sat-ppt.pptx
•Download as PPTX, PDF•
0 likes•5 views
This project aimed to design an antenna and transmitter module to detect low Earth orbit weather satellites like NOAA, track them, and download weather data using software-defined radio (SDR) technology. The student completed building the module and was able to receive satellite signals, capturing an image result and including a video link of the SDR in action receiving data from satellites.
Report
Share
Report
Share
Recommended
GSC-21_029_4_09_TSDSI-R1-1.pptx
This document discusses India's Smart Cities initiative and the role of standardization. It provides an overview of the Smart Cities Mission which aims to promote sustainable and inclusive cities. The strategy focuses on pan-city initiatives and area-based developments. It also discusses the city selection process, key pillars of development, ICT and non-ICT needs, budgets, and ongoing efforts to standardize IoT and ICT solutions for Smart Cities in India.
Paging.ppt
Paging is a memory management technique that allows a process to be allocated physical memory wherever it is available. It divides both physical memory and logical memory into fixed-sized blocks called frames and pages respectively. When a process runs, its pages are loaded into available free frames. A page table maps the logical addresses to physical frames and is used to translate logical addresses to physical addresses during execution. Address translation uses the page number as an index into the page table to find the physical frame number.
Page Replacement Algorithms.pptx
This document discusses page replacement algorithms in operating systems. When memory is full and a new page needs to be brought in, an existing page must be selected to remove from memory. Several algorithms are described for choosing a victim page, including first-in first-out (FIFO), least recently used (LRU), and second-chance. LRU aims to remove the least recently used page but is difficult to implement precisely. Variations like using reference bits and modified bits provide approximations to LRU. The optimal algorithm is also described but cannot be implemented since it requires knowledge of future page references.
Segmentation.ppt
Segmentation is a memory management scheme that supports the user view of memory as a collection of logical segments. Each segment represents a logical unit such as a main program, procedure, function, object, or variable. Segmentation maps logical addresses to physical addresses using a segment table with entries for the base and limit of each segment. Protection is provided by associating validation bits and access privileges with each segment table entry.
Allocating of Frames.pptx
The document discusses different approaches for allocating memory frames to processes in an operating system. It describes fixed allocation, where frames are allocated equally or proportionally based on process size. It also covers priority allocation and variations. Global replacement allows a process to replace frames belonging to any process, while local replacement restricts replacement to a process's own frames. The document introduces the concept of non-uniform memory access (NUMA) architectures and strategies for optimizing performance, such as scheduling processes on CPUs close to their allocated memory.
Contiguous Memory Allocation.ppt
Contiguous allocation is an early method for allocating main memory between the operating system and user processes. Each process is contained within a single contiguous section of memory. Relocation and limit registers are used to protect processes from each other and allow transient changes to the operating system. Multiple-partition allocation allocates variable sized partitions to processes out of memory holes. Storage allocation approaches like first-fit and best-fit are used to allocate partitions from the holes. Fragmentation can occur both externally and internally, taking up space that cannot be used.
Allocating Kernel Memory.pptx
Kernel memory is allocated differently than user memory. It is often allocated from a free memory pool and some kernel memory needs to be contiguous. The buddy system allocates memory from fixed-size segments of physically contiguous pages and satisfies requests by rounding them up to the next highest power of 2, then splitting chunks as needed. The slab allocator uses caches of pre-allocated objects to satisfy requests faster without fragmentation. Linux uses slab allocation, with structs like task_struct allocated from caches.
Deadlock Detection.pptx
The document discusses techniques for detecting and recovering from deadlocks in a system with multiple resource types. It describes maintaining a wait-for graph and using an algorithm that searches for cycles to detect deadlocks. The algorithm requires O(m*n^2) operations where m is the number of resource types and n is the number of processes. On detection, the system can either terminate deadlocked processes or preempt resources from other processes to break the deadlock cycle. Factors like priority, resources used, and interactiveness are considered to determine the order and cost of recovery.
Recommended
GSC-21_029_4_09_TSDSI-R1-1.pptx
This document discusses India's Smart Cities initiative and the role of standardization. It provides an overview of the Smart Cities Mission which aims to promote sustainable and inclusive cities. The strategy focuses on pan-city initiatives and area-based developments. It also discusses the city selection process, key pillars of development, ICT and non-ICT needs, budgets, and ongoing efforts to standardize IoT and ICT solutions for Smart Cities in India.
Paging.ppt
Paging is a memory management technique that allows a process to be allocated physical memory wherever it is available. It divides both physical memory and logical memory into fixed-sized blocks called frames and pages respectively. When a process runs, its pages are loaded into available free frames. A page table maps the logical addresses to physical frames and is used to translate logical addresses to physical addresses during execution. Address translation uses the page number as an index into the page table to find the physical frame number.
Page Replacement Algorithms.pptx
This document discusses page replacement algorithms in operating systems. When memory is full and a new page needs to be brought in, an existing page must be selected to remove from memory. Several algorithms are described for choosing a victim page, including first-in first-out (FIFO), least recently used (LRU), and second-chance. LRU aims to remove the least recently used page but is difficult to implement precisely. Variations like using reference bits and modified bits provide approximations to LRU. The optimal algorithm is also described but cannot be implemented since it requires knowledge of future page references.
Segmentation.ppt
Segmentation is a memory management scheme that supports the user view of memory as a collection of logical segments. Each segment represents a logical unit such as a main program, procedure, function, object, or variable. Segmentation maps logical addresses to physical addresses using a segment table with entries for the base and limit of each segment. Protection is provided by associating validation bits and access privileges with each segment table entry.
Allocating of Frames.pptx
The document discusses different approaches for allocating memory frames to processes in an operating system. It describes fixed allocation, where frames are allocated equally or proportionally based on process size. It also covers priority allocation and variations. Global replacement allows a process to replace frames belonging to any process, while local replacement restricts replacement to a process's own frames. The document introduces the concept of non-uniform memory access (NUMA) architectures and strategies for optimizing performance, such as scheduling processes on CPUs close to their allocated memory.
Contiguous Memory Allocation.ppt
Contiguous allocation is an early method for allocating main memory between the operating system and user processes. Each process is contained within a single contiguous section of memory. Relocation and limit registers are used to protect processes from each other and allow transient changes to the operating system. Multiple-partition allocation allocates variable sized partitions to processes out of memory holes. Storage allocation approaches like first-fit and best-fit are used to allocate partitions from the holes. Fragmentation can occur both externally and internally, taking up space that cannot be used.
Allocating Kernel Memory.pptx
Kernel memory is allocated differently than user memory. It is often allocated from a free memory pool and some kernel memory needs to be contiguous. The buddy system allocates memory from fixed-size segments of physically contiguous pages and satisfies requests by rounding them up to the next highest power of 2, then splitting chunks as needed. The slab allocator uses caches of pre-allocated objects to satisfy requests faster without fragmentation. Linux uses slab allocation, with structs like task_struct allocated from caches.
Deadlock Detection.pptx
The document discusses techniques for detecting and recovering from deadlocks in a system with multiple resource types. It describes maintaining a wait-for graph and using an algorithm that searches for cycles to detect deadlocks. The algorithm requires O(m*n^2) operations where m is the number of resource types and n is the number of processes. On detection, the system can either terminate deadlocked processes or preempt resources from other processes to break the deadlock cycle. Factors like priority, resources used, and interactiveness are considered to determine the order and cost of recovery.
Deadlock Prevention.pptx
Deadlocks can be prevented by ensuring that processes request resources in a way that avoids mutual exclusion, hold and wait conditions, and circular wait. Specifically, processes should request all resources needed before starting execution, only request additional resources when holding none, and request resources in a predefined total ordering to prevent circular waits. If a process requests a resource it cannot obtain, it will release any held resources and have its request preempted to avoid deadlock.
Frame detection.pdf
This lab aims to implement a frequency offset correction algorithm called Moose and a frame detection method using correlation. Students will study the performance of these algorithms by incorporating them in a receiver synchronization block. The lab covers the Moose algorithm, sliding correlation algorithm and procedures to test them over a real wireless link between a USRP transmitter and receiver. Students are asked questions about the impact of frequency offsets, properties of training sequences, and challenges faced in implementing the systems.
Deadlock Backgroud.pptx
This document discusses deadlocks in computer systems. It defines a deadlock as when a set of blocked processes each hold a resource and wait to acquire a resource held by another process, creating a circular wait. The document outlines methods to prevent, avoid, detect, and recover from deadlocks. These include deadlock prevention through proper resource allocation and deadlock recovery by undoing processes or preempting resources to break cycles in the resource allocation graph.
5G Hackathon - Brainstorming Session.pptx
This document announces a 5G and Beyond Hackathon in India to develop products and solutions relevant to 5G and beyond technologies. The hackathon is open to student teams and startups owned by Indian citizens. Applications are due by July 31, 2023 and should include details on the technical domain, product description, proof of concept materials, and how the solution qualifies as a 5G use case. The goal is to take innovations from the proof of concept stage to develop India-specific applications of 5G and beyond technologies.
LNA.ppt
The document describes the design process for a low noise amplifier (LNA) using the Microwave Office linear simulation software. It involves creating schematics of the LNA circuit, importing device models, setting design goals, running simulations, and tuning circuit elements. Key steps include adding a Fujitsu HEMT device, setting measurements and graphs to analyze S-parameters, gain, noise figure, and stability. Inductors are tuned to match the input for optimal gain and noise figure. An output matching circuit is then added and tuned to maximize overall gain across the target frequency band from 0.1-20GHz.
Lecture 4.pptx
This document discusses symmetric multiprocessors (SMP) and multicore computers. An SMP has two or more similar processors that share main memory and I/O devices, controlled by an integrated operating system. This allows parallel processing for improved performance and availability even if a processor fails. Additional processors can incrementally improve performance and scale the system. A multicore computer combines two or more processors called cores on a single chip, with each core having its own L1 and L2 caches, and sometimes sharing an L3 cache.
System Calls.ppt
This document discusses operating system concepts from the 9th edition of the textbook "Operating System Concepts" by Silberschatz, Galvin and Gagne. It covers topics such as system calls, types of system calls, system programs, operating system structures, debugging, and system boot. The key points are that system calls provide an interface for programs to request services from the operating system, there are different types of system calls for processes, files, devices etc., and system programs provide user interfaces and utilities for tasks like file management and programming support.
Lec 6 OS structure and Operations.ppt
This document provides an overview of operating system concepts from the 9th edition of the textbook "Operating System Concepts" by Silberschatz, Galvin and Gagne. It describes the structure and operations of operating systems, including how they control and coordinate the use of computer hardware among applications and users. The key components of an operating system are the kernel, system programs, applications, and users. Operating systems allocate resources, control program execution, and protect the system through dual-mode operation and interrupts.
cs-intro-os.ppt
The document provides an overview of operating systems, including:
1. An operating system acts as a virtual machine that hides complex hardware details and provides services through system calls. It manages resources like time and memory allocation.
2. Core OS functions include process management, I/O device control, resource access control, error handling, and accounting. The kernel contains frequently used functions and privileges.
3. Early systems used serial processing but evolved to batch processing, multiprocessing, time-sharing, and today's graphical user interfaces across networks.
Lecture-2 Signal-Spectra-Modulation.pptx
This document discusses different types of signals and their spectra. It describes analog signals as continuous over time, digital signals as discrete over both time and amplitude, and discrete signals as discrete over time but not amplitude. It defines a signal's spectrum as its frequency spectrum, which represents the signal in the frequency domain and can be generated via a Fourier transform, showing amplitude versus frequency.
Noise in AM systems.ppt
This chapter discusses the effect of noise on analog communication systems. It begins by introducing angle modulation systems and frequency modulation (FM), which can provide greater noise immunity than amplitude modulation (AM) systems, though they require more bandwidth. The chapter then examines the effects of noise on various AM systems, including double-sideband suppressed-carrier AM (DSB-SC AM), single-sideband AM (SSB AM), and conventional AM. It finds that DSB-SC AM and SSB AM do not provide any signal-to-noise ratio (SNR) improvement over a baseband system. The chapter also analyzes carrier phase estimation using a phase-locked loop and the effects of transmission loss and noise on analog communication systems
Lecture 22 Threshold effects in FM.pptx
The document discusses the threshold effect in FM receivers. As the carrier-to-noise ratio decreases at the discriminator input, the FM receiver will break down. First, individual clicks will be heard in the output. As the ratio decreases further, the clicks will rapidly merge into a crackling or sputtering sound. The threshold effect is defined as the minimum carrier-to-noise ratio that provides an output signal-to-noise ratio not less than predicted by the usual formula, assuming small noise power. Techniques like FM feedback, phase-locked loops, and frequency-locked loops can delay the onset of threshold effects.
Lecture-5 AM Signal Generation – Type 1.pptx
This document discusses amplitude modulation (AM) signal generation using a square law diode modulator (DSBFC). It provides the following key points:
- A square law modulator requires a means of summing the carrier and modulating waves, a nonlinear element (such as a diode or transistor), and a band pass filter to extract the desired modulation products.
- Using the square law approximation of a diode's power law characteristic, an AM signal can be generated by mixing the modulating signal with the carrier signal and filtering the output.
- Suppressing the carrier wave can save power in AM transmission - suppressing just the carrier saves 66.6% power, while suppressing the carrier and one sideband
Lecture-3 Need for Modulation.pptx
This document discusses the need for modulation and different types of modulation. It outlines several reasons why higher frequencies are needed for signal transmission, including that higher frequencies allow signals to travel farther distances and require smaller antenna heights. It also explains that modulation is needed to minimize interference between signals by assigning different carrier frequencies, and to adjust bandwidth to improve signal-to-noise ratio. Finally, it provides an overview of different categories of modulation techniques, including analog, digital, and pulse modulation, as well as some examples of techniques within each category.
Work on your potential.pptx
The document discusses how God sees our potential and how we can fulfill it through following the Holy Spirit's guidance. It states that the Spirit helps believers discover God's purpose for their lives and teaches them. It also says God uses failures, discipline, and obedience to mold us into Christ's likeness and perfect us for His destiny. Surrendering our lives to Christ is key to reaching our full potential.
Newton’s law and Orbital description.pptx
This document discusses Newton's laws of motion and orbital mechanics. It explains Newton's three laws of motion. It then discusses the centripetal force exerted by Earth on a satellite due to gravity, and the centrifugal force exerted by the sun and moon. Equations are provided for centripetal force, centrifugal force, orbital velocity, and angular velocity. Finally, example problems are given to calculate orbital velocity and period based on radius.
1.satellite communication.pptx
This document provides an overview of satellite communication basics, including different types of satellite orbits like polar, equatorial, and inclined orbits. It describes low earth orbit satellites that are 150-500 km from Earth and revolve every 90 minutes, as well as medium earth orbit satellites that are 9,500-19,000 km away and revolve every 5-12 hours. Geosynchronous satellites revolve with Earth's rotation at 35,786 km away, allowing 3 satellites to provide continuous coverage. The document also mentions uplink and downlink models and frequency bands used in satellite communication.
3.Orbital parameters & GEO.pptx
This document defines and describes various orbital parameters such as apogee, perigee, inclination angle, and eccentricity. It discusses the characteristics of different types of orbits including prograde, retrograde, circular, elliptical, polar, equatorial, geosynchronous, and geostationary orbits. Key factors that define satellite orbits like semi-major axis, argument of perigee, and right ascension of the ascending node are also outlined.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
More Related Content
More from infomerlin
Deadlock Prevention.pptx
Deadlocks can be prevented by ensuring that processes request resources in a way that avoids mutual exclusion, hold and wait conditions, and circular wait. Specifically, processes should request all resources needed before starting execution, only request additional resources when holding none, and request resources in a predefined total ordering to prevent circular waits. If a process requests a resource it cannot obtain, it will release any held resources and have its request preempted to avoid deadlock.
Frame detection.pdf
This lab aims to implement a frequency offset correction algorithm called Moose and a frame detection method using correlation. Students will study the performance of these algorithms by incorporating them in a receiver synchronization block. The lab covers the Moose algorithm, sliding correlation algorithm and procedures to test them over a real wireless link between a USRP transmitter and receiver. Students are asked questions about the impact of frequency offsets, properties of training sequences, and challenges faced in implementing the systems.
Deadlock Backgroud.pptx
This document discusses deadlocks in computer systems. It defines a deadlock as when a set of blocked processes each hold a resource and wait to acquire a resource held by another process, creating a circular wait. The document outlines methods to prevent, avoid, detect, and recover from deadlocks. These include deadlock prevention through proper resource allocation and deadlock recovery by undoing processes or preempting resources to break cycles in the resource allocation graph.
5G Hackathon - Brainstorming Session.pptx
This document announces a 5G and Beyond Hackathon in India to develop products and solutions relevant to 5G and beyond technologies. The hackathon is open to student teams and startups owned by Indian citizens. Applications are due by July 31, 2023 and should include details on the technical domain, product description, proof of concept materials, and how the solution qualifies as a 5G use case. The goal is to take innovations from the proof of concept stage to develop India-specific applications of 5G and beyond technologies.
LNA.ppt
The document describes the design process for a low noise amplifier (LNA) using the Microwave Office linear simulation software. It involves creating schematics of the LNA circuit, importing device models, setting design goals, running simulations, and tuning circuit elements. Key steps include adding a Fujitsu HEMT device, setting measurements and graphs to analyze S-parameters, gain, noise figure, and stability. Inductors are tuned to match the input for optimal gain and noise figure. An output matching circuit is then added and tuned to maximize overall gain across the target frequency band from 0.1-20GHz.
Lecture 4.pptx
This document discusses symmetric multiprocessors (SMP) and multicore computers. An SMP has two or more similar processors that share main memory and I/O devices, controlled by an integrated operating system. This allows parallel processing for improved performance and availability even if a processor fails. Additional processors can incrementally improve performance and scale the system. A multicore computer combines two or more processors called cores on a single chip, with each core having its own L1 and L2 caches, and sometimes sharing an L3 cache.
System Calls.ppt
This document discusses operating system concepts from the 9th edition of the textbook "Operating System Concepts" by Silberschatz, Galvin and Gagne. It covers topics such as system calls, types of system calls, system programs, operating system structures, debugging, and system boot. The key points are that system calls provide an interface for programs to request services from the operating system, there are different types of system calls for processes, files, devices etc., and system programs provide user interfaces and utilities for tasks like file management and programming support.
Lec 6 OS structure and Operations.ppt
This document provides an overview of operating system concepts from the 9th edition of the textbook "Operating System Concepts" by Silberschatz, Galvin and Gagne. It describes the structure and operations of operating systems, including how they control and coordinate the use of computer hardware among applications and users. The key components of an operating system are the kernel, system programs, applications, and users. Operating systems allocate resources, control program execution, and protect the system through dual-mode operation and interrupts.
cs-intro-os.ppt
The document provides an overview of operating systems, including:
1. An operating system acts as a virtual machine that hides complex hardware details and provides services through system calls. It manages resources like time and memory allocation.
2. Core OS functions include process management, I/O device control, resource access control, error handling, and accounting. The kernel contains frequently used functions and privileges.
3. Early systems used serial processing but evolved to batch processing, multiprocessing, time-sharing, and today's graphical user interfaces across networks.
Lecture-2 Signal-Spectra-Modulation.pptx
This document discusses different types of signals and their spectra. It describes analog signals as continuous over time, digital signals as discrete over both time and amplitude, and discrete signals as discrete over time but not amplitude. It defines a signal's spectrum as its frequency spectrum, which represents the signal in the frequency domain and can be generated via a Fourier transform, showing amplitude versus frequency.
Noise in AM systems.ppt
This chapter discusses the effect of noise on analog communication systems. It begins by introducing angle modulation systems and frequency modulation (FM), which can provide greater noise immunity than amplitude modulation (AM) systems, though they require more bandwidth. The chapter then examines the effects of noise on various AM systems, including double-sideband suppressed-carrier AM (DSB-SC AM), single-sideband AM (SSB AM), and conventional AM. It finds that DSB-SC AM and SSB AM do not provide any signal-to-noise ratio (SNR) improvement over a baseband system. The chapter also analyzes carrier phase estimation using a phase-locked loop and the effects of transmission loss and noise on analog communication systems
Lecture 22 Threshold effects in FM.pptx
The document discusses the threshold effect in FM receivers. As the carrier-to-noise ratio decreases at the discriminator input, the FM receiver will break down. First, individual clicks will be heard in the output. As the ratio decreases further, the clicks will rapidly merge into a crackling or sputtering sound. The threshold effect is defined as the minimum carrier-to-noise ratio that provides an output signal-to-noise ratio not less than predicted by the usual formula, assuming small noise power. Techniques like FM feedback, phase-locked loops, and frequency-locked loops can delay the onset of threshold effects.
Lecture-5 AM Signal Generation – Type 1.pptx
This document discusses amplitude modulation (AM) signal generation using a square law diode modulator (DSBFC). It provides the following key points:
- A square law modulator requires a means of summing the carrier and modulating waves, a nonlinear element (such as a diode or transistor), and a band pass filter to extract the desired modulation products.
- Using the square law approximation of a diode's power law characteristic, an AM signal can be generated by mixing the modulating signal with the carrier signal and filtering the output.
- Suppressing the carrier wave can save power in AM transmission - suppressing just the carrier saves 66.6% power, while suppressing the carrier and one sideband
Lecture-3 Need for Modulation.pptx
This document discusses the need for modulation and different types of modulation. It outlines several reasons why higher frequencies are needed for signal transmission, including that higher frequencies allow signals to travel farther distances and require smaller antenna heights. It also explains that modulation is needed to minimize interference between signals by assigning different carrier frequencies, and to adjust bandwidth to improve signal-to-noise ratio. Finally, it provides an overview of different categories of modulation techniques, including analog, digital, and pulse modulation, as well as some examples of techniques within each category.
Work on your potential.pptx
The document discusses how God sees our potential and how we can fulfill it through following the Holy Spirit's guidance. It states that the Spirit helps believers discover God's purpose for their lives and teaches them. It also says God uses failures, discipline, and obedience to mold us into Christ's likeness and perfect us for His destiny. Surrendering our lives to Christ is key to reaching our full potential.
Newton’s law and Orbital description.pptx
This document discusses Newton's laws of motion and orbital mechanics. It explains Newton's three laws of motion. It then discusses the centripetal force exerted by Earth on a satellite due to gravity, and the centrifugal force exerted by the sun and moon. Equations are provided for centripetal force, centrifugal force, orbital velocity, and angular velocity. Finally, example problems are given to calculate orbital velocity and period based on radius.
1.satellite communication.pptx
This document provides an overview of satellite communication basics, including different types of satellite orbits like polar, equatorial, and inclined orbits. It describes low earth orbit satellites that are 150-500 km from Earth and revolve every 90 minutes, as well as medium earth orbit satellites that are 9,500-19,000 km away and revolve every 5-12 hours. Geosynchronous satellites revolve with Earth's rotation at 35,786 km away, allowing 3 satellites to provide continuous coverage. The document also mentions uplink and downlink models and frequency bands used in satellite communication.
3.Orbital parameters & GEO.pptx
This document defines and describes various orbital parameters such as apogee, perigee, inclination angle, and eccentricity. It discusses the characteristics of different types of orbits including prograde, retrograde, circular, elliptical, polar, equatorial, geosynchronous, and geostationary orbits. Key factors that define satellite orbits like semi-major axis, argument of perigee, and right ascension of the ascending node are also outlined.
More from infomerlin (18)
Recently uploaded
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Recently uploaded (20)
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Data Control Language.pptx Data Control Language.pptx
Data Control Language.pptx Data Control Language.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
sat-ppt.pptx
- 1. DECODING SATELLITE IMAGES USING SDR STUDENT NAME : ROHAN ALFRED .A REG NO: URK20EC1045 GUIDE NAME: DR S MERLIN GILBERT RAJ
- 2. PROJECT OBJECTIVE The main objective of the project is to design an Antenna/Transmitter module to detect the LEO satellites like NOAA weather satellite to track and download the weather data. It’s all about how to use your computer or laptop to pick up radio signals from the earth and space using a fairly recent technology called SDR.
- 4. RESULTS • Image of the result • Video Link :-