some_implementations_Piotr_Nieoczym
•
0 likes•423 views
The document describes several industrial control system projects that Piotr Nieoczym has worked on, including systems for water treatment and beer distribution in Nigeria, medical waste incineration, copper transport, and gas cleaning for various smelting and power generation facilities. The control systems involved PLCs from manufacturers like Siemens and Schneider, along with SCADA systems and hundreds to thousands of I/O points. Piotr's roles included PLC programming, electrical work, SCADA development, and commissioning of the completed projects.
Report
Share
Report
Share
Download to read offline
Recommended
Serinus 10-ozone-o3-gas-analyser
The Serinus 10 Ozone (O3) analyser delivers precise and reliable performance at excellent value. It uses proven non-dispersive ultraviolet (UV) absorption technology to measure O3 in ambient air (LDL < 0.5 ppb, range 0 – 20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Day 11 eigrp
http://www.cyberintelligents.in
info@cyberintelligents.in
https://www.facebook.com/cyberintelligents
https://in.linkedin.com/in/cyberintelligents/en
https://cyberintelligents.wordpress.com/
http://cyberintelligent.blogspot.in
+91 9876162698 +919988288019
http://trainingcyberintelligents.blogspot.com
https://cyberintelligentsnews.wordpress.com/
Wireless Valve Monitoring System From Rotork
Rotork RI Wireless is a revolutionary concept for wireless valve monitoring and diagnostics in the process industry. The field proven solution transmits real-time position indication to the control room and enables predictive maintenance for actuated valves, delivering capital and operating expenditure reduction, increased safety and increased productivity.
Automatic Voltage Range (AVR) - Sollatek
The document describes an automatic voltage regulator (AVR) product line from Sollatek.
- It provides voltage regulation for applications from small domestic units up to large industrial 500kVA installations, regulating voltage within ±4% accuracy.
- The AVR uses microprocessor control for fast 1250 Volts/second correction and reliability compared to mechanical regulators.
Power distribution solutions
This document provides information on Rittal Ri4Power power distribution solutions, including:
- Ri4Power offers structured low-voltage switchgear solutions up to 5500A for applications in buildings, infrastructure, process industry, industrial plants, and energy generation.
- The Ri4Power Form 2-4 system allows for configurable low-voltage switchgear with inner form separation using modular field types to optimize configurations for different applications.
- Ri4Power systems are type-tested according to international standards and designed to provide a high level of operator safety through extensive busbar insulation and compartmentalization to prevent accidental arc occurrences.
Digital valve positioner for industrial process control valves
The document provides information on the Flowserve Logix 3200IQ digital positioner. It describes the positioner's features such as its QUICK-CAL button, DIP switches, and LED status indicators which allow for quick setup and calibration. It also details its communication capabilities via HART protocol and compatibility with SoftTools configuration software. The positioner uses piezo technology and a 32-bit microprocessor to provide precise control and diagnostics of control valves.
IGS-1600T Gigabit Ethernet Switch
IGS-1600T Industrial high-density 16-port 10/100/1000T Gigabit Ethernet Switch is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-1600T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
IVC-234GT Industrial 1-Port BNC/RJ11 to 4-Port Gigabit Ethernet Extender
IVC-234GT Industrial 1-Port BNC/RJ11 to 4-Port Gigabit Ethernet ExtenderBluBoxx Communication Pvt. ltd
Industrial Ethernet Extender, IVC-234GT. It features one BNC port and one RJ11 port for long-distance connection with the VDSL2 (Very-high-bit-rate Digital Subscriber Line 2) technology, and 4 10/100/1000BASE-T RJ45 Ethernet ports. Its slim-sized metal housing makes the placement of the unit convenient.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.inRecommended
Serinus 10-ozone-o3-gas-analyser
The Serinus 10 Ozone (O3) analyser delivers precise and reliable performance at excellent value. It uses proven non-dispersive ultraviolet (UV) absorption technology to measure O3 in ambient air (LDL < 0.5 ppb, range 0 – 20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Day 11 eigrp
http://www.cyberintelligents.in
info@cyberintelligents.in
https://www.facebook.com/cyberintelligents
https://in.linkedin.com/in/cyberintelligents/en
https://cyberintelligents.wordpress.com/
http://cyberintelligent.blogspot.in
+91 9876162698 +919988288019
http://trainingcyberintelligents.blogspot.com
https://cyberintelligentsnews.wordpress.com/
Wireless Valve Monitoring System From Rotork
Rotork RI Wireless is a revolutionary concept for wireless valve monitoring and diagnostics in the process industry. The field proven solution transmits real-time position indication to the control room and enables predictive maintenance for actuated valves, delivering capital and operating expenditure reduction, increased safety and increased productivity.
Automatic Voltage Range (AVR) - Sollatek
The document describes an automatic voltage regulator (AVR) product line from Sollatek.
- It provides voltage regulation for applications from small domestic units up to large industrial 500kVA installations, regulating voltage within ±4% accuracy.
- The AVR uses microprocessor control for fast 1250 Volts/second correction and reliability compared to mechanical regulators.
Power distribution solutions
This document provides information on Rittal Ri4Power power distribution solutions, including:
- Ri4Power offers structured low-voltage switchgear solutions up to 5500A for applications in buildings, infrastructure, process industry, industrial plants, and energy generation.
- The Ri4Power Form 2-4 system allows for configurable low-voltage switchgear with inner form separation using modular field types to optimize configurations for different applications.
- Ri4Power systems are type-tested according to international standards and designed to provide a high level of operator safety through extensive busbar insulation and compartmentalization to prevent accidental arc occurrences.
Digital valve positioner for industrial process control valves
The document provides information on the Flowserve Logix 3200IQ digital positioner. It describes the positioner's features such as its QUICK-CAL button, DIP switches, and LED status indicators which allow for quick setup and calibration. It also details its communication capabilities via HART protocol and compatibility with SoftTools configuration software. The positioner uses piezo technology and a 32-bit microprocessor to provide precise control and diagnostics of control valves.
IGS-1600T Gigabit Ethernet Switch
IGS-1600T Industrial high-density 16-port 10/100/1000T Gigabit Ethernet Switch is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-1600T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
IVC-234GT Industrial 1-Port BNC/RJ11 to 4-Port Gigabit Ethernet Extender
IVC-234GT Industrial 1-Port BNC/RJ11 to 4-Port Gigabit Ethernet ExtenderBluBoxx Communication Pvt. ltd
Industrial Ethernet Extender, IVC-234GT. It features one BNC port and one RJ11 port for long-distance connection with the VDSL2 (Very-high-bit-rate Digital Subscriber Line 2) technology, and 4 10/100/1000BASE-T RJ45 Ethernet ports. Its slim-sized metal housing makes the placement of the unit convenient.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.inUnit 9 system install_pwr_point
The document outlines the process for installing a Cray Research computer system, including reassembling equipment, verifying startup, and preparing for operations. It also discusses considerations for site selection and designing the computer room to meet specifications for air quality, temperature, humidity and other environmental factors. Support equipment rooms must also maintain proper environments. Electrical power requirements and specifications for cooling systems, water supply, equipment separation and a raised floor are covered.
Serinus 50-so2-gas-analyser
The Serinus 50 Sulfur Dioxide (SO2) analyser delivers precise and reliable performance at excellent value. It uses proven pulsed UV fluorescent radiation technology to measure SO2 in ambient air (LDL <0.3 ppb, Range 0-20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Nidec asi service dry ice blasting
This document discusses dry ice blasting for cleaning electric motors. It provides information on periodic maintenance programs for motors, risks associated with different ambient conditions, and the principles and process of dry ice blasting. Case studies are presented showing the benefits of dry ice blasting for cleaning motor components like stators and rotors, including reduced downtime, improved insulation measurements, and elimination of contaminants. The document concludes that dry ice blasting is a powerful, reliable, and beneficial cleaning technique.
4-1
This document outlines manufacturing, performance, and regulatory standards for LED luminaires. It includes standards for quality (ISO9001, ISO14001), lighting performance (IES LDT, LM-79, LM-80), construction (EN/IEC60598, EN/IEC62471), drivers (EN/IEC61347), electromagnetic compatibility (EN55015), and environmental compliance (RoHS, IEC62321). It also provides specifications for two LED luminaire models including power, lumens, beam angle, and electrical characteristics.
GSW-2824P Combo Ethernet Switch
GSW-2824P is equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports, 2 extra Gigabit TP ports and 2 1000BASE-X SFP combo interfaces with the inner power system. With a total of 250 watts of PoE budget, it features high-performance Gigabit IEEE 802.3af PoE (up to 15.4W) and IEEE 802.3at PoE+ (up to 32W) capabilities on all ports.
Perfectly Integrated Solution for IP PoE Camera and NVR System
Particularly designed for the growing popular IP Surveillance applications, the GSW-2824P 802.3at PoE Switch is positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
IGS-5227-6T Industrial Managed Ethernet Switch
IGS-5227-6T Industrial Managed Ethernet Switch comes with an IP67-rated industrial case, 6-port 10/100/1000T, and static Layer 3 routing, providing a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets.
The IGS-5227-6T can be easily mounted on a DIN rail or wall taking up less space. It provides a quick, safe, cost-effective and high-performance network solution to IP security surveillance for small businesses and enterprises.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
Gas leakage alarm
This document summarizes a student project on providing uninterrupted power supply from four different sources - solar, mains, generator, and inverter. The project uses a microcontroller to automatically select the power supply source based on availability to ensure continuous power. It describes the objectives, components, circuit diagram, working principle, advantages and applications of the system. The system is able to switch power smoothly between the four sources to prevent power outages.
Mva mono y-un50_00
Split system with R410a gas and condensation control, consisting of an outdoor unit and an Low-head Ducted or High-head Ducted (horizontal installation) indoor unit. The outdoor unit uses DC inverter technology on both the fans and the compressors. The compressors are rotary. System operation is managed via microprocessor adjustment on non-polarised serial in CAN BUS protocol. The wired panel and infrared remote control are always supplied as standard with the indoor unit. A WRCS wired panel with integrated external contact is also available.
Iccr presentatie 2015
Erik Verhoeven has worked in the drum welding industry since 1979 and founded Arplas Welding BVBA in 2003. Arplas develops new drum welding technologies like the SyncronAC welder controller in 2003 which provides significant power savings over traditional controllers. Modern Arplas welders also have technological advantages like drawn copper conductors, belt-driven components, and touch screen computers that improve efficiency and quality over older designs. Arplas has installed over 120 SyncronAC controllers on drum welders worldwide and continues developing technologies to improve weld quality and reduce production costs for customers.
IGS-6325-24P4S Industrial Managed Ethernet Switch
IGS-6325-24P4S L3 Industrial Managed PoE+ Switch, featuring 24 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and 4 shared SFP ports in a 1U case.
It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 OSPFv2 dynamic routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
Unit 9 system install_pwr_point
The document provides guidance on installing a Cray Research computer system, including positioning support equipment in designated locations, reassembling the system, and verifying startup. It outlines considerations for site selection such as power quality, air quality, cooling water quality, and vibration sources. The computer room design must address personnel safety, air quality, future equipment plans, seismic activity, and accessibility. Computer equipment and support equipment each require specific temperature, humidity, and cleanliness conditions. Electrical power, cooling water supply, equipment separation, and a raised, static-dissipative floor must also meet certain standards for successful system installation.
Kollmorgen akmh datasheet rev-b_en-us
Kollmorgen has developed a new line of hygienic stainless steel washdown motors called the AKMH for use in demanding hygienic environments. The AKMH is designed to withstand rigorous washdown regimens with IP69K construction and corrosion resistant 316L stainless steel materials. It allows for quick cleaning without covers or guards. Testing showed the AKMH can reduce cleaning time by 50%, extend product life by 300%, and increase equipment uptime by 30%. The AKMH meets stringent industry guidelines for hygienic design and food safety. It is available in 19 sizes to replace air or hydraulic components with a clean, reliable servo motor solution.
Iccr presentatie 2015
Erik Verhoeven has worked in drum welding since 1979 and founded Arplas Welding BVBA in 2003. Arplas develops new drum welding technologies like the SyncronAC welder controller from 2003 that provides power savings up to 15% over older systems. Modern Arplas welders also have advantages like touch screens, belt drives, and thermal shrink electrodes. Arplas has installed over 140 welding systems worldwide and continues developing technologies to improve weld quality and reduce production costs.
IGS-6325-8UP2S Industrial Managed Ethernet Switch
IGS-6325-8UP2S2X L3 Industrial Managed PoE++ Switch features eight 10/100/1000BASE-T 802.3bt PoE++ ports with each port powering up to 95 watts and two 100/1000/2500BASE-X SFP interfaces in a rugged IP30 metal case for stable operation in heavy industrial demanding environments.
It supports rich PoE operation modes including 90-watt 802.3bt type-4 PoE++ ports, 95-watt PoH (Power over HD-BASE-T) mode and 4-pair force mode to solve the incompatibility of non-standard 4-pair PoE PDs in the field.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
IGS-6325-24P4X Industrial Managed Ethernet Switch
This document provides an overview and description of the IGS-6325-24P4X and IGS-6325-24P4S industrial managed switches. The switches provide 24 Gigabit Ethernet ports that support PoE+, 4 SFP/SFP+ ports, layer 3 routing, quality of service, security features, and management functions. They are suitable for applications including surveillance, transportation, building automation, and energy.
AccuThermo AW 410 Rapid Thermal Processing Equipment
The AccuThermo AW410 was derived from the AG Associates 610 production-proven design. Allwin21 Corp. is the exclusive manufacturer of the AG Associates Heatpulse 610 desktop atmospheric RTP (Rapid Thermal Processing) system. The system uses high intensity visible radiation to heat single wafer for short process periods of time at precisely controlled temperatures. The process periods are typically 1 600 seconds in duration, although periods of up to 9999 seconds can be selected. These capabilities, combined with the heating chamber's cold-wall design and superior heating uniformity, provide significant advantages over conventional furnace processing.
AccuThermo AW 410 Applications:
Silicon-dielectric growth
Implant annealing
Glass reflow
Silicides formation and annealing
Contact alloying
Nitridation of metals
Oxygen-donor annihilation
Other heat treatment process
AccuThermo AW 410 Typical Application Areas:
Chip manufacture
Compound industry: GaAs,GaN,GaP,GaINP,InP,SiC, III-V,II-VI
Optronics, Planar optical waveguides, Lasers
Nanotechnology
Biomedical
Battery
MEMS
Solar
LED
AccuThermo AW 410 Key Features:
35 years’ production-proven real RTP/RTA/RTO/RTN system.
Scattered IR light by special gold plated Al chamber surface.
Allwin21 advanced Software package with real time control technologies and many useful functions.
Consistent wafer-to-wafer process cycle repeatability.
Top and bottom High-intensity visible radiation Tungsten halogen lamp heating for fast heating rates with good repeatability performance and long lamp lifetime.
Cooling N2 (Or CDA) flows around the lamps and quartz isolation tube for fast cooling rates
Elimination of external contamination by Isolated Quartz Tube
Up to six gas lines with MFCs and shut-off valves
Energy efficient.
Small Footprint.
Made in U.S.A.
Application overview
Industrial UPS systems are commonly found in power generation, transmission, and distribution facilities to provide backup power for critical processes and systems. They are also used in oil and gas applications across upstream, midstream, and downstream facilities. Typical uses include powering control systems, safety equipment, monitoring devices, and telecommunications infrastructure. Around 80% of UPS usage in industrial settings is for automation and electrical balance of plant systems that must remain powered for continuous operations.
Nidec asi ship to shore connection for navy base
Nidec ASI provided frequency conversion systems for a new Italian Navy base in Taranto. The systems included 10 motor-generator sets that convert 50Hz power from land to 60Hz for ships, as well as excitation systems and medium voltage switchboards. The rotating converter systems each contain a 3000kVA synchronous motor and generator rigidly coupled to change frequencies. Nidec ASI's systems help power the new, more efficient Taranto naval base.
Herramientas de ensamble Ingersoll Rand
The document is a catalog for assembly tools from Ingersoll Rand that includes electric screwdrivers and fastening tools. It provides specifications for various models of electric screwdrivers including torque range, speed, weight and dimensions. It also lists accessories such as balancers and bits that can be used with the screwdrivers. The catalog describes features of the screwdriver models such as adjustable torque control, ergonomic designs, and ESD protection for electronics assembly. It indicates that Ingersoll Rand tools provide precise torque and speed control for assembly applications.
IGS-4215-4P4T Industrial Managed Switch
Industrial-grade, DIN-rail type L2/L4 Managed Gigabit PoE+ Switch featuring intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 4 10/100/1000BASE-T ports featuring 30-watt 802.3at PoE+ and 4 additional Gigabit copper ports.
The IGS-4215-4P4T is able to operate reliably , stably and quietly in any environment without affecting its performance. It comes with a total power budget of up to 144 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
AGE TECHNOLOGIES_2014 project briefs
The document discusses an automation project for a brewery involving temperature control of fermentation tanks. AGE Technologies was commissioned to design and implement a control system using Modicon PLCs and a SCADA system to monitor temperatures, control glycine valves and manage the operating modes of each tank. Key features included graphical tank status displays, temperature and process logging, and alarm annunciation. The project scope involved three PLC control systems networked via Ethernet with an overview SCADA system.
ES Europe Frunze
Sumy Frunze NPO is a private company established in 1896 that provides integrated solutions for the oil, gas, and power industries. It has manufacturing facilities in Ukraine and branch offices in Russia, Ukraine, Turkmenistan, and Azerbaijan. Sumy Frunze NPO designs, manufactures, and installs a wide range of process equipment including compressors, pumps, valves, and more. It also offers complete turnkey solutions and services for projects in industries such as oil and gas production, processing, transportation, power generation, and chemicals.
More Related Content
What's hot
Unit 9 system install_pwr_point
The document outlines the process for installing a Cray Research computer system, including reassembling equipment, verifying startup, and preparing for operations. It also discusses considerations for site selection and designing the computer room to meet specifications for air quality, temperature, humidity and other environmental factors. Support equipment rooms must also maintain proper environments. Electrical power requirements and specifications for cooling systems, water supply, equipment separation and a raised floor are covered.
Serinus 50-so2-gas-analyser
The Serinus 50 Sulfur Dioxide (SO2) analyser delivers precise and reliable performance at excellent value. It uses proven pulsed UV fluorescent radiation technology to measure SO2 in ambient air (LDL <0.3 ppb, Range 0-20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Nidec asi service dry ice blasting
This document discusses dry ice blasting for cleaning electric motors. It provides information on periodic maintenance programs for motors, risks associated with different ambient conditions, and the principles and process of dry ice blasting. Case studies are presented showing the benefits of dry ice blasting for cleaning motor components like stators and rotors, including reduced downtime, improved insulation measurements, and elimination of contaminants. The document concludes that dry ice blasting is a powerful, reliable, and beneficial cleaning technique.
4-1
This document outlines manufacturing, performance, and regulatory standards for LED luminaires. It includes standards for quality (ISO9001, ISO14001), lighting performance (IES LDT, LM-79, LM-80), construction (EN/IEC60598, EN/IEC62471), drivers (EN/IEC61347), electromagnetic compatibility (EN55015), and environmental compliance (RoHS, IEC62321). It also provides specifications for two LED luminaire models including power, lumens, beam angle, and electrical characteristics.
GSW-2824P Combo Ethernet Switch
GSW-2824P is equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports, 2 extra Gigabit TP ports and 2 1000BASE-X SFP combo interfaces with the inner power system. With a total of 250 watts of PoE budget, it features high-performance Gigabit IEEE 802.3af PoE (up to 15.4W) and IEEE 802.3at PoE+ (up to 32W) capabilities on all ports.
Perfectly Integrated Solution for IP PoE Camera and NVR System
Particularly designed for the growing popular IP Surveillance applications, the GSW-2824P 802.3at PoE Switch is positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
IGS-5227-6T Industrial Managed Ethernet Switch
IGS-5227-6T Industrial Managed Ethernet Switch comes with an IP67-rated industrial case, 6-port 10/100/1000T, and static Layer 3 routing, providing a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets.
The IGS-5227-6T can be easily mounted on a DIN rail or wall taking up less space. It provides a quick, safe, cost-effective and high-performance network solution to IP security surveillance for small businesses and enterprises.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
Gas leakage alarm
This document summarizes a student project on providing uninterrupted power supply from four different sources - solar, mains, generator, and inverter. The project uses a microcontroller to automatically select the power supply source based on availability to ensure continuous power. It describes the objectives, components, circuit diagram, working principle, advantages and applications of the system. The system is able to switch power smoothly between the four sources to prevent power outages.
Mva mono y-un50_00
Split system with R410a gas and condensation control, consisting of an outdoor unit and an Low-head Ducted or High-head Ducted (horizontal installation) indoor unit. The outdoor unit uses DC inverter technology on both the fans and the compressors. The compressors are rotary. System operation is managed via microprocessor adjustment on non-polarised serial in CAN BUS protocol. The wired panel and infrared remote control are always supplied as standard with the indoor unit. A WRCS wired panel with integrated external contact is also available.
Iccr presentatie 2015
Erik Verhoeven has worked in the drum welding industry since 1979 and founded Arplas Welding BVBA in 2003. Arplas develops new drum welding technologies like the SyncronAC welder controller in 2003 which provides significant power savings over traditional controllers. Modern Arplas welders also have technological advantages like drawn copper conductors, belt-driven components, and touch screen computers that improve efficiency and quality over older designs. Arplas has installed over 120 SyncronAC controllers on drum welders worldwide and continues developing technologies to improve weld quality and reduce production costs for customers.
IGS-6325-24P4S Industrial Managed Ethernet Switch
IGS-6325-24P4S L3 Industrial Managed PoE+ Switch, featuring 24 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and 4 shared SFP ports in a 1U case.
It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 OSPFv2 dynamic routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
Unit 9 system install_pwr_point
The document provides guidance on installing a Cray Research computer system, including positioning support equipment in designated locations, reassembling the system, and verifying startup. It outlines considerations for site selection such as power quality, air quality, cooling water quality, and vibration sources. The computer room design must address personnel safety, air quality, future equipment plans, seismic activity, and accessibility. Computer equipment and support equipment each require specific temperature, humidity, and cleanliness conditions. Electrical power, cooling water supply, equipment separation, and a raised, static-dissipative floor must also meet certain standards for successful system installation.
Kollmorgen akmh datasheet rev-b_en-us
Kollmorgen has developed a new line of hygienic stainless steel washdown motors called the AKMH for use in demanding hygienic environments. The AKMH is designed to withstand rigorous washdown regimens with IP69K construction and corrosion resistant 316L stainless steel materials. It allows for quick cleaning without covers or guards. Testing showed the AKMH can reduce cleaning time by 50%, extend product life by 300%, and increase equipment uptime by 30%. The AKMH meets stringent industry guidelines for hygienic design and food safety. It is available in 19 sizes to replace air or hydraulic components with a clean, reliable servo motor solution.
Iccr presentatie 2015
Erik Verhoeven has worked in drum welding since 1979 and founded Arplas Welding BVBA in 2003. Arplas develops new drum welding technologies like the SyncronAC welder controller from 2003 that provides power savings up to 15% over older systems. Modern Arplas welders also have advantages like touch screens, belt drives, and thermal shrink electrodes. Arplas has installed over 140 welding systems worldwide and continues developing technologies to improve weld quality and reduce production costs.
IGS-6325-8UP2S Industrial Managed Ethernet Switch
IGS-6325-8UP2S2X L3 Industrial Managed PoE++ Switch features eight 10/100/1000BASE-T 802.3bt PoE++ ports with each port powering up to 95 watts and two 100/1000/2500BASE-X SFP interfaces in a rugged IP30 metal case for stable operation in heavy industrial demanding environments.
It supports rich PoE operation modes including 90-watt 802.3bt type-4 PoE++ ports, 95-watt PoH (Power over HD-BASE-T) mode and 4-pair force mode to solve the incompatibility of non-standard 4-pair PoE PDs in the field.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
IGS-6325-24P4X Industrial Managed Ethernet Switch
This document provides an overview and description of the IGS-6325-24P4X and IGS-6325-24P4S industrial managed switches. The switches provide 24 Gigabit Ethernet ports that support PoE+, 4 SFP/SFP+ ports, layer 3 routing, quality of service, security features, and management functions. They are suitable for applications including surveillance, transportation, building automation, and energy.
AccuThermo AW 410 Rapid Thermal Processing Equipment
The AccuThermo AW410 was derived from the AG Associates 610 production-proven design. Allwin21 Corp. is the exclusive manufacturer of the AG Associates Heatpulse 610 desktop atmospheric RTP (Rapid Thermal Processing) system. The system uses high intensity visible radiation to heat single wafer for short process periods of time at precisely controlled temperatures. The process periods are typically 1 600 seconds in duration, although periods of up to 9999 seconds can be selected. These capabilities, combined with the heating chamber's cold-wall design and superior heating uniformity, provide significant advantages over conventional furnace processing.
AccuThermo AW 410 Applications:
Silicon-dielectric growth
Implant annealing
Glass reflow
Silicides formation and annealing
Contact alloying
Nitridation of metals
Oxygen-donor annihilation
Other heat treatment process
AccuThermo AW 410 Typical Application Areas:
Chip manufacture
Compound industry: GaAs,GaN,GaP,GaINP,InP,SiC, III-V,II-VI
Optronics, Planar optical waveguides, Lasers
Nanotechnology
Biomedical
Battery
MEMS
Solar
LED
AccuThermo AW 410 Key Features:
35 years’ production-proven real RTP/RTA/RTO/RTN system.
Scattered IR light by special gold plated Al chamber surface.
Allwin21 advanced Software package with real time control technologies and many useful functions.
Consistent wafer-to-wafer process cycle repeatability.
Top and bottom High-intensity visible radiation Tungsten halogen lamp heating for fast heating rates with good repeatability performance and long lamp lifetime.
Cooling N2 (Or CDA) flows around the lamps and quartz isolation tube for fast cooling rates
Elimination of external contamination by Isolated Quartz Tube
Up to six gas lines with MFCs and shut-off valves
Energy efficient.
Small Footprint.
Made in U.S.A.
Application overview
Industrial UPS systems are commonly found in power generation, transmission, and distribution facilities to provide backup power for critical processes and systems. They are also used in oil and gas applications across upstream, midstream, and downstream facilities. Typical uses include powering control systems, safety equipment, monitoring devices, and telecommunications infrastructure. Around 80% of UPS usage in industrial settings is for automation and electrical balance of plant systems that must remain powered for continuous operations.
Nidec asi ship to shore connection for navy base
Nidec ASI provided frequency conversion systems for a new Italian Navy base in Taranto. The systems included 10 motor-generator sets that convert 50Hz power from land to 60Hz for ships, as well as excitation systems and medium voltage switchboards. The rotating converter systems each contain a 3000kVA synchronous motor and generator rigidly coupled to change frequencies. Nidec ASI's systems help power the new, more efficient Taranto naval base.
Herramientas de ensamble Ingersoll Rand
The document is a catalog for assembly tools from Ingersoll Rand that includes electric screwdrivers and fastening tools. It provides specifications for various models of electric screwdrivers including torque range, speed, weight and dimensions. It also lists accessories such as balancers and bits that can be used with the screwdrivers. The catalog describes features of the screwdriver models such as adjustable torque control, ergonomic designs, and ESD protection for electronics assembly. It indicates that Ingersoll Rand tools provide precise torque and speed control for assembly applications.
IGS-4215-4P4T Industrial Managed Switch
Industrial-grade, DIN-rail type L2/L4 Managed Gigabit PoE+ Switch featuring intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 4 10/100/1000BASE-T ports featuring 30-watt 802.3at PoE+ and 4 additional Gigabit copper ports.
The IGS-4215-4P4T is able to operate reliably , stably and quietly in any environment without affecting its performance. It comes with a total power budget of up to 144 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
What's hot (20)
AccuThermo AW 410 Rapid Thermal Processing Equipment
AccuThermo AW 410 Rapid Thermal Processing Equipment
Similar to some_implementations_Piotr_Nieoczym
AGE TECHNOLOGIES_2014 project briefs
The document discusses an automation project for a brewery involving temperature control of fermentation tanks. AGE Technologies was commissioned to design and implement a control system using Modicon PLCs and a SCADA system to monitor temperatures, control glycine valves and manage the operating modes of each tank. Key features included graphical tank status displays, temperature and process logging, and alarm annunciation. The project scope involved three PLC control systems networked via Ethernet with an overview SCADA system.
ES Europe Frunze
Sumy Frunze NPO is a private company established in 1896 that provides integrated solutions for the oil, gas, and power industries. It has manufacturing facilities in Ukraine and branch offices in Russia, Ukraine, Turkmenistan, and Azerbaijan. Sumy Frunze NPO designs, manufactures, and installs a wide range of process equipment including compressors, pumps, valves, and more. It also offers complete turnkey solutions and services for projects in industries such as oil and gas production, processing, transportation, power generation, and chemicals.
Allwin21 Product Brochures-Rapid Thermal Processors-2024.5.pdf
Allwin21 Corp. is the exclusive licensed manufacturer of AG Associates Heatpulse 610 Rapid Thermal Processing equipment. Allwin21 is manufacturing the new AccuThermo AW Series Atmospheric Rapid Thermal Processors and Vacuum Rapid Thermal Processors. Compared with traditional RTP systems, Allwin21’s AccuThermo AW RTPs have innovative software and more advanced temperature control technologies to achieve the BEST rapid thermal processing performance (repeatability, uniformity, and stability) with decades of research directly applicable to ours.
You can use MFC2 for wet N2 process with using bubbler on our RTP equipment during steady time. The chamber would be purged with dry N2 using MFC1 at the beginning and end of the process.
Please help fill in the RFQ at our website for suitable production proven Rapid Thermal Processor model and configuration for your applications. Please go through the Q and A if necessary before you fill in the RFQ below. Appreciate your time. Thank you very much.
For many years AG Associates was the dominant manufacturer of RTP systems. It was founded in 1981 and produced the first single wafer RTP system in 1982, the Heatpulse 210. In 1987, it produced the Heatpulse 610. These RTP systems run at atmospheric pressure and rely on a pre-process nitrogen or argon purge prior to wafer processing. They are still being used around the world in manufacturing, R&D and Universities. These RTP systems have a proven track record for reliability and simplicity.
Allwin21 Product Brochures-2024.5-email.pdf
Allwin21 Brochures for Rapid Thermal Processing equipment, Plasma Asher ,Plasma Descum Equipment, Plasma Etcher, RIE, Sputtering Deposition Equipment, Thin Film Metrology ,semiconductor equipment. Made in USA. All are production proven, the most popular semiconductor process equipment.
Allwin21 Corp. was formed in 2000 with a focus on professionally providing Rapid Thermal Process, Plasma Asher Strip / Descum, Plasma Etch/RIE, Sputter Deposition, and Metal Film Metrology semiconductor equipment, services and technical support in Semiconductor III-V, MEMS, Biomedical, Nanotechnology, Solar, & LED industries. We endeavor to be a leader in our product lines. To achieve this, we have been providing unique innovative and cost-effective technical solutions, high quality equipment, and on time spare parts delivery worldwide. We have maintained a global presence that has grown and expanded into the major high-tech manufacturing areas of the world. We pride ourselves on developing and continuing lasting customer relationships.
We understand that a timely responsive support and service are critical elements in semiconductor industries. Allwin21’s experienced engineer team is the best guarantee for high quality service and support. We provide on-site installation, training, maintenance, system optimization, retrofits, and/or customized upgrades.
For many years AG Associates was the dominant manufacturer of RTP systems. It was founded in 1981 and produced the first single wafer RTP system in 1982, the Heatpulse 210. In 1987, it produced the Heatpulse 610. These RTP systems run at atmospheric pressure and rely on a pre-process nitrogen or argon purge prior to wafer processing. They are still being used around the world in manufacturing, R&D and Universities. These RTP systems have a proven track record for reliability and simplicity.
Allwin21 Corp. is the exclusive licensed manufacturer of AG Associates Heatpulse 610 Rapid Thermal Processing equipment. Allwin21 is manufacturing the new AccuThermo AW Series Atmospheric Rapid Thermal Processors and Vacuum Rapid Thermo Processors.Compared with traditional RTP systems, Allwin21″s AccuThermo AW RTPs have innovative software and more advanced temperature control technologies to achieve the best rapid thermal processing performance ( repeatability , uniformity and Stability etc.).
Allwin21 and main products
Allwin21 Corp. was formed in 2000 with a focus on professionally providing Rapid Thermal Process, Plasma Asher Strip / Descum, Plasma Etch/RIE, Sputter Deposition and Metal Film Metrology high-tech semiconductor equipment, services and technical support in Semiconductor III-V, MEMS, Biomedical, Nanotechnology, Solar, Battery & LED industries. We endeavor to be a leader in our product lines.
We focus on extending product lifecycle, providing solutions, and engineering enhancements to many production proven semiconductor process equipment most directly related to III-V processing. These semiconductor equipment have been used in production and R&D since the 1990′s. They have proven processes and research. Allwin21 Corp. customizes these systems with Allwin21′s comparable integrated process control system with PC, solid robotic wafer transfer system, and new critical components. This is to achieve the goal of giving our customers a production edge, with right cost, and without having to worry about obsolete parts.
Presentation on PLC and SCADA
The document is a presentation about Rockwell Automation and programmable logic controllers (PLCs) given by Anil Maurya. It discusses how Rockwell Automation was founded in 1903 and acquired Allen-Bradley in 1985. PLCs were developed to replace relays and began being used widely in manufacturing in the 1970s and 1980s. The presentation covers components of automation systems including PLCs, variable frequency drives, and SCADA/HMI. It provides examples of how PLCs can be used to control systems like traffic lights and conveyor belts.
how to create company profile
This document provides an overview of Sofcon Systems India Pvt. Ltd., a company that provides industrial automation and building automation solutions. It details Sofcon's business segments, locations, solutions, domain expertise in various industries, and descriptions of automation projects implemented for clients. The document also includes milestones in Sofcon's history, visions for the future, and profiles of its group companies that provide training and integrated building management systems.
Allwin21 Product Brochures-Upgrade Kits-2024.5.pdf
Allwin21 Corp. has been focusing on providing solutions and enhancements to the following used semiconductor equipment. These OEM semiconductor equipment have been used in productions and R&D since 1990′s. They’ve each been PROCESS-PROVEN. Allwin21 Corp. can refurbish and/or upgrade these OEM systems with Allwin21′s comparable integrated process control system with PC, solid 3-axis robotic wafer transfer system (if applicable), and new critical components to achieve the goal of giving our customers a production edge with right cost.
We have been doing upgrade for many production proven equipment, such as Perkin-Elmer 2400, Perkin-Elmer 4400, Perkin-Elmer 4410, Perkin-Elmer 4450, Perkin-Elmer 4480, Matrix 105 , Matrix 106, Matrix 303, Matrix 303, Matrix 403, Matrix 205, Matrix 101, Matrix 102, Matrix 103, Matrix 104,Tegal 901e, Tegal 903e, Lam Research LAM AutoEtch 490, Lam AutoEtch 590, Lam AutoEtch 690, Branson/IPC 2000, Branson IPC 3000, Branson/IPC 4000, Gasonics Aura 3000, Gasonics Aura 3010, Gasonics L3510, Gasoncis Aura 1000, Gasonics AE 2001, AG Associates Heatpulse 610, AG Associates Heatpulse 410, AG Associates Minipulse 310, AG Associates Heatpulse 210 on the field for many cases. The reliability have been improved a lot for most of the tools after upgrading. We designed the upgrade kits for these working tools that can do plug and play and most of them only need 2 to 3 days include training. For PE sputter, since it is a little complicated, but we still target to upgrade within one week include training if the machine without other problems.
Why upgrade your old used semiconductor process equipment ?
Low cost solution of obsolete components and parts.
Use new air cooling RF generator to replace the obsolete water cooling RF Generator, avoiding water flood in Fab/Lab.
Use new integrated solid robotic wafer transfer to replace the obsolete index/frog robotic wafer transfer
Requirement of stability of the system
Requirement of network function (GEM/SECSII).
Requirement of PC control for data storage.
Requirement of GUI.
Requirement of more precise control.
Requirement of better repeatability, uniformity.
Requirement of easier maintenance, calibration, and trouble shooting.
Allwin21 Product Brochures-Sputtering Deposition-2024.5.pdf
Allwin21 Corp. has been focusing on providing solutions and enhancements to Perkin-Elmer 4400, Perkin-Elmer 4410, Perkin-Elmer 4450, Perkin-Elmer 4480 used sputter deposition semiconductor process equipment. These OEM semiconductor equipment have been used in productions and R&D since 1990′s. They have been proven to be a true “work horse”. Allwin21 Corp. can customize these OEM systems with Allwin21′s comparable integrated process control system with PC and new critical components. We rebuild AccuSputter AW 4450 Series Sputter Deposition systems with our own integrated process control system, giving our customers the tools to achieve a production edge at very low cost impact.
Please help fill in the RFQ at our website for suitable configuration for your applications. Appreciate your time.
IESA: Automation for Oil & Gas Industry
As a player in the Oil & Gas industry, IESA Automation possesses the accreditations and
trained personnel necessary to carry out off-shore missions. Accordingly, the company is on
the TOTAL and ENI Vendor Lists.
Allwin21 Product Brochures-Plasma Asher Descum 2024.5.pdf
Allwin21 Corp. has been focusing on providing solutions and enhancements to Tegal 901e, Tegal 903e, Tegal 901e TTW, Tegal 903e TTW,Lam AutoEtch 490 ,Lam AutoEtch 590, Lam AutoEtch 690, Lam AutoEtch 790 ,Lam Rainbow 44XX, 45XX, 46XX,47XX Series , Gasonics Aura 1000, Gasonics Aura 2000LL, Gasonics Aura 3010, Gasonics L3510 ,,Matrix 105, Matrix 105R, Matrix 205, Matrix 10 (1104, 1107, 1108), Matrix 303,Matrix 403 ,Matrix 10(1303, 1307), Branson/IPC 3000, Branson/IPC L3200 used Plasma Asher, Plasma Descum,plasma Etch, RIE semiconductor process equipment. These OEM Etch RIE semiconductor equipment have been used in productions and R&D since 1990′s. They have been proven to be a true “work horse”. Allwin21 Corp. can customize these OEM systems with Allwin21′s comparable integrated process control system with PC, solid robotic wafer transfer system (Video) and new critical components to achieve the goal of giving our customers a production edge with right cost.
Practical Analytical Instrumentation in On-line Applications
At the end of this workshop participants will be able to:
Recognise and efficiently troubleshoot a wide variety of industrial analytical measuring instruments
Describe the construction and operation of the most important analytical instruments
Define and explain relevant chemical terminology
Identify sample chemical formulae and symbols
Implement procedures for testing and calibration of analytical instruments
WHO SHOULD ATTEND?
Technicians
Senior operators
Instrumentation and control engineers
Electrical engineers
Project engineers
Design engineers
Process control engineers
Instrumentation sales engineers
Consulting ingenious
Electricians
Maintenance engineers
Systems engineers
MORE INFORMATION: http://www.idc-online.com/content/practical-analytical-instrumentation-line-applications-3
Allwin21 Product Brochures-Plasma Etcher-2024.5.pdf
Allwin21 Corp. has been focusing on providing solutions and enhancements to plasma Etch RIE semiconductor process equipment. These OEM Etch RIE semiconductor equipment have been used in productions and R&D since 1990′s. They have been Process-Proven. Allwin21 Corp. can customize these OEM systems with Allwin21′s comparable integrated process control system with PC, solid 3-axis robotic wafer transfer system, and new critical components to achieve the goal of giving our customers a production edge.
Please help fill in the RFQ at our website for suitable model and configuration for your applications. Appreciate your time.
Allwin21 Corp. has been focusing on providing solutions and enhancements to Tegal 901e, Tegal 903e, Tegal 901e TTW, Tegal 903e TTW,Lam AutoEtch 490 ,Lam AutoEtch 590, Lam AutoEtch 690, Lam AutoEtch 790 ,Lam Rainbow 44XX, 45XX, 46XX,47XX Series , Gasonics Aura 1000, Gasonics Aura 2000LL, Gasonics Aura 3010, Gasonics L3510 ,,Matrix 105, Matrix 105R, Matrix 205, Matrix 10 (1104, 1107, 1108), Matrix 303,Matrix 403 ,Matrix 10(1303, 1307), Branson/IPC 3000, Branson/IPC L3200 used Plasma Asher, Plasma Descum,plasma Etch, RIE semiconductor process equipment. These OEM Etch RIE semiconductor equipment have been used in productions and R&D since 1990′s. They have been proven to be a true “work horse”. Allwin21 Corp. can customize these OEM systems with Allwin21′s comparable integrated process control system with PC, solid robotic wafer transfer system (Video) and new critical components to achieve the goal of giving our customers a production edge with right cost.
Erkasis company presentation
ERKA GROUP provides industrial refrigeration engineering, automation, and services. It has over 15 years of experience in refrigeration projects across multiple markets. The company aims to be a reliable global brand and increase market share through innovative solutions that improve energy efficiency while ensuring safety and environmental compliance.
ExLon VacTech Solutions
ExLon VacTech Solutions is a vacuum equipment service provider located in Aurangabad, India. It was founded in 2008 and provides services for high and medium vacuum equipment including furnaces, autoclaves, and ovens. ExLon also manufactures and supplies vacuum components and has expertise in installation, commissioning, repairs, and automation and controls for vacuum systems. Some of ExLon's projects include commissioning high vacuum furnaces for companies in India and the US and manufacturing a unique wet cycle autoclave and air drying oven.
Resume_Chandan
Chandan Ray has over 6 years of experience as a Senior Engineer at Praj Industries Limited. He has extensive experience in project engineering, electrical and instrumentation, erection and commissioning of plants in various industries. Some of his responsibilities include project execution, PLC/DCS programming and commissioning, site acceptance testing, and providing on-site support. He has international experience working on projects in Africa, Asia, South America, and the Middle East.
Marc van wonterghem | E-Rational - value for heat
E-RATIONAL is a division of BEP Europe that manufactures organic Rankine cycle systems for recovering waste heat from industrial processes and other sources. Some key applications mentioned in the document include recovering waste heat from aluminum production to generate 30-70kW of power, and recovering low pressure steam from a chemical plant to generate 200kW of power. The document provides details on E-RATIONAL's ORC product lines and their specifications, as well as case studies of ORC systems installed at various customer sites.
Peak hydrogen generators industry focus: Oil and gas 2021
Peak Scientific an Peak Gas Generation company supplies Nitrogen, Hydrogen, oxygen and compressed air to laboratories and businesses with global support. This presentation provides information specific for the use of Hydrogen gas generators for the oil and gas industry and use in Gas chromatography (GC). We explain the safety features and benefits of a generator over alternative methods of gas delivery, certifications and ASTM methods that support H2 as a carrier gas for GC. We welcome any questions or enquiries to anzsupport@peakscientific.com
Izgen Engineering Ltd
This document provides information about IZGEN Engineering, including its services, organization, projects, and quality management. IZGEN offers electrical and mechanical contracting services, including design, installation, maintenance, and commissioning. It has over 30 engineers and technicians and annual turnover of $8 million. IZGEN has successfully completed many industrial and commercial projects in Turkey and provides high quality services with a focus on health, safety, and environment.
Similar to some_implementations_Piotr_Nieoczym (20)
Allwin21 Product Brochures-Rapid Thermal Processors-2024.5.pdf
Allwin21 Product Brochures-Rapid Thermal Processors-2024.5.pdf
Allwin21 Product Brochures-Upgrade Kits-2024.5.pdf
Allwin21 Product Brochures-Upgrade Kits-2024.5.pdf
Allwin21 Product Brochures-Sputtering Deposition-2024.5.pdf
Allwin21 Product Brochures-Sputtering Deposition-2024.5.pdf
Allwin21 Product Brochures-Plasma Asher Descum 2024.5.pdf
Allwin21 Product Brochures-Plasma Asher Descum 2024.5.pdf
Practical Analytical Instrumentation in On-line Applications
Practical Analytical Instrumentation in On-line Applications
Allwin21 Product Brochures-Plasma Etcher-2024.5.pdf
Allwin21 Product Brochures-Plasma Etcher-2024.5.pdf
Steam Turbine Controls diagram picture, control system
Steam Turbine Controls diagram picture, control system
Peak hydrogen generators industry focus: Oil and gas 2021
Peak hydrogen generators industry focus: Oil and gas 2021
some_implementations_Piotr_Nieoczym
- 1. Some implementations of the control systems Control system for water deaeration, beer filtration and distribution to packaging line, Nigerian Breweries, Heineken group, Ota, Nigeria. For Corosys Proc • 2 Siemens S7-300 PLC's, • 2 Siemens MP377 operator panels, • about 500 I/O. I've made all system, electrical supervision, comissioning. Piotr Nieoczym Page 1
- 2. Brewhouse control system, Nigerian Breweries, Heineken group, Ota, Nigeria. • 3 x S7-400 PLC's, • 2 x Siemens MP377 operator panels, • about 2500 I/O. I made part of the PLC programming, electrial works co-supervision, commissioning. Piotr Nieoczym Page 2
- 3. Control system for medical waste incinerator • PLC - S7 300, • about 300 I/O, • Operator stadion - ASIX. All design and commissioning have been made by me. Piotr Nieoczym Page 3
- 4. Control system for pneumatic transport of copper sulphate, Copper Smelter in Głogów • Schneider Quantum PLC, • Magelis – operator panel, about. 300 I/O. All design and commissioning have been made by me. Piotr Nieoczym Page 4
- 5. Installation of ovens gas cleaning anode, copper smelter in Legnica • 2 xSiemens S7-400 PLCs, • 2 x Siemens MP-270 panels, • 2 x operator stations Wonderware Intouch SCADA, • about. 1500 I/O. I made the SCADA system, comissioning. Piotr Nieoczym Page 5
- 6. Installation of gas purification in Mahhindra Ugine Steel Company Ltd, Jagdish Nagar, India • Schneider Electric Premium PLC, • Operator stadion based on ASIX, • about 500 I/O. I made SCADA system, comissioning. Piotr Nieoczym Page 6
- 7. Control system for washing machine factory building Amica Wronki SA • 17 x S7-300 PLCs, • 2 x opeator stations Wonderware Intouch SCADA, • about 6500 I/O. I made SCADA system and a part of PLC software, comissioning. Piotr Nieoczym Page 7
- 8. Recovery of rhenium from acid slurry, Ecoren SA in Glogow • Schneider Electric Premium PLC • 3 operator stations Wonderware InTouch, • about 400 I/O. I made SCADA system and part of PLC program, comissioning. Piotr Nieoczym Page 8
- 9. Piotr Nieoczym Page 9
- 10. Installation for the production of zinc oxide and the installation of flue gas from rotary kilns (wet), Boleslaw Recycling in Bukowno • 7 x S7-400 PLCs, • 1x Redundant WinCC server • 8 x operator stations Siemens WinCC 6.0 SCADA, • about 5000 I/O. I made SCADA system and part of PLC program, comissioning. Piotr Nieoczym Page 10
- 11. Piotr Nieoczym Page 11
- 12. Dust extraction system for ZRP kolumn Stack gases Hindistan Zinc ltd. Chanderia Led Zinc Smelter India. • Alarn Bradley RsLogix 500 PLC, • 2 operator stations Rsview 32 SCADA, • about 600 I/O. I made SCADA system, comissioning. Piotr Nieoczym Page 12
- 13. Control System for ash removing and sorbent feed in a 460 MW power plant in Bedzin • 8 x S7-300 PLCs, • 6 x operator panels MP 270 • 2 x oparator stations Asix SCADA, • about 3000 I/O. I made SCADA system and PLC programs for all PLC’s, comissioning. Piotr Nieoczym Page 13
- 14. Flue gas desulphurisation (dry scrubing) for copper smelter „Głogów” • 11 x PLC controllers Schneider Electric Quantum, • about 5000 I/O, • 10 x operator panels - PanelMate 3000, • 2 x operator stations MonitorPro SCADA. I’ve made most of PLC’s programs and all applications for operator panels, commissioning. Piotr Nieoczym Page 14