This document summarizes Segula Technologies' presence and operations in Russia. It states that Segula has 4 offices and over 65 experts located in Moscow, Togliatti, Kaluga, and Ludinovo. It then lists Segula's portfolio of customers in key industries like automotive, aeronautics, and railway in Russia. The management team is introduced and Segula's projects in automotive are summarized, including work with Renault and AvtoVAZ on various production lines and processes.
Evolution of Vehicle aftter it has been released, How its made and managedSamuel Festus
a research project based on the theme: Evolution of vehicle after it has been released, how it’s made, and how it’s managed.
Focusing on the Renault system design used in the manufacturing of Automotive and also Serial life management.
Delivery of the First POD to Europe... Achieved with Flying ColorsBrittany Berryman
In the 4th Quarter Edition of Technically Speaking, G-CON's Director of Engineering and Project Management, Mark Taylor discusses the execution, challenges and success of G-CON's first POD delivery in Europe and the collaborations that made it happen.
Evolution of Vehicle aftter it has been released, How its made and managedSamuel Festus
a research project based on the theme: Evolution of vehicle after it has been released, how it’s made, and how it’s managed.
Focusing on the Renault system design used in the manufacturing of Automotive and also Serial life management.
Delivery of the First POD to Europe... Achieved with Flying ColorsBrittany Berryman
In the 4th Quarter Edition of Technically Speaking, G-CON's Director of Engineering and Project Management, Mark Taylor discusses the execution, challenges and success of G-CON's first POD delivery in Europe and the collaborations that made it happen.
Sommaire
Ingénieur civil bilingue possédant plusieurs années d'expérience dans la direction et la gestion de projets majeurs ainsi qu’une expérience diversifiée dans les domaines suivants :
• Réalisation et exécution de projets
• Ordonnancement et planification
• Gestion d’équipe de projets
• Gestion des clients
• Contrôle des coûts
• Construction de bâtiments industriels
• Gestion de fabrication manufacturière
• Contrôle de la qualité
• Amélioration de la productivité et la qualité
• Contrôle d'approvisionnement des équipements
• Gestion des réclamations
• Santé et Sécurité
Capacité à diriger et à motiver diverses équipes de professionnels dans la réalisation des objectifs. Maitrise la coordination entres les disciplines suivantes :
• Civil – Structure - Architecture
• Mécanique et électrique
• Contrôle et automatisation
• Télécommunication
• Ferroviaire
• Aéronautique
• Métallurgie
• Minier
• Pétrochimie
• Biotechnologie
I enjoy developing new products and am passionate about delivering superior solutions. With 15 years working in the auto industry, I have broad experience in Chassis, Advanced Package Engineering and BIW. My responsibilities regularly include managing the evolution of a project, developing CAD Engineer solutions, training colleagues in new processes and leading group discussions and presentations. I am seeking a role requiring leadership and the continued development of my technical abilities.
Optimization Culture Arena at Volvo Car GroupAltair
CAE has been used for a long time in the vehicle industry. It has been an efficient method for replacing expensive physical testing and predicting the performance of a component, system or complete model. This process has been supported by a rapid increase of computer power. CAE methods for replacing physical testing will continue to develop, however a shift in focus and application of CAE methods for the early development phases can be seen in the vehicle industry. This indicates a trend to a more CAE and knowledge driven development. This will put high demands of development of CAE methods and tools to drive the design. Some key areas for this is efficient use of e.g. topology, thickness and material optimization, performance balancing, etc.
To support this shift to more upfront CAE an “Optimization Culture Arena” has been launched at Volvo Car Group. This arena is a cross technical network for knowledge sharing and optimization competence development at VCG that consist of people from CAE, attribute areas, design, testing, technical specialists, academy etc. The arena function is to support implementation of an optimization driven culture and support development of guidelines and methods regarding optimization. The arena is supported by a knowledge hub to spread latest news and planned activities and also handle a competence matrix to support exchange of knowledge. A geographic area will serve as a place to meet, get support and share good examples of CAE driven development.
Speakers
Harald Hasselblad, Senior Analysis Engineer, VOLVO CAR CORPORATION
Sommaire
Ingénieur civil bilingue possédant plusieurs années d'expérience dans la direction et la gestion de projets majeurs ainsi qu’une expérience diversifiée dans les domaines suivants :
• Réalisation et exécution de projets
• Ordonnancement et planification
• Gestion d’équipe de projets
• Gestion des clients
• Contrôle des coûts
• Construction de bâtiments industriels
• Gestion de fabrication manufacturière
• Contrôle de la qualité
• Amélioration de la productivité et la qualité
• Contrôle d'approvisionnement des équipements
• Gestion des réclamations
• Santé et Sécurité
Capacité à diriger et à motiver diverses équipes de professionnels dans la réalisation des objectifs. Maitrise la coordination entres les disciplines suivantes :
• Civil – Structure - Architecture
• Mécanique et électrique
• Contrôle et automatisation
• Télécommunication
• Ferroviaire
• Aéronautique
• Métallurgie
• Minier
• Pétrochimie
• Biotechnologie
I enjoy developing new products and am passionate about delivering superior solutions. With 15 years working in the auto industry, I have broad experience in Chassis, Advanced Package Engineering and BIW. My responsibilities regularly include managing the evolution of a project, developing CAD Engineer solutions, training colleagues in new processes and leading group discussions and presentations. I am seeking a role requiring leadership and the continued development of my technical abilities.
Optimization Culture Arena at Volvo Car GroupAltair
CAE has been used for a long time in the vehicle industry. It has been an efficient method for replacing expensive physical testing and predicting the performance of a component, system or complete model. This process has been supported by a rapid increase of computer power. CAE methods for replacing physical testing will continue to develop, however a shift in focus and application of CAE methods for the early development phases can be seen in the vehicle industry. This indicates a trend to a more CAE and knowledge driven development. This will put high demands of development of CAE methods and tools to drive the design. Some key areas for this is efficient use of e.g. topology, thickness and material optimization, performance balancing, etc.
To support this shift to more upfront CAE an “Optimization Culture Arena” has been launched at Volvo Car Group. This arena is a cross technical network for knowledge sharing and optimization competence development at VCG that consist of people from CAE, attribute areas, design, testing, technical specialists, academy etc. The arena function is to support implementation of an optimization driven culture and support development of guidelines and methods regarding optimization. The arena is supported by a knowledge hub to spread latest news and planned activities and also handle a competence matrix to support exchange of knowledge. A geographic area will serve as a place to meet, get support and share good examples of CAE driven development.
Speakers
Harald Hasselblad, Senior Analysis Engineer, VOLVO CAR CORPORATION
-Industrial Engineering in the International Institute of Technology IIT.
-Healthcare engineering and hospital logistics.
-Simulation for industrials processes such as emergency blocks and operating rooms in ARENA environment.
-Mapping processes VSM to simplify the reading of different flows and identify the sources of failure.
-Continuous improvement (5S, DEMAIC, Lean management, Risk management, HOSHIN) to minimise waste and increase productivity.
- Apply Lean management in hospital services.
- Risk management in emergency blocks.
Multi-skilled Electric & automatic engineer with first experience
in project management armed with strong technical ,
organizational and communication abilities seeking a challenging entry-level position within a multi-nationals company working in Energy, Automotive ,Aerospace or industrial sector.