This document provides information on slip, trip, and fall prevention. It discusses relevant legislation, statistics on falls, common hazards, and controls. Specific policies from the Ontario Occupational Health and Safety Act are outlined. Common causes of slips, trips, and falls are identified, such as wet surfaces, spills, weather hazards, and clutter. The document recommends being aware of surroundings, avoiding hazards, using proper equipment like footwear, and reporting issues to supervisors. It emphasizes taking precautions to prevent injuries from falls.
Slips, Trips, and Falls - Workplace Safetycarrollcenter
This document provides information on how to prevent slips, trips, and falls. It discusses common causes of slips such as wet floors or icy conditions. Trips may be caused by damaged steps or objects left on stairways. Falls can result from hazards like broken chairs or unstable ladders. The document recommends wearing appropriate footwear, keeping walkways clear of clutter, cleaning spills immediately, and reporting any unsafe conditions to a supervisor.
Most of us have been walking for the majority of
our lives, but that doesn’t mean we’re good at it.
Slips, trips, and falls are a major cause of injuries!
Slips, trips and falls are the leading cause of injuries and represent a significant portion of claims costs each year. The most common causes of slips, trips and falls are same-level falls, falls on different levels like stairs, and liquid or material spills on walking surfaces. To prevent these incidents, proper housekeeping like cleaning spills immediately, ensuring clear walkways, and wearing appropriate footwear are essential. Workers should also move carefully, watch their surroundings, and report any hazards.
The document outlines employers' and employees' health and safety duties and responsibilities under UK law. It explains that employers must protect employees' health and safety through measures like risk assessments, safety policies, training, and personal protective equipment if needed. Employees must follow safety instructions and report any hazards. Accidents must be reported, and some are legally required to be recorded. The Health and Safety Executive enforces these regulations through inspections and potential penalties.
Three key points from the document:
1. Safety is important to prevent accidents in the workplace caused by negligence, poor training, unsafe equipment or behaviors. Most accidents follow a pattern of lack of management controls, unsafe acts or conditions, and result in losses.
2. Employers and employees have legal duties under health and safety laws to protect workers and others from risks. This includes conducting risk assessments, implementing controls, providing training, and following safe systems of work.
3. Ignoring safety risks and procedures is against the law and can lead to prosecution, fines, injuries or even death for those involved and affected. All workers are responsible for keeping themselves and others safe by raising concerns and following safety rules.
This document discusses preventing slips, trips, and falls in the workplace. It states that slips, trips, and falls account for over 20% of workplace injuries and 10% of fatal workplace injuries. Common causes include wet floors, loose objects, and unsafe behaviors. It provides tips for preventing slips on wet surfaces, preventing trips over loose objects or in poor lighting, and preventing falls from heights or unstable surfaces. The key messages are to stay alert of hazards, wear proper shoes, clean up spills, use equipment safely like ladders, and make safety a habit.
Slips, trips and falls account for almost 20% of workplace injuries. The Occupational Health and Safety Act requires employers to protect workers from hazards and provide training. This document outlines how to recognize and prevent common slip, trip and fall hazards through measures such as keeping work areas tidy, wearing proper footwear, using handrails, and paying attention to surroundings. Slips often involve wet or slippery surfaces while trips are usually caused by obstacles; falls can result from slips or trips and may be prevented through guardrails, covers, and fall protection equipment.
This document discusses hazard identification and controls. It defines hazards and risks, and explains that 96% of accidents are caused by unsafe acts or conditions. It identifies common causes of accidents including improper use of personal protective equipment, unsafe positioning of people, unsafe reactions of people, improper use of tools and equipment, lack of proper procedures, and poor orderliness. The document provides examples of each type of hazard and emphasizes the importance of hazard awareness, identification, and prevention through proper controls. The overall message is that practicing hazard identification and implementing appropriate controls can significantly reduce accidents in the workplace.
Slips, Trips, and Falls - Workplace Safetycarrollcenter
This document provides information on how to prevent slips, trips, and falls. It discusses common causes of slips such as wet floors or icy conditions. Trips may be caused by damaged steps or objects left on stairways. Falls can result from hazards like broken chairs or unstable ladders. The document recommends wearing appropriate footwear, keeping walkways clear of clutter, cleaning spills immediately, and reporting any unsafe conditions to a supervisor.
Most of us have been walking for the majority of
our lives, but that doesn’t mean we’re good at it.
Slips, trips, and falls are a major cause of injuries!
Slips, trips and falls are the leading cause of injuries and represent a significant portion of claims costs each year. The most common causes of slips, trips and falls are same-level falls, falls on different levels like stairs, and liquid or material spills on walking surfaces. To prevent these incidents, proper housekeeping like cleaning spills immediately, ensuring clear walkways, and wearing appropriate footwear are essential. Workers should also move carefully, watch their surroundings, and report any hazards.
The document outlines employers' and employees' health and safety duties and responsibilities under UK law. It explains that employers must protect employees' health and safety through measures like risk assessments, safety policies, training, and personal protective equipment if needed. Employees must follow safety instructions and report any hazards. Accidents must be reported, and some are legally required to be recorded. The Health and Safety Executive enforces these regulations through inspections and potential penalties.
Three key points from the document:
1. Safety is important to prevent accidents in the workplace caused by negligence, poor training, unsafe equipment or behaviors. Most accidents follow a pattern of lack of management controls, unsafe acts or conditions, and result in losses.
2. Employers and employees have legal duties under health and safety laws to protect workers and others from risks. This includes conducting risk assessments, implementing controls, providing training, and following safe systems of work.
3. Ignoring safety risks and procedures is against the law and can lead to prosecution, fines, injuries or even death for those involved and affected. All workers are responsible for keeping themselves and others safe by raising concerns and following safety rules.
This document discusses preventing slips, trips, and falls in the workplace. It states that slips, trips, and falls account for over 20% of workplace injuries and 10% of fatal workplace injuries. Common causes include wet floors, loose objects, and unsafe behaviors. It provides tips for preventing slips on wet surfaces, preventing trips over loose objects or in poor lighting, and preventing falls from heights or unstable surfaces. The key messages are to stay alert of hazards, wear proper shoes, clean up spills, use equipment safely like ladders, and make safety a habit.
Slips, trips and falls account for almost 20% of workplace injuries. The Occupational Health and Safety Act requires employers to protect workers from hazards and provide training. This document outlines how to recognize and prevent common slip, trip and fall hazards through measures such as keeping work areas tidy, wearing proper footwear, using handrails, and paying attention to surroundings. Slips often involve wet or slippery surfaces while trips are usually caused by obstacles; falls can result from slips or trips and may be prevented through guardrails, covers, and fall protection equipment.
This document discusses hazard identification and controls. It defines hazards and risks, and explains that 96% of accidents are caused by unsafe acts or conditions. It identifies common causes of accidents including improper use of personal protective equipment, unsafe positioning of people, unsafe reactions of people, improper use of tools and equipment, lack of proper procedures, and poor orderliness. The document provides examples of each type of hazard and emphasizes the importance of hazard awareness, identification, and prevention through proper controls. The overall message is that practicing hazard identification and implementing appropriate controls can significantly reduce accidents in the workplace.
Accidents can occur anywhere and result from unsafe acts or conditions. Unsafe acts include faulty work habits, careless working, improper handling of materials, and not using proper protective equipment. Unsafe conditions are physical hazards caused by issues like slippery floors, poor housekeeping, unguarded equipment, and lack of safety devices. Hazards are anything that could hurt you or make you sick, such as things that can cut, trip, burn, or crush you, or damage your hearing, eyes, or health. With awareness of hazards and safety precautions, many accidents can be prevented.
Slips, trips and falls account for over 20% of all workplace accidents, second only to motor vehicle accidents. They are a major cause of injuries both at and away from work. According to OSHA and CAL-OSHA studies, slips, trips and falls cause 15-22% of accidents and are one of the leading causes of accidental death for those aged 35-64. Common factors that contribute to slips, trips and falls include uneven surfaces, spills, stairs, obstructions, poor lighting, inappropriate footwear, distractions, and inattention.
This document provides an overview of a basic safety training program. It covers the following key points in 3 sentences or less:
The objectives of the training are to start and complete work safely by developing safe habits and minimizing damage while maximizing safety. It discusses hazards, near misses, accidents, personal protective equipment, causes of accidents including unsafe acts and conditions, and prevention through hazard reporting, risk assessments, and following safety rules. The document provides exercises and content to educate workers on safety concepts, requirements, and best practices to promote a safe work environment.
This document outlines the occupational health and safety induction and procedures for RedPixel Studios. It includes sections on the induction process, current safety procedures, equipment safety checks, safety representatives, existing and potential hazards, controlling risks, hazard reporting, meetings and inspections, emergency procedures, responsibilities, and resources for additional information. The goal is to introduce new employees to workplace safety policies and ensure all staff are aware of hazards and follow proper procedures to minimize risks.
This document discusses common office safety hazards and how to prevent injuries. It covers potential physical, chemical, biological, ergonomic and psychological hazards. Key risks include slips, trips and falls, back injuries from improper lifting or workstation setup, eye strain from screens, cuts and punctures from sharp objects, and electrical hazards. Proper ergonomics, housekeeping, chemical handling, fire safety procedures, and accident reporting are emphasized to create a safe work environment.
Identification of hazard industry and risk assessment NishanPrasad1
The document discusses hazards identification and risk assessment. It defines a hazard as any source of potential harm and provides examples of common hazards like tools, equipment, and the environment. Exposure occurs when one is at risk from a hazard. Various sources of hazards are described like gravity, motion, electrical, chemical, and temperature extremes. The steps of a hazard identification process include hazard identification, risk assessment, analyzing risk controls, implementing controls, and review. Engineering controls aim to eliminate exposure by modifying the hazard source, while personal protective equipment protects employees when exposure cannot be eliminated.
Slips, trips, and falls are a major cause of workplace injuries. They can result from hazards like wet or cluttered floors, poor lighting, or uneven walking surfaces. Common injuries include sprains, strains, fractures and head injuries. Both employees and employers incur costs such as lost work time, medical expenses, and lost productivity. Proper housekeeping, wearing slip-resistant shoes, and following ladder safety procedures can help prevent these incidents. OSHA regulations require that all areas be kept clean, dry, well-lit and free of obstructions to reduce slip, trip and fall risks.
The document discusses workplace health and safety. It defines health, safety, hazards and risks. It outlines different types of hazards including physical, chemical, mechanical, electrical, ergonomic and psychological. Specific physical hazards like noise, vibration, lighting are described. Chemical hazards and ways to improve chemical safety are covered. The roles and responsibilities of employers and employees are mentioned. Engineering, administrative and personal protective controls are summarized as methods to reduce hazards. Common types of personal protective equipment like eye, head, hand and foot protection are outlined.
Working at height remains a major cause of injuries and fatalities. Employers must properly plan work at height, use the right equipment, and provide fall protection training to competent workers. Simple precautions like performing work from ladders safely and avoiding fragile surfaces can reduce risks. Workers should avoid working at unprotected heights whenever possible.
This health and safety induction covers various workplace hazards and safety procedures. It discusses evacuation plans, common accident types, safety signage, hazards like working at heights and with chemicals/electricity. Proper use of ladders, scaffolds, protective equipment and incident reporting are outlined. Manual handling, fire safety and the importance of prevention are also emphasized. The goal is to educate workers and promote a safety-focused culture.
This document outlines various office safety hazards and procedures. It discusses ergonomic issues, slips and falls, fire safety, lighting, storage, furniture safety, lifting techniques, and lockout/tagout procedures for office equipment. Slips, trips and falls are identified as the number one cause of office injuries. Proper posture and ergonomics while sitting are emphasized to avoid strain and injury.
This document provides an overview of office safety training. It identifies potential hazards in an office like injuries, illness, ergonomic issues and accidents. It describes types of hazards like physical, chemical and biological. It provides guidance on safely using office equipment and furniture, handling chemicals, preventing slips/trips/falls and electrical safety. Recommendations include properly arranging computers and workstations, safe storage, good housekeeping and accident/injury reporting procedures. The goal is to create an accident-free work environment and increase safety awareness.
This document provides an overview of health and safety policies and procedures for an organization. It outlines roles and responsibilities, key risks to be aware of, fire evacuation procedures, and what to do in the event of an emergency. Employees and learners are responsible for working safely, reporting any issues, and knowing who to contact for assistance. Managers must ensure safety policies are followed and that staff have the proper training and equipment to perform their roles safely.
This new employee safety orientation covers various workplace safety topics including understanding the employee's role in safety, identifying and reporting hazards, preventing and responding to fires and accidents, evacuation procedures, ergonomics, safe lifting techniques, use of personal protective equipment, electrical and chemical hazards. The goal is to provide employees with the necessary safety information and training to work safely and help maintain an accident-free workplace.
What is a confined space?
Hazards of entering and working in Confined Spaces
Actions to taken / Preparation before entering a confined space
Checklist prior to commencing work in a confined space
Slips, trips, and falls (STFs) are the leading cause of workplace injuries. STFs can result in serious physical and financial costs for both workers and employers, including medical expenses, lost wages, and worker replacement costs. STFs are often preventable and can result from hazards like clutter, distractions, improper carrying of items, and lack of awareness of surroundings. Reducing risks requires awareness of hazards, good housekeeping practices, and reporting of any safety issues.
This PowerPoint presentation provides information about health and safety policies and responsibilities at Bridgwater College. It outlines the overall responsibility of the board of governors, principal, managers, staff, and health and safety manager. It details staff responsibilities and provides information on first aid procedures, fire safety, driving policies, and the college's commitment to safeguarding individuals and promoting health and well-being. The presentation is intended to inform college staff about relevant health and safety practices and policies.
Construction safety pocket guide osha3252zul husni
This document discusses hazards and solutions for various safety issues in the construction industry. It addresses common hazards like falls, trench collapses, scaffolding failures, electrocutions, and more. For each hazard, it provides 2-3 potential solutions, such as using fall protection equipment, properly sloping trenches, inspecting scaffolding, and establishing lockout/tagout procedures for electrical work. The purpose is to educate construction workers about workplace dangers and how to prevent injuries and fatalities through safe practices.
The document discusses confined space entry hazards and safety requirements. It defines a confined space and lists common examples. Hazards include toxic gases, oxygen deficiency, engulfment and isolation. The document outlines procedures for hazard identification, atmospheric monitoring, entry permits, attendant and retrieval systems. It discusses reclassification of confined spaces and respiratory protection program requirements.
Construction is the industry mostly affected during monsoon season. Not only there are work delays but working in rain also cause some additional Health & Safety hazards. Some extra precautions must be taken to minimize the health risk during rainy season and workers should be trained to work during low visibility and slippery conditions.
Slip Trip & fall - Awareness.pptx564654646JamalParole1
This document discusses slip, trip, and fall hazards in the workplace. It defines slips, trips, and falls, and identifies their major causes such as wet or slippery surfaces, uneven walking surfaces, poor lighting, and clutter or obstructions. The document outlines different types of falls including same-level falls and elevated falls. It discusses factors that can increase fall risks, including physical factors, behaviors, and environmental conditions. Finally, the document provides recommendations for fall prevention through workplace design, housekeeping, proper lighting, and safe walking practices.
This document discusses how to prevent slips, trips, and falls in the workplace. Thousands of injuries occur each year due to slips, trips, and falls. Safety regulations and procedures require keeping floors clean and dry, aisles clear of clutter, and safe use of ladders. Workers should maintain clean work areas, use caution on stairs, carefully choose and use ladders, pay attention to their surroundings, learn to fall safely if a fall occurs, and be alert to prevent slips, trips and falls.
Accidents can occur anywhere and result from unsafe acts or conditions. Unsafe acts include faulty work habits, careless working, improper handling of materials, and not using proper protective equipment. Unsafe conditions are physical hazards caused by issues like slippery floors, poor housekeeping, unguarded equipment, and lack of safety devices. Hazards are anything that could hurt you or make you sick, such as things that can cut, trip, burn, or crush you, or damage your hearing, eyes, or health. With awareness of hazards and safety precautions, many accidents can be prevented.
Slips, trips and falls account for over 20% of all workplace accidents, second only to motor vehicle accidents. They are a major cause of injuries both at and away from work. According to OSHA and CAL-OSHA studies, slips, trips and falls cause 15-22% of accidents and are one of the leading causes of accidental death for those aged 35-64. Common factors that contribute to slips, trips and falls include uneven surfaces, spills, stairs, obstructions, poor lighting, inappropriate footwear, distractions, and inattention.
This document provides an overview of a basic safety training program. It covers the following key points in 3 sentences or less:
The objectives of the training are to start and complete work safely by developing safe habits and minimizing damage while maximizing safety. It discusses hazards, near misses, accidents, personal protective equipment, causes of accidents including unsafe acts and conditions, and prevention through hazard reporting, risk assessments, and following safety rules. The document provides exercises and content to educate workers on safety concepts, requirements, and best practices to promote a safe work environment.
This document outlines the occupational health and safety induction and procedures for RedPixel Studios. It includes sections on the induction process, current safety procedures, equipment safety checks, safety representatives, existing and potential hazards, controlling risks, hazard reporting, meetings and inspections, emergency procedures, responsibilities, and resources for additional information. The goal is to introduce new employees to workplace safety policies and ensure all staff are aware of hazards and follow proper procedures to minimize risks.
This document discusses common office safety hazards and how to prevent injuries. It covers potential physical, chemical, biological, ergonomic and psychological hazards. Key risks include slips, trips and falls, back injuries from improper lifting or workstation setup, eye strain from screens, cuts and punctures from sharp objects, and electrical hazards. Proper ergonomics, housekeeping, chemical handling, fire safety procedures, and accident reporting are emphasized to create a safe work environment.
Identification of hazard industry and risk assessment NishanPrasad1
The document discusses hazards identification and risk assessment. It defines a hazard as any source of potential harm and provides examples of common hazards like tools, equipment, and the environment. Exposure occurs when one is at risk from a hazard. Various sources of hazards are described like gravity, motion, electrical, chemical, and temperature extremes. The steps of a hazard identification process include hazard identification, risk assessment, analyzing risk controls, implementing controls, and review. Engineering controls aim to eliminate exposure by modifying the hazard source, while personal protective equipment protects employees when exposure cannot be eliminated.
Slips, trips, and falls are a major cause of workplace injuries. They can result from hazards like wet or cluttered floors, poor lighting, or uneven walking surfaces. Common injuries include sprains, strains, fractures and head injuries. Both employees and employers incur costs such as lost work time, medical expenses, and lost productivity. Proper housekeeping, wearing slip-resistant shoes, and following ladder safety procedures can help prevent these incidents. OSHA regulations require that all areas be kept clean, dry, well-lit and free of obstructions to reduce slip, trip and fall risks.
The document discusses workplace health and safety. It defines health, safety, hazards and risks. It outlines different types of hazards including physical, chemical, mechanical, electrical, ergonomic and psychological. Specific physical hazards like noise, vibration, lighting are described. Chemical hazards and ways to improve chemical safety are covered. The roles and responsibilities of employers and employees are mentioned. Engineering, administrative and personal protective controls are summarized as methods to reduce hazards. Common types of personal protective equipment like eye, head, hand and foot protection are outlined.
Working at height remains a major cause of injuries and fatalities. Employers must properly plan work at height, use the right equipment, and provide fall protection training to competent workers. Simple precautions like performing work from ladders safely and avoiding fragile surfaces can reduce risks. Workers should avoid working at unprotected heights whenever possible.
This health and safety induction covers various workplace hazards and safety procedures. It discusses evacuation plans, common accident types, safety signage, hazards like working at heights and with chemicals/electricity. Proper use of ladders, scaffolds, protective equipment and incident reporting are outlined. Manual handling, fire safety and the importance of prevention are also emphasized. The goal is to educate workers and promote a safety-focused culture.
This document outlines various office safety hazards and procedures. It discusses ergonomic issues, slips and falls, fire safety, lighting, storage, furniture safety, lifting techniques, and lockout/tagout procedures for office equipment. Slips, trips and falls are identified as the number one cause of office injuries. Proper posture and ergonomics while sitting are emphasized to avoid strain and injury.
This document provides an overview of office safety training. It identifies potential hazards in an office like injuries, illness, ergonomic issues and accidents. It describes types of hazards like physical, chemical and biological. It provides guidance on safely using office equipment and furniture, handling chemicals, preventing slips/trips/falls and electrical safety. Recommendations include properly arranging computers and workstations, safe storage, good housekeeping and accident/injury reporting procedures. The goal is to create an accident-free work environment and increase safety awareness.
This document provides an overview of health and safety policies and procedures for an organization. It outlines roles and responsibilities, key risks to be aware of, fire evacuation procedures, and what to do in the event of an emergency. Employees and learners are responsible for working safely, reporting any issues, and knowing who to contact for assistance. Managers must ensure safety policies are followed and that staff have the proper training and equipment to perform their roles safely.
This new employee safety orientation covers various workplace safety topics including understanding the employee's role in safety, identifying and reporting hazards, preventing and responding to fires and accidents, evacuation procedures, ergonomics, safe lifting techniques, use of personal protective equipment, electrical and chemical hazards. The goal is to provide employees with the necessary safety information and training to work safely and help maintain an accident-free workplace.
What is a confined space?
Hazards of entering and working in Confined Spaces
Actions to taken / Preparation before entering a confined space
Checklist prior to commencing work in a confined space
Slips, trips, and falls (STFs) are the leading cause of workplace injuries. STFs can result in serious physical and financial costs for both workers and employers, including medical expenses, lost wages, and worker replacement costs. STFs are often preventable and can result from hazards like clutter, distractions, improper carrying of items, and lack of awareness of surroundings. Reducing risks requires awareness of hazards, good housekeeping practices, and reporting of any safety issues.
This PowerPoint presentation provides information about health and safety policies and responsibilities at Bridgwater College. It outlines the overall responsibility of the board of governors, principal, managers, staff, and health and safety manager. It details staff responsibilities and provides information on first aid procedures, fire safety, driving policies, and the college's commitment to safeguarding individuals and promoting health and well-being. The presentation is intended to inform college staff about relevant health and safety practices and policies.
Construction safety pocket guide osha3252zul husni
This document discusses hazards and solutions for various safety issues in the construction industry. It addresses common hazards like falls, trench collapses, scaffolding failures, electrocutions, and more. For each hazard, it provides 2-3 potential solutions, such as using fall protection equipment, properly sloping trenches, inspecting scaffolding, and establishing lockout/tagout procedures for electrical work. The purpose is to educate construction workers about workplace dangers and how to prevent injuries and fatalities through safe practices.
The document discusses confined space entry hazards and safety requirements. It defines a confined space and lists common examples. Hazards include toxic gases, oxygen deficiency, engulfment and isolation. The document outlines procedures for hazard identification, atmospheric monitoring, entry permits, attendant and retrieval systems. It discusses reclassification of confined spaces and respiratory protection program requirements.
Construction is the industry mostly affected during monsoon season. Not only there are work delays but working in rain also cause some additional Health & Safety hazards. Some extra precautions must be taken to minimize the health risk during rainy season and workers should be trained to work during low visibility and slippery conditions.
Slip Trip & fall - Awareness.pptx564654646JamalParole1
This document discusses slip, trip, and fall hazards in the workplace. It defines slips, trips, and falls, and identifies their major causes such as wet or slippery surfaces, uneven walking surfaces, poor lighting, and clutter or obstructions. The document outlines different types of falls including same-level falls and elevated falls. It discusses factors that can increase fall risks, including physical factors, behaviors, and environmental conditions. Finally, the document provides recommendations for fall prevention through workplace design, housekeeping, proper lighting, and safe walking practices.
This document discusses how to prevent slips, trips, and falls in the workplace. Thousands of injuries occur each year due to slips, trips, and falls. Safety regulations and procedures require keeping floors clean and dry, aisles clear of clutter, and safe use of ladders. Workers should maintain clean work areas, use caution on stairs, carefully choose and use ladders, pay attention to their surroundings, learn to fall safely if a fall occurs, and be alert to prevent slips, trips and falls.
Slips, trips and falls can occur when there is insufficient friction between a shoe and surface, when contact is made with an unexpected object, or when balance is lost. Falls are categorized as same-level or from elevation. Hazards can be prevented through measures such as keeping work areas tidy, wearing proper footwear, paying attention to surroundings, and reporting issues.
This document discusses slips, trips, and falls. It defines a slip as occurring due to lack of traction, a trip as stumbling over an object, and a fall as losing balance. Falls can be at the same level or from elevation. Hazards include clutter, cords, spills, and unsafe footwear or work practices. The document provides tips for prevention such as paying attention, wearing proper footwear, keeping work areas tidy, and reporting hazards.
Slips, trips, and falls are common workplace hazards. A slip occurs when there is too little traction, a trip occurs when an object is contacted unexpectedly, and a fall occurs when balance is lost. Falls can be same-level or from elevation. Hazards include cords, clutter, poor lighting, and slippery or uneven surfaces. Proper footwear, good housekeeping, paying attention, reporting issues, and following safety procedures can help prevent slips, trips and falls.
This document discusses slips, trips, and falls, including causes and prevention. It notes that slips, trips, and falls account for most general industry accidents and cause thousands of emergency room visits annually. Causes include unsafe conditions like clutter, spills, poor lighting, and unsafe behaviors like rushing or improper footwear. Prevention involves recognizing hazards, evaluating risks, and implementing controls. Controls include improving housekeeping, lighting, slip-resistant surfaces, training safe behaviors, and using handrails and fall protection equipment. The key messages are that slips, trips and falls are preventable, but it requires vigilance, planning safe work practices, and taking personal responsibility for safety.
Slips, trips, and falls are a major cause of injuries in the workplace and at home. They can result from wet or slippery surfaces, clutter, poor lighting, or uneven walking surfaces. Safety regulations require keeping floors clean and dry, aisles clear of obstructions, and using ladders safely. To prevent injuries from slips, trips, and falls, it is important to clean up spills, remove clutter and cords from walkways, use caution on stairs, choose ladders carefully, wear sturdy shoes, and pay attention to one's surroundings. If a fall occurs, one should roll to absorb the impact and seek medical attention for any injuries.
Slips, trips, and falls represent a large number of preventable accidents within the school district and can result in serious and costly injuries for both employees and the district. They can occur both inside and outside due to hazards like slippery surfaces, clutter, or uneven walking areas. Proper training, awareness, housekeeping, wearing appropriate footwear, and reporting hazards can help reduce the risk of slips, trips and falls.
This document discusses preventing falls, slips, and trips (FSTs) in the workplace. It notes that FSTs accounted for over $5 million in workers' compensation costs in Georgia in 2011 and were the leading cause of injuries. It identifies common causes of FSTs like wet or slippery surfaces, uneven walking areas, clutter, and poor lighting. The document provides guidance on prevention strategies like maintaining good housekeeping, wearing appropriate footwear, fixing hazards, and paying attention while walking. It emphasizes that FSTs can often be prevented through awareness of risks and applying basic safety practices.
This document discusses preventing falls, slips, and trips (FSTs) in the workplace. It notes that FSTs accounted for over $5 million in workers' compensation costs in Georgia in 2011 and were the leading cause of injuries. It identifies common causes of FSTs like wet or slippery surfaces, uneven walking areas, clutter, and poor lighting. The document provides guidance on prevention strategies like maintaining good housekeeping, wearing appropriate footwear, fixing hazards, and paying attention while walking. It emphasizes that FSTs can often be prevented through awareness of risks and applying basic safety practices.
University of California Safety Note toolbox talk on Slip, Trip, & Fall.
Preventing these common incidents in the workplace is important, as falls can cause serious injury and are a leading source of injuries in thr workplace.
Worksafe Fairfax: Reducing Injuries: Slips, Trips and FallsFairfax County
This document provides tips and guidelines for preventing slips, trips, and falls. It addresses hazards that can be encountered both indoors and outdoors and recommends proper safety equipment, cleaning spills, keeping pathways clear, using appropriate ladders, and following handrail guidelines. The document emphasizes reporting any incidents or hazards to supervisors.
The presentation discusses identifying and mitigating slip, trip, and fall hazards to improve safety. It identifies common hazards like clutter, spills, and improper ladder usage. Statistics show slips, trips and falls are a leading cause of workplace injuries. The goals are to understand safety specifications, identify hazards, avoid falls, and eliminate risks through measures like cleaning spills, improving lighting, and proper ladder training. Addressing these issues can help reduce OSHA citations, worker injuries, and legal liability.
Slips, trips, and falls are a major cause of workplace injuries. Proper prevention techniques include good housekeeping to clean spills and remove obstacles, using the right footwear for the environment, and practicing safe behaviors like not running or carrying items that block your view. Employers are responsible for providing a safe work environment, while all employees should take responsibility for working safely, such as using handrails and following ladder safety procedures to avoid falls.
Slips, trips, and falls are a major cause of workplace injuries. Proper prevention techniques include good housekeeping to clean spills and remove obstacles, using the right footwear for the environment, and being aware of behaviors like rushing or distractions that can lead to falls. Fall protection devices should be used for work at heights from ladders, platforms, or other elevated surfaces. Following safety practices and policies can significantly reduce injuries from slips, trips, and falls.
Slips, trips, and falls are a major cause of workplace injuries. Proper prevention techniques include good housekeeping to clean spills and remove obstacles, using the right footwear for the environment, and being aware of behaviors like rushing or distractions that can lead to falls. Fall protection devices should be used for work at heights from ladders, platforms, or other elevated surfaces. Following safety practices and policies can significantly reduce injuries from slips, trips, and falls.
The document discusses slip, trip, and fall hazards in the workplace. It notes that slips, trips and falls are the number one cause of accidental deaths, second only to motor vehicle accidents, and account for 12-15% of workers' compensation costs. There are two types of falls - on the same level and from elevations. Causes include wet or slippery floors, poor lighting, clutter or other hazards left on walkways. The document outlines a four step process to prevent falls: find the hazard, check it out, fix it, and re-evaluate. It provides many examples of hazards and recommendations to implement prevention measures like non-slip coatings, fall protection equipment, and employee training.
This document discusses slip, trip, and fall hazards and provides guidance on prevention. It notes that weather conditions like wet floors or ice can cause slipping. Tripping hazards include damaged steps or misplaced items. Falls can result from broken equipment or climbing on unstable surfaces. The document recommends wearing appropriate footwear, cleaning spills, keeping aisles clear, and reporting any issues to supervisors.
Office safety covers general hazards like slips, trips, falls and ergonomics as well as specific hazards from materials handling, hazardous chemicals, electrical safety, noise and indoor air quality. Common causes of accidents include slip, trip and fall hazards; filing cabinet hazards; poor housekeeping; and horseplay. Proper lifting techniques and material handling aids can prevent injuries. Hazard communication plans are required for offices using certain chemicals. Signs and tags warn of hazards so proper precautions can be taken. Basic electrical safety involves inspecting cords and equipment. Ergonomics aims to arrange workspaces to fit employees' bodies to prevent repetitive strain injuries. Indoor air quality depends on factors like ventilation, mold, and cleaning supplies.
Similar to Slips,Trips,Falls prevention presentation (20)
NVBDCP.pptx Nation vector borne disease control programSapna Thakur
NVBDCP was launched in 2003-2004 . Vector-Borne Disease: Disease that results from an infection transmitted to humans and other animals by blood-feeding arthropods, such as mosquitoes, ticks, and fleas. Examples of vector-borne diseases include Dengue fever, West Nile Virus, Lyme disease, and malaria.
Cell Therapy Expansion and Challenges in Autoimmune DiseaseHealth Advances
There is increasing confidence that cell therapies will soon play a role in the treatment of autoimmune disorders, but the extent of this impact remains to be seen. Early readouts on autologous CAR-Ts in lupus are encouraging, but manufacturing and cost limitations are likely to restrict access to highly refractory patients. Allogeneic CAR-Ts have the potential to broaden access to earlier lines of treatment due to their inherent cost benefits, however they will need to demonstrate comparable or improved efficacy to established modalities.
In addition to infrastructure and capacity constraints, CAR-Ts face a very different risk-benefit dynamic in autoimmune compared to oncology, highlighting the need for tolerable therapies with low adverse event risk. CAR-NK and Treg-based therapies are also being developed in certain autoimmune disorders and may demonstrate favorable safety profiles. Several novel non-cell therapies such as bispecific antibodies, nanobodies, and RNAi drugs, may also offer future alternative competitive solutions with variable value propositions.
Widespread adoption of cell therapies will not only require strong efficacy and safety data, but also adapted pricing and access strategies. At oncology-based price points, CAR-Ts are unlikely to achieve broad market access in autoimmune disorders, with eligible patient populations that are potentially orders of magnitude greater than the number of currently addressable cancer patients. Developers have made strides towards reducing cell therapy COGS while improving manufacturing efficiency, but payors will inevitably restrict access until more sustainable pricing is achieved.
Despite these headwinds, industry leaders and investors remain confident that cell therapies are poised to address significant unmet need in patients suffering from autoimmune disorders. However, the extent of this impact on the treatment landscape remains to be seen, as the industry rapidly approaches an inflection point.
8 Surprising Reasons To Meditate 40 Minutes A Day That Can Change Your Life.pptxHolistified Wellness
We’re talking about Vedic Meditation, a form of meditation that has been around for at least 5,000 years. Back then, the people who lived in the Indus Valley, now known as India and Pakistan, practised meditation as a fundamental part of daily life. This knowledge that has given us yoga and Ayurveda, was known as Veda, hence the name Vedic. And though there are some written records, the practice has been passed down verbally from generation to generation.
These lecture slides, by Dr Sidra Arshad, offer a quick overview of the physiological basis of a normal electrocardiogram.
Learning objectives:
1. Define an electrocardiogram (ECG) and electrocardiography
2. Describe how dipoles generated by the heart produce the waveforms of the ECG
3. Describe the components of a normal electrocardiogram of a typical bipolar lead (limb II)
4. Differentiate between intervals and segments
5. Enlist some common indications for obtaining an ECG
6. Describe the flow of current around the heart during the cardiac cycle
7. Discuss the placement and polarity of the leads of electrocardiograph
8. Describe the normal electrocardiograms recorded from the limb leads and explain the physiological basis of the different records that are obtained
9. Define mean electrical vector (axis) of the heart and give the normal range
10. Define the mean QRS vector
11. Describe the axes of leads (hexagonal reference system)
12. Comprehend the vectorial analysis of the normal ECG
13. Determine the mean electrical axis of the ventricular QRS and appreciate the mean axis deviation
14. Explain the concepts of current of injury, J point, and their significance
Study Resources:
1. Chapter 11, Guyton and Hall Textbook of Medical Physiology, 14th edition
2. Chapter 9, Human Physiology - From Cells to Systems, Lauralee Sherwood, 9th edition
3. Chapter 29, Ganong’s Review of Medical Physiology, 26th edition
4. Electrocardiogram, StatPearls - https://www.ncbi.nlm.nih.gov/books/NBK549803/
5. ECG in Medical Practice by ABM Abdullah, 4th edition
6. Chapter 3, Cardiology Explained, https://www.ncbi.nlm.nih.gov/books/NBK2214/
7. ECG Basics, http://www.nataliescasebook.com/tag/e-c-g-basics
share - Lions, tigers, AI and health misinformation, oh my!.pptxTina Purnat
• Pitfalls and pivots needed to use AI effectively in public health
• Evidence-based strategies to address health misinformation effectively
• Building trust with communities online and offline
• Equipping health professionals to address questions, concerns and health misinformation
• Assessing risk and mitigating harm from adverse health narratives in communities, health workforce and health system
Does Over-Masturbation Contribute to Chronic Prostatitis.pptxwalterHu5
In some case, your chronic prostatitis may be related to over-masturbation. Generally, natural medicine Diuretic and Anti-inflammatory Pill can help mee get a cure.
Integrating Ayurveda into Parkinson’s Management: A Holistic ApproachAyurveda ForAll
Explore the benefits of combining Ayurveda with conventional Parkinson's treatments. Learn how a holistic approach can manage symptoms, enhance well-being, and balance body energies. Discover the steps to safely integrate Ayurvedic practices into your Parkinson’s care plan, including expert guidance on diet, herbal remedies, and lifestyle modifications.
Local Advanced Lung Cancer: Artificial Intelligence, Synergetics, Complex Sys...Oleg Kshivets
Overall life span (LS) was 1671.7±1721.6 days and cumulative 5YS reached 62.4%, 10 years – 50.4%, 20 years – 44.6%. 94 LCP lived more than 5 years without cancer (LS=2958.6±1723.6 days), 22 – more than 10 years (LS=5571±1841.8 days). 67 LCP died because of LC (LS=471.9±344 days). AT significantly improved 5YS (68% vs. 53.7%) (P=0.028 by log-rank test). Cox modeling displayed that 5YS of LCP significantly depended on: N0-N12, T3-4, blood cell circuit, cell ratio factors (ratio between cancer cells-CC and blood cells subpopulations), LC cell dynamics, recalcification time, heparin tolerance, prothrombin index, protein, AT, procedure type (P=0.000-0.031). Neural networks, genetic algorithm selection and bootstrap simulation revealed relationships between 5YS and N0-12 (rank=1), thrombocytes/CC (rank=2), segmented neutrophils/CC (3), eosinophils/CC (4), erythrocytes/CC (5), healthy cells/CC (6), lymphocytes/CC (7), stick neutrophils/CC (8), leucocytes/CC (9), monocytes/CC (10). Correct prediction of 5YS was 100% by neural networks computing (error=0.000; area under ROC curve=1.0).
Promoting Wellbeing - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
TEST BANK For Community Health Nursing A Canadian Perspective, 5th Edition by...Donc Test
TEST BANK For Community Health Nursing A Canadian Perspective, 5th Edition by Stamler, Verified Chapters 1 - 33, Complete Newest Version Community Health Nursing A Canadian Perspective, 5th Edition by Stamler, Verified Chapters 1 - 33, Complete Newest Version Community Health Nursing A Canadian Perspective, 5th Edition by Stamler Community Health Nursing A Canadian Perspective, 5th Edition TEST BANK by Stamler Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Pdf Chapters Download Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Pdf Download Stuvia Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Study Guide Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Ebook Download Stuvia Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Questions and Answers Quizlet Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Studocu Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Quizlet Test Bank For Community Health Nursing A Canadian Perspective, 5th Edition Stuvia Community Health Nursing A Canadian Perspective, 5th Edition Pdf Chapters Download Community Health Nursing A Canadian Perspective, 5th Edition Pdf Download Course Hero Community Health Nursing A Canadian Perspective, 5th Edition Answers Quizlet Community Health Nursing A Canadian Perspective, 5th Edition Ebook Download Course hero Community Health Nursing A Canadian Perspective, 5th Edition Questions and Answers Community Health Nursing A Canadian Perspective, 5th Edition Studocu Community Health Nursing A Canadian Perspective, 5th Edition Quizlet Community Health Nursing A Canadian Perspective, 5th Edition Stuvia Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Pdf Chapters Download Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Pdf Download Stuvia Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Study Guide Questions and Answers Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Ebook Download Stuvia Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Questions Quizlet Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Studocu Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Quizlet Community Health Nursing A Canadian Perspective, 5th Edition Test Bank Stuvia
Here is the updated list of Top Best Ayurvedic medicine for Gas and Indigestion and those are Gas-O-Go Syp for Dyspepsia | Lavizyme Syrup for Acidity | Yumzyme Hepatoprotective Capsules etc
2. Training Objectives - Slips, Trips, &
Falls
Legislation
Statistics
Controls
Hazards
City Policy &
Toolkit
3. Ontario Occupational Health &
Safety Act
• Employers must “take every precaution reasonable in the
circumstances for the protection of a worker”.
[Section 25(2)(h) and 27(2)(c)]
• Regulations for Industrial Establishments (Reg.851):
Section 11 requires floors and other surfaces used by any worker, to
be kept free of obstructions, hazards and accumulations of refuse,
snow, or ice
• Regulations concerning heights:
Guard Rails – Regulation 851 – Sections 13 & 14
Ladders – Regulation 851 – Section 73 (portable ladders)
Fall Protection – Regulation 851 – Section 85
4. Slip, Trip, and Fall Statistics
Did you know?
• Canada-wide, approximately 60,000 workers get injured annually
due to falls, with approximately 17,000 occurring in Ontario.
• One in every 6 lost time injuries in Ontario is caused by a fall
(From the WSIB Prevention Fact Sheet “Slips and Falls”)
• Falls can result in critical injuries such as fractures,
unconsciousness, or even permanent disability or death
• Falls on the same level are more frequent due to the number of
people exposed to those fall hazards. However falls from heights
(beyond 1 foot) can often result in more severe injuries.
5. City of Toronto Statistics
Slips, Trips, Falls
Q - What percentage of lost time injuries to City
employees each year result from slips, trips, and
falls?
A - More than 20% of all lost time injuries to City
employees each year result from slips, trips and
falls. Slips, trips and falls can also cause harm
to members of the public who are clients of City
programs and services.
6. What are some common slip/trip/fall hazards
in your work area, or in the work you perform?
7. How Do Slips, Trips and Falls Happen?How Do Slips, Trips and Falls Happen?
• The majority of falls happen as a result of slips and trips on the
same level due to:
Wet or oily surfaces
Occasional spills
Weather hazards
Loose, unanchored, or wrinkled rugs or mats
Walking surfaces that do not have the same degree of traction in all
areas
Obstructed view, including carrying objects in a way that may
obstruct view
Poor lighting
Clutter in your way
Uncovered cables
Bottom drawers of cabinets not being closed
Uneven (steps, thresholds) walking surfaces
From CCOHS OSH Answers “Prevention of Slips, Trips, and Falls”
8. Some Locations of Reported
Slips/Trips/Falls
The following are some reported locations of incidents. Common
contributing causes include weather (ice/snow/rain), carrying
materials, equipment, or patients while walking, and poor walkway
conditions:
• Walkways, steps, driveways, stairs (both outdoor and indoor) to
or from workplaces, TTC stops/subway, businesses, private
homes, apartment buildings, hospitals, stations
• Parking lots (some City-owned or operated, some not)
• Inside offices - office cubicles, hallways, various floors,
bathrooms, stairs, from chairs, elevators
• Vehicles (when entering or exiting) – slips on ice on the ground
while exiting or entering, slip or fall off steps of vehicles, trip over
equipment in vehicle
9. Slips, Trips, and Falls
Did you know?
• There are things you can do to prevent slips, trips, and falls,
whether you’re working in the office, a station, garage,
warehouse, or out in the community
We must all work together to eliminate slips, trips, and falls.
All workplace parties have a significant
responsibility for occupational
health and safety.
10. What Can You Do To Prevent
Slips, Trips, and Falls?
• Know about the hazards that cause slips, trips, and falls
• Follow any instructions/training provided
• Report hazards and incidents to your supervisor
• Be aware of your surroundings
• Don’t increase the risk by adding additional hazards
• Avoid hazards whenever you can
• Use/wear proper equipment and assistive devices
See the following slides for more information on the above.
11. Knowledge
• Know the slip, trip, fall hazards associated with your work, whether you are
working in an office, or other premises; e.g. station, garage, warehouse, or out
in the community.
• Know that some factors can combine to increase the risk, for
example;
carrying a box or other materials while descending/ascending stairs
carrying equipment or work materials while climbing wet stairs or
walking on a slippery driveway
using electronic devices (cell phone, BlackBerry) while walking or
using stairs
walking on surfaces or climbing stairs in dark conditions
stepping to a lower or higher level that is also icy
wearing improper footwear while walking on a slippery surface
stepping onto a different surface (e.g. from outdoors to indoors) with
snow on your boots
12. Knowledge
• Know evacuation procedures and the location of exits in
advance of an emergency
• Know Your Worker Rights and Responsibilities
13. Follow Instructions
• Follow the prevention information in this presentation and any
additional instructions from your supervisor
• Reduce your own slip, trip, and fall risks as part of your every day
work and home life
• Help your co-workers avoid slip, trip, and fall hazards
You are also responsible for reducing your own
slip, trip, and fall hazards
14. Report
• Report any concerns, or slip, trip, or fall incidents (even those not
requiring lost time or medical attention) to your supervisor
• Report hazards of which you become aware, to help prevent
injuries. Examples can include, but are not limited to;
-poor lighting, stair hazards, defective equipment, loose carpeting or
mats, damaged flooring, spills, unsecured electrical/computer cords
and wires, clutter, icy or unsalted steps, entrances, or parking lots,
reckless behaviour
• Regularly inspect personal protective equipment such as treads
on footwear, and fall protection equipment
• Report hazards on City or other business premises to building
management
15. Be Aware of Your
Surroundings
Look before and while you walk. Make sure your
path is clear and watch where you are going.
• Be aware that black ice can look like wet pavement
• Be aware that immediate entrances and stairs could be slippery from
melted ice or snow
• Walk slowly and carefully when coming indoors with wet footwear.
Try to kick some snow/ice off your footwear (if possible) before entering
premises, and wipe your feet on a floor mat (if available) before stepping
onto bare floors
• Take extra care when getting out of your vehicle on to an ice or snow
covered surface
• Watch out for slippery parking lots, roadways, sidewalks, TTC stops,
slippery or wet stairs or floors (clean up spills immediately)
16.
17. Be Aware of Your Surroundings
• Proceed with extra caution when at unfamiliar premises
• Use caution when walking or climbing stairs in dark conditions, and turn on
lights/use flashlights when possible
• Watch out for uneven sidewalks and crosswalks, and hazards such as potholes
and streetcar tracks
• Be aware of changes in friction of walking surfaces, for example walking from
inside to outside, from snow to ice, from curb to road, from carpet to bare floor
• Slow down and take small careful steps if the surface is rough, cluttered,
slippery or at an angle
• Carry objects close to your body and below chest level, when possible, so you
can see over or around what you are carrying
18. Be Aware of Your Surroundings
Construction Sites
Be aware of increased slip, trip and fall risks
associated with some locations such as
construction projects. Avoid these hazards
whenever possible, and alert others as required.
Some examples include:
•Unguarded floor or wall openings
•Excavations
•Incomplete stairs (e.g. no railings)
•Debris, clutter, gravel
19. Don’t Increase The Risk
(for you or others)
YOUR ACTIONS CAN EITHER REDUCE OR INCREASE YOUR RISK
Walking Technique is Important:
• Take short deliberate steps in which the mid-foot strikes the ground first,
not the heel
• Always centre the body over the feet. This allows you to ensure the mid-
foot strikes the ground first, since most slips occur at the heel strike
phase of gait.
• Walk whenever possible, don’t run or rush. Take the time to be safe by
slowing the walking pace.
• Change direction slowly when walking on slippery surfaces
• Look to see if a less slippery path is an option
20. Don’t Increase The Risk
(for you or others)
CARRYING OBJECTS:
• Carry items safely to avoid slips, trips, and falls
• Carry objects close to your body and below chest level, when
possible, so you can see over or around what you are carrying
• Carrying too many materials at once, or even smaller items in a
way that will throw you off balance or obstruct your vision,
increases risk.
• Take the time to make more than one trip, ask for assistance,
or use assistive devices (e.g. dollies, carts)
The above is important at all times, but especially when slippery
conditions exist or when using stairs. The above principles are
also important for MSD prevention.
21. Don’t Increase The Risk
(for you or others)
• Close desk and cabinet drawers.
• Clear clutter/obstacles from pathways. Observe good housekeeping
practices.
• Use a proper step stool for overhead reaching. Don’t stand on a chair or
box.
• Only use a ladder with proper training. If a ladder is defective, don’t use it,
remove it from use (so no one else can use it), and report it to your
supervisor.
• Sit properly without bending, twisting, or leaning backwards.
• Pick up/clean up items on the floor when observed (spills/water, pens,
paper, etc…).
• Report hazards. Don’t ignore them.
22.
23.
24.
25.
26. Avoid Hazards
• Avoid wet, icy, unsalted walkways when possible.
Look for an alternate route.
• Avoid climbing over snow banks or other obstacles to get to your
destination. Walk whenever possible on cleared, sanded, well lit
walkways.
• Avoid carrying materials in an unsafe manner
• Avoid using objects (such as chairs, boxes) for
purposes other than their intended use
• Avoid using electronic devices while using stairs or walking
• Avoid giving in to time pressures, whenever possible, if they are causing
you to use unsafe behaviour. Find suitable alternatives, or talk to your
supervisor.
27. Use/Wear Proper
Equipment
• Make sure your footwear has good treads and is appropriate
for the weather/task
• If you have been provided with safety footwear, wear it for the
tasks required, as instructed, and as required under the
policy of the workplace you are visiting
• Use handrails on stairs whenever possible, to avoid falls (so
you can catch yourself if you slip). Report defective stairs or
slippery steps to your Supervisor or building management.
• Use assistive devices to safely transport items, ask for
assistance, or take the time to make more than one trip
28. Use/Wear Proper Equipment
• Only use ladders if you have proper training,
and the ladder is not defective
• Use proper footstools to access high shelves,
instead of other devices not intended for that
use
• Do not climb shelves or racking
• Don’t put frequently needed items up high
• Ensure freshly mopped floors have posted
caution signs
29.
30.
31. Exiting and Entering Vehicles
• Always inspect your vehicle and surrounding area
before entering or exiting the vehicle
Survey the environment for items such as ice, snow, grease,
oil, debris, rocks, potholes, uneven surfaces
Survey the vehicle for cracks or excessive wear to the
access points such as steps, handholds, etc.
When possible remove ice, snow, or other debris from
steps, handholds, and footwear before entering or exiting
Ensure vehicle clutter is removed and equipment secured to
avoid trip hazards when entering or exiting
• Whenever possible park the vehicle in an area free of the above
slip/trip/fall hazards
• Check the area for traffic before entering or exiting the vehicle
32. Exiting and Entering Vehicles
• When climbing in or out of a vehicle, face the vehicle where
practicable and always use the three point contact rule. Keep
three points in contact with the vehicle; either one hand and two
feet, or two hands and one foot.
• Use the access steps, footholds, handholds, and rails provided
on the vehicle to support you when entering and exiting.
33. Exiting and Entering Vehicles
• Never jump down from a vehicle, but exit slowly using the
three point contact method
• When entering or exiting cars or pick-up trucks, hold on to the
door or steering wheel to help maintain your balance
• Watch your head clearance when entering or exiting vehicles
• Step with caution (on the mid-foot) in icy conditions
• Load or unload a vehicle in a manner that does not obstruct
your vision, and utilize assistance of others, or assistive devices
as required
• Check the treads on your footwear regularly and replace as
needed
• Report to your supervisor any vehicle or related hazards you are
unable to resolve yourself
34. Slips, Trips, and Falls Prevention
Policy
Click here for City of Toronto Slips, Trips, and Falls
Prevention Policy and Toolkit
The City’s policy identifies a commitment to:
•identifying factors that contribute to slips, trips and falls in City
workplaces
•taking reasonable precautions to prevent introduction of slip,
trip and fall hazards into City workplaces and to
eliminate/reduce slips, trips and fall hazards where they are
identified
•educating staff on measures that will reduce the risks of slips,
trips and falls
The City’s policy identifies the roles and
responsibilities of workplace parties.
35. City of Toronto Slips, Trips, and
Falls Prevention Toolkit
Click here for City of Toronto Slips, Trips, and Falls Prevention
Toolkit
The toolkit is continually evolving. Below are examples of
items already in the toolkit:
Tips for Safely Entering or Exiting Vehicles
Winter Safety Tips - Prevention of Slips, Trips, and Falls
Slips and Trips Hazards Checklist
36. Additional Training Opportunities
• Other City Training courses regarding
Ladder Safety, Fall Protection, and
Scaffolding Safety
http://insideto.toronto.ca/hrweb/health
_and_safety/clusters.htm
37. Review
1. There are regulations concerning guard rails, fall protection, and
ladders
2. What are some common causes of slips/trips/falls?
water, oil, ice, snow, uncovered cables, worn carpet (and
other items on slide 7)
3. If I have to carry a lot of materials that obstruct my vision, are
too heavy, or require me to go up or down stairs, I can:
ask for help
break up the load
use an assistive device
4. Most slips occur at the ____ phase of gait.
heel
38. Review
5. Name one way to avoid falling on stairs.
hold the railing
6. Ensure freshly mopped floors have posted
caution signs
7. Use a _________to access high shelves when necessary.
footstool
8. What is Regulation 851, Section 11?
requires floors and other surfaces used by any worker, to
be kept free of obstructions, hazards and accumulations
of refuse, snow, or ice
9. Name two ways you can avoid falling on ice.
proper footwear with good treads, alter your gait, walk
slowly, take an alternate path, choose sanded cleared
pathways…
39. Review
10. What contact method should be used when exiting or entering
vehicles, or when climbing ladders?
three point contact
11. What do you do if you see a slip/trip/fall hazard you can’t fix
yourself?
report it to your supervisor
40. Acknowledgements
• Canadian Centre for Occupational Health and
Safety
• Ontario Occupational Health & Safety Act and
Regulations and Ministry of Labour
• Ontario Workplace Safety & Insurance Board
• WorkSafe BC
• Toronto Emergency Medical Services
• Toronto Public Health
• City of Toronto OHSCC Slips/Trips/Falls
Prevention Workgroup