Hy I am working experience in Upstream Instrumentation and Gas Metering with project ,operation and Maintenance of Different Field Instrument as well as diffferent types of meters and flow computers.

1. RISHIT MEHTA (INSTRUMENTATION & CONTROL ENGG.)
Present Address: 548/1, Mahavir Nagar, Permanent Address :B/18 , Vardhman Nagar,
Gandhinagar ,382021 Second Floor ,Hirji Mistry Road,Email:
rishit.eng08@yahoo.com Jamnagar ,361005
rcm.lattest@gmail.com (M)8347009535
Key Attainment Work Summary:
A result oriented professional with over 6+ years (6.7 years) of rich experience in the oil and natural
gas industry with the areas of Project installation, erection & Commissioning with Maintenance of
different field instruments, Gas Chromatograph, YZ odorizing, loop controller ,FCV .etc. with
SCADA Connectivity operation. Working knowledge of SAP R3, (PM, MM& DM Module). Adept
at installation and commissioning operations with demonstrated abilities in working on initiatives,
thereby bringing down plant breakdown & achieving annual cost savings. A keen planner and
strategist with skills in troubleshooting and team building capability with well-developed problem
solving abilities and good verbal/written communication skills.
Career Objective
To become valuable professional in the field of Instrumentation and Control for seeking new
challenging assignments to work in an innovative and competitive world with any organisation.
Professional Background and Accomplishments:
Gujarat Gas Company
Ltd,(GSPC Group
company)
Surat, Gujarat (India)
Senior Engineer-
Instrumentation& Gas Metering
(Project & Maintenance).
August-2012 to till date
Key Job Responsibility Achievement:-
Installation & Commissioning:
 Hands on experience of Rotary/Turbine/orifice/ultrasonic based Custody Transfer Measurements for
Natural Gas with flow computer/EVC erection, installation and commissioning with calibration of
different field instruments at site.
 Detail Engineering (Designing, Sizing & Selection of Meters...etc) with upstream or downstream
metering systems used in Higher/Lower Pressure Regulating Gas skid.
 More than 500 pressure Metering Regulation Station (MRS) installed & commissioned with
different mechanical (Primary element) gas meters (RPD, Turbine, orifice...etc.) with digital
(Secondary element) meters (EVC, Flow computer) configuration at site as per AGA Standard.
 Installed New Experion-410 HS (M/s Honeywell) version of SCADA software in Central Control
Room through different RTU installed at various site with communication done through V-Sat
Technology.
 Installed and commissioned of Open path and point type gas detector instrument of M/s Spectrum &
M/s Sensitron make at Mora location efficaciously.
Operation & Maintenance:
 Carry out Calibration, validation and maintenance of field instruments as well as CTM and Gas
Chromatograph as per different AGA Standard with respect to ERP/SAP PM module plan.
 Ensure required spares availability at all the time without increasing unnecessary inventory for opex
saving.
 Ensuring metering accuracy as per AGA standards at Custody Transfer Meters for NG
Suppliers.
 Trouble shooting and root cause analysis complaints of the Custody Transfer Flow Meters &
downstream metering related system like RPD, PD & TURBINE METERS with EVC & Flow
computer.
 100 No’s of Meter Replacement with calibrated another meters and sending existing meters for

2. calibration at NABL Certified Laboratories.
 Analysis of different report with the help of AMR software, opex value of company will down with
inventory management.
Quality Assurance/Documentation/Tendering & proposal
 Documentation for ensuring compliance of various quality standards such as ISO 9001,
ISO 14001 and OHSAS 18001.
 Facing periodic external & internal audits. Special focus on HSSE (Behaviour Based Safety).
Ensuring compliance to permit to work system, Height work, Hot works as per company
HSSE policy.
 Analysis & review of Metering instrumentation related data for maintaining metering accuracy
As per AGA Standards Initiating new initiatives as per technical up gradation.
 Monitoring of LUAG (Loss of Un-Accounted Gas) for company Profit analysis.
 Review of Quality assurance and Quality checks as per QAP, engineering drawings, codes,
Standards and good engineering practices during FAT/SAT.
 Prepare Bid Evaluation Criteria for preparation of New Tender Documents for Materials/Services.
Past Professional Experience :
Sr.
No
Company Name Duration Designation Department Major Responsibility
1
GSPC GAS
COMPANY
LIMITED
MAR -2010
to July-2012
Engineer
Instrumentation
- Industrial Gas
Metering
Responsible for Metering
related Maintenance of more
than 600 Industrial
customers in MORBI
(RAJKOT) site.
2
RMG Autometers
India Pvt .Ltd
FEB-2010 to
MAR-2010
Engineer
Service
Engineer/Busin
ess
development
Erection and commissioning
of RMG Make product of
meters, regulator ..and
service part also in all
Gujarat.
3
Sabarmati Gas
Limited(SGL) (Joint
venture of GSPC &
BPCL)
JULY-2008
to JAN-2010
GET to
Executive
O & M, CNG
Maintenance
,Metering
Independent handling &
executionof Pipeline
Projects, Planning, and CNG
Maintenance & Metering
related activities in Kadi City
(Mehsana Dist.)
General Job Responsibility of Different Organisation Are as under:
 Hands on experience of Rotary based Custody Transfer Measurements for Natural Gas.
 Implementation of new AMR (AUTOMATED METER READING) software with Modbus
Protocol based system used for Meter Reading & analysis different parameters Automatically at
schedule time come from Digital EVC through GSM/GPRS Modem installed at site for downstream
customer.
 Installation, Testing, Commissioning of CPRS (Common Pressure Reduction Station).
 Trouble shooting and root cause analysis of the Custody Metering System.
 Experience of Installation and Calibration of PT, TT, Pressure and Temperature gauge.
 Supervision ensuring progress as well as quality.
 Operation & Maintenance of all types of MRS AND DRS.
 Checking, analyzing and taking corrective measures for any gas loss.
SKILLS& COMPETENCIES

3.  Key Skill: ERP/SAP, MM & PM module, proficient Knowledge of Flow measurement standards i.e. AGA3,
AGA7, AGA8, AGA9, extensive experience of Design & detail Engineering, Project management,
configuration of flow meters , SCADA software of Experion- 410 HS installed at Control room.
 Operating Systems: Working knowledge Windows 98, Windows 2000, Windows XP &Windows 7, 8&
MS Office 2007 & 2010 also working.
 Soft Skill: Good leadership, Sincere & hardworking with completing the assigned tasks in time
within team.
ACADEMIC CREDENTIALS
BE (Instrumentation & control) Dharmsinh Desai University(DDU),NADIAD 67% MAY2008
HSC (SCIENCE) GHSEB (JAMNAGAR) GUJARAT. 73% APR-2004
SSC GSEB (JAMNAGAR) GUJARAT 76.43% May-2002
INDUSTRIAL TRAINING/PROJECT:
 Industrial training done on “STUDY OF DIFFERENT INSTRUMENTATION INPLANT” at
Essar Construction (INDIA) Limited (EOL PROJECT) Vadinar, JAMNAGAR during Jan-2008
to May 2008.
 2 day Training Program on Petroleum & Natural Gas Custody Transfer measurement by FCRI-
Ahmedabad.
 Training on Basic Engineering Fundamentals, Nirmal Industrial Controls Pvt Ltd, Baroda.
FIELD OF INTEREST:
 Process Measurement& instrumentation.
 Instrumentation system, maintenance & measurement.
 PLC, DCS & SCADA based Automation application.
 Natural Gas Metering (Instrumentation upstream, middle stream & downstream).
SOFT SKILL TRAINING:
 Training done on Effective Project Management., Result oriented Team Building, time
managementetc.
REFERENCE
Professional
Mr. Dipak Desai(Sr. Manager)
Zonal head of GSPC
GAS (Morbi) 9825150481
Personal
Mr. Manhar Mehta
MS (Ortho) at C.U
Shah Hospital
(Vadhwan) 9427257922
DECLARATION:
I hereby declare that above mentioned information is true as per my knowledge.
Date: ________________ YOURS FAITHFULLY
Place: ________________ RISHIT C MEHTA