Rangan Mitra Ray is seeking a responsible position where he can help further an organization's growth. He has over 4 years of experience as a mechanical engineer working on projects in steel and aluminum mills. He is proficient in AutoCAD and MS Office. Currently working as a Senior Engineer at M.N. Dastur & Co., his responsibilities have included engineering design, project coordination, and maintaining quality standards. He holds a Bachelor's degree in Mechanical Engineering and is fluent in English, Hindi, and Bengali.
1. CURRICULUM VITAE
Name:- RANGAN MITRA RAY
Contact Information:-
Address: - 3, Selimpur Bye Lane, Dhakuria, Kolkata- 700031
Phone: - +919674562677
E-mail:- rmitray.rangan@gmail.com
Personal Information:-
Date of Birth: - 15.07.1988
Nationality: - Indian
Gender: - Male
Marital status: - Single
Career objectives:-
Seeking a responsible and challenging position, in an energetic and self-motivating
environment where my professional attitude and constant drive towards success
enables me to help further for growth and development of the organization & to
remain honest and modest to my profession, my colleagues and most of all to
myself.
Professional Summary:-
i) Have more than Four and half years of experience as Consultant Mechanical
Engineer and have been associated extensively with Basic and detail
engineering of rolling mills for flat products in steel plant (Plate Mill) and
aluminium mill, along with assistance in site problems and interferences.
ii) Took major part in tender discussions for annealing and galvanizing strip
processing lines.
iii) Experience in preparing feasibility report and concept notes for rail and beam
mill. Also have experience in preparing proposal for normalizing furnace and
associated mechanical equipment.
iv) Single handedly maintains the ISO and QMS (Quality Management
System) guidelines for department, with preparing and updating all the
required documentation for department.
v) Experience in successful project handling and co-ordination in order to meet
certain laid out project demands within fixed timeline.
2. vi) Experience in directly dealing with Client & solving issues.
vii) Experience in detailed layout drawing preparation through Draftsperson
including checking & release of final GFC (good for construction) civil and
structural drawing.
viii) Good communications and interpersonal skills backed up-by-sound
professional ability to work independently as well as a team member.
Employment Record:-
Presently working in M.N.DASTUR & Co. (P) LTD., Kolkata as Senior Engineer
since August 2010 till date.
Educational Background:-
Softwares known:-
AutoCAD 2004, 2006, 2009, 2012; MS Office
QUALIFICATION DISCIPLINE INSTITUTION
UNIVERSIT
Y/BOARD
YEAR
OF
PASSING
Percentage
/ DGPA
B.E.
Mechanical
Engineering
Jadavpur
University
Jadavpur
University
2010
8.22 out of
10
(76.65%)
HIGHER
SECONDARY
Science
Jodhpur Park
Boys’ High
School,
Kolkata
West Bengal
Council of
Higher
Secondary
Education
2006 89.6%
MADHYAMIK General
Jodhpur Park
Boys’ High
School,
Kolkata
West Bengal
Board of
Secondary
Education
2004 89.4%
3. Important Projects Handled:-
i) Name of Assignment: Kalinganagar Cold Rolling Mill Complex (KPO-
CRM), Continuous Annealing and Continuous
Galvanizing Line (CAL & CGL, capacity 0.4 MTPA
each), Orissa, India.
Duration: Oct 2011 – Feb 2012.
Client: Tata Steel Limited (TSL)
Roles and Responsibilities:
Review of bidders’ offers and preparation of clarification points based on
them.
Extensive participation tender discussion meetings among TSL and bidders
from DasturCo as consultant.
Preparation of comparative technical tabulation on CAL & CGL packages and
sub packages.
ii) Name of Assignment: Inspection & Reconditiong Line for black bars (IL-2)
(capacity 0.4 MTPA), Tadipatri, Andhra Pradesh, India.
Duration: Feb 2012– May 2012.
Client: Kalyani Gerdau Steel Limited (KGSL)
Roles and Responsibilities:
Review of bidders’ offers and preparation of clarification points based on
them.
Preparation of comparative technical tabulation on IL-2 package.
Design calculation of a finished product dispatch yard for intermediate bar
storage between bar mill and Inspection & reconditioning line.
iii) Name of Assignment: New Plate Mill (capacity 0.92 MTPA) - finishing
facilities, Rourkela, Orissa India.
Duration: May 2012 – till date.
Client: Steel Authority of India Limited (SAIL)
Roles and Responsibilities:
Basic Engineering (completed): GA drawings checking, scrutinizing and
finalization, process calculations and primary layout finalization.
Detail Engineering (ongoing): Equipment and process detail
drawing/documents checking, scrutinizing, finalization & issuing for site
4. work, layout modifications, finalization of locations of various plant facilities,
attending and participating in Engineering meetings among client and supplier
from DasturCo for engineering decisions, finalization of drawing list, spare
part etc. documents.
Project co-ordination: Extensive role in co-ordination between various internal
departments and site offices to mitigate problems occurring during site work,
assistance during site work, resolving site problems in cases of interference of
various interdisciplinary issues (e.g. resolving interference between equipment
disposition and/or utility/electrical cable/conduit routing etc.).
iv) Name of Assignment: JSPL-TEFR - New MLSM and RUBM (capacity 0.3
MTPA each), Raigarh, Chattisgarh.
Duration: April 2014 – June 2014.
Client: Jindal Steel and Power Limited (RINL)
Roles and Responsibilities:
Preparation of concept note and TEFR for installation of a new Medium and
Light Structural Mill (MLSM) and installation of new Rail Head Hardening
Unit along with other facilities (e.g. carbide drilling, stamping machine, long
rail welding and grinding unit etc.). Same is accepted and well appreciated by
the client.
v) Name of Assignment: RSP- New Plate Mill- Installation of Normalizing
Furnace (capacity 50t/h), Rourkela, Orissa.
Duration: June 2014 – July 2014.
Client: Steel Authority of India Limited (SAIL)
Roles and Responsibilities:
Preparation of process scheme for a new normalizing furnace installation
(considered in future in the RSP 0.92 MTPA Plate Mill installation) to prepare
plates of special grades of steel for state-of-the-art processes. Preparing
product mix, process flow and equipment details in a proposal format and a
finalized layout of the same. Same has been accepted by the client and the
proposed scheme is now on its way to be materialized.
vi) Name of Assignment: TSL – BARA CRM – Augmentation of Pickling Line
& installation of a new skin pass mill – (0.3 to
0.6MTPA) – Jamshedpur, Jharkhand
Duration: January 2015 – till date.
Client: Tata Steel Limited (TSL)
Roles and Responsibilities:
5. Detail engineering of mechanical equipments and other facilities for the hot
skin pass mill and acid pickling line, civil drawing scrutinizing and clearance.
Interaction with clients and supplier to resolve problems related to detail
engineering of mechanical equipments and related auxiliary facilities.
vii) Name of Assignment: SENAAT- AFM– Aluminium foil mill – Basic
& detail engineering of a new aluminium foil mill –
(0.05 MTPA) – ABU DHABI, UAE
Duration: January 2015 – till date.
Client: SENAAT General Holding Corporation (SENAAT)
Roles and Responsibilities:
Basic & Detail engineering of a new Aluminium rolling mill of 0.05
MTPA capacity, layout finalization, finalization of equipment disposition
and inputs for crane and forklift logistics, basic and detail equipment and
other process related drawing scrutiny (GA and detail drawings),
finalization of auxiliary facilities disposition, vivid client and supplier
interaction (through Video conference), preparation of technical
specification for balance of plant (BOP) package.
Academic projects:-
Design of centrifugal pump handling slurry water.
Languages known:-
English – Extremely fluent in written and verbal use.
Hindi - Fluent in verbal use.
Bengali - Fluent in written and verbal use (Mother Tongue).
ORGANIZATIONAL SKILLS :-
1) One of the first two students to introduce ASME in Jadavpur University to open
their student chapter in JU, the first institute in East India after IIT Kharagpur.
The first student member thereby of ASME from JU.
2) Single handedly organized the reunion of Mechanical Department of Jadavpur
University in 2009 as student volunteer.
6. EXTRA CURRICULAR ACTIVITIES: -
1) Completed up to 4th year in Tabla & fine arts.
2) Extensively associated with quizzing at school and college level.
3) Ran and composed articles in an e-magazine ‘ICHHEDANA’ as editor
4) Taken parts in dramas at school level.
5) Able swimmer, freestyle swimming specialist.
DECLARATION
I do hereby declare that the above statements are true and correct to the best
of my knowledge and belief. In the event of any information found
false/incorrect, appropriate action may be taken against me without any
notice.
PLACE: KOLKATA -------------------------------
DATE: 06.12.2015 (SIGNATURE)
RANGAN MITRA RAY