Jiangsu Sunhome New Energy Co., Ltd. is a leading Chinese manufacturer of solar energy products since 1998. They produce high-quality solar water heaters and collectors for domestic and commercial use. Their products meet European and other international standards and have been exported to over 76 countries worldwide. Sunhome specializes in heat pipe solar collectors and flat plate collectors in various sizes to suit different applications.
This document is a product catalogue from Fermit GmbH for sanitary equipment thread seals. It describes several thread sealing products including Neo Fermit Universal, a solvent-free thread sealant suitable for drinking water and gas connections from 0-95°C and 0-130°C respectively. It also lists hemp thread sealing material and specialized sealants like Fermit-Spezial for service water up to 100°C, Hochdruck-Fermit for pressures up to 16 bar and 160°C, and Fermitol liquid sealant resistant to fuels, water and chemicals from -10-130°C. Details on properties, applications, and part numbers are provided for each product.
pneumatic air fittings are used to connect air hose, they have a lot of types and size. Such as plastic push in fittings, brass push in fittings, stainless steel push in fittings, rapid screw fittings, compression fitting, etc
This document lists various materials that a company called First Converting provides as a one-stop solution for converting needs, including VHB 3M tapes, reflection sheets, teflon tape, silicone rubber, single coated tapes from 3M, Avery, and Scapa, die cut thermal tapes, insulation materials, die cut rubber, foam, cork, metal, textile, EMI gasket, and conductive foam.
This document provides information about Togen Building Products Co., Ltd. and their terracotta facade products. It discusses the company's history and facilities, highlighting their large production capacity and advanced technology. It then showcases their various terracotta panel products, including flat panels, louvers, tiles, and special shaped panels. Product specifications, installation diagrams, and performance advantages are summarized.
This document provides product information for MOLYKOTE® FS 3452 Fluoro-Silicone Grease. It has a wide service temperature range from -30°C to +230°C and is resistant to water, solvents, and chemicals. It can be used for lubricating and sealing metal, plastic, and elastomer components experiencing slow movements and heavy loads. Typical applications include valves, seals, pumps, bearings, and loading arms. The grease has high oxidation resistance, low evaporation, and maintains its lubricating properties over long periods of time.
The document provides details on the construction and installation of insulation panels for a freezer, including 9 numbered details. It specifies materials like M8 stainless steel hook bolts, 0.8mm thick metal flashing, and polystyrene and EPS insulation panels. Fixing details are given for wall corners, wall joints, floors, doors, and roof supports.
This document provides product information for MOLYKOTE® 165 LT gearwheel grease. It is an extreme pressure gearwheel grease for highly stressed open gears with a peripheral speed up to 2.5 m/s. The grease has a high load-carrying capacity and protects against wear and corrosion while reducing existing pitting. It is suitable for open gears subjected to high stresses and weather effects, as well as transmission gears. The grease has a black color, density of 0.96 g/ml, and drop point of 175°C. It provides good lubrication at temperatures from -25°C to +120°C.
This document is a product catalogue from Fermit GmbH for sanitary equipment thread seals. It describes several thread sealing products including Neo Fermit Universal, a solvent-free thread sealant suitable for drinking water and gas connections from 0-95°C and 0-130°C respectively. It also lists hemp thread sealing material and specialized sealants like Fermit-Spezial for service water up to 100°C, Hochdruck-Fermit for pressures up to 16 bar and 160°C, and Fermitol liquid sealant resistant to fuels, water and chemicals from -10-130°C. Details on properties, applications, and part numbers are provided for each product.
pneumatic air fittings are used to connect air hose, they have a lot of types and size. Such as plastic push in fittings, brass push in fittings, stainless steel push in fittings, rapid screw fittings, compression fitting, etc
This document lists various materials that a company called First Converting provides as a one-stop solution for converting needs, including VHB 3M tapes, reflection sheets, teflon tape, silicone rubber, single coated tapes from 3M, Avery, and Scapa, die cut thermal tapes, insulation materials, die cut rubber, foam, cork, metal, textile, EMI gasket, and conductive foam.
This document provides information about Togen Building Products Co., Ltd. and their terracotta facade products. It discusses the company's history and facilities, highlighting their large production capacity and advanced technology. It then showcases their various terracotta panel products, including flat panels, louvers, tiles, and special shaped panels. Product specifications, installation diagrams, and performance advantages are summarized.
This document provides product information for MOLYKOTE® FS 3452 Fluoro-Silicone Grease. It has a wide service temperature range from -30°C to +230°C and is resistant to water, solvents, and chemicals. It can be used for lubricating and sealing metal, plastic, and elastomer components experiencing slow movements and heavy loads. Typical applications include valves, seals, pumps, bearings, and loading arms. The grease has high oxidation resistance, low evaporation, and maintains its lubricating properties over long periods of time.
The document provides details on the construction and installation of insulation panels for a freezer, including 9 numbered details. It specifies materials like M8 stainless steel hook bolts, 0.8mm thick metal flashing, and polystyrene and EPS insulation panels. Fixing details are given for wall corners, wall joints, floors, doors, and roof supports.
This document provides product information for MOLYKOTE® 165 LT gearwheel grease. It is an extreme pressure gearwheel grease for highly stressed open gears with a peripheral speed up to 2.5 m/s. The grease has a high load-carrying capacity and protects against wear and corrosion while reducing existing pitting. It is suitable for open gears subjected to high stresses and weather effects, as well as transmission gears. The grease has a black color, density of 0.96 g/ml, and drop point of 175°C. It provides good lubrication at temperatures from -25°C to +120°C.
This document contains plans and specifications for insulation installation at a new freezer store. It includes details of new freezer pods and blast freezers being added, with dimensions and specifications for insulation panels of various thicknesses. Reference drawings are provided for insulation installation details, structural elements, and refrigeration layout. The plan provides specifications for insulating walls, floors, ceilings and openings of the new and existing structures to the required standards for the freezer environment.
This document outlines the components and options available for United Metal Products' air handling units. It discusses the materials, gauges, and coatings used for base frames, casings, doors, louvers, dampers, coils, fans, and other components. It also summarizes the company's commitment to fair dealings, cutting-edge technology, and high-quality engineering and manufacturing.
1) The best way to clean a screw and barrel is to remove the screw from the machine and clean it outside using brass tools and stearic acid rather than applying direct heat, which can damage the metal.
2) To purge the system, use HDPE plastic at 200C while slowly rotating the screw until the extrudate fully changes from the processing resin to HDPE.
3) Clean the screw using brass tools and stearic acid while exposing sections, then clean the barrel bore using a wire brush coated in copper gauze and stearic acid.
Hunan Kingcera Engineering Co.,Ltd is an manufacturer of Al2O3 alumina ceramic wear resistant material, like ZTA ceramic liner, ceramic lined elbow, ceramic lined sleeve, ceramic lined chute, ceramic lined hopper. We provide the service for 4 main minings in Australia, such as FMG, Roy Hill, Rio Tinto, BHP.
Please contact us via info@kingcera.com to get more details.
The document advertises powder coating kits from HotCoat including the Original HotCoat System for $99.99, the Original HotCoat Gun Deluxe Kit for $139.99 (originally $184.95), and the Original HotCoat Gun Elite Kit for $189.99 (originally $255.90). The kits include a HotCoat gun, powder, accessories, and instructions for easy powder coating of parts using only an air compressor and electric oven. HotCoat powder coating provides a professional finish at a fraction of the cost of a powder coating shop.
This document provides product information for two high performance greases - MOLYKOTE® PG 30 L and MOLYKOTE® EM 30 LG. The greases contain no lead or nickel and have a high load carrying capacity, making them suitable for lubricating plastic, plastic, plastic/metal, and rubber/metal combinations with medium to heavy loads and low to medium speeds. The document lists typical properties such as consistency, density, service temperature range, and test results for properties like oxidation resistance, corrosion protection, and oil separation. Usage instructions and limitations, packaging, storage, and warranty information are also provided.
cementing plugs have reinforced locking teeth built into the plugs.
>>The cementing plugs lock together between the top plug and the bottom plug to eliminate rotation of the plug during drill out.
36W /40W /48W /60W, 120-130lm/w.
Ballast bypass or ballast compatiable is available.
LED tube mostly use in Supermarket, School, facory etc...
We have fully testing equipment and well trained QC stafff to make sure in high quality. You can also check more details on www.zohnson-led.com.
Refractories and its types www.chemicallibrary.blogspot.comFARRUKH SHEHZAD
This document discusses refractory materials, which are non-metallic materials that retain their strength and do not fuse at high temperatures. Refractories can be classified based on their chemical composition, manufacturing method, and refractoriness. Common refractory materials include fire clay, silica, chromite, magnesia, and alumina. Key properties of refractories include porosity, refractoriness, strength, thermal conductivity, spalling resistance, and slag and abrasion resistance. Refractories are selected based on their application, operating temperatures, and stress conditions. Common applications include furnaces, boilers, and the cement industry.
This document provides specifications for a 3-piece ball valve with sizes ranging from DN15 to DN100. The valve features a unique design with patented components that reduce leakage and wear. It has a floating ball, soft or metal seats, fire-safe capabilities, and can be used as a control or shut-off valve for liquids that do not damage the materials. Pressure and temperature ratings are provided for various valve body materials up to Class 900. Dimension tables are included for butt weld, threaded, and flanged end connections.
This document provides test results for three types of enameled aluminum wire with diameters of 2.40mm, 4.6mm, and 6.0mm. The test results show that each wire meets or exceeds the technical requirements for appearance, diameter, insulation thickness, resistance, elongation, winding and tensile tests, and resistance to heat, solvents, and high voltages. All quality control tests also yielded acceptable results.
Bolsas filtrantes para filtros de mangas de Zukun FiltrationVivian Lu
Zukun Filtration tiene pulso jet mangas filtrantes diseñado a las más altas especificaciones OEM.
Tenemos Mangas Filtrantes Para diferentes industrias, hay mangas filtrantes para mezcla de asfalto, mangas filtrantes para planta de energía, mangas filtrantes para caldera, mangas filtrantes para planta de cemento, y mangas filtrantes utilizadas en otras diferentes industrias.
No dude en dejarnos saber sus necesidades.
This document provides product information about MOLYKOTE BG 555 Low Noise Grease. It has a wide service temperature range from -40 to 150°C, long performance life, excellent low temperature properties, and noise suppressing and anti-rust properties. Typical properties testing shows it has a high dropping point, good corrosion prevention, and can last over 4000 hours in life performance testing at 125°C. It is suitable for use in bearings at elevated temperatures and helps extend intervals between grease replacement.
There are three main types of refractories based on their chemical nature: acidic, basic, and neutral. Refractories can also be classified based on their fusion temperature into normal, high, and super refractories. Manufacturing methods include dry press, fused cast, hand molded, and formed/unformed. Formed refractories include plastic, ramming masses, castables, mortars, and dry vibrating cements. Common refractories include fireclay, silica, magnesite, mullite, chrome-magnesite, carbide, and insulating refractories which are used as heat barriers. Each refractory has specific properties and applications depending on their chemical composition and temperature resistance.
Ref failur e analysis tip casting & retainer area fpradeepdeepi
This document summarizes refractory failures at various locations in different kilns. It describes the causes of failures such as uncontrolled steam pressure during heating, inadequate expansion joints, aggressive clinker liquid attack, and lack of proper nose ring cooling. Remedies provided include modifying tip casting designs, increasing expansion gaps, improving nose ring airflow, controlling chemistry variations, and switching to higher grade refractories. Common failure locations addressed are the tip casting area, outlet cones, and retainer rings. Analysis of each case identifies specific issues and recommends customized solutions.
With over 100,000 users, and 2 decades of experience, Kondass, is the leader in Solar products, UPS systems and servo stabilizers.
Kondaas products are conceived and developed at world - class R&D center and manufactured at our state -of-the-art plant on completely automated process. Every day, the products, we manufacture, Service and distribute, accelerates and energizes, businesses, Industries, homes, hospitals and schools and elevates the quality of life.
Combining deep local insights, and a relentless commitment to operational excellence and values.
We help our customers to grow through reliable UPS and Solar System. We operate in extremely diverse markets, ranging from a small ups to power one computer or one small hut to large machineries or an entire Hospital. Everywhere we operate, we believe that dependable Power Systems is essential to human progress and to advancing economic growth, public health and security.
Integrative high pressure solar water heater Jussi Han
Haiyan Uniepu Trading Co., Ltd is a subsidiary of Uniepu Electric Co., Ltd that manufactures and sells solar water heaters, solar panels, and other renewable energy products. They have over 500 employees including an in-house R&D team. Their product line includes solar water heaters, LED lighting, and solar panels. They export to several countries and aim to provide renewable energy solutions and quality customer service.
This document discusses material selection considerations for various components of an electromechanical product. It provides information on different plastic and metal materials, including their properties, grades, finishes and suitability for different applications. Specific material selections are recommended for parts like housing, covers, trays, brackets based on factors like required strength, temperature and flame resistance, cost and manufacturability. Gasket and thermal interface materials are also discussed along with their characteristic properties.
A Solar Water Heater that blends fine water heating experience with impeccable efficiency, Solarizer Elite performs off the charts. Solarizer Elite’s unique glass-enameled tank keeps your water clean by preventing corrosion and the build-up of bacteria. This extends the Solar Water Heater's lifespan and performance metrics whilst delivering the features it entails.
Solarizer Elite has been designed to exceed your expectations with respect to water heating. All the design metrics are rigorously engineered to provide you with an “Elite” experience in solar water heating.
This document provides information about Aurum Alloys & Engineering LLP, an ISO 9001:2008 certified company that manufactures and exports stainless steel, carbon steel, nickel alloy, and other industrial pipes and tubes. The company aims to provide quality products at competitive prices within specified timelines. It has production and quality testing facilities and exports a wide range of pipes, tubes, and other fabricated metal products internationally.
Solartec Global | Haier Solar Hot Water SystemsSolartec Global
Solartec Global Limited is proud to distribute Haier Solar Hot Water Systems. Available in 180L and 300L systems. The flat collectors are ideal for tropical climates and reduce the cost of accessing hot water.
This document contains plans and specifications for insulation installation at a new freezer store. It includes details of new freezer pods and blast freezers being added, with dimensions and specifications for insulation panels of various thicknesses. Reference drawings are provided for insulation installation details, structural elements, and refrigeration layout. The plan provides specifications for insulating walls, floors, ceilings and openings of the new and existing structures to the required standards for the freezer environment.
This document outlines the components and options available for United Metal Products' air handling units. It discusses the materials, gauges, and coatings used for base frames, casings, doors, louvers, dampers, coils, fans, and other components. It also summarizes the company's commitment to fair dealings, cutting-edge technology, and high-quality engineering and manufacturing.
1) The best way to clean a screw and barrel is to remove the screw from the machine and clean it outside using brass tools and stearic acid rather than applying direct heat, which can damage the metal.
2) To purge the system, use HDPE plastic at 200C while slowly rotating the screw until the extrudate fully changes from the processing resin to HDPE.
3) Clean the screw using brass tools and stearic acid while exposing sections, then clean the barrel bore using a wire brush coated in copper gauze and stearic acid.
Hunan Kingcera Engineering Co.,Ltd is an manufacturer of Al2O3 alumina ceramic wear resistant material, like ZTA ceramic liner, ceramic lined elbow, ceramic lined sleeve, ceramic lined chute, ceramic lined hopper. We provide the service for 4 main minings in Australia, such as FMG, Roy Hill, Rio Tinto, BHP.
Please contact us via info@kingcera.com to get more details.
The document advertises powder coating kits from HotCoat including the Original HotCoat System for $99.99, the Original HotCoat Gun Deluxe Kit for $139.99 (originally $184.95), and the Original HotCoat Gun Elite Kit for $189.99 (originally $255.90). The kits include a HotCoat gun, powder, accessories, and instructions for easy powder coating of parts using only an air compressor and electric oven. HotCoat powder coating provides a professional finish at a fraction of the cost of a powder coating shop.
This document provides product information for two high performance greases - MOLYKOTE® PG 30 L and MOLYKOTE® EM 30 LG. The greases contain no lead or nickel and have a high load carrying capacity, making them suitable for lubricating plastic, plastic, plastic/metal, and rubber/metal combinations with medium to heavy loads and low to medium speeds. The document lists typical properties such as consistency, density, service temperature range, and test results for properties like oxidation resistance, corrosion protection, and oil separation. Usage instructions and limitations, packaging, storage, and warranty information are also provided.
cementing plugs have reinforced locking teeth built into the plugs.
>>The cementing plugs lock together between the top plug and the bottom plug to eliminate rotation of the plug during drill out.
36W /40W /48W /60W, 120-130lm/w.
Ballast bypass or ballast compatiable is available.
LED tube mostly use in Supermarket, School, facory etc...
We have fully testing equipment and well trained QC stafff to make sure in high quality. You can also check more details on www.zohnson-led.com.
Refractories and its types www.chemicallibrary.blogspot.comFARRUKH SHEHZAD
This document discusses refractory materials, which are non-metallic materials that retain their strength and do not fuse at high temperatures. Refractories can be classified based on their chemical composition, manufacturing method, and refractoriness. Common refractory materials include fire clay, silica, chromite, magnesia, and alumina. Key properties of refractories include porosity, refractoriness, strength, thermal conductivity, spalling resistance, and slag and abrasion resistance. Refractories are selected based on their application, operating temperatures, and stress conditions. Common applications include furnaces, boilers, and the cement industry.
This document provides specifications for a 3-piece ball valve with sizes ranging from DN15 to DN100. The valve features a unique design with patented components that reduce leakage and wear. It has a floating ball, soft or metal seats, fire-safe capabilities, and can be used as a control or shut-off valve for liquids that do not damage the materials. Pressure and temperature ratings are provided for various valve body materials up to Class 900. Dimension tables are included for butt weld, threaded, and flanged end connections.
This document provides test results for three types of enameled aluminum wire with diameters of 2.40mm, 4.6mm, and 6.0mm. The test results show that each wire meets or exceeds the technical requirements for appearance, diameter, insulation thickness, resistance, elongation, winding and tensile tests, and resistance to heat, solvents, and high voltages. All quality control tests also yielded acceptable results.
Bolsas filtrantes para filtros de mangas de Zukun FiltrationVivian Lu
Zukun Filtration tiene pulso jet mangas filtrantes diseñado a las más altas especificaciones OEM.
Tenemos Mangas Filtrantes Para diferentes industrias, hay mangas filtrantes para mezcla de asfalto, mangas filtrantes para planta de energía, mangas filtrantes para caldera, mangas filtrantes para planta de cemento, y mangas filtrantes utilizadas en otras diferentes industrias.
No dude en dejarnos saber sus necesidades.
This document provides product information about MOLYKOTE BG 555 Low Noise Grease. It has a wide service temperature range from -40 to 150°C, long performance life, excellent low temperature properties, and noise suppressing and anti-rust properties. Typical properties testing shows it has a high dropping point, good corrosion prevention, and can last over 4000 hours in life performance testing at 125°C. It is suitable for use in bearings at elevated temperatures and helps extend intervals between grease replacement.
There are three main types of refractories based on their chemical nature: acidic, basic, and neutral. Refractories can also be classified based on their fusion temperature into normal, high, and super refractories. Manufacturing methods include dry press, fused cast, hand molded, and formed/unformed. Formed refractories include plastic, ramming masses, castables, mortars, and dry vibrating cements. Common refractories include fireclay, silica, magnesite, mullite, chrome-magnesite, carbide, and insulating refractories which are used as heat barriers. Each refractory has specific properties and applications depending on their chemical composition and temperature resistance.
Ref failur e analysis tip casting & retainer area fpradeepdeepi
This document summarizes refractory failures at various locations in different kilns. It describes the causes of failures such as uncontrolled steam pressure during heating, inadequate expansion joints, aggressive clinker liquid attack, and lack of proper nose ring cooling. Remedies provided include modifying tip casting designs, increasing expansion gaps, improving nose ring airflow, controlling chemistry variations, and switching to higher grade refractories. Common failure locations addressed are the tip casting area, outlet cones, and retainer rings. Analysis of each case identifies specific issues and recommends customized solutions.
With over 100,000 users, and 2 decades of experience, Kondass, is the leader in Solar products, UPS systems and servo stabilizers.
Kondaas products are conceived and developed at world - class R&D center and manufactured at our state -of-the-art plant on completely automated process. Every day, the products, we manufacture, Service and distribute, accelerates and energizes, businesses, Industries, homes, hospitals and schools and elevates the quality of life.
Combining deep local insights, and a relentless commitment to operational excellence and values.
We help our customers to grow through reliable UPS and Solar System. We operate in extremely diverse markets, ranging from a small ups to power one computer or one small hut to large machineries or an entire Hospital. Everywhere we operate, we believe that dependable Power Systems is essential to human progress and to advancing economic growth, public health and security.
Integrative high pressure solar water heater Jussi Han
Haiyan Uniepu Trading Co., Ltd is a subsidiary of Uniepu Electric Co., Ltd that manufactures and sells solar water heaters, solar panels, and other renewable energy products. They have over 500 employees including an in-house R&D team. Their product line includes solar water heaters, LED lighting, and solar panels. They export to several countries and aim to provide renewable energy solutions and quality customer service.
This document discusses material selection considerations for various components of an electromechanical product. It provides information on different plastic and metal materials, including their properties, grades, finishes and suitability for different applications. Specific material selections are recommended for parts like housing, covers, trays, brackets based on factors like required strength, temperature and flame resistance, cost and manufacturability. Gasket and thermal interface materials are also discussed along with their characteristic properties.
A Solar Water Heater that blends fine water heating experience with impeccable efficiency, Solarizer Elite performs off the charts. Solarizer Elite’s unique glass-enameled tank keeps your water clean by preventing corrosion and the build-up of bacteria. This extends the Solar Water Heater's lifespan and performance metrics whilst delivering the features it entails.
Solarizer Elite has been designed to exceed your expectations with respect to water heating. All the design metrics are rigorously engineered to provide you with an “Elite” experience in solar water heating.
This document provides information about Aurum Alloys & Engineering LLP, an ISO 9001:2008 certified company that manufactures and exports stainless steel, carbon steel, nickel alloy, and other industrial pipes and tubes. The company aims to provide quality products at competitive prices within specified timelines. It has production and quality testing facilities and exports a wide range of pipes, tubes, and other fabricated metal products internationally.
Solartec Global | Haier Solar Hot Water SystemsSolartec Global
Solartec Global Limited is proud to distribute Haier Solar Hot Water Systems. Available in 180L and 300L systems. The flat collectors are ideal for tropical climates and reduce the cost of accessing hot water.
GAP Holdings manufactures electric and solar water heaters. It offers three main electric models - the Eco Electric, with additional ports for solar or heat pump installation; the Eco Green, ideally suited for direct solar systems; and the Eco Solar, a double-jacketed indirect solar water heater. GAP also provides solar thermal solutions like flat plate collectors and evacuated tube collectors for domestic and commercial use in direct or indirect configurations. The company aims to manufacture energy efficient products and stimulate local economic growth through its South African operations.
Flexible welding cable is designed for secondary side wiring and connecting welding clamps for welding machines. It has a single core structure made of soft wire wrapped in heat-resistant polyester film for insulation and an outer rubber sheath for protection. It is suitable for voltages not exceeding 200V DC or 400V peak and can operate at temperatures up to 65°C. Various models and specifications are provided with conductor cross-sections ranging from 10mm2 to 120mm2.
This document summarizes the specifications of two flat plate solar collectors: the FP-GV2.15-B and FP-GV2.15-C. Both have a gross area of 2.15m^2 and use an aluminum absorber plate, tempered glass cover, and fiberglass insulation. The main differences are that the FP-GV2.15-B has a higher absorber and aperture area, uses electrostatic coating and blue titanium, and has slightly higher thermal efficiency and thicker insulation. Both collectors are grid type constructions approved to various international standards.
CZY is a professional manufacturer which specialized in metal PCB,including the aluminum base board with high performance and high thermal conductivity for LED,copper base board(thermoelectric separation), copper - aluminum composite and so on. For 11 years, we focus on the R&D and manufacture of metal circuit boards. The series of products are: copper base board for automotive lamp, aluminum base board with high thermal conductivity for LED, bendable aluminum base board (0.2mm), 1.5m ultra-long board, and ALC aluminum base board with ultra-high thermal conductivity (122W), etc.
This document provides specifications for various NEON light strip models for top bending, side bending, and regular applications. It describes the key features of each model including their LED density, light output, bending angles, cuttability, IP ratings, and color temperatures. Installation accessories are also listed, along with diagrams showing bending directions and dimensions. The strips use silicone materials and can withstand temperatures from -20°C to +45°C.
The document introduces Risong Polypipe Manufacturer Co., Ltd, a Chinese manufacturer of plastic pipes and fittings. It details the company's history, facilities, certifications, product range which includes over 150 plastic pipe and fitting products for water, gas and heating systems. It provides specifications, characteristics, and applications for the company's multilayer pipe product which combines advantages of metal and plastic pipes.
This document provides details on the construction of a carbon fiber bicycle frame, including specifications for the carbon fiber materials used and laminate constructions for the different frame tubes. Key components include Kevlar and carbon fiber layers at varying angles for strength, aluminum fittings to prevent corrosion, and carbon fiber lugs moulded and glued to join the tubes.
Presentation on Parabolic trough solar collector to produce heated water and ...Zarnainkhan2
A parabolic trough is a type of solar thermal collector used to harness solar energy for various applications, primarily electricity generation. It consists of a long, curved, reflective surface in the shape of a parabola, typically made of glass or polished metal, with a receiver tube running along its focal line. This design allows the trough to concentrate sunlight onto the receiver tube, which contains a fluid such as oil or molten salt. As sunlight hits the reflective surface, it is focused onto the receiver, where the fluid absorbs the heat. This heated fluid is then used to generate steam, which drives a turbine connected to an electrical generator, producing electricity. Parabolic troughs are widely used in concentrated solar power (CSP) systems due to their efficiency, reliability, and ability to operate in a wide range of conditions. They are commonly found in large-scale solar power plants in sunny regions around the world.
This document provides specifications for borosilicate glass 3.3 tubing and rod from Linuo Group Co. It includes:
1. Physical and chemical performance parameters such as coefficient of linear expansion, viscosity temperatures, density, and chemical composition.
2. Guidelines for processing the glass tubing including recommended annealing temperatures and schedules.
3. Detailed specifications listing available outside diameters and wall thickness options for borosilicate glass tubing and rods.
The document presents a presentation on flat plate solar collectors. It discusses that flat plate collectors consist of an insulated metal box with a glass or plastic cover and a dark absorber plate. Solar radiation passes through the cover and heats the absorber plate. A fluid circulates through tubes connected to the plate to transfer the heat. Flat plate collectors are commonly used for domestic hot water and space heating. They can achieve temperatures up to 100°C. While simpler than other collectors, they require a large surface area for high energy output. The presentation covers the components, materials, applications and advantages of flat plate collectors.
The document presents a presentation on flat plate solar collectors. It discusses that flat plate collectors consist of an insulated metal box with a glass or plastic cover and a dark absorber plate. They are able to heat liquid or air to temperatures under 180°F. The key components are the transparent cover, tubes and fins for fluid flow, a metallic absorber plate, insulation, and an enclosing casing. Materials for the different components must have properties like high conductivity, strength and durability. Flat plate collectors are widely used for domestic hot water and some commercial applications like laundromats due to their ability to use both direct and diffuse sunlight without orientation requirements.
This document describes the AL 33D premium ACP panel from Aludecor. It has a 3mm thickness with a 0.3mm coil thickness and comes with an LDPE or fire-rated core. The product offers unmatched quality in the 3mm segment with international designs. It uses corrosion-resistant 3105 alloy and has a 20-year extended warranty due to its PVDF paint. The panel can take various shapes and colors and has high wind load resistance. It also has benefits for LEED building standards like using recycled materials and offering energy efficiency.
Order your samples of Thermal Interface Materials ! New products, New markets. Please give us a call or send me an email: haydee.dibble@schlegelemi.com
This document summarizes solar energy products from UNIEPU Trading Co., including solar water heaters, solar panels, portable solar power systems, and a solar ethanol still. It provides product descriptions, specifications, and pictures. The company offers a range of solar thermal and photovoltaic products for residential, commercial, and industrial use to provide renewable energy for better life.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Easily Verify Compliance and Security with Binance KYCAny kyc Account
Use our simple KYC verification guide to make sure your Binance account is safe and compliant. Discover the fundamentals, appreciate the significance of KYC, and trade on one of the biggest cryptocurrency exchanges with confidence.
How to Implement a Strategy: Transform Your Strategy with BSC Designer's Comp...Aleksey Savkin
The Strategy Implementation System offers a structured approach to translating stakeholder needs into actionable strategies using high-level and low-level scorecards. It involves stakeholder analysis, strategy decomposition, adoption of strategic frameworks like Balanced Scorecard or OKR, and alignment of goals, initiatives, and KPIs.
Key Components:
- Stakeholder Analysis
- Strategy Decomposition
- Adoption of Business Frameworks
- Goal Setting
- Initiatives and Action Plans
- KPIs and Performance Metrics
- Learning and Adaptation
- Alignment and Cascading of Scorecards
Benefits:
- Systematic strategy formulation and execution.
- Framework flexibility and automation.
- Enhanced alignment and strategic focus across the organization.
Best practices for project execution and deliveryCLIVE MINCHIN
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Industrial Tech SW: Category Renewal and CreationChristian Dahlen
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Digital Marketing with a Focus on Sustainabilitysssourabhsharma
Digital Marketing best practices including influencer marketing, content creators, and omnichannel marketing for Sustainable Brands at the Sustainable Cosmetics Summit 2024 in New York
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Catalog -sunhome
1. Ⅰ.Company Profile
Jiangsu Sunhome New Energy Co.,Ltd is one of the top professional manufactures in
China since 1998. We engage in research,development and application of solar energy
products. We are also an excellent exporter and have established long term
relationships with many overseas customers. Sunhome products could perform under all
weather conditions. Therefore, our products are sold to more than 76 countries and
regions such as Europe, America, Australia, Africa and Southeast Asia, and so on.
Our products are produced under advanced equipments with top raw materials. Full-time
strict quality control covers all steps of the production process and make sure no finished
goods with manufacturing fault.We provide timely after-sale service and solar water
heater technology consultant. Sunhome closely follows the steps of the developed
counties to research more high-tech solar products to meet the Environment-Friendly and
energy-saving.
Sunhome solar product has been produced according to European EN 12975 standards.
And we have already been awarded ISO9001,ISO14001, CCC and CE certifications.
We are experienced in offering OEM service to different customers from many countries.
We able to produce any Solar Water Heater according to your detailed specifications.
All enquiries are welcome.
1
2. Ⅱ.Solar Collector
1.Heat Pipe Solar Collector
●Used in split solar heating system for water heating, Solar collectors with
different quantity of vacuum tube can be assembled with a water tank of
different capacity.
●Perfectly designed, suitable for any architectural style, and harmoniously
integrated with owner’s building.
●Collector can be installed in a single house as well as a commercial
building with a centralized hot water system!
●The collector’s integrated and modularized design is optimized for both
installation and operation.
●Economical, affordable, energy saving, environmentally friendly!
●Models available:SHHPC58 and SHHPC47 series with required no of tubes
Characteristics:
1. Easy installation Quick start
2. Connected to tap water, working under pressure
3. Average daily heat efficiency> 60%
4. Vacuum tube separated from water, high thermal stability, no tube blast
5. No water running in the vacuum tube, this eliminates the low heat transfer efficiency of
water
6. Collectors can be connected either in series or in in parallel to increase utilization and
flexibility of the installation.
7. Single broken vacuum tubes do not affect the operation of the remaining system.
8. water jackets protect the rubber rings and dust-proof rings from aging and falling off
9. The high-tech treated vacuum tube and super heat pipe release the pressure on
proper time
10. Waterless vacuum tubes also solve any issues related to calcification of the tubes and
the associated reduction in efficiency.
2
3. ◆ Technology:
Model Type SHHPC
Manifold casing material Aluminum painted un-oxygen layer
Frame material (Aluminum or Stainless Steel or Galvanized Steel)
and painted Layer
Header pipe material Copper
Heat pipe material Copper
Insulation Polyurethane 55mm
Rubber seals and rings UV stabilized high temperature silicon rubber
Test pressure 9 bar
Collector mounting Plane roof/slope roof
Angle of operation 10℃-80℃
Inlet Outlet Φ22 or 3/4 inch male
3
5. 2.U Pipe collector
The liquid (usually a glycol-water antifreeze mixture) ) in the U pipe heats up, and
conducts the heat energy to the water inside the storage tank through plate exchanger or
internal spiral coils.
5
6. Feature:
1.Can operate with water pressure up to 6 bar;
2.Can be combined with existing energy source
3.Storage do not need be installed above the collector
◆ Specifications:
Model SHUPC58/12 SHUPC58/15 SHUPC58/18 SHUPC58/20
Type of Class Tube ø 58 x 1800mm
Number of Tube 12 15 18 20
U Pipe copper
Header tuber copper
Insulation Polyurethane or Rock wool
Fluid Type pure water or 50/50 propylene glycol and water mixture
Tested Pressure 10Bar 10Bar 10Bar 10Bar
System Pressure 6Bar 6Bar 6Bar 6Bar
Cut Lenth of ≥50% ≥50% ≥50% ≥50%
efficiency
Ligthing Area(m²) 1.71 2.14 2.57 2.86
Absorb Area(m²) 0.99 1.24 1.48 2.03
Packing Demension 2050X1160X110 2050X1326X130 2050X1556X130 2050X1726X130
3.Flat Plate Solar Collector
Special Anodized aluminum alloy frame to ensure handsome appearance and can accept
high pressure without leakage
Operation Temperature -33℃~120℃
Patterned temper glass or low iron temper glass (4mm thickness) is not easy broken with
very high transmission and low emission Black chrome or Magnetic blue sputtering
coating has very higher absorption rate to ensure the high efficiency.
6
8. SHFPC-2.02 DESCRIPTION
(solarkeymark certificated)
)
Size(mm)out line 2000 x 1010x 95mm
Copper riser tubes Ø10mm x0.5mm 8pcs
Copper header Ø22 x 0.6mm 2 pcs
Copper Absorber Fin 125mm wide, 0.15mm thick
Surface coating Black chrome
Insulation material 50mm Glasswool, 24K
Frame Aluminum alloy in 1.3mm thick
Frame color bronzed, white color, black
Glass 3.2mm tempered & patterned glass
with transmission 92% (anti-reflection)
Sealing profile EPDM
Backing sheet aluminium material 0.5mm
M Collectors (Model:SHFPC-2.0M)
Absorber
Type Flat plate tube
Absorber fin material Copper
Absorber fin dimensions 1,970mm×970mm
Sputtered surface Black chromium,having selective surface
decalescence
Feature Absorptivity & Emittance
are according to BC091
Absorptivity α=0.93(±0.05)
Emittance ε=0.12(±0.02)
Tube Array
Riser to heat layer joint Supersonic melting solder
Header to riser joint Copper Silver solder
Header material Type C-copper tube, to AS 1432-1973
Header size Φ 25mm OD, 0.71 mm wall thickness
Riser material Type C-copper tube, to AS 1432-1973
Riser size Φ 12 mm OD, 0.40 mm wall thickness
Number of risers 7
8
9. Collector socket material Free machining brass
Collector socket thread size 20mm(3/4” BSP)
Maximum torque 0.03 kN-m
Connection pip size 19.1mm OD ( 3/4”)
Weights & Measures
Weight empty 38kg
Weight full 40kg
Structural pressure test 800kPa
BT Collectors (Model:SHFPC-2.0BT)
Absorber
Type Flat plate and tube
Absorber fin material Copper
Absorber fin dimensions 1,970mm×970mm
Sputtered surface TINOX® high selectivity coating,Made in
Germany
Feature Absorptivity&Emittance
are according to BC091
Absorptivity α=0.95(±0.05)
Emittance ε=0.04(±0.02)
Tube Array
Riser to heat layer joint Supersonic melting solder
Header to riser joint Copper Silver solder
Header material Type C-copper tube, to AS 1432-1973
Header size Φ 25mm OD, 0.71 mm wall thickness
Riser material Type C-copper tube, to AS 1432-1973
Riser size Φ 12mm OD, 0.40mm wall thickness
Number of risers 7
Collector socket material Free machining brass
Collector socket thread size 20mm(3/4“BSP)
Maximum torque 0.03 Kn-m
Connection pipe size 19.1mm OD ( 3/4“)
Weights & Measures
Weight empty 38kg
Weight full 40kg
Structural pressure test 800kPa
9
10. 4.All Glass Vacuum Tube Solar Collector
Features:
Reliable,efficient,Twin-Glass Vacuum tube
Easy plug-in installation and Features:
An economical solution
Could be either vertically or horizontally positioned
Especially suit large commercial or industrial applications, such as farm, restaurant, hotel,
factory,etc.
frame : Imported color steel and aluminum-zinc plated steel, coated with hi-tech
corrosion-resistant layer
MODEL Absorbing vacuum tube
Area
(m2) diameter length tube
SHGTC47/60 6.00 Φ 47mm 1500mm 60
SHGTC58/50 7.14 Φ 58mm 1800mm 50
10
11. Ⅲ.Solar Water Heater
1.Direct Thermosiphon solar system
1).Features
●Inner tank: Food Grade Stainless Steel(SUS304/2B) by argon protect welding;
●Outer shell: Galvanized Steel coated anti-corrosion layer or stainless steel
●Insulation layer: 50-60mm import polyurethane integral foaming
●Frame: Galvanized Steel coated with anti-corrosion layer, both installed on inclined
and flat roof.
● Vacuum tube:47*1500mm and 58*1800mm with AL/N/AL selective surface or
Cu-Ss-Al
●High Pressure Cold Water In:6 bar cold water to tank from Feeder or Electric Auto
Valve.
11
13. 2.Indirect Thermosiphon systems
Thermosiphon solar collectors provides mains pressure pre-heating via a high
efficiency copper coil heat exchanger located within the solar collector tank.
The way in which the Mains Pressure solar collector heats water is the same
as the Non pressure solar collector. Rather than using the water in the tank
directly, as the Non pressure does, the type uses a 45 ~ 60m copper coil
13
14. Specification
Copper Coil Heat Exchanger Specifications
HE Material 14mm×1.0mm copper pipe
HE Surface Area 2.5m² for 30 tube water heater
HE Testing Pressure 9 bar
HE net weight 22kg for 30 tube water heater
MODEL Lighting vacuum tube Qty.per20'/40' Container
2
(m ) diameter length tube
SHITS58/20 2.88 Φ 58mm 1800mm 20 32/65
SHITS58/24 3.46 Φ 58mm 1800mm 24 30/62
SHITS58/30 4.32 Φ 58mm 1800mm 30 24/50
3.High Pressure Compact Solar Water Heater
Solar collector evacuated tubes collect and convert sunshine energy into
thermal energy, which is transferred to the central heat pipes in the tubes
through the aluminum fins bridging the tube inner surfaces and the heat pipes.
The copper heat pipes have tiny amount of purified water sealed in them at
depressurized condition. When heated, the water inside the heat pipes
vaporizes at low temperature (about 30˚ C). The vapor (steam) rises to the
pipe tips inserted into the water contained in the tank. Vapor is cooled down
14
15. and becomes condensate falling to the bottom of the pipes. By continuously
circulating this way, heat is carried from outside to the water inside the tank.
● Heat Pipe Plus Vacuum Tube structure, no any water in tube, if one tube broken, no
leakage
● High pressure storage tank(Testing pressure=9 bar)
● Highly efficient heat pipe technology
● No sealing rubber is needed and hence no leaking problem
● Easy plug-in installation
● Anti-freeze
15
16. Inner Tank 304 Stainless steel
Outer Shell of Tank Galvanized steel Sheet, Surface plastic painting
Supporting Frame Galvanized steel Sheet, Surface plastic painting
Insulating Layer Foaming polyurethane, Thickness:55mm
Working Pressure Normal working pressure: 6bar Test pressure: 9bar
Electric Booster 1500W
Absorb Tank
Heat pipe Qty.per20'/40'
MODEL Area capacity
Container
(m2) diameter length No. (L)
SHPTS58/18 2.59 Φ 58mm 1800mm 18 150 41/79
SHPTS58/20 2.88 Φ 58mm 1800mm 20 165 32/65
SHPTS58/24 3.46 Φ 58mm 1800mm 24 200 30/62
SHPTS58/30 4.32 Φ 58mm 1800mm 30 250 25/50
Ⅳ.Active Solar Water Heater Systems
16
17. 1.Active Open Loop Solar Water Heater Systems
An Open Loop Water Heating System provides many advantages It is the simplest and
typically the least expensive active system to install. There is no heat exchanger, which
allows efficient heat transfer directly to the water.
The system Operates at standard line pressure.
When there is not enough energy for sun, an
electrical back up element will be automatically
switched on by controller.
1).Models available
Model Cubage(L) Heat pipe solar collector Lighting
(m²)
Diameter(mm) Length (mm) No.
SHOLS100 100 47 1500 20 2.22
SHOLS200 200 58 1800 20 3.00
SHOLS300 300 58 1800 30 4.29
2).Systems Running Principle:
1. Solar Collector 5. Tempering Valve 9. Circulating Pump
2. Manual Air Valve 6. Collector Return 10.Roma Valve
3. Hot Water to Taps 7.Collector Supply 11. DHW Electric Tank
17
18. 4.Cold Feed 8. Non Return Valve 12. Immersion Heater
2.Active Closed Loop Solar Water Heater Systems
A 50/50 propylene glycol and water mixture from the collectors through a coil of pipe in the
solar tank, and then is pumped back through the collectors. The potable water is warmed
by heat transfer through contact with the pipe. These systems are pretty much the only
choice in very cold climates. When there is not enough energy for sun, an electrical or gas
back up element will be automatically switched on by controller.
1). Feature:
● Simple Installation,No Maintenance,Effective operation
● Easy Retrofitting To Existing systems
● Suitable for single and multiple solar heating Application systems,
● Preferred option for extremely cold areas and questionable water quality.
● Incoming potable water is routed to the solar storage tank
● Porcelain Enemal or SUS304 Stainless Steel Storage Tank With Electrical or gas Back
Up
● Double-walled Copper Coil heat exchangers in storage tank prevent contamination of
household water.
18
19. 2).High pressure tank specification:
Items 100L 150L 200L 250L 300L 400L 500L
inner vessel diameter φ368 φ438 φ542 φ613
water tank dimension φ450 φ520 φ620 φ710
material and thickness of BTC340R 1.8 BTC340R 2.0 BTC340R 2.5
the inner vessel
material and thickness of galvanized sheet 0.5
the shell
insulation thickness 40 40 40 40 40 50 50
Surface area heat 0 0 0.4 0.4 0.4 0.5 0.5
exchanger top(m2)
Surface area heat 0.6 0.6 0.6 0.6 0.7 0.8 0.8
exchanger bottom(m2)
installation size of water NPT3/4"
pipe
rated heating power 1.5KW 2.5
working pressure 0.7MPa
Overall φ450×1105 φ450×1 φ520×1 φ620×1 φ620×1 φ710×1 φ710×1
dimension(references) 570 530 280 530 580 715
Packing case size 480×480×120 480×48 550×55 655×65 655×65 740×74 740×74
0 0×1665 0×1625 5×1375 5×1625 0×1675 0×1800
Weight(references)(Kg) 46 58 68 75 95 112 122
Note: inner tank can be made of sus304/2b with thickness from 1.5mm to 2.0mm
19
20. 3).Systems Specifications:
Model Tank Heat pipe or U Pipe Collector Work Station
Capicaty
Φ58X1800 No.
SHCLS150S 150L Φ58X1800 24(1 collector for 15 tubes) A circulating unit
system that gather
SHCLS200S 200L Φ58X1800 30(1 collector for 20 tubes) controller and pump
station
SHCLS300S 300L Φ58X1800 30+20
(2 collectors)
SHCLS400S 400L Φ58X1800 30X2
(2 collector for 30 tubes)
SHCLS500S 500L Φ58X1800 30X2+20X1
(2 collector for 30 tubes,
and 1 collector for 20 tubes)
20
21. 4).Systems Running Principle:
1. Collector 7. Check Valve 13. Pressure Gauge
2. Collector Sensor 8. Hose Bibs for Filling and Draining 14. Collector Supply
3. Manual Air Valve 9. Expansion 15. Heat Exchange Coil
4. Hot Water to Taps 10. Air Scoop & Air Vent 16.Solar Storage Tank
5 .Tempering Valve 11. Circulating Pumb 17. Immersion Heater
6. Collector Return 12. Pressure Relief Valve 18.Controller
Ⅴ.Application
1). Close loop system with electrical/gas back up
Closed Loop Solar Heating Systems are suitable for single and multiple solar heating
Application systems, e.g. domestic solar water heating, solar water heating hot tub, solar
Swimming pool heating or solar space heating systems. The Closed Loop Solar Systems
suitable for areas with questionable water quality and all climate conditions. The Closed
Solar Heating Systems are the preferred option for extremely cold areas. When there is
not enough energy for sun, an electrical or gas back up element will be automatically
switched on by controller.
2).Pool Heating
If you have taken steps to retain your pool’s heat but are still not happy with your
heating bills, or if you plan to install a new pool, a solar pool heater may be a good
investment. Such heating systems are one of the most cost-effective applications of solar
energy. It is relatively simple to integrate a solar water heater since most pools require a
21
22. pump, filter, and plumbing.With a solar energy system, the pool’s water is pumped
through the filter and then through a solar energy collector(s) instead of directly back to
the pool. The sun heats the water in the collector(s) before it returns to the pool.
If you add a solar heater, you may need a pump larger than your present one, or a
separate, smaller pump to pump the pool’s water to and through the solar collectors.
Adding any heater, solar or otherwise, will preclude selecting the smallest pump.
Nevertheless, you also may reduce pumping time to help cut costs.
3).Space-Heating
The solar collector System is capable of contributing significantly to space heating
requirements in many areas. The best use for solar energy is to heat a building by radiant
under floor hydraulic heating, which requires water at a temperature of around 60C. This
system usually uses a concrete floor slab with special water pipes running through it, to
provide a pleasant, even, low temperature radiant heat. The floor slab will also provide
heat
4).Project
六、Contact us
Jiangsu Sunhome New Energy Co., Ltd.
Add:No.4 North Taihe Road,Houyu town,Changzhou city,Jiangsu Province, China
Tel: 0086 519083680935 Fax:0086-519-83689920
Web site: www.cnsunhome.com
22