งานสอน ดอกเจาะผายปาก
•Download as PPTX, PDF•
1 like•712 views
This document discusses various tools used for drilling and preparing holes. It explains that a center punch and center drill are used to mark and create an indentation for starting a drill. Countersinking uses a countersink drill bit to create an angled hole for a countersunk screw head to sit flush with the surface. Counterboring enlarges a hole to allow for a bolt head or nut to sit below the surface. Reaming finishes and sizes holes to the desired diameter for a tight press fit of parts like bolts or rivets.
Report
Share
Report
Share
Recommended
Work Precedure for Front standard
The work procedure outlines the steps for manufacturing a front standard part using various tools over 45 minutes. Key steps include loading the bottom assembly into a vice, drilling holes using a manual mill while changing drill bits as needed, loosening set screws to remove the top plate, and using a hand tap to thread holes before removing the finished part. Safety equipment like eye protection and gloves are required.
Publication1
1) The document examines chip formation when drilling AISI 316L stainless steel using uncoated carbide twist drills. Drilling experiments were conducted at different cutting speeds (18 and 30 mm/min) and feed rates (0.03, 0.045, and 0.06 mm/rev).
2) Tight helix spiral chips formed at lower cutting speeds and feed rates, while loose helix and long ribbon chips formed at higher cutting speeds. Higher feed rates also produced long ribbon chips, indicating more severe wear on the drill.
3) The conclusions recommend using a cutting speed below 30 mm/min and feed rate of 0.03 mm/rev or lower when drilling AISI 316L
Managing the digital data deluge - special libraries
Managing the digital data deluge - an issue facing special libraries. Presentation to ALIAWest for the F.A. Sharr Medal 2013.
MET 103 Reamers 103
A reamer is a rotary cutting tool used to enlarge previously drilled or bored holes to accurate dimensions. There are several types of reamers including machine reamers like rose chucking and fluted chucking reamers, and hand reamers made of high-speed steel or carbon steel. Proper reaming techniques involve using the correct speed and feed rate, applying a cutting fluid, and avoiding practices like letting the reamer chatter or turning it backward.
Reamers
This document provides specifications for various types of reamers including:
- Parallel hand reamers with dimensions ranging from 3mm to 19mm diameter and details on cutting edge length and overall length.
- Long flute machine reamers with dimensions from 3mm to 26mm diameter, cutting edge length, overall length, and Morse taper shank number.
- Machine jig reamers with dimensions from 6mm to 24mm diameter, cutting edge length, overall length, and Morse taper shank number.
Ketogenic Diet KEN Clients testimonial.
Proud to introduce for the first time in India, KEN™ (Ketogenic Enteral Nutrition) a revolutionary safe method for fat loss. Clients can expect to lose 6% to 9% of their body weight without losing any lean body mass within 10 days of treatment while comfortably going about their daily life.
Kamaraj Memorial Hall,
Basement - 498/500, Anna Salai,
Teynamepet, Chennai- 06
www.aiwo.com
www.weightlossin10days.com
Ph: 044 - 2433 5916 / 95000 65656 / 96770 17772
For more content go to http://www.aiwo.com
Facebook Link: http://www.facebook.com/aiwolimited
Twitter Link: http://www.twitter.com/Ketogenic_Diet
Blog Link: http://www.kentherapy.blogspot.in
Youtube Link: http://www.youtube.com/aiwolimited
Linked IN Link: http://www.linkedin.com/company/aiwo-limited
Website Link: http://www.www.aiwo.com
Link: http://www.www.weightlossin10days.com
Tumblr Link: http://www.kentherapy-aiwo.tumblr.com
Friend Feed Link: http://www.friendfeed.com/kendiet
Diigo Link: http://www.diigo.com/profile/weightloss-aiwo
Myspace Link: http://www.myspace.com/weightlossin10days
Delicious Link: http://www.delicious.com/aiwolimited
Stumble Upon Link: http://www.stumbleupon.com/stumbler/aiwoken
Pininterest Link: http://www.pinterest.com/KENTHERAPY
Wordpress Blog Link: http://www.weightlossin10days.wordpress.com
Hi5 Link: http://www.hi5.com/aiwoken
PORTFOLIO (Manufacturing Engineering)
This document contains summaries and samples from David Diaz's portfolio as a mechanical engineer. It includes examples of job travelers and process mapping used for manufacturing. It also outlines a new kanban system developed for replacing paper boxes in a copy room. The kanban system uses cards to track the replacement process and ensure all necessary information is available at each step. Markings on the back of the cards allow tracking of progress through completion.
Tool Holding Devices For Milling
This document discusses different tool holding devices for milling machines. It describes drill chucks, which are the most common for holding straight-shank cutting tools and contain three jaws that move simultaneously when the outer sleeve is turned. Collets are also discussed, which hold workpieces or cutting tools in a milling machine spindle. Tapping heads are described as self-reversing mechanisms that allow controlled feed for tapping holes. Finally, arbors are defined as cutter holding devices with tapered shanks that fit in the machine spindle and can mount multiple cutters for milling operations.
Recommended
Work Precedure for Front standard
The work procedure outlines the steps for manufacturing a front standard part using various tools over 45 minutes. Key steps include loading the bottom assembly into a vice, drilling holes using a manual mill while changing drill bits as needed, loosening set screws to remove the top plate, and using a hand tap to thread holes before removing the finished part. Safety equipment like eye protection and gloves are required.
Publication1
1) The document examines chip formation when drilling AISI 316L stainless steel using uncoated carbide twist drills. Drilling experiments were conducted at different cutting speeds (18 and 30 mm/min) and feed rates (0.03, 0.045, and 0.06 mm/rev).
2) Tight helix spiral chips formed at lower cutting speeds and feed rates, while loose helix and long ribbon chips formed at higher cutting speeds. Higher feed rates also produced long ribbon chips, indicating more severe wear on the drill.
3) The conclusions recommend using a cutting speed below 30 mm/min and feed rate of 0.03 mm/rev or lower when drilling AISI 316L
Managing the digital data deluge - special libraries
Managing the digital data deluge - an issue facing special libraries. Presentation to ALIAWest for the F.A. Sharr Medal 2013.
MET 103 Reamers 103
A reamer is a rotary cutting tool used to enlarge previously drilled or bored holes to accurate dimensions. There are several types of reamers including machine reamers like rose chucking and fluted chucking reamers, and hand reamers made of high-speed steel or carbon steel. Proper reaming techniques involve using the correct speed and feed rate, applying a cutting fluid, and avoiding practices like letting the reamer chatter or turning it backward.
Reamers
This document provides specifications for various types of reamers including:
- Parallel hand reamers with dimensions ranging from 3mm to 19mm diameter and details on cutting edge length and overall length.
- Long flute machine reamers with dimensions from 3mm to 26mm diameter, cutting edge length, overall length, and Morse taper shank number.
- Machine jig reamers with dimensions from 6mm to 24mm diameter, cutting edge length, overall length, and Morse taper shank number.
Ketogenic Diet KEN Clients testimonial.
Proud to introduce for the first time in India, KEN™ (Ketogenic Enteral Nutrition) a revolutionary safe method for fat loss. Clients can expect to lose 6% to 9% of their body weight without losing any lean body mass within 10 days of treatment while comfortably going about their daily life.
Kamaraj Memorial Hall,
Basement - 498/500, Anna Salai,
Teynamepet, Chennai- 06
www.aiwo.com
www.weightlossin10days.com
Ph: 044 - 2433 5916 / 95000 65656 / 96770 17772
For more content go to http://www.aiwo.com
Facebook Link: http://www.facebook.com/aiwolimited
Twitter Link: http://www.twitter.com/Ketogenic_Diet
Blog Link: http://www.kentherapy.blogspot.in
Youtube Link: http://www.youtube.com/aiwolimited
Linked IN Link: http://www.linkedin.com/company/aiwo-limited
Website Link: http://www.www.aiwo.com
Link: http://www.www.weightlossin10days.com
Tumblr Link: http://www.kentherapy-aiwo.tumblr.com
Friend Feed Link: http://www.friendfeed.com/kendiet
Diigo Link: http://www.diigo.com/profile/weightloss-aiwo
Myspace Link: http://www.myspace.com/weightlossin10days
Delicious Link: http://www.delicious.com/aiwolimited
Stumble Upon Link: http://www.stumbleupon.com/stumbler/aiwoken
Pininterest Link: http://www.pinterest.com/KENTHERAPY
Wordpress Blog Link: http://www.weightlossin10days.wordpress.com
Hi5 Link: http://www.hi5.com/aiwoken
PORTFOLIO (Manufacturing Engineering)
This document contains summaries and samples from David Diaz's portfolio as a mechanical engineer. It includes examples of job travelers and process mapping used for manufacturing. It also outlines a new kanban system developed for replacing paper boxes in a copy room. The kanban system uses cards to track the replacement process and ensure all necessary information is available at each step. Markings on the back of the cards allow tracking of progress through completion.
Tool Holding Devices For Milling
This document discusses different tool holding devices for milling machines. It describes drill chucks, which are the most common for holding straight-shank cutting tools and contain three jaws that move simultaneously when the outer sleeve is turned. Collets are also discussed, which hold workpieces or cutting tools in a milling machine spindle. Tapping heads are described as self-reversing mechanisms that allow controlled feed for tapping holes. Finally, arbors are defined as cutter holding devices with tapered shanks that fit in the machine spindle and can mount multiple cutters for milling operations.
CAD & Analysis Introduction
This document provides an overview of a computer aided design engineering course. The course aims to align analytical and computational techniques to streamline the engineering design and manufacturing process. Key learning outcomes include using software like Mathcad and Creo for modeling, simulation and documentation. Design methodologies, CAD, rapid prototyping and team projects are covered. The course is graded based on assignments using the various software packages and a final team project.
Surface grinding and accessories
This document provides information on various grinding processes and techniques. It discusses how grinding works by abrasive grains on the wheel removing chips of metal from the workpiece. It also outlines general rules for grinding, types of surface grinding machines, workholding methods like magnetic chucks, grinding wheel care procedures, balancing wheels, and uses of grinding fluids.
Thermoforming (MIT 2.008x Lecture Slides)
Slides accompanying 2.008x* video module on Thermoforming, Prof. John Hart, MIT, 2016.
*Fundamentals of Manufacturing Processes on edX: https://www.edx.org/course/fundamentals-manufacturing-processes-mitx-2-008x
Sugar plant design
The slide show presents a preliminary literature study for a sugar plant design. Hop you will get something valuable out of it....:)
Extrusion
The document discusses the extrusion manufacturing process. Extrusion involves forcing a block of metal through a die to create solid or hollow shapes. There are different types of extrusion classified by direction (direct, indirect), operating temperature (hot, cold), and equipment (horizontal, vertical). Hot extrusion is done at high temperatures using lubrication while cold extrusion is done at room temperature. The document also discusses defects, drawing as a related process, and factors that affect extrusion forces.
Theory of metal cutting-module II
1. The document discusses thermal aspects of machining including cutting temperatures, tool materials, tool wear, and cutting fluids.
2. Cutting temperatures can reach up to 6000C at the tool-chip interface and have a controlling influence on tool wear and friction.
3. High cutting temperatures reduce tool life, pose safety hazards to hot chips, and can cause workpiece inaccuracies due to thermal expansion.
Bending
1. The document discusses sheet metal forming processes including shearing, bending, and springback. It provides definitions and formulas for calculating forces in shearing and springback in bending.
2. An lab experiment is described that involves bending aluminum strips using a finger brake machine and measuring the resulting bend radii and angles to analyze springback.
3. Finite element analysis simulations are shown illustrating the deformation during bending and springback.
non traditional machining
This document summarizes key concepts in traditional machining processes. It discusses chip formation, types of chips, tool geometry including rake angle, tool wear, cutting parameters such as depth of cut and step over distance, recommended feeds and speeds, factors that affect machinability, and power and force calculations. Examples are provided to demonstrate how to estimate cutting speeds, feeds, and power requirements for different machining operations and materials.
Theory of-metal-cutting
This document contains lecture notes on manufacturing processes and metal cutting theory. It begins with definitions of manufacturing and an overview of various manufacturing processes. It then describes machine tools and their functions in metal cutting. Key sections cover classifications of manufacturing processes, cutting parameters like speed, feed and depth of cut, and characteristics and types of cutting tools materials. In summary, the document provides a comprehensive introduction to manufacturing processes, metal cutting theory, and machine tools.
Sugar manufacturing process
This document provides an overview of the sugarcane processing and sugar production process. It details each step from harvesting sugarcane to processing it in sugar mills to extract the juice, and then refining the juice to produce raw and refined sugar. The key steps involve crushing the sugarcane, extracting and clarifying the juice, evaporating and crystallizing it to produce raw sugar, and then further processing the raw sugar through affination, melting, purification and recrystallization to produce refined white sugar. Factors like temperature, moisture, light and compression are important for proper storage of sugar.
Basic hydraulics
Hydraulics today has become a way of life as most applications have some form of system ingrained. This paper is an endevor to present the very basics of hydraulics and overcome its basic fear.
Word Formation in English
The document discusses different aspects of word formation in English including prefixation, suffixation, and compounding. It provides examples of various prefixes, suffixes, and compound words in English and categorizes them based on their meaning or function. It also briefly discusses the evolution of English dictionaries and different types of lexicography.
Sales management By Rajiv P. Kumar (Buddhist)
The document discusses various concepts related to sales management and personal selling. It defines sales management as planning, directing, and controlling personal selling activities. It describes the importance of sales management in generating revenue. It also discusses theories of selling like AIDA and buying decision processes. Key steps in the personal selling process are prospecting, pre-approach, approach, presentation, overcoming objections, and follow-up. Sales forecasting methods include survey, expert opinion, statistical techniques, and trend analysis. Determining the optimal sales force size is important to maximize sales while controlling costs.
Types of Irrigation
1. Irrigation is the artificial supply of water to crops through methods like surface, sprinkler, and drip irrigation. Surface irrigation involves distributing water over the soil surface by gravity in techniques like basin, border, and furrow irrigation.
2. Sprinkler irrigation applies water similar to rainfall through pipes and sprinklers. Drip irrigation drips water slowly from pipes and emitters directly to plant roots.
3. The suitable irrigation method depends on factors like soil type, crop type, technology, costs and previous experience. Surface irrigation is common on loamy and clay soils while sprinkler and drip are more suitable for sandy soils with low water storage.
Drilling
Drilling is a cutting process that uses a rotating drill bit to cut a hole through solid materials. The drill bit cuts chips of material from the workpiece as it rotates at high speeds. Precise hole placement requires establishing a centering mark on the workpiece before drilling begins.
Drill bit- A Review
Drill bits are cutting tools used to create cylindrical holes. They are held in a chuck and rotate to provide torque and force. Specialized bits can create non-cylindrical holes. Common drilling operations include reaming to enlarge holes, tapping to cut internal threads, counterboring, and countersinking. Twist drill bits are the most commonly used type and have a cylindrical shaft and helical flutes.
Different tools used in workshop
the pronunciation of the technical name of of different tools available in workshop is important for engineer.
Carpen tools
This document provides an overview of carpentry tools and safe practices. It describes common tools used for marking, holding, planning, cutting, drilling, boring, and miscellaneous tasks. Marking tools include steel rules, marking gauges, try squares, and scribers. Holding tools include vices, C-clamps, and bar cramps. Planning tools include jack planes, smoothing planes, rebate planes, and plough planes. Cutting tools include various saws, chisels, and firmer, dovetail, and mortise chisels. Drilling tools include braces, auger bits, hand drills, and gimlets. Miscellaneous tools include mallets, pincers, hamm
foundary workshop complete manufacturing practic
This document provides information about foundry tools and the sand casting process. It lists and describes 18 common hand tools used in foundry operations such as mold making. It also discusses key foundry terms like flasks, patterns, parting lines, pouring basins, sprues, runners, risers, gates, cores, chaplets and vents. The document introduces the sand casting process and explains that sand casting is simple in concept but demanding to execute as it is hazardous and energy-intensive.
Wood working or Wood work shop
Woodworking tools can be used for measuring, marking, cutting, shaping, and joining wood. Common tools include steel rules for straight edge measuring, measuring tapes for long distances, try squares for marking 90 and 45 degree angles, calipers for measuring distances between sides, and wood files, chisels, and saws for removing material. Wood can be joined using butt joints, dowel joints, mortise and tenon joints, dovetail joints, and mitre joints.
Workshop practice i
The lecturer notes of workshop practice 1 give the basic skills on carpentry tools and working procedures in carpentry workshop. Enjoy it !!
Wt4603 unit4 week5_03-10-2011
This document provides information on safety practices and equipment for circular saws and routers. It discusses hazards associated with these machines and risk control measures. Specific topics covered include circular saw machine maintenance, saw blade terminology such as hook angle and tooth configuration, riving knife specifications, and table slot dimensions. The notes were prepared by Mr. Joseph Lyster for his WT4603 Wood Processing Safety & Practice course at UL and are available online.
More Related Content
Viewers also liked
CAD & Analysis Introduction
This document provides an overview of a computer aided design engineering course. The course aims to align analytical and computational techniques to streamline the engineering design and manufacturing process. Key learning outcomes include using software like Mathcad and Creo for modeling, simulation and documentation. Design methodologies, CAD, rapid prototyping and team projects are covered. The course is graded based on assignments using the various software packages and a final team project.
Surface grinding and accessories
This document provides information on various grinding processes and techniques. It discusses how grinding works by abrasive grains on the wheel removing chips of metal from the workpiece. It also outlines general rules for grinding, types of surface grinding machines, workholding methods like magnetic chucks, grinding wheel care procedures, balancing wheels, and uses of grinding fluids.
Thermoforming (MIT 2.008x Lecture Slides)
Slides accompanying 2.008x* video module on Thermoforming, Prof. John Hart, MIT, 2016.
*Fundamentals of Manufacturing Processes on edX: https://www.edx.org/course/fundamentals-manufacturing-processes-mitx-2-008x
Sugar plant design
The slide show presents a preliminary literature study for a sugar plant design. Hop you will get something valuable out of it....:)
Extrusion
The document discusses the extrusion manufacturing process. Extrusion involves forcing a block of metal through a die to create solid or hollow shapes. There are different types of extrusion classified by direction (direct, indirect), operating temperature (hot, cold), and equipment (horizontal, vertical). Hot extrusion is done at high temperatures using lubrication while cold extrusion is done at room temperature. The document also discusses defects, drawing as a related process, and factors that affect extrusion forces.
Theory of metal cutting-module II
1. The document discusses thermal aspects of machining including cutting temperatures, tool materials, tool wear, and cutting fluids.
2. Cutting temperatures can reach up to 6000C at the tool-chip interface and have a controlling influence on tool wear and friction.
3. High cutting temperatures reduce tool life, pose safety hazards to hot chips, and can cause workpiece inaccuracies due to thermal expansion.
Bending
1. The document discusses sheet metal forming processes including shearing, bending, and springback. It provides definitions and formulas for calculating forces in shearing and springback in bending.
2. An lab experiment is described that involves bending aluminum strips using a finger brake machine and measuring the resulting bend radii and angles to analyze springback.
3. Finite element analysis simulations are shown illustrating the deformation during bending and springback.
non traditional machining
This document summarizes key concepts in traditional machining processes. It discusses chip formation, types of chips, tool geometry including rake angle, tool wear, cutting parameters such as depth of cut and step over distance, recommended feeds and speeds, factors that affect machinability, and power and force calculations. Examples are provided to demonstrate how to estimate cutting speeds, feeds, and power requirements for different machining operations and materials.
Theory of-metal-cutting
This document contains lecture notes on manufacturing processes and metal cutting theory. It begins with definitions of manufacturing and an overview of various manufacturing processes. It then describes machine tools and their functions in metal cutting. Key sections cover classifications of manufacturing processes, cutting parameters like speed, feed and depth of cut, and characteristics and types of cutting tools materials. In summary, the document provides a comprehensive introduction to manufacturing processes, metal cutting theory, and machine tools.
Sugar manufacturing process
This document provides an overview of the sugarcane processing and sugar production process. It details each step from harvesting sugarcane to processing it in sugar mills to extract the juice, and then refining the juice to produce raw and refined sugar. The key steps involve crushing the sugarcane, extracting and clarifying the juice, evaporating and crystallizing it to produce raw sugar, and then further processing the raw sugar through affination, melting, purification and recrystallization to produce refined white sugar. Factors like temperature, moisture, light and compression are important for proper storage of sugar.
Basic hydraulics
Hydraulics today has become a way of life as most applications have some form of system ingrained. This paper is an endevor to present the very basics of hydraulics and overcome its basic fear.
Word Formation in English
The document discusses different aspects of word formation in English including prefixation, suffixation, and compounding. It provides examples of various prefixes, suffixes, and compound words in English and categorizes them based on their meaning or function. It also briefly discusses the evolution of English dictionaries and different types of lexicography.
Sales management By Rajiv P. Kumar (Buddhist)
The document discusses various concepts related to sales management and personal selling. It defines sales management as planning, directing, and controlling personal selling activities. It describes the importance of sales management in generating revenue. It also discusses theories of selling like AIDA and buying decision processes. Key steps in the personal selling process are prospecting, pre-approach, approach, presentation, overcoming objections, and follow-up. Sales forecasting methods include survey, expert opinion, statistical techniques, and trend analysis. Determining the optimal sales force size is important to maximize sales while controlling costs.
Types of Irrigation
1. Irrigation is the artificial supply of water to crops through methods like surface, sprinkler, and drip irrigation. Surface irrigation involves distributing water over the soil surface by gravity in techniques like basin, border, and furrow irrigation.
2. Sprinkler irrigation applies water similar to rainfall through pipes and sprinklers. Drip irrigation drips water slowly from pipes and emitters directly to plant roots.
3. The suitable irrigation method depends on factors like soil type, crop type, technology, costs and previous experience. Surface irrigation is common on loamy and clay soils while sprinkler and drip are more suitable for sandy soils with low water storage.
Viewers also liked (14)
Similar to งานสอน ดอกเจาะผายปาก
Drilling
Drilling is a cutting process that uses a rotating drill bit to cut a hole through solid materials. The drill bit cuts chips of material from the workpiece as it rotates at high speeds. Precise hole placement requires establishing a centering mark on the workpiece before drilling begins.
Drill bit- A Review
Drill bits are cutting tools used to create cylindrical holes. They are held in a chuck and rotate to provide torque and force. Specialized bits can create non-cylindrical holes. Common drilling operations include reaming to enlarge holes, tapping to cut internal threads, counterboring, and countersinking. Twist drill bits are the most commonly used type and have a cylindrical shaft and helical flutes.
Different tools used in workshop
the pronunciation of the technical name of of different tools available in workshop is important for engineer.
Carpen tools
This document provides an overview of carpentry tools and safe practices. It describes common tools used for marking, holding, planning, cutting, drilling, boring, and miscellaneous tasks. Marking tools include steel rules, marking gauges, try squares, and scribers. Holding tools include vices, C-clamps, and bar cramps. Planning tools include jack planes, smoothing planes, rebate planes, and plough planes. Cutting tools include various saws, chisels, and firmer, dovetail, and mortise chisels. Drilling tools include braces, auger bits, hand drills, and gimlets. Miscellaneous tools include mallets, pincers, hamm
foundary workshop complete manufacturing practic
This document provides information about foundry tools and the sand casting process. It lists and describes 18 common hand tools used in foundry operations such as mold making. It also discusses key foundry terms like flasks, patterns, parting lines, pouring basins, sprues, runners, risers, gates, cores, chaplets and vents. The document introduces the sand casting process and explains that sand casting is simple in concept but demanding to execute as it is hazardous and energy-intensive.
Wood working or Wood work shop
Woodworking tools can be used for measuring, marking, cutting, shaping, and joining wood. Common tools include steel rules for straight edge measuring, measuring tapes for long distances, try squares for marking 90 and 45 degree angles, calipers for measuring distances between sides, and wood files, chisels, and saws for removing material. Wood can be joined using butt joints, dowel joints, mortise and tenon joints, dovetail joints, and mitre joints.
Workshop practice i
The lecturer notes of workshop practice 1 give the basic skills on carpentry tools and working procedures in carpentry workshop. Enjoy it !!
Wt4603 unit4 week5_03-10-2011
This document provides information on safety practices and equipment for circular saws and routers. It discusses hazards associated with these machines and risk control measures. Specific topics covered include circular saw machine maintenance, saw blade terminology such as hook angle and tooth configuration, riving knife specifications, and table slot dimensions. The notes were prepared by Mr. Joseph Lyster for his WT4603 Wood Processing Safety & Practice course at UL and are available online.
Hand saws
Back saws, such as tenon saws and dovetail saws, have a steel or brass back that gives them weight for sawing wood easily. A tenon saw is used for general sawing and cutting mortise and tenon joints, while a dovetail saw cuts joints like dovetails. Coping saws cut unusual shapes and curves and require practice to control. The blade is inserted by flexing the frame and springs back into place to hold the blade. A coping saw can also cut internal shapes by passing the blade through a drilled hole first.
TYPES OF TOOLS
This document summarizes several common hand tools used for woodworking joints:
- Coping saws cut intricate shapes and interior cutouts. Block planes efficiently slice end grain and remove thin shavings. Chisels cut wood when struck with a mallet. Jack planes perform some tasks of smoothing and jointer planes on smaller works. Marking knives and combination squares lay out angles and lines for cutting. Saws cut through wood by pushing and pulling blades. Marking gauges scribe lines parallel to edges for joinery.
carpentary-220410034454.pdf
This document provides information about carpentry tools and woodworking joints. It discusses various tools used in carpentry like rulers, try squares, marking gauges, saws, planes, mallets and wood lathes. It explains different types of saws such as crosscut saws, rip saws, backsaws and dovetail saws. It also describes common woodworking joints like halving joints, mortise and tenon joints, housing joints, corner joints, dowel joints and bridle joints.
Carpentary.pptx
This document provides information about carpentry tools and woodworking joints. It discusses various tools used in carpentry like rulers, try squares, marking gauges, saws, planes, mallets and wood lathes. It explains different types of saws including crosscut saws, rip saws, backsaws, compass saws and dovetail saws. It also describes common woodworking joints like halving joints, mortise and tenon joints, housing joints, corner joints, dowel joints and bridle joints.
Deck-Lounger-Plan
This three sentence summary provides the essential information about the Luxury Lounger document:
The document provides instructions for building a reclining deck lounger that can be enjoyed after completion. Despite using dimension lumber, the lounger has a refined appearance through techniques like half-lap joints and curved profiles cut with a template. The lounger reclines in four positions and is designed to fit standard lounge chair cushions once assembled from lumber, screws, and wheels.
Break down bow
This document provides instructions for making a takedown recurve bow. It lists the necessary tools and materials, which include a youth bow kit, wood, metal plates and screws. It then provides 18 steps to assemble the bow, including cutting the limbs to length, drilling holes to attach the limbs to the wooden riser grip, and adding metal plates and screws to connect the limbs securely while allowing them to be detached. The final steps include stringing the bow and making a carrying case.
carpentry shop .pptx
This document provides instructions and information on tools and equipment used in a carpentry shop. It describes various measuring, marking, holding, cutting, planning, boring, drilling, striking, and miscellaneous tools. It also covers woodworking lathe machines and their parts. Specific joints like mortise and tenon and jobs are outlined, along with procedures, required materials and tools. Safety precautions for operating tools in the carpentry shop are also listed.
carpentary-220410034454.pptx
This document provides information about carpentry tools and woodworking joints. It discusses various tools used in carpentry like rulers, try squares, marking gauges, saws, planes, mallets and wood lathes. It explains different types of saws including crosscut saws, rip saws, backsaws, compass saws and dovetail saws. It also describes common woodworking joints like halving joints, mortise and tenon joints, housing joints, corner joints, dowel joints and bridle joints.
Similar to งานสอน ดอกเจาะผายปาก (16)
Recently uploaded
Leonardo DiCaprio House: A Journey Through His Extravagant Real Estate Portfolio
Introduction
Leonardo DiCaprio, A name synonymous with Hollywood excellence. is not only known for his stellar acting career but also for his impressive real estate investments. The "Leonardo DiCaprio house" is a topic that piques the interest of many. as the Oscar-winning actor has amassed a diverse portfolio of luxurious properties. DiCaprio's homes reflect his varied tastes and commitment to sustainability. from retreats to historic mansions. This article will delve into the fascinating world of Leonardo DiCaprio's real estate. Exploring the details of his most notable residences. and the unique aspects that make them stand out.
Follow us on: Pinterest
Leonardo DiCaprio House: Malibu Beachfront Retreat
A Prime Location
His Malibu beachfront house is one of the most famous properties in Leonardo DiCaprio's real estate portfolio. Situated in the exclusive Carbon Beach. also known as "Billionaire's Beach," this property boasts stunning ocean views and private beach access. The "Leonardo DiCaprio house" in Malibu is a testament to the actor's love for the sea and his penchant for luxurious living.
Architectural Highlights
The Malibu house features a modern design with clean lines, large windows. and open spaces blending indoor and outdoor living. The expansive deck and patio areas provide ample space for entertaining guests or enjoying a quiet sunset. The house has state-of-the-art amenities. including a gourmet kitchen, a home theatre, and many guest suites.
Sustainable Features
Leonardo DiCaprio is a well-known environmental activist. whose Malibu house reflects his commitment to sustainability. The property incorporates solar panels, energy-efficient appliances, and sustainable building materials. The landscaping around the house is also designed to be water-efficient. featuring drought-resistant plants and intelligent irrigation systems.
Leonardo DiCaprio House: Hollywood Hills Hideaway
Privacy and Seclusion
Another remarkable property in Leonardo DiCaprio's collection is his Hollywood Hills house. This secluded retreat offers privacy and tranquility. making it an ideal escape from the hustle and bustle of Los Angeles. The "Leonardo DiCaprio house" in Hollywood Hills nestled among lush greenery. and offers panoramic views of the city and surrounding landscapes.
Design and Amenities
The Hollywood Hills house is a mid-century modern gem characterized by its sleek design and floor-to-ceiling windows. The open-concept living space is perfect for entertaining. while the cozy bedrooms provide a comfortable retreat. The property also features a swimming pool, and outdoor dining area. and a spacious deck that overlooks the cityscape.
Environmental Initiatives
The Hollywood Hills house incorporates several green features that are in line with DiCaprio's environmental values. The home has solar panels, energy-efficient lighting, and a rainwater harvesting system. Additionally, the landscaping designed to support local wildlife and promote
原版制作(MUN毕业证书)纽芬兰纪念大学毕业证PDF成绩单一模一样
学校原件一模一样【微信：741003700 】《(MUN毕业证书)纽芬兰纪念大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
定制(uow毕业证书)卧龙岗大学毕业证文凭学位证书原版一模一样
原版一模一样【微信：741003700 】【(uow毕业证书)卧龙岗大学毕业证文凭学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Authenticity in Motion Pictures: How Steve Greisen Retains Real Stories
Learn about Steve Greisen's dedication to capture the spirit of his subjects in his documentaries with honesty and integrity.
Orpah Winfrey Dwayne Johnson: Titans of Influence and Inspiration
Introduction
In the realm of entertainment, few names resonate as Orpah Winfrey Dwayne Johnson. Both figures have carved unique paths in the industry. achieving unparalleled success and becoming iconic symbols of perseverance, resilience, and inspiration. This article delves into the lives, careers. and enduring legacies of Orpah Winfrey Dwayne Johnson. exploring how their journeys intersect and what we can learn from their remarkable stories.
Follow us on: Pinterest
Early Life and Backgrounds
Orpah Winfrey: From Humble Beginnings to Media Mogul
Orpah Winfrey, often known as Oprah due to a misspelling on her birth certificate. was born on January 29, 1954, in Kosciusko, Mississippi. Raised in poverty by her grandmother, Winfrey's early life was marked by hardship and adversity. Despite these challenges. she demonstrated a keen intellect and an early talent for public speaking.
Winfrey's journey to success began with a scholarship to Tennessee State University. where she studied communication. Her first job in media was as a co-anchor for the local evening news in Nashville. This role paved the way for her eventual transition to talk show hosting. where she found her true calling.
Dwayne Johnson: From Wrestling Royalty to Hollywood Superstar
Dwayne Johnson, also known by his ring name "The Rock," was born on May 2, 1972, in Hayward, California. He comes from a family of professional wrestlers, with both his father, Rocky Johnson. and his grandfather, Peter Maivia, being notable figures in the wrestling world. Johnson's early life was spent moving between New Zealand and the United States. experiencing a variety of cultural influences.
Before entering the world of professional wrestling. Johnson had aspirations of becoming a professional football player. He played college football at the University of Miami. where he was part of a national championship team. But, injuries curtailed his football career, leading him to follow in his family's footsteps and enter the wrestling ring.
Career Milestones
Orpah Winfrey: The Queen of All Media
Winfrey's career breakthrough came in 1986 when she launched "The Oprah Winfrey Show." The show became a cultural phenomenon. drawing millions of viewers daily and earning many awards. Winfrey's empathetic and candid interviewing style resonated with audiences. helping her tackle diverse and often challenging topics.
Beyond her talk show, Winfrey expanded her empire to include the creation of Harpo Productions. a multimedia production company. She also launched "O, The Oprah Magazine" and OWN: Oprah Winfrey Network, further solidifying her status as a media mogul.
Dwayne Johnson: From The Ring to The Big Screen
Dwayne Johnson's wrestling career took off in the late 1990s. when he became one of the most charismatic and popular figures in WWE. His larger-than-life persona and catchphrases endeared him to fans. making him a household name. But, Johnson had ambitions beyond the wrestling ring.
In the early 20
Anasuya Sengupta Cannes 2024 Award Winner
Anasuya Sengupta, an Indian actress and designer, won the Best Actress Award at the Cannes Film Festival for the Bulgarian film 'The Shameless'.
From Teacher to OnlyFans: Brianna Coppage's Story at 28
At 28, Brianna Coppage left her teaching career to become an OnlyFans content creator. This bold move into digital entrepreneurship allowed her to harness her creativity and build a new identity. Brianna's experience highlights the intersection of technology and personal branding in today's economy.
The Future of Independent Filmmaking Trends and Job Opportunities
The landscape of independent filmmaking is evolving at an unprecedented pace. Technological advancements, changing consumer preferences, and new distribution models are reshaping the industry, creating new opportunities and challenges for filmmakers and film industry jobs. This article explores the future of independent filmmaking, highlighting key trends and emerging job opportunities.
University of Western Sydney degree offer diploma Transcript
澳洲UWS毕业证书制作西悉尼大学假文凭定制Q微168899991做UWS留信网教留服认证海牙认证改UWS成绩单GPA做UWS假学位证假文凭高仿毕业证申请西悉尼大学University of Western Sydney degree offer diploma Transcript
From Swing Music to Big Band Fame_ 5 Iconic Artists.pptx
Know about the five famous artists who have transitioned to Big Band Music from Swing Music. Here is a glimpse of their work and contributions.
Everything You Need to Know About IPTV Ireland.pdf
The way we consume television has evolved dramatically over the past decade. Internet Protocol Television (IPTV) has emerged as a popular alternative to traditional cable and satellite TV, offering a wide range of channels and on-demand content via the internet. In Ireland, IPTV is rapidly gaining traction, with Xtreame HDTV being one of the prominent providers in the market. This comprehensive guide will delve into everything you need to know about IPTV Ireland, focusing on Xtreame HDTV, its features, benefits, and how it is revolutionizing TV viewing for Irish audiences.
The Evolution of the Leonardo DiCaprio Haircut: A Journey Through Style and C...
Leonardo DiCaprio, a name synonymous with Hollywood stardom and acting excellence. has captivated audiences for decades with his talent and charisma. But, the Leonardo DiCaprio haircut is one aspect of his public persona that has garnered attention. From his early days as a teenage heartthrob to his current status as a seasoned actor and environmental activist. DiCaprio's hairstyles have evolved. reflecting both his personal growth and the changing trends in fashion. This article delves into the many phases of the Leonardo DiCaprio haircut. exploring its significance and impact on pop culture.
一比一原版(AUT毕业证)奥克兰理工大学毕业证如何办理
AUT毕业证假文凭【微信95270640】购买（奥克兰理工大学毕业证成绩单硕士学历）Q微信95270640代办AUT学历认证留信网伪造奥克兰理工大学学位证书精仿奥克兰理工大学本科/硕士文凭证书补办奥克兰理工大学 diplomaoffer,Transcript购买奥克兰理工大学毕业证成绩单购买AUT假毕业证学位证书购买伪造奥克兰理工大学文凭证书学位证书,专业办理雅思、托福成绩单，学生ID卡，在读证明，海外各大学offer录取通知书，毕业证书，成绩单，文凭等材料:1:1完美还原毕业证、offer录取通知书、学生卡等各种在读或毕业材料的防伪工艺（包括 烫金、烫银、钢印、底纹、凹凸版、水印、防伪光标、热敏防伪、文字图案浮雕，激光镭射，紫外荧光，温感光标）学校原版上有的工艺我们一样不会少，不论是老版本还是最新版本，都能保证最高程度还原，力争完美以求让所有同学都能享受到完美的品质服务。
办国外奥克兰理工大学奥克兰理工大学毕业证文凭证书教育部学历学位认证留信认证大使馆认证留学回国人员证明修改成绩单信封申请学校offer录取通知书在读证明offer letter。
快速办理高仿国外毕业证成绩单：
1奥克兰理工大学毕业证+成绩单+留学回国人员证明+教育部学历认证（全套留学回国必备证明材料给父母及亲朋好友一份完美交代）;
2雅思成绩单托福成绩单OFFER在读证明等留学相关材料（申请学校转学甚至是申请工签都可以用到）。
3.毕业证 #成绩单等全套材料从防伪到印刷从水印到钢印烫金高精仿度跟学校原版100%相同。
专业服务请勿犹豫联系我！联系人微信号：95270640诚招代理：本公司诚聘当地代理人员如果你有业余时间有兴趣就请联系我们。
国外奥克兰理工大学奥克兰理工大学毕业证文凭证书办理过程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。蜿蜒小溪一直都是山娃和小伙伴们盛夏的天然泳场水不深碎石底石缝里总有摸不尽的鱼虾活蹦乱跳的还有乌龟和王八贼头贼脑的倒也逗人喜爱日上三竿时山娃总爱窜进自家瓜棚里跟小伙伴们坐着聊天聊着聊着便忍不住往瓜田里逡巡一番抱起一只硕大的西瓜用石刀劈开抑或用拳头砸开每人抱起一大块就啃啃得满嘴满脸猴屁股般的红艳大家一个劲地指着对方吃吃地笑瓜裂得古怪奇形怪状却丝毫不影响瓜味甜丝丝的满嘴生津遍地都是瓜横七竖八的活像掷满这
DIGIDEVTV A New area of OTT Distribution
At Digidev, we are working to be the leader in interactive streaming platforms of choice by smart device users worldwide.
Our goal is to become the ultimate distribution service of entertainment content. The Digidev application will offer the next generation television highway for users to discover and engage in a variety of content. While also providing a fresh and
innovative approach towards advertainment with vast revenue opportunities. Designed and developed by Joe Q. Bretz
Christian Louboutin: Innovating with Red Soles
Christian Louboutin is celebrated for his innovative approach to footwear design, marked by his trademark red soles. This in-depth look at his life and career explores the origins of his creativity, the milestones in his journey, and the impact of his work on the fashion industry. Learn how Louboutin's bold vision and dedication to excellence have made his brand synonymous with luxury and style.
Abraham Laboriel Records ‘The Bass Walk’ at Evergreen Stage
A legendary musician records an intricate song designed to show off his expert bass guitar chops at a historical Los Angeles studio.
The Gallery of Shadows, In the heart of a bustling city
In the heart of a bustling city, hidden away from the modern chaos …
created with AI assistance…
The Enigmatic Portrait, In the heart of a sleepy town
In the heart of a sleepy town nestled between rolling hills and whispering pines …
created with AI assistance…
Divertidamente SLIDE muito lindo e criativo, pptx
Slide criativo e muito lindo, apenas editar, muito simples
Top IPTV UK Providers of A Comprehensive Review.pdf
The television landscape in the UK has evolved significantly with the rise of Internet Protocol Television (IPTV). IPTV offers a modern alternative to traditional cable and satellite TV, allowing viewers to stream live TV, on-demand videos, and other multimedia content directly to their devices over the internet. This review provides an in-depth look at the top IPTV UK providers, their features, pricing, and what sets them apart.
Recently uploaded (20)
Leonardo DiCaprio House: A Journey Through His Extravagant Real Estate Portfolio
Leonardo DiCaprio House: A Journey Through His Extravagant Real Estate Portfolio
Authenticity in Motion Pictures: How Steve Greisen Retains Real Stories
Authenticity in Motion Pictures: How Steve Greisen Retains Real Stories
Orpah Winfrey Dwayne Johnson: Titans of Influence and Inspiration
Orpah Winfrey Dwayne Johnson: Titans of Influence and Inspiration
From Teacher to OnlyFans: Brianna Coppage's Story at 28
From Teacher to OnlyFans: Brianna Coppage's Story at 28
The Future of Independent Filmmaking Trends and Job Opportunities
The Future of Independent Filmmaking Trends and Job Opportunities
University of Western Sydney degree offer diploma Transcript
University of Western Sydney degree offer diploma Transcript
From Swing Music to Big Band Fame_ 5 Iconic Artists.pptx
From Swing Music to Big Band Fame_ 5 Iconic Artists.pptx
Everything You Need to Know About IPTV Ireland.pdf
Everything You Need to Know About IPTV Ireland.pdf
The Evolution of the Leonardo DiCaprio Haircut: A Journey Through Style and C...
The Evolution of the Leonardo DiCaprio Haircut: A Journey Through Style and C...
Abraham Laboriel Records ‘The Bass Walk’ at Evergreen Stage
Abraham Laboriel Records ‘The Bass Walk’ at Evergreen Stage
The Gallery of Shadows, In the heart of a bustling city
The Gallery of Shadows, In the heart of a bustling city
The Enigmatic Portrait, In the heart of a sleepy town
The Enigmatic Portrait, In the heart of a sleepy town
Top IPTV UK Providers of A Comprehensive Review.pdf
Top IPTV UK Providers of A Comprehensive Review.pdf
งานสอน ดอกเจาะผายปาก
- 1. Center Punch Center Drill Drill Counter Sink Counter Bore Reamer
- 4.
- 5.
- 6. (DRILLS)
- 7. Screws)
- 8. (COUNTERSINKING) When a screw is driven into a piece of wood, it sometimes doesn’t matter that the head of the screw is sticking up out of the wood. Sometimes it matters a lot and it has to be avoided. When this is the case, a countersunk screw is used. The special shape of the head allows it to go ‘flush’ with the surface of the wood. To work best of all, the hole should be prepared for the screwhead to fit into it. It is prepared using a countersink drill bit in the manner shown below. The head of the countersunk screw will now fit snugly into the prepared hole a countersunk hole This is the countersink drill bit which is placed in the chuck of the drilling machine and produces the angled hole which makes the countersink. Notice how the head of the countersunk screw is ‘flush’ with the surface of the wood.
- 9. (Drill)
- 10. (Rivet)
- 16. (Counter Bore)
- 20. 1/3
- 22. (Reamer)
- 24. (REAMER) (Fit and Tolerance) • (Straight Flutes) • (Spiral Flutes) 208281 Workshop Practice Created by Prateep Chaisermtawan
- 25. REAMER (Hand Reamer) - (taper sleeve) 208281 Workshop Practice Created by Prateep Chaisermtawan
- 26. (Machine Reamer) 2.1 (Jobber’s Reamer) 2.2 (Chucking Reamer) 2.4 (Expansion Chucking Reamer) 2.3 (Rose Reamer) 2.5 (Shell Reamer) 208281 Workshop Practice Created by Prateep Chaisermtawan
- 27.
- 28.
- 29. 0.05