This document is a selector guide for conductive compounds from Chomerics including conductive coatings, adhesives, and sealants/gap fillers. It provides information on various product lines including product filler material, resin type, specifications, cure schedules, and typical applications. The guide contains specifications for over 30 different conductive compound products.
Using additives to drive coefficient of friction and wear reduction in plasticsmolykotetl
Plastics are increasingly replacing metals in many applications, offering a cheaper yet reliable alternative. Yet material replacement can lead to new lubrication challenges. Presented for the first time at the Polytrib conference in Slovenia, we share exciting new experimental evidence on the effectiveness of additives in both external and internal application.
See experimental results and comparative evidence of Dow Corning® silicone additives, such as Dow Corning® HMB-1103, Dow Corning® 50-011 and Dow Corning® 31-441 pellets and powders. Tested in a range of polyamide (PA) and polyoxymethylene (POM) applications results are compared against commonly used compounds, such as PFTE.
Interested in further information?
Join the discussion below and don’t forget to share the presentation through LinkedIn or Twitter by clicking the buttons below.
Shown for the first time at the VII Moscow International Lubricant Week, Molykote® experts present a new range of lubricants developed through the use of unique patented technology.
New silicone copolymer lubricants combine the thermal stability of phenyl siloxanes with the wear resistance of fluoro siloxanes to deliver increased wear resistance even at high temperatures. The balance of phenyl and fluoro groups can be adjusted to produce the ideal solution for each tribological challenge.
With high-temperature lubricity achieved, without sacrificing low-temperature operation, these new oils and greases function effectively in a wide range of temperatures (-35°C to 220°C) – delivering superior performance against ester based lubricants. With a lower density than PFPE lubricants, they offer lower cost-per-use and their wide additive acceptance delivers additional properties such as corrosion and oxidation resistance.
See the results of the research and development along with a direct comparison against a range of silicone, PFPE and ester based lubricants.
A wide range of applications are emerging as we work with industry to launch further ranges within this group. Contact your Molykote representative now to request a development sample.
How do Anti-Friction Coatings based on Binder Systems eliminate noise in auto...molykotetl
Presented at the 20th International Colloquium Tribology at the TAE, Esslingden in January 2016, Dr Manfred Jungk describes how antifriction coatings can eliminate noise in automotive interiors. Recently appointed to the board of the German Tribology Society, Molykote’s Dr Manfred Jungk has a passion for creative thinking that provides effective lubrication solutions to the automotive industry. His latest presentation demonstrates the innovative use of antifriction coatings to eliminate noise in automotive interiors with dry-film, plastic binding, high resistance, non-stick-slip coatings.
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8443-2 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 8.86mm
Maximum diameter seal 14.22mm
Cold shrink tube length 36mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
The new frontier in industrial lubricant research: the silicone copolymers.molykotetl
Think that silicone lubricants have reached their limitations? Think again. Siloxanes are sometimes dismissed due to their lower load bearing capacity, but new research from Molykote® from Dow Corning proves that altering the molecular structure of pendant groups can bring about a whole range of new properties, and applications, for the trusted silicone lubricant.
This presentation, made to the 83rd NLGI annual meeting in June 2016, provides a detailed overview of the research, development, benefits and applications of a new range of copolymer siloxanes.
Combining the excellent wear and friction protection properties of fluorosiloxanes with the high onset oxidation temperature afforded by phenylsiloxanes, the phenyl-fluoro copolymer makes use of both pendant groups, in varying ratios, to provide a range of lubricants each with their own application benefits.
The lubricants are fully compatible with additives offering further wear resistance, and the potential for a range of product substrates, such as greases.
Need a silicone lubricant with excellent metal-metal application? They are already here.
Developments in High Temperature Silicone Lubricationmolykotetl
MOLYKOTE presents a unique view of the future of silicone based lubricants. Based on new modelling techniques, MOLYKOTE is developing ranges of superior siloxanes and other silicone based fluids, that are changing the future outlook for industrial lubricants. Siloxanes are being developed with increased wear resistance, metal to metal application, even at high temperatures, temporary shear thinning and high traction properties. Originally presented at the SAE World Congress in Detroit, this presentation explores the leading edge of silicone research and the applications that are emerging.
Using additives to drive coefficient of friction and wear reduction in plasticsmolykotetl
Plastics are increasingly replacing metals in many applications, offering a cheaper yet reliable alternative. Yet material replacement can lead to new lubrication challenges. Presented for the first time at the Polytrib conference in Slovenia, we share exciting new experimental evidence on the effectiveness of additives in both external and internal application.
See experimental results and comparative evidence of Dow Corning® silicone additives, such as Dow Corning® HMB-1103, Dow Corning® 50-011 and Dow Corning® 31-441 pellets and powders. Tested in a range of polyamide (PA) and polyoxymethylene (POM) applications results are compared against commonly used compounds, such as PFTE.
Interested in further information?
Join the discussion below and don’t forget to share the presentation through LinkedIn or Twitter by clicking the buttons below.
Shown for the first time at the VII Moscow International Lubricant Week, Molykote® experts present a new range of lubricants developed through the use of unique patented technology.
New silicone copolymer lubricants combine the thermal stability of phenyl siloxanes with the wear resistance of fluoro siloxanes to deliver increased wear resistance even at high temperatures. The balance of phenyl and fluoro groups can be adjusted to produce the ideal solution for each tribological challenge.
With high-temperature lubricity achieved, without sacrificing low-temperature operation, these new oils and greases function effectively in a wide range of temperatures (-35°C to 220°C) – delivering superior performance against ester based lubricants. With a lower density than PFPE lubricants, they offer lower cost-per-use and their wide additive acceptance delivers additional properties such as corrosion and oxidation resistance.
See the results of the research and development along with a direct comparison against a range of silicone, PFPE and ester based lubricants.
A wide range of applications are emerging as we work with industry to launch further ranges within this group. Contact your Molykote representative now to request a development sample.
How do Anti-Friction Coatings based on Binder Systems eliminate noise in auto...molykotetl
Presented at the 20th International Colloquium Tribology at the TAE, Esslingden in January 2016, Dr Manfred Jungk describes how antifriction coatings can eliminate noise in automotive interiors. Recently appointed to the board of the German Tribology Society, Molykote’s Dr Manfred Jungk has a passion for creative thinking that provides effective lubrication solutions to the automotive industry. His latest presentation demonstrates the innovative use of antifriction coatings to eliminate noise in automotive interiors with dry-film, plastic binding, high resistance, non-stick-slip coatings.
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8443-2 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 8.86mm
Maximum diameter seal 14.22mm
Cold shrink tube length 36mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
The new frontier in industrial lubricant research: the silicone copolymers.molykotetl
Think that silicone lubricants have reached their limitations? Think again. Siloxanes are sometimes dismissed due to their lower load bearing capacity, but new research from Molykote® from Dow Corning proves that altering the molecular structure of pendant groups can bring about a whole range of new properties, and applications, for the trusted silicone lubricant.
This presentation, made to the 83rd NLGI annual meeting in June 2016, provides a detailed overview of the research, development, benefits and applications of a new range of copolymer siloxanes.
Combining the excellent wear and friction protection properties of fluorosiloxanes with the high onset oxidation temperature afforded by phenylsiloxanes, the phenyl-fluoro copolymer makes use of both pendant groups, in varying ratios, to provide a range of lubricants each with their own application benefits.
The lubricants are fully compatible with additives offering further wear resistance, and the potential for a range of product substrates, such as greases.
Need a silicone lubricant with excellent metal-metal application? They are already here.
Developments in High Temperature Silicone Lubricationmolykotetl
MOLYKOTE presents a unique view of the future of silicone based lubricants. Based on new modelling techniques, MOLYKOTE is developing ranges of superior siloxanes and other silicone based fluids, that are changing the future outlook for industrial lubricants. Siloxanes are being developed with increased wear resistance, metal to metal application, even at high temperatures, temporary shear thinning and high traction properties. Originally presented at the SAE World Congress in Detroit, this presentation explores the leading edge of silicone research and the applications that are emerging.
Molecular modelling, the future of lubrication research and developmentmolykotetl
Presented for the first time in the US at the SAE World Congress in Detroit, MOLYKOTE unveil a new technique for designing lubricants, based on molecular modelling. Providing an alternative to the old empirical method (which was based on outdated hydrocarbon data) this technique takes the molecular structure and relates it directly to rheological performance and tribofilm properties. A whole range of new silicone lubricants have already been developed using this method and the potential for future applications is vast.
Momentive has launched two new products, ECC3011 and ECC3051S conformal coatings that can withstand harsh operating conditions, helping to prevent the occurrence of corrosion on vital PCB components and surfaces.
AGC's newest additions to its adhesive-grade product lineup provide industry-leading performance across an expanded range of applications in the automotive, oil and gas, chemical, building and construction, packaging and electronics industries. Each is formulated for ease of use within its respective processing environment and is backed by AGC's longstanding reputation as a leading provider of functionalized adhesives.
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8443-6.5 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 8.86mm
Maximum diameter seal 14.22mm
Cold shrink tube length 132mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
Molecular modelling, the future of lubrication research and developmentmolykotetl
Presented for the first time in the US at the SAE World Congress in Detroit, MOLYKOTE unveil a new technique for designing lubricants, based on molecular modelling. Providing an alternative to the old empirical method (which was based on outdated hydrocarbon data) this technique takes the molecular structure and relates it directly to rheological performance and tribofilm properties. A whole range of new silicone lubricants have already been developed using this method and the potential for future applications is vast.
Momentive has launched two new products, ECC3011 and ECC3051S conformal coatings that can withstand harsh operating conditions, helping to prevent the occurrence of corrosion on vital PCB components and surfaces.
AGC's newest additions to its adhesive-grade product lineup provide industry-leading performance across an expanded range of applications in the automotive, oil and gas, chemical, building and construction, packaging and electronics industries. Each is formulated for ease of use within its respective processing environment and is backed by AGC's longstanding reputation as a leading provider of functionalized adhesives.
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8443-6.5 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 8.86mm
Maximum diameter seal 14.22mm
Cold shrink tube length 132mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8447-3.2 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 14mm
Maximum diameter seal 24.13mm
Cold shrink tube length 57mm
No tools or heat shrink gas torches required for installation of 3M cold shrink
Seals tight, retains resilience and pressure even after aging and exposure
Moisture resistant 3M silicone cold shrink
Cold shrink resists acids and alkalies
Resists ozone and UV ultraviolet light
Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8445-2.5 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 10.7mm
Maximum diameter seal 18.29mm
Cold shrink tube length 43mm
*No tools or heat shrink gas torches required for installation of 3M cold shrink
*Seals tight, retains resilience and pressure even after aging and exposure
*Moisture resistant 3M silicone cold shrink
*Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
*Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube.
3M Silicone Cold Shrink Tubes - LSF Low Smoke Zero Halogen for Low Voltage Cable Splices, Cable Repair & Insulation Protection
3M 8447-8 Silicone Rubber Cold Shrink Tubes
Minimum diameter seal 14mm
Maximum diameter seal 24.13mm
Cold shrink tube length 172mm
No tools or heat shrink gas torches required for installation of 3M cold shrink
Seals tight, retains resilience and pressure even after aging and exposure
Moisture resistant 3M silicone cold shrink
Cold shrink resists acids and alkalies
*Resists ozone and UV ultraviolet light
Fire resistant 3M silicone cold shrink tubings
3M Silicone Cold Shrink Applications
Primary electrical insulation of insulated wires and cable splices up to 1000 volts, insulation of electrical aircraft cables, suitable for indoor and outdoor applications, moisture sealing for high voltage (HV) air insulated cable connectors and cable lugs, insulation of secondary splices (copper and aluminium conductors), cable sheath repairs, insulation of line conductor transition connectors.
Flammability Testing of 3M Silicone Cold Shrink
3M Cold Shrink Insulators 8440 Series flammability testing was conducted with specimens positioned both vertically and horizontally per specification BSS 7230. The 3M silicone rubber cold shrink insulation passed the Flammability Test of BSS 7230 without supporting a flame. In addition, these cold shrink insulators were also subjected to a gas flame test as outlined in paragraph 4.4.15 of MIL-C-24643A and met the passing criteria as specified - no fuse was blown during the one hour flame exposure of the 3M Silicone Cold Shrink Tube
Zone 1 Lighting, Hazardous Area (ATEX) - Ex de - Petrel Beacon / Warning Light 610
Petrel hazardous area (ATEX certified) Zone 1 lighting is extensively specified for Ex de lighting applications - Petrel 610 Beacon/Warning Light features rotating beacon, xenon flashing unit, IIC as standard and integral EEx e terminal chamber.
Zone 1 hazardous area defines areas in which an explosive atmosphere caused by a mixture air and gases, vapours and mists is expected to occur occasionally.
Petrel Hazardous Area Zone 1 Lighting (ATEX) - Ex de
Petrel 610 Warning Beacon Light
Heavy duty versatile well glass for Zone 1 hazardous areas can be supplied with a range of light sources from flashing xenon to rotating beacon. Petrel 610 warning beacon light is suitable for Zone 1 gas and dust environments - this ATEX luminaire features an integral terminal chamber, external earthing and fixed or pivot mounting brackets. Coloured glass versions of the hazardous area beacon light can be supplied - SIRA certified.
Hazardous Area, Zone 1 Certification : EEx de II 2 GD IIC T3 and T4
Zone 1 Lighting, Hazardous Area (ATEX) - Ex de - Petrel 610 Beacon / Warning Light
Benefits
Hazardous Area Gas Group IIC
Virtually indestructible marine grade construction
Low installation costs with integral 'e' terminal chamber (inexpensive glanding, loop in loop out cabling)
Options
Coloured glass
Internal or external reflectors
High ambient temperature versions
Wire guard
Pendant mount
Features
240v 50Hz Check for alternative voltages
-20°C to +70°C
Certified with elliptical lamps (lamps not provided) 50w, 70w, 110w SON-E and 70w SON-R 50w, 80w, 125w HPMV/MBF 25w SL or 20w PLCE 150w for Ex de Zone 1 hazardous area lighting.
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
Skye Residences | Extended Stay Residences Near Toronto Airportmarketingjdass
Experience unparalleled EXTENDED STAY and comfort at Skye Residences located just minutes from Toronto Airport. Discover sophisticated accommodations tailored for discerning travelers.
Website Link :
https://skyeresidences.com/
https://skyeresidences.com/about-us/
https://skyeresidences.com/gallery/
https://skyeresidences.com/rooms/
https://skyeresidences.com/near-by-attractions/
https://skyeresidences.com/commute/
https://skyeresidences.com/contact/
https://skyeresidences.com/queen-suite-with-sofa-bed/
https://skyeresidences.com/queen-suite-with-sofa-bed-and-balcony/
https://skyeresidences.com/queen-suite-with-sofa-bed-accessible/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-king-queen-suite-with-sofa-bed/
https://skyeresidences.com/2-bedroom-deluxe-queen-suite-with-sofa-bed-accessible/
#Skye Residences Etobicoke, #Skye Residences Near Toronto Airport, #Skye Residences Toronto, #Skye Hotel Toronto, #Skye Hotel Near Toronto Airport, #Hotel Near Toronto Airport, #Near Toronto Airport Accommodation, #Suites Near Toronto Airport, #Etobicoke Suites Near Airport, #Hotel Near Toronto Pearson International Airport, #Toronto Airport Suite Rentals, #Pearson Airport Hotel Suites
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
VAT Registration Outlined In UAE: Benefits and Requirementsuae taxgpt
Vat Registration is a legal obligation for businesses meeting the threshold requirement, helping companies avoid fines and ramifications. Contact now!
https://viralsocialtrends.com/vat-registration-outlined-in-uae/
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
[Note: This is a partial preview. To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Sustainability has become an increasingly critical topic as the world recognizes the need to protect our planet and its resources for future generations. Sustainability means meeting our current needs without compromising the ability of future generations to meet theirs. It involves long-term planning and consideration of the consequences of our actions. The goal is to create strategies that ensure the long-term viability of People, Planet, and Profit.
Leading companies such as Nike, Toyota, and Siemens are prioritizing sustainable innovation in their business models, setting an example for others to follow. In this Sustainability training presentation, you will learn key concepts, principles, and practices of sustainability applicable across industries. This training aims to create awareness and educate employees, senior executives, consultants, and other key stakeholders, including investors, policymakers, and supply chain partners, on the importance and implementation of sustainability.
LEARNING OBJECTIVES
1. Develop a comprehensive understanding of the fundamental principles and concepts that form the foundation of sustainability within corporate environments.
2. Explore the sustainability implementation model, focusing on effective measures and reporting strategies to track and communicate sustainability efforts.
3. Identify and define best practices and critical success factors essential for achieving sustainability goals within organizations.
CONTENTS
1. Introduction and Key Concepts of Sustainability
2. Principles and Practices of Sustainability
3. Measures and Reporting in Sustainability
4. Sustainability Implementation & Best Practices
To download the complete presentation, visit: https://www.oeconsulting.com.sg/training-presentations
Sustainability: Balancing the Environment, Equity & Economy
Compounds selector-guide
1. Chomerics
Conductive Compounds Selector Guide
Conductive adhesives, conductive sealants/gap fillers,
and conductive coatings
ENGINEERING YOUR SUCCESS.
aerospace
climate control
electromechanical
filtration
fluid & gas handling
hydraulics
pneumatics
process control
sealing & shielding
2. CHO-SHIELD® Conductive Coatings
Product Filler
Resin Type (Parts)
Mix Ratio by Weight
A:B or A:B:C
Specific
Gravity 4
g/mL
Max. Surface
Resistance 4
@
(Rec. Thickness 3
)
ohm/sq. (mils)
Min/Max.
Use Temp.
°F(°C)
Elevated Cure
Schedule
Time @ °F (°C)
RT Cure
Schedule
Time
Working
Life
Minutes
Shelf
Life
Months 5
Theoretical Coverage @
(Rec. Thickness 3
)
ft2
/g (mils)
m2
/g (µm)
VOC 2
g/L
Typical Application Comments
2044* Ni Acrylic (1) 1.2 1.000 (2)
-40/185
(-40/85)
10-20 min. @ RT+
0.75 hr. @ 150°F ± 10°F
(66°C ± 6°C)
24 hr. n/a 9
0.027 (2)
0.0082 (51)
755
Plastic enclosure shielding
Solvent sensitive
Commercial grade
2056*
Ag/Cu
& Ag
Acrylic (1) 1.1 0.030 (1)
-40/212
(-40/100)
10-20 min. @ RT+
0.5 hr. @ 150°F ± 10°F
(66°C ± 6°C)
24 hr. n/a 12
0.047 (1)
0.0044 (25)
718
Plastic enclosure shielding
Solvent sensitive
Commercial grade; black version available
2040* Ag Acrylic (1) 1.3 0.025 (1)
-40/185
(-40/85)
10-20 min. @ RT+
0.5 hr. @ 150°F ± 10°F
(66°C ± 6°C)
24 hr. n/a 12
0.054 (1)
0.0165 (25)
741
Life sciences
electronic housings
Solvent sensitive
Commercial grade. For an Ag filled aerosol acrylic,
use CHO-SHIELD 4900
610* Ag/Cu
Epoxy (2)
A:B 100:28.25
1.2 0.150 (2)
-85/257
(-65/125)
2 hr. @ RT +
4 hr.@ 175°F (79°C)
1 week 480 9
0.060 (2)
0.0056 (51)
591
Corrosion
resistance
Corrosion protection
571 Ag
Epoxy (2)
A:B 100:10.9
1.58 0.010 (1)
-40/257
(-40/125)
15 min. @ R.T. + 60 min.
@ 149°F (65°C)
n/a 720 9
0.094 (1)
0.0087 (25)
308
Board level shielding for
semiconductor packages
Replaces stamped metal cans for board level
shielding, designed for high volume, precise
application in clean rooms
576* Ag
Epoxy (2)
A:B 100:27.5
1.8 0.060 (1)
-40/257
(-40/125)
2 hr. @ RT +
0.75 hr.@ 150°F (66°C) +
0.75 hr. @ 210°F (99°C)
1 week 480 9
0.110 (1)
0.0102 (25)
560 Plating applications
Provides selective platable conductive paths on
dielectric plastic substrates
596* Ag
Epoxy (2)
A:B 100:37
1.8 0.060 (1)
-40/302
(-40/150)
1 hr. @ 250°F (121°C) 1 week 480 9
0.110 (1)
0.0102 (25)
585
Protecting EMI flanges by
reducing dissimilar metal
concerns with EMI gaskets
Solvent, abrasion and high temperature
resistant; corrosion resistant
CHO-SHIELD 579 is a lower VOC version of
CHO-SHIELD 596
579 Ag
Epoxy (2)
A:B 100:32.9
1.7 0.060 (1)
-40/302
(-40/150)
30 min. RT + 1 hr. @
250°F (121°C)
1 week 480 9
0.110 (1)
0.012 (25)
376
Protecting EMI flanges by
reducing dissimilar metal
concerns with EMI gaskets
Solvent, abrasion and high temperature
resistant; corrosion resistant
Low VOC version of CHO-SHIELD 596
608 Ag Polyester (1) 1.4 0.015 (1)
-40/185
(-40/85)
15 min. @ R.T. +
60 min. @ 165°F (74°C)
n/a unlimited 9
0.148 (1)
0.138 (25)
711
Parts with complex
geometries
Flexible coating designed for thin applications
< 0.001” (0.0254 mm)
604 Ag Polyurethane (1) 1.3 0.010 (1)
-40/185
(-40/85)
15 min. @ R.T. +
30 min. @ 257°F (125°C)
n/a unlimited 9
0.047 (1)
0.0044 (25)
767
Board level shielding for
semiconductor packages
Highly conductive, advanced coating developed for
high volume, precise spray applications on circuit
boards and semiconductor packages
4994* Ag
Polyurethane (4)
A:B:C:D
100:18.33:
1.36:20.91
2.1 0.075 (1)
-40/185
(-40/85)
2 hr. RT & 40-60% RH +
2 hr. @ 130°F (55°C)
1 week 180 6
0.104 (3)
0.0097 (25)
596
Aircraft coatings;
grounding
Very smooth and very conductive;
long pot life; excellent sprayability
2001* Cu
Polyurethane (3)
A:B:C
100:10.06:41.96
1.6 0.100 (3)
-85/185
(-65/85)
2 hr. @ RT +
0.5 hr.@ 250°F (121°C)
1 week 120 9
0.029 (3)
0.0027 (76)
543
Protecting EMI flanges
Corrosion resistant coating
for extreme conditions
Corrosion protection; flange protection
Requires use of 1091 primer, sold separately.
2002* Cu
Polyurethane (3)
A:B:C
100:10.34:42.18
1.6 0.100 (3)
-85/185
(-65/85)
2 hr. @ RT +
0.5 hr.@ 250°F (121°C)
1 week 120 9
0.029 (3)
0.0027 (76)
540
Protecting EMI flanges
Corrosion resistant coating
for extreme conditions
Chromate free; flange protection
Requires use of 1091 primer, sold separately.
2003* Cu
Polyurethane (3)
A:B:C
100:10.06:41.96
1.6 0.100 (3)
-85/185
(-65/85)
2 hr. @ RT +
0.5 hr.@ 250°F (121°C)
1 week 120 9
0.029 (3)
0.0027 (76)
541
Protecting EMI flanges
Corrosion resistant coating
for extreme conditions
Darkened version of CHO-SHIELD 2001
Requires use of 1091 primer, included in kit
unless otherwise noted.
Conductive Compounds Selector Guide
* Hazardous shipping required. All compounds such as these should be packed and shipped by trained professionals.
Regulations vary by material type and by quantity. The information provided here is to be used as a general guideline only.
Primers are applied to the substrate prior to application of the conductive material. In no instance is the primer to be
mixed into the conductive material.
Chomerics ENGINEERING YOUR SUCCESS.
3. Product Filler
Resin Type (Parts)
Mix Ratio by Weight
A:B
Specific
Gravity 4
g/mL
Max. Vol.
Resistivity 3
ohm-cm
Min/Max.
Use Temp.
°F(°C)
Min. Lap
Shear4
psi
(kPa)
Elevated Cure
Schedule
Time @ °F (°C)**
RT Cure
Schedule
Time
Working
Life
Minutes 5
Shelf Life
Months
VOC 2
g/L
Typical Application Comments
CHO-BOND
584-29
Ag
Epoxy (2)
584:29 100:6.3
2.5 0.002
-67/257
(-55/125)
1200
(8274)
0.25 hr. @ 235°F
(113°C)
24 hr. 30 9 0
Bonding enclosures;
connnector shielding
General purpose; light paste; fast heat or RT cure; 0.025 - 0.127
mm bond lines; available in easy mix CHO-PAKs & SYRINGE-PAKs
May be sprayed by thinning with toluene. CHOBOND 584-29/tolu-
ene weight mix ratio is 100:150
CHO-BOND
584-208
Ag
Epoxy (2)
584:208 100:100
2.7 0.005
-80/210
(-62/99)
700
(4826)
0.75 hr. @ 212°F
(100°C)
24 hr. 60 9 0 Bonding enclosures
General purpose; medium paste; fast heat or RT cure;
Easy 1:1 mix ratio (wt.);
0.001” - 0.005” (0.025 - 0.127 mm) bond lines
CHO-BOND
580-208
Ag
Epoxy (2)
580:208 100:100
2.9 0.005
-80/210
(-62/99)
700
(4826)
0.75 hr. @ 212°F
(100°C)
24 hr. 60 9 0
Bus bar grounding for
shielded windows
May be sprayed by thinning with solvent. Solvent weight mix ratio
is 50:30:20, toluene:butanol:propanol, CHOBOND 580-208/solvent
weight mix ratio is 100:38
TECKNIT
8116*
Ag
Epoxy (2)
A:B 100:100
2.3 0.001
-80/212
(-62/100)
1400
(9653)
0.50 hr. @ 212°F
(100°C)
+ 24 hr. @ RT
1 week 1
45 15 32 Bonding enclosures Epoxy solder
CHO-BOND
360-20
Ag/Cu
Epoxy (2)
360:20 100:100
5.0 0.005
-80/212
(-62/100)
1600
(11032)
2.0 hr. @ 150°F
(66°C) 20
24 hr. 60 9 0
EMI gasket attachment;
bonding enclosures
General purpose; very thick paste; fast heat or RT cure;
Minimum bond line is .010” (0.254 mm)
CHO-BOND
1030*
Ag/Cu Silicone (1) 3.7 0.050
-67/392
(-55/200)
200
(1379)
n/a 1 week 1
30 6 0 EMI gasket attachment
Recommended bond line thickness: < 0.01” (0.25 mm);
Primer promotes adhesion. Recommended primer is 1086
CHO-BOND
1029*
Ag/Cu
Silicone (2)
A:B 100:250.3
3.0 0.060
-67/257
(-55/125)
450
(3103)
0.5 hr. @ 250°F
(121°C)
1 week 1
120 6 0 EMI gasket attachment
Recommended bond line thickness: < 0.008” (0.20 mm);
Primer promotes adhesion. Recommended primer is 1085
Adhesives Conductive Compounds Selector Guide
* Hazardous shipping required. All compounds such as these should be packed and shipped by trained professionals.
Regulations vary by material type and by quantity. The information provided here is to be used as a general guideline only.
** For alternate cure schedules contact Chomerics Applications Engineering.
Primers are applied to the substrate prior to application of the conductive material. In no instance is the primer to be
mixed into the conductive material.
Chomerics ENGINEERING YOUR SUCCESS.
4. Conductive Compounds Selector Guide
Product Filler
Resin Type (Parts)
Mix Ratio by Weight
A:B
Specific
Gravity 4
g/mL
Max. Vol.
Resistivity 4
ohm-cm
Min/Max.
Use Temp.
°F(°C)
Min. Lap
Shear4
psi
(kPa)
Elevated Cure
Schedule
Time @ °F (°C)
RT Cure
Schedule
Time
Working
Life
Minutes
Shelf Life
Months 5
VOC 2
g/L
Typical Application Comments
CHO-BOND
4660*
Ag/Cu
Polyisobutylene
(1)
2.0 0.080
-67/212
(-55/100)
n/a n/a 1 week 1
30 6 306 Sealing enclosure seams
Superior performance in vibration or shear. For
vertical seams or longer working life, use CHO-
BOND 4669.
TECKNIT
0005*
Ag/
glass
Polyolefin (1) 1.7 0.005
-40/185
(-40/85)
n/a n/a 24 hr. 30 9 418 Bonding enclosures Flexible thixotropic cream system
CHO-BOND
2165*
Cu
Polyurethane (2)
A:B 100:7.021
2.8 0.007
-80/212
(-62/100)
n/a
4.0 hr. @ RT +
0.5 hr. @ 257°F (125°C)
1 week 1
60 9 216 Airframe form-in-place sealing Corrosion resistant; paintable
TECKNIT
0002
Ag Silicone (1) 3.1 0.010
-74/399
(-59/204)
150
(1034)
n/a 72 hr.1
5 5.5 7 Bonding elastomer gaskets
Rec. bond line thickness:
0.005” - 0.25“ (- 0.13 mm - 6.35 mm);
flexible paste
CHO-BOND
1016*
Ni/C Silicone (1) 2.2 0.950
-67/257
(-55/125)
150
(1034)
n/a 1 week 1
9 6 0
Ideal in outdoor applications for
EMI shielding and low corrosion
Rec. bond line thickness:
> 0.007” (0.18 mm);
Primer promotes adhesion.
Recommended primer is 1086
CHO-BOND
1038*
Ag/Cu Silicone (1) 3.6 0.010
-67/257
(-55/125)
150
(1034)
n/a 1 week1
30 6 111
Sealing enclosure seams;
airframe gap sealing;
connector shielding
Rec. bond line thickness:
> 0.007” (0.18 mm);
Primer promotes adhesion.
Recommended primer is 1086
CHO-BOND 1121 is a solvent free version
CHO-BOND
1075*
Ag/Al Silicone (1) 2.0 0.010
-67/392
(-55/200)
175
(1207)
n/a 1 week1
30 6 0 Sealing enclosure seams
Rec. bond line thickness: > 0.010” (0.25 mm)
Primer promotes adhesion
Recommended primer is 1086
CHO-BOND
1035*
Ag/
glass
Silicone (1) 1.9 0.050
-67/392
(-55/200)
100
(689)
n/a 1 week 1
30 6 145 Sealing enclosure seams
Rec. bond line thickness: > 0.007” (0.18 mm)
Primer promotes adhesion
Recommended primer is 1086
Sealants/Gap Fillers
* Hazardous shipping required. All compounds such as these should be packed and shipped by trained professionals.
Regulations vary by material type and by quantity. The information provided here is to be used as a general guideline only.
Primers are applied to the substrate prior to application of the conductive material. In no instance is the primer to be
mixed into the conductive material.
Chomerics ENGINEERING YOUR SUCCESS.
5. Chomerics ENGINEERING YOUR SUCCESS.
* Requires the use of 1091 Primer.
Conductive Coatings - Ordering Information
Product
Weight
(grams)
Packaging
Chomerics
Part No.
Primer
Included
CHO-SHIELD 2044 3920 1 gallon aluminum can 52-03-2044-0000 Not Required
CHO-SHIELD 2056 4050 1 gallon aluminum can 52-03-2056-0000 Not Required
CHO-SHIELD 2040 4238 1 gallon aluminum can 52-03-2040-0000 Not Required
CHO-SHIELD 4900 122 6 fluid ounce aluminum aerosol can 52-02-4900-0000 Not Required
CHO-SHIELD 571 335 2 component, 1/2 pint aluminum can kit 52-01-0571-0000 Not Required
CHO-SHIELD 576 454 2 component, 1 pint aluminum can kit 52-01-0576-0000 Not Required
CHO-SHIELD 596
85 2 component, 1/2 pint aluminum can kit 52-00-0596-0000 Not Required
454 2 component, 1 pint aluminum can kit 52-01-0596-0000 Not Required
CHO-SHIELD 579 454 2 component, 1 pint aluminum can kit 52-01-0579-0000 Not Required
CHO-SHIELD 610 3750 1 gallon aluminum can 52-03-0610-0000 Not Required
CHO-SHIELD 608 1200 1 quart aluminum can 52-04-0608-0000 Not Required
CHO-SHIELD 4994
4 component, 1 quart aluminum can kit 52-04-4994-1000 Not Required
4 component, 1 gallon aluminum can kit 52-03-4994-1000 Not Required
CHO-SHIELD 604 295 1/2 pint aluminum can 52-01-0604-0000 Not Required
CHO-SHIELD
2001*
250 3 component, 1/2 pint aluminum can kit 52-00-2001-0000 No
250 3 component, 1/2 pint aluminum can "touch-up" kit 52-00-2001-1000 No
700 3 component, 1 pint aluminum can kit 52-01-2001-0000 No
1378 3 component, 1 quart aluminum can kit 52-04-2001-0000 No
CHO-SHIELD
2002*
250 3 component, 1/2 pint aluminum can kit 52-00-2002-0000 No
250 3 component, 1/2 pint aluminum can "touch-up" kit 52-00-2002-1000 No
700 3 component, 1 pint aluminum can kit 52-01-2002-0000 No
1378 3 component, 1 quart aluminum can kit 52-04-2002-0000 No
CHO-SHIELD
2003*
250 3 component, 1/2 pint aluminum can kit 52-00-2003-0000 1091
250 3 component, 1/2 pint aluminum can "touch-up" kit 52-00-2003-1000 No
700 3 component, 1 pint aluminum can kit 52-01-2003-0000 1091
1378 3 component, 1 quart aluminum can kit 52-04-2003-0000 1091
Adhesives - Ordering Information
Product
Weight
(grams)
Packaging
Chomerics Part
No.
Primer
Included
CHO-BOND 584-29
1 2 component, premeasured CHO-PAK 50-10-0584-0029 Not Required
2.5 2 component, premeasured CHO-PAK 50-02-0584-0029 Not Required
3 2 component, premeasured, 10 syringe kit 50-30-0584-0029 Not Required
10 2 component, premeasured CHO-PAK 50-03-0584-0029 Not Required
85 2 component, 4 fluid ounce polypropylene kit 50-00-0584-0029 Not Required
454 2 component, 8 fluid ounce polypropylene kit 50-01-0584-0029 Not Required
CHO-BOND 584-208
85 2 component, 4 fluid ounce polypropylene kit 50-00-0584-0208 Not Required
454 2 component, 16 fluid ounce polypropylene kit 50-01-0584-0208 Not Required
CHO-BOND 580-208
227 2 component, 8 fluid ounce polypropylene kit 50-05-0580-0208 Not Required
454 2 component, 16 fluid ounce polypropylene kit 50-01-0580-0208 Not Required
TECKNIT 8116 57 2 component, 2 fluid ounce polypropylene kit 72-08116 Not Required
CHO-BOND 360-20
85 2 component, 1/2 pint aluminum can kit 50-00-0360-0020 Not Required
454 2 component, 1 pint aluminum can kit 50-01-0360-0020 Not Required
CHO-BOND 1030
113.4 4 fluid ounce aluminum foil tube 50-02-1030-0000 1086
113.4 4 fluid ounce aluminum foil tube 50-02-1030-1000 No
454 6 fluid ounce SEMCO tube 50-01-1030-0000 1086
CHO-BOND 1029
85 4 fluid ounce aluminum foil tube 50-00-1029-0000 1085
454 6 fluid ounce SEMCO tube 50-01-1029-0000 1085
Conductive Compounds Selector Guide
continued on next page...
6. Chomerics ENGINEERING YOUR SUCCESS.
Sealants/Gap Fillers - Ordering Information
Product
Weight
(grams)
Packaging
Chomerics
Part No.
Primer
Included
CHO-BOND 4660
113.4 4 fluid ounce aluminum foil tube 51-02-4660-0000 Not Required
681 0.1 gallon fiber cartridge 51-05-4660-0000 Not Required
CHO-BOND 4669
113.4 4 fluid ounce aluminum foil tube 51-02-4669-0000 Not Required
681 0.1 gallon fiber cartridge 51-05-4669-0000 Not Required
TECKNIT 0005 227 1 pint aluminum can 72-00005 Not Required
CHO-BOND 2165*
454 2 component, 1/2 pint aluminum can kit 50-01-2165-0000 No
1135 2 component, 1pint aluminum can kit 50-02-2165-0000 No
2268 2 component, 1/2 pint aluminum can kit 50-04-2165-0000 No
CHO-BOND 1016
71 4 fluid ounce aluminum foil tube 50-02-1016-0000 1086
300 6 fluid ounce SEMCO tube 50-01-1016-0000 1086
CHO-BOND 1038
113.4 4 fluid ounce aluminum foil tube 50-02-1038-0000 1086
113.4 4 fluid ounce aluminum foil tube 50-02-1038-1000 No
454 6 fluid ounce SEMCO tube 50-01-1038-0000 1086
227 2.5 fluid ounce SEMCO tube 50-33-1038-0000 No
454 6 fluid ounce SEMCO tube 50-31-1038-0000 No
CHO-BOND 1121 454 6 fluid ounce SEMCO tube 50-01-1121-0000 No
CHO-BOND 1075
71 4 fluid ounce aluminum foil tube 50-02-1075-0000 1086
284 6 fluid ounce SEMCO tube 50-01-1075-0000 1086
CHO-BOND 1035
71 4 fluid ounce aluminum foil tube 51-00-1035-0000 1086
71 4 fluid ounce aluminum foil tube 51-00-1035-1000 No
284 6 fluid ounce SEMCO tube 51-01-1035-000 1086
Primer - Ordering Information
Product
Weight
(grams)
Packaging
Chomerics
Part No.
CHO-BOND 1085 400 1 pint can 50-01-1085-0000
CHO-BOND 1086
10 3 dram glass vial 50-10-1086-0000
95 4 fluid ounce glass bottle 50-04-1086-0000
375 1 pint can 50-01-1086-0000
CHO-BOND 1091
95 4 fluid ounce glass bottle 50-00-1091-0000
375 8 fluid ounce plastic bottle 50-01-1091-0000
Conductive Compounds Selector Guide
* Requires the use of 1091 Primer.