Norton introduces a new abrasive range for centerless coil and glass polishing. W448 is made from aggregate technology where cork and silicon carbide grains are precisely structured and engineered to size, to create a consistent surface finish with improved belt life.
This document provides information on various acrylic foam tape products from AFTC, including:
- A table listing 21 different acrylic foam tape products for industrial applications with specifications for each.
- Descriptions of direct foam, transparent, general purpose, plastics, and low surface energy acrylic foam tape products, along with their product numbers.
- Tables listing heat activated acrylic foam tape products for automotive applications across 8 different series with specifications.
- Information on cleaner and primer products for acrylic foam tapes.
The document is an acrylic foam tape product brochure from AFTC providing specifications on their various tape products and intended applications.
This document provides information on Eclipse Magnetics' product range of permanent magnets and magnetic chucks. It summarizes Eclipse Magnetics' long history and expertise in magnetic product design and manufacturing. It then lists specifications for various rectangular and cylindrical bar magnets, button magnets, major/minor magnets, pocket magnets, power magnets, deep pot magnets, shallow pot magnets, neo-hold bi-pole magnets, magnetic feet, ferrite shallow pot magnets, heavy duty ferrite shallow pot magnets, magnetic discs, flexible magnets, marker magnets, and premier range magnetic chucks.
The document discusses optimizing foundation projects by addressing four key factors: 1) Optimising piling speed for different drilling depths and soil strata. 2) Piling fast and cost effectively. 3) Choosing the most cost effective deep shoring system. 4) Building basements waterproof while minimizing dewatering. It provides information on different piling and foundation techniques and emphasizes the importance of choosing the right drilling and cutting tools to pile fast and cost effectively depending on the soil strata.
The document provides information on identifying different types of fasteners used for corrosion and heat resistant applications. It discusses identifying male parts like bolts, screws and studs by quantity, diameter, thread pitch, length, drive type, description, material, finish and additional features. It also covers identifying female parts like nuts and washers, as well as U-bolts. Exotic grade fasteners for corrosion resistance, heat resistance and anti-galling properties are also described, including various alloys like Alloy C276, Alloy C22, Alloy 400 and Alloy 500. Reasons for choosing Nickel Systems for their inventory, experience and service are presented.
This document provides an overview of various dental laser devices used for both hard and soft tissues. It lists several laser models from different manufacturers including Biolase, Fotona, Elexxion, AMD, Pioon, Gigaalaser, Zolar, Woodpecker, Sirona, and Lazon. The lasers listed vary in their wavelength, average power output, and intended applications for hard or soft tissue treatments.
Norton introduces a new abrasive range for centerless coil and glass polishing. W448 is made from aggregate technology where cork and silicon carbide grains are precisely structured and engineered to size, to create a consistent surface finish with improved belt life.
This document provides information on various acrylic foam tape products from AFTC, including:
- A table listing 21 different acrylic foam tape products for industrial applications with specifications for each.
- Descriptions of direct foam, transparent, general purpose, plastics, and low surface energy acrylic foam tape products, along with their product numbers.
- Tables listing heat activated acrylic foam tape products for automotive applications across 8 different series with specifications.
- Information on cleaner and primer products for acrylic foam tapes.
The document is an acrylic foam tape product brochure from AFTC providing specifications on their various tape products and intended applications.
This document provides information on Eclipse Magnetics' product range of permanent magnets and magnetic chucks. It summarizes Eclipse Magnetics' long history and expertise in magnetic product design and manufacturing. It then lists specifications for various rectangular and cylindrical bar magnets, button magnets, major/minor magnets, pocket magnets, power magnets, deep pot magnets, shallow pot magnets, neo-hold bi-pole magnets, magnetic feet, ferrite shallow pot magnets, heavy duty ferrite shallow pot magnets, magnetic discs, flexible magnets, marker magnets, and premier range magnetic chucks.
The document discusses optimizing foundation projects by addressing four key factors: 1) Optimising piling speed for different drilling depths and soil strata. 2) Piling fast and cost effectively. 3) Choosing the most cost effective deep shoring system. 4) Building basements waterproof while minimizing dewatering. It provides information on different piling and foundation techniques and emphasizes the importance of choosing the right drilling and cutting tools to pile fast and cost effectively depending on the soil strata.
The document provides information on identifying different types of fasteners used for corrosion and heat resistant applications. It discusses identifying male parts like bolts, screws and studs by quantity, diameter, thread pitch, length, drive type, description, material, finish and additional features. It also covers identifying female parts like nuts and washers, as well as U-bolts. Exotic grade fasteners for corrosion resistance, heat resistance and anti-galling properties are also described, including various alloys like Alloy C276, Alloy C22, Alloy 400 and Alloy 500. Reasons for choosing Nickel Systems for their inventory, experience and service are presented.
This document provides an overview of various dental laser devices used for both hard and soft tissues. It lists several laser models from different manufacturers including Biolase, Fotona, Elexxion, AMD, Pioon, Gigaalaser, Zolar, Woodpecker, Sirona, and Lazon. The lasers listed vary in their wavelength, average power output, and intended applications for hard or soft tissue treatments.
This document provides specifications for the AVA5-50 coaxial cable, including its electrical and physical characteristics, operating parameters, packaging details, and certifications. Key details include that it is a 7/8 inch corrugated copper cable with 50 ohm impedance, black PE jacket, operating temperature range of -55°C to +85°C, minimum bend radius of 10 inches, and compliance with various industry standards like CENELEC, ROHS, and REACH-SVHC.
Elematic Cabling Systems produces a wide range of cable protection products such as wiring spirals, insulated tubing, heat shrinkable tubing. These products provide optimum chemical resistance, electrical insulation and protection of cables in different applications and industrial installations. Products include polyethylene spirals, braided sleeves in materials like polyester, polyamide and flame retardant PBT, as well as PVC tubing sleeves. These cable protection solutions satisfy cable installation needs across industries.
12 tic insert liners double the service lifeFernando Zhang
Why is TIC Liner more wearable?
A. The structure and properties of the matrix of the parts have changed. We have increased the content of Mn, Mo, and rare earth.
Therefore, the metallographic grain size of Hadfield steel is refined and the strength is enhanced.
B. The hardness of TIC Insert exceeds HRC60, and the hardness is about 3 times that of Hadfield steel!
The arrangement of Fine Chamber is almost the same as that of rough Chamber. According to the structure of the casting, Feed Size, make some small adjustments, there is no major change.
C. TIC Insert is a mesh-like structure, which is divided into points on the wear part, so as to achieve the purpose of improving the wear resistance of the part as a whole.
For TIC design, our engineers once again improved the design based on the wear curve of the parts you provided.
The size of the ore entering the Fine Chamber is very small, so we reduced the diameter and arrangement spacing of the TIC in order to obtain the best wear effect.
I share these ideas with you to let you fully understand the in-depth research we have done in this project.
Every new project is full of challenges and unknowns, but we are willing to challenge some interesting & valuable projects together with new customer.
How to solve the problem of excessive wear on both ends of Jaw liners? This is a classic case
One of our customers is in Shandong Province, China, and they have 2 crushers to crush iron ore.
One is 36X48 Jaw Crusher
One is 42X54 Jaw Crusher
We are told by customers that when they use OEM Liners, both ends of the Liners wear out very quickly! So productivity quickly dropped.
We filled the two ends of the teeth for our customers, and inlaid a lot of TIC Inserts at both ends.
The service life of the improved Liners is 3.68 times that of OEM Liners!
The customer was very satisfied with this and gave BOGVIK all their orders for Liners from dozens of sites in China
Gopani’s Clarywound 3X wound cartridge filter comes with three times more filtration efficiency than a standard wound filter cartridge. Clarywound 3X cartridges are manufactured by proprietary CNC machining process to construct a true multi-layered micronic gradient, spread across a combination of five different cartridges. This results in higher dirt holding capacity, longer life with filtration load and consistent performance. 3X dirt holding capacity, 3X filter life and 3X savings.
This document is a selector guide for conductive compounds from Chomerics including conductive coatings, adhesives, and sealants/gap fillers. It provides information on various product lines including product filler material, resin type, specifications, cure schedules, and typical applications. The guide contains specifications for over 30 different conductive compound products.
USTEK is a printed circuit board manufacturer founded in 1987. It sources boards worldwide while combining offshore pricing with local service. USTEK is certified to various quality and environmental standards. It produces boards for industries like instrumentation, power, lighting, consumer, and medical. Services include design support, rapid prototyping, and logistics coordination. USTEK aims to satisfy customers through competitive pricing, on-time delivery, and technical support.
Techfluid manufactures our own bonded rubber Mud, Cement and Tensioner hoses with spirally laid high tensile steel cable reinforcement and one-piece bonded in end couplings. The hoses are mandrel built in continuous lengths up to 70 metres and vulcanised to form a fully bonded hose offering high integrity and excellent flexibility. Our range covers pressures up to 15,000psi in sizes up to 16”.
This document provides information on the rigid PCB, flex PCB, and metal core PCB manufacturing capabilities of Rayming PCB Manufacturer. Key details include supported layer counts, board sizes, thickness, trace width and spacing minimums, hole sizes and tolerances, copper weights, and electrical and mechanical testing specifications for each PCB type. Contact information is provided for sales inquiries.
The document is a catalog from Nortec AMI Ltd., which provides thermal transfer label solutions for various applications. Nortec has many years of experience in identification solutions and ISO certification. The catalog showcases Nortec's label products for applications like PCB/components, wire and cable, security, and more. It provides details on available label sizes, materials, temperature ranges, and part numbers to meet customers' identification needs.
Vibrafoam provides effective protection against vibration and shock. This High-tech polyurethane elastomer can be used as two-dimensional matting for decoupling components, as a blank according to the respective component geometry or as custom-made molding. We offer a wide range of 13 standard materials and also offer the possibility to produce special types in various colours and thicknesses to suit your requirements
Inspired Noise UK Vibrafoam provides effective protection against vibration and shock. This High-tech polyurethane elastomer can be used as two-dimensional matting for decoupling components, as a blank according to the respective component geometry or as custom-made moulding. We offer a wide range of 13 standard materials and also offer the possibility to produce special types in various colours and thicknesses to suit your requirements.
Vibrafoam provides effective protection against vibration and shock. This High-tech polyurethane elastomer can be used as two-dimensional matting for decoupling components, as a blank according to the respective component geometry or as custom-made molding. We offer a wide range of 13 standard materials and also offer the possibility to produce special types in various colours and thicknesses to suit your requirements
The document contains technical construction plans and specifications for a steel structure. It includes dimensions, materials, and connection details for steel beams, columns, plates and bolts. Notes provide requirements for steel grade, bolt type, dimensions and level checks to be performed by the contractor.
HexPly 8552 is a high-performance epoxy matrix composite material suitable for use in aerospace structures. It exhibits good impact resistance, damage tolerance, and elevated temperature performance up to 250°F. HexPly 8552 is supplied with carbon or glass fibers in unidirectional or woven fabrics with an amine-cured epoxy resin matrix. It has excellent mechanical properties and allows for controlled resin flow during processing.
Inconel 718 is a nickel-chromium alloy that offers high tensile and creep strength at elevated temperatures up to 1200°F. It has resistance to corrosion and is used in applications in aeronautics, gas turbines, and other industries. The document provides details on the chemical composition, physical and mechanical properties of Inconel 718.
The document introduces Dow Corning's new line of phenyl-fluoro siloxane copolymer lubricants. These lubricants offer improved thermal stability and wear resistance compared to traditional silicone lubricants due to their copolymer structure. Grease and fluid formulations were developed with different phenyl-fluoro ratios to balance thermal stability and wear performance. Testing showed the copolymer lubricants outperformed polyol ester and PFPE lubricants in high temperature performance, corrosion resistance, and wear resistance. The new Molykote G-900x grease series was highlighted as a competitive alternative to PFPE lubricants for applications from -35°C to 220°C.
Hydraulic BOP Flameguard 5000 range is a hydraulic control hose that operates whilst exposed directly to fire for a minimum of 5 minutes ensuring all well control operations can be effective in an emergency situation.
Fire Rated/Deluge Flameguard 300 selection is design for emergency situations where operation must continue in fire conditions. Our fire rated range is utilised on offshore installations, the hose will operate in a fire for a minimum of 30 minutes offering platform personnel an escape route in emergency situations.
The document discusses Bowman International's new range of plain bearings called BowMet that are manufactured from a proprietary material called ToughMet spinodal bronze. BowMet bearings offer higher load capacity and greater heat, speed, and corrosion resistance compared to other plain bearings, resulting in significantly longer life. The bearings can be used across a wide range of industries and applications, from heavy machinery to aircraft and marine uses. The manufacturing process using rolling gives very low waste and is more cost effective than machined alternatives.
Rack and Pinion actuators often offer the most economical solution for quarter-turn valves that have a fairly constant torque requirement throughout the stroke.
Apollo 100W LED High Bay in Elite SemiconductorKinsley Feng
Using only the highest quality components, the Apollo led high bay for industrial or commercial applications where reliability and performance are Critical as the bulb maintenance is difficult or impossible, not to say the high cost.
Every component of the Apollo LED High Bay(http://www.elitesemicon.com/cp02.asp?t1=115) has been carefully engineered to provide the most reliable performance and bring across many benefits of utilizing solid state lighting technology in industrial applications.
Pyrex 7740 glass is Corning's trade name borosilicate glass. Because of its low coefficient of thermal expansion, the material is useful in high temperature applications, and is also heat shock resistant.
At Swagelok, we offer 22 different hose type with 89 different end connections So How to select the Right Hose with the Right End Connection? Just to keep your processes performing safely and cost effectively. Let’s take a look a this video.
This document provides specifications for the AVA5-50 coaxial cable, including its electrical and physical characteristics, operating parameters, packaging details, and certifications. Key details include that it is a 7/8 inch corrugated copper cable with 50 ohm impedance, black PE jacket, operating temperature range of -55°C to +85°C, minimum bend radius of 10 inches, and compliance with various industry standards like CENELEC, ROHS, and REACH-SVHC.
Elematic Cabling Systems produces a wide range of cable protection products such as wiring spirals, insulated tubing, heat shrinkable tubing. These products provide optimum chemical resistance, electrical insulation and protection of cables in different applications and industrial installations. Products include polyethylene spirals, braided sleeves in materials like polyester, polyamide and flame retardant PBT, as well as PVC tubing sleeves. These cable protection solutions satisfy cable installation needs across industries.
12 tic insert liners double the service lifeFernando Zhang
Why is TIC Liner more wearable?
A. The structure and properties of the matrix of the parts have changed. We have increased the content of Mn, Mo, and rare earth.
Therefore, the metallographic grain size of Hadfield steel is refined and the strength is enhanced.
B. The hardness of TIC Insert exceeds HRC60, and the hardness is about 3 times that of Hadfield steel!
The arrangement of Fine Chamber is almost the same as that of rough Chamber. According to the structure of the casting, Feed Size, make some small adjustments, there is no major change.
C. TIC Insert is a mesh-like structure, which is divided into points on the wear part, so as to achieve the purpose of improving the wear resistance of the part as a whole.
For TIC design, our engineers once again improved the design based on the wear curve of the parts you provided.
The size of the ore entering the Fine Chamber is very small, so we reduced the diameter and arrangement spacing of the TIC in order to obtain the best wear effect.
I share these ideas with you to let you fully understand the in-depth research we have done in this project.
Every new project is full of challenges and unknowns, but we are willing to challenge some interesting & valuable projects together with new customer.
How to solve the problem of excessive wear on both ends of Jaw liners? This is a classic case
One of our customers is in Shandong Province, China, and they have 2 crushers to crush iron ore.
One is 36X48 Jaw Crusher
One is 42X54 Jaw Crusher
We are told by customers that when they use OEM Liners, both ends of the Liners wear out very quickly! So productivity quickly dropped.
We filled the two ends of the teeth for our customers, and inlaid a lot of TIC Inserts at both ends.
The service life of the improved Liners is 3.68 times that of OEM Liners!
The customer was very satisfied with this and gave BOGVIK all their orders for Liners from dozens of sites in China
Gopani’s Clarywound 3X wound cartridge filter comes with three times more filtration efficiency than a standard wound filter cartridge. Clarywound 3X cartridges are manufactured by proprietary CNC machining process to construct a true multi-layered micronic gradient, spread across a combination of five different cartridges. This results in higher dirt holding capacity, longer life with filtration load and consistent performance. 3X dirt holding capacity, 3X filter life and 3X savings.
This document is a selector guide for conductive compounds from Chomerics including conductive coatings, adhesives, and sealants/gap fillers. It provides information on various product lines including product filler material, resin type, specifications, cure schedules, and typical applications. The guide contains specifications for over 30 different conductive compound products.
USTEK is a printed circuit board manufacturer founded in 1987. It sources boards worldwide while combining offshore pricing with local service. USTEK is certified to various quality and environmental standards. It produces boards for industries like instrumentation, power, lighting, consumer, and medical. Services include design support, rapid prototyping, and logistics coordination. USTEK aims to satisfy customers through competitive pricing, on-time delivery, and technical support.
Techfluid manufactures our own bonded rubber Mud, Cement and Tensioner hoses with spirally laid high tensile steel cable reinforcement and one-piece bonded in end couplings. The hoses are mandrel built in continuous lengths up to 70 metres and vulcanised to form a fully bonded hose offering high integrity and excellent flexibility. Our range covers pressures up to 15,000psi in sizes up to 16”.
This document provides information on the rigid PCB, flex PCB, and metal core PCB manufacturing capabilities of Rayming PCB Manufacturer. Key details include supported layer counts, board sizes, thickness, trace width and spacing minimums, hole sizes and tolerances, copper weights, and electrical and mechanical testing specifications for each PCB type. Contact information is provided for sales inquiries.
The document is a catalog from Nortec AMI Ltd., which provides thermal transfer label solutions for various applications. Nortec has many years of experience in identification solutions and ISO certification. The catalog showcases Nortec's label products for applications like PCB/components, wire and cable, security, and more. It provides details on available label sizes, materials, temperature ranges, and part numbers to meet customers' identification needs.
Vibrafoam provides effective protection against vibration and shock. This High-tech polyurethane elastomer can be used as two-dimensional matting for decoupling components, as a blank according to the respective component geometry or as custom-made molding. We offer a wide range of 13 standard materials and also offer the possibility to produce special types in various colours and thicknesses to suit your requirements
Inspired Noise UK Vibrafoam provides effective protection against vibration and shock. This High-tech polyurethane elastomer can be used as two-dimensional matting for decoupling components, as a blank according to the respective component geometry or as custom-made moulding. We offer a wide range of 13 standard materials and also offer the possibility to produce special types in various colours and thicknesses to suit your requirements.
Vibrafoam provides effective protection against vibration and shock. This High-tech polyurethane elastomer can be used as two-dimensional matting for decoupling components, as a blank according to the respective component geometry or as custom-made molding. We offer a wide range of 13 standard materials and also offer the possibility to produce special types in various colours and thicknesses to suit your requirements
The document contains technical construction plans and specifications for a steel structure. It includes dimensions, materials, and connection details for steel beams, columns, plates and bolts. Notes provide requirements for steel grade, bolt type, dimensions and level checks to be performed by the contractor.
HexPly 8552 is a high-performance epoxy matrix composite material suitable for use in aerospace structures. It exhibits good impact resistance, damage tolerance, and elevated temperature performance up to 250°F. HexPly 8552 is supplied with carbon or glass fibers in unidirectional or woven fabrics with an amine-cured epoxy resin matrix. It has excellent mechanical properties and allows for controlled resin flow during processing.
Inconel 718 is a nickel-chromium alloy that offers high tensile and creep strength at elevated temperatures up to 1200°F. It has resistance to corrosion and is used in applications in aeronautics, gas turbines, and other industries. The document provides details on the chemical composition, physical and mechanical properties of Inconel 718.
The document introduces Dow Corning's new line of phenyl-fluoro siloxane copolymer lubricants. These lubricants offer improved thermal stability and wear resistance compared to traditional silicone lubricants due to their copolymer structure. Grease and fluid formulations were developed with different phenyl-fluoro ratios to balance thermal stability and wear performance. Testing showed the copolymer lubricants outperformed polyol ester and PFPE lubricants in high temperature performance, corrosion resistance, and wear resistance. The new Molykote G-900x grease series was highlighted as a competitive alternative to PFPE lubricants for applications from -35°C to 220°C.
Hydraulic BOP Flameguard 5000 range is a hydraulic control hose that operates whilst exposed directly to fire for a minimum of 5 minutes ensuring all well control operations can be effective in an emergency situation.
Fire Rated/Deluge Flameguard 300 selection is design for emergency situations where operation must continue in fire conditions. Our fire rated range is utilised on offshore installations, the hose will operate in a fire for a minimum of 30 minutes offering platform personnel an escape route in emergency situations.
The document discusses Bowman International's new range of plain bearings called BowMet that are manufactured from a proprietary material called ToughMet spinodal bronze. BowMet bearings offer higher load capacity and greater heat, speed, and corrosion resistance compared to other plain bearings, resulting in significantly longer life. The bearings can be used across a wide range of industries and applications, from heavy machinery to aircraft and marine uses. The manufacturing process using rolling gives very low waste and is more cost effective than machined alternatives.
Rack and Pinion actuators often offer the most economical solution for quarter-turn valves that have a fairly constant torque requirement throughout the stroke.
Apollo 100W LED High Bay in Elite SemiconductorKinsley Feng
Using only the highest quality components, the Apollo led high bay for industrial or commercial applications where reliability and performance are Critical as the bulb maintenance is difficult or impossible, not to say the high cost.
Every component of the Apollo LED High Bay(http://www.elitesemicon.com/cp02.asp?t1=115) has been carefully engineered to provide the most reliable performance and bring across many benefits of utilizing solid state lighting technology in industrial applications.
Pyrex 7740 glass is Corning's trade name borosilicate glass. Because of its low coefficient of thermal expansion, the material is useful in high temperature applications, and is also heat shock resistant.
At Swagelok, we offer 22 different hose type with 89 different end connections So How to select the Right Hose with the Right End Connection? Just to keep your processes performing safely and cost effectively. Let’s take a look a this video.
The patented Flow Technology DC-I Series positive displacement flow meters (PD Meter) are ideal for a wide variety of liquid flow applications. These applications include, but are not limited to, paints, resins, petrochemicals, lubricants, fuels, polyurethanes and adhesives. These flow meters are both highly accurate and easily adaptable to most industrial applications.
This document provides information about copper mould tubes produced by Beijing Sino Equipment. Copper mould tubes are used in continuous casting machines to shape molten steel into billets as it passes through. Beijing Sino Equipment is a leading manufacturer of copper mould tubes in China, with over 20 years of experience. The document includes details on the manufacturing process, material types, product specifications, and sample testing conducted.
KOMEG Technology Industrial is famous for its KOMEG star brand of environmental test equipment in China since 1990. KOMEG has specialized in climatic test chambers, thermal shock test chambers, walk-in chambers, burn-in room and aging test chambers, drying ovens, salt spray testers, medical laboratory equipment etc.
For more info, please visit:http://www.komegtech.com
please contact: fiona@komegtech.com
The document provides specifications for several riflescopes, including magnification ranges, reticle types, focal plane types, parallax settings, turret adjustments, dimensions, and other details. Key specs highlighted are 1-8x, 3-12x, 2-12x, 3-18x, and 4.5-27x magnification ranges, with first focal plane optics, MOA and MRAD reticle options, adjustable parallax and illumination settings, and dimensions ranging from 10-14 inches in length.
Therminol 66 Synthetic Heat Transfer Fluid. Cotizado en Bolivares en Venezuela.
Therminol Venezuela.
Therminol 66 is the world’s most popular high temperature, liquid phase heat transfer fluid. Suitable for operation up to 650° F (345° C), Therminol 66 is pumpable to 27° F (-3° C) and delivers exceptional performance.
This document provides information about copper mould tubes produced by Beijing Sino Equipment. It discusses the manufacturing process, which involves melting, casting, hot and cold drawing, machining, plating, and quality control. Product details are given for square, rectangular, and round copper mould tubes in various sizes and specifications. The document also outlines the material types used, including E-Cu, SF-Cu, CuAg, and Cu-Cr-Zr, and their mechanical properties.
Similar to Samsung Techwin SBP-300WM1 Data Sheet (20)
The AI-1 is an 8-channel analog input module that can be installed in an Electro-Voice N8000 system. It features balanced inputs, 24-bit A/D conversion, and a dynamic range of 117dB. The module processes audio signals with 48-bit word length and provides additional analog inputs to the system with sampling at 48kHz and a delay of 1.375ms. It is installed by removing the rear panel blind, inserting the module, and securing it with screws.
The document describes a Samsung SMT-3232 32-inch LED monitor. It supports resolutions up to 1920 x 1080 with a contrast ratio of 5000:1 and response time of 8ms. It has video inputs including HDMI, DVI, VGA, and component. It has OSD display functions and optional VESA mounting and a stand. Dimensions are 721.4 x 420.3 x 49.9mm without the stand.
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
AI 101: An Introduction to the Basics and Impact of Artificial IntelligenceIndexBug
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
TrustArc Webinar - 2024 Global Privacy SurveyTrustArc
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!SOFTTECHHUB
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.