2. A configuration is an arrangement of
functional units according to their nature,
number, and chief characteristics.
Often,configuration pertains to the choice of
hardware, software, firmware, and
documentation.” The process of setting
a network's controls, flow and operation to
support the network communication of an
organization and network owner. ”
3. A router is a networking device that
forwardsdata packets between
computer networks. Routers perform the
traffic directing functions on the Internet. A
data packet is typically forwarded from
one router to another router through the
networks that constitute an internetwork
until it reaches its destination node.
4.
5. 1) Download Cisco CP V2.5
2) Start > Programs > Cisco Configuration
Professional and choose
the Community which has the router you
want to configure.
6.
7.
8. Router Configuration to Run Cisco CP
Connect to your router using Telnet, SSH, or
through the console.
Enter global configuration mode using this
command:
Router(config)#enable
Create a user with privilege level 15:
Router(config)# username <username>
privilege 15 password 0 <password>
Router(config)#
9. (Optional) Enable local logging to support the
log monitoring function:
Router(config)# logging buffered 51200
warning
34. Router Configuration
Router#show run Building configuration... Current configuration : 2525 bytes !
version 12.4 service timestamps debug datetime msec service timestamps log
datetime msec no service password-encryption ! hostname Router ! boot-start-
marker boot-end-marker ………………………