sample of full 4 day course powerpoint avialable for download at http://www.bin95.com/ebooks/index.htm#powerpoints
Full presentation has 354 slides in 4 PPT files and 54 pages in workbooks.
This document provides an overview of a bowtie risk analysis conducted on extended well test (EWT) facilities located on a floating storage unit in Malaysia. The analysis was conducted as a student project to identify major hazards, threats, and consequences related to loss of containment at the EWT facilities. The summary outlines the 8 steps to constructing a bowtie diagram: 1) identify hazards, 2) identify the top event, 3) identify threats, 4) evaluate consequences, 5) identify threat barriers, 6) identify recovery measures, 7) identify escalation factors, and 8) control escalation. The full document includes more details on implementing each step of the bowtie construction and analysis for the specific EWT facilities.
This document discusses managed pressure drilling systems, multilateral wells, and coiled tubing underbalanced drilling. It provides information on various tools used in geophysical well logging, such as gamma ray, SP, resistivity, sonic, density, and neutron logs. It also describes underbalanced drilling techniques which create a pressure differential between the wellbore and reservoir to encourage fluid flow into the wellbore. Underbalanced drilling can reduce formation damage compared to conventional overbalanced drilling.
Gear pump operation & maintenance.
REF: https://bin95.com/vocational-training/maintenance/reliability-training.htm
A gear pump uses two meshing, toothed cogs to force liquid from the inlet of the pump through to the outlet.
Being a positive displacement pump there deliver very precise quantities for each revolution, and this means they have good dosing characteristics
regardless of their speed or the pressure into which they discharge. Keywords: internal, external teeth, pressure relief, viscosity.
Excerpt: "The design of a gear pump lends itself to use with clean liquids. Ensure they draw liquid from well above the
bottom of the supply tank in clear liquid space. Both low and high viscosity liquids can be pumped. If food
grade products sensitive to shear (i.e., where the churning action of the pump breaks cells and fibers) are to be
pumped the size of the pump will need to be increased and the speed reduced."
64-page Excerpt from Process Hazards Analysis Book ( https://bin95.com/ebooks/hazop_risk_management.htm ) by Ian Sutton.
Process Hazards Analyses (PHAs) are an integral part of any process safety program. If you cannot identify hazards then you can neither remove them nor mitigate against them. This book describes in detail how to run a Process Hazards Analysis, and how to effectively identify hazards. The book focuses on real-world issues such as the role of the leader, team selection, writing the final report, quantification of risk, and follow-up to findings.
Quotations and topics raised in the book include the following:
* A PHA leader "comforts the afflicted but afflicts the comfortable"
* Don't confuse "common cause" with "root cause"
If it's not there, it can't leak
* Deciding whether to focus on high risk or on high consequence hazards
* The importance of MAWP values
* Distinguish between Findings, Recommendations, and Action Items
This book has been reviewed by the authoritative journal Chemical Engineering. A copy of that review is accessible at the link above.
This Machinery Failure Analysis and Troubleshooting handout is from our instructor-based PLC Training.
Learn more about troubleshooting at https://bin95.com/vocational-training/electrical/electrical-troubleshooting-plc-troubleshooting.htm
Understanding physics is the first and critical step to troubleshooting. Then we apply it to PLC troubleshooting, all in one simple handout page.
This Book https://bin95.com/ebooks/quality-course-management.htm is Currently Used At Universities And The Q-Course Foundation Exams Are Approved By State Ministry For Education.
This book is for everyone involved in quality in an organization. This book will help you obtain total quality management, a must-read for the organizational change management process. Also offers experience in testing & quality standards and methodologies of TMap, Testframe, ITIL, ISO 9001, TQM, Prince2, RUP, CMM, TMM, and ISEB.
The book excerpts here are ...
* Quality & Organization
* The Development Process
* Quality in the Project Organization
A 28-page sample from Process Risk Management book https://bin95.com/ebooks/risk_tree_analysis.htm by Ian Sutton.
The Process Risk Management EBook - Ian Sutton uses methods such as risk tree analysis combined with process safety information to help you gain an accurate operational risk assessment. This 272-page HSE book is a must-read for the HSE Manager and those studying process hazards analysis.
Excellent safety and environmental performance in the process industries does not happen by chance; after all, most process facilities handle large quantities of toxic, flammable, and explosive materials, often at high temperatures and pressure. Such processes are inherently hazardous. Therefore process risk must be properly understood and managed.
This document provides an overview of a bowtie risk analysis conducted on extended well test (EWT) facilities located on a floating storage unit in Malaysia. The analysis was conducted as a student project to identify major hazards, threats, and consequences related to loss of containment at the EWT facilities. The summary outlines the 8 steps to constructing a bowtie diagram: 1) identify hazards, 2) identify the top event, 3) identify threats, 4) evaluate consequences, 5) identify threat barriers, 6) identify recovery measures, 7) identify escalation factors, and 8) control escalation. The full document includes more details on implementing each step of the bowtie construction and analysis for the specific EWT facilities.
This document discusses managed pressure drilling systems, multilateral wells, and coiled tubing underbalanced drilling. It provides information on various tools used in geophysical well logging, such as gamma ray, SP, resistivity, sonic, density, and neutron logs. It also describes underbalanced drilling techniques which create a pressure differential between the wellbore and reservoir to encourage fluid flow into the wellbore. Underbalanced drilling can reduce formation damage compared to conventional overbalanced drilling.
Gear pump operation & maintenance.
REF: https://bin95.com/vocational-training/maintenance/reliability-training.htm
A gear pump uses two meshing, toothed cogs to force liquid from the inlet of the pump through to the outlet.
Being a positive displacement pump there deliver very precise quantities for each revolution, and this means they have good dosing characteristics
regardless of their speed or the pressure into which they discharge. Keywords: internal, external teeth, pressure relief, viscosity.
Excerpt: "The design of a gear pump lends itself to use with clean liquids. Ensure they draw liquid from well above the
bottom of the supply tank in clear liquid space. Both low and high viscosity liquids can be pumped. If food
grade products sensitive to shear (i.e., where the churning action of the pump breaks cells and fibers) are to be
pumped the size of the pump will need to be increased and the speed reduced."
64-page Excerpt from Process Hazards Analysis Book ( https://bin95.com/ebooks/hazop_risk_management.htm ) by Ian Sutton.
Process Hazards Analyses (PHAs) are an integral part of any process safety program. If you cannot identify hazards then you can neither remove them nor mitigate against them. This book describes in detail how to run a Process Hazards Analysis, and how to effectively identify hazards. The book focuses on real-world issues such as the role of the leader, team selection, writing the final report, quantification of risk, and follow-up to findings.
Quotations and topics raised in the book include the following:
* A PHA leader "comforts the afflicted but afflicts the comfortable"
* Don't confuse "common cause" with "root cause"
If it's not there, it can't leak
* Deciding whether to focus on high risk or on high consequence hazards
* The importance of MAWP values
* Distinguish between Findings, Recommendations, and Action Items
This book has been reviewed by the authoritative journal Chemical Engineering. A copy of that review is accessible at the link above.
This Machinery Failure Analysis and Troubleshooting handout is from our instructor-based PLC Training.
Learn more about troubleshooting at https://bin95.com/vocational-training/electrical/electrical-troubleshooting-plc-troubleshooting.htm
Understanding physics is the first and critical step to troubleshooting. Then we apply it to PLC troubleshooting, all in one simple handout page.
This Book https://bin95.com/ebooks/quality-course-management.htm is Currently Used At Universities And The Q-Course Foundation Exams Are Approved By State Ministry For Education.
This book is for everyone involved in quality in an organization. This book will help you obtain total quality management, a must-read for the organizational change management process. Also offers experience in testing & quality standards and methodologies of TMap, Testframe, ITIL, ISO 9001, TQM, Prince2, RUP, CMM, TMM, and ISEB.
The book excerpts here are ...
* Quality & Organization
* The Development Process
* Quality in the Project Organization
A 28-page sample from Process Risk Management book https://bin95.com/ebooks/risk_tree_analysis.htm by Ian Sutton.
The Process Risk Management EBook - Ian Sutton uses methods such as risk tree analysis combined with process safety information to help you gain an accurate operational risk assessment. This 272-page HSE book is a must-read for the HSE Manager and those studying process hazards analysis.
Excellent safety and environmental performance in the process industries does not happen by chance; after all, most process facilities handle large quantities of toxic, flammable, and explosive materials, often at high temperatures and pressure. Such processes are inherently hazardous. Therefore process risk must be properly understood and managed.
This simple equipment reliability example is used to convey the basics of reliability engineering. Learn the 4 system reliability factors that must all be addressed. Download the full 235 slide Reliability and Maintenance Management Course PowerPoint today at https://bin95.com/articles/maintenance-management/equipment-reliability-examples.htm
This document discusses best practices for learning SCADA systems. It recommends a three phase approach: 1) a strong foundation in PLC and SCADA basics, 2) vendor-specific SCADA training, and 3) more advanced SCADA topics. For phase one, it outlines prerequisites like PLC basics and computer literacy. It also recommends getting hands-on experience installing and modifying real SCADA software. Phase two involves training from SCADA software vendors. Phase three covers more specialized topics like process control, networking, and programming. The overall goal is to learn SCADA systems thoroughly through a structured, multi-step process.
Answer to most simple PLC programming example we placed at https://www.slideshare.net/bin95/plcclock to see if those starting out with PLC programming could figure out how to fix. The fix is in, this it.
(Adam Bowman was the first one to find the problems in Quiz version of this program and give a detailed solution, congrats Adam. the version you are viewing here, PLCCLOCK-ANSW.rss is one possible working solution for the PLC clock program.)
This Siemens plc programming example PDF 2 is an expansion the counter PDF example 1.and has counter structured text programming example. Also a supporting video and more programming samples can be found at http://bin95.com/Siemens-Training/siemens-plc-programming-examples.htm
Free PLC training PowerPoint from the 1 hour webinar we did for the Association for Facilities Engineering. Of course with 30 slides and instructor notes for each, because as those who use our training know, we give extra. Actually we went over by 45 min on this PLC training and we didn't even talk about the extra PLC training slides in this one. We start with what is a PLC put in the most simplest form possible, and then get you a little taste of our best practice PLC training and approach from our PLC training seminars and on-site PLc training.
How IR Infrared Thermography Training and certification can greatly improve process and manufacturing reliability, increase electrical contractors and home improvement specialist's business revenue, and improve the individual's career opportunities. The Online Infrared Training Center opens new doors for both businesses and individuals. Watch and share this Infrared Thermography presentation to learn more.
PLC Networking Basics powerpoint downloadable and with instructor's notes to give more detail. This learning project is networking 5 computers to one Controllogix PAC (advanced PLC) via WiFi. PLC/PAC are automation controllers in process and manufacturing industries primarily. Although PLC/PAC are also used to control all infrastructure and have many niche applications. This basic networking mini course may be of interest to Maintenance, Maintenance Technician, Electrician, Industrial Electrician, Electrical Technician, Electromechanic Technician, Engineer, Engineering, Industrial Engineer, Control Engineer, Plant Engineer, Manufacturing Engineer, Instrument Tech, E/I, SCADA Technician, Controls Specialist, Process Control Technician, Service Technician, Field Service Technician, I&C Team Leader, Electrical Contractors, PLC Instructors, Electrical Instructors, Industrial Technology Instructors, Production Support Technician, Lead Technician, DCS Engineer, DCS Administrator, Water Treatment Specialist, Master Technician, Utility Technician, Technologist, Production Mechanic, HVAC Mechanic, Maintenance Superintendent, Engineering Manager, Project Engineer, Production Supervisor, IT Manager, Facility Service Supervisor and others.
PLC Networking Basics using a Controllogix module also has an associated interactive youtube course that uses an intro project of networking multiple class laptops to a single Controllogix 5000 PLC/PAC. This powerpoint is for reference and additional information to supplement the course at http://www.youtube.com/watch?v=Au03psa9Vxk The PLC Networking Basics course has a total of 4 training modules (videos), each with it's own question at end, before directing you to next Controllogix tutorial. There is also an associated test for this training course at http://bin95.com/Employee-Training-Assessments/PLC-Training-Assessment/PLC-Networking-Basics-Controllogix.php
Hope you like and share, which will encourage us to create more of these free courses.
This powerpoint has a video attached that help remind me of the pride the USMC bestowed on me and hopefully will you too. We are proud of our Veterans and thank you and your families for all you give and gave.
Instructions to help YOU support #WorkforceWednesdays next Wednesday. Like to contact your Senators or Representative to let them know NOT to consolidate and cut Federal Workforce Development programs like the WIA and a dozen more. #SaveOurSkills, #wkdev
The document discusses a training program called Autonomous Maintenance Level 2 that aims to give operators a better understanding of maintenance best practices and how equipment works. This results in maintenance and operators working together better to achieve autonomous maintenance. The training concentrates on detailed equipment and maintenance training in plain language for non-maintenance personnel. It is presented as being low cost and beneficial for all employees to understand equipment and the role of maintenance.
The document provides 7 warnings about selecting the wrong web developer for designing a company website. The warnings include the developer having limited contact information, relying solely on third-party content management systems, having a low page rank for their own website, not including full contact details on their own site, only showing pictures rather than links to actual past work, not including social media sharing buttons on their site, and having unoptimized pages in their portfolio.
The only PLC Simulator software in the world that teaches, trains and test on PLC Troubleshooting.
http://www.bin95.com/Troubleshooting-PLC-Controls-Simulator.htm
Share this world-class training software presentation with others. they'll appreciate it, as I do.
This document provides an overview of management of change (MOC) procedures. It discusses how MOC interacts with other process safety elements and the importance of incorporating organizational changes. It describes the typical management structure for overseeing MOC, including steering committees and subcommittees. It also outlines the steps in the change process, from identifying needs for change to assessing risks using matrices to evaluate consequences and frequencies of incidents.
The document discusses various topics related to industrial maintenance including the importance of stopping topping trees to reduce wear and tear and energy waste. It also notes the need for more industrial maintenance technicians in the US and suggests it could be a good career path for high school students if clearer pathways were available. Several links are provided to BIN95.com for additional information on PLC ladder logic, industrial training, the role of maintenance technicians, and whether management asks too much of one person in that role. The document ends by thanking the viewer for looking at art and requesting comments about any pieces they enjoyed.
Jack McDougle shares the Council’s new strategic alliance with the Thomas Publishing Company, we are including the July 2011 edition of Manufacturing Executive Leadership Journal, entitled “The Sustainability Imperative.”
How to Manage Reception Report in Odoo 17Celine George
A business may deal with both sales and purchases occasionally. They buy things from vendors and then sell them to their customers. Such dealings can be confusing at times. Because multiple clients may inquire about the same product at the same time, after purchasing those products, customers must be assigned to them. Odoo has a tool called Reception Report that can be used to complete this assignment. By enabling this, a reception report comes automatically after confirming a receipt, from which we can assign products to orders.
This simple equipment reliability example is used to convey the basics of reliability engineering. Learn the 4 system reliability factors that must all be addressed. Download the full 235 slide Reliability and Maintenance Management Course PowerPoint today at https://bin95.com/articles/maintenance-management/equipment-reliability-examples.htm
This document discusses best practices for learning SCADA systems. It recommends a three phase approach: 1) a strong foundation in PLC and SCADA basics, 2) vendor-specific SCADA training, and 3) more advanced SCADA topics. For phase one, it outlines prerequisites like PLC basics and computer literacy. It also recommends getting hands-on experience installing and modifying real SCADA software. Phase two involves training from SCADA software vendors. Phase three covers more specialized topics like process control, networking, and programming. The overall goal is to learn SCADA systems thoroughly through a structured, multi-step process.
Answer to most simple PLC programming example we placed at https://www.slideshare.net/bin95/plcclock to see if those starting out with PLC programming could figure out how to fix. The fix is in, this it.
(Adam Bowman was the first one to find the problems in Quiz version of this program and give a detailed solution, congrats Adam. the version you are viewing here, PLCCLOCK-ANSW.rss is one possible working solution for the PLC clock program.)
This Siemens plc programming example PDF 2 is an expansion the counter PDF example 1.and has counter structured text programming example. Also a supporting video and more programming samples can be found at http://bin95.com/Siemens-Training/siemens-plc-programming-examples.htm
Free PLC training PowerPoint from the 1 hour webinar we did for the Association for Facilities Engineering. Of course with 30 slides and instructor notes for each, because as those who use our training know, we give extra. Actually we went over by 45 min on this PLC training and we didn't even talk about the extra PLC training slides in this one. We start with what is a PLC put in the most simplest form possible, and then get you a little taste of our best practice PLC training and approach from our PLC training seminars and on-site PLc training.
How IR Infrared Thermography Training and certification can greatly improve process and manufacturing reliability, increase electrical contractors and home improvement specialist's business revenue, and improve the individual's career opportunities. The Online Infrared Training Center opens new doors for both businesses and individuals. Watch and share this Infrared Thermography presentation to learn more.
PLC Networking Basics powerpoint downloadable and with instructor's notes to give more detail. This learning project is networking 5 computers to one Controllogix PAC (advanced PLC) via WiFi. PLC/PAC are automation controllers in process and manufacturing industries primarily. Although PLC/PAC are also used to control all infrastructure and have many niche applications. This basic networking mini course may be of interest to Maintenance, Maintenance Technician, Electrician, Industrial Electrician, Electrical Technician, Electromechanic Technician, Engineer, Engineering, Industrial Engineer, Control Engineer, Plant Engineer, Manufacturing Engineer, Instrument Tech, E/I, SCADA Technician, Controls Specialist, Process Control Technician, Service Technician, Field Service Technician, I&C Team Leader, Electrical Contractors, PLC Instructors, Electrical Instructors, Industrial Technology Instructors, Production Support Technician, Lead Technician, DCS Engineer, DCS Administrator, Water Treatment Specialist, Master Technician, Utility Technician, Technologist, Production Mechanic, HVAC Mechanic, Maintenance Superintendent, Engineering Manager, Project Engineer, Production Supervisor, IT Manager, Facility Service Supervisor and others.
PLC Networking Basics using a Controllogix module also has an associated interactive youtube course that uses an intro project of networking multiple class laptops to a single Controllogix 5000 PLC/PAC. This powerpoint is for reference and additional information to supplement the course at http://www.youtube.com/watch?v=Au03psa9Vxk The PLC Networking Basics course has a total of 4 training modules (videos), each with it's own question at end, before directing you to next Controllogix tutorial. There is also an associated test for this training course at http://bin95.com/Employee-Training-Assessments/PLC-Training-Assessment/PLC-Networking-Basics-Controllogix.php
Hope you like and share, which will encourage us to create more of these free courses.
This powerpoint has a video attached that help remind me of the pride the USMC bestowed on me and hopefully will you too. We are proud of our Veterans and thank you and your families for all you give and gave.
Instructions to help YOU support #WorkforceWednesdays next Wednesday. Like to contact your Senators or Representative to let them know NOT to consolidate and cut Federal Workforce Development programs like the WIA and a dozen more. #SaveOurSkills, #wkdev
The document discusses a training program called Autonomous Maintenance Level 2 that aims to give operators a better understanding of maintenance best practices and how equipment works. This results in maintenance and operators working together better to achieve autonomous maintenance. The training concentrates on detailed equipment and maintenance training in plain language for non-maintenance personnel. It is presented as being low cost and beneficial for all employees to understand equipment and the role of maintenance.
The document provides 7 warnings about selecting the wrong web developer for designing a company website. The warnings include the developer having limited contact information, relying solely on third-party content management systems, having a low page rank for their own website, not including full contact details on their own site, only showing pictures rather than links to actual past work, not including social media sharing buttons on their site, and having unoptimized pages in their portfolio.
The only PLC Simulator software in the world that teaches, trains and test on PLC Troubleshooting.
http://www.bin95.com/Troubleshooting-PLC-Controls-Simulator.htm
Share this world-class training software presentation with others. they'll appreciate it, as I do.
This document provides an overview of management of change (MOC) procedures. It discusses how MOC interacts with other process safety elements and the importance of incorporating organizational changes. It describes the typical management structure for overseeing MOC, including steering committees and subcommittees. It also outlines the steps in the change process, from identifying needs for change to assessing risks using matrices to evaluate consequences and frequencies of incidents.
The document discusses various topics related to industrial maintenance including the importance of stopping topping trees to reduce wear and tear and energy waste. It also notes the need for more industrial maintenance technicians in the US and suggests it could be a good career path for high school students if clearer pathways were available. Several links are provided to BIN95.com for additional information on PLC ladder logic, industrial training, the role of maintenance technicians, and whether management asks too much of one person in that role. The document ends by thanking the viewer for looking at art and requesting comments about any pieces they enjoyed.
Jack McDougle shares the Council’s new strategic alliance with the Thomas Publishing Company, we are including the July 2011 edition of Manufacturing Executive Leadership Journal, entitled “The Sustainability Imperative.”
How to Manage Reception Report in Odoo 17Celine George
A business may deal with both sales and purchases occasionally. They buy things from vendors and then sell them to their customers. Such dealings can be confusing at times. Because multiple clients may inquire about the same product at the same time, after purchasing those products, customers must be assigned to them. Odoo has a tool called Reception Report that can be used to complete this assignment. By enabling this, a reception report comes automatically after confirming a receipt, from which we can assign products to orders.
How to Setup Default Value for a Field in Odoo 17Celine George
In Odoo, we can set a default value for a field during the creation of a record for a model. We have many methods in odoo for setting a default value to the field.
How to Download & Install Module From the Odoo App Store in Odoo 17Celine George
Custom modules offer the flexibility to extend Odoo's capabilities, address unique requirements, and optimize workflows to align seamlessly with your organization's processes. By leveraging custom modules, businesses can unlock greater efficiency, productivity, and innovation, empowering them to stay competitive in today's dynamic market landscape. In this tutorial, we'll guide you step by step on how to easily download and install modules from the Odoo App Store.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) CurriculumMJDuyan
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...EduSkills OECD
Andreas Schleicher, Director of Education and Skills at the OECD presents at the launch of PISA 2022 Volume III - Creative Minds, Creative Schools on 18 June 2024.
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.pptHenry Hollis
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Rotating Machinery Excellence Sample
1. Copyright 2009 Business Industrial Network www.BIN95.com Sample of … Rotating Equipment Reliability Excellence PowerPoint These are sample slides from complete 4 day course presentation available for download at http://www.bin95.com/ebooks/index.htm#powerpoints (354 slides) See www.BIN95.com to learn more about our PLC training.
2. Rotating Equipment Health and Reliability Excellence Presented by Mike Sondalini Lifetime Reliability Solutions Day 4 Copyright 2009 Business Industrial Network www.BIN95.com
3.
4.
5. Tuesday’s meeting starts with a new purpose... We’ll no longer talk of machinery problems and solutions Alan. From today to the end of the week we will talk about the business systems and processes that improve operating plant performance. You mentioned last week that systems are what we use to guarantee outcomes. They take people through a structured way of doing a thing so that luck and happenstance are removed. Yes, we use systems to improve the odds of getting the results we want. Without using a system we cannot monitor and control what we do, and we cannot be sure of what works and what does not. What sort of things will we cover this week? During the week we’ll introduce you to risk management, some simple reliability engineering concepts, and rotating equipment integrity management. This week we’ll finish your training Alan. It sounds like you saved the best till last. It’s been very good of you Bill to take the time to show and explain to me all these ideas and methods that we need to bring into the company. I’m glad that you have been such a willing student. Turning them into reality will not be so easy. Copyright 2009 Business Industrial Network www.BIN95.com
6.
7. Understanding and Measuring Risk Risk ($/Yr) = Chance of Occurrence (/Yr) x Consequence of Occurrence ($) Risk is the product of probability or chance that an event will happen and the cost if it does. Operating risk is the size of the financial loss that will be incurred from a failure during operation. The risk formula is a power law. Power laws have particular properties. For example they are ‘ scale-free ’. In the case of risk this means the risk equation applies to every size of risk. They are ‘typically a signature of some process governed by strong interaction between the ‘decision-making’ agents in the system’. This implies that risk does not arise entirely randomly; rather it is affected by the ‘decision-makers’ present in a system. Situations that follow power laws have a higher number of large events occurring than those of a normal distribution. For risk this means that catastrophic events will occur more often than by pure chance. In power-law-mirrored events a few factors have huge impacts while all the numerous rest have little effect. For risk this means there are a few key factors that influence the likelihood of catastrophe. Control these factors and you increase the chance of success. They are known as the critical success factors. You identify them by asking, “What affects the ability to meet the objective?” For example, only about 3% of parts in equipment cause repeated problems. If these parts were identified and were then well treated and maintained, you would suffer far fewer forced stoppages of equipment. Copyright 2009 Business Industrial Network www.BIN95.com
8. How the Swiss Cheese Holes Line Up Hazard Consequences What barriers should be in place? What is the likely cause of holes in the barriers? -Answer two questions Copyright 2009 Business Industrial Network www.BIN95.com
9. What is a High Potential Incident? ESCALATION BARRIERS THREAT BARRIERS T H R E A T S C O N S E Q U E N C E S HAZARD ACTUAL CONSEQUENCES Event “ high potential incident” means an incident not causing loss or damage but, under different circumstances would result in an accident. Copyright 2009 Business Industrial Network www.BIN95.com
10. Copyright 2009 Business Industrial Network www.BIN95.com Go To www.BIN95.com today For more Industrial Training …
Editor's Notes
PLC Training by Business Industrial Network 12/29/03 www.bin95.com Business Industrial Network www.BIN95.com See http://www.bin95.com/ebooks/index.htm#powerpoints to download full 4 day course of 354 slides in 4 PPT files and 54 page workbook. And download other related course powerpoints.
Welcome to the final day of the course. Four days straight in any training situation is hard work. This course is a useful overview of the many issues that you need to get right if you want rotating equipment health with a lifetime of excellent operation. Use the course to focus your future maintenance management strategies and workforce training efforts on those things that make the big difference to your operation’s rotating equipment performance.
Just a quick reminder of what was done on Day 3 to provide some continuity between the days of the course.
Day 4 list of topics to present and simple exercises to do. Most of the day is about systems and processes that provide and support rotating equipment excellence. The mechanics of what must be done to get RE reliability was covered in Days 1 to 3. Today you will learn how to put them into business systems that make them happen.
Maintenance is a risk management device. You need to understand the game of risk that you are really playing with your business if you want to get the right results.
We live in a probabilistic universe where nothing is certain. Anytime a situation can go a number of ways, you have a probabilistic event. Sometimes things will go one way, sometimes another way. If the path taken leads to bad outcomes, where there is loss, you have suffered a bad risk. Risk is a measure of the value of a chance event.
Each threat or escalation barrier can be represented as a piece of Swiss cheese The holes represent weaknesses in the processes that form part of the barrier. The weakness can relate to the design of the process or its implementation. If the holes in the threat barriers line up this forms the chain of events that lead from a hazard to an event. If the holes in the escalation barriers line up this forms the chain of events that leads from an event into a consequence.
PLC Training by Business Industrial Network 12/29/03 www.bin95.com Business Industrial Network www.BIN95.com