Steam generator-part-2
•
0 likes•38 views
The document discusses the benefits of exercise for both physical and mental health. Regular exercise can improve cardiovascular health, reduce symptoms of depression and anxiety, enhance mood, and boost brain function. Staying physically active helps fight diseases and conditions, increases energy levels, and promotes better quality of life.
Report
Share
Report
Share
Download to read offline
Recommended
Nonlinear integral control for dc motor speed control with unknown and variab...
This document discusses nonlinear integral control for DC motor speed control with unknown and variable external torque. It begins with an introduction to DC motors and common speed control techniques. It then provides the basic model of a DC motor and derives the transfer function. It discusses nonlinear control systems and elements like saturation, deadband, and friction. It describes methods for solving nonlinear transient responses, nonlinear system stability, and provides a Simulink model example comparing PI and P controller performance for speed and error. References for DC motor speed control and optimization of PI controllers are also provided.
Design problem
The document provides design specifications for a mechanical system that uses pulleys, gears, a shaft, and bearings. It includes details on the power input and output requirements for different components, material properties, and design considerations. The author is tasked with designing: 1) Pulleys B and K with a belt to transmit power from pulley K to B; 2) Spur gears C and G to transmit 65% of power; 3) Helical gears E and H to transmit the remaining power; 4) The shaft connecting the components; 5) Bearings A and D to support the shaft. Calculations and checks are required to validate the design meets stress, wear, and reliability requirements.
Evaluation of thermal performance of a typical vapor compression refrigeratio...
This document describes an experiment conducted to evaluate the thermal performance of a typical vapor compression refrigeration cycle. The objectives were to learn about the components and analyze the cycle. Readings were taken of various temperatures and pressures. Calculations were done to determine compressor work, refrigeration effect, and coefficient of performance. Questions were asked about how to increase COP, the influence of temperatures, detecting refrigerant leaks, processes in the condenser, and functions of cycle components.
Refrigeration air conditioning laboratory Moist Air Properties and Air-Condi...
This document describes an experiment analyzing the properties of moist air using an air conditioning laboratory unit. Measurements of dry and wet bulb temperature were taken at different sections of the unit as air passed through a humidifying and preheating section and reheating section. The experimental results demonstrated how air conditioning processes can condition air to desired levels of temperature and humidity for occupant comfort regardless of external conditions. Calculations using psychrometric charts and equations were performed to determine air properties at each section.
Characteristics of a simply converging nozzle through which steam is passes
1. The document describes experiments conducted on converging and converging-diverging nozzles. It discusses the theory behind how these nozzles work and how properties like pressure and velocity change within the nozzles.
2. Calculations are shown for the mass flow rate through the nozzles under different pressure ratios. The critical pressure ratio where the nozzle becomes choked is also calculated.
3. Results show the mass flow rate and critical pressure ratio for two test cases of varying inlet pressures.
Power plant steam condenser
This document summarizes an experiment conducted on a steam condenser to evaluate its thermal operation under co-current and counter-current modes. It includes an abstract, introduction, apparatus description, calculations and results from testing the condenser under parallel and counter flow with constant pressure and steam flow rate. Charts show changes in temperature, heat transfer rate, efficiency and overall heat transfer coefficient for each test configuration.
Performance of the four strokes diesel engine
This document describes an experiment to study the performance of a four-stroke diesel engine at various speeds. It includes the objective to analyze the effect of speed on engine parameters. The document outlines the test procedure which involves taking readings like speed, torque, temperature and fuel consumption at different water flows through the dynamometer to vary the engine speed. Calculations are shown to determine values like power, efficiency, air-fuel ratio based on the experimental readings. Results are presented in a table for one engine speed setting as an example.
i.c engine
The document discusses internal combustion (I.C.) engines. It begins by outlining the objective of identifying types of I.C. engines, their parts, and how each part works. It then provides classifications of I.C. engines and lists their major components. The working principles of four-stroke and two-stroke engines are explained, including diagrams of their cycles. Key aspects covered are intake, compression, combustion, power and exhaust strokes in four-stroke engines and the use of crankcases and ports to enable intake and exhaust in two strokes.
Recommended
Nonlinear integral control for dc motor speed control with unknown and variab...
This document discusses nonlinear integral control for DC motor speed control with unknown and variable external torque. It begins with an introduction to DC motors and common speed control techniques. It then provides the basic model of a DC motor and derives the transfer function. It discusses nonlinear control systems and elements like saturation, deadband, and friction. It describes methods for solving nonlinear transient responses, nonlinear system stability, and provides a Simulink model example comparing PI and P controller performance for speed and error. References for DC motor speed control and optimization of PI controllers are also provided.
Design problem
The document provides design specifications for a mechanical system that uses pulleys, gears, a shaft, and bearings. It includes details on the power input and output requirements for different components, material properties, and design considerations. The author is tasked with designing: 1) Pulleys B and K with a belt to transmit power from pulley K to B; 2) Spur gears C and G to transmit 65% of power; 3) Helical gears E and H to transmit the remaining power; 4) The shaft connecting the components; 5) Bearings A and D to support the shaft. Calculations and checks are required to validate the design meets stress, wear, and reliability requirements.
Evaluation of thermal performance of a typical vapor compression refrigeratio...
This document describes an experiment conducted to evaluate the thermal performance of a typical vapor compression refrigeration cycle. The objectives were to learn about the components and analyze the cycle. Readings were taken of various temperatures and pressures. Calculations were done to determine compressor work, refrigeration effect, and coefficient of performance. Questions were asked about how to increase COP, the influence of temperatures, detecting refrigerant leaks, processes in the condenser, and functions of cycle components.
Refrigeration air conditioning laboratory Moist Air Properties and Air-Condi...
This document describes an experiment analyzing the properties of moist air using an air conditioning laboratory unit. Measurements of dry and wet bulb temperature were taken at different sections of the unit as air passed through a humidifying and preheating section and reheating section. The experimental results demonstrated how air conditioning processes can condition air to desired levels of temperature and humidity for occupant comfort regardless of external conditions. Calculations using psychrometric charts and equations were performed to determine air properties at each section.
Characteristics of a simply converging nozzle through which steam is passes
1. The document describes experiments conducted on converging and converging-diverging nozzles. It discusses the theory behind how these nozzles work and how properties like pressure and velocity change within the nozzles.
2. Calculations are shown for the mass flow rate through the nozzles under different pressure ratios. The critical pressure ratio where the nozzle becomes choked is also calculated.
3. Results show the mass flow rate and critical pressure ratio for two test cases of varying inlet pressures.
Power plant steam condenser
This document summarizes an experiment conducted on a steam condenser to evaluate its thermal operation under co-current and counter-current modes. It includes an abstract, introduction, apparatus description, calculations and results from testing the condenser under parallel and counter flow with constant pressure and steam flow rate. Charts show changes in temperature, heat transfer rate, efficiency and overall heat transfer coefficient for each test configuration.
Performance of the four strokes diesel engine
This document describes an experiment to study the performance of a four-stroke diesel engine at various speeds. It includes the objective to analyze the effect of speed on engine parameters. The document outlines the test procedure which involves taking readings like speed, torque, temperature and fuel consumption at different water flows through the dynamometer to vary the engine speed. Calculations are shown to determine values like power, efficiency, air-fuel ratio based on the experimental readings. Results are presented in a table for one engine speed setting as an example.
i.c engine
The document discusses internal combustion (I.C.) engines. It begins by outlining the objective of identifying types of I.C. engines, their parts, and how each part works. It then provides classifications of I.C. engines and lists their major components. The working principles of four-stroke and two-stroke engines are explained, including diagrams of their cycles. Key aspects covered are intake, compression, combustion, power and exhaust strokes in four-stroke engines and the use of crankcases and ports to enable intake and exhaust in two strokes.
Flow system control
This document describes an experiment on flow system control. The objectives are to obtain the system characteristics like peak overshoot, rise time, and settling time. It introduces PID controllers and discusses their proportional, integral and derivative modes. The theory section explains the transfer function of a PID controller and the effects of the P, I, and D terms. It also describes second-order system responses. The apparatus section lists the steps to operate the flow system and record the response. Calculations are shown to determine the system response based on the controller terms.
Control servo motors
This document describes an experiment performed on a DC motor to determine its steady state gain. Measurements were taken of the motor's angular velocity and input voltage over time. The steady state gain (Ks) was calculated from these measurements for both the motor and generator configurations. Ks was found to be 7.36356 rpm/V on average for the motor and 5.596616 rpm/V for the generator. A proportional relationship between voltage and angular velocity was observed from the plotted data. The DC motor model and experimental results showed some non-linear behavior, likely due to load and operating conditions.
Nozzles
1. The document discusses experiments performed on converging and converging-diverging nozzles.
2. Converging nozzles accelerate fluid flow to supersonic speeds at the nozzle exit, while converging-diverging nozzles can accelerate fluids to both subsonic and supersonic regimes depending on pressure ratios.
3. Calculations are shown for mass flow rates through a nozzle at different pressure ratios using theoretical equations.
performance of the four strokes diesel engine
This document describes an experiment to test the performance of a four-stroke diesel engine at varying speeds. It includes sections on the objective, engine performance, test procedure, calculations, results, and discussion. The objective is to study the effect of engine speed on performance parameters. The test procedure involves varying the engine speed using a water dynamometer and recording speed, torque, temperatures, and fuel consumption. Calculations are presented for power, specific fuel consumption, air-fuel ratio, efficiencies, and heat losses. Results are reported for two engine speeds.
Introduction about i.c engine
The document discusses internal combustion (I.C.) engines. It begins by identifying the objective of understanding I.C. engine types, parts, and how each part works. It then provides classifications of I.C. engines based on application, design, cycle, valves/ports, fuel type, ignition, combustion chamber, load control, and cooling. Details are given on common engine components and how four-stroke and two-stroke engines operate through intake, compression, power, and exhaust strokes. In conclusion, the document provides a discussion question about writing a short report on I.C. engines.
Flow system control
The document describes an experiment on flow system control using a PID controller. The objectives are to obtain the system characteristics like overshoot, rise time, settling time, period, and transport delay. It introduces PID controllers and how they work in a closed loop system using proportional, integral, and derivative modes. The apparatus section outlines the experimental setup, which uses a flow system with a square wave input and adjustable setpoint and proportional gain. Calculations are shown for analyzing the system response based on these parameters.
Using the convergent steam nozzle type in the entrance
This document discusses using a convergent steam nozzle in the entrance region of a steam turbine. It provides background on steam turbines and how they work, describing how steam is expanded through nozzles to convert heat energy to kinetic energy. It then discusses different types of steam nozzles, focusing on convergent nozzles, and how nozzle shape affects steam velocity and pressure distribution. A numerical simulation will be performed to analyze pressure and velocity within a simple convergent nozzle design.
Hybrid car Advanced vehicle technology
The document discusses different types of hybrid vehicles. It describes the key components of a gasoline-electric hybrid car, including a gasoline engine, fuel tank, electric motor, generator, batteries, and transmission. Hybrid vehicles are classified into three main types: micro hybrids, which have a motor to assist with starting and accessories; mild hybrids, which have a more powerful motor to support starting and provide supplementary torque; and full hybrids, where the electric motor can power the vehicle on its own as well as charge via regenerative braking.
Nonlinear integral control for dc motor speed control
This document discusses nonlinear integral control for DC motor speed control with unknown and variable external torque. It begins with an introduction to DC motors and common speed control techniques. It then provides the basic model of a DC motor and derives the transfer function. It discusses nonlinear control systems and elements like saturation, deadband, and friction. It describes methods for solving nonlinear transient responses, nonlinear system stability, and provides a Simulink model example comparing PI and P controller performance for speed and error. References for DC motor speed control and optimization of PI controllers are also provided.
Weak and strong oblique shock waves2
This document discusses Prandtl-Meyer expansion fans in compressible fluid flow. It begins with an example problem involving a flow with a Mach number of 3. It then derives the governing equations for Prandtl-Meyer expansion fans mathematically. Several examples are worked through demonstrating how to calculate flow properties after an expansion wave using the Prandtl-Meyer function. The document concludes by discussing the maximum turning angle achievable with an expansion fan and assigning homework problems.
Weak and strong oblique shock waves1
1) The document discusses oblique shock waves in compressible fluid flow, providing equations for continuity, momentum, and energy that must be satisfied across an oblique shock.
2) It derives an equation to relate the shock angle θ to the freestream Mach number M1 and wedge angle β, allowing calculation of flow properties downstream.
3) The total downstream Mach number M2 is expressed in terms of Mn2 and Mt2 using geometric arguments.
Oblique shock and expansion waves
This document presents explicit analytical solutions for pressure across oblique shock and expansion waves in supersonic flow. It begins by introducing the need for explicit pressure-deflection solutions in solving aerodynamic problems. It then presents:
1) Exact explicit solutions for pressure coefficient and ratio across weak and strong oblique shock waves as functions of deflection angle.
2) Third-order accurate explicit unitary solutions for pressure coefficient and ratio across oblique shocks and expansions as functions of deflection angle.
3) Numerical validation showing good agreement of the new explicit solutions with exact solutions for a range of Mach numbers and deflection angles.
Characteristics of shock reflection in the dual solution domain
This document summarizes a numerical study that investigated the effects of laser energy deposition on shock reflection transitions in supersonic flow. The study used computational fluid dynamics simulations to model laser energy being deposited in front of symmetrical wedges, creating a dual solution domain where different shock reflection patterns can occur. The results showed that laser energy deposition could induce transitions between regular and Mach shock reflections, and that the transition characteristics depended on the location and amount of energy deposited. Depositing more energy required more time for transition, and transition did not occur above a certain energy level or when depositing on the centerline.
Characteristics of shock reflection in the dual solution domain
This document summarizes a numerical study that investigates the use of laser energy deposition to induce transitions between regular and Mach shock reflections in supersonic flow over dual wedge configurations. The study validated its numerical approach by comparing results to an experiment involving laser deposition in front of a sphere. Simulations then examined how varying the position and amount of laser energy deposition could influence transition characteristics in the dual solution domain over wedge configurations. Key findings included how transition time and occurrence depended on deposition parameters and position relative to the shock waves and wedges.
Weak and strong oblique shock waves
This document summarizes research on oblique shock waves that appear in supersonic carbon dioxide two-phase flow, as occurs in ejector refrigeration cycles. It presents:
1) Theoretical analyses showing that two types of oblique shock waves can occur - weak shocks where flow remains supersonic, and strong shocks with large pressure recovery and subsonic flow.
2) An experiment using a carbon dioxide two-phase flow channel to observe these shock waves.
3) Equations governing compressible two-phase flow and the conditions under which strong and weak oblique shock waves form, to compare with experimental results.
The function of management should focus on getting people to work towards and...
The function of management should focus on getting people to work towards and achieve organizational goals and objectives. in short, management's primary purpose should be to increase
Steam generator-part-1
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Me6503 design-of-machine-elements-unit-ii-notes
The document discusses the benefits of exercise for both physical and mental health. It notes that regular exercise can reduce the risk of diseases like heart disease and diabetes, improve mood, and reduce feelings of stress and anxiety. Exercise is also said to boost brain health and function as we age by increasing blood flow and oxygen to the brain.
Stainless steel
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Superalloys
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
More Related Content
More from Saif al-din ali
Flow system control
This document describes an experiment on flow system control. The objectives are to obtain the system characteristics like peak overshoot, rise time, and settling time. It introduces PID controllers and discusses their proportional, integral and derivative modes. The theory section explains the transfer function of a PID controller and the effects of the P, I, and D terms. It also describes second-order system responses. The apparatus section lists the steps to operate the flow system and record the response. Calculations are shown to determine the system response based on the controller terms.
Control servo motors
This document describes an experiment performed on a DC motor to determine its steady state gain. Measurements were taken of the motor's angular velocity and input voltage over time. The steady state gain (Ks) was calculated from these measurements for both the motor and generator configurations. Ks was found to be 7.36356 rpm/V on average for the motor and 5.596616 rpm/V for the generator. A proportional relationship between voltage and angular velocity was observed from the plotted data. The DC motor model and experimental results showed some non-linear behavior, likely due to load and operating conditions.
Nozzles
1. The document discusses experiments performed on converging and converging-diverging nozzles.
2. Converging nozzles accelerate fluid flow to supersonic speeds at the nozzle exit, while converging-diverging nozzles can accelerate fluids to both subsonic and supersonic regimes depending on pressure ratios.
3. Calculations are shown for mass flow rates through a nozzle at different pressure ratios using theoretical equations.
performance of the four strokes diesel engine
This document describes an experiment to test the performance of a four-stroke diesel engine at varying speeds. It includes sections on the objective, engine performance, test procedure, calculations, results, and discussion. The objective is to study the effect of engine speed on performance parameters. The test procedure involves varying the engine speed using a water dynamometer and recording speed, torque, temperatures, and fuel consumption. Calculations are presented for power, specific fuel consumption, air-fuel ratio, efficiencies, and heat losses. Results are reported for two engine speeds.
Introduction about i.c engine
The document discusses internal combustion (I.C.) engines. It begins by identifying the objective of understanding I.C. engine types, parts, and how each part works. It then provides classifications of I.C. engines based on application, design, cycle, valves/ports, fuel type, ignition, combustion chamber, load control, and cooling. Details are given on common engine components and how four-stroke and two-stroke engines operate through intake, compression, power, and exhaust strokes. In conclusion, the document provides a discussion question about writing a short report on I.C. engines.
Flow system control
The document describes an experiment on flow system control using a PID controller. The objectives are to obtain the system characteristics like overshoot, rise time, settling time, period, and transport delay. It introduces PID controllers and how they work in a closed loop system using proportional, integral, and derivative modes. The apparatus section outlines the experimental setup, which uses a flow system with a square wave input and adjustable setpoint and proportional gain. Calculations are shown for analyzing the system response based on these parameters.
Using the convergent steam nozzle type in the entrance
This document discusses using a convergent steam nozzle in the entrance region of a steam turbine. It provides background on steam turbines and how they work, describing how steam is expanded through nozzles to convert heat energy to kinetic energy. It then discusses different types of steam nozzles, focusing on convergent nozzles, and how nozzle shape affects steam velocity and pressure distribution. A numerical simulation will be performed to analyze pressure and velocity within a simple convergent nozzle design.
Hybrid car Advanced vehicle technology
The document discusses different types of hybrid vehicles. It describes the key components of a gasoline-electric hybrid car, including a gasoline engine, fuel tank, electric motor, generator, batteries, and transmission. Hybrid vehicles are classified into three main types: micro hybrids, which have a motor to assist with starting and accessories; mild hybrids, which have a more powerful motor to support starting and provide supplementary torque; and full hybrids, where the electric motor can power the vehicle on its own as well as charge via regenerative braking.
Nonlinear integral control for dc motor speed control
This document discusses nonlinear integral control for DC motor speed control with unknown and variable external torque. It begins with an introduction to DC motors and common speed control techniques. It then provides the basic model of a DC motor and derives the transfer function. It discusses nonlinear control systems and elements like saturation, deadband, and friction. It describes methods for solving nonlinear transient responses, nonlinear system stability, and provides a Simulink model example comparing PI and P controller performance for speed and error. References for DC motor speed control and optimization of PI controllers are also provided.
Weak and strong oblique shock waves2
This document discusses Prandtl-Meyer expansion fans in compressible fluid flow. It begins with an example problem involving a flow with a Mach number of 3. It then derives the governing equations for Prandtl-Meyer expansion fans mathematically. Several examples are worked through demonstrating how to calculate flow properties after an expansion wave using the Prandtl-Meyer function. The document concludes by discussing the maximum turning angle achievable with an expansion fan and assigning homework problems.
Weak and strong oblique shock waves1
1) The document discusses oblique shock waves in compressible fluid flow, providing equations for continuity, momentum, and energy that must be satisfied across an oblique shock.
2) It derives an equation to relate the shock angle θ to the freestream Mach number M1 and wedge angle β, allowing calculation of flow properties downstream.
3) The total downstream Mach number M2 is expressed in terms of Mn2 and Mt2 using geometric arguments.
Oblique shock and expansion waves
This document presents explicit analytical solutions for pressure across oblique shock and expansion waves in supersonic flow. It begins by introducing the need for explicit pressure-deflection solutions in solving aerodynamic problems. It then presents:
1) Exact explicit solutions for pressure coefficient and ratio across weak and strong oblique shock waves as functions of deflection angle.
2) Third-order accurate explicit unitary solutions for pressure coefficient and ratio across oblique shocks and expansions as functions of deflection angle.
3) Numerical validation showing good agreement of the new explicit solutions with exact solutions for a range of Mach numbers and deflection angles.
Characteristics of shock reflection in the dual solution domain
This document summarizes a numerical study that investigated the effects of laser energy deposition on shock reflection transitions in supersonic flow. The study used computational fluid dynamics simulations to model laser energy being deposited in front of symmetrical wedges, creating a dual solution domain where different shock reflection patterns can occur. The results showed that laser energy deposition could induce transitions between regular and Mach shock reflections, and that the transition characteristics depended on the location and amount of energy deposited. Depositing more energy required more time for transition, and transition did not occur above a certain energy level or when depositing on the centerline.
Characteristics of shock reflection in the dual solution domain
This document summarizes a numerical study that investigates the use of laser energy deposition to induce transitions between regular and Mach shock reflections in supersonic flow over dual wedge configurations. The study validated its numerical approach by comparing results to an experiment involving laser deposition in front of a sphere. Simulations then examined how varying the position and amount of laser energy deposition could influence transition characteristics in the dual solution domain over wedge configurations. Key findings included how transition time and occurrence depended on deposition parameters and position relative to the shock waves and wedges.
Weak and strong oblique shock waves
This document summarizes research on oblique shock waves that appear in supersonic carbon dioxide two-phase flow, as occurs in ejector refrigeration cycles. It presents:
1) Theoretical analyses showing that two types of oblique shock waves can occur - weak shocks where flow remains supersonic, and strong shocks with large pressure recovery and subsonic flow.
2) An experiment using a carbon dioxide two-phase flow channel to observe these shock waves.
3) Equations governing compressible two-phase flow and the conditions under which strong and weak oblique shock waves form, to compare with experimental results.
The function of management should focus on getting people to work towards and...
The function of management should focus on getting people to work towards and achieve organizational goals and objectives. in short, management's primary purpose should be to increase
Steam generator-part-1
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Me6503 design-of-machine-elements-unit-ii-notes
The document discusses the benefits of exercise for both physical and mental health. It notes that regular exercise can reduce the risk of diseases like heart disease and diabetes, improve mood, and reduce feelings of stress and anxiety. Exercise is also said to boost brain health and function as we age by increasing blood flow and oxygen to the brain.
Stainless steel
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Superalloys
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
More from Saif al-din ali (20)
Using the convergent steam nozzle type in the entrance
Using the convergent steam nozzle type in the entrance
Nonlinear integral control for dc motor speed control
Nonlinear integral control for dc motor speed control
Characteristics of shock reflection in the dual solution domain
Characteristics of shock reflection in the dual solution domain
Characteristics of shock reflection in the dual solution domain
Characteristics of shock reflection in the dual solution domain
The function of management should focus on getting people to work towards and...
The function of management should focus on getting people to work towards and...
Recently uploaded
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaNew techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Recently uploaded (20)
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx