Solepower Technology
•Download as PPTX, PDF•
2 likes•488 views
Solepower is a technology that generates electricity from walking. It works by capturing the mechanical energy from footsteps using coils in the sole, converting it to electrical energy via a generator, and storing it in a battery. The battery can then charge mobile devices directly or via a power pack. Solepower insoles are slim and can fully charge a phone after 2-3 kilometers of walking. They provide a portable renewable energy source that is safe and waterproof. The technology has applications for powering devices in remote areas without electricity.
Report
Share
Report
Share
Recommended
Walk and charge Technology
Walk and Charge technology allows users to charge electronic devices like phones and music players through energy generated by human walking. It utilizes either a dynamo or piezoelectric materials placed in shoes or underfoot. Piezoelectric materials produce voltage when pressure is applied, so each step generates charge. The document outlines how to make shoes equipped with piezoelectric generators and diodes to convert alternating current to direct current for charging. Statistics show a 20 minute walk can fully charge a phone. Large scale installations are also discussed to capture energy from foot traffic in places like train stations. The technology provides a clean, portable way to charge devices while walking.
Power generation through foot steps
This document describes a device that generates electricity through human foot steps. It contains the following key points:
- The device uses a dynamo and rack and pinion gear system to convert the rotational motion from foot steps into linear motion, which drives a magnet inside a coil to generate electricity.
- As a person steps on an iron plate, it drives a crankshaft and gear arrangement that moves a magnet back and forth in a coil, producing direct current electricity that can be stored in a battery.
- The stored electricity generated from foot traffic on busy stairways or speed bumps could provide a useful source of power for various applications.
Footstep power generation
This document describes a system for generating electricity from footstep power using a piezoelectric sensor and microcontroller. The system works by converting the downward force of a footstep on a plate into rotational motion of a shaft connected to a generator. When a person steps on the plate, the piezoelectric sensor produces electricity that is stored in a battery. The stored power can then be used for applications like street lights, fans, or security alarms. The system provides an alternative renewable energy source and has potential to harness wasted foot traffic energy in crowded areas.
Power generating system by footstep
This presentation is on generating power from our footsteps. It is a very easy and simple method to generate power.
piezo-Shoe
This document describes a piezo-electric shoe that generates electricity from the kinetic energy of walking to charge an internal battery. Piezoelectric crystals produce voltage when pressure is applied, and placing these crystals in the shoe's insole harness the energy from each step. The battery stores the accumulated charge to power small electronics without needing plugs or cables. While a prototype generated only small amounts of power, future designs may improve efficiency by an order of magnitude, making piezo-electric shoes a practical way to scavenge renewable energy from normal walking.
Foot step energy generator
This document describes a proposed system for generating electricity from footstep energy. It consists of a footstep plate that is depressed when walked on, activating a rack and pinion gear mechanism connected to a generator. The generator produces DC power that is stored in a battery. An inverter converts the DC to AC power that can power lights or other loads. It has applications for powering street lights or in crowded areas. The system converts wasted human kinetic energy from walking into usable electricity.
Footsteppowergenerator 140707114713-phpapp01
This document describes a system for generating electricity from footstep power. The system uses piezoelectric sensors beneath footstep platforms to convert the kinetic energy from footsteps into electrical energy, which is stored in a lead-acid battery. An inverter then converts the DC battery voltage to AC voltage that can power various loads. The system has applications for powering lights and devices in areas with high foot traffic like streets, railways, temples, and more. It provides a renewable energy source without requiring fuel inputs.
seminar on footsteps energy generation
This document describes a footstep energy generation system that converts the kinetic energy from human footsteps into electrical energy. It discusses how piezoelectric materials in the system generate electricity when compressed by footsteps. The generated electricity can then be stored in batteries and used for applications like street lighting. The system provides a sustainable energy source for places with high foot traffic and has been installed in some locations around the world.
Recommended
Walk and charge Technology
Walk and Charge technology allows users to charge electronic devices like phones and music players through energy generated by human walking. It utilizes either a dynamo or piezoelectric materials placed in shoes or underfoot. Piezoelectric materials produce voltage when pressure is applied, so each step generates charge. The document outlines how to make shoes equipped with piezoelectric generators and diodes to convert alternating current to direct current for charging. Statistics show a 20 minute walk can fully charge a phone. Large scale installations are also discussed to capture energy from foot traffic in places like train stations. The technology provides a clean, portable way to charge devices while walking.
Power generation through foot steps
This document describes a device that generates electricity through human foot steps. It contains the following key points:
- The device uses a dynamo and rack and pinion gear system to convert the rotational motion from foot steps into linear motion, which drives a magnet inside a coil to generate electricity.
- As a person steps on an iron plate, it drives a crankshaft and gear arrangement that moves a magnet back and forth in a coil, producing direct current electricity that can be stored in a battery.
- The stored electricity generated from foot traffic on busy stairways or speed bumps could provide a useful source of power for various applications.
Footstep power generation
This document describes a system for generating electricity from footstep power using a piezoelectric sensor and microcontroller. The system works by converting the downward force of a footstep on a plate into rotational motion of a shaft connected to a generator. When a person steps on the plate, the piezoelectric sensor produces electricity that is stored in a battery. The stored power can then be used for applications like street lights, fans, or security alarms. The system provides an alternative renewable energy source and has potential to harness wasted foot traffic energy in crowded areas.
Power generating system by footstep
This presentation is on generating power from our footsteps. It is a very easy and simple method to generate power.
piezo-Shoe
This document describes a piezo-electric shoe that generates electricity from the kinetic energy of walking to charge an internal battery. Piezoelectric crystals produce voltage when pressure is applied, and placing these crystals in the shoe's insole harness the energy from each step. The battery stores the accumulated charge to power small electronics without needing plugs or cables. While a prototype generated only small amounts of power, future designs may improve efficiency by an order of magnitude, making piezo-electric shoes a practical way to scavenge renewable energy from normal walking.
Foot step energy generator
This document describes a proposed system for generating electricity from footstep energy. It consists of a footstep plate that is depressed when walked on, activating a rack and pinion gear mechanism connected to a generator. The generator produces DC power that is stored in a battery. An inverter converts the DC to AC power that can power lights or other loads. It has applications for powering street lights or in crowded areas. The system converts wasted human kinetic energy from walking into usable electricity.
Footsteppowergenerator 140707114713-phpapp01
This document describes a system for generating electricity from footstep power. The system uses piezoelectric sensors beneath footstep platforms to convert the kinetic energy from footsteps into electrical energy, which is stored in a lead-acid battery. An inverter then converts the DC battery voltage to AC voltage that can power various loads. The system has applications for powering lights and devices in areas with high foot traffic like streets, railways, temples, and more. It provides a renewable energy source without requiring fuel inputs.
seminar on footsteps energy generation
This document describes a footstep energy generation system that converts the kinetic energy from human footsteps into electrical energy. It discusses how piezoelectric materials in the system generate electricity when compressed by footsteps. The generated electricity can then be stored in batteries and used for applications like street lighting. The system provides a sustainable energy source for places with high foot traffic and has been installed in some locations around the world.
Solar Power Charge Controller
A solar charge controller regulates voltage and current from solar panels to batteries to prevent overcharging. It uses op-amps, MOSFETs, diodes and other components. Solar panels produce more than 12 volts, so the controller ensures batteries charge to 14-14.5 volts. It also protects against overcharging, deep discharge, and undervoltage. Charge controllers are used in solar home systems, street lights, hybrid power systems, and water pumps to store solar energy in batteries.
PPT On "Walk N Charge" By Using Dynamo
The document describes a device called "Walk N Charge" that uses a dynamo to convert the kinetic energy from walking into electrical energy to charge low-power devices. As the user walks, the dynamo attached to their leg spins and generates 3.5 watts of power with each stride, enough to slowly charge a mobile phone battery with 20 minutes of intermittent walking. The device has advantages like being portable, renewable, and allowing charging anywhere without other power sources. It could help provide charging in rural areas and for military personnel on the move while reducing carbon emissions.
Solar Presentation.pptx
This document discusses maximum power point tracking (MPPT) for photovoltaic (PV) arrays. It outlines the components of a PV array system and factors that affect the arrays' power output such as temperature, irradiance, and shading. The document then presents a mathematical model of a PV array developed in Simulink and shows how changing temperatures and irradiances affect the power curve. It introduces MPPT and two common MPPT algorithms, perturb and observe (P&O) and incremental conductance, developed and compared in Simulink. An experimental setup is described and results show the P&O oscillates more while incremental conductance finds the maximum power point more precisely.
Foot energy generation
The document discusses the piezoelectric effect and its application in footstep energy generation. It describes how Pierre and Jacques Curie discovered the piezoelectric effect in 1880. The effect generates electric charge in materials like quartz when subjected to mechanical stress. One application is installing piezoelectric sensors on pathways or in shoes to harvest energy from footsteps, which can be stored in batteries and used to power loads. A project in France has implemented this successfully to provide rural energy without dependence on other sources.
Android mobile charger using solar panel
This document presents the design of an Android mobile charger using a solar panel. It introduces the need for portable chargers for mobile devices and explains how solar energy can be harnessed to power such a charger. Key aspects of the design include using a solar panel to convert sunlight into electrical energy, which is then stored in rechargeable batteries. The stored energy can then be used to recharge mobile devices. The summary concludes that such solar-powered chargers can help reduce energy consumption from non-renewable sources and promote sustainable energy solutions.
Foot Step Power Generation Using Piezoelectric Sensors
This document describes a student project to generate electricity from footstep force using piezoelectric sensors. The project aims to address Pakistan's energy shortages by producing pollution-free and fuel-less energy at crowded locations. The system uses piezoelectric sensors below a plate to convert mechanical energy from footsteps into electrical energy, which is then regulated and stored in a battery using a microcontroller. The document outlines the group members, problem statement, objectives, block diagram, calculations estimating power output from varying numbers of footsteps, and potential future applications of piezoelectric energy harvesting from foot traffic in places like train stations.
power generation through foot step
This document presents a footstep power generation system that uses piezoelectric materials to convert the mechanical energy from human footsteps into electrical energy. It discusses the components required, including piezoelectric crystals, batteries, capacitors, and an inverter. The working principle is that piezoelectric materials generate a charge when pressure is applied, allowing the system to harness energy from walking. Applications include powering lights and devices in areas with foot traffic like schools, malls, and metro stations. The system has advantages of being eco-friendly and self-generating, but high initial costs and limited applicability in only one location.
Hybrid inverter project report
The need of running AC Loads on solar energy leads us to the design of Solar Power Inverter.. Since the majority of modern conveniences all run on 220 volts AC, the Power Inverter will be the heart of the Solar Energy System. It not only converts the low voltage 12 volts DC to the 220 volts AC that runs most appliances, but also can charge the batteries if connected to the utility grid as in the case of a totally independent stand-alone solar power system. These are special inverters which are designed to draw energy from a battery, manage the battery charge via an onboard charger.
An inverter is an electrical device that converts direct current (DC) to alternating current (AC); the converted AC can be at any required voltage and frequency with the use of appropriate transformers, switching, and control circuits. Solid-state inverters have no moving parts and are used in a wide range of applications, from small switching power supplies in computers, to large electric utility high-voltage direct current applications that transport bulk power. Inverters are commonly used to supply AC power from DC sources such as solar panels or batteries.
Solar Mobile Charger PPT
This document describes the design of a solar-powered mobile phone charger. It begins with an introduction to solar cells and the photovoltaic effect. It then discusses the specifications of the charger, which uses a 5.5V/1000mA solar panel to output 300-550mA to charge a mobile phone in about 60 minutes. The document includes a block diagram and circuit diagram of the charger. It concludes that the solar charger provides ripple-free charging to increase battery life without developing high voltages.
device generating elecricity by footstep using peizoelectic material
This document summarizes a method for generating electricity from human footstep using piezoelectric materials. It discusses how piezoelectric sensors in footwear or flooring can convert the mechanical energy from walking or running into electrical energy. The document evaluates different piezoelectric materials and connection configurations to determine the most effective design. A series-parallel connection of piezoelectric crystals is found to generate both a usable voltage and current from footstep force. This approach aims to harness wasted human energy for power generation in a cleaner and more sustainable way.
Power generation from shoes & utilize it to charge the mobile's, laptop's or ...
This document summarizes a student's paper on developing an energy harvesting source from piezoelectric materials in shoes. It discusses using piezoelectric transducers embedded in shoe heels to convert the mechanical energy from walking into electrical energy. The harvested energy could then be used to power small electronics or charge batteries for devices like sensors. The student's project aims to investigate piezoelectric materials and circuitry that can efficiently harvest energy from footsteps on a large scale to enable self-powered sensors and other applications.
WIND-SOLAR-FUEL CELL HYBRID SYSTEM
This document describes a hybrid energy system that combines solar, wind, and fuel cell technologies. The system aims to provide reliable power for a 1kW load. It uses 6 photovoltaic panels that generate 1.5kW of power during the day. A vertical axis wind turbine produces 1.2kWp of power. A proton exchange membrane fuel cell stacks adds 1kW of power. The hybrid system mitigates the intermittency of solar and wind energy by allowing excess power generated to charge the fuel cell for use when renewable sources are unavailable. The document outlines the component selection and system design, and discusses innovations that could improve the efficiency and viability of such hybrid energy systems in the future.
Power generation in footsteps by Piezoelectric materials
Power generation in footsteps by piezo electric transducers - A project work by students of Alva's institute of engineering and technology, Moodbidre, Mangalore....
Slides created by Melwin Dmello... (ph; 8147814891)
Solar Power Based Buck boost Regulator
Currently there are plenty of technological applications that utilize natural, environmental-friendly sources of energy. However, a disadvantage often found in natural energy sources is that the intensity produced is uncertain.
This occurence is also found in solar panels, wherein the light intensity that enters is not always equal. Light intensity may be affected by various factors such as ones on gloomy or sunny weathers.
With the use of buck-boost converters, the amount of output voltage may be set to higher or lower than the input voltage, enabling us to maintain the desired output voltage.
Foot step power generator
This document describes a footstep power generation system that converts the mechanical energy from walking or running into electrical energy using piezoelectric sensors. The electrical energy is stored in a lead acid battery and can be used to power AC and DC loads. An inverter converts the DC battery voltage to AC voltage. The system provides a low-cost renewable energy solution that could power rural applications and emergency situations by harvesting wasted human biomechanical energy.
Pump storage Hydroelectricity
Pump storage hydroelectricity involves pumping water from a lower reservoir to an upper reservoir during off-peak hours using surplus grid power. The stored water is then released through turbines to generators during peak hours to produce electricity and meet higher demand. It helps balance the electricity load by absorbing excess power during low demand and releasing it during high demand periods. The largest pump storage plant is located in Bath County, Virginia and has an installed capacity of 3003MW from 6 turbines. It provides load balancing and frequency regulation services on the power grid.
Mppt presentation slides final
Hey Guys,
This Project we made it for final year Engineering students and for well knowledge. It was an amazing experience when we made it successfully.
If you want this project then contact :
Kalpesh Badgujar - 8879254715
if any query about this project mail :
badgujarkalpesh201@gmail.com
Ppt on solar mobile chargers
This document summarizes a student project on a solar mobile phone charger. It begins with an introduction to the solar process, explaining that sunlight is composed of photons that transfer energy to electrons in solar cells. It then provides specifications of the solar panel, including an output voltage of 5.5V and current of 300-550mA. It notes that the charger can fully charge a typical mobile phone in about 60 minutes using direct current from the solar panel.
FOOT STEP POWER GENERATION
This document presents a seminar on footstep power generation systems. It introduces piezoelectric materials that can generate electric charges when pressure is applied. The system works by using piezoelectric transducers under a footstep arrangement to convert mechanical energy from footsteps into electrical energy. This variable voltage is stabilized and stored in a battery, then inverted to AC power. Footstep power generation has advantages like being renewable, eco-friendly, and requiring no external power or much maintenance. However, it also has high initial costs and implementation challenges. Potential applications include emergency power, agriculture, homes, and street lighting.
1-19
The document discusses different types of logical arguments including deductive and inductive arguments. It defines key terms like valid, sound, premises and conclusion. For deductive arguments it explains syllogisms like modus ponens and modus tollens. Inductive arguments rely on experience but do not guarantee truth, only probability. The document also discusses abductive arguments, fallacies, and necessary and sufficient conditions.
Palestra Semana Ecommerce
1) O documento apresenta as biografias de Sergio Lima e Ricardo Panini, sócios da empresa AD.Brazil, e descreve suas experiências profissionais.
2) A agenda inclui tópicos sobre redes sociais, promoção, planejamento, execução, divulgação, gestão e mensuração de campanhas digitais.
3) Será realizada uma dinâmica durante a palestra para sorteio de um iPad entre os participantes que tuitarem a resposta correta para uma pergunta sobre o conteúdo apresentado.
More Related Content
What's hot
Solar Power Charge Controller
A solar charge controller regulates voltage and current from solar panels to batteries to prevent overcharging. It uses op-amps, MOSFETs, diodes and other components. Solar panels produce more than 12 volts, so the controller ensures batteries charge to 14-14.5 volts. It also protects against overcharging, deep discharge, and undervoltage. Charge controllers are used in solar home systems, street lights, hybrid power systems, and water pumps to store solar energy in batteries.
PPT On "Walk N Charge" By Using Dynamo
The document describes a device called "Walk N Charge" that uses a dynamo to convert the kinetic energy from walking into electrical energy to charge low-power devices. As the user walks, the dynamo attached to their leg spins and generates 3.5 watts of power with each stride, enough to slowly charge a mobile phone battery with 20 minutes of intermittent walking. The device has advantages like being portable, renewable, and allowing charging anywhere without other power sources. It could help provide charging in rural areas and for military personnel on the move while reducing carbon emissions.
Solar Presentation.pptx
This document discusses maximum power point tracking (MPPT) for photovoltaic (PV) arrays. It outlines the components of a PV array system and factors that affect the arrays' power output such as temperature, irradiance, and shading. The document then presents a mathematical model of a PV array developed in Simulink and shows how changing temperatures and irradiances affect the power curve. It introduces MPPT and two common MPPT algorithms, perturb and observe (P&O) and incremental conductance, developed and compared in Simulink. An experimental setup is described and results show the P&O oscillates more while incremental conductance finds the maximum power point more precisely.
Foot energy generation
The document discusses the piezoelectric effect and its application in footstep energy generation. It describes how Pierre and Jacques Curie discovered the piezoelectric effect in 1880. The effect generates electric charge in materials like quartz when subjected to mechanical stress. One application is installing piezoelectric sensors on pathways or in shoes to harvest energy from footsteps, which can be stored in batteries and used to power loads. A project in France has implemented this successfully to provide rural energy without dependence on other sources.
Android mobile charger using solar panel
This document presents the design of an Android mobile charger using a solar panel. It introduces the need for portable chargers for mobile devices and explains how solar energy can be harnessed to power such a charger. Key aspects of the design include using a solar panel to convert sunlight into electrical energy, which is then stored in rechargeable batteries. The stored energy can then be used to recharge mobile devices. The summary concludes that such solar-powered chargers can help reduce energy consumption from non-renewable sources and promote sustainable energy solutions.
Foot Step Power Generation Using Piezoelectric Sensors
This document describes a student project to generate electricity from footstep force using piezoelectric sensors. The project aims to address Pakistan's energy shortages by producing pollution-free and fuel-less energy at crowded locations. The system uses piezoelectric sensors below a plate to convert mechanical energy from footsteps into electrical energy, which is then regulated and stored in a battery using a microcontroller. The document outlines the group members, problem statement, objectives, block diagram, calculations estimating power output from varying numbers of footsteps, and potential future applications of piezoelectric energy harvesting from foot traffic in places like train stations.
power generation through foot step
This document presents a footstep power generation system that uses piezoelectric materials to convert the mechanical energy from human footsteps into electrical energy. It discusses the components required, including piezoelectric crystals, batteries, capacitors, and an inverter. The working principle is that piezoelectric materials generate a charge when pressure is applied, allowing the system to harness energy from walking. Applications include powering lights and devices in areas with foot traffic like schools, malls, and metro stations. The system has advantages of being eco-friendly and self-generating, but high initial costs and limited applicability in only one location.
Hybrid inverter project report
The need of running AC Loads on solar energy leads us to the design of Solar Power Inverter.. Since the majority of modern conveniences all run on 220 volts AC, the Power Inverter will be the heart of the Solar Energy System. It not only converts the low voltage 12 volts DC to the 220 volts AC that runs most appliances, but also can charge the batteries if connected to the utility grid as in the case of a totally independent stand-alone solar power system. These are special inverters which are designed to draw energy from a battery, manage the battery charge via an onboard charger.
An inverter is an electrical device that converts direct current (DC) to alternating current (AC); the converted AC can be at any required voltage and frequency with the use of appropriate transformers, switching, and control circuits. Solid-state inverters have no moving parts and are used in a wide range of applications, from small switching power supplies in computers, to large electric utility high-voltage direct current applications that transport bulk power. Inverters are commonly used to supply AC power from DC sources such as solar panels or batteries.
Solar Mobile Charger PPT
This document describes the design of a solar-powered mobile phone charger. It begins with an introduction to solar cells and the photovoltaic effect. It then discusses the specifications of the charger, which uses a 5.5V/1000mA solar panel to output 300-550mA to charge a mobile phone in about 60 minutes. The document includes a block diagram and circuit diagram of the charger. It concludes that the solar charger provides ripple-free charging to increase battery life without developing high voltages.
device generating elecricity by footstep using peizoelectic material
This document summarizes a method for generating electricity from human footstep using piezoelectric materials. It discusses how piezoelectric sensors in footwear or flooring can convert the mechanical energy from walking or running into electrical energy. The document evaluates different piezoelectric materials and connection configurations to determine the most effective design. A series-parallel connection of piezoelectric crystals is found to generate both a usable voltage and current from footstep force. This approach aims to harness wasted human energy for power generation in a cleaner and more sustainable way.
Power generation from shoes & utilize it to charge the mobile's, laptop's or ...
This document summarizes a student's paper on developing an energy harvesting source from piezoelectric materials in shoes. It discusses using piezoelectric transducers embedded in shoe heels to convert the mechanical energy from walking into electrical energy. The harvested energy could then be used to power small electronics or charge batteries for devices like sensors. The student's project aims to investigate piezoelectric materials and circuitry that can efficiently harvest energy from footsteps on a large scale to enable self-powered sensors and other applications.
WIND-SOLAR-FUEL CELL HYBRID SYSTEM
This document describes a hybrid energy system that combines solar, wind, and fuel cell technologies. The system aims to provide reliable power for a 1kW load. It uses 6 photovoltaic panels that generate 1.5kW of power during the day. A vertical axis wind turbine produces 1.2kWp of power. A proton exchange membrane fuel cell stacks adds 1kW of power. The hybrid system mitigates the intermittency of solar and wind energy by allowing excess power generated to charge the fuel cell for use when renewable sources are unavailable. The document outlines the component selection and system design, and discusses innovations that could improve the efficiency and viability of such hybrid energy systems in the future.
Power generation in footsteps by Piezoelectric materials
Power generation in footsteps by piezo electric transducers - A project work by students of Alva's institute of engineering and technology, Moodbidre, Mangalore....
Slides created by Melwin Dmello... (ph; 8147814891)
Solar Power Based Buck boost Regulator
Currently there are plenty of technological applications that utilize natural, environmental-friendly sources of energy. However, a disadvantage often found in natural energy sources is that the intensity produced is uncertain.
This occurence is also found in solar panels, wherein the light intensity that enters is not always equal. Light intensity may be affected by various factors such as ones on gloomy or sunny weathers.
With the use of buck-boost converters, the amount of output voltage may be set to higher or lower than the input voltage, enabling us to maintain the desired output voltage.
Foot step power generator
This document describes a footstep power generation system that converts the mechanical energy from walking or running into electrical energy using piezoelectric sensors. The electrical energy is stored in a lead acid battery and can be used to power AC and DC loads. An inverter converts the DC battery voltage to AC voltage. The system provides a low-cost renewable energy solution that could power rural applications and emergency situations by harvesting wasted human biomechanical energy.
Pump storage Hydroelectricity
Pump storage hydroelectricity involves pumping water from a lower reservoir to an upper reservoir during off-peak hours using surplus grid power. The stored water is then released through turbines to generators during peak hours to produce electricity and meet higher demand. It helps balance the electricity load by absorbing excess power during low demand and releasing it during high demand periods. The largest pump storage plant is located in Bath County, Virginia and has an installed capacity of 3003MW from 6 turbines. It provides load balancing and frequency regulation services on the power grid.
Mppt presentation slides final
Hey Guys,
This Project we made it for final year Engineering students and for well knowledge. It was an amazing experience when we made it successfully.
If you want this project then contact :
Kalpesh Badgujar - 8879254715
if any query about this project mail :
badgujarkalpesh201@gmail.com
Ppt on solar mobile chargers
This document summarizes a student project on a solar mobile phone charger. It begins with an introduction to the solar process, explaining that sunlight is composed of photons that transfer energy to electrons in solar cells. It then provides specifications of the solar panel, including an output voltage of 5.5V and current of 300-550mA. It notes that the charger can fully charge a typical mobile phone in about 60 minutes using direct current from the solar panel.
FOOT STEP POWER GENERATION
This document presents a seminar on footstep power generation systems. It introduces piezoelectric materials that can generate electric charges when pressure is applied. The system works by using piezoelectric transducers under a footstep arrangement to convert mechanical energy from footsteps into electrical energy. This variable voltage is stabilized and stored in a battery, then inverted to AC power. Footstep power generation has advantages like being renewable, eco-friendly, and requiring no external power or much maintenance. However, it also has high initial costs and implementation challenges. Potential applications include emergency power, agriculture, homes, and street lighting.
What's hot (20)
Foot Step Power Generation Using Piezoelectric Sensors
Foot Step Power Generation Using Piezoelectric Sensors
device generating elecricity by footstep using peizoelectic material
device generating elecricity by footstep using peizoelectic material
Power generation from shoes & utilize it to charge the mobile's, laptop's or ...
Power generation from shoes & utilize it to charge the mobile's, laptop's or ...
Power generation in footsteps by Piezoelectric materials
Power generation in footsteps by Piezoelectric materials
Viewers also liked
1-19
The document discusses different types of logical arguments including deductive and inductive arguments. It defines key terms like valid, sound, premises and conclusion. For deductive arguments it explains syllogisms like modus ponens and modus tollens. Inductive arguments rely on experience but do not guarantee truth, only probability. The document also discusses abductive arguments, fallacies, and necessary and sufficient conditions.
Palestra Semana Ecommerce
1) O documento apresenta as biografias de Sergio Lima e Ricardo Panini, sócios da empresa AD.Brazil, e descreve suas experiências profissionais.
2) A agenda inclui tópicos sobre redes sociais, promoção, planejamento, execução, divulgação, gestão e mensuração de campanhas digitais.
3) Será realizada uma dinâmica durante a palestra para sorteio de um iPad entre os participantes que tuitarem a resposta correta para uma pergunta sobre o conteúdo apresentado.
animaliak
Este documento lista diferentes animales, incluyendo: igela, loro, hartza, lepaluze, hartz txuria, geparodo, tigrea, oilarra, elefantea, usoa, zaldia, katagoria, foka, hamstera, pantera, sugea y txakurra.
Descargar Mapa MindMeister como imagen desde el móvil
El documento describe cómo exportar un mapa mental creado en la aplicación mindMeister como una imagen PNG desde un dispositivo móvil. Se debe hacer clic en el mapa, luego en "i", después en "exportar mapa", y finalmente seleccionar "PNG" para obtener el mapa como imagen que puede compartirse o subirse a Google Drive.
Tecnología e informática tafur (1)
La ley 1273 de 2009 busca proteger la información y datos de las personas y preservar los sistemas de tecnología e información. Los delitos informáticos incluyen hacer, enviar o producir información dañina, robar, producir o mostrar datos personales sin permiso. Los peligros informáticos en internet requieren ser cuidadosos con lo que se busca, dice y comparte, especialmente en redes sociales, debido a los riesgos asociados.
BPM Day SP 2016 - Data Science e BPM - Caso da Secretária no processo de regu...
1) O documento discute como maximizar resultados finais unificando abordagens de ciência de dados e gerenciamento de processos de negócios através de um estudo de caso na Secretaria de Regulação de Saúde Pública Estadual.
2) Foi desenvolvido um modelo conceitual unificando ciência de dados e gerenciamento de processos de negócios para melhorar os resultados no macroprocesso de regulação de saúde.
3) A aplicação do modelo na Secretaria de Saúde priorizou três processos de regulação e gerou econom
Webinnar - BPM para Além da Inovação por processos
O documento discute como a inovação em modelos de negócio está se tornando cada vez mais importante para as organizações e como o BPM pode contribuir para além da melhoria de processos internos. Ele aborda a evolução da economia em direção a experiências memoráveis e valor percebido pelo cliente e como o BPM pode ajudar a inovar em modelos de negócio e criar novas experiências.
Cidades Inteligentes: Interdisciplinaridade, Software Livre, Dados Abertos e ...
O documento discute o conceito de cidades inteligentes, abordando tópicos como: (1) como tornar as cidades mais inteligentes por meio da otimização dos recursos e uso de tecnologias; (2) definições de cidades inteligentes e dimensões interdisciplinares como economia, mobilidade e meio ambiente; (3) tecnologias como Internet das Coisas, Big Data e computação em nuvem; (4) iniciativas de cidades inteligentes ao redor do mundo e a importância do software livre.
Oa Resumen
El documento define objetos de aprendizaje como cualquier entidad digital o no que puede usarse con fines educativos o de entrenamiento. Explica que los objetos de aprendizaje pueden variar en tamaño y complejidad, desde imágenes hasta módulos o cursos enteros. Además, destaca que los objetos de aprendizaje deben ser reutilizables, modulares, flexibles y portátiles para facilitar el diseño instruccional y la personalización de la enseñanza.
Palestra Sobre Modelo de Negócios Canvas
O documento discute modelos de negócio e inovação em modelos de negócio. Apresenta o Business Model Canvas como uma ferramenta para discutir e implementar novos modelos de negócio. Explica que a implementação de novos modelos deve ser feita de forma iterativa, testando hipóteses com MVPs e métricas para validar a proposta de valor e canais antes de escalar.
Gestão de Processos e Projetos Estratégicos no MEC
O documento resume as atividades e desafios do Escritório de Gestão de Processos e Projetos Estratégicos (EGPPE) do Ministério da Educação brasileiro. O EGPPE apoia a gestão estratégica e dos processos do MEC por meio de planejamento, monitoramento e gestão de projetos. Seus principais desafios incluem consolidar sua atuação no MEC, gerenciar as ações intersetoriais do Plano Nacional de Educação e organizar informações para relatórios de gestão.
Gestão de processos integrando as diferentes dimensões da Dataprev
Gestão de processos integrando as diferentes dimensões da DataprevGestão Pública: Pensando Diferente
Palestra ministrada no 1º Fórum de Gestão Pública que ocorreu em Brasília nos dias 01 e 02 de outubro de 2015.Como vender pela internet em tempos de crise: com ou sem loja virtual
Apresentação "Como vender pela internet em tempos de crise: com ou sem loja virtual" por Vinícius Melo, Diretor Comercial da Rebellion Digital.
Resume_Numan_latest
Numan Domian is a software test engineer with over 15 years of experience in testing software, hardware, modems, and systems. He has expertise in developing test plans, troubleshooting issues, and collecting and analyzing test data. His background includes positions at Abbott Molecular and Qualcomm, where he led testing efforts, trained other engineers, and ensured products met requirements and quality standards.
Guia de Orientação para Carreira de Analista de Negócio
O documento é um guia de orientação para a carreira de analista de negócio que descreve as competências, conhecimentos, técnicas e práticas necessárias para analistas de negócio. O guia também discute definições, perfis de analistas de negócio, certificações e serviços de treinamento e consultoria em análise de negócio.
Nociones de hardware y soporte tecnico
Qué es el hardware, cuáles son sus componentes.
Periféricos de entrada y salida.
http://www.znet.com.ar
OMD chapter 2 Class modelling
The document discusses various object-oriented modeling concepts including objects, classes, attributes, operations, associations, generalization, and aggregation. It provides examples and definitions for each concept. Key topics covered include the definition of objects and classes, class diagrams showing attributes and operations, association types like one-to-one and many-to-many, using roles in associations, and the differences between aggregation and generalization relationships.
Redução de Custos e Desperdícios em Processos - Produtividade & Custos
O documento discute como aumentar a produtividade nas organizações através da redução de custos e desperdícios. Ele apresenta oito tipos de desperdícios que podem ocorrer em processos de acordo com a metodologia Lean, incluindo transporte, espera, superprodução, defeitos, processamento, movimentação, estoques e pessoas. Também discute abordagens tradicionais para melhoria de processos como identificação de problemas, análise de causas-raiz e proposição de soluções.
Behavioral modeling
Procedural Constructs
Procedural Assignments
Timing Control
Selection Statements
Iterative (Loop) Statements
Viewers also liked (20)
Descargar Mapa MindMeister como imagen desde el móvil
Descargar Mapa MindMeister como imagen desde el móvil
BPM Day SP 2016 - Data Science e BPM - Caso da Secretária no processo de regu...
BPM Day SP 2016 - Data Science e BPM - Caso da Secretária no processo de regu...
Webinnar - BPM para Além da Inovação por processos
Webinnar - BPM para Além da Inovação por processos
Cidades Inteligentes: Interdisciplinaridade, Software Livre, Dados Abertos e ...
Cidades Inteligentes: Interdisciplinaridade, Software Livre, Dados Abertos e ...
Gestão de Processos e Projetos Estratégicos no MEC
Gestão de Processos e Projetos Estratégicos no MEC
Gestão de processos integrando as diferentes dimensões da Dataprev
Gestão de processos integrando as diferentes dimensões da Dataprev
Como vender pela internet em tempos de crise: com ou sem loja virtual
Como vender pela internet em tempos de crise: com ou sem loja virtual
Guia de Orientação para Carreira de Analista de Negócio
Guia de Orientação para Carreira de Analista de Negócio
Redução de Custos e Desperdícios em Processos - Produtividade & Custos
Redução de Custos e Desperdícios em Processos - Produtividade & Custos
Similar to Solepower Technology
Motion of car- generation of electricity
this ppt will give you an idea about generating electricity by using the frictional force produced by the vehicle tyres in contact with the road, while it is in motion
Wireless charging system for electric vehicles using supercapacitor
Wireless charging system for electric vehicles using supercapacitor
HUMAN POWER OPERATED DEVICES
This document discusses utilizing human power as an alternative energy source. It presents several ways human power can be obtained directly through pedal power and bicycle generators or indirectly through gym and playground equipment. Examples are given of a gym that powers itself through stationary bicycles and a children's playground that stores energy from swings and seesaws. Additional devices discussed include a generator added to a revolving door, piezoelectric shoe inserts, and a seesaw design that uses springs and pneumatics to generate electricity. The objectives are to raise awareness of human power, utilize it for various energy needs, and introduce eco-friendly generation devices. Advantages include low-cost and availability while disadvantages note the energy required to sustain human power sources.
Solar Bag for mobile charging with battery status
This document is a project report submitted by four students for their Bachelor of Engineering degree. It presents the design and implementation of a solar bag for mobile charging with battery status indication. The introduction provides background on solar energy and outlines the advantages and applications of a solar bag. Subsequent chapters describe the components used, including solar panels, relays, voltage regulators, an ADC, microcontroller, and LCD. The literature survey reviews similar past projects. Later chapters discuss the project implementation including the block diagram, circuit design, and interfacing the LCD with the microcontroller. The conclusion describes the basic working model of the solar bag.
PPt of Foot Power Generator.pptx
This document describes a foot power generator project created by a group of students. The generator converts the kinetic energy from human footsteps into electrical energy. It uses a rack and pinion gear system connected to springs and a dynamo to transform the vertical motion of stepping on a plate into rotational motion that generates DC power. The summary provides an overview of the components, working mechanism, applications, advantages, and conclusions of the project to harness wasted footstep energy as an alternative power source.
Walk n charge
Walk-n-Charge is a project that aims to charge low-power devices like mobile phones and MP3 players through energy generated from walking. It uses either piezoelectric materials or small dynamos placed in shoes to convert the mechanical energy of walking into electrical energy to slowly charge devices. As the user walks, their strides pull a string attached to a dynamo that generates 3.5 watts of power, enough to extend a phone's battery life. The generated electricity is stored in batteries and can be used to charge devices. Walk-n-Charge stands to benefit users in rural areas by providing portable charging and helps the environment by reducing carbon emissions.
CSR project
This presentation proposes harvesting energy from human footsteps using piezoelectric materials. It discusses applications of piezoelectric energy harvesting in places with foot traffic like roads, rail stations, and offices. Piezoelectric sensors convert mechanical energy from footsteps into electrical energy, which is stored in a lead acid battery and used to power devices through an inverter. The piezoelectric effect and a company called Pavegen that has developed piezoelectric floor tiles are described. In conclusion, harvesting energy from human footsteps could provide an affordable energy solution for Bangladesh by managing energy usage.
Walk n charge (report)
Seminar report on waking and charging.
In this, we are generating electrical energy as non-conventional method by simply walking on the footstep.
Solar home lighting system
This document discusses a solar home lighting system. It begins by explaining the benefits of solar energy over non-renewable sources, as solar energy is renewable and does not pollute the atmosphere. It then describes how solar home lighting systems work, using solar panels to absorb sunlight, convert it to DC current, charge a battery, and power lights through an inverter. The document outlines the system's advantages, including reliability, reduced power outages, and lack of wiring infrastructure required. It concludes by recommending the Medors Renewable Energy company as a manufacturer of high-quality, affordable solar power products.
Preparing an electric chair to work with solar energy.pptx
Preparing an electric chair to work with solar energy
Solar photovotaic system
This document provides an overview of a practical training report on solar photovoltaic systems. It discusses the basics of solar PV arrays, including how they work, the materials used to make solar cells, and different types of solar cells. It also outlines the benefits of solar PV systems such as energy independence, reliability, low maintenance requirements, and the ability to generate power anywhere. The document then goes into more detail about topics like wiring arrays in parallel and series, batteries, inverters, controllers, and examples of solar lighting systems.
Footstep power generation system Final year be project
This project report summarizes a footstep power generation system developed by two students, Pankaj m mori and Sachin k dhakad. The report describes the design and implementation of a system that uses piezoelectric sensors to convert the mechanical energy from human footsteps into electrical energy. It provides details on the components used, including piezoelectric sensors, a rectifier, capacitor, and voltage meter. The report also discusses how piezoelectric materials generate voltage when pressure is applied and the various applications of such a footstep power generation system.
GENERATION OF ELECTRICITY THROUGH SPEED BREAKER
This document describes a project to generate electricity from speed breakers on roads. As vehicles pass over speed breakers, kinetic energy is wasted through heat and friction. This project aims to convert that wasted energy into electrical energy. It proposes installing movable speed breakers connected to a rack and pinion mechanism to convert vertical motion into rotational motion. This rotation would generate electricity using standard generators. The document outlines the working principle, components, advantages, and scope of the project. It aims to provide a sustainable energy source by tapping into kinetic energy from traffic on busy roads.
DESIGN AND FABRICATION OF ATTACHABLE WHEELCHAIR AUTOMATOR
This document describes the design and fabrication of an attachable automator for wheelchairs. It aims to make paraplegic patients more independent by converting their manual wheelchair into a motorized one. The automator attaches to existing wheelchairs through clamps and is powered by lithium-sulfur batteries. It uses a hub motor and disc brakes for safety. The automator is designed through CAD software and tested through simulation to be lightweight, durable, safe, and affordable at under Rs. 20,000. Its larger front wheel allows for uneven terrain. The automator seeks to improve mobility and quality of life for paraplegic patients in a cost-effective and sustainable manner.
FOOTSTEP%20POWER%20GENERATION.pptx
This document describes a project to generate electricity from footstep force using piezoelectric sensors. The system is intended to harness wasted human locomotion energy and convert it to usable electricity. It works by using piezoelectric crystals that generate a voltage when pressure is applied from stepping on them. This voltage can then be stored in a lead acid battery and used to power small electronic devices. The document outlines the components, working principle, advantages and potential applications of using this footstep power generation system in places with high foot traffic like train stations or malls.
Power Generation using Swing
This is proposed project with details of design and fabrication o a swing. Through which we can harness power.
final
This document describes a stair step power generation project presented by students. It discusses using the kinetic energy from human footsteps on stairs to power small electrical devices. The system works by converting the up and down motion of footsteps into rotational energy to turn a dynamo and generate electricity. It has advantages of being easy to construct, storing energy, and providing power independently without other energy sources or weather dependence. The document outlines the background, principles, construction, working, applications and advantages of the stair step power generation system.
MMTMRTS PowerPoint Presentation
Unity Infra Transit Project Implementers is presenting a feasibility study for a proposed Maglev monorail system called Puduvai Trans in Puducherry, India. The proposed 17.2 km route would have 16 elevated stations and be fully powered by a 2.5 MW solar power plant. The system would use magnetic levitation technology which provides a safer, more sustainable transit option for Puducherry's growing population.
PERSONAL PROJECT REPORT
This document provides details about Arian Mohamadi's personal project on creating a miniature hydroelectric power plant. The goals of the project are to spread awareness about hydroelectric power and encourage sustainable energy use. Arian will create a 3,800 word report and miniature model to demonstrate how hydroelectric power plants work. The project aligns with the global context of scientific and technical innovation. Arian developed guiding questions to stay on track to perfectly model the power plant and communicate findings effectively. Specifications for the miniature include an external power source to rotate the turbine, LED lights, and dual sockets to power the lights.
seminar_ppt_walk_and_charge[1].pptx
This document summarizes a seminar presentation titled "Walk and Charge" that describes a device that generates electricity from human leg movements while walking. The device is worn on the legs and uses a dynamo connected to leg strides to generate 3.5 Watts of power, enough to charge low-power devices like mobile phones. It works by converting kinetic energy from walking into electrical energy via a piezoelectric sensor, storing the energy, and then using it to charge devices. Advantages include providing mobile charging anywhere without fuels, and it could help reduce carbon emissions and increase mobile access in rural areas if widely adopted.
Similar to Solepower Technology (20)
Wireless charging system for electric vehicles using supercapacitor
Wireless charging system for electric vehicles using supercapacitor
Preparing an electric chair to work with solar energy.pptx
Preparing an electric chair to work with solar energy.pptx
Footstep power generation system Final year be project
Footstep power generation system Final year be project
DESIGN AND FABRICATION OF ATTACHABLE WHEELCHAIR AUTOMATOR
DESIGN AND FABRICATION OF ATTACHABLE WHEELCHAIR AUTOMATOR
Recently uploaded
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
From Natural Language to Structured Solr Queries using LLMs
This talk draws on experimentation to enable AI applications with Solr. One important use case is to use AI for better accessibility and discoverability of the data: while User eXperience techniques, lexical search improvements, and data harmonization can take organizations to a good level of accessibility, a structural (or “cognitive” gap) remains between the data user needs and the data producer constraints.
That is where AI – and most importantly, Natural Language Processing and Large Language Model techniques – could make a difference. This natural language, conversational engine could facilitate access and usage of the data leveraging the semantics of any data source.
The objective of the presentation is to propose a technical approach and a way forward to achieve this goal.
The key concept is to enable users to express their search queries in natural language, which the LLM then enriches, interprets, and translates into structured queries based on the Solr index’s metadata.
This approach leverages the LLM’s ability to understand the nuances of natural language and the structure of documents within Apache Solr.
The LLM acts as an intermediary agent, offering a transparent experience to users automatically and potentially uncovering relevant documents that conventional search methods might overlook. The presentation will include the results of this experimental work, lessons learned, best practices, and the scope of future work that should improve the approach and make it production-ready.
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
Principle of conventional tomography-Bibash Shahi ppt..pptx
before the computed tomography, it had been widely used.
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
What is an RPA CoE? Session 2 – CoE Roles
In this session, we will review the players involved in the CoE and how each role impacts opportunities.
Topics covered:
• What roles are essential?
• What place in the automation journey does each role play?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
High performance Serverless Java on AWS- GoTo Amsterdam 2024
Java is for many years one of the most popular programming languages, but it used to have hard times in the Serverless community. Java is known for its high cold start times and high memory footprint, comparing to other programming languages like Node.js and Python. In this talk I'll look at the general best practices and techniques we can use to decrease memory consumption, cold start times for Java Serverless development on AWS including GraalVM (Native Image) and AWS own offering SnapStart based on Firecracker microVM snapshot and restore and CRaC (Coordinated Restore at Checkpoint) runtime hooks. I'll also provide a lot of benchmarking on Lambda functions trying out various deployment package sizes, Lambda memory settings, Java compilation options and HTTP (a)synchronous clients and measure their impact on cold and warm start times.
ScyllaDB Tablets: Rethinking Replication
ScyllaDB is making a major architecture shift. We’re moving from vNode replication to tablets – fragments of tables that are distributed independently, enabling dynamic data distribution and extreme elasticity. In this keynote, ScyllaDB co-founder and CTO Avi Kivity explains the reason for this shift, provides a look at the implementation and roadmap, and shares how this shift benefits ScyllaDB users.
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
Session 1 - Intro to Robotic Process Automation.pdf
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
Mutation Testing for Task-Oriented Chatbots
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.A Deep Dive into ScyllaDB's Architecture
This talk will cover ScyllaDB Architecture from the cluster-level view and zoom in on data distribution and internal node architecture. In the process, we will learn the secret sauce used to get ScyllaDB's high availability and superior performance. We will also touch on the upcoming changes to ScyllaDB architecture, moving to strongly consistent metadata and tablets.
Recently uploaded (20)
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
From Natural Language to Structured Solr Queries using LLMs
From Natural Language to Structured Solr Queries using LLMs
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
Principle of conventional tomography-Bibash Shahi ppt..pptx
Principle of conventional tomography-Bibash Shahi ppt..pptx
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
High performance Serverless Java on AWS- GoTo Amsterdam 2024
High performance Serverless Java on AWS- GoTo Amsterdam 2024
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
Session 1 - Intro to Robotic Process Automation.pdf
Session 1 - Intro to Robotic Process Automation.pdf
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
Solepower Technology
- 1. Sanmarg Shikshan Sanstha’s Late Vasantdada Polytechnic Seminar on:- Presented by:- Sohail Pathan Rajesh Barapatre P o w e r b y W a l k i n g Guided by:- Ms. Sheetal Chore Mam
- 2. Contents » How it Work ? » Advantages » Conclusion » Uses » Specification » History.... » What Is Solepower ?
- 3. Why SolePower??? In , this Century or Time the Power/charge is most problemetic question. The future of power is a strange one. We're still a long way off from Unlimited power everywhere – so what's coming next to keep us charged? We have The Solution,It Is………. SolePower
- 4. What is Solepower :- The Solepower is a technology which create the charge Powered by Walking :- Solepower is nothing but Defined as, A sole that powered your device as when walk. The idea is that you slip the sole in your shoes and as walk it charge a battery that can juice up your device.
- 5. History • In 2011, a group of mechanical engineers studying at Carnegie Mellon University were told by their professor to “make a product that will benefit students on campus.” The result was an energy harvesting shoe with embedded LED lights, allowing users to travel more safely at night. The product earned the group an ‘A’, but for two of the members it was the start of a new company – SolePower.
- 6. • This two Members are Hahna Alexander and Matt Stanton both saw greater potential in the prototype. By making the device more powerful, slimmer, and capable of storing the generated power, they could create a product that solved a problem for people around the world • Today, SolePower insoles are a power source as mobile as the devices they charge. They generate on-the-go, renewable power that will serve as an innovative, mobile energy solution for people around the world.
- 7. How it works? • It’s mechanism devided in Three parts. Energy Capturation / Power Generation / Energy storation
- 8. Energy Capturation:- The Energy Capturation is a Process when we give the energy to shoe throw walking And Running to the coil of sole. This Energy Is Mechanichal Energy.
- 9. Power Generation:- In this Process the charge is formed. And the Mechanichal Energy is converted into Electrical Energy. For Purpose of Battery
- 10. Energy Storation:- After, In this Process the Power generatd while walking is stored in an PowerPack,And also in Battery..
- 11. Specificattion The Battery Will Charge Throw Two Device OR Equipment Direct Sole to Battery PowerPack This PowerPack is Used for Non-Removable battery Phone’s to case and secure Eg. iphone etc
- 12. Advantages • THE Device can charge the battery speedly and efficiantly. • The battery will fully charged , walking between 2 to 3 kilometers Range… • The battery are safe ,Can’t be explod and Proofing by the water in this method .. • The L.E.D will blinked when the Battery or Handset is Fully charged
- 13. Uses & Application …..This device is use as a portable Charger OR Power generator …. We Can use this technology in some areas which don’t a electricity. Eg.. Hillstations, villages etc…
- 14. C o n c l u s I o n … The Possibilites are the uses of this technology is increase …Peoples were attracted and interested in this solepower. … The goal of this technology is..
- 15. ReFrenCe Via……. • www.solepowertech.com • www.technology.com • www.wikepedia.com