RLC transmission.ppt
•Download as PPT, PDF•
0 likes•4 views
This chapter discusses transmission line parameters and properties relevant for digital applications. It covers causality, transmission line structures, using a time domain reflectometer to measure transmission lines, propagation of waves on transmission lines, methods to measure transmission line inductance and capacitance, factors that influence the internal resistance and inductance of round-wire transmission lines including proximity effects, and slow wave modes on printed circuit boards.
Report
Share
Report
Share
Recommended
Introduction to Power Electronics Students Version.ppt
The document discusses power electronics and power semiconductor devices. It explains that power electronics involves using solid-state electronics like power devices and integrated circuits to control and convert electric power. Some key applications of power electronics mentioned include motor control, power supplies, vehicle propulsion systems, and HVDC transmission. The document also provides examples of different types of power converters like AC-DC converters, DC-DC converters, and DC-AC inverters. It describes the operating principles and voltage/current characteristics of these converters.
windenergy.ppt
This document discusses various aspects of wind turbine power electronics and control systems. It begins with basics on how wind turbines convert kinetic wind energy into rotational energy. It then covers different types of generators that can be used, such as asynchronous and synchronous, and various ways to connect them to the electrical grid directly or via power converters. The document also discusses methods for controlling the turbine speed, such as pitch control and stall control, as well as optimizing the turbine's performance through control of the generator excitation or frequency. Finally, it provides two examples of control strategies - one for a fixed speed grid-connected system and one for a variable speed system with pitch control.
MAT1033.12.4.ppt
This document discusses solving nonlinear systems of equations. It covers solving systems by substitution, elimination, and a combination of methods. The objectives are to solve nonlinear systems using substitution, elimination of two second-degree equations, and a mixed approach. Examples are provided to demonstrate each technique.
Newton.ppt
This document outlines Newton's method for solving nonlinear equations and systems of equations. It begins by introducing nonlinear problems and iterative methods for solving them. It then derives Newton's method, showing that it provides quadratic convergence near the solution. The document discusses applying Newton's method to multidimensional systems using the Jacobian matrix and iterative linearization. It also covers testing for convergence and techniques for improving convergence such as damping and continuation methods.
Thesis schematics.pptx
This document discusses various components involved in wind energy conversion systems including permanent magnet synchronous generators (PMSG), doubly fed induction generators (DFIG), squirrel cage induction generators (SCIG), and their connection to the grid through power converters. It describes the power flow from the wind turbine through a permanent magnet synchronous generator, rectifier, DC-link, inverter, and filter before connecting to the grid. It also mentions use of energy storage systems and flexible AC transmission systems to help integrate wind power onto the grid.
NAWEA2015_NOVOA_Final_MODIFIED.pptx
This document discusses the design of closed-loop control for region 2 operation of a wind turbine using a continuously variable transmission (CVT). It motivates using a CVT to reduce the cost of wind energy and improve capture. It outlines presenting the modeling of the rotor-drivetrain-generator system and developing closed-loop CVT control. The performance of the full modeled system is analyzed through simulations using 10 minutes of recorded wind data.
Presentation-for-teachers.pptx
Uneven heating of the Earth's surface and its rotation cause global wind patterns and local wind variations. As air rises and falls on the planet, pressure differences drive global wind circulation. Additional localized patterns arise from terrain and other surface factors. Wind speed generally increases with height until turbulence decreases it again near the tropopause. The density of air decreases with increases in altitude and temperature. This document discusses how to calculate the power available in wind and energy production from wind resources using power curves and wind speed data. Key factors in the economics of wind energy projects are the levelized cost of energy and the capacity factor.
62-power-semiconductor-devices.ppt
The document provides information about various power semiconductor devices. It begins with an overview of topics covered, which include semiconductor devices, controlled rectifiers, DC choppers, inverters, and AC choppers. It then discusses numerous power semiconductor devices in detail, including their structures, characteristics, and applications. Devices covered include power diodes, power transistors (BJTs, MOSFETs, IGBTs, SITs), thyristors (SCRs, triacs, GTOs, SITHs, MCTs), and provides comparisons of their performance and specifications. The document aims to educate about the operating principles and applications of important power electronics components.
Recommended
Introduction to Power Electronics Students Version.ppt
The document discusses power electronics and power semiconductor devices. It explains that power electronics involves using solid-state electronics like power devices and integrated circuits to control and convert electric power. Some key applications of power electronics mentioned include motor control, power supplies, vehicle propulsion systems, and HVDC transmission. The document also provides examples of different types of power converters like AC-DC converters, DC-DC converters, and DC-AC inverters. It describes the operating principles and voltage/current characteristics of these converters.
windenergy.ppt
This document discusses various aspects of wind turbine power electronics and control systems. It begins with basics on how wind turbines convert kinetic wind energy into rotational energy. It then covers different types of generators that can be used, such as asynchronous and synchronous, and various ways to connect them to the electrical grid directly or via power converters. The document also discusses methods for controlling the turbine speed, such as pitch control and stall control, as well as optimizing the turbine's performance through control of the generator excitation or frequency. Finally, it provides two examples of control strategies - one for a fixed speed grid-connected system and one for a variable speed system with pitch control.
MAT1033.12.4.ppt
This document discusses solving nonlinear systems of equations. It covers solving systems by substitution, elimination, and a combination of methods. The objectives are to solve nonlinear systems using substitution, elimination of two second-degree equations, and a mixed approach. Examples are provided to demonstrate each technique.
Newton.ppt
This document outlines Newton's method for solving nonlinear equations and systems of equations. It begins by introducing nonlinear problems and iterative methods for solving them. It then derives Newton's method, showing that it provides quadratic convergence near the solution. The document discusses applying Newton's method to multidimensional systems using the Jacobian matrix and iterative linearization. It also covers testing for convergence and techniques for improving convergence such as damping and continuation methods.
Thesis schematics.pptx
This document discusses various components involved in wind energy conversion systems including permanent magnet synchronous generators (PMSG), doubly fed induction generators (DFIG), squirrel cage induction generators (SCIG), and their connection to the grid through power converters. It describes the power flow from the wind turbine through a permanent magnet synchronous generator, rectifier, DC-link, inverter, and filter before connecting to the grid. It also mentions use of energy storage systems and flexible AC transmission systems to help integrate wind power onto the grid.
NAWEA2015_NOVOA_Final_MODIFIED.pptx
This document discusses the design of closed-loop control for region 2 operation of a wind turbine using a continuously variable transmission (CVT). It motivates using a CVT to reduce the cost of wind energy and improve capture. It outlines presenting the modeling of the rotor-drivetrain-generator system and developing closed-loop CVT control. The performance of the full modeled system is analyzed through simulations using 10 minutes of recorded wind data.
Presentation-for-teachers.pptx
Uneven heating of the Earth's surface and its rotation cause global wind patterns and local wind variations. As air rises and falls on the planet, pressure differences drive global wind circulation. Additional localized patterns arise from terrain and other surface factors. Wind speed generally increases with height until turbulence decreases it again near the tropopause. The density of air decreases with increases in altitude and temperature. This document discusses how to calculate the power available in wind and energy production from wind resources using power curves and wind speed data. Key factors in the economics of wind energy projects are the levelized cost of energy and the capacity factor.
62-power-semiconductor-devices.ppt
The document provides information about various power semiconductor devices. It begins with an overview of topics covered, which include semiconductor devices, controlled rectifiers, DC choppers, inverters, and AC choppers. It then discusses numerous power semiconductor devices in detail, including their structures, characteristics, and applications. Devices covered include power diodes, power transistors (BJTs, MOSFETs, IGBTs, SITs), thyristors (SCRs, triacs, GTOs, SITHs, MCTs), and provides comparisons of their performance and specifications. The document aims to educate about the operating principles and applications of important power electronics components.
basicsinstrumentandcontrol-170425220125.pptx
The document provides an overview of an instrumentation and control course, including topics such as pressure, flow, level, and temperature measurement, as well as control valves, loops, and systems. The course contents section details concepts related to process measurement and control, including control loops and components, classifications of control loops, piping and instrumentation diagrams, and basic process measurement terminology.
62-power-semiconductor-devices (1).ppt
The document discusses various power semiconductor devices. It covers topics such as power diodes, power transistors including BJTs, MOSFETs, IGBTs, and SITs. For each device type, it discusses the basic structure, V-I characteristics, and applications. It also covers thyristors such as SCR, TRIAC, GTO, and their working principles including forward and reverse blocking modes, and triggering methods. The document contains detailed information on the structural features and operating characteristics of various important power semiconductor devices.
Lecture-slides_-Literature-review (1).pptx
This document provides a 5-step guide to conducting a literature review. It explains that a literature review surveys scholarly sources on a topic, provides an overview of current knowledge, and identifies gaps. The 5 steps are: 1) searching for relevant literature using keywords and databases; 2) evaluating and selecting sources; 3) identifying themes, debates and gaps; 4) outlining the structure; and 5) writing the literature review, which typically includes an introduction, body and conclusion. The document emphasizes finding trends over time, engaging with debates, and discussing implications and suggestions for future research.
LoadModeling.ppt
This document provides an overview of load modeling and induction motor modeling. It discusses how load modeling is important for transient stability simulations but challenging due to the diverse and changing nature of loads. Static load models like the ZIP model are commonly used to represent aggregate load behavior. Induction motors make up a large portion of load and can be modeled statically or dynamically, with the dynamic model typically being a third-order model that neglects stator transients. The document provides details on modeling differences between induction motors and synchronous machines. It also discusses stalled motor operation during voltage disturbances.
LoadModeling (1).ppt
This document provides an overview of load modeling and induction motor modeling. It discusses how load modeling is important for transient stability simulations but challenging due to the diverse and changing nature of loads. Static load models like the ZIP model are commonly used to represent aggregate load behavior. Induction motors make up a large portion of load and can be modeled statically or dynamically, with the dynamic model typically being a third-order model that neglects stator transients. The document provides details on modeling considerations and differences between modeling induction motors versus synchronous machines.
facts__unit-5_and_6.pptx
The document discusses Flexible AC Transmission Systems (FACTS). It defines FACTS as power electronic devices used to improve controllability and increase power transfer capability of AC transmission systems. It describes several types of FACTS devices including static var compensators (SVCs), static synchronous compensators (STATCOMs), and unified power flow controllers (UPFCs). The document compares the characteristics of SVCs and STATCOMs, noting STATCOMs provide faster response time, require less space, and can exchange real power, while SVCs have lower losses.
chapter_33_alternating_current_circuits_0.pptx
A capacitor in an AC circuit leads the voltage by 90 degrees. As frequency increases, capacitive reactance decreases and maximum current increases. For a 2-μF capacitor connected to a 120-V, 60-Hz source, the effective current is 90.5 mA and peak current is 128 mA.
Tranp.pptx
This document discusses the characteristics and performance of power transmission lines. It defines short, medium, and long transmission lines based on their length and voltage levels. It describes how the line constants of resistance, inductance, and capacitance affect voltage drop and power losses. Methods for calculating voltage regulation, line losses, and transmission efficiency are presented for short lines using a lumped parameter model and for medium lines using nominal T and pi models that lump the distributed capacitance. Examples are provided to demonstrate calculations for short and medium line performance.
ECE4762011_Lect14.ppt
1) This lecture discusses power flow analysis and modeling voltage dependent loads. It introduces the Newton-Raphson power flow method and approximations like the decoupled power flow and fast decoupled power flow that reduce computation time.
2) The professor announces upcoming homework and exam details. Voltage dependent loads are modeled using their real and reactive power as functions of voltage magnitude and angle.
3) Examples are provided to demonstrate modeling a constant impedance load and solving a two bus system using the dishonest Newton-Raphson method where the Jacobian is only calculated on the first iteration.
powerflowproblem.ppt
1) This lecture discusses power flow analysis and modeling voltage dependent loads. It introduces the Newton-Raphson power flow method and approximations like the decoupled power flow and fast decoupled power flow that reduce computation time.
2) The professor announces upcoming homework and exam details. Voltage dependent loads are modeled using their real and reactive power as functions of voltage magnitude and angle.
3) Examples are provided to demonstrate modeling a constant impedance load and solving a two bus system using the dishonest Newton-Raphson method where the Jacobian is only calculated on the first iteration.
Load_Flow.pptx
Power flow studies analyze the steady state operation of power systems by calculating the voltage magnitude and angle at each bus. They use numerical methods like Gauss-Seidel and Newton-Raphson to solve the nonlinear power flow equations iteratively. Power flow studies classify buses as load buses with specified real and reactive power, generator/voltage controlled buses that control voltage magnitude, and a reference slack bus that balances the system.
NSECOMPILED QUESTIONS.pdf
The document discusses various topics related to electrical engineering concepts like insulation, breakdown mechanisms, testing methods, and tariff structures. Some key points:
1) It discusses different theories of insulation breakdown like formative time lag, statistical time lag, Paschen's law, bubble theory, and stressed oil volume theory.
2) It covers insulation testing methods like breakdown tests and impulse testing used to evaluate insulation strength.
3) It explains different tariff structures used for electricity billing like two-part tariff, three-part tariff, block rate tariff and their advantages or disadvantages.
Computer-Methods-in-Power-Systems.pptx
This document describes the Fast Decoupled Load Flow (FDLF) method for solving power system load flow problems. FDLF is based on the principle that real and reactive power are primarily governed by voltage angles and magnitudes, respectively. The method forms reduced Jacobian matrices J1 and J4 relating real/reactive power to angles/magnitudes. It then iteratively solves for voltage angle and magnitude corrections using these matrices until power mismatches converge to zero. The document provides an example applying FDLF to a 3-bus system in MATLAB, demonstrating the formation of the reduced Jacobian and iterative solution process.
ECE4762011_Lect14.ppt
1) This lecture discusses power flow analysis and modeling voltage dependent loads. It introduces the Newton-Raphson power flow method and approximations like the decoupled power flow and fast decoupled power flow that reduce computation time.
2) The professor announces upcoming homework and exam details. Voltage dependent loads are modeled using their real and reactive power as functions of voltage magnitude and angle.
3) Examples are provided to demonstrate modeling a constant impedance load and solving a two bus system using the dishonest Newton-Raphson method where the Jacobian is only calculated on the first iteration.
Chapter2.ppt
This chapter discusses transmission line parameters and properties relevant for digital applications. It covers causality, transmission line structures, using a time domain reflectometer to measure transmission lines, propagation of waves on transmission lines, methods to measure transmission line inductance and capacitance, factors that influence the internal resistance and inductance of round-wire transmission lines including proximity effects, and properties of printed circuit board materials that affect signal propagation and the potential for slow wave modes.
BRUNO.pptx
1) The document presents a seminar on controlling a switched reluctance machine operating in generating mode using a microcontroller.
2) A mathematical model of the switched reluctance machine is developed using analytical modeling techniques to determine flux linkage and inductance.
3) A power converter circuit, rotor position and speed sensors, and control feedback system are modeled in MATLAB and interfaced with a microcontroller.
4) The microcontroller is programmed to control the speed and current of the switched reluctance generator based on the mathematical model and simulations.
BRUNO GODSPOWER - Research Proposal _PPT (for my use).pptx
This document provides an outline for a research proposal on analyzing the performance of a switched reluctance machine operating in generating mode. The proposal aims to 1) conduct finite element analysis and MATLAB simulations of a switched reluctance generator, 2) mitigate acoustic noise and torque ripple using intelligent controllers, and 3) optimize firing angles using a firefly algorithm. The expected results are reduction of torque ripple and noise, and verification of simulations through laboratory experiments coupling the generator to a wind turbine. A timeline outlines milestones over 24 months including literature review, modeling, experimentation, results analysis, and publications.
VFDtraining.pptx
The document summarizes the basics of variable frequency drives (VFDs). It discusses the four main sections of a VFD: rectifier, intermediate circuit, inverter, and control/regulation. It explains how VFDs work by converting AC power to DC and then pulsing the motor to control its speed. VFDs allow controlling motor speed to match system demands, reducing energy usage. The document provides examples of power savings from installing VFDs on pumps and fans. It outlines important considerations for VFD installation and conclusive advantages like energy savings, better process control, and reduced maintenance.
PV physic.pptx
This document provides an overview of the physics of photovoltaic (PV) cells. It begins by outlining the learning objectives of explaining basics of PV technology, understanding semiconductors, and explaining doping and the PN-junction. It then covers topics like the photoelectric effect, basics of semiconductors using silicon as an example, intrinsic and extrinsic conductivity through doping with boron and phosphorus to create the PN-junction. The final section discusses how light is absorbed in the P-layer to accelerate electrons to the N-layer through an external circuit and back to the P-layer, generating a voltage and current.
hybrid System.pptx
This document discusses hybrid mini-grid systems that combine renewable energy sources like solar and wind with diesel generators. Hybrid systems can reduce fuel costs and emissions while improving energy independence and reliability. Mini-grids can have AC-coupled or DC-coupled configurations, with AC coupling allowing for longer distribution but with some conversion losses. Proper control strategies and safety features are needed to integrate different generator sources and prevent feedback into the main grid during outages.
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
More Related Content
More from Godspower Bruno, GMNSE
basicsinstrumentandcontrol-170425220125.pptx
The document provides an overview of an instrumentation and control course, including topics such as pressure, flow, level, and temperature measurement, as well as control valves, loops, and systems. The course contents section details concepts related to process measurement and control, including control loops and components, classifications of control loops, piping and instrumentation diagrams, and basic process measurement terminology.
62-power-semiconductor-devices (1).ppt
The document discusses various power semiconductor devices. It covers topics such as power diodes, power transistors including BJTs, MOSFETs, IGBTs, and SITs. For each device type, it discusses the basic structure, V-I characteristics, and applications. It also covers thyristors such as SCR, TRIAC, GTO, and their working principles including forward and reverse blocking modes, and triggering methods. The document contains detailed information on the structural features and operating characteristics of various important power semiconductor devices.
Lecture-slides_-Literature-review (1).pptx
This document provides a 5-step guide to conducting a literature review. It explains that a literature review surveys scholarly sources on a topic, provides an overview of current knowledge, and identifies gaps. The 5 steps are: 1) searching for relevant literature using keywords and databases; 2) evaluating and selecting sources; 3) identifying themes, debates and gaps; 4) outlining the structure; and 5) writing the literature review, which typically includes an introduction, body and conclusion. The document emphasizes finding trends over time, engaging with debates, and discussing implications and suggestions for future research.
LoadModeling.ppt
This document provides an overview of load modeling and induction motor modeling. It discusses how load modeling is important for transient stability simulations but challenging due to the diverse and changing nature of loads. Static load models like the ZIP model are commonly used to represent aggregate load behavior. Induction motors make up a large portion of load and can be modeled statically or dynamically, with the dynamic model typically being a third-order model that neglects stator transients. The document provides details on modeling differences between induction motors and synchronous machines. It also discusses stalled motor operation during voltage disturbances.
LoadModeling (1).ppt
This document provides an overview of load modeling and induction motor modeling. It discusses how load modeling is important for transient stability simulations but challenging due to the diverse and changing nature of loads. Static load models like the ZIP model are commonly used to represent aggregate load behavior. Induction motors make up a large portion of load and can be modeled statically or dynamically, with the dynamic model typically being a third-order model that neglects stator transients. The document provides details on modeling considerations and differences between modeling induction motors versus synchronous machines.
facts__unit-5_and_6.pptx
The document discusses Flexible AC Transmission Systems (FACTS). It defines FACTS as power electronic devices used to improve controllability and increase power transfer capability of AC transmission systems. It describes several types of FACTS devices including static var compensators (SVCs), static synchronous compensators (STATCOMs), and unified power flow controllers (UPFCs). The document compares the characteristics of SVCs and STATCOMs, noting STATCOMs provide faster response time, require less space, and can exchange real power, while SVCs have lower losses.
chapter_33_alternating_current_circuits_0.pptx
A capacitor in an AC circuit leads the voltage by 90 degrees. As frequency increases, capacitive reactance decreases and maximum current increases. For a 2-μF capacitor connected to a 120-V, 60-Hz source, the effective current is 90.5 mA and peak current is 128 mA.
Tranp.pptx
This document discusses the characteristics and performance of power transmission lines. It defines short, medium, and long transmission lines based on their length and voltage levels. It describes how the line constants of resistance, inductance, and capacitance affect voltage drop and power losses. Methods for calculating voltage regulation, line losses, and transmission efficiency are presented for short lines using a lumped parameter model and for medium lines using nominal T and pi models that lump the distributed capacitance. Examples are provided to demonstrate calculations for short and medium line performance.
ECE4762011_Lect14.ppt
1) This lecture discusses power flow analysis and modeling voltage dependent loads. It introduces the Newton-Raphson power flow method and approximations like the decoupled power flow and fast decoupled power flow that reduce computation time.
2) The professor announces upcoming homework and exam details. Voltage dependent loads are modeled using their real and reactive power as functions of voltage magnitude and angle.
3) Examples are provided to demonstrate modeling a constant impedance load and solving a two bus system using the dishonest Newton-Raphson method where the Jacobian is only calculated on the first iteration.
powerflowproblem.ppt
1) This lecture discusses power flow analysis and modeling voltage dependent loads. It introduces the Newton-Raphson power flow method and approximations like the decoupled power flow and fast decoupled power flow that reduce computation time.
2) The professor announces upcoming homework and exam details. Voltage dependent loads are modeled using their real and reactive power as functions of voltage magnitude and angle.
3) Examples are provided to demonstrate modeling a constant impedance load and solving a two bus system using the dishonest Newton-Raphson method where the Jacobian is only calculated on the first iteration.
Load_Flow.pptx
Power flow studies analyze the steady state operation of power systems by calculating the voltage magnitude and angle at each bus. They use numerical methods like Gauss-Seidel and Newton-Raphson to solve the nonlinear power flow equations iteratively. Power flow studies classify buses as load buses with specified real and reactive power, generator/voltage controlled buses that control voltage magnitude, and a reference slack bus that balances the system.
NSECOMPILED QUESTIONS.pdf
The document discusses various topics related to electrical engineering concepts like insulation, breakdown mechanisms, testing methods, and tariff structures. Some key points:
1) It discusses different theories of insulation breakdown like formative time lag, statistical time lag, Paschen's law, bubble theory, and stressed oil volume theory.
2) It covers insulation testing methods like breakdown tests and impulse testing used to evaluate insulation strength.
3) It explains different tariff structures used for electricity billing like two-part tariff, three-part tariff, block rate tariff and their advantages or disadvantages.
Computer-Methods-in-Power-Systems.pptx
This document describes the Fast Decoupled Load Flow (FDLF) method for solving power system load flow problems. FDLF is based on the principle that real and reactive power are primarily governed by voltage angles and magnitudes, respectively. The method forms reduced Jacobian matrices J1 and J4 relating real/reactive power to angles/magnitudes. It then iteratively solves for voltage angle and magnitude corrections using these matrices until power mismatches converge to zero. The document provides an example applying FDLF to a 3-bus system in MATLAB, demonstrating the formation of the reduced Jacobian and iterative solution process.
ECE4762011_Lect14.ppt
1) This lecture discusses power flow analysis and modeling voltage dependent loads. It introduces the Newton-Raphson power flow method and approximations like the decoupled power flow and fast decoupled power flow that reduce computation time.
2) The professor announces upcoming homework and exam details. Voltage dependent loads are modeled using their real and reactive power as functions of voltage magnitude and angle.
3) Examples are provided to demonstrate modeling a constant impedance load and solving a two bus system using the dishonest Newton-Raphson method where the Jacobian is only calculated on the first iteration.
Chapter2.ppt
This chapter discusses transmission line parameters and properties relevant for digital applications. It covers causality, transmission line structures, using a time domain reflectometer to measure transmission lines, propagation of waves on transmission lines, methods to measure transmission line inductance and capacitance, factors that influence the internal resistance and inductance of round-wire transmission lines including proximity effects, and properties of printed circuit board materials that affect signal propagation and the potential for slow wave modes.
BRUNO.pptx
1) The document presents a seminar on controlling a switched reluctance machine operating in generating mode using a microcontroller.
2) A mathematical model of the switched reluctance machine is developed using analytical modeling techniques to determine flux linkage and inductance.
3) A power converter circuit, rotor position and speed sensors, and control feedback system are modeled in MATLAB and interfaced with a microcontroller.
4) The microcontroller is programmed to control the speed and current of the switched reluctance generator based on the mathematical model and simulations.
BRUNO GODSPOWER - Research Proposal _PPT (for my use).pptx
This document provides an outline for a research proposal on analyzing the performance of a switched reluctance machine operating in generating mode. The proposal aims to 1) conduct finite element analysis and MATLAB simulations of a switched reluctance generator, 2) mitigate acoustic noise and torque ripple using intelligent controllers, and 3) optimize firing angles using a firefly algorithm. The expected results are reduction of torque ripple and noise, and verification of simulations through laboratory experiments coupling the generator to a wind turbine. A timeline outlines milestones over 24 months including literature review, modeling, experimentation, results analysis, and publications.
VFDtraining.pptx
The document summarizes the basics of variable frequency drives (VFDs). It discusses the four main sections of a VFD: rectifier, intermediate circuit, inverter, and control/regulation. It explains how VFDs work by converting AC power to DC and then pulsing the motor to control its speed. VFDs allow controlling motor speed to match system demands, reducing energy usage. The document provides examples of power savings from installing VFDs on pumps and fans. It outlines important considerations for VFD installation and conclusive advantages like energy savings, better process control, and reduced maintenance.
PV physic.pptx
This document provides an overview of the physics of photovoltaic (PV) cells. It begins by outlining the learning objectives of explaining basics of PV technology, understanding semiconductors, and explaining doping and the PN-junction. It then covers topics like the photoelectric effect, basics of semiconductors using silicon as an example, intrinsic and extrinsic conductivity through doping with boron and phosphorus to create the PN-junction. The final section discusses how light is absorbed in the P-layer to accelerate electrons to the N-layer through an external circuit and back to the P-layer, generating a voltage and current.
hybrid System.pptx
This document discusses hybrid mini-grid systems that combine renewable energy sources like solar and wind with diesel generators. Hybrid systems can reduce fuel costs and emissions while improving energy independence and reliability. Mini-grids can have AC-coupled or DC-coupled configurations, with AC coupling allowing for longer distribution but with some conversion losses. Proper control strategies and safety features are needed to integrate different generator sources and prevent feedback into the main grid during outages.
More from Godspower Bruno, GMNSE (20)
BRUNO GODSPOWER - Research Proposal _PPT (for my use).pptx
BRUNO GODSPOWER - Research Proposal _PPT (for my use).pptx
Recently uploaded
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaRecently uploaded (20)
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
RLC transmission.ppt
- 1. 1 Interconnect and Packaging Chapter 2: Transmission Line Parameters Chung-Kuan Cheng UC San Diego
- 2. Outline • Causality • Transmission Lines for Digital Applications • Transmission Line Structures • Time Domain Reflectometer • LC Measurement • Internal RL Analysis • Proximity Effect • PCB Properties • Slow Waves 2
- 3. Causality 3
- 4. Transmission Lines for Digital Systems 4
- 6. Time Domain Reflectometer TDR 6
- 11. Internal Impedance of Round-Wire 11
- 13. Proximity Effect via Eddy Current 13
- 14. Properties of PCB Materials 14