Fpt's human resource strategies in 2009 (a look back)Vu Hung Nguyen
FYI a good slide about HR strategy by Mr. Dat, Head of HR in FPT since 2007. Some points:
- FPT has HR management systems (such as PeopleSoft)
- FPT has short, middle and long term plan about HR (< 1 year, 1-2 years, 2-5 years)
- They define, design and execute HR functions
- Some functional groups: recruiment, learning/training/dev. and staff managements
- They have basic design and principles per se
- 5 strategies, 9 action programmes defined at group level
ref. http://www.slideshare.net/johnfkenedy/hr-strategy-fpt
Nguyen Vu Hung: Beyond Agile - Practices and Mindset - Agile Tour Vietnam (Ha...Vu Hung Nguyen
"Beyond Agile: practices and mindset"
At Septeni Technology, we've been trying to apply Agile practices and and its principles for over two years for IT projects as well as web-based services since the beginning of the company. In this session, as a case study, with the purpose of sharing our knowledge, I would like to share our best practices for applying Agile, the tools we are using, the mindset we must have for applying Agile successfully.
About Hung Nguyen
Nguyen Vu Hung is the CTO of Septeni Technology, a development center of Tokyo based Septeni Group that focuses on developing and operating, mostly, web-based online advertisement systems. He has numerous years of IT and software development, project/product management in both Japan and Vietnam. Considering himself as a FOSS and Agile evangelist and being a Agile lover and an CTO, he is also interested in not-so-related domains such as human resource management and (organization) (re)structuring.
References:
https://www.facebook.com/nguyenvuhung
http://www.agiletourvietnam.org/
https://www.facebook.com/groups/agilevietnam/
Tranh luận trên các diễn đàn công cộng là một hình thức trao đổi ý kiến không thể thiếu được trong một xã hội văn minh. Ở nhiều nước, lưu lượng của những tranh luận cởi mở và nghiêm túc được xem là một dấu hiệu của một xã hội lành mạnh. Ở các nước phương Tây, hầu như ngày nào báo chí cũng có những bài của những cây bỉnh bút tranh luận về một vấn đề nóng nào đó. Trên tivi cũng có những cuộc tranh luận trực tiếp giữa hai hay nhiều người về những chủ đề từ “đại sự” đến những vấn đề tưởng như nhỏ nhất. Trong các hội nghị khoa học, trước một vấn đề còn trong vòng nghi vấn, người ta cũng có những chuyên gia tranh luận dưới dạng những bài giảng khoa học.
Trabalho para a matéria de História do Teatro, do curso TÉCNICO EM ARTE DRAMÁTICA do Senac Lapa Scipião, onde devíamos escolher um dramaturgo do Realismo aos tempos atuais e fazer um artigo relacionando sua vida com uma obra sua.
Meu dramaturgo: Lourenço Mutarelli
Peça: A Hora Errada
Liên hệ page để nhận link download sách và tài liệu: https://www.facebook.com/garmentspace
https://www.facebook.com/garmentspace.blog
My Blog: http://congnghemayblog.blogspot.com/
Từ khóa tìm kiếm tài liệu : Wash jeans garment washing and dyeing, tài liệu ngành may, purpose of washing, definition of garment washing, tài liệu cắt may, sơ mi nam nữ, thiết kế áo sơ mi nam, thiết kế quần âu, thiết kế veston nam nữ, thiết kế áo dài, chân váy đầm liền thân, zipper, dây kéo trong ngành may, tài liệu ngành may, khóa kéo răng cưa, triển khai sản xuất, jacket nam, phân loại khóa kéo, tin học ngành may, bài giảng Accumark, Gerber Accumarkt, cad/cam ngành may, tài liệu ngành may, bộ tài liệu kỹ thuật ngành may dạng đầy đủ, vật liệu may, tài liệu ngành may, tài liệu về sợi, nguyên liệu dệt, kiểu dệt vải dệt thoi, kiểu dệt vải dệt kim, chỉ may, vật liệu dựng, bộ tài liệu kỹ thuật ngành may dạng đầy đủ, tiêu chuẩn kỹ thuật áo sơ mi nam, tài liệu kỹ thuật ngành may, tài liệu ngành may, nguồn gốc vải denim, lịch sử ra đời và phát triển quần jean, Levi's, Jeans, Levi Straus, Jacob Davis và Levis Strauss, CHẤT LIỆU DENIM, cắt may quần tây nam, quy trình may áo sơ mi căn bản, quần nam không ply, thiết kế áo sơ mi nam, thiết kế áo sơ mi nam theo tài liệu kỹ thuật, tài liệu cắt may,lịch sử ra đời và phát triển quần jean, vải denim, Levis strauss cha đẻ của quần jeans. Jeans skinny, street style áo sơ mi nam, tính vải may áo quần, sơ mi nam nữ, cắt may căn bản, thiết kế quần áo, tài liệu ngành may,máy 2 kim, máy may công nghiệp, two needle sewing machine, tài liệu ngành may, thiết bị ngành may, máy móc ngành may,Tiếng anh ngành may, english for gamrment technology, anh văn chuyên ngành may, may mặc thời trang, english, picture, Nhận biết và phân biệt các loại vải, cotton, chiffon, silk, woolCÁCH MAY – QUY CÁCH LẮP RÁP – QUY CÁCH ĐÁNH SỐTÀI LIỆU KỸ THUẬT NGÀNH MAY –TIÊU CHUẨN KỸ THUẬT – QUY CÁCH ĐÁNH SỐ - QUY CÁCH LẮP RÁP – QUY CÁCH MAY – QUY TRÌNH MAY – GẤP XẾP ĐÓNG GÓI
Chia sẻ kinh nghiệm học cờ cùng con - Nguyễn Vũ Kỳ Anh U8
Tham khảo:
Học cờ cùng con U6 https://www.slideshare.net/vuhung16plus/hoc-co-cung-con
Học cờ cùng con U7 https://www.slideshare.net/vuhung16plus/2018-hoc-co-cung-co-nguyen-vu-ky-anh-u7
2018 Học cờ cùng con - Nguyễn Vũ Kỳ Anh [U7]Vu Hung Nguyen
Chia sẻ kinh nghiệm học/dạy cờ với Nguyễn Vũ Kỳ Anh trong khoảng thời gian 1 năm U7
Học cờ cùng con U6 https://www.slideshare.net/vuhung16plus/hoc-co-cung-con
Học cờ cùng con U7 https://www.slideshare.net/vuhung16plus/2018-hoc-co-cung-co-nguyen-vu-ky-anh-u7
Học cờ cùng con U8 https://www.slideshare.net/vuhung16plus/hoc-co-cung-con-nguyen-vu-ky-anh-u8/
FPT Univ. Talkshow IT khong chi la lap trinhVu Hung Nguyen
FPT Univ. Talkshow: IT không chỉ là lập trình.
Nội dung:
Làm IT là làm cái gì?
Làm IT thì KHÔNG là cái gì?
Lập trình & kỹ năng cần thiết
Những nẻo đường IT (khác) (not coder)
Nghề gì lương cao? Cao bao nhiêu?
Giỏi code chưa chắc đã được gửi xe
(Kỹ năng) Cứng và mềm: Cầm cái nào?
Để coder nổi bật giữa đám đông
Fullstack làm (được) gì?
Kế hoạch cuộc đời
Basic & Advanced Scrum Framework / Scrum cơ bản và nâng cao:
Điểm nhấn:
- 100+ slides
- Nhiều nội dung từ cơ bản đến cao cấp
- Nhiều cách học (tự học cá nhân, theo nhóm)
- In-house training available (liên lạc tôi: Vũ Hưng...)
Nội dung chính:
- Giới thiệu & lịch sử Scrum
- Scrum cơ bản
- Scrum nâng cao
- Những câu hỏi thường gặp
- Các tình huống thực tế
- Bộ công cụ Agile/Scrum
- Trao đổi/thảo luận
File gốc: https://docs.google.com/presentation/d/1bnZTSitzNn9TTY1nJbYG2fA_Z3BriUoAvHqZorOABqg/edit#slide=id.g1ad7d55466_0_96
TALKSHOW – KHỞI ĐẦU TỪ SAU NHỮNG DÒNG CODE
Với mục tiêu tạo thêm nhiều cơ hội cho các bạn sinh viên ngành CNTT có cơ hội cọ xát kiến thức đã học với thực tế công việc qua việc tương tác cùng các chuyên gia có nhiều năm kinh nghiệm làm việc trong lĩnh vực CNTT,
⭐ Anh Nguyễn Vũ Hưng - Chuyên viên hướng nghiệp, Mentor tại FUNIX, thành viên hội đồng quản trị IT Experts Club và Agile Viet Nam.
⭐ Anh Bùi Xuân Cảnh - Sinh viên K1 Đại học FPT, hiện đang là Quản trị dự án tại FPT Software - FPT Top 100 Excellent Person Of The Year
Cùng tới tham dự Talkshow, để được:
⭐ Có cơ hội trao đổi trực tiếp và giải đáp các thắc mắc, trăn trở về định hướng nghề nghiệp tương lai,
⭐ Được tìm hiểu và thực hành các kiến thức, kỹ năng cần thiết của một kỹ sư CNTT,
⭐ VỚI CÁC SINH VIÊN SẮP RA TRƯỜNG các bạn sẽ được thỏa sức trong những chia sẻ kinh nghiệm, trải nghiệm phỏng vấn, cách đàm phán lương, trả lời phỏng vấn và câu chuyện khởi đầu từ chính trải nghiệm của các diễn giả.
Thời gian: từ 19:00 thứ Năm, ngày 02/03/2017
Địa điểm: Hội trường tầng 1, Tòa nhà Beta - Đại học FPT.
Đối tượng tham gia: Cán bộ, Giảng viên, Sinh viên ngành CNTT, trường Đại học FPT - cơ sở Hòa Lạc
Event link:
https://www.facebook.com/events/1851290055094563/
Mục đích:
Tài liệu này hướng dẫn các bước, cách chuẩn bị, techniques/tips cho một bài phát biểu. Áp dụng cho ngành IT (là chính)
Đối tượng:
Diễn giả
# Các buổi chia sẻ về IT/Công nghệ
# Đặc biệt là những diễn giả lần đầu phát biểu
Thuyết trình
Ban tổ chức sự kiện
MC sự kiện
Chia sẻ kinh nghiệm học/dạy cờ cùng con Nguyễn Vũ Kỳ Anh (U6)
Học cờ cùng con U6 https://www.slideshare.net/vuhung16plus/hoc-co-cung-con
Học cờ cùng con U7 https://www.slideshare.net/vuhung16plus/2018-hoc-co-cung-co-nguyen-vu-ky-anh-u7
Học cờ cùng con U8 https://www.slideshare.net/vuhung16plus/hoc-co-cung-con-nguyen-vu-ky-anh-u8/
Anti patterns in it project management. Speech at Agile Vietnam 2016 Conference.
20161016 Agile Vietnam Conference 2016
---
http://www.agilevietnam.org/conf/2016/index.html
https://www.facebook.com/events/892107294257261/
#agilevn16, #agilevietnam2016, #hanoi, #altplus
[AGILE VIETNAM CONFERENCE 2016] - A regional conference on Agile practices, software craftsmanship and organization improvement.
5 years in a row, Agile Vietnam has achieved numerous success and has impacted positively on the community. With that spirit, Agile Vietnam has been very proud to hold Agile Vietnam Conference 2016.
Agile Vietnam Conference 2016 aims to be the best and the biggest event held by Agile Vietnam Community with theme of "LEAPFROG" - with full of exciting activities including keynote speeches, workshops, contests, games, business matching, and networking.
Why you should come to Agile Vietnam 2016 Conference?
➡ Networking with top experts of the world
➡ Improve agile process and project outcomes
➡ Inspire your mind
➡ Exclusive opportunity for learning
➡ Attend a world-class conference
►►►DATE & VENUE: (HCMC - DANANG CITY - HANOI CAPITAL)
● 07:30 - 17:00, 14th October 2016, Hoa Sen University, Nguyen Van Trang, District 1, HCMC.
● 07:30 - 12:00, 15th October 2016, Bamboo Green Hotel 177 Tran Phu, Hai Chau, Danang.
● 07:00 - 17:00, 16th October 2016, Alt Plus Vietnam Company Limited, 31F Keangnam Ha Noi Landmark Tower 72, Lot E6 Pham Hung, Nam Tu Liem, Ha Noi.
►►►TICKET INFORMATION:
● Eventbrite: http://goo.gl/I8GFVC
● Ticket box:
- HCM: https://goo.gl/6fPbWD
- Ha Noi: https://goo.gl/3wk4Yv
- Da Nang: https://goo.gl/Gc2mtF
►►►More information: http://goo.gl/4K8EdQ
5. Fortran code : Hàm sóng bậc n ứng
với trị x bất kỳ
DOUBLE PRECISION FUNCTION ODHON(BETA,X,N)
PARAMETER (NFMAX=100)
COMMON/CONSTS/PIO4,PIO2,PI,SQRT2,SQRTN(NFMAX),SQRTNF(NFMAX)
DOUBLE PRECISION PIO4,PIO2,PI,SQRT2,SQRTN,SQRTNF
DOUBLE PRECISION BETA,X,BETAX
DOUBLE PRECISION PHIN,PHINM1,PHINM2
DOUBLE PRECISION ODHO0,ODHO1
INTEGER I,N
C
IF (N.EQ.0) THEN
ODHON=ODHO0(BETA,X)
ELSEIF (N.EQ.1) THEN
ODHON=ODHO1(BETA,X)
ELSE
BETAX=BETA*X
PHINM2=ODHO0(BETA,X)
PHINM1=ODHO1(BETA,X)
DO I=2,N
PHIN=(PHINM1*BETAX*SQRT2-SQRTN(I-1)*PHINM2)/SQRTN(I)
PHINM2 = PHINM1
PHINM1 = PHIN
ENDDO
ODHON=PHIN
ENDIF
C
END
10. Python : tăng hiệu suất công việc
#!/usr/bin/env python
import sys,os
#using the executable file in "run" directory Ra lệnh cho hệ thống
dir='run';os.chdir(dir) thực hiện chương trình
cmd = './odho < input'
#Data preparation
#default values of input parameters
print_init_values = 0
order_wave_function = 20
beta = 1.0 Chạy chương trình với các
xmin = -10 thông số mặc định
xmax = 10
nsp = 1000
ngh = 20
#Read variables from the command line, one by one:
...
failure = os.system(cmd)
if failure:
print 'running the code failed'; sys.exit(1)
11. Python : Thay đổi tham số trực tiếp
... trên dòng lệnh
#Read variables from the command line, one by one:
while len(sys.argv)>1:
option=sys.argv[1]; del sys.argv[1]
if option == '--print-init-values':
print_init_values=int(sys.argv[1]); del sys.argv[1]
elif option == '--order-wave-function':
order_wave_function =int(sys.argv[1]); del sys.argv[1]
elif option == '--beta':
beta =float(sys.argv[1]); del sys.argv[1]
elif option == '--xmin':
xmin =float(sys.argv[1]); del sys.argv[1]
elif option == '--xmax':
xmax =float(sys.argv[1]); del sys.argv[1]
elif option == '--number-sample-points':
nsp =int(sys.argv[1]); del sys.argv[1]
elif option == '--number-gh-sample-points':
ngh =int(sys.argv[1]); del sys.argv[1]
else:
print sys.argv[0],': invalid option',option
sys.exit(1)
#Make input file to the program
...
13. Python : Tạo dữ liệu đầu vào
...
#Make input file to the program
f = open('input','w')
f.write("""%(print_init_values)g #Print initialized values 0=No 1=Yes
%(order_wave_function)g #Order of the wave-function of Harmonical Oscillator
%(beta)g #beta = sqrt(m.omega/hbar) : harmonical oscillator parameter
%(xmin)g %(xmax)g #the domain of the function
%(nsp)g #number of sample points of the function
%(ngh)g #number of Gauss-Hermite sample points
""" % vars() )
f.close()
...
0 #Print initialized values 0=No 1=Yes
2 #Order of the wave-function of Harmonical Oscillator
0.4 #beta = sqrt(m.omega/hbar) : harmonical oscillator parameter
-10 10 #the domain of the function
1000 #number of sample points of the function
20 #number of Gauss-Hermite sample points
14. Python : Hiển thị bằng hình ảnh
...
kết quả tính toán
# make file with gnuplot commands:
gnuplotfile='phi_%i__beta_%g.gnuplot' % (order_wave_function,beta)
f = open(gnuplotfile,'w')
f.write("""reset Tạo tệp chứa lệnh vẽ cho gnuplot : phương pháp truyền thống
#
set title "Harmonical Oscillator Wave Function of order %(order_wave_function)g, beta=%(beta)g"
set xlabel "x(fm)"
set ylabel "fm^{-1/2}"
#
set xrange [%(xmin)g:%(xmax)g]
# Line width of the axes
set border linewidth 1.5
# Line styles
set style line 1 linecolor rgb '#0060ad' linetype 1 linewidth 2
set style line 2 linecolor rgb '#dd181f' linetype 1 linewidth 2
# make a plot in PNG format:
set term png small Tạo hình vẽ với đuôi .png
set output 'phi_%(order_wave_function)i__beta_%(beta)g.png';
plot "data" with lines linestyle 2 notitle
# define the postscript output format: Tích hợp thông tin tham số sử dụng
set term postscript enhanced 'Times-Roman' 20; vào tên tệp
set output 'phi_%(order_wave_function)i__beta_%(beta)g.ps';
set title "Harmonical Oscillator Wave Function of order %(order_wave_function)g, {/Symbol b}=%(beta)g"
plot "data" with lines linestyle 2 notitle
""" % vars() )
f.close()
# make plot
cmd = 'gnuplot -persist '+gnuplotfile
failure = os.system(cmd)
if failure:
print 'running gnuplot failed'; sys.exit(1)
...
16. Cải tiến
●
Chuyển dữ liệu đầu vào và đầu ra của một
tính '../odho vào cùng một thư mục
cmd =
toán < input'
...
caldir='tmp'
...
elif option == '--calcul-directory':
caldir =sys.argv[1]; del sys.argv[1]
...
import shutil
if os.path.isdir(caldir): #does caldir exist
shutil.rmtree(caldir) # yes, remove old directory
os.mkdir(caldir) #make caldir directory
os.chdir(caldir) #move to dir
...
17. Tính toàn bộ các trạng thái kích
thích từ 0 tới 100
#!/usr/bin/env python
import sys,os
for n in range(0,100):
cmd = "./odho_improved.py --beta 1.5 --order-wave-function %g
--number-sample-points 1000 --calcul-directory beta1.5n%g" %(n,n)
failure = os.system(cmd)
if failure:
print 'running gnuplot failed'; sys.exit(1)