Solarizer elite data sheet
•
0 likes•107 views
A Solar Water Heater that blends fine water heating experience with impeccable efficiency, Solarizer Elite performs off the charts. Solarizer Elite’s unique glass-enameled tank keeps your water clean by preventing corrosion and the build-up of bacteria. This extends the Solar Water Heater's lifespan and performance metrics whilst delivering the features it entails. Solarizer Elite has been designed to exceed your expectations with respect to water heating. All the design metrics are rigorously engineered to provide you with an “Elite” experience in solar water heating.
Report
Share
Report
Share
Download to read offline
Recommended
Boiler problems
The boiler is the main functioning component of any steam power plant. Ideally speaking, the efficiency of old boiler systems lay in between the range of 56% - 70%. Through a persistent research in the field of boilers and better and newer technologies kicking in at a faster rate, efficiencies up to 90% have been achieved.
5 Basic Problems in Boiler
1. Priming
2. Foaming
3. Carry-over
4. Scaling
5. Corrosion
Blast furnace-Top temperature and process efficiency
1) Moisture in the coke and ore burden must be removed before the reduction process can start in the blast furnace. Additional water is generated from coal and natural gas injectants.
2) Wall areas are difficult to dry due to high burden thickness and lower gas temperatures from cooling losses. Skin flow temperatures and in-burden probes are used to monitor drying at the wall.
3) If moisture input increases, the temperature where reduction starts will descend, making the process less efficient and requiring more direct reduction in the lower furnace. Insufficient drying capacity can negatively impact furnace efficiency and productivity.
Blast furnace process-Drain rate vs cating rate pdf 29 07 2020
1. Drain rate, or the rate at which melt is removed from the furnace, should be higher than the production rate in order to prevent a build up of liquid levels in the hearth.
2. On cast time refers to the amount of time that tap holes remain open to drain liquid from the furnace. A longer on cast time supports achieving a higher drain rate than the production rate.
3. If drain rate is not higher than production rate, high liquid levels in the hearth can negatively impact burden descent and gas distribution patterns in the furnace.
Blast furnace-Inconsistent blowing and its effects
The document discusses issues that can arise from frequent stoppages and inconsistent operation of blast furnaces, including an inactive deadman. An inactive deadman occurs when the space between the hearth walls and cooled bottom solidifies, inhibiting heat transfer and slowing production. This can be exacerbated by low production rates, hearth cooling, and maintenance stops. Signs of an inactive deadman include decreased slag ratio, lower carbon content in hot metal, and higher hot metal temperatures. Measures are needed to push heat into the deadman such as maintaining high wind rates and temperatures.
BOILER PROBLEMS
Boiler and Boiler Feed Water
Boiler Problems
Sludge and Scale Formation
Priming
Foaming
Carry Over
Boiler Corrosion
Caustic Embrittlement
Damage mechanism in boiler (thermal power plant)
The document discusses various damage mechanisms that can occur in boilers used in thermal power plants, including corrosion fatigue, thermal mechanical fatigue, creep fatigue, and others. It provides details on where each type of damage occurs and examples of specific locations it may be found, such as tube to header welds, bends, and attachments in various boiler sections.
Clinker formation
This document provides information on four types of cement kiln coolers: planetary coolers, rotary coolers, grate coolers, and cross-bar coolers. It focuses on describing the design and operation of planetary coolers in detail. Planetary coolers consist of multiple rotating cooler tubes attached directly to the kiln that cascade clinker through counterflowing air. They provide good heat transfer efficiency but have higher clinker exit temperatures than grate coolers. The document also provides typical heat loss figures for a planetary cooler.
Power plant engineering micro project
This document discusses fluidized bed combustion boilers. It begins with an introduction that fluidized bed combustion has emerged as a viable alternative to traditional grate firing systems for low quality coal in India. It provides a brief history of the development of fluidized bed combustion. It then describes the three main types of fluidized bed combustion boilers and the basic mechanism of how fluidized bed combustion works. The document proceeds to describe the key components of a circulating fluidized bed combustion system and provides maintenance tips for inspecting and maintaining a CFB boiler.
Recommended
Boiler problems
The boiler is the main functioning component of any steam power plant. Ideally speaking, the efficiency of old boiler systems lay in between the range of 56% - 70%. Through a persistent research in the field of boilers and better and newer technologies kicking in at a faster rate, efficiencies up to 90% have been achieved.
5 Basic Problems in Boiler
1. Priming
2. Foaming
3. Carry-over
4. Scaling
5. Corrosion
Blast furnace-Top temperature and process efficiency
1) Moisture in the coke and ore burden must be removed before the reduction process can start in the blast furnace. Additional water is generated from coal and natural gas injectants.
2) Wall areas are difficult to dry due to high burden thickness and lower gas temperatures from cooling losses. Skin flow temperatures and in-burden probes are used to monitor drying at the wall.
3) If moisture input increases, the temperature where reduction starts will descend, making the process less efficient and requiring more direct reduction in the lower furnace. Insufficient drying capacity can negatively impact furnace efficiency and productivity.
Blast furnace process-Drain rate vs cating rate pdf 29 07 2020
1. Drain rate, or the rate at which melt is removed from the furnace, should be higher than the production rate in order to prevent a build up of liquid levels in the hearth.
2. On cast time refers to the amount of time that tap holes remain open to drain liquid from the furnace. A longer on cast time supports achieving a higher drain rate than the production rate.
3. If drain rate is not higher than production rate, high liquid levels in the hearth can negatively impact burden descent and gas distribution patterns in the furnace.
Blast furnace-Inconsistent blowing and its effects
The document discusses issues that can arise from frequent stoppages and inconsistent operation of blast furnaces, including an inactive deadman. An inactive deadman occurs when the space between the hearth walls and cooled bottom solidifies, inhibiting heat transfer and slowing production. This can be exacerbated by low production rates, hearth cooling, and maintenance stops. Signs of an inactive deadman include decreased slag ratio, lower carbon content in hot metal, and higher hot metal temperatures. Measures are needed to push heat into the deadman such as maintaining high wind rates and temperatures.
BOILER PROBLEMS
Boiler and Boiler Feed Water
Boiler Problems
Sludge and Scale Formation
Priming
Foaming
Carry Over
Boiler Corrosion
Caustic Embrittlement
Damage mechanism in boiler (thermal power plant)
The document discusses various damage mechanisms that can occur in boilers used in thermal power plants, including corrosion fatigue, thermal mechanical fatigue, creep fatigue, and others. It provides details on where each type of damage occurs and examples of specific locations it may be found, such as tube to header welds, bends, and attachments in various boiler sections.
Clinker formation
This document provides information on four types of cement kiln coolers: planetary coolers, rotary coolers, grate coolers, and cross-bar coolers. It focuses on describing the design and operation of planetary coolers in detail. Planetary coolers consist of multiple rotating cooler tubes attached directly to the kiln that cascade clinker through counterflowing air. They provide good heat transfer efficiency but have higher clinker exit temperatures than grate coolers. The document also provides typical heat loss figures for a planetary cooler.
Power plant engineering micro project
This document discusses fluidized bed combustion boilers. It begins with an introduction that fluidized bed combustion has emerged as a viable alternative to traditional grate firing systems for low quality coal in India. It provides a brief history of the development of fluidized bed combustion. It then describes the three main types of fluidized bed combustion boilers and the basic mechanism of how fluidized bed combustion works. The document proceeds to describe the key components of a circulating fluidized bed combustion system and provides maintenance tips for inspecting and maintaining a CFB boiler.
Boiler
This boiler report is full of alot of knowledge,and this will helpful for those who have interest in boiler operation.
Seeds
1. The document discusses chemical and physical processes involved in glass melting, including melting-in of raw materials, kinetics of sand dissolution, removal of gas bubbles and dissolved gases, evaporation processes, and homogenization.
2. Tools for analyzing industrial glass melting processes are described, including computational fluid dynamics (CFD) simulation models that can provide temperature distributions, flow characteristics, and residence time distributions in the melt.
3. The melting-in process involves chemical reactions of raw materials like carbonates and silica, formation of primary melt phases, decomposition of carbonates, and dissolution of silica and other materials into the melt phases. Kinetics are determined by heat transfer through the batch blanket.
Blast furnace process-Dry and wet coke in blast furnace
The document discusses various issues that may arise when changing from dry to wet coke operation in a blast furnace and the process control methods needed. Specifically, it mentions screen jams, changes in coke surface properties, difficulties maintaining coke bunker levels, and potential process upsets due to changes in burden distribution, temperature control, gas control, and chemical control. It provides guidance on thermal control, gas flow control, chemical control, and definitions of an "out of control" furnace. It also summarizes the effects of potential issues like burden slips, contaminated coke bins, and low bin levels, and outlines steps operators can take to monitor and address such issues.
111658903 kiln-burning-systems
The pyroprocessing stage of cement manufacturing involves heating raw materials in a kiln to produce clinker. This is done using various kiln systems that transfer heat from hot exhaust gases to preheat the raw materials. Early systems included wet and long dry kilns, while improved systems like the Lepol and cyclone preheater kilns transfer heat more efficiently using mechanisms like traveling grate preheaters and cyclone separators to further reduce fuel consumption and increase production rates. The pyroprocessing stage is critical as it determines the clinker composition and involves the most operating costs.
Tutorial on roasting furnaces s.d.kahar
The document provides an overview of different types of roasting furnaces used to oxidize or chemically treat mineral ores. It describes multiple hearth roasters, fluidized bed roasters, flash roasters, and sinter/blast roasters. Multiple hearth roasters slowly roast ore in a countercurrent design with multiple horizontally stacked hearths. Fluidized bed roasters suspend fine ore particles in an upward gas stream. Flash and sinter/blast roasters can roast larger throughputs of finer ore particles using combustion gases. The document outlines factors that influence roasting processes and furnace selection based on desired product characteristics.
Engineering tips for sampling systems [Piramoon & Buhler Technologies], by Po...
review some tips for the gas sampling system design and review the features of the recent Buhler technology products.
Duplex
This document describes a duplex forming press machine that thermoforms solid surface materials like stone, acrylic, and polyester sheets using a vacuum membrane process. The machine has a 3000x1300mm heating oven and 950mm forming press that use heat and 0.5kg/cm2 of vacuum pressure to form materials in 3-5 minute cycles. Optional upgrades include improved vacuum circuits to reduce forming time and cooling coils to speed cooling for larger shapes. The machine precisely thermoforms materials for kitchens, bathrooms and interiors.
Magnetite layer
A magnetite layer forms on metal surfaces in contact with water or steam in steam generators. This layer protects the base metal from corrosion. However, under certain conditions like intermittent loading or system draining and refilling after outages, the protective magnetite layer can break down and dissolve in flowing water. This leads to flow accelerated corrosion that reduces the protective oxide layer and removes base metal material. Suggested actions to address this include reducing the dose of oxygen scavenger added to boiler feedwater to avoid thick magnetite buildup, analyzing deposit samples, and properly flushing and refilling HRSG systems after outages.
ppt. clg
The document discusses two options to improve super heaters in AFBC boilers. The first option is designing radiant super heaters that avoid problems with bed super heaters like clinker formation and space constraints. Radiant super heaters have a longer replacement period of 25 years. The second option is coating existing bed super heater tubes with infiltration brazed tungsten carbide cladding, which reduces corrosion and erosion while increasing tube life four times. Both options greatly increase super heater availability.
How to Improve Boiler Efficiency Tips by Experts
Scale forms on boiler surfaces when minerals in water settle out and accumulate. This scale acts as an insulator, reducing heat transfer and increasing fuel usage. Several tips are provided to improve boiler efficiency, such as maintaining water treatment to prevent scale, regularly cleaning fireside and waterside surfaces, installing economizers to recover heat from flue gases, properly sizing and insulating the boiler and steam distribution system, and operating the boiler at the minimum pressure required. Maintaining clean surfaces, recovering waste heat, and optimizing the operating conditions can significantly increase efficiency and reduce fuel costs.
Fuels & fueling methods used in the blast furnace
1. The document discusses various fuels used in blast furnaces for the production of pig iron, including metallurgical coke, natural gas, coke oven gas, and liquid oil-coal slurries.
2. Metallurgical coke is the primary fuel as it provides both heat as a reductant and carbon monoxide for the reduction of iron oxides. Physical and chemical properties of coke that impact blast furnace operations are described.
3. Alternate solid and liquid/gaseous fuels that can be used include briquetted form coke, fuel oils, natural gas, and coke oven gas injected through pipes in the stack region. The use of these alternate fuels
Presentation (3)
This document discusses various methods to control temperature in concrete dams to prevent cracking. It describes precooling concrete ingredients before mixing to lower the temperature, and post-cooling placed concrete by circulating cold water through embedded pipes to dissipate heat. It also discusses modifying the concrete mix design to reduce heat generation through using minimum cement, replacing cement with pozzolanas, or using special low-heat cement. The goal is to control temperature rise and shrinkage stresses that could otherwise cause cracking in the large concrete structures of dams.
Product Catalog - NIKISAE ENGINEERING
This document provides product catalog specifications for various HVAC and insulation materials supplied by Nikisae Engineering. It lists specifications for pipe insulation made of rock wool and aluminum, chiller installation pipes made of stainless steel and rubber or PU and aluminum, galvanized steel piping for water cooling towers operating between 26-28C, ducting made of ductal at 15-20C, and dehumidifiers by Panasonic at 18-20C humidity of 45-50%. Contact information is provided for Nikisae Engineering in Sidoarjo, East Java, Indonesia.
3furnaces 120520160438-phpapp01
There are several types of furnaces used for melting metals in metal casting, with the choice depending on the type of metal and production needs. Crucible furnaces are small and suitable for batch processes, melting metal in crucibles heated indirectly. Cupola furnaces are tall cylinders that melt iron and alloys by layering them with coke and limestone and heating from the bottom. Reverberatory furnaces heat metal to melting through indirect radiation from burners on refractory walls. Induction furnaces use an induction coil powered by alternating current to generate a magnetic field and directly heat electrically conductive materials without contact.
Red river in clinker cooler
1. Fine, dusty clinker leads to segregation in the kiln and non-uniform clinker beds in coolers due to differences in particle size and density.
2. When high-velocity cooling air hits closely-packed fine clinker dust, the air is heated, expands, and fluidizes the dust causing it to flow rapidly down the cooler in a "red river."
3. Newer cooler designs use stationary inclined grates and mechanical air flow regulators to better control air distribution and reduce issues caused by red rivers of fine, hot clinker dust.
Vacuum plasma hardening
Vacuum and plasma surface hardening are heat treatment processes carried out in low-pressure environments to impart high wear resistance and mechanical properties to steel components. Vacuum surface hardening involves heating steel above 1000°C in a vacuum to allow uniform hardening without oxidation. Plasma surface hardening uses ionized gas plasma to accelerate the carburizing or nitriding process, allowing shorter cycle times and treatment of materials prone to oxidation. Both methods provide oxide-free surfaces and excellent mechanical properties but require higher initial capital costs than conventional carburizing.
gas welding report
1. The document describes gas welding, which uses an oxy-acetylene flame produced by combusting acetylene and oxygen.
2. Equipment for gas welding consists of oxygen and acetylene cylinders equipped with pressure regulators, hoses, and a welding torch that mixes the gases.
3. Various parameters of the welding flame such as composition, velocity, and nozzle size can be adjusted to suit different materials and thicknesses being welded.
Chap 01
The document provides an overview of steam generation and steam generators. It discusses how steam generators convert water into steam through boiling for applications like power generation and industrial heating. Steam generators can range in size from small package boilers producing 1000 lb/h of steam to large utility boilers producing over 10 million lb/h. Key components of steam generation systems include the steam generator, turbines, condensers, pumps, and sometimes nuclear reactors or pollution control devices.
Pet coke in cement clinker
Petroleum coke is a byproduct of the oil refining process with a high calorific value and lower cost than coal. It can be used in cement production, with limitations on the amount used due to its high sulfur content. Using petcoke up to 24% as a substitute for existing fuel in a cement plant can maintain acceptable sulfur ratios and volatile matter levels in the clinker and coal mix, while lowering fuel costs. However, its abrasive nature and difficulty burning require modifications to equipment for effective utilization in kilns and calciners.
Catalog -sunhome
Jiangsu Sunhome New Energy Co., Ltd. is a leading Chinese manufacturer of solar energy products since 1998. They produce high-quality solar water heaters and collectors for domestic and commercial use. Their products meet European and other international standards and have been exported to over 76 countries worldwide. Sunhome specializes in heat pipe solar collectors and flat plate collectors in various sizes to suit different applications.
Solarizer ultra data sheet
Solarizer Ultra is the best solar water heating solution for hard water thus delivering excellent results with any type of water. Using the latest technology and the highest quality manufacture from the house of Emmvee, Solarizer Ultra meets your water heating needs even in the hardest water conditions, without the worry of corrosion, leaks or blockages thus making the Solar Water Heater the best in terms of extreme performance.
So if you want an “Ultra” performance from a solar water heater using “Hard water” or some extreme conditions, Solarizer Ultra is your ultimate choice.
Solarizer spring data sheet
A lightweight yet powerful solar water heater that delivers optimum solar water heating. The solar water heater fits perfectly anywhere thanks to its sturdy and compact design. Solarizer Spring is your regular solar water heater but its performance parallels the excellent ones. Solarizer Spring looks elegant on the outside but its solid performance in terms of water heating takes the limelight anyway.
More Related Content
What's hot
Boiler
This boiler report is full of alot of knowledge,and this will helpful for those who have interest in boiler operation.
Seeds
1. The document discusses chemical and physical processes involved in glass melting, including melting-in of raw materials, kinetics of sand dissolution, removal of gas bubbles and dissolved gases, evaporation processes, and homogenization.
2. Tools for analyzing industrial glass melting processes are described, including computational fluid dynamics (CFD) simulation models that can provide temperature distributions, flow characteristics, and residence time distributions in the melt.
3. The melting-in process involves chemical reactions of raw materials like carbonates and silica, formation of primary melt phases, decomposition of carbonates, and dissolution of silica and other materials into the melt phases. Kinetics are determined by heat transfer through the batch blanket.
Blast furnace process-Dry and wet coke in blast furnace
The document discusses various issues that may arise when changing from dry to wet coke operation in a blast furnace and the process control methods needed. Specifically, it mentions screen jams, changes in coke surface properties, difficulties maintaining coke bunker levels, and potential process upsets due to changes in burden distribution, temperature control, gas control, and chemical control. It provides guidance on thermal control, gas flow control, chemical control, and definitions of an "out of control" furnace. It also summarizes the effects of potential issues like burden slips, contaminated coke bins, and low bin levels, and outlines steps operators can take to monitor and address such issues.
111658903 kiln-burning-systems
The pyroprocessing stage of cement manufacturing involves heating raw materials in a kiln to produce clinker. This is done using various kiln systems that transfer heat from hot exhaust gases to preheat the raw materials. Early systems included wet and long dry kilns, while improved systems like the Lepol and cyclone preheater kilns transfer heat more efficiently using mechanisms like traveling grate preheaters and cyclone separators to further reduce fuel consumption and increase production rates. The pyroprocessing stage is critical as it determines the clinker composition and involves the most operating costs.
Tutorial on roasting furnaces s.d.kahar
The document provides an overview of different types of roasting furnaces used to oxidize or chemically treat mineral ores. It describes multiple hearth roasters, fluidized bed roasters, flash roasters, and sinter/blast roasters. Multiple hearth roasters slowly roast ore in a countercurrent design with multiple horizontally stacked hearths. Fluidized bed roasters suspend fine ore particles in an upward gas stream. Flash and sinter/blast roasters can roast larger throughputs of finer ore particles using combustion gases. The document outlines factors that influence roasting processes and furnace selection based on desired product characteristics.
Engineering tips for sampling systems [Piramoon & Buhler Technologies], by Po...
review some tips for the gas sampling system design and review the features of the recent Buhler technology products.
Duplex
This document describes a duplex forming press machine that thermoforms solid surface materials like stone, acrylic, and polyester sheets using a vacuum membrane process. The machine has a 3000x1300mm heating oven and 950mm forming press that use heat and 0.5kg/cm2 of vacuum pressure to form materials in 3-5 minute cycles. Optional upgrades include improved vacuum circuits to reduce forming time and cooling coils to speed cooling for larger shapes. The machine precisely thermoforms materials for kitchens, bathrooms and interiors.
Magnetite layer
A magnetite layer forms on metal surfaces in contact with water or steam in steam generators. This layer protects the base metal from corrosion. However, under certain conditions like intermittent loading or system draining and refilling after outages, the protective magnetite layer can break down and dissolve in flowing water. This leads to flow accelerated corrosion that reduces the protective oxide layer and removes base metal material. Suggested actions to address this include reducing the dose of oxygen scavenger added to boiler feedwater to avoid thick magnetite buildup, analyzing deposit samples, and properly flushing and refilling HRSG systems after outages.
ppt. clg
The document discusses two options to improve super heaters in AFBC boilers. The first option is designing radiant super heaters that avoid problems with bed super heaters like clinker formation and space constraints. Radiant super heaters have a longer replacement period of 25 years. The second option is coating existing bed super heater tubes with infiltration brazed tungsten carbide cladding, which reduces corrosion and erosion while increasing tube life four times. Both options greatly increase super heater availability.
How to Improve Boiler Efficiency Tips by Experts
Scale forms on boiler surfaces when minerals in water settle out and accumulate. This scale acts as an insulator, reducing heat transfer and increasing fuel usage. Several tips are provided to improve boiler efficiency, such as maintaining water treatment to prevent scale, regularly cleaning fireside and waterside surfaces, installing economizers to recover heat from flue gases, properly sizing and insulating the boiler and steam distribution system, and operating the boiler at the minimum pressure required. Maintaining clean surfaces, recovering waste heat, and optimizing the operating conditions can significantly increase efficiency and reduce fuel costs.
Fuels & fueling methods used in the blast furnace
1. The document discusses various fuels used in blast furnaces for the production of pig iron, including metallurgical coke, natural gas, coke oven gas, and liquid oil-coal slurries.
2. Metallurgical coke is the primary fuel as it provides both heat as a reductant and carbon monoxide for the reduction of iron oxides. Physical and chemical properties of coke that impact blast furnace operations are described.
3. Alternate solid and liquid/gaseous fuels that can be used include briquetted form coke, fuel oils, natural gas, and coke oven gas injected through pipes in the stack region. The use of these alternate fuels
Presentation (3)
This document discusses various methods to control temperature in concrete dams to prevent cracking. It describes precooling concrete ingredients before mixing to lower the temperature, and post-cooling placed concrete by circulating cold water through embedded pipes to dissipate heat. It also discusses modifying the concrete mix design to reduce heat generation through using minimum cement, replacing cement with pozzolanas, or using special low-heat cement. The goal is to control temperature rise and shrinkage stresses that could otherwise cause cracking in the large concrete structures of dams.
Product Catalog - NIKISAE ENGINEERING
This document provides product catalog specifications for various HVAC and insulation materials supplied by Nikisae Engineering. It lists specifications for pipe insulation made of rock wool and aluminum, chiller installation pipes made of stainless steel and rubber or PU and aluminum, galvanized steel piping for water cooling towers operating between 26-28C, ducting made of ductal at 15-20C, and dehumidifiers by Panasonic at 18-20C humidity of 45-50%. Contact information is provided for Nikisae Engineering in Sidoarjo, East Java, Indonesia.
3furnaces 120520160438-phpapp01
There are several types of furnaces used for melting metals in metal casting, with the choice depending on the type of metal and production needs. Crucible furnaces are small and suitable for batch processes, melting metal in crucibles heated indirectly. Cupola furnaces are tall cylinders that melt iron and alloys by layering them with coke and limestone and heating from the bottom. Reverberatory furnaces heat metal to melting through indirect radiation from burners on refractory walls. Induction furnaces use an induction coil powered by alternating current to generate a magnetic field and directly heat electrically conductive materials without contact.
Red river in clinker cooler
1. Fine, dusty clinker leads to segregation in the kiln and non-uniform clinker beds in coolers due to differences in particle size and density.
2. When high-velocity cooling air hits closely-packed fine clinker dust, the air is heated, expands, and fluidizes the dust causing it to flow rapidly down the cooler in a "red river."
3. Newer cooler designs use stationary inclined grates and mechanical air flow regulators to better control air distribution and reduce issues caused by red rivers of fine, hot clinker dust.
Vacuum plasma hardening
Vacuum and plasma surface hardening are heat treatment processes carried out in low-pressure environments to impart high wear resistance and mechanical properties to steel components. Vacuum surface hardening involves heating steel above 1000°C in a vacuum to allow uniform hardening without oxidation. Plasma surface hardening uses ionized gas plasma to accelerate the carburizing or nitriding process, allowing shorter cycle times and treatment of materials prone to oxidation. Both methods provide oxide-free surfaces and excellent mechanical properties but require higher initial capital costs than conventional carburizing.
gas welding report
1. The document describes gas welding, which uses an oxy-acetylene flame produced by combusting acetylene and oxygen.
2. Equipment for gas welding consists of oxygen and acetylene cylinders equipped with pressure regulators, hoses, and a welding torch that mixes the gases.
3. Various parameters of the welding flame such as composition, velocity, and nozzle size can be adjusted to suit different materials and thicknesses being welded.
Chap 01
The document provides an overview of steam generation and steam generators. It discusses how steam generators convert water into steam through boiling for applications like power generation and industrial heating. Steam generators can range in size from small package boilers producing 1000 lb/h of steam to large utility boilers producing over 10 million lb/h. Key components of steam generation systems include the steam generator, turbines, condensers, pumps, and sometimes nuclear reactors or pollution control devices.
Pet coke in cement clinker
Petroleum coke is a byproduct of the oil refining process with a high calorific value and lower cost than coal. It can be used in cement production, with limitations on the amount used due to its high sulfur content. Using petcoke up to 24% as a substitute for existing fuel in a cement plant can maintain acceptable sulfur ratios and volatile matter levels in the clinker and coal mix, while lowering fuel costs. However, its abrasive nature and difficulty burning require modifications to equipment for effective utilization in kilns and calciners.
What's hot (19)
Blast furnace process-Dry and wet coke in blast furnace
Blast furnace process-Dry and wet coke in blast furnace
Engineering tips for sampling systems [Piramoon & Buhler Technologies], by Po...
Engineering tips for sampling systems [Piramoon & Buhler Technologies], by Po...
Similar to Solarizer elite data sheet
Catalog -sunhome
Jiangsu Sunhome New Energy Co., Ltd. is a leading Chinese manufacturer of solar energy products since 1998. They produce high-quality solar water heaters and collectors for domestic and commercial use. Their products meet European and other international standards and have been exported to over 76 countries worldwide. Sunhome specializes in heat pipe solar collectors and flat plate collectors in various sizes to suit different applications.
Solarizer ultra data sheet
Solarizer Ultra is the best solar water heating solution for hard water thus delivering excellent results with any type of water. Using the latest technology and the highest quality manufacture from the house of Emmvee, Solarizer Ultra meets your water heating needs even in the hardest water conditions, without the worry of corrosion, leaks or blockages thus making the Solar Water Heater the best in terms of extreme performance.
So if you want an “Ultra” performance from a solar water heater using “Hard water” or some extreme conditions, Solarizer Ultra is your ultimate choice.
Solarizer spring data sheet
A lightweight yet powerful solar water heater that delivers optimum solar water heating. The solar water heater fits perfectly anywhere thanks to its sturdy and compact design. Solarizer Spring is your regular solar water heater but its performance parallels the excellent ones. Solarizer Spring looks elegant on the outside but its solid performance in terms of water heating takes the limelight anyway.
ALL PRODUCTS -KONDAAS SOLAR
With over 100,000 users, and 2 decades of experience, Kondass, is the leader in Solar products, UPS systems and servo stabilizers.
Kondaas products are conceived and developed at world - class R&D center and manufactured at our state -of-the-art plant on completely automated process. Every day, the products, we manufacture, Service and distribute, accelerates and energizes, businesses, Industries, homes, hospitals and schools and elevates the quality of life.
Combining deep local insights, and a relentless commitment to operational excellence and values.
We help our customers to grow through reliable UPS and Solar System. We operate in extremely diverse markets, ranging from a small ups to power one computer or one small hut to large machineries or an entire Hospital. Everywhere we operate, we believe that dependable Power Systems is essential to human progress and to advancing economic growth, public health and security.
Solartec Global | Haier Solar Hot Water Systems
Solartec Global Limited is proud to distribute Haier Solar Hot Water Systems. Available in 180L and 300L systems. The flat collectors are ideal for tropical climates and reduce the cost of accessing hot water.
Spring
The document provides specifications for an Emmvee solar water heater system. The hot water storage tank specifications include a glass enamel coated steel tank with 50mm thick CFC free PUF insulation. The collector specifications include a single sheet absorber with a high selective coating (95% absorptivity, 4.7% emissivity) bonded to copper risers and header via brazing and lasers welding. The collector is 2m2 in size, made of extruded aluminum with a glass cover. The system is available in tank sizes of 100, 200, 300 and 500 liters and has a gray powder coated mild steel mounting structure.
Heaters
These heaters are designed to prevent condensation and ensure a minimum operating temperature in small enclosures. They use PTC resistors for self-regulating temperature control and have an aluminum or aluminum alloy body. Models vary in heating capacity from 5W to 150W and are intended for permanent operation with voltages from 120-250V AC/DC. Technical specifications include IP protection classes, approvals from certification bodies, connection types, and temperature range ratings.
Wolf ATEX Turbolites - Spec Sheet
The ATEX Turbolite is a high-powered compressed air lamp that meets European and American safety standards for use in explosive atmospheres. It provides illumination for hazardous industrial activities like tank cleaning and pipeline work. Models include area lights and flood lights available in aluminum or brass housings. The lamp is powered by a turbine driven by compressed air, which generates electricity to power a halogen bulb. It has improvements like sealed bearings and stainless steel components for greater reliability.
Zone 1 Lighting, Hazardous Area (ATEX) - Ex de - Petrel 620 Well Glass
Zone 1 Lighting, Hazardous Area (ATEX) - Ex de - Petrel 620 Well GlassThorne & Derrick International
Zone 1 Lighting, Hazardous Area (ATEX) - Ex de
Petrel 620 Wellglass Light for Hazardous Areas
Petrel hazardous area wellglass (ATEX certified) Zone 1 lighting is extensively specified for Ex de lighting applications - Petrel 620 wellglass features lamp option range, high ambient operating temperatures, rapid re-lamping and gear access and and integral Ex e terminal chamber.
Petrel Hazardous Area Zone 1 Lighting (ATEX) - EEX de
Petrel 620 Well Glass
Heavy duty versatile wellglass for Zone 1 hazardous areas can be supplied with a range of light sources from GLS to SON and long life QL lamps. Power wattages up to 250 watts may be installed in the Zone 1 hazardous area equipment. Petrel 620 wellglass lighting is suitable for Zone 1 gas and dust environments - this ATEX wellglass features an integral terminal chamber, external earthing and fixed or pivot mounting brackets. Coloured glass versions of the hazardous area well glass light can be supplied with optional internal or external reflectors. Bulkhead version available for low profile lighting applications - SIRA certified. See : Zone 1 Lighting, Hazardous Area (ATEX) - Ex de - Petrel 621 Bulkhead.
Hazardous area Zone 1 wellglass lamp options : 150w SON-E and 250w SON-I, 125w and 250w HPMV MBF and up to 300w GLS, 25w SL or 20w PLCE.
Hazardous Area, Zone 1 Certification : EEx de II 2 GD IIC T2 – T6
Zone 1 Lighting, Hazardous Area (ATEX) - EEx de - Petrel 621 Bulkhead
Zone 1 Lighting, Hazardous Area (ATEX) - Ex de
Petrel 621 Bulkhead Light Zone 1
Petrel hazardous area (ATEX certified) Zone 1 bulkheads lighting are extensively specified for Ex de lighting applications - Petrel 621 bulkhead lighting features shallow profile for confined space lighting, IIC gas group as standard and integral Ex e terminal chamber. ATEX hazardous area bulkhead lighting options include extended lamp ranges and coloured glass ranges for Zone 1 installation.
Petrel Hazardous Area Zone 1 Lighting (ATEX) - Ex de
Petrel 621 Bulk Head
Heavy duty versatile bulkhead for Zone 1 hazardous area lighting can be supplied with a range of light sources from GLS to SON. Power wattages up to 200w may be installed in the hazardous area equipment. Petrel 621 bulkhead lighting is suitable for Zone 1 gas and dust environments - this ATEX bulkhead light features an integral terminal chamber, external earthing and fixed or pivot mounting brackets. Coloured glass versions of the hazardous area bulkhead light can be supplied with optional external reflectors - SIRA certified.
Hazardous area Zone 1 bulkhead lighting fitting lamp options : 50w or 70w SON, 50w, 80w or 125w HPMV/MBF, up to 200W GLS.
Hazardous Area, Zone 1 Certification : EEx de II 2 GD IIC T3 – T6
Dry Coolers - liquid coolers by Thermokey
The combination of three factors such geometry configuration, optimized pipe diameters and special high efficiency fins, allows to improve the following features:
§ maximum capacity in relation to the heat exchanger size;
§ optimized pressure drops of the primary fluid thanks to the use of different tube diameters and achievable circuits; § possibility to select the optimal unit thanks to the use of different modules.
Stahl T-LUX 6035 Tubular Light Fittings - ATEX Zone 1 Zone 2 Hazardous Area
Stahl T-LUX 6035 Tubular Light Fittings - ATEX Zone 1 Zone 2 Hazardous AreaThorne & Derrick International
The document describes the T-LUX 6035 series of tubular light fittings for fluorescent lamps. The fittings are designed for use in hazardous environments and come in pendant, wall, or bulkhead mounting options. They can hold 1 or 2 lamps of 18, 36, or 58 watts and have an aluminum enclosure and borosilicate glass tube. The fittings are approved for use in explosive gas and dust zones and have an IP68 degree of protection. Accessories like lamps, mounting brackets, and protective wire grids are also described.Stahl 6121 Floodlight - ATEX Zone 1 Zone 2 Hazardous Area Lighting
This document provides information on explosion-protected floodlight models in the Series 6121. It includes specifications for sizes 2 and 3 IIC models and size 2 IIB models. The lights can be used with various halogen, metal halide, and sodium vapor lamps up to 1000W. They have an aluminum housing, adjustable mounting, and IP66/67 protection. Operating temperatures range from -20°C to +40°C or +55°C. Accessories like lamps and spare parts are also detailed.
Stahl 6121 Floodlight - ATEX Zone 1 Zone 2 Hazardous Area Lighting
This document provides information on explosion-protected floodlight models in the Series 6121. It includes details on lamp options, materials, temperature ratings, and ordering codes for models of different sizes that are suitable for Zone 0, 1, 2, 20, 21, 22 hazardous areas. Technical specifications are provided on electrical characteristics, lighting performance, operating conditions, construction, installation, and accessories. Dimensional drawings with measurements are included.
Stahl 6121 Floodlight - ATEX Zone 1 Zone 2 Hazardous Area Lighting
This document provides information on explosion-protected floodlight models in the Series 6121. It includes specifications for sizes 2 and 3 IIC models and size 2 IIB models. The lights can be used with various halogen, metal halide, and sodium vapor lamps up to 1000W. They have an aluminum housing, adjustable mounting, and IP66/67 protection. Operating temperatures range from -20°C to +40°C or +55°C. Accessories like lamps and spare parts are also detailed.
Burkert 6013 - 2/2 Solenoid Valve > นิวเมติก.com
ตัวแทนจำหน่าย Burkert 6013 และ Burkert 6013A
ติดต่อ บริษัท นิวเมติก ดอทคอม (ประเทศไทย) จำกัด
www.นิวเมติก.com
Presentation on Power transformer
This presentation provides an overview of power transformers. It discusses that power transformers are static machines that transform power from one circuit to another without changing frequency, and are used between generators and distribution circuits. It then describes the typical power ratings of small, medium, and large power transformers. The main components of power transformers are then outlined, including bushings, the core and winding, conservator tank, breather and silica gel, cooling tubes, tap changer, transformer oil, and Buchholz relay. The functions of these key components are explained at a high level.
Electric aplience
This document provides information about heaters and electric irons. It describes the parts and operation of exposed element heaters, including the coiled heating element, porcelain plate, and thermostat. It also discusses automatic and steam irons, detailing their components like the sole plate, heating element, and water tank. Maintenance tips are provided, such as using distilled water and cleaning mineral deposits from steam irons. The document concludes with explanations of bi-metal and adjustable thermostat switches.
Final catalogue
This document provides a catalogue of building service products for an electrical supply, water supply, sanitary and sewerage, and storm water drainage system. It includes 14 items for the electrical supply system such as switches, lights, fans, and sockets. 16 items are listed for the water supply system covering tanks, pipes, valves, taps, and basins. 4 items are covered for the sanitary and sewerage section including floor traps, drains, and vent cowls. Finally, 4 products are specified for the storm water drainage including gutters, pipes, and underground drainage. References are provided for each system.
STEAM BOILERS-CALDERAS.pdf
This document discusses steam boilers and boiler water treatment. It covers various types of boilers including fire tube boilers, water tube boilers, and once-through coil generators. It describes common problem areas in boilers like scale, corrosion, deposition, carryover. It also discusses principles of boiler water treatment like scale control, corrosion control, and suspended solids control. Treatment methods include both external methods applied outside the boiler like ion exchange and internal methods applied inside the boiler.
Similar to Solarizer elite data sheet (20)
Zone 1 Lighting, Hazardous Area (ATEX) - Ex de - Petrel 620 Well Glass
Zone 1 Lighting, Hazardous Area (ATEX) - Ex de - Petrel 620 Well Glass
Zone 1 Lighting, Hazardous Area (ATEX) - EEx de - Petrel 621 Bulkhead
Zone 1 Lighting, Hazardous Area (ATEX) - EEx de - Petrel 621 Bulkhead
Stahl T-LUX 6035 Tubular Light Fittings - ATEX Zone 1 Zone 2 Hazardous Area
Stahl T-LUX 6035 Tubular Light Fittings - ATEX Zone 1 Zone 2 Hazardous Area
Stahl 6121 Floodlight - ATEX Zone 1 Zone 2 Hazardous Area Lighting
Stahl 6121 Floodlight - ATEX Zone 1 Zone 2 Hazardous Area Lighting
Stahl 6121 Floodlight - ATEX Zone 1 Zone 2 Hazardous Area Lighting
Stahl 6121 Floodlight - ATEX Zone 1 Zone 2 Hazardous Area Lighting
Stahl 6121 Floodlight - ATEX Zone 1 Zone 2 Hazardous Area Lighting
Stahl 6121 Floodlight - ATEX Zone 1 Zone 2 Hazardous Area Lighting
More from Emmvee India
Corporate brochure
This corporate brochure entails all the details of what Emmvee has established in its years of research on solar energy and bringing out solar energy products to the world. The brochure explores the various challenges that came on the way and how Emmvee used those challenged as opportunities and used them to its advantage. The brochure explores various cutting-edge products from Emmvee that have created a niche for themselves in the solar product market. The Brochure also highlights various projects Emmvee has undertaken to provide a sustainable solar energy model that can benefit millions of people and make a difference in their lives.
Reports q12017 mercom_indiasolarmarketupdateq12017execsumm
The “Executive Summary India Solar Market Update” report reveals the statistics of the rise of solar prowess in India. It highlights major area such as the rise in demand for Solar Power in India in certain years. The report also highlights the installation statistics of various solar plants that have grown in years. A comparative study of solar installation across the states in India has been showcased using various data displaying parameters. The Report also highlights the growth of Photovoltaic modules production as the demand for quality solar water heaters is on the rise. The report is enclosed with a deep analysis of the solar market and its projected production capabilities.
Solaizer anywhere data sheet
Solarizer Anywhere is a special Solar Water Heater system that takes care of your space constraints with a flexible design. The Solar Water Heater uses a small photovoltaic module to power a pump that circulates the heat exchange medium between the solar collector and storage tank. The tank of this system is mounted below the solar collector and therefore the system is very compact. The floor area occupied by the system is also very small compared to the conventional solar water heating system.
Solarizer Heat Pump Water Heater:
Emmvee’s heat pump-based Solar Water Heater is a necessity in all modern residences and buildings equipped with modern jet shower, rain shower, jacuzzi etc. The heat pump based Solar Water Heater has an advantage of providing bulk hot water at the desired temperature as and when required.
Heat Pump Water Heater is a new generation solar water heater that is sure to have a long-lasting impression on you thanks to its modern features and reliability over its lifetime. The Impressive Coefficient of Performance from this solar water heater sets it apart from the rest of the products.
Solarizer Anywhere:
Solarizer Anywhere is a special Solar Water Heater system that takes care of your space constraints with a flexible design. The Solar Water Heater uses a small photovoltaic module to power a pump that circulates the heat exchange medium between the solar collector and storage tank. The tank of this system is mounted below the solar collector and therefore the system is very compact. The floor area occupied by the system is also very small compared to the conventional solar water heating system.
Solarizer Anywhere can fit in “Anywhere” yet provides unmatched and quality water heating that you would not get “Anywhere.
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
60 Monocrystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
5. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Mono Crystalline Cell Modules:
The Monocrystalline modules can be used where discrete but powerful performance is required. The modules are designed in accordance with the specific need for a particular solar product out there. Some of its salient features are listed below:
1. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
2. Excellent operating temperature range.
3. Optimum yield even in fluctuating voltages and current.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
6. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
60 Multi-crystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
Emmvee Crystal Off-grid Module:
Emmvee Crystal’s off-grid modules are beneficial in grid systems where power fluctuations are prevalent. Off-grid modules provide power as a backup when no active supply of power is possible. Some of the salient features of the off-grid modules are:
1. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
2. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
3. Excellent operating temperature range.
4. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
5. Optimized normal operating cell temperature so that there is no hindrance in an optimized throughput from the product.
60 Monocrystalline Cell Modules:
The 60 cell monocrystalline modules are well suited for those solar products that require optimum power efficiency but with less amount of cells. The Monocrystalline module is specifically designed to match the performance needs of a certain solar application.
Some of its features can be seen as follows:
1. The low weight of just 18 kgs makes it an ergonomic module to use.
2. A 3.2 mm high transmission tempered glass that takes the overall performance of this module to a new high.
3. Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
4. Excellent operating temperature range.
5. Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment
72 Multi Crystalline Cell Modules:
The multi-crystalline modules from Emmvee are suited for those solar products that are prone to temperature fluctuations. The modules pack some good functionalities, the following are few of them:
Effective tackling of weather conditions such as a strong hail with resistance to speed up to 83 km/h so that your device is not damaged.
Good operating temperature range.
Optimum yield even in fluctuating voltages and current.
The material used in the construction can sustain adverse conditions like excessive sun exposure, heavy rainfall etc.
Class II protection so that the user gets at least two layers of insulation from unintended damage to the equipment.
More from Emmvee India (10)
Reports q12017 mercom_indiasolarmarketupdateq12017execsumm
Reports q12017 mercom_indiasolarmarketupdateq12017execsumm
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
60 Monocrystalline Cell Modules and 72 Mono Crystalline Cell Modules:
72 Cell Modules and 60 cell modules (multi-crystalline)
72 Cell Modules and 60 cell modules (multi-crystalline)
Recently uploaded
Mastering Email Campaign Automation Strategies and Best Practices - Michelle...
Mastering Email Campaign Automation Strategies and Best Practices - Michelle...DigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
Digital Marketing Trends - Experts Insights on How to Gain a Competitive Edge...
Digital Marketing Trends - Experts Insights on How to Gain a Competitive Edge...DigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
The digital marketing industry is changing faster than ever and those who don’t adapt with the times are losing market share. Where should marketers be focusing their efforts? What strategies are the experts seeing get the best results? Get up-to-speed with the latest industry insights, trends and predictions for the future in this panel discussion with some leading digital marketing experts.No Cookies, No Problem - Steve Krull, Be Found Online
No Cookies, No Problem - Steve Krull, Be Found OnlineDigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
In the face of the news of Google beginning to remove cookies from Chrome (30m users at the time of writing), there’s no longer time for marketers to throw their hands up and say “I didn’t know” or “They won’t go through with it”. Reality check - it has already begun - the time to take action is now. The good news is that there are solutions available and ready for adoption… but for many the race to catch up to the modern internet risks being a messy, confusing scramble to get back to "normal"Mastering Your Online Visibility - Fernando Angulo
Mastering Your Online Visibility - Fernando AnguloDigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
Unlock the secrets to enhancing your digital presence with our masterclass on mastering online visibility. Learn actionable strategies to boost your brand, optimize your social media, and leverage SEO. Transform your online footprint into a powerful tool for growth and engagement.
Key Takeaways:
1. Effective techniques to increase your brand's visibility across various online platforms.
2. Strategies for optimizing social media profiles and content to maximize reach and engagement.
3. Insights into leveraging SEO best practices to improve search engine rankings and drive organic traffic.Story Telling Master Class - Jennifer Morilla
Story Telling Master Class - Jennifer MorillaDigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
The Strategic Impact of Storytelling in the Age of AI
In the grand tapestry of marketing, where algorithms analyze data and artificial intelligence predicts trends, one essential thread remains constant — the timeless art of storytelling. As we stand on the precipice of a new era driven by AI, join me in unraveling the narrative alchemy that transforms brands from mere entities into captivating tales that resonate across the digital landscape. In this exploration, we will discover how, in the face of advancing technology, the human touch of a well-crafted story becomes not just a marketing tool but the very essence that breathes life into brands and forges lasting connections with our audience.Growth Marketing in 2024 - Randy Rayess, Outgrow
Growth Marketing in 2024 - Randy Rayess, OutgrowDigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
Build marketing products across the customer journey to grow your business and build a relationship with your customer. For example you can build graders, calculators, quizzes, recommendations, chatbots or AR apps. Things like Hubspot's free marketing grader, Moz's site analyzer, VenturePact's mobile app cost calculator, new york times's dialect quiz, Ikea's AR app, L'Oreal's AR app and Nike's fitness apps. All of these examples are free tools that help drive engagement with your brand, build an audience and generate leads for your core business by adding value to a customer during a micro-moment.
Key Takeaways:
Learn how to use specific GPTs to help you Learn how to build your own marketing tools
Generate marketing ideas for your business How to think through and use AI in marketing
How AI changes the marketing gamePickUp_conversational AI_Capex, Inc._20240611
PickUp, Improve conversions with scenario-based conversational AI.
Etsy Marketing Guide - Tips For Selling Digital Products
This guide is for those who are selling digital products on Etsy platform.
Pillar-Based Marketing - Ryan Brock, DemandJump
Pillar-Based Marketing - Ryan Brock, DemandJumpDigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
In this humorous and data-heavy session, join us in a joyous celebration of life honoring the long list of SEO tactics and concepts we lost this year. Remember fondly the beautiful time you shared with defunct ideas like link building, keyword cannibalization, search volume as a value indicator, and even our most cherished of friends: the funnel. Make peace with their loss as you embrace a new paradigm for organic content: Pillar-Based Marketing. Along the way, discover that the results that old SEO and all its trappings brought you weren’t really very good at all, actually.
In this respectful and life-affirming service—erm, session—join Ryan Brock (Chief Solution Officer at DemandJump and author of Pillar-Based Marketing: A Data-Driven Methodology for SEO and Content that Actually Works) and leave with:
• Clear and compelling evidence that most legacy SEO metrics and tactics have slim to no impact on SEO outcomes
• A major mindset shift that eliminates most of the metrics and tactics associated with SEO in favor of a single metric that defines and drives organic ranking success
• Practical, step-by-step methodology for choosing SEO pillar topics and publishing content quickly that ranks fastUnleash the Power of Storytelling - Win Hearts, Change Minds, Get Results - R...
Unleash the Power of Storytelling - Win Hearts, Change Minds, Get Results - R...DigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
Lily Ray - Optimize the Forest, Not the Trees: Move Beyond SEO Checklist - Mo...
Lily Ray, Vice President of SEO Strategy & Research at Amsive, explores optimizing strategies for sustainable growth and explores the impact of AI on the SEO landscape.
Data-Driven Personalization - Build a Competitive Advantage by Knowing Your C...
Data-Driven Personalization - Build a Competitive Advantage by Knowing Your C...DigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
Data-Driven Personalization: Build a Competitive Advantage by Knowing Your Customers Better Than Your CompetitionPillar-Based Marketing Master Class - Ryan Brock
Pillar-Based Marketing Master Class - Ryan BrockDigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
In this humorous and data-heavy Master Class, join us in a joyous celebration of life honoring the long list of SEO tactics and concepts we lost this year. Remember fondly the beautiful time you shared with defunct ideas like link building, keyword cannibalization, search volume as a value indicator, and even our most cherished of friends: the funnel. Make peace with their loss as you embrace a new paradigm for organic content: Pillar-Based Marketing. Along the way, discover that the results that old SEO and all its trappings brought you weren’t really very good at all, actually.
In this respectful and life-affirming service—erm, session—join Ryan Brock (Chief Solution Officer at DemandJump and author of Pillar-Based Marketing: A Data-Driven Methodology for SEO and Content that Actually Works) and leave with:
• Clear and compelling evidence that most legacy SEO metrics and tactics have slim to no impact on SEO outcomes
• A major mindset shift that eliminates most of the metrics and tactics associated with SEO in favor of a single metric that defines and drives organic ranking success
• Practical, step-by-step methodology for choosing SEO pillar topics and publishing content quickly that ranks fastMastering SEO for Google in the AI Era - Dennis Yu
Mastering SEO for Google in the AI Era - Dennis YuDigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
Mastering Local SEO for Service Businesses in the AI Era"" is tailored specifically for local service providers like plumbers, dentists, and others seeking to dominate their local search landscape. This session delves into leveraging AI advancements to enhance your online visibility and search rankings through the Content Factory model, designed for creating high-impact, SEO-driven content. Discover the Dollar-a-Day advertising strategy, a cost-effective approach to boost your local SEO efforts and attract more customers with minimal investment. Gain practical insights on optimizing your online presence to meet the specific needs of local service seekers, ensuring your business not only appears but stands out in local searches. This concise, action-oriented workshop is your roadmap to navigating the complexities of digital marketing in the AI age, driving more leads, conversions, and ultimately, success for your local service business.
Key Takeaways:
Embrace AI for Local SEO: Learn to harness the power of AI technologies to optimize your website and content for local search. Understand the pivotal role AI plays in analyzing search trends and consumer behavior, enabling you to tailor your SEO strategies to meet the specific demands of your target local audience. Leverage the Content Factory Model: Discover the step-by-step process of creating SEO-optimized content at scale. This approach ensures a steady stream of high-quality content that engages local customers and boosts your search rankings. Get an action guide on implementing this model, complete with templates and scheduling strategies to maintain a consistent online presence. Maximize ROI with Dollar-a-Day Advertising: Dive into the cost-effective Dollar-a-Day advertising strategy that amplifies your visibility in local searches without breaking the bank. Learn how to strategically allocate your budget across platforms to target potential local customers effectively. The session includes an action guide on setting up, monitoring, and optimizing your ad campaigns to ensure maximum impact with minimal investment.Luxury Hanloom Saree Brand ,Capstone Project_Kiran Bansal.pdf
Capstone Project: Luxury Handloom Saree Brand
As part of my college project, I applied my learning in brand strategy to create a comprehensive project for a luxury handloom saree brand. Key aspects of this project included:
- *Competitor Analysis:* Conducted in-depth competitor analysis to identify market position and differentiation opportunities.
- *Target Audience:* Defined and segmented the target audience to tailor brand messages effectively.
- *Brand Strategy:* Developed a detailed brand strategy to enhance market presence and appeal.
- *Brand Perception:* Analyzed and shaped the brand perception to align with luxury and heritage values.
- *Brand Ladder:* Created a brand ladder to outline the brand's core values, benefits, and attributes.
- *Brand Architecture:* Established a cohesive brand architecture to ensure consistency across all brand touchpoints.
This project helped me gain practical experience in brand strategy, from research and analysis to strategic planning and implementation.
Podcast, The New Marketing Currency - Ozeal Debastos
Podcast, The New Marketing Currency - Ozeal DebastosDigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
Journey of amplification and buzz creation through podcast marketing, appealing to brands and marketers looking to expand their reach.Mastering The Best Restaurant Advertising Campaigns Detailed Guide
A guide for making the Best Restaurant Advertising Campaigns with demographics, data analytics, and digital advertising for measurable results.
Consumer Journey Mapping & Personalization Master Class - Sabrina Killgo
Consumer Journey Mapping & Personalization Master Class - Sabrina KillgoDigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
The Secret to Engaging Modern Consumers: Journey Mapping and Personalization
In today's digital landscape, understanding the customer's journey and delivering personalized experiences are paramount. This masterclass delves into the art of consumer journey mapping, a powerful technique that visualizes the entire customer experience across touchpoints. Attendees will learn how to create detailed journey maps, identify pain points, and uncover opportunities for optimization. The presentation also explores personalization strategies that leverage data and technology to tailor content, products, and experiences to individual customers. From real-time personalization to predictive analytics, attendees will gain insights into cutting-edge approaches that drive engagement and loyalty.
Key Takeaways:
Current consumer landscape; Steps to mapping an effective consumer journey; Understanding the value of personalization; Integrating mapping and personalization for success; Brands that are getting It right!; Best Practices; Future TrendsGrow Your Business Online: Introduction to Digital Marketing
In today's digital world, customers are just a click away. "Grow Your Business Online: Introduction to Digital Marketing" dives into the exciting world of digital marketing, equipping you with the tools and strategies to reach new audiences, expand your reach, and ultimately grow your business.
website = https://digitaldiscovery.institute/
address = C 210 A Industrial Area, Phase 8B, Sahibzada Ajit Singh Nagar, Punjab 140308
Unlocking Everyday Narratives: The Power of Storytelling in Marketing - Chad...
Unlocking Everyday Narratives: The Power of Storytelling in Marketing - Chad...DigiMarCon - Digital Marketing, Media and Advertising Conferences & Exhibitions
Everyone knows the power of stories, but when asked to come up with them, we struggle. Either we second guess ourselves as to the story's relevance, or we just come up blank and can't think of any. Unlocking Everyday Narratives: The Power of Storytelling in Marketing will teach you how to recognize stories in the moment and to recall forgotten moments that your audience needs to hear.
Key Takeaways:
Understand Why Personal Stories Connect Better
How To Remember Forgotten Stories
How To Use Customer Experiences As Stories For Your BrandRecently uploaded (20)
Mastering Email Campaign Automation Strategies and Best Practices - Michelle...
Mastering Email Campaign Automation Strategies and Best Practices - Michelle...
Digital Marketing Trends - Experts Insights on How to Gain a Competitive Edge...
Digital Marketing Trends - Experts Insights on How to Gain a Competitive Edge...
No Cookies, No Problem - Steve Krull, Be Found Online
No Cookies, No Problem - Steve Krull, Be Found Online
Mastering Your Online Visibility - Fernando Angulo
Mastering Your Online Visibility - Fernando Angulo
Etsy Marketing Guide - Tips For Selling Digital Products
Etsy Marketing Guide - Tips For Selling Digital Products
Unleash the Power of Storytelling - Win Hearts, Change Minds, Get Results - R...
Unleash the Power of Storytelling - Win Hearts, Change Minds, Get Results - R...
Lily Ray - Optimize the Forest, Not the Trees: Move Beyond SEO Checklist - Mo...
Lily Ray - Optimize the Forest, Not the Trees: Move Beyond SEO Checklist - Mo...
Data-Driven Personalization - Build a Competitive Advantage by Knowing Your C...
Data-Driven Personalization - Build a Competitive Advantage by Knowing Your C...
Mastering SEO for Google in the AI Era - Dennis Yu
Mastering SEO for Google in the AI Era - Dennis Yu
Luxury Hanloom Saree Brand ,Capstone Project_Kiran Bansal.pdf
Luxury Hanloom Saree Brand ,Capstone Project_Kiran Bansal.pdf
Podcast, The New Marketing Currency - Ozeal Debastos
Podcast, The New Marketing Currency - Ozeal Debastos
Mastering The Best Restaurant Advertising Campaigns Detailed Guide
Mastering The Best Restaurant Advertising Campaigns Detailed Guide
Consumer Journey Mapping & Personalization Master Class - Sabrina Killgo
Consumer Journey Mapping & Personalization Master Class - Sabrina Killgo
Grow Your Business Online: Introduction to Digital Marketing
Grow Your Business Online: Introduction to Digital Marketing
Unlocking Everyday Narratives: The Power of Storytelling in Marketing - Chad...
Unlocking Everyday Narratives: The Power of Storytelling in Marketing - Chad...
Solarizer elite data sheet
- 1. PRODUCT SPECIFICATIONS HOT WATER STORAGE TANK SPECIFICATIONS Model T15 T20 T30 Storage tank Double jacket water heater made of enameled steel for horizontal instal - lation Weight (empty); in kg 62 77 115 Corrosion protection Magnesium anode Insulation 50 mm polyurethane insulation, CFC free Connection for electrical resistance 1 1/4” ISO 228 Storage tank color RAL7035 Inner coating tank material Glass Enamel Optional electrical power (kW) 2 kW single phase 230 V AC with earth Expansion tank configuration Integrated with storage tank Safety valve Safety group 6 bar (secondary circuit) Pressure relief valve 3 bar (primary circuit) Air release valve Heat transfer medium Glycol water mixture Maximum working pressure 6 bar COLLECTOR SPECIFICATIONS Type of collector Flat plate collector Weight (empty), Kg (collector) 45 45 90 Total Area (m 2 )* 21 21 42 Absorber type Aluminium full plate and Copper pipes Absorber coating High selective coating. Absorptivity: 0.95 ± 0.02 Emmisivity: 0.5 ± 0.02 Glazing High transmission low iron solar glass Maximum working pressure 10 bar Collector frame Extruded aluminium frame Riser tubes configuration Harp construction Riser tubes Copper End connection Brass compression fittings Luxury homes deserves it * Collector Area Features • Magnesium alloy sacrificial anode • Universal mounting structure • Withstands 6 bar pressure • 100% hygienic water (No rubber/steel/any toxic material in contact with water) • Ability to withstand wind speed of 150 kmph • Unique heat exchanger design • Highly efficient absorbers • Safety valve for over-pressure protection • Safety valve for over-temperature protection and anti-vacuum valve** • Rugged and sturdy design • CE marked electrical thermostat • No freezing in sub-zero temperatures • Stylish design to suit your requirement Pressure release valve Drain portSafety valve Brass ferrule nut EMMVEE Solar Systems Private Limted Address : # 13/1, International Airport Road, Bettahalasur Post, Bengaluru - 562 157, India Tel : +91 80 4323 3333 Email : info@emmvee.in Website : www.emmvee.com