Thailand Reference Material (TRM) คือชื่อทางการค้าของวัสดุ
อ้างอิงรับรองที่ผลิตโดยสถาบันมาตรวิทยาแห่งชาติ หรือหน่วยงานอื่นภายในประเทศที่สถาบันมาตรวิทยาแห่งชาติมอบหมาย โดยกระบวนการผลิต TRM เป็นไปตามข้อกำหนด ISO 17034: General requirements for the competence of reference material producers และ ISO GUIDE 35:Reference materials-Guidance for characterization and assessment of homogeneity and stability TRM สามารถสอบกลับได้ทางมาตรวิทยา (Traceable) ไปยัง SI Units ซึ่งในทางเคมีคือ หน่วย Mole (mol) โดยผ่านการให้ค่าจากห้องปฏิบัติการสถาบันมาตรวิทยาแห่งชาติ ซึ่งได้ผ่านการเปรียบเทียบความสามารถในการวัดกับห้องปฏิบัติการสถาบันมาตรวิทยาแห่งชาติของประเทศที่ ได้รับการยอมรับในระดับนานาชาติเช่น สหรัฐอเมริกา เยอรมันนี และญี่ปุ่น เป็นต้น วัสดุอ้างอิงรับรองเป็นวัสดุหรือสารมาตรฐานที่มีความเป็นเนื้อเดียว มีความเสถียรและมีใบรับรองค่าของคุณสมบัติที่เราสนใจ พร้อมแสดงค่าความไม่แน่นอนของผลการวัดและระบุการสอบกลับได้ของผลการวัดวัสดุอ้างอิง/วัสดุอ้างอิงรับรองเป็นส่วนหนึ่งที่มีความสำคัญต่อห้องปฏิบัติการวิเคราะห์และทดสอบ ใช้สำหรับ 1) สอบเทียบเครื่องมือ 2) ตรวจสอบความใช้ได้/ยืนยันความถูกต้องของวิธีทดสอบ และ 3) ควบคุมคุณภาพของวิธีการทดสอบ ทำให้ห้องปฏิบัติการของประเทศไทยสามารถวิเคราะห์ทดสอบได้อย่างถูกต้องและมีคุณภาพตามมาตรฐานตามระบบสากล
The document discusses the importance of illuminance meters having an accurate spectral response that matches the CIE luminous efficiency function V(λ). The author participated in a training program in Thailand on photometry standards. He conducted an experiment at NPLI where standard detectors and detectors from commercial luxmeters were tested behind blue and red filters. Ratios of the detector responses (R/B ratio) with the filters were calculated and compared. Standard detectors produced R/B ratios from 0.25 to 0.35, matching CIE values based on their spectral match. Commercial luxmeter detectors showed scattered R/B ratios, indicating they were not corrected for V(λ). The author concludes all luxmeters should have a V(λ)
A Fully Automatic Multimeter Calibration SystemNIMT
The document describes a fully automatic multimeter calibration system using a programmable switch. Key points:
1) A programmable switch was designed to automatically reconfigure cables for calibration without manual intervention.
2) The switch was inserted into an automatic calibration system to calibrate a multimeter.
3) Results showed the automatic system calibrated the multimeter as accurately as the manual system, reducing calibration time from 35 to 25 minutes.
1. Torque is a measure of rotational force and is important in many engineering applications. Regular calibration of torque tools is necessary to ensure accuracy and traceability to standards.
2. Hand torque tools are commonly used in research, inspections, and production. The document outlines standards for calibrating and classifying hand torque tools.
3. Torque wrench calibration devices must also be calibrated regularly according to standards. Participants calibrated a torque transducer using a torque wrench as the standard and prepared calibration procedures.
Basic Principles of Radiation Thermometry and Thermometer CalibrationsNIMT
This document provides an overview of radiation thermometry and calibration of radiation thermometers. It begins with definitions of blackbody radiation and emissivity. It then describes the components and design considerations of spectral radiation thermometers. The document discusses factors to consider for non-contact temperature measurements such as suitable target-sensor distance. It also covers detector types, advantages of radiation thermometers, and common calibration methods including fixed point calibration and spectral responsivity measurement. Finally, it identifies uncertainty sources that can affect the accuracy of radiation thermometer calibrations.
Summary Report of the TCTP on Strengthening of Measurement Standards Institut...NIMT
The Third Country Training Programme on Strengthening of Measurement Standards Institutes of Asia Pacific Countries was held from January 16 to February 24, 2012 in Thailand. Twenty counterparts from 11 countries received training in 5 measurement standards including angle, photometry, radiation thermometry, RF, and torque standards. In addition to technical training, the counterparts participated in training on teamwork and cultural activities like a visit to Chang Island and a night show. All counterparts cooperated well during the intensive schedule and produced calibration certificates and procedures, demonstrating their commitment to applying the skills learned back in their home countries.
CCQM-K81 : Measurement of Chloramphenicol in Pig MuscleNIMT
This document summarizes a key comparison study for the determination of chloramphenicol in pig muscle conducted by the National Institute of Metrology, Thailand (NIMT). The study involved analysis of lyophilized pig muscle samples containing chloramphenicol at around the EU's maximum residue level of 0.3 μg/kg. NIMT used isotope dilution mass spectrometry with an in-house assessed chloramphenicol standard for quantification, and sample preparation involved extraction, solid phase extraction cleanup, and analysis by liquid chromatography-tandem mass spectrometry. NIMT's results were included in the calculation of the key comparison reference value.