
TC3000 Bracket
GFC3000 Bracket
GC3000 Bracket
GFC2000 Bracket
GC2000 Bracket
TC2010 Bracket
TC2000 Bracket
TC5010 Bracket
TC5000 Bracket
TF2000/3000 Bracket
TF4000/5000 Bracket
TR2000/3000 Bracket
TR4000/5000 Bracket
TF2000 filter element
TF3000 filter element
TF4000 filter element
TF5000 filter element
GF2000 filter element
GF3000 filter element
12. - 13 - - 14 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
TG2531-08M
TG2532-08M
TG23-06E-NO
G100-5T
G200-5T
G300-5T G400-5T
G130-5T G230-5T
G330-5T G430-5T
100 5TG
TG2521-06M
TG2522-06M
TG2541-10M
TG2542-10M
It is a pneumatic valve controlled by micro electric signal,with small dimension,large flow,handsome shape,reliable performance
and long service life.it can be installed in integration.It is an ideal direction control element,applicable to the electro-mechanical
integration.There are multiple specifications for your choice.
●Port size:G1/8-G1/2 ●Working pressure:0.15-0.8Mpa ●Applicable temperature:-5-50℃
TG Series Namur Solenoid Valve
2 Positions/5 Ports Series Solenoid Valve
2 Positions/2 Ports,2 Positions/3 Ports
Series Solenoid Valve
TG Series Air Control Valve
TG Series Air Control Valve
2 Positions/5 Ports Series Air Control Valve
2 Positions/5 Ports Series Air Control Valve
3 Positions/5 Ports Series Air Control Valve
number of connector
1-16 1-16
1-16 1-16
series
G Series Manifold
Type
100:1/4
200:1/4
300:3/8
400:1/2
130:1/4
230:1/4
330:3/8
430:1/2
14. FG3512-06CL
FG3522-08CL
FG3532-10CL
FG2511A-06
FG2512A-06
FG2521A-08
FG2522A-08
FG2531A-10
FG2532A-10
- 17 - - 18 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
FG Series Solenoid Valve
FG Series Air control Valve
FG Series Air Control Valve
TM Series High
Frequency Valve
VT Series High
Frequency Valve
TGV Series Diaphragm Valve
YH Series High Pressure Valve
FG Series Manifold
3 Positions/5 Ports Series Solenoid Valve
2 Positions/5 Ports Series Air Control Valve
2 Positions/5 Ports Series Air Control Valve
FG2511A-06
FG2512A-06
FG2521A-08
FG2522A-08
FG2531A-10
FG2532A-10
FG2541A-15
Rotary Valve
VT307-02
VT307V-02
TGV24-08L
TGVD24
TG358-V11
TG2522-08W
TGV24-08
F100-5T
F200-5T
F230-5T
F300-5T
Special Solenoid Valve for
Door Pump Industry
Electric Rotorry Valve Special
for Oxygen Bar Industry
High Frequency Valve 100/S
Pressure :0.15-2.4MPa
15. - 19 - - 20 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
Hand Valve
The valve has fantastic outlook,credible function,and
more durable with many specifications!
Hand-Draw Valve
TGA Series Manually-Turn Valve
Hand-Draw Valve
Manually-Turn Valve(Ceramic Seal)
TG Series Manually-Turn Valve
K Series Manually-Turn Valve
Mechanical Valve
Manually-Turn Valve
Mechanical Valve
Pressure:0-0.8MPa
Pressure:0-1.0MPa
Pressure:0-0.8MPa
16. - 21 - - 22 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
2 Positions/5 Ports Mechanical Valve
2 Positions/3 Ports Mechanical Valve
2 Positions/3 Ports Mechanical Valve
2 Positions/3 Ports Mechanical Valve
2 Positions/5 Ports Foot Valve
2 Positions/5 Ports Valve
With Protective Shield
2 Positions/3 Ports
2 Positions/4 Ports Foot Valve
Check Valve
Air-Control Check Valve
Mechanical Valve
(with internal lock)
(with internal lock)
MCS4
MCS4-R
17. FYC-
Coil ● Ordering Code C
Specification Coil
AC220V
Standard
Voltage
T
Plug Mode:
No Mark :Lead Wire
T :DIN Terminal
L :LED Indicator
TG2521
TG2521CL- S
S:Die cast coil
Diaphram
Flat ring
1/8 1/4
3/8 1/2
TE-10
TE-15 TUW-10
TUW-15
TUW-20
TUW-25
TUW-35
TUW-40
TUW-50
TWS-10
TWS-15
TWS-20
TWS-25
TWS-35
TWS-40
TWS-50
TE-20
TE-25VK-08
VK-16
VK-20
VK-36
- 23 - - 24 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
Speed Control Valve
Hand Slipping Valve
Quick Exhaust Valve
Shuttle Valve
Vacuum Valve
Shocking Equipment
Vehide gas value
(metal seal)
Valve Terminal
18. The valve has fantastic outlook,credible function,and more durable!It
is suitable for the automation field,many specifications to choose!
TD Series Pilot Solenoid Valve
Simulation and Figure
Electric Timer
HLP Series Pressure
Controller
Pressure antroiler
PK Series Solenoid Valve
TF Series Solenoid
Valve
TUW Series Solenoid Valve
UWK Series Normally-
Open Valve
TE Series Diaphragm
Solenoid Valve
TWS Stainless Steel Solenoid Valve
- 25 - - 26 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
ZF Series Angel Valve
ZF Series Angel Valve
UH Series High Pressure Valve
TUS Series High-Temperature
Solenoid Valve
UME Series Flooding Valve
UM Series Pulse Valve
TPM11-NO
TPM11-NC
XY-711
19. TGC、TGU Series Standard Cylinder(TGC :Profile、TGU :Tie-rod)
Bore size:32-100mm Bore size:125-200mm(ISO6431)
TGIC Series big size cylinder(ISO6431)
Bore size :Φ250 Φ320
● Ordering Code
● Ordering Code
TGC Standard double acting type
TGCD Double axis double acting type
TGCJ Acting adjustable double acting type
TGU Standard double acting type
TGUD Double axis double acting type
TGUJ Acting adjustable double acting type
Bore size X Stroke Magnet type
No Mark :Without
magnet
S :With magnet
Installation type
No Mark : Basic type
LB :Foot mounting type
FA :Foot flange mounting type
FB :Rear-Flange mounting type
CA :Pivot type
CB :Clevis mounting type
TC :Trunnion type
Series
TGF Series Door Pump Cylinder
Bore size:Φ63 Φ80 Φ125
Standard double
acting type
Bore size X StrokeSeries Magnet type
NO Mark:Without
magnet
S:With magnet
Environment-friendly
Environment-friendly
TGI
- 27 - - 28 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
TGD Series Standard Cylinder(ISO6431)
Bore size:32-125
TGI Series Standard Cylinder(ISO6431)
Bore size:32-125
● Ordering Code
● Ordering Code
TGD Standard double acting type
TGD Double axis double acting type
TGDJ Acting adjustable double acting type
TGI Standard double acting type
TGID Double axis double acting type
TGIJ Acting adjustable double acting type
Bore size X Stroke
Bore size X Stroke
Series
Series
Magnet type
NO Mark:Without magnet
S:With magnet
Magnet type
NO Mark:Without magnet
S:With magnet
Installation type
No Mark : Basic type
LB:Foot mounting type
FA:Foot flange mounting type
FB:Rear-Flange mounting type
CA:Pivot type
CB:Clevis mounting type
TC:Trunnion type
Installation type
No Mark : Basic type
LB:Foot mounting type
FA:Foot flange mounting type
FB:Rear-Flange mounting type
CA:Pivot type
CB:Clevis mounting type
TC:Trunnion type
Environment-friendly
Environment-friendly
20. B
TGN Series Compact Cylinder Bore size :12-100mm
● Ordering Code
TGN Standard double acting type
TGND Double axis double acting type
TGNJ Acting adjustable double acting type
TGTN intrude type
TGSN extrude type
TGNT double acting,multi-mounting type
Bore size X StrokeSeries Magnet type
No Mark:Without
magnet
S:With magnet
Thread form
No mark:femal thread
B:male thread
N:without thread
TGL:Double acting
TGLD:Double axis double acting type
TGLJ:Double axis double acting with
adjustable type
TGSL:Single acting intrude type
TGTL:Single acting extrude type
C
No mark:rubber cushion
C:air cushion
≥ Φ16mm suits air cushion
- 29 - - 30 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
● Ordering Code
● Ordering Code
TGL Series Micro Cylinder(ISO6432)
Bore size:8-40
Bore size X Stroke Installation type
No Mark : Basic type
LB:Foot mounting type
FA:Foot flange mounting type
SDB:Trunnion type
TGM Series Cylinder(Aluminum tube)
Bore size :20-40mm
TGL Series Cylinder(Stainless Steel)
Bore size :20-40mm
Series
Series
TGM Standard double acting type
TGMD Double axis double acting type
TGMJ Acting adjustable double acting type
TGSM Single acting intrude type
TGTM Single acting extrude type
TGA Standard double acting type
TGAD Double axis double acting type
TGAJ Acting adjustable double acting type
TGSA Single acting intrude type
TGTA Single acting extrude type
Bore X Stroke Magnet type
NO Mark :Without magnet
S :With magnet
Installation type
No Mark : Basic type
LB:Foot mounting type
FA:Foot flange mounting type
FB:Rear-Flange mounting type
Back cover type
CA:Fishtail type
CM:Rounded type
U:Horizontal type
※ For single acting cylinder,the MAX stroke is 50mm,with the
max bore size is 63mm
※ For single acting cylinder,the MAX stroke is 50mm,with the max bore size is 63mm
CQ2 Series Compact Cylinder
● Ordering Code
Basic type:CQ2
Built-in magnet:CDQ2
Installing way
B-Through-hole
A-Both ends tapped
12-ø12mm
16-ø16mm
20-ø20mm
25-ø25mm
32-ø32mm
40-ø40mm
50-ø50mm
63-ø63mm
80-ø80mm
100-ø100mm
Stroke Action
D-Double acting
S-Single acting(
Spring Return)
T-Single acting(
Spring Force out)
Cylinder Body(select)
Blank-Female Thread Rod End
C-With Rubber Cushion
M-Rod End Male Thread
*Rubber Cushion is not available
single acting cylinder
Single
Acting
Double
Acting
Bore
Size
B 12 10 D
A 20 30 D
M
C
TGMTGA
21. ● Ordering Code
Basic type:CU
Built-in magnet:CDU
Type
Blank-Basic type
K-no rotate piston rod
Stroke
12 10 S
K 20 30 D
6-ø6mm
10-ø10mm
16-ø16mm
20-ø20mm
25-ø25mm
32-ø32mm
Bore Size
CU Series Free-mounting cylinder
Action
D-Double acting
S-Single acting(Spring Return)
T-Single acting( Spring Force out)
● Ordering Code
Basic type:CUJB
Built-in magnet:
CDUJB
Type
Blank-Female thread Rod End
(ø4mm without thread)
Stroke
4 6 S
M8 10 D
4-ø4mm
6-ø6mm
8-ø8mm
10-ø10mm
*ø14mm Cylinder
without magnet ring
inside
Bore Size
M-Rod End Male Thread
Built-in magnet:CXS
Stroke
M 20 50
● Ordering Code
6-ø6mm
10-ø10mm
16-ø16mm
20-ø20mm
25-ø25mm
32-ø32mm
Bore Size
*Cylinder can be serewed at 4 directions and selected air inlet position.
Action
D-Double acting
S-Single acting(
Spring Return)
Bearing
M-Slide bearing
L-Ball bushing bearing
CUJ Series Minitype Free-mounting cylinder
CXS Series Double Tubes cylinder
ACP S LBB
Thread form
No mark:femal thread
B:male thread
N:without thread
Mounting way
No mark:without installing
FA: front flang mounting type
CA: Pivot type
CB: back flange mounting type
LB :root mounting type
20 30X
ACP series of compact cylinder
- 31 - - 32 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
Magnet type
No Mark:Without
magnet
S:With magnet
● Ordering Code
Bore x Stroke
TGP Series Needle Cylinder
Bore size :Φ6-15
● Ordering Code
Bore size X Stroke W/Screw Cap Fitting
H4 :ø4/ø2.5Tube
H6 :ø6/ø4Tube
Series Installing Way
B :Board installing way
S :Inside way
Pole End Thread
Blank :W/Thread
B :W/O Thread
THZ Series Cylinder
● Ordering Code
TMN Clamp Cylinder series
Bore size:Φ50-63
Standard double
acting type
Bore size X StrokeSeries Magnet type
NO Mark:Without
magnet
S:With magnet
22. MHC2 -
bore
6-φ6mm
10-φ10mm
16-φ16mm
20-φ20mm
25-φ25mm
10 D
little mode :MHZ2-6
standard mode :MHZ2-
dustproof mode:MHZJ2-
D10
bore
6-φ6mm
10-φ10mm
16-φ16mm
20-φ20mm
25-φ25mm
32-φ32mm
40-φ40mm
10
Dustproof gumsheath material
No mark-neoprene
F-FKM
S-Si
D F
MH Series Air Gripper
● Ordering Code
● Ordering Code
● Ordering Code
● Ordering Code
Acting type
D-Double acting
S-single acting(normally open)
Acting type
D-Double acting
S-single acting(normally open)
Acting type
D-Double acting
S-single acting(normally open)
C-single acting(normally closed)
MHL2 Series Broad Type Air Gripper
(Paralled Open Close Type)
Finger open/Close strokeBore Size
Bore Size
mark
with
mark
Built-in magnet:
MHY2 Series Minitype 180
Air Gripper
o
- 33 - - 34 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
● Ordering Code
Built-in magnet:CXSW
Stroke Long stroke code
No mark: standard stroke
XB11: long stroke
Bore SizeBearing
M-Slide bearing
L-Ball bushing bearing
CXSW Series Double Tubes cylinder
MGP Series New Slim Guide
Built-in magnet:MGP
Bearing
M-Slide bearing
L-Ball bushing bearing
Stroke
● Ordering Code
Bore Size
23. Piston rod Tie rod
Cylinder assembly kits
Tube
45 piston rod
304 piston rod
TGC series
TGI series
TGU Kits
Bore size: Φ32-Φ100TGU Kits
Bore size: Φ125-Φ200
TGC Kits
Bore size: Φ32-Φ200
TGI Kits
(For Mickey Mouse Tube,
Bore Size Φ32-Φ100)
(ISO6431)
TGI Kits
(For Mickey Mouse Tube,Bore
Size Φ125-Φ200) (ISO6431)
TGIC Kits
( Bore size: Φ250-Φ320)
TGD Kits(For Square Tube
Bore size: Φ32-Φ125)(ISO6431)
TGN Kits
CQ2B Kits
TGL Kits
(ISO6432)
TGM Kits
TGU,TGI Mickey mouse
Aluminum Tube
TGD,ACP Square
Aluminum Tube
TGC Round Aluminum Tube
TGN Aluminum TubeCQ2 Aluminum
Tube
TGL Stainless Steel
Round Tube
TJ
series
TJ: right fixation
(left-right)
TJ: Left fixation
(right-left)
15
stroke
φ25-13mm
φ32-15mm
φ40-15mm
φ50-20mm
φ63-20mm
40
bore
25:φ25mm
32:φ32mm
40:φ40mm
50:φ50mm
63:φ63mm
D
Clamp
D:double side clamp arm
Blank :single side clamp arm
φ25 no double side clamp arm
A: Precision
B: Normal
A: with angle
adjustable bolt
B: With shock absorber
Size code
- 35 - - 36 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
● Ordering Code
● Ordering Code
● Ordering Code
● Ordering Code
Swing Clamp Cylinder
(Φ25-Φ63)
MSQ series turning swing cylinder(Normal/precision)
(Bore:Φ10-200)
TGH Series Stopper
Cylinder Bore Size :
50-63
RSQ Series Fixed Stroke
Rod Cylinder
Basic type:RSQ
Built-in magnet:RSDQ
Fixed Stroke rod style
Stroke
20 15 D
R20 15 D
20-ø20mm
32-ø32mm
40-ø40mm
50-ø50mm
Bore Size
B
B
Installing way
B-through-hole
A-both end stapped
style
R
Blank-Rounde bar type(ø20-ø50)
K-Chamtered type(ø20-ø50)
R-Rolier type(ø20-ø50)
L-Lever type(with energy absorbing)(ø32-ø50)
B-Lever type(adjustable energy absorbing)(ø32-ø50)
C-Lever type(adjustable shock absorber、with temporalg cancel equipment)
(ø32-ø50)
D-Lever type(adjustable shock absorber、with auto lock equipment)ø32-ø50)
E-Lever type(adjustable shock absorber、with temporary cancel
equipment and auto-lock equipment)(ø32-ø50)
TGH
Standard double acting
50
Bore Size X Stroke
25X
series
Action
D-Double acting
B-Double acting(spring
type)
T-Single acting
(Spring Force out)
external
tie rod
external
tie rod
internal
tie rod
screwbolt type
s c re w b o l t
type
24. HR
series
precision adjustable mode
30
stroke
30:30mm
60:60mm
SC
BK PAB PBM IH
PI
PM
Connection accessories
TGD/TGI series cylinder accessories
Bore :Φ32-Φ125 (ISO6431)
TGC/TGU series cylinder accessories
Bore :Φ32-Φ100
Bore :Φ125-Φ200 (ISO6431)
Magnetic sensor switch
TGA/TGM/TGL series cylinder accessories
TGL(ISO6432)
- 37 - - 38 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
Shock Absorber
● Ordering Code
● Ordering Code
● Ordering Code
● Ordering Code
16
Stroke
1
Strike Speed
1 :High Speed
2 :Middle Speed
3 :Slow Speed
AC
Series
Auto Retrieve
Way Regulated
14
Bearing
Outer Thread
Buffer Cap
Blank :W/Buffer Cap
N :W/O Buffer Cap
CS1-S
CS1-H
CS1-J
CS1-F
CS1-U
CS1-M
CS1-72
Fixed clampFixed metal belt
Floating Joint-F
Axes Adapter-Y
Flsh-eye Adapter
Axes Adapter-ITGA
Series
TGA/TDM
TGL
20
Bore
TGL :8-40
TGM/TGA :16-40
Type
FA,LB
SDB
LB
FA
SDB
LB
LB
CA
CB
FA、FB
TC
TC(TGC)
TGC
TGD
Series
TGD/TDI
TGC/TGU
50
Bore
TGD/TDI :32-125
TGC/TGU :32-200
Type
FA,FB
TC
CA,CB
CR
LB
LB
CA
CB
CR
FA、FB
TC
LB
25. Metric size-G
thread fitting
YPKD 6-4-01
YPKD 6-4-02
YPKD 6-4-03
YPKD 8-6-01
YPKD 8-6-02
YPKD 8-6-03
YPKD 10-8-02
YPKD 10-8-03
YPKD 10-8-04
YPKD 12-10-02
YPKD 12-10-03
YPKD 12-10-04
triple universal
male elbow
Different dia.teeDifferent dia.triple
universal male elbow
Different dia.straight Plug-in reducer Different dia.union Y
Double union L
YPYW Diff. Diam Union Y
YPEG Diff. Diam
Union Tee A
YPEW Diff. Diam
Union Tee B
YPYW6-4
YPYW8-6
YPYW10-8
YPEG6-4
YPEG8-6
YPEG10-8
YPEW6-4
YPEW8-6
YPEW10-8
YPYW12-10
YPYW16-12
YPEG12-10
YPEG16-12
YPEW12-10
YPEW16-12
- 39 - - 40 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
Characteristics:
1.Fleetness install,simple and clever,space saving.
2.Pattern variety,meet any needs in installation of pneumatic Tubes.
3.Plastic Tubes can be turned feely after installation.
4.The release button adopted with the oval design,take down more labor-saving
and conveniently
5.All cone tube threads covered with Teflon airproof gum have high sealed
performance.
6.With internal hexagon thread,all straight fittings of YPC type are easy to be
installed in narrow positions.
● Ordering Code
Quick Coupler
1 Type 2 Male Diameter of Hose
Serial Number
Caliber
4
φ4
6
φ6
8
φ8
10
φ10
12
φ12
3 Style and Dimension of Screw Thread
01
R1/8
02
R1/4
03
R3/8
04
R1/2
Cone Tube Thread
Serial Number
Style
M5
M5x0.8
M6
M6x1
M8
M8x1
M10
M10x1
M12
M12x1.25
M12A
M12x1.5
M16
M16x1.5
Metric Screw Tjread
Serial Number
Style
G01
G1/8
G02
G1/4
G03
G3/8
G04
G1/2
Cone Tuke Thread
Serial Number
Style
Y :White(brass)
T :Black(steel)
Type tube O.D Thread
Screw thread straight union Screw thread double union L Extended male elbow Male branch teeMale run tee Branch Y
Hexagon socket head
universal male elbow Universal female elbow Female elbow Female connector Speed controller Different dia.union L
Plug Straight union Bulkhead union
Union Tee Union Y Union L
Cross
Different dia.triple
union Triple union
YPC14-03
YPC14-04
YPL14-03
YPL14-04
YPB14-03
YPB14-04
YPD14-03
YPD14-04
YPX14-03
YPX14-04
YPE-14 YPY 14 YPY 14
YPU 14 YPZA 14
PC 14-G03
PC 14-G04
PWT 14-G03
PWT 14-G04
PST 14-G03
PST 14-G04
PL 14-G03
PL 14-G04
PT 14-G03
PT 14-G04
PLL 14-G03
PLL 14-G04
26. Hand valveNon-returning throtte valve
Non-returning throtte valve / hand valve(with O-ring)
※ The above fittings code with B means union, without B means Tee
※ The above fittings code with B means union, without B means Tee
※ The above fittings code with B means union, without B means Tee
- 41 - - 42 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
Brass Quick Coupler
Cut-in Straight,Quick-
changed Fitting
Cut-in
Straight,Terminal
Quick-changed Fitting
Cut-in L shaped,
Quick-changed Fitting
L-shaped,Turn-in-end,
Quick-changed Fitting
Cut-in T-shaped,
Quick-changed Fitting
T-shaped,Turn-in-end,
Quick-changed Fitting
Y-shaped,Turn-in-end,
Quick-changed Fitting
Cut-in Cross,Quick-
changed Fitting
Cut-in Cross,Turn-
in-end,Quick-changed
Fitting
Cut-in Straight,Different
Diameter,Quick-changed
Fitting
Cut-in L-shaped,Joined-
in-edn,Quick-changed
Fitting
Cut-in L-shaped,board-
penetrated,Quick-changed
Fitting
Cut-in 3 Ways,Join-in-
end,Quick-changed Fitting
Hand valveNon-returning throtte valve
YNSF4 YNSF6
YNSF8 YNSF10
YNSF12
YHVFS06-01B
YHVFS06-02B
YHVFS06-03B
YHVFS08-01B
YHVFS08-02B
YHVFS08-03B
YHVFS10-02B
YHVFS10-03B
YHVFS10-04B
YHVFS12-02B
YHVFS12-03B
YHVFS12-04B
YHVFS06-01
YHVFS06-02
YHVFS06-03
YHVFS08-01
YHVFS08-02
YHVFS08-03
YHVFS10-02
YHVFS10-03
YHVFS10-04
YHVFS12-02
YHVFS12-03
YHVFS12-04
YHVFS06-G01B
YHVFS06-G02B
YHVFS06-G03B
YHVFS08-G01B
YHVFS08-G02B
YHVFS08-G03B
YHVFS10-G02B
YHVFS10-G03B
YHVFS10-G04B
YHVFS12-G02B
YHVFS12-G03B
YHVFS12-G04B
YHVFS06-G01
YHVFS06-G02
YHVFS06-G03
YHVFS08-G01
YHVFS08-G02
YHVFS08-G03
YHVFS10-G02
YHVFS10-G03
YHVFS10-G04
YHVFS12-G02
YHVFS12-G03
YHVFS12-G04
YHVSF01-06B
YHVSF02-06B
YHVSF03-06B
YHVSF01-08B
YHVSF02-08B
YHVSF03-08B
YHVSF02-10B
YHVSF03-10B
YHVSF04-10B
YHVSF02-12B
YHVSF03-12B
YHVSF04-12B
YHVSF01-06
YHVSF02-06
YHVSF03-06
YHVSF01-08
YHVSF02-08
YHVSF03-08
YHVSF02-10
YHVSF03-10
YHVSF04-10
YHVSF02-12
YHVSF03-12
YHVSF04-12
YHVSF01-G06B
YHVSF02-G06B
YHVSF03-G06B
YHVSF01-G08B
YHVSF02-G08B
YHVSF03-G08B
YHVSF02-G10B
YHVSF03-G10B
YHVSF04-G10B
YHVSF02-G12B
YHVSF03-G12B
YHVSF04-G12B
YHVSF01-G06
YHVSF02-G06
YHVSF03-G06
YHVSF01-G08
YHVSF02-G08
YHVSF03-G08
YHVSF02-G10
YHVSF03-G10
YHVSF04-G10
YHVSF02-G12
YHVSF03-G12
YHVSF04-G12
YHVSS01-01B
YHVSS02-01B
YHVSS02-02B
YHVSS03-02B
YHVSS03-03B
YHVSS04-03B
YHVSS04-04B
YHVSS01-G01B
YHVSS02-G01B
YHVSS02-G02B
YHVSS03-G02B
YHVSS03-G03B
YHVSS04-G03B
YHVSS04-G04B
YHVSS01-01
YHVSS02-01
YHVSS02-02
YHVSS03-02
YHVSS03-03
YHVSS04-03
YHVSS04-04
YHVSS01-G01
YHVSS02-G01
YHVSS02-G02
YHVSS03-G02
YHVSS03-G03
YHVSS04-G03
YHVSS04-G04
YHVFF6-06B
YHVFF8-06B
YHVFF8-08B
YHVFF10-10B
YHVFF12-10B
YHVFF12-12B
YHVFF6-06
YHVFF8-06
YHVFF8-08
YHVFF10-10
YHVFF12-10
YHVFF12-12
YNASF01-04
YNASF01-06
YNASF02-06
YNASF01-08
YNASF02-08
YNASF03-08
YNASF02-10
YNASF03-10
YNASF04-10
YNASF02-12
YNASF03-12
YNASF04-12
YNASF04-01
YNASF06-01
YNASF06-02
YNASF08-01
YNASF08-02
YNASF08-03
YNASF10-02
YNASF10-03
YNASF10-04
YNASF12-02
YNASF12-03
YNASF12-04
YNASF01-G04
YNASF01-G06
YNASF02-G06
YNASF01-G08
YNASF02-G08
YNASF03-G08
YNASF02-G10
YNASF03-G10
YNASF04-G10
YNASF02-G12
YNASF03-G12
YNASF04-G12
YNASF04-G01
YNASF06-G01
YNASF06-G02
YNASF08-G01
YNASF08-G02
YNASF08-G03
YNASF10-G02
YNASF10-G03
YNASF10-G04
YNASF12-G02
YNASF12-G03
YNASF12-G04
NSF4 NSF6
NSF8 NSF10
NSF12
HVFS06-01B
HVFS06-02B
HVFS06-03B
HVFS08-01B
HVFS08-02B
HVFS08-03B
HVFS10-02B
HVFS10-03B
HVFS10-04B
HVFS12-02B
HVFS12-03B
HVFS12-04B
HVFS06-01
HVFS06-02
HVFS06-03
HVFS08-01
HVFS08-02
HVFS08-03
HVFS10-02
HVFS10-03
HVFS10-04
HVFS12-02
HVFS12-03
HVFS12-04
HVSF01-06B
HVSF02-06B
HVSF03-06B
HVSF01-08B
HVSF02-08B
HVSF03-08B
HVSF02-10B
HVSF03-10B
HVSF04-10B
HVSF02-12B
HVSF03-12B
HVSF04-12B
HVSF01-06
HVSF02-06
HVSF03-06
HVSF01-08
HVSF02-08
HVSF03-08
HVSF02-10
HVSF03-10
HVSF04-10
HVSF02-12
HVSF03-12
HVSF04-12
HVSS01-01B
HVSS02-01B
HVSS02-02B
HVSS03-02B
HVSS03-03B
HVSS04-03B
HVSS04-04B
HVSS01-01
HVSS02-01
HVSS02-02
HVSS03-02
HVSS03-03
HVSS04-03
HVSS04-04
HVFF6-06B
HVFF8-06B
HVFF8-08B
HVFF10-10B
HVFF12-10B
HVFF12-12B
HVFF6-06
HVFF8-06
HVFF8-08
HVFF10-10
HVFF12-10
HVFF12-12
NASF01-04
NASF01-06
NASF02-06
NASF01-08
NASF02-08
NASF03-08
NASF02-10
NASF03-10
NASF04-10
NASF02-12
NASF03-12
NASF04-12
NASF04-01
NASF06-01
NASF06-02
NASF08-01
NASF08-02
NASF08-03
NASF10-02
NASF10-03
NASF10-04
NASF12-02
NASF12-03
NASF12-04
YNS Series speed controllers is one way throttle valves. To regulate the flow rate of the air and then control the speed of the
cylinder.
1.Hand valves acts as a switch of the compressed air. Two-way and Three-way models for choosing.
2.Various specifications and installation type, easy to use.
1.Metal tube fitting is the pneumatic coupler made by copper
2. Both the body and button are made by copper. All the fittings have great thermostable and flame resistance
HVFS06-G01B
HVFS06-G02B
HVFS06-G03B
HVFS08-G01B
HVFS08-G02B
HVFS08-G03B
HVFS10-G02B
HVFS10-G03B
HVFS10-G04B
HVFS12-G02B
HVFS12-G03B
HVFS12-G04B
HVFS06-G01
HVFS06-G02
HVFS06-G03
HVFS08-G01
HVFS08-G02
HVFS08-G03
HVFS10-G02
HVFS10-G03
HVFS10-G04
HVFS12-G02
HVFS12-G03
HVFS12-G04
HVSF G01-06B
HVSF G02-06B
HVSF G03-06B
HVSF G01-08B
HVSF G02-08B
HVSF G03-08B
HVSF G02-10B
HVSF G03-10B
HVSF G04-10B
HVSF G02-12B
HVSF G03-12B
HVSF G04-12B
HVSF G01-06
HVSF G02-06
HVSF G03-06
HVSF G01-08
HVSF G02-08
HVSF G03-08
HVSF G02-10
HVSF G03-10
HVSF G04-10
HVSF G02-12
HVSF G03-12
HVSF G04-12
HVSS01-G01B
HVSS02-G01B
HVSS02-G02B
HVSS03-G02B
HVSS03-G03B
HVSS04-G03B
HVSS04-G04B
HVSS01-G01
HVSS02-G01
HVSS02-G02
HVSS03-G02
HVSS03-G03
HVSS04-G03
HVSS04-G04
NASF G01-04
NASF G01-06
NASF G02-06
NASF G01-08
NASF G02-08
NASF G03-08
NASF G02-10
NASF G03-10
NASF G04-10
NASF G02-12
NASF G03-12
NASF G04-12
NASF G04-01
NASF G06-01
NASF G06-02
NASF G08-01
NASF G08-02
NASF G08-03
NASF G10-02
NASF G10-03
NASF G10-04
NASF G12-02
NASF G12-03
NASF G12-04
One Touch Brass Fitting
SP13 One touch straight
female connector
SP15 One touch tee
connector
SP17 One touch elbow
male connector
SP14 One touch
straight connector
SP16 One touch elbow
connector
SP18 One touch elbow
female connector SP20 One touch tee
straight male union
SP19 One touch Straight
male connector SP28 Speed control
fitting(plug in elbow)
27. PSE plastic silencer
Silencer throttle valve
YAG-F
(Energy Efficient type)
Code :QA-8
(Use for 4-8mm)
Code :QA-10
(Use for 4-12mm)
- 43 - - 44 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
Transitional Fitting(Brass)
SP01 Blocking fitting SP02 Dyad male thread SP03 Dyad male thread SP04 Pagoda type mouth SP05 Pagoda type
elbow connector SP06 Y type forging
SP07 Stretcher SP08 Tee male connector SP09 Tee female
connector
SP10 Dyad elbow male
connector
SP11 Dyad elbow female
connector
SP12 Dyad elbow male
£female connector
Metal Coupler
YHO-2 Round 2 Ways YHO-3 Round 2 Ways YHM-2 Straight 2
Ways
YHM-3 Straight 3
Ways
YHM-4 Straight 4
Ways
YHM-5 Straight 5
Ways
Silencer
Air gun
Tube cutter
Silencer throttle valveRegulate silencer
Stainless silencer Stainless silencer
Mini silencer Silencer PSL Plastic silencer
This series products is to reduce the noise of pneumatic components and exhaust device. Can be installed directly
in the components and ports of the exhaust device. Small shape, easy to assemble, great noise elimination
1. Powerful blow, low consumption to saving energy.
2.Suitable for removing dust of any machines and equipments
BSSV-M5 BSSV-01
BSSV-02 BSSV-03
BSSV-04 BSSV-06
BSSV-08
BSSM-M5 BSSM-01
BSSM-02 BSSM-03
BSSM-04 BSSM-06
BSSM-08
BESB-01 BESB-02
BESB-03 BESB-04
BESB-06 BESB-08
PSE-M5 PSE-01
PSE-02 PSE-03
PSE-04 PSE-06
PSE-08 G1
Nickel-Plate Auto-Lock Coupler
YCN Quick coupler YCH Quick coupler YCM Quick coupler YCF Quick coupler
YHN Quick coupler YHH Quick coupler YHM Quick coupler YHF Quick coupler
28. - 45 - - 46 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
PU Pneumatic Tube PA Pneumatic Tube
● Ordering Code ● Ordering Code
● Characteristics :
1.With good resistance to the high press,vibration,abrasion.climate,and flection.
2.light weight,east equipment,convenience to fitting.
3.male & female pneumatic fitting's size precision is high, applying for all kinds connector.
4.multifold colors of fitting offered.
● Characteristics :
1.With good resistance to the high press,vibration,abrasion.climate,and flection.
2.light weight,east equipment,convenience to fitting.
3.male & female pneumatic fitting's size precision is high, applying for all kinds connector.
4.multifold colors of fitting offered.
PU tube
Nylon tube Standard
Specification
Sheet
Standard
Specification
Sheet
Code
O.D
(mm)
I.D
(mm)
PU0320 PU0425 PU0640 PU0850 PU1065 PU1611
φ3.0 φ4.0 φ6.0 φ8.0 φ10.0 φ16.0
φ2.0 φ2.5 φ4.0 φ5.0 φ6.5 φ11.0
PU Tube/Standard Specification Sheet
PU1280
φ12.0
φ8.0
Working
10 10 10 10 10 1010
kgf/cm2
Pressure
Code
O.D
(mm)
I.D
(mm)
PA0320 PA0425 PA0640 PA0860 PA1065 PA1611
φ3.0 φ4.0 φ6.0 φ8.0 φ10.0 φ16.0
φ2.0 φ2.5 φ4.0 φ6.0 φ6.5 φ11.0
PA Nylon Tube/Standard Specification Sheet
PA1280
φ12.0
φ8.0
24 24 24 24 24 2424
kgf/cm2
Pressure
Working
Pneumatic tube color Pneumatic tube color
color
color
transparent black blue red yellow green white orange
※ Not explosion within 5 mins for 2 times working pressure, at normal temperature 60℃ .
※ Not explosion within 5 mins for 2 times working pressure, at normal temperature 60℃ .
29. - 47 - - 48 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
TGZ Series Pressure-adding Cylinder
TR Series air press punch
Product characteristic
Air press punch series
Figure Dimension
Specification
Graphics Sign
Graphics Sign
Installation instruction
Can use low-pressure air to press the low-pressure oil into the
high-pressure oil.And the output pressure is up to 25 times of the
input pressure . This product is usually used in punching,rivetting
and so on.
ues cylinder as piwer executive unit,moving smoothly and reliable.
No strike in running,the quality of products and the service life of the die mould improved greatly
Operated with pushbutton by hands so that improve the safety.with foot pedal switch standby,work
efficiency improved and hands free.
The cycle of auto-punch can be adjusted and it can work automatically and continuously through electronic
controller,applicable to the field of electromechanical integration.
When working,do not put your hands into the range of punch stroke.
Pressure-adding cylinder,the air route refer to the drawing.
Working steps:1).input air,the piston pole push down;2).input
air,add pressure,3).Input air,the pressure add rod rebounce,4).
input air,piston rod rebounce.
The acting frequency of the cylinder can be controlled by the
time controller and also relative to the solenoid valve and the
dimention of the tube.
If want to add the frequency,can combine the air air input tube of
the second.
The pressure of the cylinder can be adjusted by the air pressure
under the circumstance that pressure is within the limitation.
Please adjust the cylinder according to the reality.
action
Applicable medium
Pressure range
Proof pressure air cylinder
Oil cylinder
Temperature range
Recyle oil
Working frequency
Double acting
Filtered and dry presses air
0.4~0.7MPa
15kg/cm2
210kg/cm2
-10~60℃
VG68#hydraulic oil
10-40 times/min
Time controller
Double solenoid
operating
stroke pressure x adding stroke installing way
No mark:basic type
Series
Standard double
acting type
Double solenoid
operating
Bore
Type Strength Port size
Control form
Hand control
foot pedal
Auto,push-
button,foot pedal
Bore of cylinder Stroke regulatedstroke
30. - 49 - - 50 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
TR Series air press punch TF series power-adding punch
Figure Dimension
Figure Dimension
type type
Working
pressure
Working
pressure
Working
pressure
Working
pressure
Pressed
area
Pressed
area
Pressed
area
Pressed
area
Theoretical
strength
Theoretical
strength
Theoretical
strength
Theoretical
strength
Max working height(adjustable) Max working height(adjustable)
Cylinder regulated stroke Cylinder regulated stroke
power power
Cylinder type Cylinder type
Working area Working area
Operating pressure Operating pressure
Specification Specification
31. - 51 - - 52 -
S T N C P n e u m a t i c S T N C P n e u m a t i c
TZ series pressure-adding punch
Refrigerated type air dryer
Air press punch series
Technical parameter
Technical parameter
Standard condition
Working Principles
operating condition
Model Selection Guide of refrigerated type air dryer
TZ series pressure-adding punch order specifications and theory of the output
1. adopting compressed air as power executive source,operated easily.
2. no noise as compressed oil series send out when it stops working.power saved,cost lower.
3. according to oil enhanced pressure theory,the machine acts quickly,and offers high working
strength.
4. adjusting work strength is very easy,only regulating air pressure.
5. this machine has firm structure,operating easily,putting and taking material convenient.
6. manifold functions,include inserting,holding,riverting,assembling,cutting and so on .
7. efficiently 4 poles door opening design.and any special specification can make to order.
8. worktable recommended,size:L700*D600*H780(mm),and each foot has 4 moving wheels.
9. operate introduction.
Air dryer is based on a refrigerated dehumidification, the compressed air is forced through the evaporator and heat
exchange cooling, water and oil in the compressed air gaseous after isobaric cooling, condensing into water and
hydraulic oil, and entrainment of dust, exhaust system with automatic drainage device, which can get the clean
compressed air.
Note: 1. above efforts is the theoretical calculation of output, pressure change in the practical use, such as gas-liquid pressurized cylinder itself,
clip molding etc have certain friction coefficient, customer ,when order press punch , please pay attention to have certain pressure allowance
2. If ordering have special requirements on pressure stroke and the preloading schedule etc, please give us specification conditions for further
processing and manufacturing
The correct choice of a freeze dryer, we must also take into account the actual flow of compressed air pressure, temperature,
environment temperature and pressure dew point temperature of five factors. Handing capacity of Air dryer OS=Q3*C1*C2,where
Qa is the actual flow of compressed flow.
type
Punch type Working pressure(kg) Advanced pressure(kg) Add-pressure (kg) Return tension (kg)
TZ series pressure-adding punch
Working ressure
Total Travel 100
Add pressure form 10
Total Travel 100
Add pressure form 10
Total Travel 100
Add pressure form 10
Total Travel 100
Add pressure form 10
Recyle oil VG68#hydraulic oil
Power
Air cylinder proof pressure
0.4-0.7MPaFiltered and dry presses air
Working temperature
Working frequency 10-40 times/min
Air entrance temperature
Air entrance temperature
Ambient temperature
Ambient temperature
Dew point temperature
Working pressure
Working pressure
Handing capacity Supply voltage Refrigerating power Fan powerType
Air in
and out
caliber
Equipment weight Outline
dimension
Refrigerant
Oil cylinder proof pressure
32. operational principle
Performance parameters
Ordering Code GT
series
GT-370/400GT-280GT-60
moder
60
280
370
400
60
147X83mm
234X103x163mm
45.4X78.05mm
130.8X93.2x165.42mm
- 53 - - 54 -
Oil-free air compressor series
GT series oil-free mini air compressor is my company's R & D and manufacturing of high-tech products. The product
has high efficiency and energy saving,safe and reliable stable operation, long service life, low noise, small size, light
weight, beautiful appearance, simple installation, convenient maintenance etc.
Products can be widely used in medical equipment ,automotive industry,automatic control,packing series,product
preservation ,printing machinery ,aquaculture ,water purification,analysis instrument,equipment repair,bio-
pharmaceutical ,petrochemical,plateau oxygen and other fields,in addition to the product can be used as vacuum
pump.
Structure and principle of compressor as shown, click on the shaft is arranged on the eccentric wheel, connecting
rod on the eccentric wheel through a bearing link.Due to the rotation of the rotating shaft, drive the connecting rod
reciprocating motion, so as to realize the air suction, compression and discharge process. Contrary to reciprocating
piston compressor, there is no piston pin, connecting rod so when connecting rod for reciprocating motion, on both
sides of the top surface also slight swing, this also is why called swing piston.
S T N C P n e u m a t i c S T N C P n e u m a t i c
Product structure diagram
Model
Item
Import power
Nominal working pressure
Rated speed
Applicable environment
temperature
Insulation resistance
Thermal protector Auto reset Auto reset Auto reset
1min No breakdown1min No breakdown1min No breakdown1min No breakdown
Auto reset
Installation dimension
Restart pressure
standard standard standard standard
Voltage/frequency
Nominal volume flow
Noise
Insulation grade
Dielectric strength
Allocation of capacitor
Outline dimension
Quality
The maximum
instantaneous pressure
33. - 55 - - 56 -
Product description
1、Noise is less than 70dB, long service life, simple operation and
easy maintenance.
2、This machine use automatic drainage structure,so that the
output air drier .
3、The pump can be matched with various gas tank,to meet
customer demand.
Product description
1、Noise is less than 70dB, long service life, simple operation and
easy maintenance.
2、This machine use automatic drainage structure,so that the
output air drier .
3、The pump can be matched with various gas tank,to meet
customer demand.
model
power(W)
voltage(V)
Frequency(Hz)
volume capacity(L/min)
Air tank volume(L)
Max applicable pressure(MPa)
noise (dB)
rotation rate(r/min)
Net quality(kg)
Outline dimension(mm)
model
power(W)
voltage(V)
Frequency(Hz)
volume capacity(L/min)
Air tank volume(L)
Max applicable pressure(MPa)
noise (dB)
rotation rate(r/min)
Net quality(kg)
Outline dimension(mm)
GT-1101
550
220
60
60
24
0.8
≤ 70
1400
25
425x425x650
GT-1102
1100
220
60
120
50
0.8
≤ 70
1400
45
500x340x550
Product description
1、Noise is less than 70dB, long service life, simple operation and
easy maintenance.
2、This machine use automatic drainage structure,so that the
output air drier .
3、The pump can be matched with various gas tank,to meet
customer demand.
Product description
1、Noise is less than 70dB, long service life, simple operation and
easy maintenance.
2、This machine use automatic drainage structure,so that the
output air drier .
3、The pump can be matched with various gas tank,to meet
customer demand.
GT-1103
1650
220
60
180
70
0.8
≤ 70
1400
63
950x400x640
GT-1104
2200
220
60
240
90
0.8
≤ 70
1400
85
1150x400x640
S T N C P n e u m a t i c S T N C P n e u m a t i c
model
power(W)
voltage(V)
Frequency(Hz)
volume capacity(L/min)
Air tank volume(L)
Max applicable pressure(MPa)
noise (dB)
rotation rate(r/min)
Net quality(kg)
Outline dimension(mm)
model
power(W)
voltage(V)
Frequency(Hz)
volume capacity(L/min)
Air tank volume(L)
Max applicable pressure(MPa)
noise (dB)
rotation rate(r/min)
Net quality(kg)
Outline dimension(mm)