Solar production with K means clustering
•Download as PPTX, PDF•
0 likes•6 views
This presentation explores how K-means clustering can be used to analyze solar production data and identify patterns that can help optimize energy generation. visit https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/ for more
Report
Share
Report
Share
Recommended
Study of using solar energy system to supply a data center
This document studies using a solar energy system to supply the power needs of a data center. It summarizes the basic components of the system, which includes solar panels, batteries, a charge controller, inverters/converters, and the power grid. It then presents simulation results of the system modeling the solar irradiance in Tehran and the varying power demands of the data center. The results show the solar panels can generate up to 1.2 MW at midday, but most of the time cannot meet the full 2 MW load of the data center. The batteries charge and discharge to help meet demands, with one battery acting as primary and the other as backup. The power grid supplies any remaining load needs when the solar and batteries
IRJET- Performance Assessment of Grid Connected 1.1 MWp Solar Photo-Voltaic P...
This document summarizes the performance assessment of a 1.1 megawatt solar photovoltaic plant located in India. It describes the technical details and specifications of the solar panels, inverters, and overall system. It then discusses the methodology used to analyze the plant's performance, including generation analysis, inverter loss analysis, inverter efficiency, system loss analysis, and performance ratio analysis. The results of simulating the plant's performance using PVSYST software are also presented and compared to actual measured performance data. Key findings include the plant generating an average of 166 kilowatt-hours per month with losses primarily coming from dust, temperature effects, and system wiring.
Reviewing the factors of the Renewable Energy systems for Improving the Energ...
Electricity demand around the globe has increased alarmingly and is increasing at high rates. Therefore,
electricity supply by the conventional resources is not sufficient right now and the generation of electricity by
these resources is causing pollution worldwide. As the recent world is moving towards the alternative and
renewable resources of energy that include sun, wind, water, and air. This paper focuses on reviewing the
renewable energy sources used to improve the energy efficiency. This paper presents how the maximum power
generation capacity can be achieved using these sources. Main focus of this paper is on solar and wind power
that is freely available all around the globe. This paper concludes that there are certain factors that should be
considered while generating power from these sources. The factors include the calculation of radiation data,
storage size and capacity calculation, and geographic dispersion of the plants.
Summary of thesis
This document summarizes a student thesis project that analyzed balancing power supply and demand in a smart grid system using distributed energy resources (DER) in Bangladesh. The thesis used HOMER software to simulate a microgrid model for a small community with solar, wind, and biomass energy sources, as well as an energy storage system. It then developed a MATLAB graphical user interface called 'sMeter_v2015a' to allow users to observe system responses in real-time by changing the time input. The goal was to optimize local power supply and demand through increased use of renewable resources and consumer participation in energy storage and selling to the grid. Data on solar radiation, wind speed, and available biomass was collected for Chittag
Design a Highly Efficient Push-Pull converter for Photovoltaic Applications
Design a schematic to extract maximum obtainable solar power from a PV module and use the energy for a DC application. This project investigates in detail the concept of Maximum Power Point Tracking (MPPT) which significantly increases the efficiency of the solar photovoltaic system.
IRJET- Review Paper on Residential Grid Connected Photovoltaic System using M...
This document summarizes a research paper about designing a residential grid-connected photovoltaic (solar) system using MATLAB. It begins by discussing the increasing global energy demand and issues with non-renewable sources. Solar energy is presented as a viable renewable alternative. The paper then reviews literature on solar cell modeling and maximum power point tracking (MPPT) algorithms. It describes the basic working principle of solar cells and the MATLAB software used for modeling and simulation. Simulation results are shown for the designed solar system model connected to the grid. The conclusion discusses the benefits of solar energy and potential for improving MPPT under changing environmental conditions.
White_Paper_Green_BTS_NEC_MAIN_PAPER_150115_Release
This document discusses using predictive analysis to optimize energy management systems. It proposes integrating predictive analytics with energy management systems (EMS) to improve optimization of energy source selection and usage. Currently, EMS systems select energy sources like grid, diesel, solar, batteries based on simple priority rules. Integrating predictive analytics can help EMS systems better forecast power outages and optimize cost and emissions by deciding which sources to use and in what proportion, based on machine learning of past and present energy and environmental data to predict the future. This could increase optimization of source selection from the current 40-50% with traditional EMS to 80-90%. The document uses telecom tower energy usage as a case study.
Self Electricity Generation and Energy Saving By Solar Using Programmable Sys...
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation.
Recommended
Study of using solar energy system to supply a data center
This document studies using a solar energy system to supply the power needs of a data center. It summarizes the basic components of the system, which includes solar panels, batteries, a charge controller, inverters/converters, and the power grid. It then presents simulation results of the system modeling the solar irradiance in Tehran and the varying power demands of the data center. The results show the solar panels can generate up to 1.2 MW at midday, but most of the time cannot meet the full 2 MW load of the data center. The batteries charge and discharge to help meet demands, with one battery acting as primary and the other as backup. The power grid supplies any remaining load needs when the solar and batteries
IRJET- Performance Assessment of Grid Connected 1.1 MWp Solar Photo-Voltaic P...
This document summarizes the performance assessment of a 1.1 megawatt solar photovoltaic plant located in India. It describes the technical details and specifications of the solar panels, inverters, and overall system. It then discusses the methodology used to analyze the plant's performance, including generation analysis, inverter loss analysis, inverter efficiency, system loss analysis, and performance ratio analysis. The results of simulating the plant's performance using PVSYST software are also presented and compared to actual measured performance data. Key findings include the plant generating an average of 166 kilowatt-hours per month with losses primarily coming from dust, temperature effects, and system wiring.
Reviewing the factors of the Renewable Energy systems for Improving the Energ...
Electricity demand around the globe has increased alarmingly and is increasing at high rates. Therefore,
electricity supply by the conventional resources is not sufficient right now and the generation of electricity by
these resources is causing pollution worldwide. As the recent world is moving towards the alternative and
renewable resources of energy that include sun, wind, water, and air. This paper focuses on reviewing the
renewable energy sources used to improve the energy efficiency. This paper presents how the maximum power
generation capacity can be achieved using these sources. Main focus of this paper is on solar and wind power
that is freely available all around the globe. This paper concludes that there are certain factors that should be
considered while generating power from these sources. The factors include the calculation of radiation data,
storage size and capacity calculation, and geographic dispersion of the plants.
Summary of thesis
This document summarizes a student thesis project that analyzed balancing power supply and demand in a smart grid system using distributed energy resources (DER) in Bangladesh. The thesis used HOMER software to simulate a microgrid model for a small community with solar, wind, and biomass energy sources, as well as an energy storage system. It then developed a MATLAB graphical user interface called 'sMeter_v2015a' to allow users to observe system responses in real-time by changing the time input. The goal was to optimize local power supply and demand through increased use of renewable resources and consumer participation in energy storage and selling to the grid. Data on solar radiation, wind speed, and available biomass was collected for Chittag
Design a Highly Efficient Push-Pull converter for Photovoltaic Applications
Design a schematic to extract maximum obtainable solar power from a PV module and use the energy for a DC application. This project investigates in detail the concept of Maximum Power Point Tracking (MPPT) which significantly increases the efficiency of the solar photovoltaic system.
IRJET- Review Paper on Residential Grid Connected Photovoltaic System using M...
This document summarizes a research paper about designing a residential grid-connected photovoltaic (solar) system using MATLAB. It begins by discussing the increasing global energy demand and issues with non-renewable sources. Solar energy is presented as a viable renewable alternative. The paper then reviews literature on solar cell modeling and maximum power point tracking (MPPT) algorithms. It describes the basic working principle of solar cells and the MATLAB software used for modeling and simulation. Simulation results are shown for the designed solar system model connected to the grid. The conclusion discusses the benefits of solar energy and potential for improving MPPT under changing environmental conditions.
White_Paper_Green_BTS_NEC_MAIN_PAPER_150115_Release
This document discusses using predictive analysis to optimize energy management systems. It proposes integrating predictive analytics with energy management systems (EMS) to improve optimization of energy source selection and usage. Currently, EMS systems select energy sources like grid, diesel, solar, batteries based on simple priority rules. Integrating predictive analytics can help EMS systems better forecast power outages and optimize cost and emissions by deciding which sources to use and in what proportion, based on machine learning of past and present energy and environmental data to predict the future. This could increase optimization of source selection from the current 40-50% with traditional EMS to 80-90%. The document uses telecom tower energy usage as a case study.
Self Electricity Generation and Energy Saving By Solar Using Programmable Sys...
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Theoretical work submitted to the Journal should be original in its motivation or modeling structure. Empirical analysis should be based on a theoretical framework and should be capable of replication. It is expected that all materials required for replication (including computer programs and data sets) should be available upon request to the authors.
The International Journal of Engineering & Science would take much care in making your article published without much delay with your kind cooperation.
Solar Energy Output Forecasting from SolarGIS Data for Connected Grid Station
Using random forest regression method, daily mean solar output generation
can yield promising result rather
than conventional NWP model
for
forecasting. Using that in practice also the goal was to create a user-friendly
application , with easy access, to provide accurate forecasting regarding
saving and conservation. This is the final report for my master thesis project for M.Sc.
Forecasting Solar Power by LSTM & DBN Techniques using ML
This document discusses using machine learning techniques like Long Short-Term Memory (LSTM) and Deep Belief Networks (DBN) to forecast solar power generation. It analyzes pure datasets on solar panel output, weather, and air pollution to extract features. An Autoencoder-LSTM model is proposed that uses the autoencoder for feature learning and LSTM to incorporate temporal data. The model is trained on extracted features and forecasts are compared to actual data to evaluate performance. Accurate solar power forecasting can improve energy grid stability and reduce operational costs.
Grid Integration and Application of Solar Energy; A Technological Review
This document provides a review of technologies for integrating solar energy conversion systems into the main electric grid. It discusses challenges of the intermittent nature of solar energy and various technological solutions to address issues like power quality, synchronization, and power monitoring. Key points covered include the types of single-stage and dual-stage grid-tied solar energy systems, the role of inverters in performing functions like reactive power compensation and harmonics mitigation, and forecasting methods used to predict solar power generation. The document also reviews various research works on controlling and managing the real and reactive power from solar systems while maintaining power quality standards when connected to the grid.
REVIEW ON SOLAR ENERGY RESOURCES AND PV SYSTEM
This document provides a literature review of 15 sources on solar energy resources and photovoltaic (PV) systems. It discusses India's plans to increase use of solar energy to reduce reliance on conventional power and promote renewable energy. The sources covered examine topics like solar energy harvesting technologies, bibliometric analysis of solar research, improvements in solar cell efficiency, sizing solar panels and batteries, awareness of solar energy in Nigeria, factors affecting the price of solar modules, electricity generation from solar energy, a case study of solar PV systems in Nigeria, using wind and solar to reduce electricity deficits in India, designing solar trees for homes, installing solar energy in Nigeria, and sustaining solar energy production in coastal regions.
DataScienceForRenewableEnergy.pptx
This document provides an overview of how data science can be applied to renewable energy. It discusses how renewable energy data like weather data, power output data, and grid data can be analyzed using predictive modeling, time series analysis, and machine learning to forecast energy generation and optimize systems. Challenges like data quality, integration of different data sources, and uncertainty are addressed. Optimization techniques can be used to determine optimal resource allocation and grid planning to integrate renewable energy. Data-driven insights from performance monitoring and predictive maintenance can improve renewable energy efficiency. Future trends include advancement in machine learning, integration of IoT technologies, and use of big data analytics.
System efficiency prediction of a 1kW capacity grid-tied photovoltaic inverter
System efficiency prediction of a 1kW capacity grid-tied photovoltaic inverterInternational Journal of Power Electronics and Drive Systems
This article presents the system design and prediction performance of a 1kW capacity grid-tied photovoltaic inverter applicable for low or medium-voltage electrical distri-bution networks. System parameters, for instance, the longitude and latitude of the solar plant location, panel orientation, tilt and azimuth angle calculation, feasibility testing, optimal sizing of installment are analyzed in the model and the utility is sim-ulated precisely to construct an efficient solar power plant for residential applications. In this paper, meteorological data are computed to discuss the impact of environmen-tal variables. As regards ensuring reliability and sustenance, a simulation model of the system of interest is tested in the PVsyst software package. Simulation results yield that the optimum energy injected to the national grid from the solar plant, specific pro-duction, and performance ratio are 1676kWh/year, 1552kWh/kWp/year, and 79.29% respectively. Moreover, the predicted carbon footprint reduction is 23.467 tons during the 30 years lifetime of the system. Therefore, the performance assessments affirm the effectiveness of the proposed research.Efficient Energy Management System with Solar Energy
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
report 2
This document discusses the design and analysis of a rooftop solar photovoltaic plant for six buildings on a university campus. It involves using software tools like PV Watts and PvSyst to design the solar systems and calculate expected output. Key aspects covered include panel selection and arrangement, economic considerations, system losses, and layout designs for each building. The goals are to meet part of the energy demand for the buildings and reduce the campus' carbon footprint in line with its sustainability plan.
mehtodalgy.docx
The document discusses using machine learning techniques to predict power factor variations in an electrical power system of a cement plant factory. It aims to replace existing real-time monitoring techniques, which are costly, with machine learning models to predict power factor. This can help reduce errors, maintenance costs, and improve system reliability in a more cost-effective way. The document also reviews various literature on load forecasting and power demand prediction using techniques like neural networks and deep learning.
thotakura2020.pdf
This document summarizes a case study on the operational performance of a 1 megawatt rooftop solar photovoltaic plant in India. The study monitored the plant's performance over 12 months and compared the real energy outputs to simulations from three tools: PVGIS, PV Watts, and PV Syst. On average, PVGIS predictions were most accurate with a 5.33% mean bias error, followed by PV Watts at 12.33% and PV Syst at 30.64% error compared to actual outputs. While simulations provided estimated performance, real-world monitoring showed deviations from predictions and is important for assessing solar projects.
Control for Grid Connected and Intentional Islanding of Distributed Power Gen...
As the demand for more reliable and secure power system with greater power quality increases, the concept of distributed generation DG have become more popular. This popularity of DG concept has developed simultaneously with the decrease in manufacturing costs associated with clean and alternative technologies like fuel cells, biomass, micro turbine and solar cell systems. Intentional islanding is the purposeful sectionalisation of the utility system during widespread disturbances to create power “islandâ€. This island can be designed to maintain a continuous supply of power during disturbances of the main distribution system. Ruchali Borkute | Nikita Malwar ""Control for Grid Connected and Intentional Islanding of Distributed Power Generation"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23679.pdf
Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23679/control-for-grid-connected-and-intentional-islanding-of-distributed-power-generation/ruchali-borkute
IRJET-System Analysis and Optimization of Photovoltaic –Wind Hybrid System: R...
This document reviews the use of artificial intelligence techniques to optimize photovoltaic-wind hybrid energy systems. It discusses various modeling approaches for system components like solar panels, wind turbines, batteries and loads. Traditional optimization methods like iterative, graphical and linear programming techniques are compared to newer artificial intelligence approaches like particle swarm optimization and genetic algorithms. The review concludes that artificial intelligence methods provide more accurate and faster optimization of hybrid systems compared to traditional techniques.
Performance analysis of grid-tied photovoltaic system under varying weather c...
Model and simulation of the impact of the distribution grid-tied photovoltaic (PV) system feeding a variable load with its control system have been investigated in this study. Incremental Conductance (IncCond) algorithm based on maximum power point tracking (MPPT) was implemented for the PV system to extract maximum power under different weather conditions when solar irradiation varies between 250 W/m 2 and 1000 W/m 2 . The proposed system is modelled and simulated with MATLAB/Simulink tools. Under different weather conditions, the dynamic performance of the PV system is evaluated. The results obtained show the efficacy of the proposed MPPT method in response to rapid daytime weather variations. The results also show that the surplus power generated is injected into the grid when the injected power from the PV system is higher than the load demand; otherwise, the grid supplies the load.
Techno_Economic_Analysis_of_Solar_Hybrid_System_for_Residential_Sector.pdf
This document analyzes the technical and economic performance of grid-connected solar photovoltaic systems with battery storage for residential consumers in India. Load profiles of two consumers with identical solar capacity but different usage patterns are examined. Resizing the battery storage to 6 hours of backup reduces grid dependency and lowers electricity bills, especially during peak pricing hours. While the levelized cost of energy is the same for both consumers, the payback period differs due to varying annual savings from load patterns and time-of-day electricity pricing. Increasing battery storage capacity and reducing payback times can encourage more residential consumers to adopt solar energy to meet their needs.
Study of Grid Integrated SPV System
The document summarizes a study of an optimal grid-integrated solar PV system. A hybrid system was modeled using HOMER software to integrate a 25 kWp solar PV array with the existing electrical grid. Simulation results found the system could meet the local load of 69 kWh/day while selling excess solar energy to the grid. The optimal system achieved 79% renewable energy penetration and a net annual energy export of 17,505 kWh to the grid. The study contributes to the design and optimization of grid-connected solar PV systems.
Data Analysis for Solar Energy Generation in a University Microgrid
This paper presents a data acquisition process for solar energy generation and then analyzes the dynamics of its data stream, mainly employing open software solutions such as Python, MySQL, and R. For the sequence of hourly power generations during the period from January 2016 to March 2017, a variety of queries are issued to obtain the number of valid reports as well as the average, maximum, and total amount of electricity generation in 7 solar panels. The query result on all-time, monthly, and daily basis has found that the panel-by-panel difference is not so significant in a university-scale microgrid, the maximum gap being 7.1% even in the exceptional case. In addition, for the time series of daily energy generations, we develop a neural network-based trace and prediction model. Due to the time lagging effect in forecasting, the average prediction error for the next hours or days reaches 27.6%. The data stream is still being accumulated and the accuracy will be enhanced by more intensive machine learning.
IRJET- Parametric Study of Grid Connected PV System with Battery for Single F...
This document presents a parametric study of a grid-connected photovoltaic (PV) system with battery storage for a single-family house in India. The study uses PVsyst software to simulate the system located in Karad, Maharashtra. Load estimation for the house calculates total daily electricity demand to be approximately 1 kW or 850 Wh per day. The validation involves simulating the PV system configuration, determining system losses and outputs, and assessing economic feasibility for power generation at the selected location.
IRJET - Review on Ideal Microgrid for Indian Farmers
This document reviews an ideal solar microgrid system for Indian farmers. It proposes a system consisting of PV panels, maximum power point tracking (MPPT), a three-phase inverter, and battery storage. It analyzes different techniques for MPPT, inverter control schemes, and battery energy storage. Perturb and observe and incremental conductance are discussed as MPPT algorithms, and single-stage, dual-stage, and microinverters are reviewed as inverter topologies. The system aims to provide farmers with electricity for their needs while allowing excess to be sold back to the grid as a new source of income.
Matlab based comparative studies on selected mppt
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
IRJET- An Energy Conservation Scheme based on Tariff Moderation
This document discusses an energy conservation scheme based on tariff modification for domestic users. It proposes a new tariff rate structure that provides incentives for low consumption and penalties for high consumption. This aims to motivate consumers to reduce energy usage without causing losses for electric utilities. The existing structure provides 100 free units, which does not encourage conservation and causes losses. The proposed system calculates bills based on consumed units and compares to averages to determine incentives or penalties. The goal is to reduce residential energy usage through this modified tariff approach.
Predicting Product Ad Campaign Performance: A Data Analysis Project Presentation
Predicting Product Ad Campaign Performance: A Data Analysis Project PresentationBoston Institute of Analytics
Explore our comprehensive data analysis project presentation on predicting product ad campaign performance. Learn how data-driven insights can optimize your marketing strategies and enhance campaign effectiveness. Perfect for professionals and students looking to understand the power of data analysis in advertising. for more details visit: https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/Demystifying Salaries: A Data Science Approach to Predicting Salary Ranges
Demystifying Salaries: A Data Science Approach to Predicting Salary RangesBoston Institute of Analytics
This presentation dives into the world of data science and explores its application in predicting salary ranges. We'll uncover the secrets hidden within data sets, unveil the power of machine learning algorithms, and shed light on factors that influence salaries in today's job market.
Visit for more https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/More Related Content
Similar to Solar production with K means clustering
Solar Energy Output Forecasting from SolarGIS Data for Connected Grid Station
Using random forest regression method, daily mean solar output generation
can yield promising result rather
than conventional NWP model
for
forecasting. Using that in practice also the goal was to create a user-friendly
application , with easy access, to provide accurate forecasting regarding
saving and conservation. This is the final report for my master thesis project for M.Sc.
Forecasting Solar Power by LSTM & DBN Techniques using ML
This document discusses using machine learning techniques like Long Short-Term Memory (LSTM) and Deep Belief Networks (DBN) to forecast solar power generation. It analyzes pure datasets on solar panel output, weather, and air pollution to extract features. An Autoencoder-LSTM model is proposed that uses the autoencoder for feature learning and LSTM to incorporate temporal data. The model is trained on extracted features and forecasts are compared to actual data to evaluate performance. Accurate solar power forecasting can improve energy grid stability and reduce operational costs.
Grid Integration and Application of Solar Energy; A Technological Review
This document provides a review of technologies for integrating solar energy conversion systems into the main electric grid. It discusses challenges of the intermittent nature of solar energy and various technological solutions to address issues like power quality, synchronization, and power monitoring. Key points covered include the types of single-stage and dual-stage grid-tied solar energy systems, the role of inverters in performing functions like reactive power compensation and harmonics mitigation, and forecasting methods used to predict solar power generation. The document also reviews various research works on controlling and managing the real and reactive power from solar systems while maintaining power quality standards when connected to the grid.
REVIEW ON SOLAR ENERGY RESOURCES AND PV SYSTEM
This document provides a literature review of 15 sources on solar energy resources and photovoltaic (PV) systems. It discusses India's plans to increase use of solar energy to reduce reliance on conventional power and promote renewable energy. The sources covered examine topics like solar energy harvesting technologies, bibliometric analysis of solar research, improvements in solar cell efficiency, sizing solar panels and batteries, awareness of solar energy in Nigeria, factors affecting the price of solar modules, electricity generation from solar energy, a case study of solar PV systems in Nigeria, using wind and solar to reduce electricity deficits in India, designing solar trees for homes, installing solar energy in Nigeria, and sustaining solar energy production in coastal regions.
DataScienceForRenewableEnergy.pptx
This document provides an overview of how data science can be applied to renewable energy. It discusses how renewable energy data like weather data, power output data, and grid data can be analyzed using predictive modeling, time series analysis, and machine learning to forecast energy generation and optimize systems. Challenges like data quality, integration of different data sources, and uncertainty are addressed. Optimization techniques can be used to determine optimal resource allocation and grid planning to integrate renewable energy. Data-driven insights from performance monitoring and predictive maintenance can improve renewable energy efficiency. Future trends include advancement in machine learning, integration of IoT technologies, and use of big data analytics.
System efficiency prediction of a 1kW capacity grid-tied photovoltaic inverter
System efficiency prediction of a 1kW capacity grid-tied photovoltaic inverterInternational Journal of Power Electronics and Drive Systems
This article presents the system design and prediction performance of a 1kW capacity grid-tied photovoltaic inverter applicable for low or medium-voltage electrical distri-bution networks. System parameters, for instance, the longitude and latitude of the solar plant location, panel orientation, tilt and azimuth angle calculation, feasibility testing, optimal sizing of installment are analyzed in the model and the utility is sim-ulated precisely to construct an efficient solar power plant for residential applications. In this paper, meteorological data are computed to discuss the impact of environmen-tal variables. As regards ensuring reliability and sustenance, a simulation model of the system of interest is tested in the PVsyst software package. Simulation results yield that the optimum energy injected to the national grid from the solar plant, specific pro-duction, and performance ratio are 1676kWh/year, 1552kWh/kWp/year, and 79.29% respectively. Moreover, the predicted carbon footprint reduction is 23.467 tons during the 30 years lifetime of the system. Therefore, the performance assessments affirm the effectiveness of the proposed research.Efficient Energy Management System with Solar Energy
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
report 2
This document discusses the design and analysis of a rooftop solar photovoltaic plant for six buildings on a university campus. It involves using software tools like PV Watts and PvSyst to design the solar systems and calculate expected output. Key aspects covered include panel selection and arrangement, economic considerations, system losses, and layout designs for each building. The goals are to meet part of the energy demand for the buildings and reduce the campus' carbon footprint in line with its sustainability plan.
mehtodalgy.docx
The document discusses using machine learning techniques to predict power factor variations in an electrical power system of a cement plant factory. It aims to replace existing real-time monitoring techniques, which are costly, with machine learning models to predict power factor. This can help reduce errors, maintenance costs, and improve system reliability in a more cost-effective way. The document also reviews various literature on load forecasting and power demand prediction using techniques like neural networks and deep learning.
thotakura2020.pdf
This document summarizes a case study on the operational performance of a 1 megawatt rooftop solar photovoltaic plant in India. The study monitored the plant's performance over 12 months and compared the real energy outputs to simulations from three tools: PVGIS, PV Watts, and PV Syst. On average, PVGIS predictions were most accurate with a 5.33% mean bias error, followed by PV Watts at 12.33% and PV Syst at 30.64% error compared to actual outputs. While simulations provided estimated performance, real-world monitoring showed deviations from predictions and is important for assessing solar projects.
Control for Grid Connected and Intentional Islanding of Distributed Power Gen...
As the demand for more reliable and secure power system with greater power quality increases, the concept of distributed generation DG have become more popular. This popularity of DG concept has developed simultaneously with the decrease in manufacturing costs associated with clean and alternative technologies like fuel cells, biomass, micro turbine and solar cell systems. Intentional islanding is the purposeful sectionalisation of the utility system during widespread disturbances to create power “islandâ€. This island can be designed to maintain a continuous supply of power during disturbances of the main distribution system. Ruchali Borkute | Nikita Malwar ""Control for Grid Connected and Intentional Islanding of Distributed Power Generation"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23679.pdf
Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23679/control-for-grid-connected-and-intentional-islanding-of-distributed-power-generation/ruchali-borkute
IRJET-System Analysis and Optimization of Photovoltaic –Wind Hybrid System: R...
This document reviews the use of artificial intelligence techniques to optimize photovoltaic-wind hybrid energy systems. It discusses various modeling approaches for system components like solar panels, wind turbines, batteries and loads. Traditional optimization methods like iterative, graphical and linear programming techniques are compared to newer artificial intelligence approaches like particle swarm optimization and genetic algorithms. The review concludes that artificial intelligence methods provide more accurate and faster optimization of hybrid systems compared to traditional techniques.
Performance analysis of grid-tied photovoltaic system under varying weather c...
Model and simulation of the impact of the distribution grid-tied photovoltaic (PV) system feeding a variable load with its control system have been investigated in this study. Incremental Conductance (IncCond) algorithm based on maximum power point tracking (MPPT) was implemented for the PV system to extract maximum power under different weather conditions when solar irradiation varies between 250 W/m 2 and 1000 W/m 2 . The proposed system is modelled and simulated with MATLAB/Simulink tools. Under different weather conditions, the dynamic performance of the PV system is evaluated. The results obtained show the efficacy of the proposed MPPT method in response to rapid daytime weather variations. The results also show that the surplus power generated is injected into the grid when the injected power from the PV system is higher than the load demand; otherwise, the grid supplies the load.
Techno_Economic_Analysis_of_Solar_Hybrid_System_for_Residential_Sector.pdf
This document analyzes the technical and economic performance of grid-connected solar photovoltaic systems with battery storage for residential consumers in India. Load profiles of two consumers with identical solar capacity but different usage patterns are examined. Resizing the battery storage to 6 hours of backup reduces grid dependency and lowers electricity bills, especially during peak pricing hours. While the levelized cost of energy is the same for both consumers, the payback period differs due to varying annual savings from load patterns and time-of-day electricity pricing. Increasing battery storage capacity and reducing payback times can encourage more residential consumers to adopt solar energy to meet their needs.
Study of Grid Integrated SPV System
The document summarizes a study of an optimal grid-integrated solar PV system. A hybrid system was modeled using HOMER software to integrate a 25 kWp solar PV array with the existing electrical grid. Simulation results found the system could meet the local load of 69 kWh/day while selling excess solar energy to the grid. The optimal system achieved 79% renewable energy penetration and a net annual energy export of 17,505 kWh to the grid. The study contributes to the design and optimization of grid-connected solar PV systems.
Data Analysis for Solar Energy Generation in a University Microgrid
This paper presents a data acquisition process for solar energy generation and then analyzes the dynamics of its data stream, mainly employing open software solutions such as Python, MySQL, and R. For the sequence of hourly power generations during the period from January 2016 to March 2017, a variety of queries are issued to obtain the number of valid reports as well as the average, maximum, and total amount of electricity generation in 7 solar panels. The query result on all-time, monthly, and daily basis has found that the panel-by-panel difference is not so significant in a university-scale microgrid, the maximum gap being 7.1% even in the exceptional case. In addition, for the time series of daily energy generations, we develop a neural network-based trace and prediction model. Due to the time lagging effect in forecasting, the average prediction error for the next hours or days reaches 27.6%. The data stream is still being accumulated and the accuracy will be enhanced by more intensive machine learning.
IRJET- Parametric Study of Grid Connected PV System with Battery for Single F...
This document presents a parametric study of a grid-connected photovoltaic (PV) system with battery storage for a single-family house in India. The study uses PVsyst software to simulate the system located in Karad, Maharashtra. Load estimation for the house calculates total daily electricity demand to be approximately 1 kW or 850 Wh per day. The validation involves simulating the PV system configuration, determining system losses and outputs, and assessing economic feasibility for power generation at the selected location.
IRJET - Review on Ideal Microgrid for Indian Farmers
This document reviews an ideal solar microgrid system for Indian farmers. It proposes a system consisting of PV panels, maximum power point tracking (MPPT), a three-phase inverter, and battery storage. It analyzes different techniques for MPPT, inverter control schemes, and battery energy storage. Perturb and observe and incremental conductance are discussed as MPPT algorithms, and single-stage, dual-stage, and microinverters are reviewed as inverter topologies. The system aims to provide farmers with electricity for their needs while allowing excess to be sold back to the grid as a new source of income.
Matlab based comparative studies on selected mppt
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
IRJET- An Energy Conservation Scheme based on Tariff Moderation
This document discusses an energy conservation scheme based on tariff modification for domestic users. It proposes a new tariff rate structure that provides incentives for low consumption and penalties for high consumption. This aims to motivate consumers to reduce energy usage without causing losses for electric utilities. The existing structure provides 100 free units, which does not encourage conservation and causes losses. The proposed system calculates bills based on consumed units and compares to averages to determine incentives or penalties. The goal is to reduce residential energy usage through this modified tariff approach.
Similar to Solar production with K means clustering (20)
Solar Energy Output Forecasting from SolarGIS Data for Connected Grid Station
Solar Energy Output Forecasting from SolarGIS Data for Connected Grid Station
Forecasting Solar Power by LSTM & DBN Techniques using ML
Forecasting Solar Power by LSTM & DBN Techniques using ML
Grid Integration and Application of Solar Energy; A Technological Review
Grid Integration and Application of Solar Energy; A Technological Review
System efficiency prediction of a 1kW capacity grid-tied photovoltaic inverter
System efficiency prediction of a 1kW capacity grid-tied photovoltaic inverter
Efficient Energy Management System with Solar Energy
Efficient Energy Management System with Solar Energy
Control for Grid Connected and Intentional Islanding of Distributed Power Gen...
Control for Grid Connected and Intentional Islanding of Distributed Power Gen...
IRJET-System Analysis and Optimization of Photovoltaic –Wind Hybrid System: R...
IRJET-System Analysis and Optimization of Photovoltaic –Wind Hybrid System: R...
Performance analysis of grid-tied photovoltaic system under varying weather c...
Performance analysis of grid-tied photovoltaic system under varying weather c...
Techno_Economic_Analysis_of_Solar_Hybrid_System_for_Residential_Sector.pdf
Techno_Economic_Analysis_of_Solar_Hybrid_System_for_Residential_Sector.pdf
Data Analysis for Solar Energy Generation in a University Microgrid
Data Analysis for Solar Energy Generation in a University Microgrid
IRJET- Parametric Study of Grid Connected PV System with Battery for Single F...
IRJET- Parametric Study of Grid Connected PV System with Battery for Single F...
IRJET - Review on Ideal Microgrid for Indian Farmers
IRJET - Review on Ideal Microgrid for Indian Farmers
IRJET- An Energy Conservation Scheme based on Tariff Moderation
IRJET- An Energy Conservation Scheme based on Tariff Moderation
More from Boston Institute of Analytics
Predicting Product Ad Campaign Performance: A Data Analysis Project Presentation
Predicting Product Ad Campaign Performance: A Data Analysis Project PresentationBoston Institute of Analytics
Explore our comprehensive data analysis project presentation on predicting product ad campaign performance. Learn how data-driven insights can optimize your marketing strategies and enhance campaign effectiveness. Perfect for professionals and students looking to understand the power of data analysis in advertising. for more details visit: https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/Demystifying Salaries: A Data Science Approach to Predicting Salary Ranges
Demystifying Salaries: A Data Science Approach to Predicting Salary RangesBoston Institute of Analytics
This presentation dives into the world of data science and explores its application in predicting salary ranges. We'll uncover the secrets hidden within data sets, unveil the power of machine learning algorithms, and shed light on factors that influence salaries in today's job market.
Visit for more https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/Machine Learning for Accident Severity Prediction
This presentation explores the potential of machine learning in predicting the severity of road accidents. We will delve into the data analysis process, the chosen machine learning algorithms, and the evaluation of our model's performance. This project aims to contribute to improved emergency response times and accident prevention strategies. visit for more: https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/
Predicting Power Consumption for a Greener Tomorrow: Machine Learning Project...
Predicting Power Consumption for a Greener Tomorrow: Machine Learning Project...Boston Institute of Analytics
Explore how our student team leveraged data science to forecast power consumption, empowering smarter energy management and sustainability initiatives. visit for more: https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/Credit Card Fraud Detection: Safeguarding Transactions in the Digital Age
Credit Card Fraud Detection: Safeguarding Transactions in the Digital AgeBoston Institute of Analytics
In today's digital world, credit card fraud is a growing concern. This project explores machine learning techniques for credit card fraud detection. We delve into building models that can identify suspicious transactions in real-time, protecting both consumers and financial institutions. for more detection and machine learning algorithm explore data science and analysis course: https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/Sensing the Future: Anomaly Detection and Event Prediction in Sensor Networks
Sensing the Future: Anomaly Detection and Event Prediction in Sensor NetworksBoston Institute of Analytics
Delve into the realm of sensor networks and uncover the sophisticated techniques employed for anomaly detection and event prediction. From statistical analysis to machine learning algorithms, explore how these technologies empower proactive decision-making in various domains, including industrial monitoring, environmental sensing, and healthcare systems. To learn more about detection and other techniques visit: https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/Predictive Precipitation: Advanced Rain Forecasting Techniques
Explore the cutting-edge methods and technologies utilized in rain forecasting, from traditional meteorological models to machine learning algorithms. Discover how these predictive tools enable accurate anticipation of rainfall patterns, aiding in disaster preparedness, agriculture planning, and urban infrastructure management. To learn in detail about analysis and prediction visit: https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/
Unveiling the Market: Predicting House Prices with Data Science
Ever wondered what factors influence house prices? This project explores the world of house price prediction using data science techniques. We delve into analyzing real estate data to build models that can estimate the value of a home. This can be a valuable tool for both buyers and sellers navigating the housing market. visit https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/ for more details
Beyond Thumbs Up/Down: Using AI to Analyze Movie Reviews
This project explores sentiment analysis, a technique used to understand emotions expressed in text. We delve into the world of movie reviews, applying sentiment analysis techniques to uncover audience sentiment towards various films. This can provide valuable insights for filmmakers, studios, and moviegoers alike. For more analysis and artificial intelligence related content visit: https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/
Unveiling the Patterns: A Cluster Analysis of NYC Shootings
This slideshow dives into a data-driven analysis of NYC shootings. By employing cluster analysis, we uncover hidden patterns within these incidents, providing insights that can aid in crime prevention strategies. for more such analysis and management visit : https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/
Enhancing Cybersecurity: An In-depth Analysis of Travelblog.org
Join us for a detailed examination of the cybersecurity posture of Travelblog.org, where we uncover potential vulnerabilities and suggest strategies for improvement. Learn how to protect websites from cyber threats and secure your digital presence by enrolling in our cybersecurity course at Boston Institute of Analytics. https://bostoninstituteofanalytics.org/cyber-security-and-ethical-hacking/
Exploring Web Security Threats: A Practical Study on SQL Injection and CSRF
Exploring Web Security Threats: A Practical Study on SQL Injection and CSRFBoston Institute of Analytics
Description: This presentation offers a deep dive into SQL Injection (SQLi) and Cross-Site Request Forgery (CSRF) vulnerabilities, demonstrating their impact through real-world examples. Join us to learn how to prevent and mitigate these threats, and take the first step towards a career in cybersecurity with our specialized courses at Boston Institute of Analytics. https://bostoninstituteofanalytics.org/cyber-security-and-ethical-hacking/Detecting Credit Card Fraud: A Machine Learning Approach
This project demonstrates a machine learning approach to detecting credit card fraud using advanced algorithms and techniques. The project utilizes a dataset containing various features such as transaction amount, merchant location, time of transaction, and others to build a predictive model. The presentation covers data preprocessing steps, feature engineering techniques, and the selection of machine learning algorithms such as logistic regression or random forest. It also discusses model evaluation metrics and the importance of fraud detection in financial institutions for safeguarding against fraudulent activities. Visit: https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/
Detecting Credit Card Fraud: An AI-driven Approach
This project showcases an AI-driven approach to detecting credit card fraud using machine learning algorithms. The project utilizes a dataset containing transactions with various features such as transaction amount, location, and time. The goal is to build a predictive model that can accurately identify fraudulent transactions and minimize financial losses for banks and customers. The presentation covers data preprocessing techniques, feature engineering, and the application of machine learning algorithms such as logistic regression or random forests. It also discusses model evaluation metrics and the importance of fraud detection in the banking industry. Visit: https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/
Predicting House Prices: A Machine Learning Approach
This project presents a machine learning approach to predicting house prices using a dataset containing various features such as the size of the house, number of bedrooms, location, and others. The project aims to build a predictive model that can accurately estimate the selling price of a house based on its features. The presentation covers data preprocessing steps, feature selection techniques, and the application of machine learning algorithms such as linear regression or decision trees. It also discusses model evaluation metrics and the potential impact of the model on the real estate industry. Visit: https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/
Predicting Loan Approval: A Data Science Project
This project aims to predict whether a loan application will be approved or denied based on various factors such as applicant's income, credit score, loan amount, etc. Using a dataset containing historical loan application data, we employed machine learning algorithms to build a predictive model. The model was trained on features such as applicant's income, credit history, loan amount, loan term, and others. After training the model, we evaluated its performance using metrics like accuracy, precision, recall, and F1 score. The insights from this project can help financial institutions streamline their loan approval process and make informed decisions. Visit for more information: https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/
Decoding Loan Approval with Predictive Modeling in Action Discovering Weaknes...
Decoding Loan Approval with Predictive Modeling in Action Discovering Weaknes...Boston Institute of Analytics
This presentation dives into the detailed analysis of vulnerabilities discovered in the web infrastructure of Aladel.net, highlighting potential security risks and offering insights into strengthening the website's defenses. Learn about the methods used to identify these vulnerabilities and the recommended strategies to mitigate them, ensuring a more secure online presence for Aladel.net for more information explore our ethical hacking course : https://bostoninstituteofanalytics.org/cyber-security-and-ethical-hacking/HTML Injection Attacks: Impact and Mitigation Strategies
This presentation explores the impact of HTML injection attacks on web applications, detailing how attackers exploit vulnerabilities to inject malicious code into web pages. Learn about the potential consequences of such attacks and discover effective mitigation strategies to protect your web applications from HTML injection vulnerabilities. for more information visit https://bostoninstituteofanalytics.org/category/cyber-security-ethical-hacking/
E-Commerce Order PredictionShraddha Kamble.pptx
Delve into the world of e-commerce order prediction and discover how data science is revolutionizing inventory management and customer satisfaction. Learn how predictive analytics can forecast future orders, optimize inventory levels, and enhance the overall shopping experience. Join us as we unravel the complexities of e-commerce forecasting. visit https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/ for more data science insights
NLP Based project presentation: Analyzing Automobile Prices
Explore the factors influencing automobile prices and how data science is used to predict and analyze these prices. Discover the latest trends in the automotive industry and how pricing strategies are evolving. Join us as we uncover the secrets behind car prices. visit https://bostoninstituteofanalytics.org/data-science-and-artificial-intelligence/ for more data science insights
More from Boston Institute of Analytics (20)
Predicting Product Ad Campaign Performance: A Data Analysis Project Presentation
Predicting Product Ad Campaign Performance: A Data Analysis Project Presentation
Demystifying Salaries: A Data Science Approach to Predicting Salary Ranges
Demystifying Salaries: A Data Science Approach to Predicting Salary Ranges
Predicting Power Consumption for a Greener Tomorrow: Machine Learning Project...
Predicting Power Consumption for a Greener Tomorrow: Machine Learning Project...
Credit Card Fraud Detection: Safeguarding Transactions in the Digital Age
Credit Card Fraud Detection: Safeguarding Transactions in the Digital Age
Sensing the Future: Anomaly Detection and Event Prediction in Sensor Networks
Sensing the Future: Anomaly Detection and Event Prediction in Sensor Networks
Predictive Precipitation: Advanced Rain Forecasting Techniques
Predictive Precipitation: Advanced Rain Forecasting Techniques
Unveiling the Market: Predicting House Prices with Data Science
Unveiling the Market: Predicting House Prices with Data Science
Beyond Thumbs Up/Down: Using AI to Analyze Movie Reviews
Beyond Thumbs Up/Down: Using AI to Analyze Movie Reviews
Unveiling the Patterns: A Cluster Analysis of NYC Shootings
Unveiling the Patterns: A Cluster Analysis of NYC Shootings
Enhancing Cybersecurity: An In-depth Analysis of Travelblog.org
Enhancing Cybersecurity: An In-depth Analysis of Travelblog.org
Exploring Web Security Threats: A Practical Study on SQL Injection and CSRF
Exploring Web Security Threats: A Practical Study on SQL Injection and CSRF
Detecting Credit Card Fraud: A Machine Learning Approach
Detecting Credit Card Fraud: A Machine Learning Approach
Detecting Credit Card Fraud: An AI-driven Approach
Detecting Credit Card Fraud: An AI-driven Approach
Predicting House Prices: A Machine Learning Approach
Predicting House Prices: A Machine Learning Approach
Decoding Loan Approval with Predictive Modeling in Action Discovering Weaknes...
Decoding Loan Approval with Predictive Modeling in Action Discovering Weaknes...
HTML Injection Attacks: Impact and Mitigation Strategies
HTML Injection Attacks: Impact and Mitigation Strategies
NLP Based project presentation: Analyzing Automobile Prices
NLP Based project presentation: Analyzing Automobile Prices
Recently uploaded
Global Situational Awareness of A.I. and where its headed
You can see the future first in San Francisco.
Over the past year, the talk of the town has shifted from $10 billion compute clusters to $100 billion clusters to trillion-dollar clusters. Every six months another zero is added to the boardroom plans. Behind the scenes, there’s a fierce scramble to secure every power contract still available for the rest of the decade, every voltage transformer that can possibly be procured. American big business is gearing up to pour trillions of dollars into a long-unseen mobilization of American industrial might. By the end of the decade, American electricity production will have grown tens of percent; from the shale fields of Pennsylvania to the solar farms of Nevada, hundreds of millions of GPUs will hum.
The AGI race has begun. We are building machines that can think and reason. By 2025/26, these machines will outpace college graduates. By the end of the decade, they will be smarter than you or I; we will have superintelligence, in the true sense of the word. Along the way, national security forces not seen in half a century will be un-leashed, and before long, The Project will be on. If we’re lucky, we’ll be in an all-out race with the CCP; if we’re unlucky, an all-out war.
Everyone is now talking about AI, but few have the faintest glimmer of what is about to hit them. Nvidia analysts still think 2024 might be close to the peak. Mainstream pundits are stuck on the wilful blindness of “it’s just predicting the next word”. They see only hype and business-as-usual; at most they entertain another internet-scale technological change.
Before long, the world will wake up. But right now, there are perhaps a few hundred people, most of them in San Francisco and the AI labs, that have situational awareness. Through whatever peculiar forces of fate, I have found myself amongst them. A few years ago, these people were derided as crazy—but they trusted the trendlines, which allowed them to correctly predict the AI advances of the past few years. Whether these people are also right about the next few years remains to be seen. But these are very smart people—the smartest people I have ever met—and they are the ones building this technology. Perhaps they will be an odd footnote in history, or perhaps they will go down in history like Szilard and Oppenheimer and Teller. If they are seeing the future even close to correctly, we are in for a wild ride.
Let me tell you what we see.
一比一原版(Glasgow毕业证书)格拉斯哥大学毕业证如何办理
毕业原版【微信:41543339】【(Glasgow毕业证书)格拉斯哥大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Intelligence supported media monitoring in veterinary medicine
Media monitoring in veterinary medicien
办(uts毕业证书)悉尼科技大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【(uts毕业证书)悉尼科技大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(Chester毕业证书)切斯特大学毕业证如何办理
毕业原版【微信:41543339】【(Chester毕业证书)切斯特大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Coventry毕业证书)考文垂大学毕业证如何办理
毕业原版【微信:41543339】【(Coventry毕业证书)考文垂大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
DSSML24_tspann_CodelessGenerativeAIPipelines
Codeless Generative AI Pipelines
(GenAI with Milvus)
https://ml.dssconf.pl/user.html#!/lecture/DSSML24-041a/rate
Discover the potential of real-time streaming in the context of GenAI as we delve into the intricacies of Apache NiFi and its capabilities. Learn how this tool can significantly simplify the data engineering workflow for GenAI applications, allowing you to focus on the creative aspects rather than the technical complexities. I will guide you through practical examples and use cases, showing the impact of automation on prompt building. From data ingestion to transformation and delivery, witness how Apache NiFi streamlines the entire pipeline, ensuring a smooth and hassle-free experience.
Timothy Spann
https://www.youtube.com/@FLaNK-Stack
https://medium.com/@tspann
https://www.datainmotion.dev/
milvus, unstructured data, vector database, zilliz, cloud, vectors, python, deep learning, generative ai, genai, nifi, kafka, flink, streaming, iot, edge
The Building Blocks of QuestDB, a Time Series Database
Talk Delivered at Valencia Codes Meetup 2024-06.
Traditionally, databases have treated timestamps just as another data type. However, when performing real-time analytics, timestamps should be first class citizens and we need rich time semantics to get the most out of our data. We also need to deal with ever growing datasets while keeping performant, which is as fun as it sounds.
It is no wonder time-series databases are now more popular than ever before. Join me in this session to learn about the internal architecture and building blocks of QuestDB, an open source time-series database designed for speed. We will also review a history of some of the changes we have gone over the past two years to deal with late and unordered data, non-blocking writes, read-replicas, or faster batch ingestion.
State of Artificial intelligence Report 2023
Artificial intelligence (AI) is a multidisciplinary field of science and engineering whose goal is to create intelligent machines.
We believe that AI will be a force multiplier on technological progress in our increasingly digital, data-driven world. This is because everything around us today, ranging from culture to consumer products, is a product of intelligence.
The State of AI Report is now in its sixth year. Consider this report as a compilation of the most interesting things we’ve seen with a goal of triggering an informed conversation about the state of AI and its implication for the future.
We consider the following key dimensions in our report:
Research: Technology breakthroughs and their capabilities.
Industry: Areas of commercial application for AI and its business impact.
Politics: Regulation of AI, its economic implications and the evolving geopolitics of AI.
Safety: Identifying and mitigating catastrophic risks that highly-capable future AI systems could pose to us.
Predictions: What we believe will happen in the next 12 months and a 2022 performance review to keep us honest.
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
The Modern Marketing Reckoner (MMR) is a comprehensive resource packed with POVs from 60+ industry leaders on how AI is transforming the 4 key pillars of marketing – product, place, price and promotions.
University of New South Wales degree offer diploma Transcript
澳洲UNSW毕业证书制作新南威尔士大学假文凭定制Q微168899991做UNSW留信网教留服认证海牙认证改UNSW成绩单GPA做UNSW假学位证假文凭高仿毕业证申请新南威尔士大学University of New South Wales degree offer diploma Transcript
The Ipsos - AI - Monitor 2024 Report.pdf
According to Ipsos AI Monitor's 2024 report, 65% Indians said that products and services using AI have profoundly changed their daily life in the past 3-5 years.
在线办理(英国UCA毕业证书)创意艺术大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(英国UCA毕业证书)创意艺术大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(UO毕业证)渥太华大学毕业证如何办理
UO毕业证录取书【微信95270640】购买（渥太华大学毕业证成绩单硕士学历）Q微信95270640代办UO学历认证留信网伪造渥太华大学学位证书精仿渥太华大学本科/硕士文凭证书补办渥太华大学 diplomaoffer,Transcript购买渥太华大学毕业证成绩单购买UO假毕业证学位证书购买伪造渥太华大学文凭证书学位证书,专业办理雅思、托福成绩单，学生ID卡，在读证明，海外各大学offer录取通知书，毕业证书，成绩单，文凭等材料:1:1完美还原毕业证、offer录取通知书、学生卡等各种在读或毕业材料的防伪工艺（包括 烫金、烫银、钢印、底纹、凹凸版、水印、防伪光标、热敏防伪、文字图案浮雕，激光镭射，紫外荧光，温感光标）学校原版上有的工艺我们一样不会少，不论是老版本还是最新版本，都能保证最高程度还原，力争完美以求让所有同学都能享受到完美的品质服务。
文凭办理流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：微信95270640我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
7完成交易删除客户资料
高精端提供以下服务：
一：渥太华大学渥太华大学毕业证文凭证书全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站可查
四：留信认证留学生信息网站可查
五：与学校颁发的相关证件1:1纸质尺寸制定（定期向各大院校毕业生购买最新版本毕,业证成绩单保证您拿到的是鲁昂大学内部最新版本毕业证成绩单微信95270640）
A.为什么留学生需要操作留信认证?
留信认证全称全国留学生信息服务网认证,隶属于北京中科院。①留信认证门槛条件更低,费用更美丽,并且包过,完单周期短,效率高②留信认证虽然不能去国企,但是一般的公司都没有问题,因为国内很多公司连基本的留学生学历认证都不了解。这对于留学生来说,这就比自己光拿一个证书更有说服力,因为留学学历可以在留信网站上进行查询!
B.为什么我们提供的毕业证成绩单具有使用价值？
查询留服认证是国内鉴别留学生海外学历的唯一途径但认证只是个体行为不是所有留学生都操作所以没有办理认证的留学生的学历在国内也是查询不到的他们也仅仅只有一张文凭。所以这时候我们提供的和学校颁发的一模一样的毕业证成绩单就有了使用价值。只硕大的蛇皮袋手里拎着长铁钩正站在门口朝黑色的屋内张望不好坏人小偷山娃一怔却也灵机一动立马仰起头双手拢在嘴边朝楼上大喊：“爸爸爸——有人找——那人一听朝山娃尴尬地笑笑悻悻地走了山娃立马“嘭的一声将铁门锁死心却咚咚地乱跳当山娃跟父亲说起这事时父亲很吃惊抚摸着山娃的头说还好醒得及时要不家早被人掏空了到时连电视也没得看啰不过父亲还是夸山娃能临危不乱随机应变有胆有谋山娃笑笑说那都是书上学的看童话和小说时多
一比一原版(GWU,GW文凭证书)乔治·华盛顿大学毕业证如何办理
毕业原版【微信:176555708】【(GWU,GW毕业证书)乔治·华盛顿大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UCSF文凭证书)旧金山分校毕业证如何办理
毕业原版【微信:176555708】【(UCSF毕业证书)旧金山分校毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Recently uploaded (20)
Global Situational Awareness of A.I. and where its headed
Global Situational Awareness of A.I. and where its headed
Intelligence supported media monitoring in veterinary medicine
Intelligence supported media monitoring in veterinary medicine
Influence of Marketing Strategy and Market Competition on Business Plan
Influence of Marketing Strategy and Market Competition on Business Plan
A presentation that explain the Power BI Licensing
A presentation that explain the Power BI Licensing
Udemy_2024_Global_Learning_Skills_Trends_Report (1).pdf
Udemy_2024_Global_Learning_Skills_Trends_Report (1).pdf
The Building Blocks of QuestDB, a Time Series Database
The Building Blocks of QuestDB, a Time Series Database
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
University of New South Wales degree offer diploma Transcript
University of New South Wales degree offer diploma Transcript
Solar production with K means clustering
- 1. Solar Production with K-means Clustering - Tejas Bhogam
- 2. Introduction • Solar-based energy is becoming one of the most promising sources for producing power for residential, commercial, and industrial applications. • Energy production based on solar photovoltaic (PV) systems has gained much attention from researchers and practitioners recently due to its desirable characteristics. • However, the main difficulty in solar energy production is the volatility intermittent of photovoltaic system power generation, which is mainly due to weather conditions. • For large-scale solar farms, the power imbalance of the photovoltaic system may cause a significant loss in their economic profit.
- 3. Objective The objective of a solar power generation dataset is to provide comprehensive and structured data that can be used to analyze, model, and optimize the production of electricity from solar energy systems. This dataset typically includes various parameters and measurements that help in understanding the performance and efficiency of solar power installations. 1) Forecasting and Prediction: Developing models to predict future power generation based on historical data, weather patterns, and other relevant factors. 2) Optimization: Identifying ways to maximize power output and improve the overall efficiency of solar power systems. 3) Comparative Studies: Comparing the performance of different solar technologies, configurations, or locations to identify best practices.
- 4. Dataset India is the world's third-largest producer and third-largest consumer of electricity. The national electric grid in India has an installed capacity of 370.106 GW as of 31 March 2020. Renewable power plants, which also include large hydroelectric plants, constitute 35.86% of India's total installed capacity This data has been gathered at two solar power plants in India over a 34-day period. It has two pairs of files - each pair has one power generation dataset and one sensor readings dataset. The power generation datasets are gathered at the inverter level - each inverter has multiple lines of solar panels attached to it. The sensor data is gathered at a plant level – a single array of sensors optimally placed at the plant.
- 5. Analysis
- 6. Checking the Data types
- 7. Checking null values There are no null values except one column i.e. previousYearToDate
- 8. Relationship between Month and Energy consume From the graph, we can say that energy consumption is high in the summer season.
- 10. Distribution of Value Column
- 11. Relationship between Value and YearToDate
- 12. Top 5 countries
- 13. Outliers
- 14. Label Encoding
- 15. K-means Clustering on Country