RSF-AT-20 (P) is a cationic finishing softener from RSA Industries, suitable for various fabrics such as cotton, polyester, and blends for exhaust and padding applications. It offers excellent softness, surface smoothness, and cost savings due to lower dosage requirements compared to traditional cationic flakes. Proper usage guidelines and recommended dosages are provided, emphasizing the importance of maintaining pH levels and curing temperatures for optimal results.

1. FINISHING SOFTENER
Suitable for all fabrics for
Exhaust & padding application
RSF-AT-20 (P)
RSA Industries Pvt. Ltd.
______________________________________________
For export inquiries contact- +91-9823072312, For Indian inquiries contact- +91-9665082759
Fax: 0091-7104-236417 / 0091-712-2421729
Email: exports@ranchemicals.in/sales@ranchemicals.in/ marketing@rsaindustries.in
Website: www.ranchemicals.in / www.rsaindustries.in

2. ___________________________________________________________________________
RSA Industries Pvt. Ltd.
For export inquiries contact- +91-9823072312, For Indian inquiries contact- +91-9665082759
Fax: 0091-7104-236417 / 0091-712-2421729
Email: exports@ranchemicals.in/sales@ranchemicals.in/ marketing@rsaindustries.in
Website: www.ranchemicals.in / www.rsaindustries.in
RSF-AT-20 (P)
APPLICATION
Cationic finishing softener for all types of fabric like Woven Cotton, Cotton Knits, Velvet, Garment, Polyester
and blends for exhaust as well as padding applications.
CHEMISTRY FOR PERFORMANCE
Excellent softness and superior surface smoothness, with good bulk.
Less yellowing and better hydrophilicity than cationic flakes. Retains brilliancy.
Can replace 1 Kg of cationic flakes by 2.5 kg of RSF-AT-20 (P) with much better performance
No tonal variation
Easy dilution
CHEMISTRY FOR ECONOMICS
Product gives good cost saving with performance due to lower dosage.
PHYSICAL PROPERTIES
Product Appearance pH Pack Size
Combination of non-ionic polymeric specialty
softener with cationic,
Bio-degradable & eco-friendly
Creamish paste 5.0-6.0
60 kg open
mouth HDPE
Carboy
Recommended dosages for different fabrics
S. No. Substrate Method Doses (after 1:10 dilution)
1. Woven Cotton Padding 30 -80 gpl
2. Cotton Knits Padding 30 -100 gpl
3. Cotton Knits Exhaust 1 -3 %
4. Polyester & its blends Padding 10 -30 gpl
Note:
Liquor ratio (1:8 to 1:10) in exhaust.
Do not add the product directly in the machine.
Maintain the pH 5 - 5.5 by Acetic Acid.
Check the feel after conditioning only.

3. ___________________________________________________________________________
RSA Industries Pvt. Ltd.
For export inquiries contact- +91-9823072312, For Indian inquiries contact- +91-9665082759
Fax: 0091-7104-236417 / 0091-712-2421729
Email: exports@ranchemicals.in/sales@ranchemicals.in/ marketing@rsaindustries.in
Website: www.ranchemicals.in / www.rsaindustries.in
Special Note
Higher the temperature of curing better will be the result.
Our softener will show expected result after complete conditioning of the fabric.
The dose level is to be decided as per the individual’s requirement and their finishing cost.
The dose level of our product is quite low and hence is economical with good results.
Higher performance can also be achieved by blending with silicones and cationics.
* The literature indicates general information guidelines on our product for their use. The user should check the suitability of the product
for their use. RAN/RSA makes no warranty of any kind expressed or implied. Industrial safety practice is to be followed. RAN/RSA takes
no responsibility and expressly disclaim liabilities for law, damage or expense rising out of or in any way connected with the handling,
storage, use or disposable of the product.