The Lock Solar Tilt Kit is an adjustable and universal solar panel mounting system that can be used on flat or pitched roofs. It allows for portrait or landscape orientation of solar modules in arrays of any size. The tilt angle is adjustable between 10 and 30 degrees or 30 and 60 degrees, or can be fixed at 30 or 60 degrees. The system is designed to be easily installed to save installers time and hassle. It is made of corrosion-resistant materials and comes with a 12-year warranty, the longest in the industry.
This document describes the final design of a brake system. It has interchangeable brake pads, a unique tension spring design to keep the brake arms in tension and restrict their movement, an easy to access mechanism through clip-in housing connectors, an alarming warning design that complies with safety protocols, and a high strength hook to withstand loads on the chain.
Shagg Energy ltd. provides customized solar roof mounting structures and solar panel installation services. They design structures suited for specific roof types and climates. They offer installation of solar rooftop systems from 1kWp to over 50kWp at prices ranging from Rs. 5.5-59 per watt depending on the system size, components included, and services provided. Their structures are made from composite materials requiring no maintenance and have proprietary treatments for long life.
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...hhfjksekmm
The document provides instructions for installing a crankshaft in 3 steps:
1. Install the lower halves of the crankshaft main bearings in the crankshaft main bearing caps.
2. Carefully lower the crankshaft into position in the cylinder block and install the main bearing caps.
3. Check the end play of the crankshaft using a dial indicator and ensure it is within the specified range.
Caterpillar cat 955 k track loader (prefix 71j) service repair manual (71j045...udfjjjskekdme
This document provides instructions for servicing the power train of a Caterpillar 955K track loader, including:
- Checking and adjusting the alignment between the engine and transmission.
- Removing and installing the transmission, torque converter, and various transmission components.
- Disassembling and assembling the planetary transmission and torque converter.
- Servicing the transmission hydraulic controls, lubrication system, and mounting adapter.
Detailed step-by-step instructions and diagrams are provided for servicing each component. Tolerances and specifications are given for checking alignments.
The document provides installation instructions and part lists for Rocky Mountain bicycles. Section 1 outlines general installation instructions for thru-bolt hardware, bearings, seat posts, and torque specifications. Section 2 provides detailed part lists and specifications for 5 Rocky Mountain bike platforms: Element, ETSX, Flatline, Slayer SS, and Slayer SXC. Section 3 covers the warranty information.
Northern Power & Automation manufactures diesel and gas generating sets ranging from 10kVA to 3500kVA. They offer static, trailer mounted, weatherproof, and containerized power solutions. The company prides itself on developing personal relationships with customers and providing an unsurpassed level of service throughout the industry.
Eatrhquake response of reinforced cocrete multi storey building with base iso...eSAT Journals
This document summarizes a study on the earthquake response of base isolated reinforced concrete buildings. It describes the basic concept of base isolation, which aims to protect structures from seismic forces by isolating the building from ground movement using devices called isolators. It then discusses different types of isolators and presents the results of analyzing a 3D 8-story building model using different isolators, finding that base isolation substantially reduces base shear, displacements, and member forces compared to a fixed-base building.
The Lock Solar Tilt Kit is an adjustable and universal solar panel mounting system that can be used on flat or pitched roofs. It allows for portrait or landscape orientation of solar modules in arrays of any size. The tilt angle is adjustable between 10 and 30 degrees or 30 and 60 degrees, or can be fixed at 30 or 60 degrees. The system is designed to be easily installed to save installers time and hassle. It is made of corrosion-resistant materials and comes with a 12-year warranty, the longest in the industry.
This document describes the final design of a brake system. It has interchangeable brake pads, a unique tension spring design to keep the brake arms in tension and restrict their movement, an easy to access mechanism through clip-in housing connectors, an alarming warning design that complies with safety protocols, and a high strength hook to withstand loads on the chain.
Shagg Energy ltd. provides customized solar roof mounting structures and solar panel installation services. They design structures suited for specific roof types and climates. They offer installation of solar rooftop systems from 1kWp to over 50kWp at prices ranging from Rs. 5.5-59 per watt depending on the system size, components included, and services provided. Their structures are made from composite materials requiring no maintenance and have proprietary treatments for long life.
Caterpillar cat 938 f wheel loader (prefix 1km) service repair manual (1km000...hhfjksekmm
The document provides instructions for installing a crankshaft in 3 steps:
1. Install the lower halves of the crankshaft main bearings in the crankshaft main bearing caps.
2. Carefully lower the crankshaft into position in the cylinder block and install the main bearing caps.
3. Check the end play of the crankshaft using a dial indicator and ensure it is within the specified range.
Caterpillar cat 955 k track loader (prefix 71j) service repair manual (71j045...udfjjjskekdme
This document provides instructions for servicing the power train of a Caterpillar 955K track loader, including:
- Checking and adjusting the alignment between the engine and transmission.
- Removing and installing the transmission, torque converter, and various transmission components.
- Disassembling and assembling the planetary transmission and torque converter.
- Servicing the transmission hydraulic controls, lubrication system, and mounting adapter.
Detailed step-by-step instructions and diagrams are provided for servicing each component. Tolerances and specifications are given for checking alignments.
The document provides installation instructions and part lists for Rocky Mountain bicycles. Section 1 outlines general installation instructions for thru-bolt hardware, bearings, seat posts, and torque specifications. Section 2 provides detailed part lists and specifications for 5 Rocky Mountain bike platforms: Element, ETSX, Flatline, Slayer SS, and Slayer SXC. Section 3 covers the warranty information.
Northern Power & Automation manufactures diesel and gas generating sets ranging from 10kVA to 3500kVA. They offer static, trailer mounted, weatherproof, and containerized power solutions. The company prides itself on developing personal relationships with customers and providing an unsurpassed level of service throughout the industry.
Eatrhquake response of reinforced cocrete multi storey building with base iso...eSAT Journals
This document summarizes a study on the earthquake response of base isolated reinforced concrete buildings. It describes the basic concept of base isolation, which aims to protect structures from seismic forces by isolating the building from ground movement using devices called isolators. It then discusses different types of isolators and presents the results of analyzing a 3D 8-story building model using different isolators, finding that base isolation substantially reduces base shear, displacements, and member forces compared to a fixed-base building.
Ash and lacy sa spacer support system a4 12pp v1 hiVaughn Botha
As part of our programme of continuous innovation, Ash & Lacy introduce the high performance Ashgrid bar and brackets incorporating the unique Safe-Loc™ feature (patented). Designed to meet the everincreasing demands from Building Regulations whilst at the same time making installation more efficient and safer for contractors on site.
All spacer support systems are at risk during the installation stage when they are not restrained by the sheeting and are subjected to forces from foot traffic, temporary loading and high winds
This document provides information on Metroll's standard C and Z section purlins and girts. It describes that C section purlins are manufactured from galvanized steel and used for simple span construction, while Z section purlins have one broad and one narrow flange allowing them to be lapped together for continuous spans. It also includes specifications, dimensions, installation guidelines and corrosion protection information for Metroll's range of purlins and girts.
D-Block is a refractory lining system for industrial kilns and furnaces that provides fast installation, flexible design, and proven anchoring. It has low thermal mass and conductivity, allowing for low casing temperatures, quick heat up/cool down, and high efficiency. For over 80 years, Detrick has ensured their refractory systems are practical and efficient through thorough design, material selection and testing, installation procedures, and ongoing technical support.
SolarGen was founded by four experts in the construction industry with over a century of combined experience. They offer pre-assembled solar panel racking systems that are factory installed, reducing installation time and costs. Their systems are designed to minimize roof penetrations and impacts while maximizing efficiency and power production.
Trusted Partner for Building Systems is a 2-page product catalogue from PT NS BlueScope Lysaght Indonesia that includes the following sections:
- Roofing & Walling which describes various roofing and wall panel profiles for commercial buildings.
- Truss & Frame which outlines the SMARTRUSS and SMARTFRAME steel truss and framing systems for modern construction.
- Zed & Cee Purlins & Girts which provides information on roll-formed zinc-coated steel sections for roof and cladding support.
The document introduces the Speedfloor system, a unique suspended concrete flooring system for fast, lightweight composite floors. Some key points:
- The system uses rollformed steel joists that are lighter and faster to install than traditional methods.
- It provides similar performance to poured concrete slabs but saves time and money through less curing time and no painting or hassles.
- The system has been successfully implemented in buildings in New Zealand and India, providing benefits like minimal foundations, weight savings, and easy accommodation of services.
This 15-page document provides a comprehensive proposal for a 10KW off-grid solar photovoltaic system. The system would include 40 250-watt solar panels, 1 inverter, mounting structures, electrical accessories, and optional monitoring equipment. Installation is estimated to take 1-8 weeks upon receipt of payment. The total cost is estimated at 7.5 lakhs plus additional costs for taxes and an upgraded inverter capacity. A 25-year warranty is provided for the solar panels and shorter warranties for other components.
ESSA is a steel guardrail manufacturer in Indonesia that has been in business since 2013. They offer a variety of highway guardrail products that meet American and Indonesian safety standards, including W-beam, thrie-beam, and box-beam guardrails. ESSA provides guardrails in different lengths and configurations and accessories to suit customer needs. As a manufacturer, they can handle all aspects of guardrail production from design to fabrication.
Clenergy's PV-ezRack SolarRoof is a versatile roof-mounting solution for pitched and flat roofs that can accommodate most module types. It uses an innovative rail system along with Z-modules and standard roof hooks to provide a safe, cost-effective installation for solar panels. The system is suitable for roof slopes up to 60 degrees, roof heights up to 20 meters, and wind and snow loads up to 80m/s and 1.4kN/m2. An aluminum construction and 10-year warranty provide durability.
The document discusses cable tray solutions from Thomas & Betts for the oil and gas industry. It describes their high-strength aluminum cable trays that are designed for safety in hazardous locations. It also details innovative fittings and splices that allow for easy installation and transitions between horizontal and vertical runs to maximize efficiency.
The document provides a proposal for a 50 KVA on-grid solar PV system. It includes a 41 KW DC capacity system using 136 300-watt solar panels that is expected to produce 100,800 KWh of energy per year. The system components include the solar panels, inverters, mounting structures, cables, and other electrical accessories. The total cost of the project is 24 lakh INR and payment terms include an initial advance payment and stages of payment upon delivery and installation.
The document describes the CSP-M self-aligning load cell mounts. It discusses two main types of mounts: 1) A weighbridge mount designed for truck and rail scales that allows for horizontal movement of up to 16 mm; and 2) A silo mount suitable for batch weighing and process control that tolerates movement in all directions. Both mounts use hardened steel components at load bearing surfaces. Dimensions and additional information is provided for the 10-25T and 40-60T capacity mounts.
This document provides information on theft prevention products from STI, including CCTV camera housings. The housings are available in aluminum or diecast aluminum and come in different models, including some with sun shields and heaters. They are designed to protect CCTV cameras from vandalism and tampering. Dimensions and technical specifications are provided for the main housing models.
This document provides information on theft prevention products from STI, including CCTV camera housings. The housings are available in aluminum or diecast aluminum and come in different models, including some with sun shields and heaters. They are designed to protect CCTV cameras from vandalism and tampering. Dimensions and technical specifications are provided for the main housing models.
This document provides information on theft prevention products from STI, including CCTV camera housings. The housings are available in aluminum or diecast aluminum and come in different models, including basic housings or housings with a heater, blower and sun shield. The sun shield can reduce the internal temperature by 4°F. Mounting brackets and pole mounts are also available. Warranties cover enclosures, brackets and electronics for one year under normal use. Dimensions and specifications are provided for the main models.
HatiCon is a world leader in designing and manufacturing aluminum mounting systems for solar projects. It has installed over 6GW of solar projects worldwide since being founded in Germany in 2006. HatiCon offers a range of free field, flat roof, pitched roof, and industrial roof mounting systems that feature quick assembly, easy installation, and adaptability for different module and project types. Sapa Extrusion India is a manufacturer of aluminum extrusions and solutions that has capabilities in extrusion, surface treatment, and fabrication. It supplies products to the solar industry such as solar module frames and mounting systems.
C/S Grilles were used in the new Linny Pacillo Parking Garage in Anchorage, Alaska to screen parked cars from the street below and provide adequate ventilation. Kpb Architects and Davis Constructors worked with C/S to design grille options that would mitigate ice and snow buildup. The final design is a unique architectural solution that is highly effective for Alaska's severe climate, screening vehicles while allowing air flow.
The 15-page document provides a proposal for a 10KW solar PV system with the following key details:
1. The system will include 40 solar panels totaling 10KW DC capacity and two 7.5KVA inverters.
2. The expected annual energy production is estimated to be 1.5 MWh based on the site location in Rajkot, India.
3. The total cost of the project is 6 lakhs Indian rupees and payment terms include an initial advance of 4 lakhs with the balance due upon installation.
The document provides a proposal for a 15 KVA/10kw on-grid solar PV system. The system would include 40 solar panels totaling 10 KW DC capacity, two 7.5 KVA inverters, mounting structures, electrical accessories, and installation. The expected annual energy production is 1.5 MWh. The total cost of the project is 6 lakhs Indian rupees and payment terms include an advance, payment upon delivery of materials, and final payment after installation.
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Ash and lacy sa spacer support system a4 12pp v1 hiVaughn Botha
As part of our programme of continuous innovation, Ash & Lacy introduce the high performance Ashgrid bar and brackets incorporating the unique Safe-Loc™ feature (patented). Designed to meet the everincreasing demands from Building Regulations whilst at the same time making installation more efficient and safer for contractors on site.
All spacer support systems are at risk during the installation stage when they are not restrained by the sheeting and are subjected to forces from foot traffic, temporary loading and high winds
This document provides information on Metroll's standard C and Z section purlins and girts. It describes that C section purlins are manufactured from galvanized steel and used for simple span construction, while Z section purlins have one broad and one narrow flange allowing them to be lapped together for continuous spans. It also includes specifications, dimensions, installation guidelines and corrosion protection information for Metroll's range of purlins and girts.
D-Block is a refractory lining system for industrial kilns and furnaces that provides fast installation, flexible design, and proven anchoring. It has low thermal mass and conductivity, allowing for low casing temperatures, quick heat up/cool down, and high efficiency. For over 80 years, Detrick has ensured their refractory systems are practical and efficient through thorough design, material selection and testing, installation procedures, and ongoing technical support.
SolarGen was founded by four experts in the construction industry with over a century of combined experience. They offer pre-assembled solar panel racking systems that are factory installed, reducing installation time and costs. Their systems are designed to minimize roof penetrations and impacts while maximizing efficiency and power production.
Trusted Partner for Building Systems is a 2-page product catalogue from PT NS BlueScope Lysaght Indonesia that includes the following sections:
- Roofing & Walling which describes various roofing and wall panel profiles for commercial buildings.
- Truss & Frame which outlines the SMARTRUSS and SMARTFRAME steel truss and framing systems for modern construction.
- Zed & Cee Purlins & Girts which provides information on roll-formed zinc-coated steel sections for roof and cladding support.
The document introduces the Speedfloor system, a unique suspended concrete flooring system for fast, lightweight composite floors. Some key points:
- The system uses rollformed steel joists that are lighter and faster to install than traditional methods.
- It provides similar performance to poured concrete slabs but saves time and money through less curing time and no painting or hassles.
- The system has been successfully implemented in buildings in New Zealand and India, providing benefits like minimal foundations, weight savings, and easy accommodation of services.
This 15-page document provides a comprehensive proposal for a 10KW off-grid solar photovoltaic system. The system would include 40 250-watt solar panels, 1 inverter, mounting structures, electrical accessories, and optional monitoring equipment. Installation is estimated to take 1-8 weeks upon receipt of payment. The total cost is estimated at 7.5 lakhs plus additional costs for taxes and an upgraded inverter capacity. A 25-year warranty is provided for the solar panels and shorter warranties for other components.
ESSA is a steel guardrail manufacturer in Indonesia that has been in business since 2013. They offer a variety of highway guardrail products that meet American and Indonesian safety standards, including W-beam, thrie-beam, and box-beam guardrails. ESSA provides guardrails in different lengths and configurations and accessories to suit customer needs. As a manufacturer, they can handle all aspects of guardrail production from design to fabrication.
Clenergy's PV-ezRack SolarRoof is a versatile roof-mounting solution for pitched and flat roofs that can accommodate most module types. It uses an innovative rail system along with Z-modules and standard roof hooks to provide a safe, cost-effective installation for solar panels. The system is suitable for roof slopes up to 60 degrees, roof heights up to 20 meters, and wind and snow loads up to 80m/s and 1.4kN/m2. An aluminum construction and 10-year warranty provide durability.
The document discusses cable tray solutions from Thomas & Betts for the oil and gas industry. It describes their high-strength aluminum cable trays that are designed for safety in hazardous locations. It also details innovative fittings and splices that allow for easy installation and transitions between horizontal and vertical runs to maximize efficiency.
The document provides a proposal for a 50 KVA on-grid solar PV system. It includes a 41 KW DC capacity system using 136 300-watt solar panels that is expected to produce 100,800 KWh of energy per year. The system components include the solar panels, inverters, mounting structures, cables, and other electrical accessories. The total cost of the project is 24 lakh INR and payment terms include an initial advance payment and stages of payment upon delivery and installation.
The document describes the CSP-M self-aligning load cell mounts. It discusses two main types of mounts: 1) A weighbridge mount designed for truck and rail scales that allows for horizontal movement of up to 16 mm; and 2) A silo mount suitable for batch weighing and process control that tolerates movement in all directions. Both mounts use hardened steel components at load bearing surfaces. Dimensions and additional information is provided for the 10-25T and 40-60T capacity mounts.
This document provides information on theft prevention products from STI, including CCTV camera housings. The housings are available in aluminum or diecast aluminum and come in different models, including some with sun shields and heaters. They are designed to protect CCTV cameras from vandalism and tampering. Dimensions and technical specifications are provided for the main housing models.
This document provides information on theft prevention products from STI, including CCTV camera housings. The housings are available in aluminum or diecast aluminum and come in different models, including some with sun shields and heaters. They are designed to protect CCTV cameras from vandalism and tampering. Dimensions and technical specifications are provided for the main housing models.
This document provides information on theft prevention products from STI, including CCTV camera housings. The housings are available in aluminum or diecast aluminum and come in different models, including basic housings or housings with a heater, blower and sun shield. The sun shield can reduce the internal temperature by 4°F. Mounting brackets and pole mounts are also available. Warranties cover enclosures, brackets and electronics for one year under normal use. Dimensions and specifications are provided for the main models.
HatiCon is a world leader in designing and manufacturing aluminum mounting systems for solar projects. It has installed over 6GW of solar projects worldwide since being founded in Germany in 2006. HatiCon offers a range of free field, flat roof, pitched roof, and industrial roof mounting systems that feature quick assembly, easy installation, and adaptability for different module and project types. Sapa Extrusion India is a manufacturer of aluminum extrusions and solutions that has capabilities in extrusion, surface treatment, and fabrication. It supplies products to the solar industry such as solar module frames and mounting systems.
C/S Grilles were used in the new Linny Pacillo Parking Garage in Anchorage, Alaska to screen parked cars from the street below and provide adequate ventilation. Kpb Architects and Davis Constructors worked with C/S to design grille options that would mitigate ice and snow buildup. The final design is a unique architectural solution that is highly effective for Alaska's severe climate, screening vehicles while allowing air flow.
The 15-page document provides a proposal for a 10KW solar PV system with the following key details:
1. The system will include 40 solar panels totaling 10KW DC capacity and two 7.5KVA inverters.
2. The expected annual energy production is estimated to be 1.5 MWh based on the site location in Rajkot, India.
3. The total cost of the project is 6 lakhs Indian rupees and payment terms include an initial advance of 4 lakhs with the balance due upon installation.
The document provides a proposal for a 15 KVA/10kw on-grid solar PV system. The system would include 40 solar panels totaling 10 KW DC capacity, two 7.5 KVA inverters, mounting structures, electrical accessories, and installation. The expected annual energy production is 1.5 MWh. The total cost of the project is 6 lakhs Indian rupees and payment terms include an advance, payment upon delivery of materials, and final payment after installation.
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Generative AI Use cases applications solutions and implementation.pdfmahaffeycheryld
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...PIMR BHOPAL
Variable frequency drive .A Variable Frequency Drive (VFD) is an electronic device used to control the speed and torque of an electric motor by varying the frequency and voltage of its power supply. VFDs are widely used in industrial applications for motor control, providing significant energy savings and precise motor operation.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELijaia
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Software Engineering and Project Management - Software Testing + Agile Method...Prakhyath Rai
Software Testing: A Strategic Approach to Software Testing, Strategic Issues, Test Strategies for Conventional Software, Test Strategies for Object -Oriented Software, Validation Testing, System Testing, The Art of Debugging.
Agile Methodology: Before Agile – Waterfall, Agile Development.
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.
Digital Twins Computer Networking Paper Presentation.pptxaryanpankaj78
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Null Bangalore | Pentesters Approach to AWS IAMDivyanshu
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Gas agency management system project report.pdfKamal Acharya
The project entitled "Gas Agency" is done to make the manual process easier by making it a computerized system for billing and maintaining stock. The Gas Agencies get the order request through phone calls or by personal from their customers and deliver the gas cylinders to their address based on their demand and previous delivery date. This process is made computerized and the customer's name, address and stock details are stored in a database. Based on this the billing for a customer is made simple and easier, since a customer order for gas can be accepted only after completing a certain period from the previous delivery. This can be calculated and billed easily through this. There are two types of delivery like domestic purpose use delivery and commercial purpose use delivery. The bill rate and capacity differs for both. This can be easily maintained and charged accordingly.
1. Portrait installation
Open terrain
Unframed module Framed module Orientation
portrait
Orientation
landscape
Warranty
year
Mad
e in USA• CC
R
•CAGE:6BW
TO•DUNS:96
5986628•
Sigma Pure is a PV ground mount system designed for ground mount arrays up
to 100 kW. Sigma Pure uses readily available galvanized steel pipes for support
legs, which are embedded into concrete peirs or installed into earth screws and
held in place by three set screws. The steel legs support a strong, corrosion-
resistant aluminum and stainless steel superstructure. Preassembled clamps and
connection hardware help speed array assembly.
Versatile configurations
Sigma Pure can be configured for both landscape and portrait orientations. In
landscape, modules can be mounted in columns up to four high with up to 9
modules per row. In portrait, modules can be two high with up to 9 modules
per row. Either configuration can be mounted into concrete piers or earth
screws.
Cost effective
Sigma Pure is a highly cost-effective system due to its components that are
readily available off-the-shelf from your distributor, making for a robust
yet economical PV mounting structure. Cost is further reduced with the
incorporation of preassembled superstructure components, which minimizes
labor. Sigma Pure's strong, extruded aluminum superstructure helps maximize
the span between supports, decreasing the overall number of supports
required. Furthermore, Sigma Pure is compatible with earth screws, optimizing
Sigma Pure for good terrain adaptability and reducing the need for expensive
site grading and modification.
Pre-engineered
All of Sigma Pure's configurations are PE stamped in solar friendly states to
facilitate permitting and approval, providing peace of mind in Sigma Pure's
durability and longevity.
Sigma Pure Advantages
Sigma Pure implements a strategic combination of engineering innovation, fast
procurement, and easy installation that is both economical and long-lasting,
resulting to a ground mount system ideal for a wide range of system sizes and
configurations.
SigmaPure InformationSheet
Sigma Pure