More than 1.7 years of experience into mechanical engineering

1. RESUME
Name: Sharana Basava. D
Email: sharana2494@gmail.com
Mobile: +918296826306
Linkedin Contact
linkedin.com/in/sharana-basava-d-
835493104
To work in a creative and challenging environment using mechanical design concepts, where I could constantly
learn and successfully deliver solution to problems.
 1.7 Years of experience into mechanical design and development
 Strong problem solving skills and creative approach for generating new ideas
 Good knowledge in creating 3D CAD models with 2D drafting
 Good at CAE analysis to design and develop a new casting methods
 Knowledge about sand, investment and die casting process
 Research and development in casting design
 Good at creating sheet metal 3D Cad models with 2D Drafting
 A good leadership with strong team collaboration skills, work closely with team members to achieve engineering
goals
Company: Harness – Design & Simulation Aid, Bangalore June 2018 – Present
Designation: Design Engineer
Roles & Responsibilities:
 Project & Client Management.
 Developing 3D Cad models and 2D drafting.
 Performing Foundry Simulation and New Casting Method Projects (Z-Cast)
 Providing Foundry Method ideologies that can be implemented on the shop floor without any constraints
 Under-going specific root cause analysis for proper development of the product
 Report generation & present project analysis
 Sheet metal electrical PLC Panel design and creating 3D models with 2D Drafting
 Federal Mogul Powertrain , Bangalore August 2017 to December 2017
Designation: Apprentice in plant training
Roles & Responsibilities:
 Study of piston ring production and quality inspection
 Scrap rate reduction of piston rings
 Creation of sample operating procedure(SOP) for quality measuring instruments
 PTC CREO Parametric / Pro-E
 Solid Works
 UG NX Cad
 CATIA
 Ansys, Ansys Workbench
 Z Cast Pro (Casting Simulation)
 Solid Edge , Autocadd 2D&3D
 2D Drafting
 3D Modelling
 GD&T
 New casting method design and development
 Sheet metal Design
 Research and Development
CARRIER OBJECTIVE:
WORK EXPERIENCE: (1.7 Years)
ACADEMIC PROFILES:
PROFILE SUMMARY:
ACADEMIC PROFILES:
SOFTWARE SKILLS:
Technical Skills
TECHNICAL SKILLS:
Technical Skills

2. Course Name Of School/College Board / University Percentage
Year of
Passing
M.Tech
(Machine Design )
BMS Institute of Technology
and Management, Yelahanka,
Bangalore
VTU, Belgum 8.32 2018
B.E (Mechanical
Engineering)
Ballari Institute of Technology &
Management, Ballari VTU, Belgum 70.84% 2016
PUC
Wardlaw Composite PU
College, Ballari
state Board of
Secondary education 71.38% 2012
SSLC ST. Johns high school, Ballari state Board 84% 2010
1. Title : Design and Experimental Investigation of Lapping Process for Productivity Improvement of
I-Section Piston Rings at Federal Mogul powertrain
Major scrap rate survey has been done for production of piston ring at federal mogul TPR plant and
Root cause has been identified for major scrap rate design optimisation for loading method in lapping
Process done to reduce the major scrap rate and improve the production rate and quality of I section piston
rings.
2. Title : Design and Fabrication of solar heater and cooler by the application of thermo electric module
By using Peltier effect principle a device has been designed and fabricated, which can be used as heater
as well as cooler with the help of solar Energy.
3. Title : New Casting Method Design and Development
Client: Sri siva sai casting Pvt. Ltd.
New casting method design and developed for spring pot component to optimise the number of feeders
and yield improvement
4. Title : New Casting Method Design and Development
Client: Techno rings
New casting method designed Tafe CSO Bracket component to replace the feeders with gating system
for thin section to improve the yield improvement
5. Title : Existing Method Optimization
Client: Techno rings
Casting orientation changed for Engine mounting bracket to enhance the yield and robust design for
Existing method
6. Title : Existing Method Optimization
Client: Autoclutches
Casting method optimised for relay arm component replaced two feeders with one feeder and gating
System design enhance the yield and robust design
7. Title : New Casting method design and development
Cleints: Rajamane Industries Pvt Ltd
Visited rajamane industries plant and new casting method design and developed to improve the robust
design and yield improvement
ACADEMIC PROFILE
PROJECT UNDERTAKEN:
ACADEMIC PROFILES:

3.  Published a research paper in “International Journal of Scientific Engineering and Research” with Paper ID:
IJSER72707 and Entitled with “Design and Experimental Investigation of Lapping Process for
Productivity Improvement of I-Section Piston Rings”.
 Participated in the final dynamic round held on 26th
to 28th
February 2015 at Rpm international circuit,
Bhopal (Madhya Pradesh).
 Secured second place in chess in district level south region sports competition.
 Completed junior level NCC training and Attended CATC NCC camp in the year of 2008.
 Participated in the “All India Seminar on Residual Stress and Advanced NDT Techniques for Structural
Integrity Assessment Key Challenge And Remedies” at IISC Campus, Bangalore.

Name Sharana basava D
Fathers Name Rajasekhar.D
Mothers Name Mamatha.D
Date Of Birth 02-04-1994
Gender Male
Nationality Indian
Languages Known English, Hindi ,Kannada & Telugu
Hobbies Drawing, Playing Chess, Photography ,Playing Cricket,
watching documentaries, Creating 3D Models
I hereby declare that the above written particulars are true to the best of my knowledge and belief. I understand
that if any information given above is found false /incorrect, my candidature is liable to be rejected.
Place: Bangalore
Date: Sharana Basava.D
AWARDS & ACHIEVEMENT:
PERSONAL PROFILE:
DECLARATION: