We have Baumer make DP Transmitters. DP Transmitters are also known as Differential Pressure Transmitters, Pressure Difference Transmitters, PD Transmitters, DP Transmitters
Invt Power 3 phase in/out tower UPS, 10kVA, 15kVA, 20kVA, 30kVA, 40kVA. Popularly used for various applications, such as medical devices, electrical devices demanding steady power, precision devices, and schools, banks, enterprices, etc. All the uninterrupted power supplies are applied 3-level technology, 4 breakers, DC breaker optional if battery packs demanded. Apart 15kVA, all this UPS could equip aditional isolated transformer for better protection.
Contact at clark.guo@invt.com.cn
Jogler Magnetic Level Gauges are a safe, economical way to measure and control liquid levels in any application. They are suitable for high temperature and/or pressure, full vacuum, low-specific gravity liquids, and more. Jogler magnetic gauges can be used with vessels of almost any size and shape and with any process fluid.
The ILT-6000 contains a low profile waveguide that is inserted into a waveguide sleeve isolation well and float assembly. The waveguide sleeve isolates the internal waveguide from the process environment and protects it from excessive process conditions. This provides an additional safety barrier for the operator. The major benefit is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environment
Measure humidity in harsh environments with the best-in-class transmitter you can truly depend on. The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT330 is ideal for applications where stable humidity measurement is essential. With multiple options to choose from, the instrument can be tailored to meet the specific needs of each individual application.
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
Invt Power 3 phase in/out tower UPS, 10kVA, 15kVA, 20kVA, 30kVA, 40kVA. Popularly used for various applications, such as medical devices, electrical devices demanding steady power, precision devices, and schools, banks, enterprices, etc. All the uninterrupted power supplies are applied 3-level technology, 4 breakers, DC breaker optional if battery packs demanded. Apart 15kVA, all this UPS could equip aditional isolated transformer for better protection.
Contact at clark.guo@invt.com.cn
Jogler Magnetic Level Gauges are a safe, economical way to measure and control liquid levels in any application. They are suitable for high temperature and/or pressure, full vacuum, low-specific gravity liquids, and more. Jogler magnetic gauges can be used with vessels of almost any size and shape and with any process fluid.
The ILT-6000 contains a low profile waveguide that is inserted into a waveguide sleeve isolation well and float assembly. The waveguide sleeve isolates the internal waveguide from the process environment and protects it from excessive process conditions. This provides an additional safety barrier for the operator. The major benefit is the transmitter and waveguide can be removed for field checking without interruption or exposure to the process environment
Measure humidity in harsh environments with the best-in-class transmitter you can truly depend on. The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT330 is ideal for applications where stable humidity measurement is essential. With multiple options to choose from, the instrument can be tailored to meet the specific needs of each individual application.
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
Receive information on transformer fault situations with reliable and robust online transmitter. The Vaisala Moisture, Hydrogen and Temperature Transmitter MHT410 for Transformer Oil measures directly from representative transformer oil giving both reliable hydrogen trend as well as fast moisture data.
It is built to last and doesn’t have wearing parts such as membrane, pumps, hoses or batteries. Easy to install, the MHT410 is ready to use within minutes. Continuously monitoring hydrogen and moisture levels with an in-situ probe is the first step in extending the life of a transformer through implementation of predictive maintenance practices leading to lower total cost of ownership.
Ultrasonic Level Indicator are suitable for measuring the Level if fluid in the tank by non contcat method.
The Instrument works on Sound Waves and the out put from the same ( 4 to 20 mA) is given to a Digital Level Indicator.
The instrument is suitable for Foam Free and fumes Free material only.
Types : 2-Wire Ultrasonic Level Transmitter & Self Compensating (3/4 Wire) Ultrasonic Level Transmitter
The salient features and specifications are as follow:
Simple push-button calibration (Accurate)
Output 4-20 mA / 20-4 mA
(Isolated on 4 Wire Model's only)
Built-in temperature compensation
Optional RS232 Or RS485 communications with calibration, diagnostics and data
logging software
PLC compatible
Three or Four Wire Operation
Self Cleaning operation of sensor face
APPLICATIONS
Solids (Models 25 U, 45U & 52U Below)
Solids Range Approx. ½ of liquid
C = Communication 4 for 485 or 2 for 232, Blank = no Communications
XX = Operating Frequency, U = Ultrasonic 400 = AC Power, 300 = DC Power
1.High accuracy, High stability, High anti-interference 2.Imported Silicon Chip, Reference accuracy 0.2 percent of span 3.Four-Digit LED Display 4.Two-wire,4-20mA output, Hart 5.Flameproof housing structure, High anti-interference 6. Digital signal processing,Stable And Reliable 7.Suitable for large-scale data acquisition and automatic
control systems 8.Simple structure, Convenient installation, and low production cost
Electromagnetic Flow Monitor magphant. Switchpoint setting via rotary switch; Local potentiometer setting of fullscale value; Can be set-up before installation. Email: lam.nguyen@vietan-enviro.com HP: 0945 293292
We have Hirlekar make DP Gauges. DP Gauges are also known as PD Gauges, DP Guages, PD Guages, Differential Pressure Gauges, Pressure Differential Gauges.
In industrial application Thermowell is used to install Temperature Sensors, to protect it from higher pressure or, ease in replacement of the Temperature Sensor etc.
We have Block and Bleed type of Manifolds in SS 304 and SS316 construction.
These are normally used for Pressure Switches, Pressure Guages, Pressure Transmitters etc. to isolate the instrument from process and to vent out the blocked air in the process.
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
Receive information on transformer fault situations with reliable and robust online transmitter. The Vaisala Moisture, Hydrogen and Temperature Transmitter MHT410 for Transformer Oil measures directly from representative transformer oil giving both reliable hydrogen trend as well as fast moisture data.
It is built to last and doesn’t have wearing parts such as membrane, pumps, hoses or batteries. Easy to install, the MHT410 is ready to use within minutes. Continuously monitoring hydrogen and moisture levels with an in-situ probe is the first step in extending the life of a transformer through implementation of predictive maintenance practices leading to lower total cost of ownership.
Ultrasonic Level Indicator are suitable for measuring the Level if fluid in the tank by non contcat method.
The Instrument works on Sound Waves and the out put from the same ( 4 to 20 mA) is given to a Digital Level Indicator.
The instrument is suitable for Foam Free and fumes Free material only.
Types : 2-Wire Ultrasonic Level Transmitter & Self Compensating (3/4 Wire) Ultrasonic Level Transmitter
The salient features and specifications are as follow:
Simple push-button calibration (Accurate)
Output 4-20 mA / 20-4 mA
(Isolated on 4 Wire Model's only)
Built-in temperature compensation
Optional RS232 Or RS485 communications with calibration, diagnostics and data
logging software
PLC compatible
Three or Four Wire Operation
Self Cleaning operation of sensor face
APPLICATIONS
Solids (Models 25 U, 45U & 52U Below)
Solids Range Approx. ½ of liquid
C = Communication 4 for 485 or 2 for 232, Blank = no Communications
XX = Operating Frequency, U = Ultrasonic 400 = AC Power, 300 = DC Power
1.High accuracy, High stability, High anti-interference 2.Imported Silicon Chip, Reference accuracy 0.2 percent of span 3.Four-Digit LED Display 4.Two-wire,4-20mA output, Hart 5.Flameproof housing structure, High anti-interference 6. Digital signal processing,Stable And Reliable 7.Suitable for large-scale data acquisition and automatic
control systems 8.Simple structure, Convenient installation, and low production cost
Electromagnetic Flow Monitor magphant. Switchpoint setting via rotary switch; Local potentiometer setting of fullscale value; Can be set-up before installation. Email: lam.nguyen@vietan-enviro.com HP: 0945 293292
We have Hirlekar make DP Gauges. DP Gauges are also known as PD Gauges, DP Guages, PD Guages, Differential Pressure Gauges, Pressure Differential Gauges.
In industrial application Thermowell is used to install Temperature Sensors, to protect it from higher pressure or, ease in replacement of the Temperature Sensor etc.
We have Block and Bleed type of Manifolds in SS 304 and SS316 construction.
These are normally used for Pressure Switches, Pressure Guages, Pressure Transmitters etc. to isolate the instrument from process and to vent out the blocked air in the process.
We have Orion brand DP Switches. The DP Switches are also known as PD Switches. Differential Pressure Switches & Pressure Difference Switches. Diaphragm type DP Switches are used in industrial applications to control DP across - Filters, Strainers, Pumps, Heat Exchanges etc.
We have various types of five valve manifolds, in SS 304 and SS316 construction. T type, R type and H type Five Valve manifolds are normally available exstock with us
Various Manifolds are necessary during the maintenance of the instruments like Pressure Gauges - Switches & Transmitters, DP Gauges - Switches and Transmitters.
We have various types of Two Valve Manifolds in CS, SS316, Monel 400, Hastelloy C material.
Type of Two Valve Manifolds are R type, T type and H type..
Mounting Bracket also can be provided for the manifolds.
In industrial application Thermowell is used to install Temperature Sensors, to protect it from higher pressure or, ease in replacement of the Temperature Sensor etc.
Various Manifolds are necessary during the maintenance of the instruments like Pressure Gauges - Switches & Transmitters, DP Gauges - Switches and Transmitters.
We have various types of Three Valve Manifolds in SS 316, CS, Monel 400 and Hestelloy C material.
Type of Three Valve Manifolds are R type, T type and H type.
Mounting Bracket also can be provided for the manifolds.
Varies Ranges : from 0 to 150 mm Wc up to 0 to 600 Bar
Differential (Dead Band) : Fixed (Within 10% of set value)
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : one no. or, two nos.
Type of Switches : Micro Switches - SPDT
Sensing Element : Diaphragm (PTFE or Neoprene or SS 316) or Piston
Enclosure : Dustproof IP 40, Weatherproof to IP 54 / IP 65 / IP 66, Flameproof
Adjustable Range : 760 to 100 mm Hg Vacuum
Enclosure : IP 54, IP 65, IP 66 & Flameproof
Pressure Housing : Aluminium, Brass or, SS 316
Diaphragm : Neoprene, Teflon or, SS 316
Differential : Adjustable from 100 to 500 mm Hg
Max. Working Pressure : 12 bar
Switch type : 1 no. SPDT snap action micro switch
Switch rating : 5A, 250V AC Or, 0.2A, 250 V DC
Cable Gland : 3/8” Cable Entry
Calibration Scale : Optional
Pressure Port : 1/4” BSP (F)
Repeatability : 1% FSR
Features:
Self Adjusting Tracking Radar Programmable (recommended) and Simple push-button calibration Output 4-20 mA/ 20-4mA (Isolated on 4 Wire Model's only ) Optional RS232 OR RS485 For communications with calibration diagnostics & data logging software PL Compatible (Modbus RTU) Three or four Wire Operation
Application:
1) Food and Beverages Water / Wastewater Chemicals with vapors
2) Solids with Dust Powder
Mechanical:
Conduit Entry : 1/2" NPT x 2
Enclosure : Aluminum or S.S-94V0
Ingress Protection : NEMA4 (IP65)Type 4/4X
Environmental:
Temperature : -40to 140 F (-40 to 60 C)
Approvals : FCC Part 15 - Low communication device
Installation category: class II
Process:
Temperature PP Rod : - 40 to 176 F (-40 to 80 c)
De-coupler & PTFE Rod - 40 to 350 F(-40 to 177 c)
Material Dielectric : Er >2
Max. Pressure : 5 bar (without De-coupler)
For very dusty applications divide max. range by two.
Various Manifolds are necessary during the maintenance of the instruments like Pressure Gauges - Switches & Transmitters, DP Gauges - Switches and Transmitters.
We have various types of Three Valve Manifolds in SS 316, CS, Monel 400 and Hestelloy C material.
Type of Three Valve Manifolds are R type, T type and H type.
Mounting Bracket also can be provided for the manifolds.
Flameproof Pressure Switches are designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates
Various Ranges : from 0 to 150 mm Wc upto 0 to 400 Bar
Differential (Dead Band) : Fixed (Within 10% of set value) Or, Adjustable
Sensing Element : Diaphragm (PTFE, Neoprene or, SS 316) or Piston
Enclosure : Flameproof to group IIC
We have now introduced a new type of primary flow sensor & smart flow transmitter in their electromagnetic flow meter series. This sensor works on Faraday’s law of electromagnetic induction. The meter is a true volume measuring meter. The measurement is independent of Viscosity, Density, Dissolved/Un-dissolved solids, pressure, or temperature of the flowing liquid as long as it maintains certain minimum conductivity.
This flow meter is field configurable and hence it is easier to change the range on the field.
In many of the Pharma and beverages industries, DM or, WFI water is used where pH has to be monitored and output also would be required for remote Indication or, Control. In Effluent and Sewage treatment also pH has to be maintained after its processing.
We provide online pH Electrode with panel mounted Digital pH Indicator with 4 to 20 mA output.
Details of Electrode :
Type of Electrode : Glass Tube type Electrode
Process Connections : 3/8” BSP (M)
Electrode Holder : PP, PTFE or, SS
Electrode Holder Mounting : ¾” BSP (M)
Range : 0 to 14 pH
Resolution : 0.1
Max. Temperature : Electrode with PP Socket up to 60 degree C
Electrode with PTFE Socket up to 100 degree C
Electrode with SS Socket up to 120 degree C
Max. Pressure : 6 bar
Electrical connection : One meter cable with BNC connector
Approx. Length of the assembly : 120 mm
Details of Digital Indicating Transmitter :
Mounting : Panel mounted
Power Supply : 230 V AC
Display : 4 digit, 7 segment LED display
Dimensions : 96 X 96 X 110 mm
Output : Temperature compensated 4 to 20 mA and 1 no. 5 A, 230 V AC
An Electromagnetic flow meter that can handle low conductivity fluidsManasMicrosystems
Full Bore Electromagnetic Flow Meter by Manas Micro called SROAT-1000 virtually approaches the ideal flow meter suitable for a wide range of liquid flow measurements even with very low conductivities. The meter offers no resistance to flow hence the pressure drop is almost negligible. The measurement is based on Faraday’s law of electromagnetic induction, which is independent of viscosity, density, pressure & temperature of the flowing medium. The measurement is not affected by solid impurities, as long as the minimum conductivity of 5µs/cm is available. We even offer a special model that can work with a minimum conductivity of 2µs/cm. It is a true volumetric flow measurement. We offer various materials of construction for meter lining & electrodes to cover the majority of corrosive liquids.
Model approved with Weights and Measurement Certificate and Seal
Excellent Linearity & Accuracy
Typically better than ± 0.5% Pulse or frequency output is also available optionally.
Measurement is independent of any density, viscosity, pressure, temperature, solid impurities, and conductivity variations (> 5µs/cm). A special model is available that can handle conductivity variations >2µs/cm.
Features
The use of pulsed DC magnetization and the auto-zero technique offers excellent long-term zero stability.
The measurement is independent of the velocity profile across the diameter of the pipeline.
Measurement results are independent of density, viscosity, pressure, temperature, solid-impurities, and conductivity variations [above 5 µs / cm].
No additional pressure drop across the meter relieves the process designer while sizing his pumping requirements. It is simple to install, as no special precautions for straight pipe lengths are required.
Compatible with virtually all corrosive and non-corrosive liquids.
The protection class offered IP 68 for the flow sensor, IP 67 for the transmitter.
Reasonable higher ratio of return on investment to investment.
Applications
Effluent Treatment Plants
Sewage Treatment Plants.
Water Supply Schemes.
Steel & Aluminum.
Sugar Industries & Distilleries.
Pulp & Paper
Chemical / Pharmaceutical.
Petrochemicals / Fertilizers.
Food & Drugs.
Vacuum Transmitter senses the Vacuum in the process and gives the output in current or, voltage in proportion to the change in Vacuum.
Indication : without
Output options : 4 to 20 mA, 0 to 10 Vdc, 1 to 5 Vdc or, 0.5 to 4.5 V dc under 5 V dc
Accuracy : +/- 0.25%, 0.5% or, 1% of FS
Enclosure type : IP 65, IP 67, IP 68, Exproof
Zero and Span Adjustment : With or, Without
Process connection options : 1/4" BSP threaded end
Ranges : various ranges from 0 to 760 mm Hg
Max. pressure : Full Vacuum up to 2 bar pressure
Operating Temperature: 0 to 60 degree C
The Brooks® Ar-MiteTM is a reliable, low flow metal tube flowmeter with 316L stainless steel wetted parts. The magnetically coupled indicator provides a highly reliable method of indication. This model is a practical and economical approach to low flow rate indication for high pressure and difficult to handle fluids. Optional accessories include 4-20 mA output, Needle Valve, Flow Controllers and Alarms.
Broil sensotek industries, producer of turbine flow meter with digital display battery operated, turbine flow sensor with pulse output and turbine flow meter with 4 to 20mA output
The Series SG-Sroat of Electromagnetic Flow Meter is particularly designed for the food and drug industries. It is used for the measurement of meal liquid mediums like milk, cream, fruit juices, pharmaceutical liquids, and so on.
It is to be had with a crucial or isolated version of the transmitter. The transmitter may have an integrated or far-flung totalizer display.
Suitable end connections of SMS Union or Tri-clover Clamp are given in keeping with consumer’s necessities.
It uses a certified food-grade PTFE liner and SS316L as wetted parts. Special models are available for mounting on milk tankers. The flow meter model is approved by the Metrological Department of the Central Government and licensed by the Weights and Measures Department of Maharashtra State. It is sealed by the inspector of the Weights and Measures Department.
Features
Full stainless steel construction with PTFE Liner.
The transmitter can have built-in or remote totaliser display.
Available in two types of end connections;SMS or DIN Union and Tri-Clover clamps.
Sizes available from DN25 to DN100.
Lower Sizes on Request.
Highly Accurate and Linear.
Isolated Analog and digital Output.
Applications
Measuring the volumetric flow of general conductive liquids
Suitable for any type of Dairy Fluids like milk, cream, etc,
Suitable for Pharma liquids, juices of various fruits.
Used in chemical, metallurgy, textile, paper, environmental protection, and food industries.
Vibrating fork Level Switches Aqua fork Swift Supplier and Manufacturer in In...NK Instruments Pvt. Ltd.
Vibrating Fork type Level Switches are single point level switches. Vibrating Fork type Level Switches are also known as Tuning Fork Level Switches. The electronics control unit is integral with the sensing probe. Fail safe logic is field selectable.
There ate two type of Vibraing Fork Level Switches - Vibraing Fork for Solids
Vibrating Fork for Low Density material & Liquids
Housing : Cast Aluminium Weatherproof
Mains : : 230 V AC, 110 V AC or, 24 V DC
Output : : 2 set of C/O contacts rated at 5 amps, 230 V AC for resistive loads.
or. PNP NO
Switching Delay: : 2 sec to 20 Sec ( adj.) for probe covered and uncovered (OPTIONAL)
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
We have Diaphragm type Differential Pressure Switches. These gauges are more in demand for DP control applications in HVAC / across Heat Exchangers / across Pumps / across Filters / across Strainers, Level Control applications in pressurized tanks,
Ranges : from 0 to 150 mm WC up to 0 to 7 bar
Differential : Fixed
Accuracy : +/- 1% FS
Temperature Range : -10 to 80 Degree C (for high-temperature use of impulse tube is advisable)
Migration : Impossible
No. of Switches : One or, Two.
Type of Switches : Micro Switches - SPDT, 5 A 250 V AC
Enclosure class : IP 54, IP 65, IP 66 or, Flameproof
Pressure Housing : MS or, SS
Sensing Diaphragm : Neoprene or, Teflon
Process Connection : ¼” BSP-F (Standard)
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
NK Instruments Pvt. Ltd. has 2 SPDT type Pressure Switches also. Those are used when 2 contacts are to be used at a time when switch operates. We have DJ & MJ series switches with Adjustable Stage Differential Switches and MK & DK series switches are available with 2 SPDT Fixed Stage Differential Switches. These switches are available in Weatherproof model IP 54 & IP 65. We also have 2 SPDT Flameproof Pressure Switches.
"NK Instruments Pvt. Ltd. has 2 SPDT type Pressure Switches also. Those are used when 2 contacts are to be used at a time when switch operates. We have DJ & MJ series switches with Adjustable Stage Differential Switches and MK & DK series switches are available with 2 SPDT Fixed Stage Differential Switches. These switches are available in Weatherproof model IP 54 & IP 65. We also have 2 SPDT Flameproof Pressure Switches.
Various Pressure Ranges : from 0 to 1 Bar up to 0 to 400 Bar
Stage Difference (Dead Band between two switches) : Fixed Stage Differential or, Adjustable Stage Differential
Temperature Range : -10 to 80 Degree C (for high temperature use of impulse tube is advisable)
Accuracy : +/- 1% to 2% FS
No. of Switches : Two nos.
Type of Switches : Micro Switches - 2 SPDT (5A 250 V AC or, 0.2 A 250 V DC.)
Sensing Element : Diaphragm (PTFE, Neoprene or, SS 316:L) OR, Piston
Enclosure : Weatherproof (IP 54), Weatherproof (IP 65), Weatherproof (IP 66), Flameproof
Pressure Housing : Aluminium, Brass, SS 316 or, special on request
Process Connection : ¼” BSP (F) or, special on request
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.
General information:
KU series pressure switches are housed in pressed steel
powder coated enclosure and are recommended for
panel mounting or indoor service. The repeat accuracy is
better than +/-1.5 % FSR, Pressure port is 1/4” BSPM
standard.
Features:
Compact
SS316 & Teflon as standard wetted parts
Electrical Rating : 15A, 125/250 VAC
Pressure port : 1/4” BSPM
Range Selection Table
Model + Range Bar (psi)
0.5 - 7.0
(7.25 - 101.50)
1.0 - 15.0
(14.5 - 217.5)
5.0 - 25.0
(72.5 - 362.5)
*Adjustable Differential bar (psi)
1.2 –
Flameproof Pressure Switches are designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates
Various Ranges : from 0 to 150 mm Wc upto 0 to 400 Bar
Differential (Dead Band) : Fixed (Within 10% of set value) Or, Adjustable
Sensing Element : Diaphragm (PTFE, Neoprene or, SS 316) or Piston
Enclosure : Flameproof to group IIC
We have Smart type DP Transmitters with magnetic key. These Smart Differential Pressure Transmitters are available in wide range from Absolute till 1000 bar in IP 67 enclosure. SMART DP Transmitters has LCD display for local indication for measured DP value.
Vibration Switches are used to keep a watch on Vibrations in the industrial application. For excessive Vibrations this switch operates. Vibration is a Safety Switch. We have FFE make Vibration Switches, which works on Acceleration. We have Flameproof Vibration Switches and Weatherproof Vibration Switches. We have Manual reset Vibration Switches and Remote Reset Vibration Switches also.
www.vibrationinstruments.net
Series 3171-MR are Vibration Switches with options as Manual Reset type and Remote Reset type .
Enclosure : Sealed Ingress Protection to IP 67 to BS EN60947-1 or,
Ingress Protection IP 67 to BS 5420
Set level range : 1 to 9g Peak (Horizontal Vibrations)
Contacts : Silver or, Gold
Mounting : Fix to vertical face with Reset Button at bottom.
NOTE : ac solenoids normally continuously rated
dc solenoids intermittent 25% rated i.e. (1 min. ON & 3 mins OFF)
Electrical Reset : Solenoid rating 48 watts maximum intermittent rating
Solenoid voltages 110, 240 ac or 24 dc
Series 3171-MR are Vibration Switches with options as Manual Reset type and Remote Reset type .
Enclosure : Sealed Ingress Protection to IP 67 to BS EN60947-1 or,
Ingress Protection IP 67 to BS 5420
Set level range : 1 to 9g Peak (Horizontal Vibrations)
Contacts : Silver or, Gold
Mounting : Fix to vertical face with Reset Button at bottom.
NOTE : ac solenoids normally continuously rated
dc solenoids intermittent 25% rated i.e. (1 min. ON & 3 mins OFF)
Electrical Reset : Solenoid rating 48 watts maximum intermittent rating
Solenoid voltages 110, 240 ac or 24 dc
Flameproof Vacuum Switch is designed as per IS2148 for Gas Gr. IIC Flameproof - CE Certification and approved by a leading European Lab – “BASEEFA” for ATEX & ICEEX certificates
Adjustable Range : 760 to 100 mm Hg Vacuum
Diaphragm : Teflon or, Neoprene
Pressure Housing MOC : Aluminium, Brass or, SS 316
Varieties of Vacuum Switches are available on the basis of the Enclosure like IP 54, IP 54, IP 65 or, IP 66
Adjustable Range : 760 to 100 mm Hg Vacuum
Diaphragm : Teflon or, Neoprene
Pressure Housing MOC : Aluminium, Brass or, SS 316
Varieties of Vacuum Switches are available on the basis of the Enclosure like IP 54, IP 54, IP 65 or, IP 66
Adjustable Range : 760 to 100 mm Hg Vacuum
Diaphragm : Teflon or, Neoprene
Pressure Housing MOC : Aluminium, Brass or, SS 316
Varieties of Vacuum Switches are available on the basis of the Enclosure like IP 54, IP 54, IP 65 or, IP 66
Adjustable Range : 760 to 100 mm Hg Vacuum
Diaphragm : Teflon or, Neoprene
Pressure Housing MOC : Aluminium, Brass or, SS 316
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
VAT Registration Outlined In UAE: Benefits and Requirementsuae taxgpt
Vat Registration is a legal obligation for businesses meeting the threshold requirement, helping companies avoid fines and ramifications. Contact now!
https://viralsocialtrends.com/vat-registration-outlined-in-uae/
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
Business Valuation Principles for EntrepreneursBen Wann
This insightful presentation is designed to equip entrepreneurs with the essential knowledge and tools needed to accurately value their businesses. Understanding business valuation is crucial for making informed decisions, whether you're seeking investment, planning to sell, or simply want to gauge your company's worth.
1. Page 1 of 3CAT/ELPRT-100SDP-R1
● Capacitance sensor with diaphragm
● Two wire system
● Application flexibility with HART communication
● Range-ability 100:1
● 128X64 COG with backlit
● Non-intrusive magnetic controls
● Separate electronics and connection components
● Rigid construction
SMART DIFFERENTIAL PRESSURE TRANSMITTER
ELPRT-100SDP ELECTRONET
SALIENT FEATURES
DESCRIPTION
Electronet series ELPRT-100SDP are micro-controller based differential pressure transmitters which use capacitive
transducers. It is used to measure the pressure of gases, vapors and liquids used in refineries, petrochemicals, oil & gas,
power, chemical industries, food processing and pharmaceutical industries. It is having wide ranges of pressure with high
accuracy & linearity output in the form of electrical signal 4-20 mA DC with HART communication.
TECHNICAL SPECIFICATIONS
2-wire-system : 4-20 mA with super imposed signal for HART protocol, digital communication
Supply Voltage : 12.5-45 V DC
Signal Range : 3.9 mA-20.8 mA
Output signal
Electrical Protection
Insulation Resistance : > 250 MΩ
Short Circuit Protection : Permanent
Reverse Polarity Protection : Yes
Over Voltage Protection : 50 V
Humidity : 5-98%
Ambient and Operation : -40 to 80 °C (without display), -20 to 70 °C (with display)
Storage : -40 to 80 °C
Ingress Protection : IP 67
Electromagnetic Compatibility (EMC) : Interference immunity and interference emission according to GB/
T1762.2-1998, compliance with 1EC 61000-4-3:1995
Performance
Accuracy : ± 0.075% of URL
Static Pressure Effect : Zero Error : 0.1%/7 MPa
Span Error : 0.2%/7 MPa
Power Supply Effect : Negligible
Vibration Effect : < 0.01% of URL/g @ 200 Hz
Installation Position Effect : Zero shift which can be calibrated out, no span effect
Thermal Effect : ± 0.45%/55 °C
Static Pressure : 30 bar-130 bar
Stability : 0.1% of URL/year
Switch on delay : 5 sec
Cycle time / update time : 0.25 sec
Damping : 0.1 to 30 sec
Response time : 200 ms (without considering electronic damping)
Self stability configuration : 0 to 2%
Filter configured : 0 to 160 μA
Physical Specification
Electrical connections : M20/½” NPT / Others on request
Process connection : ¼” NPT (F) / Others on request
Diaphragm : SS 316/SS 316L / Others on request
Flange : SS 316
Drain / Vent Valve : SS 316
Media wetted O-ring : Viton / Others on request
Electronic housing : Die-cast aluminum/SS 316
Flange screws, identification plate : Carbon steel with zinc coating
Mounting brackets (option) : Carbon steel with zinc coating or with painting
Sight glass : Laminated safety glass
Filling Fluid : Silicon oil
2. Page 2 of 3CAT/ELPRT-100SDP-R1
5.801 psi (0.400 bar) 0.0580 psi (0.0040 bar)
29.007 psi (2.0 bar) 0.290 psi (0.0200 bar)
100 psi (6.895 bar) 1 psi (0.0689 bar)
300 psi (20.684 bar) 3 psi (0.2068 bar)
-29.007 psi (-2.0 bar)
-100 psi (-6.895 bar)
-300 psi (-20.684 bar)
-1000 psi (-68.948 bar) 1000 psi (68.948 bar) 10 psi (0.6894 bar)
Sr.No. Range Code LRL
1.160 psi (0.080 bar) 0.0116 psi (0.0008 bar)-1.160 psi (-0.080 bar)
-5.801 psi (-0.400 bar)
URL Minimum Span
DIMENSIONAL DETAILS
Fig 1 Front View Fig 2 Side View
DP SENSOR
ASSEMBLY
1/4” NPT
PROCESS
CONNECTION
L H
85mm
41mm
54 mm
200mm
110.00
20.8mA mmHg
L H
104mm
HG TIT WP HE EE
N
K
C
–
I
E
R
R
C
E
U
H
IT
P
A
S
L
O
IV
M
E
T
-
A
-IE NVI ES XOLP
15mm
60mm
100mm
50mm
50mm
1/4” NPT (M)
PLUG 1/4” NPT (F)
119mm
130mm
Display Type : Visible range: 32.5 x 22.5mm
Main display: 5-digit
Digit height: 8mm
Additional display: 8-digit 7 segment
Digit height: 5 mm
Bar graph: 50 bar meter with 2% resolution
Display Range : -9.9.9.9.9 to 9.9.9.9.9
Weight : Standard model approx. 3.4 kg
Others
Range Table
0.1885 psi (-0.013bar) 0.1885 psi (0.013 bar)-0.1885 psi (-0.013bar)1
2
3
4
5
6
7
04
03
05
06
01
02
07
3. NK Instruments Pvt. Ltd.B-501/504, 5th floor, Raunak Arcade, Near THC Hospital, Gokhale Road, Naupada,
Thane(W) 400602. Maharashtra INDIA Telefax Nos.: 91-22-25301330 / 31 / 32
E-Mail: sales@nkinstruments.com Web: http://www.nkinstruments.com
Skype: nitinkelkarskype Gtalk: nkinstruments2006
Authorised Dealer
Page 3 of 3CAT/ELPRT-100SDP-R1
INSTALLATION DRAWING
ORDERING INFORMATION
*Accuracy defined at lab conditions.
*Due to our continuous product revisions, Design, Specifications and Model Number are subject to change without notice.
SERIES
ELPRT-100SDP
Fill Fluid Pressure
Range Code
Wetted
Parts Material
SS 31601
02
1.160 psi
5.801 psi
29.007 psi
100 psi
300 psi
1000 psi
01
02
03
04
05
06
Silicon oil
Inert
01
02
02A B 04 C 01
3.87 (98)3.75 (95) 1.65 (42)
2.62 (67)
4.97
(127)
2.81
(71)
1. Pipe Mounting detail Drawing :
1.65 (42) 3.87 (98)
4.5 (114) 1.40 (36)
Mounting Holes
0.375 Diameter
(10)
3.75 (95)
2.81
(71)
1.40
(36)
1.40
(36)
2. Panel Mounting detail Drawing :
110.00
20.8mA mmHg
L H
110.00
20.8mA mmHg
L H
110.00
20.8mAmmHg
LH
Electrical
Connection
Enclosure
Al-Diecast
SS 316
01
02
M20*1.5F
½ - 14
NPTF
01
02
D 01 E 01
01 01
02 02
03
04
01 01G H
Process
Connection
¼” NPT(F)
½” NPT(F)
¼” BSP(F)
½” BSP(F)
Flange
Material
SS 316
Hast CHast C
01
02
F 01
Mounting
brackets
SS316
CS
*Draft Range available on request (± 200mmWC)