Raychem Tyco XAGA 550 Joint Closure (Unpressurized Copper Telephone Networks)
Tyco Raychem XAGA 550
*Heat-shrinkable composite joint closure system for environmental and mechanical protection of joints in the unpressurised telephone network
*The composite structure of the reinforced Rayfort sleeve offers an excellent resistance to mechanical abuse during and after the installation
*The integrated moisture barrier completely reconstitutes the cable sheath over the total splice area
*The hot-melt adhesive forms a watertight seal to the cable sheath
*Up to 3 cables at each end can be accommodated using three finger clips with hot-melt adhesive
*Correct installation indication: heat sensitive paint and adhesive flow
SPS High Voltage Cable Termination Kit List (Typical) - Three Core Cables
XLPE EPR HV Termination Kits
Anti-track heat shrink 3 core tubes x 3
Stress control heat shrink 3 core tubes x 3
Yellow stress relief tape for screen ends x 3
3 core heat shrink cable breakout boot x 1
Red mastic sealing tape x 1
Cable cleaning and de-greasing wipes x 3
Box, label, jointing instructions x 1
HV Termination Kits Optional Extras, 3 Core 6.6-7.2kV - Solderless Earth Kit for Copper Tape Screen Cables, Insulating Bushing Boots (Straight, Right Angled, Universal), HV Cable Glands for SWA Cable (Bolt-on Top Hat), Outdoor Armour Earthing Kit, Outdoor Stand-off Brackets + Insulators, High Voltage HV Cable Lugs (Crimp or Mechanical Shearbolt Lugs).
SPS High Voltage Heat Shrink Cable Termination Kits, 6.6-7.2kV - Testing
SPS high voltage heat shrink termination kits for 3 core HV cables (XLPE and EPR) are Tested and Certified to latest International Test Standards as outlined in Cenelec standards HD 628 S1 and 629.1 S2 : 2006 - high voltage cable termination kit testing also encompasses VDE 0278 and IEC 60502.
Industrial & Hazardous Area (ATEX) Plugs
Marechal Distribution Boxes
Marechal Electric - Plugs, Sockets & Decontactors
The Marechal distribution boxes cover a wide range of electrical installations: connecting power outlets and boxes. The Marechal boxes are particularly suited to power supply in tunnels.
Marechal Distribution Box Benefits
Equipment for tunnels
Boxes for distribution, tap-offs, liquefied gas transfer, service and terminals
Marechal Distribution Box Range:
Marechal Express Boxes - Distribution Boxes For Standard Lighting
Marechal Express Fire Boxes - Distribution Boxes For Emergency Lighting
Marechal F400 - Wall Mounting Socket-Outlet For Jet Fans
Marechal BF - Fire Department Boxes
Marechal CD - Distribution Boxes & Socket-Outlets With Protection
Marechal BM - Modular Distribution Boxes
Marechal BG - Box For Liquefied Gas Transfer
Marechal BRP - Portable Service Box
Straight and right angled bushing boots from stock suit switchgear and transformer bushings - bushing boots provide high voltage electrical insulation, preventing flashover caused by moisture ingress, industrial contamination, high humidity and rodents.
High Voltage 33kV Bushing Boots (RABK/STBK)
The high voltage bushing diameters on a 33kV switchgear or transformer system are normally in excess of 100mm in diameter so a standard boot is unsuitable. 33kV insulating boots are ex stock.
Craig and Derricott Isolators
Isolation Equipment and Switch Disconnectors
Moulded Plastic Isolators & Switch Disconnectors IP65 20A-63A
Mild Steel Isolators & Switch Disconnectors IP65 20A-63A
Stainless Steel Isolators & Switch Disconnectors IP65 20A-63A
Die Cast Isolators & Switch Disconnectors IP65 20A-63A
Sheet Steel Isolators & Switch Disconnectors IP41 32A-630A
Sheet Steel Isolators & Switch Disconnectors IP65 32A-1000A
ATEX Zone 22 Isolators& Switch Disconnectors Cat 3D
Fire Rated Isolators & Switch Disconnectors 20A-125A
Isolation Equipment and Switch Disconnectors
Craig & Derricott Section 12 London Underground Isolators
Craig & Derricott Stainless Steel Water Utility Isolators
Lucy Lighting Street Lighting Trojan Isolators
Switch Disconnectors (Isolators) provide the means to safely disconnect or isolate an item of electrical equipment from the power supply - primarily designed to provide a means of local isolation when an elecrical item may need maintenance or repair. Switch Disconnectors also i) provide an effective clearance between the supply and the electrical load appropriate to the voltage applied, ii) provide a means of "locking off" (padlocking), iii) provide true indication of contact state, iv) provide a safe electrical disconnection from the power supply even under fault conditions.
Raychem Tyco XAGA 550 Joint Closure (Unpressurized Copper Telephone Networks)
Tyco Raychem XAGA 550
*Heat-shrinkable composite joint closure system for environmental and mechanical protection of joints in the unpressurised telephone network
*The composite structure of the reinforced Rayfort sleeve offers an excellent resistance to mechanical abuse during and after the installation
*The integrated moisture barrier completely reconstitutes the cable sheath over the total splice area
*The hot-melt adhesive forms a watertight seal to the cable sheath
*Up to 3 cables at each end can be accommodated using three finger clips with hot-melt adhesive
*Correct installation indication: heat sensitive paint and adhesive flow
SPS High Voltage Cable Termination Kit List (Typical) - Three Core Cables
XLPE EPR HV Termination Kits
Anti-track heat shrink 3 core tubes x 3
Stress control heat shrink 3 core tubes x 3
Yellow stress relief tape for screen ends x 3
3 core heat shrink cable breakout boot x 1
Red mastic sealing tape x 1
Cable cleaning and de-greasing wipes x 3
Box, label, jointing instructions x 1
HV Termination Kits Optional Extras, 3 Core 6.6-7.2kV - Solderless Earth Kit for Copper Tape Screen Cables, Insulating Bushing Boots (Straight, Right Angled, Universal), HV Cable Glands for SWA Cable (Bolt-on Top Hat), Outdoor Armour Earthing Kit, Outdoor Stand-off Brackets + Insulators, High Voltage HV Cable Lugs (Crimp or Mechanical Shearbolt Lugs).
SPS High Voltage Heat Shrink Cable Termination Kits, 6.6-7.2kV - Testing
SPS high voltage heat shrink termination kits for 3 core HV cables (XLPE and EPR) are Tested and Certified to latest International Test Standards as outlined in Cenelec standards HD 628 S1 and 629.1 S2 : 2006 - high voltage cable termination kit testing also encompasses VDE 0278 and IEC 60502.
Industrial & Hazardous Area (ATEX) Plugs
Marechal Distribution Boxes
Marechal Electric - Plugs, Sockets & Decontactors
The Marechal distribution boxes cover a wide range of electrical installations: connecting power outlets and boxes. The Marechal boxes are particularly suited to power supply in tunnels.
Marechal Distribution Box Benefits
Equipment for tunnels
Boxes for distribution, tap-offs, liquefied gas transfer, service and terminals
Marechal Distribution Box Range:
Marechal Express Boxes - Distribution Boxes For Standard Lighting
Marechal Express Fire Boxes - Distribution Boxes For Emergency Lighting
Marechal F400 - Wall Mounting Socket-Outlet For Jet Fans
Marechal BF - Fire Department Boxes
Marechal CD - Distribution Boxes & Socket-Outlets With Protection
Marechal BM - Modular Distribution Boxes
Marechal BG - Box For Liquefied Gas Transfer
Marechal BRP - Portable Service Box
Straight and right angled bushing boots from stock suit switchgear and transformer bushings - bushing boots provide high voltage electrical insulation, preventing flashover caused by moisture ingress, industrial contamination, high humidity and rodents.
High Voltage 33kV Bushing Boots (RABK/STBK)
The high voltage bushing diameters on a 33kV switchgear or transformer system are normally in excess of 100mm in diameter so a standard boot is unsuitable. 33kV insulating boots are ex stock.
Craig and Derricott Isolators
Isolation Equipment and Switch Disconnectors
Moulded Plastic Isolators & Switch Disconnectors IP65 20A-63A
Mild Steel Isolators & Switch Disconnectors IP65 20A-63A
Stainless Steel Isolators & Switch Disconnectors IP65 20A-63A
Die Cast Isolators & Switch Disconnectors IP65 20A-63A
Sheet Steel Isolators & Switch Disconnectors IP41 32A-630A
Sheet Steel Isolators & Switch Disconnectors IP65 32A-1000A
ATEX Zone 22 Isolators& Switch Disconnectors Cat 3D
Fire Rated Isolators & Switch Disconnectors 20A-125A
Isolation Equipment and Switch Disconnectors
Craig & Derricott Section 12 London Underground Isolators
Craig & Derricott Stainless Steel Water Utility Isolators
Lucy Lighting Street Lighting Trojan Isolators
Switch Disconnectors (Isolators) provide the means to safely disconnect or isolate an item of electrical equipment from the power supply - primarily designed to provide a means of local isolation when an elecrical item may need maintenance or repair. Switch Disconnectors also i) provide an effective clearance between the supply and the electrical load appropriate to the voltage applied, ii) provide a means of "locking off" (padlocking), iii) provide true indication of contact state, iv) provide a safe electrical disconnection from the power supply even under fault conditions.
900 Series Interface F Nexans Euromold Cable Connectors and Bushings connect and terminate HV cables to Interface F bushings on switchgear and transformers up to 42kV. Nexans 944TB Tee Connectors provide high voltage cable terminations using separable tee shape connectors :
Nexans 944TB/G - 12kV 2500Amp 70-80sqmm Conductors
Nexans K944TB/G - 24kV 2500Amp 16-800sqmm Conductors
Nexans M944TB/G - 36kV 2500Amp 35-800sqmm Conductors
Nexans P944TB/G - 42kV 1250Amp 50-800sqmm Conductors
Prysmian BICON Multistrap
* Prysmian BICON multistraps are cable straps complete with a tensioning clip, securing pin and winding key all made from high corrosion resistant non-magnetic stainless steel
* Multistraps are cable straps used an an intermediate restraint between Multicleat cable cleats
* Multistraps can be used to bind cables together
Prysmian BICON Multistraps can be supplied in 2 strengths - i) standard duty designed to have 2 loops of 0.38mm thick cable strap around the LV-HV cables, ii) heavy duty designed to have 3 loops of 0.38mm thick cable strap around the LV-HV cables.
The outdoor silicone-rubber insulation design includes a skirt configuration that offers exceptional creep, strike, weather and contamination resistance, along with superior cable sealing and voltage withstand. All termination kits come complete with the housing and stress tube pre-assembled on the core, ready for quick and easy installation.
“The Ranger2® Shrink-Fit Terminations enhance the breadth of our Elastimold® line of pre-molded cable accessory components,” said Mike Jackson, Product Manager for Thomas & Betts. “Their design provides the superior skirt configurations for riser pole, pad-mounted and other installations exposed to the elements.”
The single-piece terminations for 15kV and 25kV applications feature shrink-fit design for effortless installation. The two-piece termination for 35kV applications facilitates easier core removal: one needs only to position the terminator on the prepared cable and remove the center core. The terminations are compact and lightweight to enable installations in restricted spaces and free-hanging applications.
Elastimold® Ranger2® Shrink-Fit Terminations 15-35kV meet or exceed all requirements of IEEE Standard 48 for Class 1 outdoor or Class 2 indoor terminations.
Hadar Hazardous Area (ATEX) Lighting ranges are suitable for explosive atmosphere environments and are certified to Zone 1, Ex e, Ex d and Zone 2 Ex n hazardous areas – fluorescent, recessed, portable, bulkhead, wellglass, floodlight and LED hazardous area lighting ranges.
The Hadar hazardous area lighting ranges comprises one of the most up to date and innovative lighting portfolios - suitable for explosive atmospheres the range of Hadar hazardous area lighting is certified to Zone 1 & 21, Ex e, Ex d, and Zone 2 & 22 Ex n.
The Hadar Lighting Ex e products feature the “End of Life” (EoL) protection circuit ballast according to DIN EN 61347-2-3 and IEC 60079-7 Ed.4.
Hadar Hazardous Area Lighting is a specialist manufacturer of hazardous area lighting for the oil, gas, petro-chemical, pharmaceutical, offshore and marine industries worldwide offering the design and production of lighting products for Zone 1, 2, 21 & 22, Gas and Dust - this includes ATEX and IEC Ex Explosion Proof Exe & Ex d Lighting ranges : fluorescent, recessed, helideck, LED floodlight, bulkhead and well glass.
SINCE 1973...
EAE Group of Companies; started it's journey within the electricity sector in 1973 as the EAE Elektrik Company, which was located in Güngören. With the increase in production capacity, the manufacturing was later transferred to the modern factory in ikitelli in 1995. In 2007, with the new establishments and operations of their manufacturing plants located in Esenyurt, helped enhance the growth of production space.
All the companies within the EAE Group are established with 100% domestic capital, and the development of the products is carried out by the R&D departments located within the companies.
The EAE Group which empowers itself with its expert staff in each field; providing employment for 2,500 people, is one of the leading companies in the electrical products market in Turkey.
EAE Group carries out its production activities in accordance with the ISO 9001 system quality standard, as well as the ISO 14001 environmental standard. The conformity of the electrical products produced within the world standards, has been documented as a result of the tests made by KEMA and CESI laboratories.
EAE Group carries on its activities in accordance with ISO 9001 Quality Management, ISO 14001 Environmental Management and ISO 27001 Information Security Management System Standards. Conformance of manufactured electrical products to the world standards is certified as a result of the tests conducted by KEMA and CESI laboratories. In addition to all these, we substantiate our innovative line of vision and your confidence on our enterprise with over 30 patents, over 300 brands and over 100 industrial designs.
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Knowledge engineering: from people to machines and back
WT Henley Heavy Duty 4 Pole Insulated Cut-outs
1. Four Pole Insulated
Heavy Duty Cut-out
Rated from 200A to 400A inclusive
· New incoming termination arrangement
· Suitable for both stranded/ solid copper
or aluminium conductors
· For use with 95 – 300mm2
Cables
· Designed and fully tested in accordance
with ESI 37-2
GENERAL FEATURES
· The fully insulated four pole cut-out is designed to accept BS 88 ‘J’ type fuse-links. With each
phase contained within a separate enclosure the unit provides a high level of operator protection
and allows for easy cabling.
· Moulded from high impact glass reinforced Polyester material, which is inherently flame retardant
UL94 V0 rated, and posses an electrical tracking resistance (CTI) >600.
· Narrow shrouded through grip Carriers (82mm fixing Centres) are provided for Phase connection/
isolation, and a variety of Neutral/ Earth arrangements are available to suit specifier requirements.
· Cable entry/ exit from cut-out via PVC grommet, hence unit is ideal for installation where space is
limited. A three-cable entry position-sealing chamber is available for a more traditional installation.
· Incoming cable termination via mechanical connector (Double shear bolt) type, which accepts 1x
(95 – 300mm2
) conductor.
· Outgoing cable connection provided via tunnel terminals manufactured from solid brass section,
with 2 hex-drive pinch screws fitted within each conductor entry. Outgoing connection provided
with standard terminal arrangement (2x 95mm2
and 1x 120mm2
) conductors.
· Both an individual security sealing and pad-lockable unit isolation facility are provided via four-pole
enclosure lid mechanism.
· The insulated cut-out is supplied installed on wooden battens, pre-drilled ready for wall mounting.
TDS 025
Issue 1 dated 17/05/00
The information contained in this sheet is correct at the time of production. However, W T Henley Ltd reserves the right to
make modifications, or improvements, to the product or its specification from time to time.
APPROXIMATE DIMENSIONSPRODUCT
NUMBER
A
(mm)
B
(mm)
C
(mm)
WEIGHT
(Kg)
54427-15 350 445 180 12.30
Single Pole of Heavy Duty Cut-out fitted with 300mm2
Stranded
Aluminium conductor within incoming mechanical connector.
WWW.CABLEJOINTS.CO.UK
THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK